Split Ring Resonator Research Articles

Sensor and slow light based on plasmon-induced transparency in carbon nanotube rectangular split-ring resonator metamaterials

Sensor and slow light based on plasmon-induced transparency in carbon nanotube rectangular split-ring resonator metamaterials

Optically control tissue-independent reconfigurable antenna for body-centric communications at 2.4 GHz ISM band

The objective of this article is to design a tissue-independent reconfigurable antenna that operates at the Industrial, Scientific, and Medical band (ISM band: 2.4 − 2.485 GHz) for body-centric wireless communications. The primary radiator of the proposed antenna consists of three concentric split-ring resonators (SRRs) and a photodiode appropriately placed between the rings. In addition, a hook-shaped slot in the ground plane, and a shorting pin between the radiator and the ground plane are employed to improve the impedance matching and adjust the resonance frequency, respectively. The optically controlled implantable antenna (OCIA) with the novel configuration operates in the respective frequency band in the skin and muscle tissue in the OFF state and the fat tissue in the ON state of the diode. The numerical design and analysis of the OCIA were carried out using CST Microwave Studio and the obtained results were verified by the in-vivo, ex-vivo, and in-vitro measurements of the fabricated antenna. To the best of the authors' knowledge, this is the first optically reconfigurable antenna capable of covering the 2.4 GHz ISM band within three different body tissues.

Microwave humidity sensor based on shorted split ring resonator with interdigital capacitance and α-Al2O3 nanoflakes/chitosan sensitive film for respiration monitoring

A microwave relative humidity (RH) sensor based on shorted split ring resonator with interdigital capacitance (SSRR-IDC) as a test platform and α-Al2O3 nanoflakes/chitosan (CS) composite as sensitive film is proposed for the detection of human respiration. The SSRR-IDC was designed by optimizing the finger spacing and width of the IDC. Electromagnetic simulation of the designed SSRR-IDC confirms a strong electric field distribution and high dielectric sensitivity in the IDC region. The porous α-Al2O3 nanoflakes/CS composite was coated onto the IDC region of the SSRR to obtain a microwave humidity sensor. Abundant hydrophilic groups and large specific surface area of the α-Al2O3 nanoflakes/CS contribute to the adsorption of water molecules. The proposed microwave humidity sensor shows excellent sensitivity in wide RH range, especially at high humidity condition. The working principle and the sensitivity enhancement mechanism of the proposed microwave sensor were explained by combining a circuit model analysis and the dielectric property and surface microstructure changes of the sensitive materials. Furthermore, the microwave sensor also demonstrates short response/recover time and outstanding repeatability, long-term stability, temperature stability, and selectivity. Additionally, the prepared microwave humidity sensor successfully records respiratory data from different volunteers. Changes in respiratory depth before and after drinking water of the volunteers can also be distinguished by this sensor.

Design and analysis of ultra-wideband microstrip patch antenna with various conductive materials for terahertz gap

The paper explores the design and analysis of a wideband microstrip patch antenna with a metallic patch and a 3 × 3 split ring resonator (SRR) array operating in the 0.1–5 THz frequency range. The antenna's structure incorporates different conductive materials such as gold, silver, and graphene as a metallic patch. The dimensions of the metallic patch and SRR are calculated to achieve wideband operation within the desired THz range. The SRR array enhances electromagnetic resonance, thereby improving bandwidth and radiation characteristics for medical imaging. The study discusses the equivalent circuit and design equations for the microstrip patch antenna and SRR unit cell. For designing and analyzing the proposed antenna, CST Microwave Studio 2019 software have been used. Performance parameters such as return loss, bandwidth, gain, efficiency, directivity, VSWR, and radiation pattern have been evaluated. The advantages and limitations of each conductive material are evaluated to determine their suitability for THz-based medical imaging applications. The goal is to maximize the antenna's bandwidth, gain, and image resolution for medical imaging purposes. The findings highlight the performance characteristics of gold, silver, and graphene as conductive materials for medical imaging applications, facilitating the development of high-resolution, non-invasive imaging systems with improved diagnostic capabilities.

Active control of Fano resonance in side-coupled resonator-cavity systems

The study delves into actively controlling Fano resonance within a single-mode microstrip cavity, coupled with a split ring resonator (SRR) incorporating a varactor diode. This resonance arises from the interference between the SRR and a Fabry–Pérot cavity, resulting in a sharply asymmetric transmission spectrum. The varactor diode, situated within the SRR gap, is biased electrically via an external DC voltage source. Through manipulation of this bias voltage, both the transmission frequency and amplitude of the pronounced Fano resonance can be dynamically adjusted. Notably, a significant frequency shift of 345 MHz is achieved, accompanied by a transmission modulation depth of up to 34.2 dB. Moreover, at the Fano peak frequency of 2.65 GHz, the composite SRR-cavity structure exhibits a notable change in group delay, shifting by 21.3 ns with the bias voltage varying from 5 V to 2.6 V. These findings hold promise for the development of electrically controlled functional photonic devices, facilitating their adaptability and versatility in practical applications.

Eliminating sensing blind spots of field-enhanced Rydberg atomic antenna via an asymmetric parallel-plate resonator

Due to its large electric dipole moment, the Rydberg atom exhibits a strong response to weak electric fields, hence it is regarded as a highly promising atomic antenna. However, to enhance the reception sensitivity, split-ring resonators are needed normally, which will brings sensing blind spots. Thus it is not conducive to the application of full-coverage space communication. Here we propose that an atomic antenna with an asymmetric parallel-plate resonator, can not only enhance the received signal, but also eliminate sensing blind spots (pattern roundness can reach 7.8 dB while the split-ring resonator can be up to 39 dB). We analyze the influence of structural parameters on the field enhancement factor and directionality, and further discuss the limitation of the sensitivity by using thermal resistor noise theory. This work is expected to pave the way for the development of field-enhanced Rydberg atomic antennas that communicate without a blind spot.

Tuneable double negative (DNG) Tri-Hexagonal split ring resonator metamaterial for 5G application

This paper introduces a compact tuneable metamaterial (MTM) unit cell featuring a tri-hexagon and tri-square split ring resonator (THTSSSR) structure designed for 5G communication applications. Metamaterials are employed to achieve unique electromagnetic properties not found in natural materials. The design process involves the arrangement of three square rings and three hexagon rings as metallic patches on a Rogers substrate (RT 5880), measuring 7 x 7 mm2 with a thickness of 1.575 mm. The proposed design exhibits double negative (DNG) properties, with resonances in the transmission coefficient (S21) at 3.493 GHz and a bandwidth of −10 dB covering frequencies between 3.057 and 3.711 GHz. Numerical simulations conducted using finite-integration techniques (FIT) in CST Microwave Studio validate the design's effectiveness, with confirmation through the Advanced Design System (ADS). The MTM unit cell demonstrates tuneable attributes, including negative permittivity ranging from 3.39 to 5 GHz and negative permeability from 3.39 to 3.86 GHz. These findings highlight the compactness and tunability of the proposed design, making it promising for 5G communication applications.

Magnetostatic waves in metallic rectangular waveguides filled with uniaxial negative permeability media

The propagation characteristics of magneto-quasistatic waves, more commonly, known as magnetostatic waves in a long, metallic rectangular waveguide filled with a metamaterial slab are comprehensively investigated. The metamaterial slab consists of split-ring resonators as an anisotropic uniaxial medium with transversal negative effective permeability. Some analytical relations and numerical validations on the characteristics of these waves are presented. The results include the dispersion relations, mode patterns (field distributions) that can be supported by such media, and their corresponding cutoff frequencies, group velocities, power flows, and storage energies of magnetostatic waves. The findings from the present research study can be advantageous to advance the synthesis and development of negative permeability materials with peculiar features in guiding structures.

Terahertz binary computing in a coupled toroidal metasurface

The applications of terahertz metamaterials are being actively explored in recent times for applications in high-speed communication devices, miniature photonic circuits, and bio-chemical devices because of their wide advantages. The toroidal resonance, a new type of metasurface resonance, has been examined with great interest to utilize its properties in terahertz metasurface applications. This study reports a proof of concept design of a toroidal metasurface that experimentally demonstrates binary computing operations in the terahertz frequency regime. The analog computing of binary operations is achieved by the passive tuning of distance between the split ring resonators comprising the meta-molecule. The amplitude modulation is utilized as a method of determining the Boolean logic outputs of the system. The proposed metasurface could be further optimized for high amplitude modulations and active logic gate operations using tunable materials including graphene and ITO. The proposed metasurface consists of three split-ring resonators, and the near-field coupling between the adjacent resonators dictates the Boolean operations. A multipole analysis of the scattered powers of terahertz radiation determines the toroidal excitation in the metasurface. The proposed metasurfaces experimentally define AND Boolean logic operation at 0.89 terahertz, and OR Boolean logic operation at 0.97 terahertz. Numerical simulations support the experimentally obtained results. Additionally, we numerically report the excitation of NAND operation at 0.87 THz. Such toroidal analog computing metasurfaces could find applications in digitized terahertz circuits and integrated photonic devices.

Artificial Domain Patterning in Ultrathin Ferroelectric Films via Modifying the Surface Electrostatic Boundary Conditions.

Nanoscale spatially controlled modulation of the properties of ferroelectrics via artificial domain pattering is crucial to their emerging optoelectronics applications. New patterning strategies to achieve high precision and efficiency and to link the resultant domain structures with device functionalities are being sought. Here, we present an epitaxial heterostructure of SrRuO3/PbTiO3/SrRuO3, wherein the domain configuration is delicately determined by the charge screening conditions in the SrRuO3 layer and the substrate strains. Chemical etching of the top SrRuO3 layer leads to a transition from in-plane a domains to out-of-plane c domains, accompanied by a giant (>105) modification in the second harmonic generation response. The modulation effect, coupled with the plasmonic resonance effect from SrRuO3, enables a highly flexible design of nonlinear optical devices, as demonstrated by a simulated split-ring resonator metasurface. This domain patterning strategy may be extended to more thin-film ferroelectric systems with domain stabilities amenable to electrostatic boundary conditions.

Design and Development of a Split Ring Resonator and Circular Disc Metasurface Based Graphene/Gold Surface Plasmon Resonance Sensor for Illicit Drugs Detection

Design and Development of a Split Ring Resonator and Circular Disc Metasurface Based Graphene/Gold Surface Plasmon Resonance Sensor for Illicit Drugs Detection

The Strong Coupling Effect between Metallic Split-Ring Resonators and Molecular Vibrations in Polymethyl Methacrylate.

We propose and study a nanoscale strong coupling effect between metamaterials and polymer molecular vibrations using metallic split-ring resonators (SRRs). Specifically, we first provided a numerical investigation of the SRR design, which was followed by an experimental demonstration of strong coupling between mid-infrared magnetic dipole resonance supported by the SRRs fabricated on a calcium fluoride substrate and polymethyl methacrylate molecular vibrations at 1730 cm-1. Characterized by the anti-crossing feature and spectral splitting behaviors in the transmission spectra, these results demonstrate efficient nanoscale manipulation of light-matter interactions between phonon vibrations and metamaterials.

A miniaturized and low-loss Q-band SIW bandpass filter based on evanescent-mode in wafer-level packaging process

This paper presents a miniaturized Q-band substrate integrated waveguide (SIW) bandpass filter (BPF) on a silicon-based wafer-level packaging (WLP) process. By incorporating capacitive quasi-coplanar waveguide (CPW) feeding structures and complementary split-ring resonators (CSRRs), the SIW operates in an evanescent-mode below the lower cutoff frequency and then achieves miniaturization. The efficient conversion of wave-modes, mutual excitation among multiple capacitive structures, and extremely short transmission paths, collectively resulting in the proposed BPF exhibiting low insertion loss. Furthermore, the area of fabricated filter has been reduced by 88.96 % compared to the requirement of the cutoff frequency. The measured results show that the minimum insertion loss is 1.24 dB, the return loss is better than 15 dB, and the 3 dB passband covers from 29.6 to 47.8 GHz (FBW is 47 %). These results indicate that, the proposed filter effectively solve the issues of large areas in SIW filters and high losses in silicon-based integrated or packaging processes.

Boosting Second Harmonic Generation Efficiency and Nonlinear Susceptibility via Metasurfaces Featuring Split-Ring Resonators and Bowtie Nanoantennas.

This work investigates a metasurface design to achieve remarkable second harmonic generation (SHG) conversion efficiency and enhance effective nonlinear susceptibility using the finite element method. The elements of the designed structure are composed of a rectangular split-ring resonator Ag film, a bowtie-shaped Ag nanoantenna, and a pair of Bi bars that induce nonlinear optical phenomena due to the nonuniform distribution of the electric and magnetic fields within the device surface. The simulation results agree perfectly with the theory and demonstrate outstanding achievements in terms of SHG conversion efficiency (η) and effective nonlinear susceptibility (χeff(2)). Specifically, the metasurface reaches a peak η value of 4.544×10-8 and an effective nonlinear susceptibility of 3.4×104 pm/V. This work presents a novel and versatile design to achieve high η and χeff(2) in an SHG metasurface.

Split-ring resonator with interdigital Split electrodes as detector for liquid and ion chromatography

The analysis of food and drugs as well as the monitoring of chemical processes and bioreactors by high-performance liquid chromatography and ion chromatography requires universal, cost-effective, and sensitive detectors. Therefore, this work presents a split-ring resonator that detects changes in the electrical and dielectric properties of the eluate from liquid chromatography or ion chromatography by monitoring the amplitude of the transmitted signal using an envelope detector. The used split-ring resonator consists of a simple printed circuit board featuring two microstrip lines. One is formed to a ring with interdigital split electrodes. The interdigital split electrodes forming the sensitive area significantly enhance the sensitivity to changes in relative permittivity, dielectric losses and electrical conductivity of the eluate In addition, the split-ring resonator is a small, inexpensive and easy-to-use detector that uses several dielectric parameters simultaneously for the measurement. Furthermore, the split-ring resonator measures these parameters at a significantly lower frequency than optical detectors and therefore measures different changes in frequency-dependent permittivity. For demonstrating feasibility of a split-ring resonator as a detector for high-performance liquid chromatography and ion chromatography, various anion and cation standards, basic and acidic amino acids, sugars, as well as sugar alcohols were separated and detected. A conductivity detector for ion chromatography and a refractive index detector for high-performance liquid chromatography were used as reference detectors.

A Decoupling method using Split Ring Resonator (SRR) for Tri-band MIMO Antenna for WLAN LTE Band and 5G applications

MIMO antenna design has always been a topic of interest in wireless technology. Although it has many benefits, the key challenge is to minimize mutual coupling between antenna elements. This study presents a decoupling technique between two tri-band antennas for LTE, WLAN, and 5G applications. For 3.5GHz, a monopole is initially created; the other two resonant frequencies are produced by changing the partial ground plane. Then, a MIMO antenna system is created using two tri-band monopoles. The resonators of low band can minimize the mutual coupling for two higher bands by suppressing surface wave propagation. Finally, coupling is reduced in the low band by using a Split Ring Resonator (SRR) to cancel out the original coupling. The reported MIMO antenna spans the 2.4/5.8GHz WLAN and LTE bands, as well as the 3.5 GHz 5G bands, with a mutual coupling of less than -18 dB.

Differential metamaterial based sensor for solid dielectric characterization with improved sensitivity

PurposeThe purpose of this study is to introduce a new type of sensor which uses microwave metamaterials and direct-coupled split-ring resonators (DC-SRRs) to measure the dielectric properties of solid materials in real time. The sensor uses a transmission line with a bridge-type structure to measure the differential frequency, which can be used to calculate the dielectric constant of the material being tested. The study aims to establish an empirical relationship between the dielectric properties of the material and the frequency measurements obtained from the sensor.Design/methodology/approachIn the proposed design, the opposite arm of the bridge transmission line is loaded by DC-SRRs, and the distance between DC-SRRs is optimized to minimize the mutual coupling between them. The DC-SRRs are loaded with the material under test (MUT) to perform differential permittivity sensing. When identical MUT is placed on both resonators, a single transmission zero (notch) is obtained, but non-identical MUTs exhibit two split notches. For the design of differential sensors and comparators based on symmetry disruption, frequency splitting is highly useful.FindingsThe proposed structure is demonstrated using electromagnetic simulation, and a prototype of the proposed sensor is fabricated and experimentally validated to prove the differential sensing principle. Here, the sensor is analyzed for sensitivity by using different MUTs with relative permittivity ranges from 1.006 to 10 and with a fixed dimension of 9 mm × 10 mm ×1.2 mm. It shows a very good average frequency deviation per unit change in permittivity of the MUTs, which is around 743 MHz, and it also exhibits a very high average relative sensitivity and quality factor of around 11.5% and 323, respectively.Originality/valueThe proposed sensor can be used for differential characterization of permittivity and also as a comparator to test the purity of solid dielectric samples. This sensor most importantly strengthens robustness to environmental conditions that cause cross-sensitivity or miscalibration. The accuracy of the measurement is enhanced as compared to conventional single- and double-notch metamaterial-based sensors.

Split ring resonator geometry inspired crossed flower shaped fractal antenna for satellite and 5G communication applications

This work suggests a fractal antenna in the shape of a crossed flower with a split ring resonator geometry. This suggested antenna serves the Sub-6 GHz 5G and satellite repeater applications for wireless devices operating in the frequency range of 4.01–4.82 and 7.6–7.94 GHz, respectively. The suggested antenna's performance parameters have been empirically confirmed by creating a printed prototype. The antenna geometry is based on a lower-cost FR4 substrate and consists of a mix of crossed floral square-shaped split-ring resonators organized in a Minkowski fractal configuration. A thorough examination of both manufactured and simulated antennas is conducted to demonstrate the uniqueness and edge over traditional dual-band antennas. The suggested fractal antenna's overall physical dimensions measure 0.90λ x 0.96λ at a lower resonant frequency. The response of the unit cell antenna is recorded when Split Ring Resonators are grouped in a fractal antenna with a flower shape. The measured findings verify that the proposed and constructed antenna has an electrical impedance bandwidth of −10 dB at lower frequency band (18.80 %, 4.01–4.82 GHz) and upper frequency band (4.41 %, 7.6–7.94 GHz) of −10 dB. The simulated and fabricated prototypes exhibit good agreement with respect to the stable gain and radiation patterns. Because of its consistent radiation efficiency in the realized resonating bands, the suggested prototype is a strong contender for 5G Sub-6 GHz and X band satellite applications.

Octagonal complementary split ring resonator on rectangular patch MIMO antenna for terahertz applications

A novel micro-sized inset-fed rectangular MIMO patch (IRMP) antenna with an octagonal complementary split ring resonator and defected ground structure is proposed for wide-band terahertz (THz) applications. The spatial and pattern diversity configurations consist of two identical radiating elements positioned adjacent to and orthogonal to each other. For both configurations, it exhibits an impedance bandwidth of 1.3 THz (S11 < −10 dB) spanning from 3.2 THz to 4.5 THz. The IRMP antenna has an isolation of S12 < −20 dB for both configurations. The overall dimensions of the two configurations are 200 × 400 × 20 µm3. The gain of the spatial diversity configuration is 8.9 dBi, 9.7 dBi, and 10.4 dBi. Similarly, the gain of pattern diversity configuration is 6.07 dBi, 7.54 dBi, and 10.2 dBi at 3.52 THz, 3.90 THz, and 4.26 THz, respectively. The MIMO performance parameters of both configurations are envelope correlation coefficient < 0.001, diversity gain > 9.995, channel capacity loss < 0.005 bits/sec/Hz, and mean effective gain between −6 dB and −8 dB within the band, which is acceptable.

Compact triple decagon split ring resonator metamaterial for liquid sensing applications

Compact triple decagon split ring resonator metamaterial for liquid sensing applications