Spindle Pole Body Component Research Articles

Schizosaccharomyces pombe NIMA-related kinase, Fin1, regulates spindle formation and an affinity of Polo for the SPB.

The Aspergillus nidulans protein kinase NIMA regulates mitotic commitment, while the human and Xenopus equivalents influence centrosome function. Two recessive, temperature-sensitive mutations in the Schizosaccharomyces pombe NIMA homologue, Fin1, blocked spindle formation at 37 degrees C. One of the two spindle pole bodies (SPBs) failed to nucleate microtubules. This phenotype was reduced by accelerating mitotic commitment through genetic inhibition of Wee1 or activation of either Cdc25 or Cdc2. Polo kinase (Plo1) normally associates with the SPB of mitotic, but not interphase cells. cut12.s11 is a dominant mutation in an SPB component that both suppresses cdc25 mutants and promotes Plo1 association with the interphase SPB. Both cut12.s11 phenotypes were abolished by removing Fin1 function. Elevating Fin1 levels promoted Plo1 recruitment to the interphase SPB of wild-type cells and reduced the severity of the cdc25.22 phenotype. These data are consistent with Fin1 regulating Plo1 function during mitotic commitment. The fin1 mitotic commitment and spindle phenotypes resemble distinct nimA phenotypes in different systems and suggest that the function of this family of kinases may be conserved across species.

HIV-1 integrase interacts with yeast microtubule-associated proteins

The human immunodeficiency virus type 1 (HIV-1) integrase (IN) mediates the insertion of viral DNA into the human genome. In addition to IN, cellular and viral proteins are associated to proviral DNA in the so-called preintegration complex (PIC). We previously reported that the expression of HIV-1 IN in yeast leads to the emergence of a lethal phenotype. This effect may be linked to the IN activity on infected human cells where integration requires the cleavage of genomic DNA. To isolate and characterize potential cellular partners of HIV-1 IN, we used it as a bait in a two-hybrid system with a yeast genomic library. IN interacted with proteins belonging to the microtubule network, or involved in the protein synthesis apparatus. We focused our interest on one of the selected inserts, L2, which corresponds to the C-end half of the yeast STU2p, a microtubule-associated protein (MAP). STU2p is an essential component of the yeast spindle pole body (SPB), which is able to bind microtubules in vitro. After expressing and purifying L2 as a recombinant protein, we showed its binding to IN by ELISA immunodetection. L2 was also able to inhibit IN activity in vitro. In addition, the effect of L2 was tested using the “lethal yeast phenotype”. The coexpression of IN and the L2 peptide abolished the lethal phenotype, thus showing important in vivo interactions between IN and L2. The identification of components of the microtubule network associated with IN suggest a role of this complex in the transport of HIV-1 IN present in the PIC to the nucleus, as already described for other human viruses.

A Method for Functional Mapping of Protein–Protein Binding Domain by Preferential Amplification of the Shortest Amplicon Using PCR

We have developed a novel method for rapid and empirical mapping of the protein interaction domain using a unique and atypical PCR-based amplification and a conventional yeast two-hybrid system. The modified PCR, designated as PASA-PCR, enables preferential amplification of the shortest amplicon from a complex expression library. PASA-PCR consists of reiterative cycles of denaturation of template DNAs and extremely abbreviated annealing/extension of primers to prevent their complete extension in a single cycle, followed by conventional amplification cycles. In PASA-PCR, the shortest (ranging from 400 to 1000 bp) amplicon is amplified almost exclusively from templates of various amplicon sizes. In addition, the frequency of in vitro recombination can be increased using low cooling rates (<0.5°C/s) between the denaturation and annealing/extension steps, which was helpful in generating precisely trimmed protein-coding regions. Identification of Spc19-binding region of Spc34, which is a component of yeast's spindle pole body, was achieved by a combination of the yeast two-hybrid system and PASA-PCR.

Fission yeast mutants affecting telomere clustering and meiosis-specific spindle pole body integrity.

In meiotic prophase of many eukaryotic organisms, telomeres attach to the nuclear envelope and form a polarized configuration called the bouquet. Bouquet formation is hypothesized to facilitate homologous chromosome pairing. In fission yeast, bouquet formation and telomere clustering occurs in karyogamy and persists throughout the horsetail stage. Here we report the isolation and characterization of six mutants from our screen for meiotic mutants. These mutants show defective telomere clustering as demonstrated by mislocalization of Swi6::GFP, a heterochromatin-binding protein, and Taz1p::GFP, a telomere-specific protein. These mutants define four complementation groups and are named dot1 to dot4-defective organization of telomeres. dot3 and dot4 are allelic to mat1-Mm and mei4, respectively. Immunolocalization of Sad1, a protein associated with the spindle pole body (SPB), in dot mutants showed an elevated frequency of multiple Sad1-nuclei signals relative to wild type. Many of these Sad1 foci were colocalized with Taz1::GFP. Impaired SPB structure and function were further demonstrated by failure of spore wall formation in dot1, by multiple Pcp1::GFP signals (an SPB component) in dot2, and by abnormal microtubule organizations during meiosis in dot mutants. The coincidence of impaired SPB functions with defective telomere clustering suggests a link between the SPB and the telomere cluster.

The yeast protein kinase Mps1p is required for assembly of the integral spindle pole body component Spc42p.

Saccharomyces cerevisiae MPS1 encodes an essential protein kinase that has roles in spindle pole body (SPB) duplication and the spindle checkpoint. Previously characterized MPS1 mutants fail in both functions, leading to aberrant DNA segregation with lethal consequences. Here, we report the identification of a unique conditional allele, mps1–8, that is defective in SPB duplication but not the spindle checkpoint. The mutations in mps1-8 are in the noncatalytic region of MPS1, and analysis of the mutant protein indicates that Mps1-8p has wild-type kinase activity in vitro. A screen for dosage suppressors of the mps1-8 conditional growth phenotype identified the gene encoding the integral SPB component SPC42. Additional analysis revealed that mps1-8 exhibits synthetic growth defects when combined with certain mutant alleles of SPC42. An epitope-tagged version of Mps1p (Mps1p-myc) localizes to SPBs and kinetochores by immunofluorescence microscopy and immuno-EM analysis. This is consistent with the physical interaction we detect between Mps1p and Spc42p by coimmunoprecipitation. Spc42p is a substrate for Mps1p phosphorylation in vitro, and Spc42p phosphorylation is dependent on Mps1p in vivo. Finally, Spc42p assembly is abnormal in a mps1-1 mutant strain. We conclude that Mps1p regulates assembly of the integral SPB component Spc42p during SPB duplication.

ADY1, a novel gene required for prospore membrane formation at selected spindle poles in Saccharomyces cerevisiae.

ADY1 is identified in a genetic screen for genes on chromosome VIII of Saccharomyces cerevisiae that are required for sporulation. ADY1 is not required for meiotic recombination or meiotic chromosome segregation, but it is required for the formation of four spores inside an ascus. In the absence of ADY1, prospore formation is restricted to mainly one or two spindle poles per cell. Moreover, the two spores in the dyads of the ady1 mutant are predominantly nonsisters, suggesting that the proficiency to form prospores is not randomly distributed to the four spindle poles in the ady1 mutant. Interestingly, the meiosis-specific spindle pole body component Mpc54p, which is known to be required for prospore membrane formation, is localized predominantly to only one or two spindle poles per cell in the ady1 mutant. A partially functional Myc-Pfs1p is localized to the nucleus of mononucleate meiotic cells but not to the spindle pole body or prospore membrane. These results suggest that Pfs1p is specifically required for prospore formation at selected spindle poles, most likely by ensuring the functionality of all four spindle pole bodies of a cell during meiosis II.

Cytoplasmic microtubular system implicated in de novo formation of a Rabl-like orientation of chromosomes in fission yeast.

Chromosomes are not packed randomly in the nucleus. The Rabl orientation is an example of the non-random arrangement of chromosomes, centromeres are grouped in a limited area near the nuclear periphery and telomeres are located apart from centromeres. This orientation is established during mitosis and maintained through subsequent interphase in a range of species. We report that a Rabl-like configuration can be formed de novo without a preceding mitosis during the transition from the sexual phase to the vegetative phase of the life cycle in fission yeast. In this process, each of the dispersed centromeres is often associated with a novel Sad1-containing body that is contacting a cytoplasmic microtubule laterally (Sad1 is a component of the spindle pole body (SPB)). The Sad1-containing body was colocalized with other known SPB components, Kms1 and Spo15 but not with Cut12, indicating that it represents a novel SPB-related complex. The existence of the triplex structure (centromere-microtubule-Sad1 body) suggests that the clustering of centromeres is controlled by a cytoplasmic microtubular system. Accordingly, when microtubules are destabilized, clustering is markedly reduced.

Yeast Mps1p Phosphorylates the Spindle Pole Component Spc110p in the N-terminal Domain

The yeast spindle pole body (SPB) component Spc110p (Nuf1p) undergoes specific serine/threonine phosphorylation as the mitotic spindle apparatus forms, and this phosphorylation persists until cells enter anaphase. We demonstrate that the dual-specificity kinase Mps1p is essential for the mitosis-specific phosphorylation of Spc110p in vivo and that Mps1p phosphorylates Spc110p in vitro. Phosphopeptides generated by proteolytic cleavage were identified and sequenced by mass spectrometry. Ser(60), Thr(64), and Thr(68) are the major sites in Spc110p phosphorylated by Mps1p in vitro, and alanine substitution at these sites abolishes the mitosis-specific isoform in vivo. This is the first time that phosphorylation sites of an SPB component have been determined, and these are the first sites of Mps1p phosphorylation identified. Alanine substitution for any one of these phosphorylated residues, in conjunction with an alanine substitution at residue Ser(36), is lethal in combination with alleles of SPC97, which encodes a component of the Tub4p complex. Consistent with a specific dysfunction for the alanine substitution mutations, simultaneous mutation of all four serine/threonine residues to aspartate does not confer any defect. Sites of Mps1p phosphorylation and Ser(36) are located within the N-terminal globular domain of Spc110p, which resides at the inner plaque of the SPB and binds the Tub4p complex.

Molecular dissection of yeast spindle pole bodies by two hybrid, in vitro binding, and co-purification

Publisher Summary This chapter focuses on three approaches that proved to be powerful tools in the molecular dissection of the budding yeast spindle pole bodies (SPB): (1) the yeast two hybrid system, (2) immuno- and affinity precipitation of SPB subcomplexes, and (3) in vitro binding of SPB components. The yeast two-hybrid system is based on the observation that the transcriptional activator Gal4p is composed of two distinct domains: a DNA-binding, Gal4pDNA, and an acidic transactivation domain, Gal4pTA. A functional transcription factor is restored when the separated Gal4p domains are joined together by interacting proteins: one of them fused to Gal4pDNA and the other to Gal4pTA. The reconstituted Gal4p activates reporter genes under the control of a GALUAS. Immuno- and affinity precipitation have been used in the field of SPB research to identify new interactors of known SPB components and to confirm interactions found by the yeast two-hybrid system. The principal of immunoprecipitation is to enrich proteins via an antibody antigen binding reaction. In contrast to the two-hybrid approach and coimmunoprecipitation, in vitro binding of SPB proteins method demonstrates that two proteins interact directly with each other.

Genetic analysis of yeast spindle pole bodies

This chapter discusses the genetic analysis of yeast spindle pole bodies. The chapter explains the concepts and methods for three powerful genetic screens that have been fruitful in yielding spindle pole body (SPB) components: a dosage-dependent suppressor screen, an extragenic suppressor screen, and a synthetic lethal screen. An advantage of genetic screens is their sensitivity and encompassing nature. Genetic screens can identify components found in low abundance. Moreover, genetic screens may provide a connection between components that do not physically interact with each other but instead function in the same or parallel pathway. Dosage-dependent suppressor screen searches for genes that suppress a mutant phenotype when present in extra copies. The mechanism of suppression may be direct by promoting binding of one protein to another. In an extragenic suppressor screen, one starts with a given mutant phenotype and searches for genes that are able to suppress this phenotype when mutated. This type of screen can reveal a physical interaction among the products of two genes. Moreover, the basis for synthetic lethal screen concerns the interaction of mutations in two separate genes.

Mutations in SPC110, encoding the yeast spindle pole body calmodulin-binding protein, cause defects in cell integrity as well as spindle formation

The 110 kDa spindle pole body component, Spc110p, is an essential target of calmodulin in budding yeast. Cells with mutations which reduce calmodulin binding to Spc110p are unable to form a mitotic spindle and die. Here we show that these effects can be overcome either directly by increasing extracellular calcium or calmodulin expression, which reverse the primary spindle defect, or indirectly through increased extracellular osmolarity or high dosage of MID2 or SLG1/ HCS77/ WSC1 which preserve viability. We propose that overcoming a cell integrity defect associated with the mitotic arrest enables the defective spindle pole bodies to provide sufficient function for proliferation of a large proportion of mutant cells. Our findings demonstrate a role for calcium in the Spc110p-calmodulin interaction in vivo and have important general implications for the interpretation of genetic interactions involving cell integrity genes.

Nud1p links astral microtubule organization and the control of exit from mitosis.

The budding yeast spindle pole body (SPB) not only organizes the astral and nuclear microtubules but is also associated with a number of cell-cycle regulators that control mitotic exit. Here, we describe that the core SPB component Nud1p is a key protein that functions in both processes. The astral microtubule organizing function of Nud1p is mediated by its interaction with the gamma-tubulin complex binding protein Spc72p. This function of Nud1p is distinct from its role in cell-cycle control: Nud1p binds the spindle checkpoint control proteins Bfa1p and Bub2p to the SPB, and is part of the mitotic exit network (MEN) in which it functions upstream of CDC15 but downstream of LTE1. In conditional lethal nud1-2 cells, the MEN component Tem1p, a GTPase, is mislocalized, whereas the kinase Cdc15p is still associated with the SPB. Thus, in nud1-2 cells the failure of Tem1p to interact with Cdc15p at the SPB probably prevents mitotic exit.

The fission yeast ran GTPase is required for microtubule integrity.

The microtubule cytoskeleton plays a pivotal role in cytoplasmic organization, cell division, and the correct transmission of genetic information. In a screen designed to identify fission yeast genes required for chromosome segregation, we identified a strain that carries a point mutation in the SpRan GTPase. Ran is an evolutionarily conserved eukaryotic GTPase that directly participates in nucleocytoplasmic transport and whose loss affects many biological processes. Recently a transport-independent effect of Ran on spindle formation in vitro was demonstrated, but the in vivo relevance of these findings was unclear. Here, we report the characterization of a Schizosaccharomyces pombe Ran GTPase partial loss of function mutant in which nucleocytoplasmic protein transport is normal, but the microtubule cytoskeleton is defective, resulting in chromosome missegregation and abnormal cell shape. These abnormalities are exacerbated by microtubule destabilizing drugs, by loss of the spindle checkpoint protein Mph1p, and by mutations in the spindle pole body component Cut11p, indicating that SpRan influences microtubule integrity. As the SpRan mutant phenotype can be partially suppressed by the presence of extra Mal3p, we suggest that SpRan plays a role in microtubule stability.

Functional interaction between the PKC1 pathway and CDC31 network of SPB duplication genes.

The earliest known step in yeast spindle pole body (SPB) duplication requires Cdc31p and Kar1p, two physically interacting SPB components, and Dsk2p and Rad23p, a pair of ubiquitin-like proteins. Components of the PKC1 pathway were found to interact with these SPB duplication genes in two independent genetic screens. Initially, SLG1 and PKC1 were obtained as high-copy suppressors of dsk2Delta rad23Delta and a mutation in MPK1 was synthetically lethal with kar1-Delta17. Subsequently, we demonstrated extensive genetic interactions between the PKC1 pathway and the SPB duplication mutants that affect Cdc31p function. The genetic interactions are unlikely to be related to the cell-wall integrity function of the PKC1 pathway because the SPB mutants did not exhibit cell-wall defects. Overexpression of multiple PKC1 pathway components suppressed the G2/M arrest of the SPB duplication mutants and mutations in MPK1 exacerbated the cell cycle arrest of kar1-Delta17, suggesting a role for the PKC1 pathway in SPB duplication. We also found that mutations in SPC110, which encodes a major SPB component, showed genetic interactions with both CDC31 and the PKC1 pathway. In support of the model that the PKC1 pathway regulates SPB duplication, one of the phosphorylated forms of Spc110p was absent in pkc1 and mpk1Delta mutants.

Interaction of the yeast gamma-tubulin complex-binding protein Spc72p with Kar1p is essential for microtubule function during karyogamy.

The spindle pole body component Kar1p has a function in nuclear fusion during conjugation, a process known as karyogamy. The molecular role of Kar1p during this process is poorly understood. Here we show that the yeast gamma-tubulin complex-binding protein Spc72p interacts directly with the N-terminal domain of Kar1p, thereby targeting the gamma-tubulin complex to the half bridge, a substructure of the spindle pole body, where it organizes microtubules. This binding of Spc72p to Kar1p has only a minor role during vegetative growth, whereas it becomes essential for karyogamy in mating cells, explaining the important role of Kar1p in this process. We also show that the localization of Spc72p within the spindle pole body changes throughout the cell cycle and even more strongly in response to mating pheromone. Taken together, these observations suggest that the relocalization of Spc72p within the spindle pole body is the 'landmark' event in the pheromone-induced reorganization of the cytoplasmic microtubules.

Localization of core spindle pole body (SPB) components during SPB duplication in Saccharomyces cerevisiae.

We have examined the process of spindle pole body (SPB) duplication in Saccharomyces cerevisiae by electron microscopy and found several stages. These include the assembly, probably from the satellite, of a large plaque-like structure, the duplication plaque, on the cytoplasmic face of the half-bridge and its insertion into the nuclear envelope. We analyzed the role of the main SPB components in the formation of these structures by identifying them from an SPB core fraction by mass spectrometry. Temperature-sensitive mutants for two of the components, Spc29p and Nud1p, were prepared to partly define their function. The composition of two of the intermediates in SPB duplication, the satellite and the duplication plaque, was examined by immunoelectron microscopy. Both contain cytoplasmic SPB components showing that duplication has already been partly achieved by the end of the preceding cell cycle when the satellite is formed. We show that by overexpression of SPB components the structure of the satellite can be changed and SPB duplication inhibited by disrupting the attachment of the plaque-like intermediate to the half-bridge. We present a model for SPB duplication where binding of SPB components to either end of the bridge structure ensures two separate SPBs.

Microtubule organization by the budding yeast spindle pole body

In budding yeast microtubule organizing functions are provided by the spindle pole body (SPB), a multi-layered structure that is embedded in the nuclear envelope throughout the cell cycle. The SPB organizes the nuclear and cytoplasmic microtubules which are spatially and functionally distinct. Microtubule formation in yeast requires the Tub4p-complex, containing the gamma-tubulin Tub4p, and two additional proteins, the SPB components Spc97p and Spc98p. The Tub4p complex assembles in the cytoplasm and is then anchored to the sides of the SPB which organize microtubules. This is achieved by the binding of Spc97p and Spc98p to so-called gamma-tubulin complex binding proteins (GTBPs) at the SPB. Spc72p is the yeast GTBP at the cytoplasmic side of the SPB, while Spc110p is the nuclear GTBP. Both GTBPs control the number of Tub4p complexes associated with the SPB and thereby the number of microtubules formed. In addition, the GTBPs may regulate the activity of the Tub4p complex. Homologues of Spc97p and Spc98p have been identified from yeast to mammalian cells and these are also part of gamma-tubulin complexes, suggesting that these related proteins may also interact with GTBPs at the centrosome. Candidates for GTBPs have been identified in mammalian and insect cells.

Saccharomyces cerevisiae Ndc1p is a shared component of nuclear pore complexes and spindle pole bodies.

We report a novel connection between nuclear pore complexes (NPCs) and spindle pole bodies (SPBs) revealed by our studies of the Saccharomyces cerevisiae NDC1 gene. Although both NPCs and SPBs are embedded in the nuclear envelope (NE) in yeast, their known functions are quite distinct. Previous work demonstrated that NDC1 function is required for proper SPB duplication (Winey, M., M.A. Hoyt, C. Chan, L. Goetsch, D. Botstein, and B. Byers. 1993. J. Cell Biol. 122:743-751). Here, we show that Ndc1p is a membrane protein of the NE that localizes to both NPCs and SPBs. Indirect immunofluorescence microscopy shows that Ndc1p displays punctate, nuclear peripheral localization that colocalizes with a known NPC component, Nup49p. Additionally, distinct spots of Ndc1p localization colocalize with a known SPB component, Spc42p. Immunoelectron microscopy shows that Ndc1p localizes to the regions of NPCs and SPBs that interact with the NE. The NPCs in ndc1-1 mutant cells appear to function normally at the nonpermissive temperature. Finally, we have found that a deletion of POM152, which encodes an abundant but nonessential nucleoporin, suppresses the SPB duplication defect associated with a mutation in the NDC1 gene. We show that Ndc1p is a shared component of NPCs and SPBs and propose a shared function in the assembly of these organelles into the NE.

SPC72: a spindle pole component required for spindle orientation in the yeast Saccharomyces cerevisiae.

The monoclonal antibody 78H6 recognises an 85 kDa component of the yeast spindle pole body. Here we identify and characterise this component as Spc72p, the product of YAL047C. The sequence of SPC72 contains potential coiled-coil domains; its overexpression induced formation of large polymers that were strictly localised at the outer plaque and at the bridge of the spindle pole body. Immunoelectron microscopy confirmed that Spc72p was a component of these polymers. SPC72 was found to be non-essential for cell growth, but its deletion resulted in abnormal spindle positioning, aberrant nuclear migration and defective mating capability. Precisely, deletion of SPC72 resulted in a decreased number of astral microtubules: early in the cell cycle only few were detectable, and these were unattached to the spindle pole body in small-budded cells. Later in the cell cycle few, if any, remained, and they were unable to align the spindle properly. We conclude that Spc72p is not absolutely required for nucleation per se, but is needed for normal abundance and stability of astral microtubules.

Receptors determine the cellular localization of a gamma-tubulin complex and thereby the site of microtubule formation.

The yeast microtubule organizing centre (MTOC), known as the spindle pole body (SPB), organizes the nuclear and cytoplasmic microtubules which are functionally and spatially distinct. Microtubule organization requires the yeast gamma-tubulin complex (Tub4p complex) which binds to the nuclear side of the SPB at the N-terminal domain of Spc110p. Here, we describe the identification of the essential SPB component Spc72p whose N-terminal domain interacts with the Tub4p complex on the cytoplasmic side of the SPB. We further report that this Tub4p complex-binding domain of Spc72p is essential and that temperature-sensitive alleles of SPC72 or overexpression of a binding domain-deleted variant of SPC72 (DeltaN-SPC72) impair cytoplasmic microtubule formation. Consequently, polynucleated and anucleated cells accumulated in these cultures. In contrast, overexpression of the entire SPC72 results in more cytoplasmic microtubules compared with wild-type. Finally, exchange of the Tub4p complex-binding domains of Spc110p and Spc72p established that the Spc110p domain, when attached to DeltaN-Spc72p, was functional at the cytoplasmic site of the SPB, while the corresponding domain of Spc72p fused to DeltaN-Spc110p led to a dominant-negative effect. These results suggest that different components of MTOCs act as receptors for gamma-tubulin complexes and that they are essential for the function of MTOCs.