ssDNA Chain Research Articles

Utilization of DNA and 2D metal oxide interaction for an optical biosensor.

The efficient monitoring and early detection of viruses may provide essential information about diseases. In this work, we have highlighted the interaction between DNA and a two-dimensional (2D) metal oxide for developing biosensors for further detection of viral infections. Spectroscopic measurements have been used to probe the efficient interactions between single-stranded DNA (ssDNA) and the 2D metal oxide and make them ideal candidates for detecting viral infections. We have also used fully atomistic molecular dynamics (MD) simulation to give a microscopic understanding of the experimentally observed ssDNA-metal oxide interaction. The adsorption of ssDNA on the inorganic surface was found to be driven by favourable enthalpy change, and 5'-guanine was identified as the interacting nucleotide base. Additionally, the in silico assessment of the conformational changes of the ssDNA chain during the adsorption process was also performed in a quantitative manner. Finally, we comment on the practical implications of these developments for sensing that could help design advanced systems for preventing virus-related pandemics.

First principle approach towards logic design using hydrogen-doped single-strand DNA.

Molecular logic gate has been proposed using single-strand DNA (ssDNA) consisting of basic four nucleobases. In this study, density functional theory and non-equilibrium Green's function based first principle approach is applied to investigate the electronic transmission characteristics of ssDNA chain. The heavily hydrogen-doped-ssDNA (H-ssDNA) chain is connected with gold electrode to achieve enhanced quantum-ballistic transmission along 〈1 1 1〉 direction. Logic gates OR, Ex-OR, NXOR have been implemented using this analytical model of H-ssDNA device. Enhanced logic properties have been observed for ssDNA after H adsorption due to improved electronic transmission. Dense electron cloud is considered as logic 'high' (1) output in presence of hydrogen molecule and on the contrary sparse cloud indicate logic 'low' (0) in the absence of hydrogen molecule. Device current is significantly increased from 0.2 nA to 2.4 µA (approx.) when ssDNA chain is heavily doped with hydrogen molecule. The current-voltage characteristics confirm the formation of various Boolean logic gate operations.

Computer Simulation of DNA Condensation by PAMAM Dendrimer

AbstractIn this study, dissipative particle dynamics is employed to investigate the complexation of poly(amido amine) dendrimer and single‐stranded DNA (ssDNA). A coarse‐grained model for ssDNA is constructed, which reproduces correctly the conformational behavior of the ssDNA molecules. The effects of pH, dendrimer generation, ionic strength, and dendrimer/ssDNA charge ratio on DNA–dendrimer complexes are explored. Simulation results show that ssDNA molecules can be significantly condensed by dendrimers and stable complexes are obtained by regulating the pH value. The ssDNA chain penetration would complicate its release from dendrimer, while this can be tuned by different generations of dendrimer. Salt concentration affects the size and stability of the complexes through ion screening effect. Dendrimer/ssDNA charge ratio can be used to control the size and morphology of the complex. This work can help design dendrimer‐based gene vectors.

In situ formed copper nanoparticles templated by TdT-mediated DNA for enhanced SPR sensor-based DNA assay

For the efficient surface plasmon resonance (SPR)-based DNA assay researching, signal amplification tactics were absolutely necessary. In this work, a sensitive SPR-DNA sensor was developed by employing in situ synthesis of copper nanoparticles (CuNPs) templated by poly-T sequences DNA from terminal deoxynucleotidyl transferase (TdT)-mediated extension, and synergistically with nano-effect deposition as the mass relay. The objective of this strategy was manifold: firstly, tDNA hybridized with the optimal designed probes to active the TdT-mediated DNA extension onto the surface of SPR chip, resulted a long poly-T sequences ssDNA chain in dsDNA terminal onto surface of gold chip and characterized by SPR signal amplitudes. Secondly, copper ion (Cu2+) adsorbed into the skeleton of poly-T sequences DNA, with the aid of ascorbic acid (VC) to achieve the Cu2+ reduction, copper nanostructures (CuNPs) was synchronously generated onto the single nucleotide chain anchoring in dsDNA derivatives and the formation was featured by transmission electron micrographs (TEM) and electrochemistry. Lastly, dsDNA-complexed CuNPs (CuNPs@dsDNA) triggered the final signal amplification via real-time conversion of the additive catechol violet (CV) into oligomer or chelation precipitation by CuNPs-tagged reporters. With the proposed setups, a precise and replicable DNA sensing platform for specific target oligo was obtained with a detection limit down to 3.21 femtomolar, demonstrating a beneficial overlapping exploitation of nanomaterials and biochemical reaction as unique SPR infrastructure. Such triple-amplification strategic setups, the possibility of various methods abutment and biocompatibility weight reactor was amassed and adapted to more biological detection field.

Multimodal plasmonic biosensing nanostructures prepared by DNA-directed immobilization of multifunctional DNA-gold nanoparticles

Biofunctional multimodal plasmonic nanostructures suitable for multiplexed localized surface plasmon resonance (LSPR) biosensing have been created by DNA-directed immobilization (DDI) of two distinct multifunctional biohybrid gold nanoparticles. Gold nanoparticles (AuNP) of distinct sizes, and therefore showing distinct plasmon resonant peaks (RP), have been biofunctionalized and codified with two different single stranded-DNA (ssDNA) chains. One of these oligonucleotide chains has been specifically designed to direct each AuNP to a distinct location of the surface of a DNA microarray chip through specific hybridization with complementary oligonucleotide strands. Scanning Electron Microscopy (SEM) has been used to demonstrate selective immobilization of each AuNP on distinct spots. The second ssDNA chain of the AuNPs provides the possibility to introduce by hybridization distinct types of bioactive molecules or bioreceptors, on a reversible manner. In this work, hapten-oligonucleotide bioconjugate probes, with sequences complementary to the second ssDNA linked to the AuNP, have been synthesized and used to create multiplexed hapten-biofuncionalized plasmonic nanostructures. The oligonucleotide probes consist on anabolic androgenic steroid haptens (AAS) covalently linked to specifically designed oligonucleotide sequences. The biofunctionality of these plasmonic nanostructures has been demonstrated by fluorescent microarray immunoassay and LSPR measurements, recording the shift of the RP produced after the antibody binding to the corresponding hapten-oligonucleotide probes immobilized on the nanostructured surface. Preliminary data show that this approach could allow manufacturing multifunctional multimodal LSPR chips for multiplexed analysis of different substances reaching very good detectability. Thus, small molecular weigh, analytes such as stanozolol (ST,) could be detected at concentrations in the low nM range. The results here presented open the door for an easy way to construct site-encoded multiplexed multimodal LSPR sensor transducers, combining the DDI strategies with multimodal biohybrid nanoparticles showing distinct optical properties.

Dynamics of single-stranded DNA tethered to a solid

Tethering is used to deliver specific biological and industrial functions. For example, single-stranded DNA (ssDNA) is tethered to polymerases and long sequences of double-stranded DNA (dsDNA) during replication, and to solids in DNA microarrays. However, tethering ssDNA to a large object limits not only the available ssDNA conformations, but also the range of time-scales over which the mechanical responses of ssDNA are important. In this work we examine the effect of tethering by measurement of the mechanical response of ssDNA that is tethered at each end to two separate atomic force microscope cantilevers in aqueous solution. Thermal motion of the cantilevers drives the ends of the ssDNA chain at frequencies near 2 kHz. The presence of a tethered molecule makes a large difference to the asymmetric cross-correlation of two cantilevers, which enables resolution of the mechanical properties in our experiments. By analysis of the correlated motion of the cantilevers we extract the friction and stiffness of the ssDNA. We find that the measured friction is much larger than the friction that is usually associated with the unencumbered motion of ssDNA. We also find that the measured relaxation time, ∼30 μs, is much greater than prior measurements of the free-molecule relaxation time. We attribute the difference to the loss of conformational possibilities as a result of constraining the ends of the ssDNA.

Sequence specific recognition of ssDNA by fluorophore 3-hydroxyflavone

A fully water soluble 3-hydroxyflavone (3HF) derivative, N-(3-hydroxy-4′-flavonyl)-N,N,N-trimethylammonium sulfate (3HFNMe3) was synthesized. Investigation of its emissions at varying wavelengths revealed that it had three emission bands of normal (N⁎), anionic (A⁎) and tautomeric (T⁎), in ultrapure water. Recognition of single-stranded ten ssDNA chains, having different nucleotide sequences was studied, using the ratiometric change of the intensities of the two bands (A⁎/T⁎), depending upon the varying environment of the 3HFNMe3 with different ssDNA chains. Addition of the ssDNA chains to the 3HFNMe3 solution caused gradual quenching of the A⁎ band and had almost no effect on the T⁎ band. As the ratios of the two bands (A⁎/T⁎) vs increasing amount of the ssDNAs generated characteristic curves for each ssDNA chain, it became possible to identify the chains with their characteristic curves.

Effects of Molecular Size and Surface Hydrophobicity on Oligonucleotide Interfacial Dynamics

Single-molecule total internal reflection fluorescence microscopy was used to observe the dynamic behavior of polycytosine single-stranded DNA (ssDNA) (1-50 nucleotides long) at the interface between aqueous solution and hydrophilic (oligoethylene glycol-modified fused silica, OEG) and hydrophobic (octadecyltriethoxysilane-modified fused silica, OTES) solid surfaces. High throughput molecular tracking was used to determine >75,000 molecular trajectories for each molecular length, which were then used to calculate surface residence time and squared displacement (i.e., "step-size") distributions. On hydrophilic OEG surfaces, the surface residence time increased systematically with ssDNA chain length, as expected due to increasing molecule-surface interactions. Interestingly, the residence time decreased with increasing ssDNA length on the hydrophobic OTES surface, particularly for longer chains. Similarly, the interfacial mobility of polynucleotides slowed with increasing chain length on OEG, but became faster on OTES. On OTES surfaces, the rates associated with desorption and surface diffusion exhibited the distinctive anomalous temperature dependence that is characteristic of hydrophobic interactions for short-chain species but not for longer chains. These combined observations suggest that long oligonucleotides adopt conformations minimizing hydrophobic interactions, e.g., by internal sequestration of hydrophobic nucleobases.

The Intra-S Phase Checkpoint Targets Dna2 to Prevent Stalled Replication Forks from Reversing

When replication forks stall at damaged bases or upon nucleotide depletion, the intra-S phase checkpoint ensures they are stabilized and can restart. In intra-S checkpoint-deficient budding yeast, stalling forks collapse, and ∼10% form pathogenic chicken foot structures, contributing to incomplete replication and cell death (Lopes et al., 2001; Sogo et al., 2002; Tercero and Diffley, 2001). Using fission yeast, we report that the Cds1(Chk2) effector kinase targets Dna2 on S220 to regulate, both in vivo and in vitro, Dna2 association with stalled replication forks in chromatin. We demonstrate that Dna2-S220 phosphorylation and the nuclease activity of Dna2 are required to prevent fork reversal. Consistent with this, Dna2 can efficiently cleave obligate precursors of fork regression-regressed leading or lagging strands-on model replication forks. We propose that Dna2 cleavage of regressed nascent strands prevents fork reversal and thus stabilizes stalled forks to maintain genome stability during replication stress.

Amplified On-Chip Fluorescence Detection of DNA Hybridization by Surface-Initiated Enzymatic Polymerization

We describe the incorporation of multiple fluorophores into a single stranded DNA (ssDNA) chain using terminal deoxynucleotidyl transferase (TdT), a template-independent DNA polymerase that catalyzes the sequential addition of deoxynucleotides (dNTPs) at the 3'-OH group of an oligonucleotide primer; we term this methodology surface initiated enzymatic polymerization (SIEP) of DNA. We found that long (>1 Kb) ssDNA homopolymer can be grown by SIEP, and that the length of the ssDNA product is determined by the monomer to oligonucleotide initiator ratio. We observed efficient initiation (≥50%) and narrow polydispersity of the extended product when fluorescently labeled nucleotides are incorporated. TdT's ability to incorporate fluorescent dNTPs into a ssDNA chain was characterized by examining the effect of the molar ratios of fluorescent dNTP to natural dNTP on the degree of fluorophore incorporation and the length of the polymerized DNA strand. These experiments allowed us to optimize the polymerization conditions to incorporate up to ~50 fluorescent Cy3-labeled dNTPs per kilobase into a ssDNA chain. With the goal of using TdT as an on-chip labeling method, we also quantified TdT mediated signal amplification on the surface by immobilizing ssDNA oligonucleotide initiators on a glass surface followed by SIEP of DNA. The incorporation of multiple fluorophores into the extended DNA chain by SIEP translated to a ~45 fold signal amplification compared to the incorporation of a single fluorophore. SIEP was then employed to detect hybridization of DNA, by the posthybridization, on-chip polymerization of fluorescently labeled ssDNA that was grown from the 3'-OH of target strands that hybridized to DNA probes that were printed on a surface. A dose-response curve for detection of DNA hybridization by SIEP was generated, with a ~1 pM limit of detection and a linear dynamic range of 2 logs.

Characterization of Gold Nanoparticles Modified with Single-Stranded DNA Using Analytical Ultracentrifugation and Dynamic Light Scattering

We report the characterization of gold nanoparticles modified with thiol-terminated single stranded DNA (ssDNA) using analytical ultracentrifugation. Dynamic light scattering was used to measure the diameter of bare and ssDNA modified gold nanoparticles to corroborate the predictions of our models. Sedimentation coefficients of nominally 10 and 20 nm diameter gold nanoparticles modified with thiol-terminated thymidine homo-oligonucleotides, 5-30 bases in length, were determined with analytical ultracentrifugation. The sedimentation coefficients of gold nanoparticles modified with ssDNA were found to decrease with increasing coverage of ssDNA and increasing length of ssDNA. The sedimentation coefficients of ssDNA modified gold particles were most closely predicted when the strands were modeled as fully extended chains (FEC). Apparent particle densities of bare gold nanoparticles calculated from measured sedimentation coefficients decreased significantly below that of bulk gold with decreasing size of nanoparticles. This finding suggests that hydration layer effects are an important factor in the sedimentation behavior for both bare and short ssDNA chain modified gold particles.

Nanomechanical behaviors of microcantilever-based single-stranded DNA chips induced by counterion osmotic effects

Experiments show that deflections of microcantilever-DNA chip can be induced by many factors, such as grafting density, hybridization efficiency, concentration, length and sequence of DNA molecules, buffer salt concentration, time, and temperature variation. However, there are few theoretical works on microcantilever-DNA chips. The present paper is aimed to study the influence of counterion effects of single-stranded DNA (ssDNA) polyelectrolyte solution on the nanomechanical behaviors of microcantilever-based ssDNA chips during packing process. First, the effect of osmotic pressure induced by ingress of counterions into DNA brush structures is studied with Hagan's model for a cylindrical polyelectrolyte brush system on the basis of Poisson-Boltzmann distribution hypothesis. Second, Zhang's two-variable method for a laminated cantilever is used to formulate a four-layer energy model for ssDNA chips with weak interactions. Third, the influence of grafting density, ssDNA chain length, and salt concentration on packing deflection is investigated using the principle of minimum energy. The predictive tendency is qualitatively similar to those observed in some related ssDNA chip experiments. The difference between the four-layer model and the simplified two-layer model for ssDNA chips is also discussed.

Have the primary structures of biomacromolecules been selected in a Darwinian fashion to adapt to the surrounding environments of our planet?

Have the primary structures of biomacromolecules been selected in a Darwinian fashion to adapt to the surrounding environments of our planet?

Weakly Bound Water Molecules Shorten Single-Stranded DNA

In this paper, we measure the single chain elasticity of an oligomer single-stranded DNA (ssDNA) in both aqueous and nonaqueous, apolar liquid environments by AFM-based single molecule force spectroscopy. We find a marked deviation between the force-extension relations recorded for the two conditions. This difference is attributed to the additional energy required to break the H-bond-directed water bridges around the ssDNA chain in aqueous solutions, which are nonexistent in organic solvents. The results obtained in 8 M guanidine-HCl solution provide more evidence that water bridges around ssDNA originate the observed deviation. On the basis of the results obtained by an ab initio quantum mechanics calculation, a parameter-free freely rotating chain model is proposed. We find that this model is in perfect agreement with the experimental force-extension curve obtained in organic solvents, which further corroborates our assumption. On the basis of the experimental results, it is suggested that the weak H-bonding between ssDNA and water molecules may be a precondition for stable double-stranded DNA to exist in water.

Dynamics of Electron Transport by Elastic Bending of Short DNA Duplexes. Experimental Study and Quantitative Modeling of the Cyclic Voltammetric Behavior of 3‘-Ferrocenyl DNA End-Grafted on Gold

The dynamics of electron transport within a molecular monolayer of 3'-ferrocenylated-(dT)(20) strands, 5'-thiol end-grafted onto gold electrode surfaces via a short C2-alkyl linker, is analyzed using cyclic voltammetry as the excitation/measurement technique. It is shown that the single-stranded DNA layer behaves as a diffusionless system, due to the high flexibility of the ss-DNA chain. Upon hybridization by the fully complementary (dA)(20) target, the DNA-modified gold electrode displays a highly unusual voltammetric behavior, the faradaic signal even ultimately switching off at a high enough potential scan rate. This remarkable extinction phenomenon is qualitatively and quantitatively justified by the model of elastic bending diffusion developed in the present work which describes the motion of the DNA-borne ferrocene moiety as resulting from the elastic bending of the duplex DNA toward and away from the electrode surface. Its use allows us to demonstrate that the dynamics of electron transport within the hybridized DNA layer is solely controlled by the intrinsic bending elasticity of ds-DNA. Fast scan rate cyclic voltammetry of end-grafted, redox-labeled DNA layers is shown to be an extremely efficient method to probe the bending dynamics of short-DNA fragments in the submillisecond time range. The persistence length of the end-anchored ds-DNA, a parameter quantifying the flexibility of the nanometer-long duplex, can then be straightforwardly and accurately determined from the voltammetry data.

Pulling hairpinned polynucleotide chains: Does base-pair stacking interaction matter?

Force-induced structural transitions both in relatively random and in designed single-stranded DNA (ssDNA) chains are studied theoretically. At high salt conditions, ssDNA forms compacted hairpin patterns stabilized by base pairing and base-pair stacking interactions, and a threshold external force is needed to pull the hairpinned structure into a random coiled one. The base-pair stacking interaction in the ssDNA chain makes this hairpin-coil conversion a discontinuous (first-order) phase transition process characterized by a force plateau in the force-extension curve, while lowering this potential below some critical level turns this transition into continuous (second-order) type, no matter how strong the base-pairing interaction is. The phase diagram (including hairpin-I, -II, and random coil) is discussed as a function of stacking potential and external force. These results are in quantitative agreement with recent experimental observations of different ssDNA sequences, and they reveal the necessity to consider the base-pair stacking interactions in order to understand the structural formation of RNA, a polymer designed by nature itself. The theoretical method used may be extended to study the long-range interaction along double-stranded DNA caused by the topological constraint of fixed linking number.