Spindle Structure Research Articles

Dynamic Characteristics Analysis and Improvement of TK6920 Spindle Box

TK6920 boring and milling machine is an advanced multi-functional.processing.equipment. Its range of processing is wide and production efficiency is high. It is available for drilling, reaming, threading , milling and cutting trenches plane ; coupled with rotary table , the machine can also bore in opposite direction and multi-faceted process [ 1 ]. Spindle box is one of the most important parts of milling and boring , which is mainly used to install the spindle structure and transmission parts . Spindle box requires not only sufficient stiffness and strength , but also a certain degree of vibration damping ability. Its precision and structural changes have a significant impact on the accuracy of machined parts , so the headstock structural analysis and optimization is necessary

Depletion of pericentrin in mouse oocytes disrupts microtubule organizing center function and meiotic spindle organization.

Accurate chromosome segregation is dependent on the formation and stability of the microtubule spindle apparatus. Meiotic spindle assembly in oocytes differs from the process used during mitosis, and is regulated by unique microtubule organizing centers (MTOCs) that lack centrioles. To gain insight into the molecular composition and function of acentriolar MTOCs in mouse oocytes, we assessed the role of a key MTOC-associated protein, pericentrin (PCNT). In somatic cells, pericentrin functions as a scaffold that binds specific proteins at MTOCs, including γ-tubulin, which is necessary for microtubule nucleation. Pericentrin is expressed in oocytes, but the conservation of its function is not known. Pericentrin localizes specifically to MTOCs during prophase-I arrest in mouse oocytes recovered from pre-ovulatory ovarian follicles, and remains associated with MTOCs at spindle poles during metaphase-I and -II. To test function, specific siRNAs were used to knock down Pcnt transcripts in mouse oocytes. Efficient protein depletion was confirmed by Western blot as well as immunofluorescence analysis. Notably, meiotic spindle structure and chromosome alignment were disrupted in Pcnt-depleted oocytes. Disorganized spindle structures with reduced microtubule density and misaligned chromosomes were observed in the majority of these oocytes (∼ 70%). In addition, γ-tubulin localization to MTOCs was significantly reduced and microtubule regrowth, following cold treatment, was delayed in Pcnt-depleted oocytes. Thus, pericentrin is a key functional component of the unique acentriolar MTOCs of mouse oocytes, and plays an important role in regulating meiotic spindle assembly and/or stability.

Dynamic Sensitivity Research for the Spindle of High-Speed Grinder Based on the Artificial Neural Network

Three-dimensional parametric entity model was established for the high speed grinder spindle using Pro/Pragram in this article, the sample data of the artificial neural network model was obtained with the modal analysis performed by MSC.Patran/Nastran finite element analysis software, and the dynamic analysis model of high-speed grinder was established based on BP artificial neural network, the the modal analysis experiment of high speed grinder spindle and the sensitivity analysis of first-order natural frequency for design parameters were finished. Research shows that the dynamic characteristic of hollow spindle structure is much better than solid structure, compared with finite element model, BP artificial neural network model can realize optimization design and calculation of complex structure more quickly.

Pericentromere tension is self-regulated by spindle structure in metaphase.

During cell division, a mitotic spindle is built by the cell and acts to align and stretch duplicated sister chromosomes before their ultimate segregation into daughter cells. Stretching of the pericentromeric chromatin during metaphase is thought to generate a tension-based signal that promotes proper chromosome segregation. However, it is not known whether the mitotic spindle actively maintains a set point tension magnitude for properly attached sister chromosomes to facilitate robust mechanochemical checkpoint signaling. By imaging and tracking the thermal movements of pericentromeric fluorescent markers in Saccharomyces cerevisiae, we measured pericentromere stiffness and then used the stiffness measurements to quantitatively evaluate the tension generated by pericentromere stretch during metaphase in wild-type cells and in mutants with disrupted chromosome structure. We found that pericentromere tension in yeast is substantial (4-6 pN) and is tightly self-regulated by the mitotic spindle: through adjustments in spindle structure, the cell maintains wild-type tension magnitudes even when pericentromere stiffness is disrupted.

Congenital microcephaly.

The underlying etiologies of genetic congenital microcephaly are complex and multifactorial. Recently, with the exponential growth in the identification and characterization of novel genetic causes of congenital microcephaly, there has been a consolidation and emergence of certain themes concerning underlying pathomechanisms. These include abnormal mitotic microtubule spindle structure, numerical and structural abnormalities of the centrosome, altered cilia function, impaired DNA repair, DNA Damage Response signaling and DNA replication, along with attenuated cell cycle checkpoint proficiency. Many of these processes are highly interconnected. Interestingly, a defect in a gene whose encoded protein has a canonical function in one of these processes can often have multiple impacts at the cellular level involving several of these pathways. Here, we overview the key pathomechanistic themes underlying profound congenital microcephaly, and emphasize their interconnected nature.

Turning-Milling Machining Center of Each Axis Movement Principle and the Headstock Structure Analysis

Turning milling machining center are analyzed the structure and working principle of headstock of numerical control machine tool headstock consists of motor, drive system and components of the head of a bed, is mainly used to achieve the main movement of the machine tool. Spindle structure adopts precision double row cylindrical roller bearing and two-way thrust angular contact ball bearing group and type. The machine is the best combination of lathe and milling machine. Configuration French NUM1060 system, realize five axis control, a loading card can complete a variety of difficult machining of complex.

Understanding the role of myosin‐10 at the mitotic spindle (801.3)

The proper formation and function of mitotic spindles are essential for any organism. Disruption of myosin‐10 (myo10), an actin‐based motor protein, has been shown to perturb mitotic spindle structure and function. Such an important role for a myosin at the mitotic spindle is surprising since spindles are microtubule‐based structures. It thus stands to reason that myo10 either directly or indirectly interacts with spindle microtubules. In support of a direct interaction, a microtubule‐binding domain (MTB) has been identified in the C‐terminal tail of Myo10, suggesting that myo10 can interact with both cytoskeletal polymers. Here we use a dominant negative approach to investigate the function of the MTB in myo10’s spindle function. In brief, mRNA encoding various fragments of the myo10 C‐terminal tail with either intact or altered MTB were injected into Xenopus laevis embryos, and the embryos were subsequently analyzed for protein expression and spindle phenotypes. Results indicate that protein fragments containing intact MTB function as dominant negatives and cause spindle phenotypes similar to myo10 depletion, while fragments that either excluded or contained a mutated MTB did not. This suggests that the MTB of myo10 plays a crucial role in myo10’s function at the mitotic spindle.

How does the ambiguity of the electronic stress tensor influence its ability to serve as bonding indicator

The electronic stress tensor is not uniquely defined. Possible bonding indicators originating from the quantum stress tensor may inherit this ambiguity. Based on a general formula of the stress tensor this ambiguity can be described by an external parameterλfor indicators derived from the scaled trace of the stress tensor (whereby the scaling function is proportional to the Thomas–Fermi kinetic energy density). The influence ofλis analyzed and the consequences for the representation of chemical bonding are discussed in detail. It is found that the scaled trace of the stress tensor may serve as suitable bonding indicator over a wide range ofλvalues, excluding the value range between −0.15 and −0.48. Focusing on the eigenvalues of the stress tensor, it is found that the sign of the eigenvalues heavily depends on the chosen representation of the stress tensor. Therefore, chemical bonding analyses which are based on the interpretation of the eigenvalue sign (e.g., the spindle structure) are strongly dependent on the chosen form of the stress tensor. © 2014 Wiley Periodicals, Inc.

ATM controls proper mitotic spindle structure

The recessive ataxia-telangiectasia (A-T) syndrome is characterized by cerebellar degeneration, immunodeficiency, cancer susceptibility, premature aging, and insulin-resistant diabetes and is caused by loss of function of the ATM kinase, a member of the phosphoinositide 3-kinase–like protein kinases (PIKKs) family. ATM plays a crucial role in the DNA damage response (DDR); however, the complexity of A-T features suggests that ATM may regulate other cellular functions. Here we show that ATM affects proper bipolar mitotic spindle structure independently of DNA damage. In addition, we find that in mitosis ATM forms a complex with the poly(ADP)ribose (PAR) polymerase Tankyrase (TNKS) 1, the spindle pole protein NuMA1, and breast cancer susceptibility protein BRCA1, another crucial DDR player. Our evidence indicates that the complex is required for efficient poly(ADP)ribosylation of NuMA1. We find further that a mutant NuMA1 version, non-phosphorylatable at potential ATM-dependent phosphorylation sites, is poorly PARylated and induces loss of spindle bipolarity. Our findings may help to explain crucial A-T features and provide further mechanistic rationale for TNKS inhibition in cancer therapy.

Katanin maintains meiotic metaphase chromosome alignment and spindle structure in vivo and has multiple effects on microtubules in vitro

Assembly of Caenorhabditis elegans female meiotic spindles requires both MEI-1 and MEI-2 subunits of the microtubule-severing ATPase katanin. Strong loss-of-function mutants assemble apolar intersecting microtubule arrays, whereas weaker mutants assemble bipolar meiotic spindles that are longer than wild type. To determine whether katanin is also required for spindle maintenance, we monitored metaphase I spindles after a fast-acting mei-1(ts) mutant was shifted to a nonpermissive temperature. Within 4 min of temperature shift, bivalents moved off the metaphase plate, and microtubule bundles within the spindle lengthened and developed a high degree of curvature. Spindles eventually lost bipolar structure. Immunofluorescence of embryos fixed at increasing temperature indicated that MEI-1 was lost from spindle microtubules before loss of ASPM-1, indicating that MEI-1 and ASPM-1 act independently at spindle poles. We quantified the microtubule-severing activity of purified MEI-1/MEI-2 complexes corresponding to six different point mutations and found a linear relationship between microtubule disassembly rate and meiotic spindle length. Previous work showed that katanin is required for severing at points where two microtubules intersect in vivo. We show that purified MEI-1/MEI-2 complexes preferentially sever at intersections between two microtubules and directly bundle microtubules in vitro. These activities could promote parallel/antiparallel microtubule organization in meiotic spindles.

Micromechanics of the Vertebrate Meiotic Spindle Examined by Stretching along the Pole-to-Pole Axis

The meiotic spindle is a bipolar molecular machine that is designed to segregate duplicated chromosomes toward the opposite poles of the cell. The size and shape of the spindle are considered to be maintained by a balance of forces produced by molecular motors and microtubule assembly dynamics. Several studies have probed how mechanical perturbations of the force balance affect the spindle structure. However, the spindle’s response to a stretching force acting at the spindle pole and along its long axis, i.e., the direction in which chromosomes are segregated, has not been examined. Here, we describe a method to apply a stretching force to the metaphase spindle assembled in Xenopus egg extracts and measure the relationship between the force and the three-dimensional deformation of the spindle. We found that the spindle behaves as a Zener-type viscoelastic body when forces are applied at the spindle pole, generating a restoring force for several minutes. In addition, both the volume of the spindle and the tubulin density are conserved under the stretching force. These results provide insight into how the spindle size is maintained at metaphase.

Probing Forces on Newly Generated Spindle Microtubule Minus-Ends

The mitotic spindle is a dynamic self-organizing machine that coordinates cell division and preserves genomic stability. The ability to focus microtubule minus-ends into poles is crucial to spindle structure and function. However, our understanding of pole-focusing forces has been limited by the challenges of labeling and imaging microtubule minus-ends in established spindles. Here, we used laser ablation to sever kinetochore-fiber microtubules in mammalian cells and probe how the cell detects and organizes newly generated microtubule minus-ends. Within a few seconds of ablation, the cell recognizes new minus-ends and begins pulling them poleward. These pole-focusing forces exist throughout metaphase and anaphase and can move chromosomes rapidly, dominating other spindle forces. Opposing forces on chromosomes from the other half-spindle are able to slow, though not stop, the pole-focusing response, as indicated by faster pole-focusing speeds in monopolar spindles and during anaphase than in metaphase bipolar spindles. Together, our data indicate that microtubule minus-end focusing forces operate broadly and rapidly and are of similar magnitude to other spindle forces. These pole-focusing forces are thus well-suited to robustly maintain spindle structural integrity despite rapid turnover of spindle components and mechanical challenges.

Relations between ultrastructure of mitotic spindle and chromosome translocation

Dividing endosperm cells of <em>Haemanthus katherinae</em> Bak. treated with an 0.25 per cent mixture of water-soluble glycosides from <em>Nerium oleander</em> were insepected in a light microscope (LM) and severe disturbances were found in all phases of mitosis. The same cells were observed in the electron microscope (EM) and relations were noted and analysed between the chromosome arrangement and the submicroscopic structure of the mitotuc spindle. The successive steps in the disintegration of the formed spindle are described: fragmentatiun of all microtubules (MTs) starting from the poles, disappearance of non-kinetachore MTs and further the external MTs of the kineto,chore bundle. The central (internal) parallel ones remain the longest at the kinerf,ochares. Oleander glycosides cause disintegration of the existing MTs and prevent formation of new ones. The causes of restitution transformations in the successive phases of mitosis are discussed.

10 kw Vertical Axis Wind Turbine Spindle Design and Optimization

The spindle of a 10 kw vertical axis wind turbine is designed in this paper, and the relevant geometric parameters is given, and build the geometry of the finite element model. Calculation of the spindle under wind load and dead weight , and analyse the spindle Von Mess stress, deformation nephogram, and give the former six order vibration mode of the spindle. Through the analysis, Then the design parameters of the spindle are optimized. and the optimized structure of spindle has been got. optimized spindle is in lower quality, more satisfy the requirement of wind turbine running under high load at the same time .

The Effects of Demecolcine, Alone or in Combination with Sucrose on Bovine Oocyte Protrusion Rate, MAPK1 Protein Level and C-Mos Gene Expression Level

Aims: Our study aims to clarify the effects of demecolcine, alone or in combination with sucrose on bovine oocyte protrusion rate, MAPK1 protein level and c-mos gene expression level. Methods: The effects of the demecolcine concentration, treatment duration, and synergistic effects with sucrose solution on the rate of membrane protrusions of bovine oocytes were investigated. Using real-time fluorescent quantitative PCR, western blot analysis, and immunofluorescence assays, the expression of the maternal c-mos gene, the protein level of mitogen-activated protein kinase 1 (MAPK1), and the change in the localization of spindles and nuclei during the demecolcine treatment were analyzed in bovine oocytes. Results: Treatment of bovine oocytes with both demecolcine (0.6 μg/mL) and sucrose (0.05 M) for 1 h led to the highest rate of membrane protrusions, and synergistic effects were also observed. Real-time fluorescent quantitative PCR analysis revealed that the demecolcine treatment up-regulated the expression of the maternal c-mos gene. Western blot analysis indicated that the demecolcine treatment enhanced the protein level of MAPK1 in bovine oocytes. Immunofluorescence analysis indicated that the spindles and nuclei were localized at the place of the membrane protrusions. Conclusions: The present results suggest that demecolcine might contribute to the activation of the Mos/MAPK pathway and affect spindle structure. These results provide a reference for more efficient generation of enucleated bovine oocytes.

Microtubule-Dependent Regulation of Mitotic Protein Degradation

Accurate cell division depends on tightly regulated ubiquitylation events catalyzed by the anaphase-promoting complex (APC/C). Among its many substrates, the APC/C triggers the degradation of proteins that stabilize the mitotic spindle, and loss or accumulation of such spindle assembly factors can result in aneuploidy and cancer. Although critical for cell division, it has remained poorly understood how the timing of spindle assembly factor degradation is established during mitosis. Here, we report that active spindle assembly factors are protected from APC/C-dependent degradation by microtubules. In contrast, those molecules that are not bound to microtubules are highly susceptible to proteolysis and turned over immediately after APC/C activation. The correct timing of spindle assembly factor degradation, as achieved by this regulatory circuit, is required for accurate spindle structure and function. We propose that the localized stabilization of APC/C substrates provides a mechanism for the selective disposal of cell-cycle regulators that have fulfilled their mitotic roles.

Phosphorylation of eIF4GII and 4E-BP1 in response to nocodazole treatment: A reappraisal of translation initiation during mitosis

Translation mechanisms at different stages of the cell cycle have been studied for many years, resulting in the dogma that translation rates are slowed during mitosis, with cap-independent translation mechanisms favored to give expression of key regulatory proteins. However, such cell culture studies involve synchronization using harsh methods, which may in themselves stress cells and affect protein synthesis rates. One such commonly used chemical is the microtubule de-polymerization agent, nocodazole, which arrests cells in mitosis and has been used to demonstrate that translation rates are strongly reduced (down to 30% of that of asynchronous cells). Using synchronized HeLa cells released from a double thymidine block (G1/S boundary) or the Cdk1 inhibitor, RO3306 (G2/M boundary), we have systematically re-addressed this dogma. Using FACS analysis and pulse labeling of proteins with labeled methionine, we now show that translation rates do not slow as cells enter mitosis. This study is complemented by studies employing confocal microscopy, which show enrichment of translation initiation factors at the microtubule organizing centers, mitotic spindle, and midbody structure during the final steps of cytokinesis, suggesting that translation is maintained during mitosis. Furthermore, we show that inhibition of translation in response to extended times of exposure to nocodazole reflects increased eIF2α phosphorylation, disaggregation of polysomes, and hyperphosphorylation of selected initiation factors, including novel Cdk1-dependent N-terminal phosphorylation of eIF4GII. Our work suggests that effects on translation in nocodazole-arrested cells might be related to those of the treatment used to synchronize cells rather than cell cycle status.

MKlp2 inhibitior paprotrain affects polar body extrusion during mouse oocyte maturation

BackgroundMammalian oocyte meiotic maturation involves a number of important processes, including spindle assembly and migration, cortical reorganization and polar body extrusion. Numerous proteins contribute to these processes, but it is unknown whether MKlp2 (mitotic kinesin-like protein 2; also called KIF20A), a microtubule-associated protein that regulates cytokinesis during mitosis, is involved in oocyte maturation.MethodsConfocal microscopy, time lapse microscopy, inhibitor treatment were adopted to examine the roles of MKlp2 in mouse oocyte.ResultsImmunostaining results showed that MKlp2 localized to oocyte microtubules. Time-lapse microscopy showed that disrupting MKlp2 expression with paprotrain, a specific inhibitor of MKlp2, resulted in polar body extrusion failure. This could be rescued after rescuing oocytes from paprotrain in fresh medium. Cell cycle analysis showed that most oocytes were arrested at metaphase I or telophase I. However, oocyte spindle structure and chromosome alignment were not disrupted after the inhibition of MKlp2 by paprotrain.ConclusionsThis study demonstrated that MKlp2 is crucial for oocyte maturation by regulating polar body extrusion.

Radmis, a Novel Mitotic Spindle Protein that Functions in Cell Division of Neural Progenitors

Developmental dynamics of neural stem/progenitor cells (NSPCs) are crucial for embryonic and adult neurogenesis, but its regulatory factors are not fully understood. By differential subtractive screening with NSPCs versus their differentiated progenies, we identified the radmis (radial fiber and mitotic spindle)/ckap2l gene, a novel microtubule-associated protein (MAP) enriched in NSPCs. Radmis is a putative substrate for the E3-ubiquitin ligase, anaphase promoting complex/cyclosome (APC/C), and is degraded via the KEN box. Radmis was highly expressed in regions of active neurogenesis throughout life, and its distribution was dynamically regulated during NSPC division. In embryonic and perinatal brains, radmis localized to bipolar mitotic spindles and radial fibers (basal processes) of dividing NSPCs. As central nervous system development proceeded, radmis expression was lost in most brain regions, except for several neurogenic regions. In adult brain, radmis expression persisted in the mitotic spindles of both slowly-dividing stem cells and rapid amplifying progenitors. Overexpression of radmis in vitro induced hyper-stabilization of microtubules, severe defects in mitotic spindle formation, and mitotic arrest. In vivo gain-of-function using in utero electroporation revealed that radmis directed a reduction in NSPC proliferation and a concomitant increase in cell cycle exit, causing a reduction in the Tbr2-positive basal progenitor population and shrinkage of the embryonic subventricular zone. Besides, radmis loss-of-function by shRNAs induced the multipolar mitotic spindle structure, accompanied with the catastrophe of chromosome segregation including the long chromosome bridge between two separating daughter nuclei. These findings uncover the indispensable role of radmis in mitotic spindle formation and cell-cycle progression of NSPCs.

Spindle and Chromosomal Alterations in Metaphase II Oocytes

The spindle apparatus is a vital structure and must be structurally intact for proper segregation of the oocyte's genetic material during metaphase II. Endometriosis, oxidative stress, and cryopreservation can all adversely affect the structural integrity of the spindle, potentially resulting in aneuploidy and spontaneous abortion of the embryo. Advances in spindle imagery have made it possible to visualize the effects of environmental stresses on spindle structure. Deviation from an oocyte's normal environment can seriously impair the positioning and integrity of the spindle. Oocytes cryopreservation causes depolymerization and repolymerization of the spindle. Oocytes can also be preserved in an immature state for later in vitro maturation. A comprehensive understanding of the spindle behavior is paramount for the effective manipulation of oocytes in an assisted reproductive setting.