Time Stability Research Articles

Optimal management in island microgrids using D-FACTS devices with large-scale two-population algorithm

Amidst the increasing complexity of microgrid optimization, characterized by numerous decision variables and intricate non-linear relationships, there is a pressing need for highly efficient algorithms. This study introduces a tailored Mixed Integer Nonlinear Programming (MINLP) model that optimizes the charging and discharging schedules of electric vehicles (EVs) and energy storage systems (ESS) while incorporating Distributed Flexible AC Transmission System (D-FACTS) devices. To address these challenges, a novel approach based on the Large-Scale Two-Population Algorithm (LSTPA) is proposed. The model's effectiveness was evaluated using a 33-node microgrid, where the proposed method achieved a total purchased energy of 1.2 MWh, a voltage deviation of 0.0357 p.u, and a CPU time of 551 s, outperforming traditional methods like NSGA-II, PSO, and JAYA. Additionally, in a 69-node microgrid, the approach resulted in a total purchased energy of 0.3 MWh and a voltage deviation of 0.0078 p.u. These results demonstrate the superior performance of the proposed method in terms of energy efficiency, voltage stability, and computational time, advancing the efficiency of microgrid management.

Turkish validity and reliability of the universal mental health literacy scale for adolescents (10-14 years): A methodological study.

Mental health literacy enables adolescents to acquire information that will accompany them in their future lives and to define their attitudes and behaviors. This study evaluated the Turkish validity and reliability of the Universal Mental Health Literacy Scale for Adolescents (10-14 years). This is a methodological, correlational, cross-sectional, and descriptive study. The study was conducted with 223 adolescents. Data were collected by 'Information Form' and 'Universal Mental Health Literacy Scale for Adolescents.' Exploratory Factor Analysis, Confirmatory Factor Analysis, and Pearson Correlation analysis were used to assess the validity and reliability of the UMHL-A. Item Content Validity Index (I-CVI) scores ranged from 0.94 to 0.96, while the Scale Content Validity Index (S-CVI) was 0.95. For 'Help-seeking and Stigma dimensions' χ2/df = 3.347, NFI = 0.804, IFI = 0.854, TLI = 0.778, CFI = 0.849, RMSEA = 0.103. For 'Knowledge of Mental Health and Knowledge of Mental Illnesses dimensions' χ2/df = 1.959, NFI = 0.731, IFI = 0.847, TLI = 0.774, CFI = 0.837, RMSEA = 0.066. The internal consistency and time stability were affirmed by a Hotelling T-square value of 15.241 and an F-test result of 27.793. This study reveals that the Turkish validity and reliability of the Universal Mental Health Literacy Scale for Adolescents is a valid and reliable tool for assessing mental health literacy among adolescents. The UMHL-A scale is a valid tool to evaluate critical aspects of mental health literacy in adolescent populations and can be used in both research and clinical practice in mental health education and intervention. It is recommended that the Turkish version of the Universal Mental Health Literacy Scale should be used to determine resilience in adolescents.

Impact of Ferulated Arabinoxylans from Maize Bran on Farinograph and Pasting Properties of Wheat Flour Blends.

This research explores the extraction of ferulated arabinoxylans (FAXs) from maize bran and their incorporation into wheat flour to assess their impact on rheological and pasting properties. Flour blends were prepared with FAX concentrations of 0%, 2%, 4%, 6%, 8%, and 10%, and these blends were then evaluated using farinograph, mixograph, micro-extensibility, and viscosity analyses. The results indicated that farinograph water absorption increased significantly (p ≤ 0.05), ranging from 54.9% to 60.5%, as the FAX content rose, correlating with higher gel-forming potential. Notably, the 2% FAX treatment (FAX2) exhibited the longest dough development time at 24.7 min. Stability and mixing time index (MTI) values also varied significantly (p ≤ 0.05) among treatments, with FAX2 displaying a longer mixing time of 14.4 ± 3.3 min. A pasting analysis revealed a significant decrease in peak and hot paste viscosity (p < 0.05) with increasing FAX concentrations, suggesting an association between lower hot paste viscosity and reduced breakdown. Micro-extensibility measures further indicated that blends with 0% and 2% FAX had greater extensibility, while the 4% FAX blend showed higher resistance. Overall, this research aims to advance the understanding of how these components can enhance flour functionality and contribute to the development of healthier, higher-quality baked products.

Decreased proprioception is associated with inferior postural control during unplanned landing in individuals with chronic ankle instability

ABSTRACT Poor postural control during jump landing may increase ankle sprain incidences among people with chronic ankle instability (CAI). The effects of anticipation on it and its relationship with proprioception need further examination. Fifteen participants with CAI and 15 healthy controls were recruited to perform single-leg jump landings when knowing the landing side before (planned) or after (unplanned) take-off respectively, along with a step-down proprioception test differentiating four inclination platforms (inverted 12°, 14°, 16° and 18°). Ground reaction force data (peak force, loading rate and time of stabilisation) during landings and proprioception scores were collected and analysed. The CAI group exhibited a higher loading rate (59.6 ± 7.6 vs 49.4 ± 6.7 N/kg*seconds, p = 0.011) and longer medial-lateral time to stabilisation (4.82 ± 0.69 vs 4.11 ± 0.47 seconds, p = 0.023) compared to the control group during an unplanned landing. Furthermore, the above variables were negatively correlated with the step-down proprioception score only in the unplanned condition but not in the planned condition. CAI participants had inferior medial-lateral time-to-stabilisation and loading attenuation during unplanned jump landing than healthy controls, which were associated with decreased proprioception, highlighting the importance of addressing proprioception to improve balance control during unpredictable landing situations.

The influence of the homofermentative lactic acid bacteria and enzymes on the nutritional value, health safety, and aerobic deterioration of the different maize hybrid silages

The research aimed to determine the impact of identic inoculants of lactic acid bacteria (LAB) with enzymes (ENZ) on the silage quality of 5 different corn hybrids (Zea mays). Hybrids (Pioneer Hi-Bred DuPont) differed by FAO maturity group (from early H1, mid-early H2, medium H3, mid-late H4 to late H5). Inoculant LAB consisted of a mixture of homofermentative bacteria: Lactobacillus plantarum, Enterococcus faecium, Pediococcus acidilactici, Lactobacillus salivarius, and ENZ: cellulase, α- amylase, hemicellulase, xylanase. Ensiling was done at the laboratory conditions, where the green mass of corn hybrids has been inoculated with LAB and ENZ were added, before ensiling. The process of ensiling lasted 60 days. The addition of LAB inoculants with ENZ is frequently used to speed up the ensiling process, prevent the growth of harmful microorganisms, protect the aerobic stability of silage, and improve the silage quality of different crops. The phase of aerobic degradation of silage begins immediately after exposure to silage to air. This stage is inevitable during feeding with silage and takes place in all silages, regardless of quality. The same pattern of reaction on identic LAB and EFEs addition was not found in silages ensiled from different hybrids. Among the evaluated corn hybrids, the additive to H1 early maturity hybrid had significantly improved the silage quality, and prolonged the time of aerobic stability, mainly due to the significantly highest CP, lowest ADL, and highest LA content. The chemical composition, fermentation, and microbiology profiles of silage significantly influence CO2 production in a test of aerobic stability (AS), and this is a causal relationship of aerobic stability duration. The results of this trial showed that the lower butyric acid, total microorganisms number, count of yeasts and mold, pH, and higher LAB, lactic acid, and acetic acid levels (P&lt;0.05), are accompanied by the production of lower CO2 (P&lt;0.05). The current research and previous studies suggest that nutritional value, health safety, and aerobic deterioration of the different maize hybrid silages are under the influence of epiphytic microflora of ensiled plants, used LAB inoculum, and EFEs addition in the appropriate amount, and the type of hybrid ensiled as well.

Optical analysis of transesterification reaction assisted by ultrasound

Ultrasound can be used during the biodiesel production reaction, aiming to increase the efficiency of the reaction, as well as reduce the catalyst and alcohol content, facilitating the purification process and minimizing environmental impacts in the production of this biofuel. This work evaluated by optical means the influence of the use of ultrasound on the reaction dynamics of transesterification under different catalyst contents. Tests were conducted using a Langevin-type transducer (40 kHz x 20.5 W) to convert 270 mL of soybean oil per batch. Previous tests in the reactor used showed intense cavitation activity resulting in mass loss of up to 27.3% in erosion tests on aluminum foil. Optical transmittance and ester content evaluation analyzes of the samples showed that ultrasound was able to increase the conversion rate and reduce the optical stabilization time (up to 9.9%), suggesting a shorter reaction time, especially for lower ester contents. catalyst.

New delay‐dependent finite‐time stabilization of Takagi–Sugeno fuzzy approaches for delayed nonlinear systems

AbstractIn this paper, the finite‐time stability and stabilization of nonlinear systems with delays is studied, via a Takagi–Sugeno approach. By using a novel Lyapunov–Krasovskii functional and introducing some fuzzy free‐weighting matrices, sufficient conditions are derived, for bounded and differentiable time‐varying delays in terms of an upper bound of the delay derivatives. Then, we achieve closed‐loop stabilization in finite time through an efficient parallel distributed compensation design. The sufficient conditions are formulated as linear matrix inequalities to achieve the desired performance. Finally, the proposed methodology is applied to various case studies, highlighting its significance.

Vertical larynx actions and intergestural timing stability in Hausa ejectives and implosives.

The current project undertakes a kinematic examination of vertical larynx actions and intergestural timing stability within multi-gesture complex segments such as ejectives and implosives that may possess specific temporal goals critical to their articulatory realization. Using real-time MRI (rtMRI) speech production data from Hausa non-pulmonic and pulmonic consonants, this study illuminates speech timing between oral constriction and vertical larynx actions within segments and the role this intergestural timing plays in realizing phonological contrasts and processes in varying prosodic contexts. Results suggest that vertical larynx actions have greater magnitude in the production of ejectives compared to their pulmonic counterparts, but implosives and pulmonic consonants are differentiated not by vertical larynx magnitude but by the intergestural timing patterns between their oral and vertical larynx gestures. Moreover, intergestural timing stability/variability between oral and non-oral (vertical larynx) actions differ among ejectives, implosives, and pulmonic consonants, with ejectives having the most stable temporal lags, followed by implosives and pulmonic consonants, respectively. Lastly, the findings show how contrastive linguistic 'molecules'- here, segment-sized phonological complexes with multiple gestures- interact with phrasal context in speech in such a way that it variably shapes temporal organization between participating gestures as well as respecting stability in relative timing between such gestures comprising a segment.

Influence of on-site sampling conditions on the representativeness of the sample for the analysis of trace VOCs in raw renewable gases.

In the context of the energy transition and in order to fully manage the integration of renewable and/or low-carbon gases into the gas mix, these new renewable gases need to be characterized, including volatile organic compounds (VOCs) at trace levels that may have an impact on different stages of the gas chain event at low concentrations. This study focuses on sampling because it is the first step in any method for analyzing trace VOCs and its careful execution is essential to ensure reliable results even if the on-site conditions can be variable, such as the external temperature. The stabilization time, the effect of external temperature, and the impact of using an intermediate sample cylinder prior to transfer to tubes were hence studied in the laboratory using a standard gas mixture representative of renewable gases. The latter was also studied using a real sample. To perform this study, VOCs were sampled in Tenax® TA tubes and then analyzed by thermal desorption hyphenated to comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry. The results showed that 45min were required to stabilize the sampling system and that external temperature had little influence, limited to the heaviest compounds. Finally, the use of a cylinder to temporarily collect gas prior to transfer to tubes led to a loss of compounds, particularly when the cylinder was stored before the transfer.

Enhancing energy capacity of the car’s hood door under excitation frequency via functionally graded triply periodic minimal surface material: Application of machine learning and mathematical simulation

This study investigates the nonlinear dynamic response and vibration characteristics of a car’s hood door, focusing on its energy capacity under various excitation frequencies. The hood door is modeled using a functionally graded triply periodic minimal surface (FG-TPMS) material, which offers superior mechanical properties and lightweight design. The analysis is conducted using a higher-order shear deformation theory (HSDT), which accounts for shear deformations more accurately than classical theories. The incorporation of von Karman nonlinear terms captures the geometric nonlinearity due to large deformations, providing a realistic simulation of the hood door’s behavior under dynamic loads. To solve the complex equations of motion derived from the HSDT and von Karman terms, a fourth-order Runge–Kutta method is employed. This numerical method ensures accurate time integration and stability of the solution. The dynamic response is further analyzed to determine the energy absorption capacity of the hood door material, crucial for safety and durability in automotive applications. Validation of the numerical model is performed using previous published articles and a hybrid machine learning algorithm, which combines data-driven approaches with traditional physics-based models. This hybrid validation enhances the accuracy and reliability of the predicted responses, ensuring that the proposed model can be effectively used in the design and optimization of car components. The results demonstrate the potential of FG-TPMS materials in automotive applications, offering improved energy absorption and vibration control, which are essential for enhancing vehicle safety and performance.

Development of a Single Vial Mass Flow Rate Monitor to Assess Pharmaceutical Freeze Drying Heterogeneity.

During pharmaceutical lyophilization processes, inter-vial drying heterogeneity remains a significant obstacle. Due to differences in heat and mass transfer based on vial position within the freeze drier, edge vials freeze differently, are typically warmer and dry faster than center vials. This vial position-dependent heterogeneity within the freeze dryer leads to tradeoffs during process development. During primary drying, process developers must be careful to avoid shelf temperatures that would result in overheating of edge vials causing the product sublimation interface temperature to rise above the critical (collapse) temperature. However, at lower shelf temperatures, center vials require longer to complete primary drying, risking collapse or melt-back due to incomplete drying. Both situations may result in poor product quality affecting drug stability, activity, and reconstitution times. We present a new approach for monitoring vial location-specific water vapor mass flow based on Tunable Diode Laser Absorption Spectroscopy (TDLAS). The single vial monitor enables measurement of the gas flow velocity, water vapor temperature, and gas concentration from the sublimating ice, enabling the calculation of the mass flow rate which can be used in combination with a heat and mass transfer model to determine vial heat transfer coefficients and product resistance to drying. These parameters can in turn be used for robust and rapid process development and control.

Carbazole-Based Dual-Band Electrochromic Polymers: The Effect of Linkage Sites on Electrochromic Performance.

Dual-band electrochromic (EC) materials are expected to be utilized as building materials for energy saving, but their cycle stability is still an obstacle. Here, two D-A conjugated polymers, PDPPCz36 and PDPPCz27, based on diketopyrrolopyrrole and carbazole linked with different sites, are synthesized. Both of them exhibit dual-band EC behaviors with a dark blue color in the neutral state and high absorption in the near-infrared (NIR) region when oxidized. However, PDPPCz36 exhibits better cycle stability and a shorter response time than PDPPCz27. In the visible (VIS) region, the PDPPCz36 film exhibits an initial light modulation range (ΔT) of 43.0% and that of the PDPPCz27 film is 41.3%. After 100 cycles of redox, the ΔT of the PDPPCz36 film declines by 32%, while that of PDPPCz27 attenuates by more than 50%. A similar tendency is evident in the NIR region. Moreover, PDPPCz36 shows subsecond colored switch times both in the VIS (0.4 s) and NIR (0.7 s) regions, while those of PDPPCz27 are 2.1 and 1.6 s, respectively. Further research suggests that 3,6-linked carbazoles in PDPPCz36 simultaneously inhibit the side reaction and film aggregation, which leads to better redox stability and shorter response time in both EC tests and devices.

Recycled polypropylene/crystalline cellulose composites obtained using polypropylene functionalized with maleinized hyperbranched polyol polyester as compatibilizing and plasticizing agent

AbstractRecycled polypropylene (rPP)/crystalline cellulose (rPP/CC) composites are promising alternatives for reducing the detrimental environmental consequences of virgin PP. However, the incompatibility of the rPP/CC composites hinders their widespread application. In this study, PP functionalized with maleinized hyperbranched polyol polyester (PP‐g‐MHBP) was used as a compatibilizing and plasticizing agent for the rPP/CC composites. Furthermore, the effect of PP‐g‐MHBP content on the rheological, thermal, morphological, and mechanical properties of the rPP/CC composites was evaluated. The composites were prepared at a mixing speed of 50 rpm for 7 min and the PP‐g‐MHBP content was varied between 0 and 20 wt%. The torque stabilization time was less than 1 min. The activation energy of flow () decreased with increasing PP‐g‐MHBP content, with its values ranging from 0.78 × 102 to 1.42 × 102 kcal.mol−1. The flow index () followed the opposite trend with values ranging from 0.55 ± 0.0030 to 0.85 ± 0.0010. PP‐g‐MHBP enhanced the processability, thermal stability and conductivity. The crystallinity, interactions between rPP and CC, and tensile modulus of the rPP/CC composites were also enhanced. Furthermore, it reduced the agglomeration of CC particles.Highlights The torque stabilization was lowest for all composites. The composites displayed low activation energy of flow. Recycled polypropylene and crystalline cellulose exhibited good interaction. The plasticizing effect was higher than that of compatibilization. The thermal stability and mechanical properties of the composites improved.

Studying the Stability of Anthocyanin Pigments Isolated from Juices of Colored-Fleshed Potatoes

The aim of this study was to obtain extracts of anthocyanin pigments from red and purple-fleshed potato juices characterized by stable color. For this purpose, potato juices were pasteurized at different temperatures or fruit and vegetable concentrates were added to them. Color stability tests of the obtained pigments were carried out in model pH and temperature conditions and after adding to natural yogurt. Both the pasteurization process and the addition of fruit and vegetable concentrates to the potato juices positively affected their color and its stability in time. However, the pasteurization of the potato juices had a negative effect on the content of biologically active compounds, in contrast to the juices stabilized with the addition of fruit and vegetable concentrates. Anthocyanin pigments from red-fleshed potato juices were more stable than those isolated from the purple-fleshed potato juices. The results of model tests of the anthocyanin pigment concentrates from the colored-flesh potatoes and natural yoghurts with their addition confirmed the high stability of the tested concentrates.

DDPG‐based heliostats cluster control of solar tower power plant

AbstractThe control of heliostat is crucial for the development of solar tower power plant. Currently, most power plants use open‐loop control, which has low cost but low efficiency, closed‐loop control has high concentrating efficiency, but each heliostat requires sensors and has high cost, and Proportional‐Integral‐Derivative (PID) controller has good control effect, but the parameter adjustment is difficult and overshooting problem occurs. In this paper, we propose a DDPG‐based heliostat cluster control aimed at improving the heliostat control effect and reducing the control cost. A leader‐follower strategy is used to control the heliostat, where the whole heliostat field is divided into several groups, each group is assigned a leader heliostat, and the rest of the heliostats follow the leader heliostat to rotate. The leader acquires the control error by means of a photoelectric sensor or a camera device. The following heliographs rotate with the leader to obtain the control signal, so there is no need for sensors, which reduces the number of sensors and lowers the cost. To address the shortcomings of traditional PID, we propose a DDPG‐based PID control algorithm. The algorithm is trained to find out the optimal value at each moment, which ensures that the controller parameters are optimal at each moment. The results show that the tracking error is below 0.0001 rad for both cluster control and individual control. This ensures effective tracking performance while reducing the sensor cost. The controller based on the DDPG algorithm eliminates overshoots, reduces errors, and shortens the stabilization time by 0.5 seconds.

Urea modified Cu-doped LaFeO3 nano-particles for humidity sensing with contactless moisture detection for medical and agricultural application

Nowadays, the role of humidity is a major factor in numerous applications such as medical purposes and soil moisture detection. In this work, we synthesized pristine LaFeO3 (LFO1, LFO2) nanoparticles via hydrothermal method with and without urea. Furthermore, the synthesis of LFO doped with Cr, Cu and Mn was also done in the presence of urea using hydrothermal technique and studied for humidity sensing. The XRD confirms the crystalline size of the developed nanoparticles ranges in 19–25 nm. The sensing properties of pristine and doped LFO sensors for humidity sensing have been investigated in the 11 % – 90 % relative humidity (RH) range. As compared with others, the Cu-doped LFO sensor exhibits better response and recovery time of 5.4 s and 3.8 s respectively. Additionally, the nanoparticles of Cu-doped LFO show a highly porous nature having nano-perforated dumbbell structure as identified from the FESEM images. Moreover, to check the functionality of the developed sensor, the device is fabricated, resulting in the linear increase in output current with increase in relative humidity at a bias voltage of 1 V. With rapid response and recovery time, superior sensitivity and long-time stability, the developed Cu-doped LFO sensor can be used for medical detection of asthma, apnea and cough, as well as for non-contact skin monitoring that indicates its potential use to identify the moisturizing products for skin care. Finally, the efficacy of the fabricated sensor to monitor real-time humidity is also observed via IoT on a laptop/smartphone to display its potential to detect soil moisture for agriculture application.

EFETIVIDADE DO MINDFULNESS NA PERCEPÇÃO DO TEMPO EM PESSOAS SAUDÁVEIS: UMA REVISÃO SISTEMÁTICA

Mindfulness meditation has shown very promising results in modulating experiential awareness of the present moment. These results have sparked interest in research into this technique in the experience or awareness of the passage of time (time perception). However, there is a lack of studies that systematically examine its effects in healthy people. The objective of this systematic review is to summarize the studies that evaluated the effectiveness of mindfulness in the perception of time in healthy people. A search in the PubMed, Web of Science, Embase and LILACs databases was carried out from 2013 to 2024, using the following key words: meditation, mindfulness, time perception, Underestimation and overestimation of subjective time. 239 studies were found, of which 10 met the eligibility criteria. Limitations of this study encompass a number of aspects including the paucity of data available for certain categories of outcomes, suggesting a significant gap in existing research. Regarding temporal perception, no homogeneity of results was found that expresses the relationship between mindfulness and overestimation, underestimation or stabilization of time.

Regulation of Br on molecular aggregation, film morphology and electrochromic performance of polythiophene derivatives

In this work, five polythiophene derivatives were synthesized through electrochemical copolymerization of 3,3-bis(bromomethyl)-3,4-dihydro-2H-thieno[3,4-b] (Deng et al., 2023; Li et al., 2020) [1,4]dioxepine (ProDOT-Br) and 3,3-dimethyl-3,4-dihydro-2H-thieno[3,4-b] (Deng et al., 2023; Li et al., 2020) [1,4]dioxepine (ProDOT-Me) at different mass ratios. DFT results prove that the layer spacing of conjugated blocks was increased from 5.94 Å for PProDOT-Me to 8.89 Å for PProDOT-Br due to the introduction of Br atom into side chain. And, the diverse film morphologies, such as fibre shape, cellular shape, flat shape, etc, were obtained by changing Br content in polymer. Additionally, through optimizing Br content, PBM(1,2) achieved enhanced electrochromic properties relative to two reference polymers [PProDOT-Br and PProDOT-Me], such as high optical contrast (ΔT = 76 %), fast response time (0.5 s), high transparency, and good stability. Finally, the flexible electrochromic device (8 cm × 4 cm) based on PBM(1,2) was constructed, which achieves rapid color change from purple to transparent blue. The results indicate that introducing various contents of Br atom into side chain is an effective strategy for regulating molecular microstructure and optimizing electrochromic properties of conjugated polymers.

A Novel First-Order Kinetic Model for Simultaneous Anaerobic–Aerobic Degradation of Municipal Solid Waste in Landfills

A first-order kinetic model for the simultaneous anaerobic–aerobic degradation of municipal solid waste (MSW) is presented in the study. The model incorporates the effect of oxygen concentration on anaerobic degradation, enabling the coexistence of anaerobic and aerobic processes within specific oxygen ranges. The model can thoroughly consider the impacts of temperature, moisture content, oxygen concentration, and free air space (FAS) on the degradation rates of five substrates, i.e., holocellulose, non-cellulosic sugars, proteins, lipids, and lignin. The model was successfully verified against two experimental results. The sequential model underestimates both compression strain and degradation ratio, with peak underestimation ratios of 8.7% and 9.2%, respectively. Using the simultaneous model, the effects of anaerobic age, temperature, and aeration rate on landfill aerobic remediation efficacy are quantitatively assessed. Two evaluation criteria, namely the advance rate of aerobic remediation stabilization time (Rt) and the degradation rate after 100 days of aerobic remediation (λ100a), are adopted. The results indicate the following: (1) Rt is more sensitive to anaerobic age and temperature, while λ100a is more affected by anaerobic age and aeration rate; (2) under optimal conditions, Rt and λ100a can reach 86.3% and 70.9%, respectively. The present model provides a crucial theoretical framework for evaluating aerobic remediation effectiveness in both anaerobic sanitary landfills and informal landfills, offering valuable insights for practical implementation and management.

Finite Time Stability Analysis and Feedback Control for Takagi–Sugeno Fuzzy Time Delay Fractional-Order Systems

This study treats the problem of Finite Time Stability Analysis (FTSA) and Finite Time Feedback Control (FTFC), using a Linear Matrix Inequalities Approach (LMIA). It specifically focuses on Takagi–Sugeno fuzzy Time Delay Fractional-Order Systems (TDFOS) that include nonlinear perturbations and interval Time Varying Delays (ITVDs). We consider the case of the Caputo Tempered Fractional Derivative (CTFD), which generalizes the Caputo Fractional Derivative (CFD). Two main results are presented: a two-step procedure is provided, followed by a more relaxed single-step procedure. Two examples are presented to show the reduction in conservatism achieved by the proposed methods. The first is a numerical example, while the second involves the FTFC of an inverted pendulum, which exhibits both symmetrical dynamics for small angular displacements and asymmetrical dynamics for larger deviations.