Hydrogen embrittlement (HE) has arisen as a critical issue for the development of high strength steel. The austenite and Cu-rich precipitates can provide stable trapping sites for diffusible hydrogen, and thus improved the resistance to HE. But the research on the synergistic effect of Cu and austenite on HE in low carbon low alloy steel has not been actively reported. In this study, four steels with varying Cu addition (0-3 wt%) were fabricated, and their resistance to HE was evaluated. The role of Cu addition was investigated by the ductile-brittle transition temperature (DBTT) value obtained from Charpy impact test and the loss of elongation measured from slow-strain-rate tensile (SSRT) test after hydrogen charging. Also, the hydrogen diffusivity and concentration were evaluated by electrochemical hydrogen permeation test. Cu addition resulted in a first decrease and subsequent increase of effective diffusion coefficient (D eff ), elongation loss and DBTT, and the minimum value was achieved in steel with 1.5 wt% Cu addition, indicating a higher resistance to HE. The unraveled mechanism was that Cu addition increased the content of retained austenite, which impeded the diffusion of hydrogen during deformation. But the stability of retained austenite decreased when the content of retained austenite reached a high value, which led to martensitic transformation and accordingly increased HE susceptibility. Moreover, Cu addition promoted the formation of Cu-rich precipitates in which Cu cluster/bcc Cu-rich precipitate coherent/semi-coherent with matrix can be strong trapping sites for hydrogen, and fcc Cu-rich precipitate acted as weak trapping sites for hydrogen. In addition, a higher density of dislocations was found in the steel with 1.5 wt% Cu addition, which may contribute to lower D eff and higher density of hydrogen traps (N T ). The present work suggested that Cu addition can enhance the resistance to HE during tensile and impact processes for the design of high strength steel. • Cu addition resulted in a first decrease and subsequent increase in the effective diffusion coefficient (D eff ) of hydrogen. • Cu addition increased the elongation rate and decreased the ductile-brittle transition temperature (DBTT) of the steels after hydrogen embrittlement. • The resistance to hydrogen embrittlement during tensile and impact process was determined by retained austenite, Cu-rich precipitates and dislocations in the microstructure. • The resistance to hydrogen embrittlement varied with the content and stability of austenite and the structure of Cu-rich precipitates.