Standard Methods Research Articles

The effect of Rebozo technique on perceived labour pain and childbirth experience: A randomized controlled trial.

Pain, stress, and anxiety experienced during childbirth can have detrimental effects on labor and delivery. The rebozo technique is an ancestral method used to minimize pain and enhance relief during gestation. This study aimed to investigate the effects of the rebozo technique on the birth process and its probable benefits on the birth experience. This survey was conducted from January to May 2021 in a randomized and controlled manner. A total of 113 pregnant women with their first children were surveyed. Women between 37 and 41 weeks of gestation without complications who were admitted to the delivery room with a cervical dilation of 4 cm or more were chosen as participants. In the Rebozo group, subjects were randomly selected by trained personnel to apply the standardized method, while the control group received a relaxing massage. Cervical dilation, fetal position, contraction patterns, and measures related to the birth experience were key indicators. Women in the rebozo group had lower pain levels during birth and greater birth satisfaction. Mean cervical dilation in the latent phase was 5.61 cm in the rebozo group and 5.71 cm in the control group. In the active phase, cervical dilatation was 6.03 cm in the rebozo group and 6.68 cm in the control group, and this difference was statistically significant (P < .001). In the transition phase, the birth time was 46.29 minutes in the rebozo group and 68.71 minutes in the control group (P = <.007**). In the total birth experience score, the rebozo group received an average of 68.52 points, while the control group received 51.58 points (P < .001). This research has established that the use of the rebozo technique throughout labor helps enhance her feelings about being pregnant, as well as heightening fulfillment with delivery.

Potential Targets for the Protective Effect of Astaxanthin on Ethanolinduced Damage in Rat Liver Mitochondria.

Alcohol intoxication leads to multiple degenerative disorders in the structure and function of mitochondria. The mechanisms underlying these disorders, as well as ways to prevent them, are an urgent task in biomedicine. We investigate the mechanism of the positive effect of AX on rat liver mitochondria after chronic alcohol administration and suggest the targets of its effects. In this work, we continued our studies of astaxanthin (AX) as a possible protector of mitochondria from the toxic effects of ethanol. In our experiments, we used the Lieber-DeCarly model of chronic alcohol intoxication, which allows high-dose alcohol intake. Four groups of animals were used in the experiments: group 1 (control), group 2 (treated with AX), group 3 (treated with ethanol), and group 4 (treated with ethanol and AX together). Rat liver mitochondria (RLM) were isolated by the standard method modified in our laboratory. A multifunctional chamber with built-in electrodes was used to determine mitochondrial functions. Electrophoresis followed by Western blot analysis was used to detect mitochondrial proteins. Statistical significance was calculated using t-test Student-Newman- Keuls test. AX has been shown to have a positive effect on the functioning of the mitochondrial permeability transition pore (mPTP), the regulation of signaling pathways, as well as mitochondrial dynamics. It was found that AX is able to suppress the degenerative effect of alcohol on liver mitochondria. Targets for the protective action of AX in rat liver mitochondria (RLM) have been proposed. The discovered protective effect of AX on liver mitochondria during alcohol damage may contribute to the development of new strategies for the treatment of alcohol- induced damage.

Iron Dysregulation: Unveiling Predictive Biomarkers for Severity in COVID-19 Patients

Objective: This study aimed to elucidate the association between iron dysregulation and the severity of COVID-19, examining serum levels of iron-related biomarkers in hospitalized patients. The primary objective was to identify reliable predictors for disease severity, specifically focusing on the role of ferritin, Hemoglobin (Hb), Total Iron-binding Capacity (TIBC), and iron. Materials and Methods: The study enrolled 117 consecutive COVID-19 patients, classified into mild, severe, and critical groups. Serum levels of Hb, TIBC, iron, and ferritin were measured using standardized methods. Data were analyzed using ROC analysis, logistic regression models, and correlation assessments. The study adhered to ethical guidelines, obtaining informed consent from all participants. Results: Results revealed a consistent elevation in iron and ferritin levels as disease severity increased, accompanied by a reciprocal decline in Hb and TIBC. Ferritin emerged as a robust predictor for disease prognosis, with an AUC of 0.808, providing a sensitivity of 62.50% and a specificity of 91.74%. Age and education were identified as exacerbating factors influencing patient outcomes. The findings have been found to align with previous studies linking higher ferritin levels to adverse outcomes, supporting ferritin’s utility as a prognostic marker. Conclusion: The intricate relationship between iron metabolism and COVID-19 severity has been highlighted in this study, emphasizing elevated ferritin levels as potential predictors for severe outcomes and indicators of inflammation-induced cellular damage. These findings may contribute valuable insights into personalized patient management strategies and the potential for targeted interventions in severe COVID-19 cases. Further research involving larger populations is essential to validate these observations and enhance our understanding of the complex host response to SARS-CoV-2.

Clinical management of patients diagnosed with acute myeloid leukemia treated with venetoclax in combination with hypomethylating agents after achieving a response: a real-life study.

Although there is an approved indication for venetoclax and hypomethylating agents (VenHMA) and its use in different AML settings will be expanded in the following years, the management of the adverse events (AEs) lacks of harmonized algorithms during treatment of these patients. We have studied the incidence of relevant AEs of 43 patients who achieved a response to VenHMA and its management. Median overall survival of our cohort was 19months. No patients discontinued treatment due to AEs after C3D1, Regarding severe AEs, high rates of grade 4 neutropenia (97.6%) and grade 4 thrombocytopenia (65.1%) were observed. Severe infectious AEs rate was 16%. Due to severe myelotoxicity, most patients required a progressive dose reduction of both venetoclax and hypomethylating agents during follow-up, being 87.8% at C6D1. Transfusional dependence rate was 91% and G-CSF was prescribed to 86% of the patients. Finally, there was not a significant difference in hemoglobin, platelets and absolute neutrophil count after achieving complete response comparing paired samples during follow-up, although cytopenia rate was high during initial follow-up. We conclude that dose reduction of VenHMA after achieving a response in patients diagnosed with AML is required in most patients and essential to avoid prolonged cytopenia-related adverse events and a rapid and standardized method on how to perform it might decrease the AEs rate.

Sport climbing performance determinants and functional testing methods: A systematic review: Running title: Sport climbing functional testing methods.

Sport climbing is becoming incredibly popular both in the general population and among athletes. No consensus exists regarding evidence-based sport-specific performance evaluation; therefore, this systematic review is aimed at analyzing determinants of sport climbing performance and evaluation methods by comparing climbers of different levels. PubMed, Scopus, and Web of Science were searched up to December 20, 2022. Studies providing the self-reported climbing ability associated with different functional outcomes in groups of climbers of contiguous performance levels were eligible. 74 studies were finally included. Various methods have been proposed to evaluate determinants of sport climbing performance. Climbing-specific assessments were able to discriminate climbers of different levels when compared to general functional tests. Test validity resulted high for climbing-specific cardiorespiratory endurance as well as muscular-strength, -endurance, and -power; similarly, reliability was good except for cardiorespiratory endurance. Climbing-specific flexibility assessment resulted in high reliability but moderate validity, whereas balance showed low validity. Considerable conflicting evidence was found regarding anthropometric characteristics. The present analysis identified cardiorespiratory endurance as well as muscular-strength, -endurance, and -power as determinants of sport climbing performance. In contrast, balance, flexibility, and anthropometric characteristics seem to count less. This review also proposes an evidence-based Functional Sport Climbing test battery for assessing performance determinants, which includes tests that have been identified to be valid, reliable, and feasible. While athletes and coaches should rely on evidence-based and standardized evaluation methods, researchers may design specific large-scale trials as a resource for providing additional, homogenous, and comparable data to improve scientific evidence and professionalism in this popular sport discipline.

Modelling and Characterisation of Orthotropic Damage in Aluminium Alloy 2024

The aim of the work presented in this paper was development of a thermodynamically consistent constitutive model for orthotopic metals and determination of its parameters based on standard characterisation methods used in the aerospace industry. The model was derived with additive decomposition of the strain tensor and consisted of an elastic part, derived from Helmholtz free energy, Hill’s thermodynamic potential, which controls evolution of plastic deformation, and damage orthotopic potential, which controls evolution of damage in material. Damage effects were incorporated using the continuum damage mechanics approach, with the effective stress and energy equivalence principle. Material characterisation and derivation of model parameters was conducted with standard specimens with a uniform cross-section, although a number of tests with non-uniform cross-sections were also conducted here. The tests were designed to assess the extent of damage in material over a range of plastic deformation values, where displacement was measured locally using digital image correlation. The new model was implemented as a user material subroutine in Abaqus and verified and validated against the experimental results for aerospace-grade aluminium alloy 2024-T3. Verification was conducted in a series of single element tests, designed to separately validate elasticity, plasticity and damage-related parts of the model. Validation at this stage of the development was based on comparison of the numerical results with experimental data obtained in the quasistatic characterisation tests, which illustrated the ability of the modelling approach to predict experimentally observed behaviour. A validated user material subroutine allows for efficient simulation-led design improvements of aluminium components, such as stiffened panels and the other thin-wall structures used in the aerospace industry.

Antimicrobial susceptibility of Peruvian Yersinia ruckeri isolates to oxytetracycline and florfenicol using MIC testing.

Yersiniosis, caused by Yersinia ruckeri, has become the most common disease in farmed rainbow trout Oncorhynchus mykiss in Peru, affecting Puno and Junín Regions, important aquaculture areas in the country. Florfenicol (FLO) and oxytetracycline (OXY) are the antimicrobials most frequently used to mitigate losses attributed to this pathogen. This study presents an analysis of the susceptibility patterns of 60 Y. ruckeri isolates (30 isolates each from Puno and Junín), including the type strain CECT 4319T and the strains CECT 955 and CECT 956, against FLO and OXY. Minimum inhibitory concentrations (MICs) were determined following the guideline for standard broth dilution method published by the Clinical and Laboratory Standards Institute. MIC results ranged from 4.0 to 8.0 µg ml-1 for FLO and 0.5 to 4.0 µg ml-1 for OXY. Normalized resistance interpretation (NRI) analysis identified epidemiological cut-off values of ≤16.0 µg ml-1 for FLO and ≤4.0 µg ml-1 for OXY. All Peruvian isolates, including the collection strains, were categorized as wild-type for both antimicrobials. Even though the number of Y. ruckeri isolates with MIC values of 8 µg ml-1 for FLO is more than double in Puno than in Junín (15 vs. 7 isolates), the NRI analysis showed the same epidemiological cutoff of 16 µg ml-1; while for OXY, it was 4.0 µg ml-1 for Puno and 2.0 µg ml-1 for Junín. This study establishes the basis for monitoring susceptibility to FLO and OXY in new Y. ruckeri isolates in Peruvian rainbow trout farming.

Local corticosteroid injection versus surgery for carpal tunnel syndrome.

Carpal tunnel syndrome (CTS) is a very common clinical syndrome manifested by signs and symptoms of irritation of the median nerve at the carpal tunnel in the wrist. Direct and indirect costs of CTS are substantial, with estimated costs of two billion US dollars for CTS surgery in the USA alone. Local corticosteroid injection has been used as a non-surgical treatment for CTS for many years, but its effectiveness is still debated. To evaluate the benefits and harms of corticosteroids injected in or around the carpal tunnel for the treatment of carpal tunnel syndrome (CTS) compared to surgery. We used standard, extensive Cochrane search methods. We searched the Cochrane Neuromuscular Specialised Register, CENTRAL, MEDLINE, Embase, CINAHL, ClinicalTrials.gov, and WHO ICTRP. The latest search was 26 May 2022. We included randomised controlled trials (RCTs) or quasi-randomised trials of adults with CTS that included at least one comparison group of local corticosteroid injection (LCI) into the wrist and one group of any surgical intervention. We used standard Cochrane methods. Our primary outcome was 1. improvement in symptoms at up to three months of follow-up. Our secondary outcomes were 2. functional improvement, 3. improvement in symptoms at greater than three months of follow-up, 4. improvement in neurophysiological parameters, 5. improvement in imaging parameters, 6. improvement in quality of life and 7. We used GRADE to assess the certainty of evidence for each outcome. We included seven studies involving 569 'hands' (although two studies had unusable data for quantitative analyses). All studies used a one-time LCI as a comparator, using several different types and doses of corticosteroids. In every study, for both surgery and LCI groups, all our primary and secondary outcomes showed improvement from pre- to post-treatment. However, evidence from the combined analysis was too uncertain for us to draw reliable conclusions for the comparison of surgical treatment versus LCI with respect to our primary outcome of symptom relief at up to three months' follow-up (standardised mean difference (SMD) 0.63, 95% confidence interval (CI) -0.61 to 1.88; I2 = 95%; 5 trials, 305 participants; very low-certainty evidence). Findings with respect to secondary outcome measures of symptom relief at greater than three months' follow-up (SMD 0.94, 95% CI -0.31 to 2.19; I2 = 93%; 4 trials, 235 participants), functional improvement at up to three months' follow-up (SMD -0.11, 95% CI -0.94 to 0.72; I2 = 84%; 3 trials, 215 participants) and functional improvement at greater than three months' follow-up (SMD 0.19, 95% CI -1.22 to 1.59; I2 = 93%; 3 trials, 185 participants) were also uncertain (very low-certainty evidence) and showed no clear advantage for surgery or LCI. Surgery may improve neurophysiology (median nerve distal motor latency) more than LCI (mean difference (MD) 0.87 ms, 95% CI 0.32 to 1.42; I2 = 72%; 3 trials, 162 participants; low-certainty evidence). Evidence for quality of life and adverse events was also uncertain; quality of life (EuroQol-5D-3L) may be slightly improved after LCI than after surgery (the difference may not be clinically important) (MD 0.07, 95% CI 0.02 to 0.12; 1 trial, 38 participants; very low-certainty evidence) and there may be fewer adverse events with LCI than with surgery (risk ratio (RR) 0.34, 95% CI 0.04 to 3.26; 3 trials, 112 participants; very low-certainty evidence). The evidence comparing LCI to surgery for CTS, either in the short term or up to 12 months' follow-up, is too uncertain for any reliable conclusions to be drawn.

Liver and pancreas transplantation in adult donor and recipients with situs inversus totalis: a case series and review of the literature.

Situs inversus totalis is a rare congenital anomaly characterized by a mirror-image orientation of abdominal, and in some cases, thoracic organs. Here, we report our situs inversus totalis transplantation experience and further review liver transplantations in adult recipients and donors with situs inversus totalis. We describe three cases with situs inversus totalis. The first case was liver transplantation in a recipient (a 61-year-old Iranian man) with situs inversus totalis, the second was a liver transplantation from a donor (a 52-year-old Iranian woman) with situs inversus totalis, and finally, for the first time, a simultaneous pancreas and kidney transplantation in a recipient (a 26-year-old Iranian man) with situs inversus totalis. In patient one, hepatectomy could be performed according to the standard method and on the basis of preoperative studies. Hepatic vein and arterial anastomosis were performed as in every other patient without situs inversus totalis. To prevent biliary complications, a Roux-en-Y hepaticojejunostomy was performed. In patient two, implantation time, suprahepatic vein, portal vein, arterial, and biliary reconstruction could be done as in any other case without situs inversus totalis. Plication of the right-sided diaphragm and fixation of the falciform ligament was done for our patient. In patient three, systemic drainage was preferred to portal flow for establishing the outflow drainage of the pancreas compared with otherwise normal patients. Although situs inversus totalis is a rare condition, our reported techniques are suitable, considering advantages such as easier accessibility, more acceptable placement of the implanted organs regarding vascular variations, and the appropriate location of the allograft in the proximity of other organs.

Construction of Vectors for the Genome Editing of Saccharomyces Yeast Using CRISPR-Cas9 System

New vectors for the yeast genome editing using CRISPR/Cas9 were constructed. A system for cloning of new targets using the standard methods (PCR‒restriction‒ligation) was developed and successfully applied. The constructed vectors allowed us to obtain the sup35-25 mutants, deletion of the PSH1 gene and disruption of the NAM7 (UPF1). A convenient method for identifying plasmids with a new target was tested. A detailed description of the cloning technique used and selection of plasmids with the new targets is provided.

Sustainable Utilization of Novosadska variety Buckwheat as Cultivated Biodiversity-Friendly Crop

Buckwheat is important not only for its role in enhancing soil quality and preventing erosion but also for its excellent nutritional profile, making it suitable for use in functional foods. This study aimed to investigate how long-term storage (3, 6, and 9 months) affects chemical, nutritional, and antioxidative properties, phenolic acids, and the bioflavonoid profiles of Novosadska variety buckwheat. Standard methods were used for quality determinations, and instrumental methods (spectrophotometry, reverse-phase high-performance liquid chromatography) were employed to determine antioxidant activity and bioactive compounds in Novosadska variety buckwheat. One-way ANOVA and Tukey’s HSD post hoc tests were performed for statistical data processing. Throughout the storage period, proximate composition and starch content significantly decreased (p &lt; 0.05), while total carbohydrates, β-glucan, and energy value significantly increased (p &lt; 0.05). Significant decreases in pH and alcoholic acidity (pH = 0.55) and 0.33% DM were observed. Total phenol content and antioxidant activity decreased to 5.57 mg GAE/g DM TPC, 22.20 μmol Fe2+/g DM FRAP, and 8.12 μmol TE/g DM DPPH during storage (p &lt; 0.05). Of the 15 phytochemical compounds, gallic, p-coumaric, trans-cinnamic acids, and epicatechin were highly abundant in this buckwheat variety, with a notable 38% decrease in epicatechin. Dihydrocaffeic and phloretic acids, daidzein, naringin, and naringenin were also quantified in buckwheat. Its easy adaptability to the environment, ability to attract various insects, being a speedy short-season growing plant for food, and numerous nutritional and health benefits give buckwheat the potential to be a sustainable and biodiversity-friendly crop.

Trends in Emissions from Road Traffic in Rapidly Urbanizing Areas

The process of urbanization has facilitated the exponential growth in demand for road traffic, consequently leading to substantial emissions of CO2 and pollutants. However, with the development of urbanization and the expansion of the road network, the distribution and emission characteristics of CO2 and pollutant emissions are still unclear. In this study, a bottom-up approach was initially employed to develop high-resolution emission inventories for CO2 and pollutant emissions (NOx, CO, and HC) from primary, secondary, trunk, and tertiary roads in rapidly urbanizing regions of China based on localized emission factor data. Subsequently, the standard road length method was utilized to analyze the spatiotemporal distribution of CO2 emissions and pollutant emissions across different road networks while exploring their spatiotemporal heterogeneity. Finally, the influence of elevation and surface vegetation cover on traffic-related CO2 and pollutant emissions was taken into consideration. The results indicated that CO2, CO, HC, and NOx emissions increased significantly in 2020 compared to those in 2017 on trunk roads, and the distribution of CO2 and pollutant emissions in Fuzhou was uneven; in 2017, areas of high emissions were predominantly concentrated in the central regions with low vegetation coverage levels and low topography but expanded significantly in 2020. This study enhances our comprehension of the spatiotemporal variations in carbon and pollutant emissions resulting from regional road network expansion, offering valuable insights and case studies for regions worldwide undergoing similar infrastructure development.

Fundamental influence of irreversible stress–strain properties in solids on the validity of the ramp loading method

The widely used quasi-isentropic ramp loading technique relies heavily on back-calculation methods that convert the measured free-surface velocity profiles to the stress–density states inside the compressed sample. Existing back-calculation methods are based on one-dimensional isentropic hydrodynamic equations, which assume a well-defined functional relationship P(ρ) between the longitudinal stress and density throughout the entire flow field. However, this kind of idealized stress–density relation does not hold in general, because of the complexities introduced by structural phase transitions and/or elastic–plastic response. How and to what extent these standard back-calculation methods may be affected by such inherent complexities is still an unsettled question. Here, we present a close examination using large-scale molecular dynamics (MD) simulations that include the detailed physics of the irreversibly compressed solid samples. We back-calculate the stress–density relation from the MD-simulated rear surface velocity profiles and compare it directly against the stress–density trajectories measured from the MD simulation itself. Deviations exist in the cases studied here, and these turn out to be related to the irreversibility between compression and release. Rarefaction and compression waves are observed to propagate with different sound velocities in some parts of the flow field, violating the basic assumption of isentropic hydrodynamic models and thus leading to systematic back-calculation errors. In particular, the step-like feature of the P(ρ) curve corresponding to phase transition may be completely missed owing to these errors. This kind of mismatch between inherent properties of matter and the basic assumptions of isentropic hydrodynamics has a fundamental influence on how the ramp loading method can be applied.

Transvesical open prostatectomy versus transurethral resection of the prostate for the treatment of benign prostatic hyperplasia, Iraq: A retrospective study

Background and Objective: Surgical treatment is an effective option for symptomatic benign prostatic hyperplasia (BPH), after failed conservative therapy. Transurethral resection of the prostate (TURP) is considered as a standard treatment method for the management of the small to medium prostate while transvesical open prostatectomy (OP) is a standard option for great prostate. The objective of this study is to evaluate the efficacy and safety of both (B-TURP) and (OP). Methods: The present study included 73 patients underwent either transvesical open prostatectomy (31 patients) or bipolar transurethral resection of the prostate (42 patients) between May 2019 to May 2021, in Erbil-city. The baseline characteristics, intraoperative and postoperative characteristics plus early and late adverse effects were obtained from medical records for all patients in both groups, retrospectively. The data analyzed and compared statistically. Results: The baseline characteristics in the studied groups showed no significant differences except for the prostate size which was more on the OP group. According to the results, operative time was significantly (P &lt;0.001) lower in the OP group. The means of the following variables in the OP group were significantly higher than those of the B-TURP group: Hospitalization days (P &lt;0.001), days of catheter removal, back to normal activity (P &lt;0.001), QoL score (P = 0.027), Qmax (P &lt; 0.001), and PVR (P = 0.046), while no significant difference was detected regarding IPSS (P = 0.404). Conclusion: B-TURP was superior to OP regarding the hospitalization days, recovery time back to normal day-activity, and quality of life. Otherwise, both mentioned approaches work well for the treating symptomatic BPH.

Physical modeling of conjugate heat transfer for multiregion and multiphase systems with the Volume-of-Fluid method

AbstractThe Volume-of-Fluid (VOF) method is commonly used for numerical simulations of phase change phenomena, such as nucleate boiling or droplet evaporation. A key issue with the standard VOF method is the averaging of the liquid and vapor properties in interface cells, which causes non-physical conjugate heat transfer with a solid wall. Therefore, we aim at a physical model for conjugate heat transfer between a solid and a multiphase fluid. The first measure for higher quality simulations is the splitting of the single temperature field in the fluid region into separate liquid and vapor temperature fields. The second measure is the development of a new, more physical temperature boundary condition for conjugate heat transfer between a solid region and a multiphase fluid, based on experimental results, theoretical models and theoretical considerations. In interface cells, the vapor phase is excluded from the conjugate heat transfer because only heat transfer to the liquid phase occurs resp. dominates. Additionally, the conjugate heat transfer between solid and liquid in the interface cells is performed with virtual subcells, depending on the respective volume fraction of the liquid phase. This new approach (we name it distinctive approach) is successfully validated for energy conservation, and stability issues are discussed for the first time. Significant differences to simulations with averaged properties are observed due to the (now) physically correct modeling of conjugate heat transfer. In our boiling cases, the more accurate numerical simulations lead to considerably larger bubble growth rates. Higher quality simulations are also expected for nearly all applications, where there is a three-phase contact line, be it vapor bubbles in nucleate boiling or droplets impacting on a heated surface.

Platelet-Rich Plasma (PRP) Based on Simple and Efficient Integrated Preparation Precises Quantitatively for Skin Wound Repair

Platelet-rich plasma (PRP) has become an important regenerative therapy. However, the preparation method of PRP has not been standardized, and the optimal platelet concentration for PRP used in skin wound repair is unclear, leading to inconsistent clinical efficacy of PRP. Therefore, the development of standardized preparation methods for PRP and the investigation of the dose-response relationship between PRP with different platelet concentrations and tissue regeneration plays an important role in the development and clinical application of PRP technology. This study has developed an integrated blood collection device from blood drawing to centrifugation. Response surface methodology was employed to optimize the preparation conditions, ultimately achieving a platelet recovery rate as high as 95.74% for PRP (with optimal parameters: centrifugation force 1730× g, centrifugation time 10 min, and serum separation gel dosage 1.4 g). Both in vitro and in vivo experimental results indicate that PRP with a (2×) enrichment ratio is the most effective in promoting fibroblast proliferation and skin wound healing, with a cell proliferation rate of over 150% and a wound healing rate of 78% on day 7.

Maximizing strength and durability in wood concrete (arbolite) via innovative additive control and consumption

AbstractA new approach for assessing the effectiveness and determining the consumption of additives to regulate the structural and mechanical characteristics of wood concrete is proposed, which allows rapid assessment in a short time and reduces the consumption of materials. The period is reduced from 28 to 1 day, and the sample sizes are reduced from 150 × 150 × 150 to 20 × 20 × 20 mm compared to those of the standard method. The results obtained are comparable using both methods within an error of up to 7%. The thermal conductivity of wood concrete with the addition of potassium sulfate was 20.8% less than that with the addition of calcium chloride. This reduction will reduce wall thickness, material consumption, and cost by 20.8%. In this regard, potassium sulfate, which does not form crystalline hydrates and makes it possible to obtain a material with lower thermal conductivity than other additives, all other things being equal, has a new advantage for wood concrete. In addition, potassium sulfate reduces the risk of corrosion of cement stone because one of the main causes of corrosion is crystalline hydrates. Reducing the risk of corrosion will increase the durability of the material.

Bleached Hair as Standard Template to Insight the Performance of Commercial Hair Repair Products

The increasing demand for effective hair care products has highlighted the necessity for rigorous claims substantiation methods, particularly for products that target specific hair types. This is essential because the effectiveness of a product can vary significantly based on the hair’s condition and characteristics. A well-defined bleaching protocol is crucial for creating a standardized method to assess product efficacy, especially for products designed to repair damaged hair. The objective of this study was to create a practical bleaching protocol that mimics real-world consumer experiences, ensuring that hair samples exhibit sufficient damage for testing. This approach allows for a reliable assessment of how well various products can repair hair. The protocol serves as a framework for evaluating hair properties and the specific effects of each product on hair structure. Color, brightness, lightness, morphology, and topography were primarily used to understand the big differences in the hair fiber when treated with two repair benchmark products, K18® and Olaplex®, in relation to the Bleached hair. The devised bleaching protocol proved to be a fitting framework for assessing the properties of hair and the unique characteristics of each tested product within the hair fiber. This protocol offers valuable insights and tools for substantiating consumer claims, with morphological and mechanical methods serving as indispensable tools for recognizing and validating claims related to hair. The addition of K18® and Olaplex® demonstrated an increase in hair brightness (Y) and lightness (L* and a*) in relation to the Bleached samples, which were considered relevant characteristics for consumers. Olaplex®’s water-based nature creates a visible inner sheet, effectively filling empty spaces and improving the disulfide linkage network. This enhancement was corroborated by the increased number of disulfide bonds and evident changes in the FTIR profile. In contrast, K18®, owing to the lipophilic nature of its constituents, resulted in the formation of an external layer above the fiber. The composition of each of the products had a discrete impact on the fiber distribution, which was an outcome relevant to the determination of spreadability by consumers.

An optimally convergent Fictitious Domain method for interface problems

We introduce a novel Fictitious Domain (FD) unfitted method for interface problems associated with a second-order elliptic linear differential operator, that achieves optimal convergence without the need for adaptive mesh refinements nor enrichments of the Finite Element spaces. The key aspect of the proposed method is that it extends the solution into the fictitious domain in a way that ensures high global regularity. Continuity of the solution across the interface is enforced through a boundary Lagrange multiplier. The subdomains coupling, however, is not achieved by means of the duality pairing with the Lagrange multiplier, but through an L2 product with the H1 Riesz representative of the latter, thus avoiding gradient jumps across the interface. Thanks to the enhanced regularity, the proposed method attains an increase, with respect to standard FD methods, of up to one order of convergence in energy norm. The Finite Element formulation of the method is presented, followed by its analysis. Numerical tests on a model problem demonstrate its effectiveness and its superior accuracy compared to standard unfitted methods.

Variational consistent one-point integration with Taylor's expansion-based stabilization in the second-order meshfree Galerkin method for strain gradient elasticity

A generalized variational principle with five independent variables is proposed for strain gradient elasticity, including displacement, strain, strain gradient, stress, and double stress. Based on the principle, a one-point integration scheme is designed for the second order meshfree Galerkin method through nodal smoothed derivatives and their high order derivatives by Taylor's expansion. Since the proposed integration scheme meets the orthogonality conditions, it is variational consistent. The weak form expanded with Taylor's polynomials can be well evaluated by nodal smoothed derivatives and their high order derivatives on one quadrature point. Numerical one- and two-dimensional case studies show that the proposed integration scheme performs better than the standard Gaussian integration method in terms of accuracy, convergence, efficiency, and stability.