Spin Crossover Research Articles

Molecular mechanics simulations of lattice dynamical properties of the spin crossover complex [Fe(pyrazine)][Ni(CN)4

An empirical molecular mechanics force field has been built for the [Fe(pyrazine)][Ni(CN)4] spin crossover complex using Raman spectroscopic and nuclear inelastic scattering data. Based on this force field, molecular dynamics simulations were conducted to investigate the lattice dynamical properties of the complex in the high-spin and low-spin states. The extracted thermodynamic and mechanical parameters match well with the corresponding experimental data. Most importantly, the force field can successfully reproduce the low-frequency acoustic part of the partial densities of vibrational states, which is vital for the understanding the thermodynamic analysis of the spin crossover phenomenon in crystalline solids and which would be difficult to tackle by quantum mechanical methods.

Improving the Oxygen Evolution Activity of Layered Double-Hydroxide via Erbium-Induced Electronic Engineering.

Layered double-hydroxide (LDH) has been considered an important class of electrocatalysts for the oxygen evolution reaction (OER), but the adsorption-desorption behaviors of oxygen intermediates on its surface still remain unsatisfactory. Apart from transition-metal doping to solve this electrocatalytic problem of LDH, rare-earth (RE) species have sprung up as emerging dopants owing to their unique 4f valence-electronic configurations. Herein, the Er is chosen as a RE model to improve OER activity of LDH via constructing nickel foam supported Er-doped NiFe-LDH catalyst (Er-NiFe-LDH@NF). The optimal Er-NiFe-LDH@NF exhibits a low overpotential (191mV at 10mA cm-2 ), high turnover frequency (0.588 s-1 ), and low activation energy (36.03kJ mol-1 ), which are superior to Er-free sample. Electrochemical in situ Raman spectra reveal the facilitated transition of Ni-OH into Ni-OOH for promoted OER kinetics through the Er doping effect. Theoretical calculations demonstrate that the introduction of Er facilitates the spin crossover of valence electrons by optimizing the d band center of NiFe-LDH, which leads to the GO -GHO closer to the optimal activity of the kinetic OER volcano by balancing the bonding strength of *O and *OH. Moreover, the Er-NiFe-LDH@NF presents high practicability in electrochemical water-splitting devices with a low driving potential of and a well-extended driving period.

Near-Room-Temperature Magnetoelectric Coupling via Spin Crossover in an Iron(II) Complex.

Magnetoelectric coupling is achieved near room temperature in a spin crossover FeII molecule-based compound, [Fe(1bpp)2 ](BF4 )2 . Large atomic displacements resulting from Jahn-Teller distortions induce a change in the molecule dipole moment when switching between high-spin and low-spin states leading to a step-wise change in the electric polarization and dielectric constant. For temperatures in the region of bistability, the changes in magnetic and electrical properties are induced with a remarkably low magnetic field of 3 T. This result represents a successful expansion of magnetoelectric spin crossovers towards ambient conditions. Moreover, the observed 0.3-0.4 mC m-2 changes in the H-induced electric polarization suggest that the high strength of the coupling obtained via this route is accessible not just at cryogenic temperatures but also near room temperature, a feature that is especially appealing in the light of practical applications.

Near‐Room‐Temperature Magnetoelectric Coupling via Spin Crossover in an Iron(II) Complex

AbstractMagnetoelectric coupling is achieved near room temperature in a spin crossover FeII molecule‐based compound, [Fe(1bpp)2](BF4)2. Large atomic displacements resulting from Jahn–Teller distortions induce a change in the molecule dipole moment when switching between high‐spin and low‐spin states leading to a step‐wise change in the electric polarization and dielectric constant. For temperatures in the region of bistability, the changes in magnetic and electrical properties are induced with a remarkably low magnetic field of 3 T. This result represents a successful expansion of magnetoelectric spin crossovers towards ambient conditions. Moreover, the observed 0.3–0.4 mC m−2 changes in the H‐induced electric polarization suggest that the high strength of the coupling obtained via this route is accessible not just at cryogenic temperatures but also near room temperature, a feature that is especially appealing in the light of practical applications.

The Halogen Effect on the Magnetic Behaviour of Dimethylformamide Solvates in [Fe(halide-salEen)2]BPh4

Complexes [Fe(X-salEen)2]BPh4·DMF, with X = Br (1), Cl (2), and F (3), were crystallised from N,N′-dimethylformamide with the aim of understanding the role of a high boiling point N,N′-dimethylformamide solvate in the spin crossover phenomenon. The counter ion was chosen for only being able to participate in weak intermolecular interactions. The compounds were structurally characterised by single crystal X-ray diffraction. Complex 1 crystallised in the orthorhombic space group P212121, and complexes 2 and 3 in the monoclinic space group P21/n. Even at room temperature, low spin was the predominant form, although complex 2 exhibited the largest proportion of the high-spin species according to both the magnetisation measurements and the Mössbauer spectra. Density Functional Theory calculations were performed both on the periodic solids and on molecular models for complexes 1–3 and the iodide analogue 4. While all approaches reproduced the experimental structures very well, the energy balance between the high-spin and low-spin forms was harder to reproduce, though some calculations pointed to the easier spin crossover of complex 2, as observed. Periodic calculations with the functional PBE led to very similar ΔEHS-LS values for all complexes but showed a preference for the low-spin form. However, the single-point calculations with B3LYP* showed, for the model without solvate, that the Cl complex should undergo spin crossover more easily. The molecular calculations also reflected this fact, which was more clearly defined when the cation–anion–solvate model was used. In the other models there was not much difference between the Cl, Br, and I complexes.

Exploring the impact of the nitrogen layer on a Cu(001) substrate on the spin crossover properties of [Fe(SalEen-I)2]Br: A DFT study

This work investigates the impact of the Cu:N ratio in the nitrogen layer of a Cu(001) substrate coated with [Fe(SalEen-I)2]Br, an Fe(III) spin crossover (SCO) molecule. Specifically, we probe Cu/Cu(001), Cu3N/Cu(001), Cu2N/Cu(001), and CuN/Cu(001) substrates. To explore the molecule-substrate interaction, density functional theory calculations with Hubbard-U correction (DFT + U) and van der Waals interactions were conducted. From the analysis of the electronic structure, we propose that Cu2N/Cu(001) is the best candidate due to its weak chemical bonding to the adsorbed molecule and preservation of SCO bistability. Based on the total-energy calculations of various adsorption geometries and binding sites, the iodine atoms of the molecule adsorbed diagonally on copper atoms of the Cu2N(001) surface in the low-spin state is the most stable configuration. The energy difference between the high- and low-spin states of this configuration is 8.48 kJ/mol, which is significantly decreased compared to that of the free molecule of 29.14 kJ/mol.

Spin Crossover Coordination Polymers with Pyridine-Like Modification through Selective Guest Molecules

A porous 3D FeII coordination polymer made of 4,4′-bipyridine ligands (bipy) and [N(CN)2]− (dca) organic bridges, [Fe(bipy)2dca]ClO4·CHCl3·CH3OH (1·CHCl3·CH3OH), has been synthesized as single crystals, by a slow diffusion technique at room temperature. Single-crystal X-ray diffraction analysis has shown that the structure of 1·CHCl3·CH3OH presents large volume values of porosity (1790 Å3 per iron atom). It crystallizes in the orthorhombic Cmc21 space group but undergoes a phase transition to Cmca at 298 K, presumably due to solvent release. According to magnetic data, this material displays a gradual spin crossover behavior, along with a thermal hysteresis loop of 15 K around 190 K. However, when lattice solvent molecules are removed, the magnetic behavior changes drastically resulting in more gradual spin conversion or even silencing the spin crossover behavior of the as-synthesized complex (1·CHCl3·CH3OH), evidencing the influence of guest molecules on the magnetic properties by host–guest interactions. This property was confirmed by spatiotemporal optical microscopy studies, performed on several single crystals. The generation of a host lattice that interacts with exchangeable guest species in a switchable fashion has implications for the generation of previously undeveloped advanced materials with applications in areas such as molecular sensing.

Host Spin-Crossover Thermodynamics Indicate Guest Fit.

Spin-crossover (SCO) metal-organic cages capable of switching between high-spin and low-spin states have the potential to be used as magnetic sensors and switches. Variation of the donor strength of heterocyclic aldehyde subcomponents in imine-based ligands can tune the ligand field for a FeII center, which results in both homoleptic and heteroleptic cages with diverse SCO behaviors. The tetrahedral SCO cage built from 1-methyl-1H-imidazole-2-carbaldehyde is capable of encapsulating various guests, which stabilize different cage spin states depending on guest size. Conversely, the SCO tetrahedron exhibits different affinities for guests in different spin states, which is inferred to result from subtle structural differences of the cavity caused by the change in metal center spin state. Examination of SCO thermodynamics across a series of host-guest complexes enabled sensitive probing of guest fit to the host cavity, providing information complementary to binding-constant determination.

High-Sensitivity Microthermometry Method Based on Vacuum-Deposited Thin Films Exhibiting Gradual Spin Crossover above Room Temperature.

We report on the fabrication, characterization, and microthermometry application of high-quality, nanometric thin films, with thicknesses in the range 20-200 nm, of the molecular spin-crossover complex [Fe(HB(1,2,3-triazol-1-yl)3)2]. The films were obtained by vacuum thermal evaporation and characterized by X-ray diffraction, UV spectrophotometry, and atomic force microscopy. The as-deposited films are dense and crystalline with a preferred [011] orientation of the monoclinic crystal lattice normal to the substrate surface. The films exhibit a gradual spin conversion centered at ca. 374 K spanning the 273-473 K temperature range, irrespective of their thickness. When deposited on a microelectronic device, these films can be used to enhance the UV-light thermoreflectance coefficient of reflective surfaces by more than an order of magnitude, allowing for high-sensitivity thermoreflectance thermal imaging.

Spin crossover mediated by hydrogen bonds in iodine-substituted manganese complexes

The reaction of Mn(Ⅱ) salts prepared with (5-I-sal-N-1,5,8,12)2− ligand where the hexadentate ligand is the product of the reaction of 5-iodosalicylaldehyde and N,N’-bis(3-aminopropyl)ethylenediamine in situ in MeOH/EtOH provided five complexes, [Mn(5-I-sal-N-1,5,8,12)]Y (Y = PF6− (1), AsF6− (2), SbF6− (3), BF4− (4), ClO4− (5)). All complexes crystallize without crystallizing solvents, except 4 with a H2O solvent molecule. Different structural features and magnetic profiles have been observed in complexes 1 − 3. Owing to the cooperativity of the NH···F and NH···I hydrogen bonds and I···π, I···F interactions, complexes 1 and 3 persist in the HS state at 2 − 400 K while complex 2 shows a gradual SCO with T1/2 is about 265 K. Hirshfeld face analysis reveals that the presence of different interactions in complexes 1 − 3. With decreasing the temperature, complex 4 undergoes an almost full SCO with T1/2 = 272 K, while complex 5 shows an incomplete SCO and remains 50% HS state until 30 K.

A Proton Conducting Cobalt(II) Spin Crossover Complex.

Spin crossover (SCO) complexes have been extensively explored as bistable materials and recently used as molecular modules for the development of new multifunctional molecular magnetic materials. Herein, we present the synthesis, crystal structure, magnetic, and electrical properties of a mononuclear cobalt complex constructed by a halogen-functionalized terpyridine derivative and organosulfonate. A complete and gradual spin transition with the T1/2 =200 K was observed for the Co2+ ions through both the magnetic measurement and dynamic crystallographic experiments. Interestingly, considerable room temperature proton conductivity of 6.9×10-5 S cm-1 under 98% relative humidity was evidenced because of the presence of sulfonate-assisted hydrogen-bonded proton hopping pathways. The forgoing results not only provide an unprecedented proton-conducting cobalt(II) SCO complex but also a promising way for the design and construction of bifunctional SCO molecular conductors via the incorporation of SCO transition and proton conduction.

New Ferrocene-Based Metalloligand with Two Triazole Carboxamide Pendant Arms and Its Iron(II) Complex: Synthesis, Crystal Structure, 57Fe Mössbauer Spectroscopy, Magnetic Properties and Theoretical Calculations

The new ferrocene-based metalloligand bis (N-4-[3,5-di-(2-pyridyl)-1,2,4-triazoyl])ferrocene carboxamide (L) was prepared through derivatization of 1,1′-ferrocenedicarboxylic acid with 4-amino-3,5-di(pyridyl)-4H-1,2,4-triazole. The composition and purity of L in the solid state was determined with elemental analysis, FT-IR spectroscopy, and its crystal structure with single-crystal X-ray analysis, which revealed that the substituted cyclopentadienyl rings adopt the antiperiplanar conformation and the crystal structure of L is stabilized by O–H···N and N–H···O hydrogen bonds. The molecular properties of L in solution were investigated with NMR and UV-VIS spectroscopies, and cyclic voltammetry disclosed irreversible redox behavior providing one oxidation peak at E1/2 = 1.133 V vs. SHE. Furthermore, the polymeric FeII complex {Fe(L)(C(CN)3)2}n (1) was prepared and characterized with elemental analysis, FT-IR spectroscopy, 57Fe Mössbauer spectroscopy, and magnetic measurements. The last two methods confirmed that a mixture of low- and high-spin species is present in 1; however, the spin crossover properties were absent. The presented study was also supported by theoretical calculations at the DFT/TD-DFT level of theory using TPSS and TPSSh functionals.

DFT insights into the mechanism of O2 activation catalyzed by a structural and functional model of cysteine dioxygenase with tris(2-pyridyl)methane-based ligand architecture

Cysteine dioxygenation is an important step in the metabolism of toxic L-cysteine (Cys) in the human body, carried out by cysteine dioxygenase enzyme (CDO). The disruption of this process is found to elicit neurological health issues. This work reports a computational investigation of mechanistic aspects of this reaction, using a recently reported tris(2-pyridyl)methane-based biomimetic model complex of CDO. The computed results indicate that, the initial SO2 bond formation process is the slowest step in the S-dioxygenation process, possessing an activation barrier of 12.7 kcal/mol. The remaining steps were found to be downhill requiring very small activation energies. The transition states were found to undergo spin crossover between triplet and quintet states, while the singlet surface remained unstable throughout the entire reaction. In essence, the mechanistic scheme and multistate reactivity pattern together with the relatively small computed rate-limiting activation barrier as well as the exothermic formation energy demonstrate that the model complex is an efficient biomimetic CDO model. In addition, the study also substantiates the involvement of Fe(IV)oxido intermediates in the mechanism of S-dioxygenation by the chosen model complex. The insights derived from the O2 activation process might pave way for development of more accurate CDO model catalysts that might be capable of even more efficiently mimicking the geometric, spectroscopic and functional features of the CDO enzyme.

Regulating Spin-State Switching by Integrating Polyoxometalate Anion into Spin Crossover System.

Polyoxometalate (POM) anions were successfully integrated into Fe(II) spin crossover (SCO) system, which demonstrates an effective role in regulating spin-state switching properties. Specifically, three drastically different magnetic behaviors of Fe(II) ion in the identical cation [Fe(bpp)2]2+ were achieved by leveraging [Mo6O19]2-, [Mo8O26]4-, and [Na(Mo8O26)]3-, respectively.

Highly Porous Cyanometallic Spin-Crossover Frameworks Employing Pyridazino[4,5-d]pyridazine Bridge

Single crystals of two spin-crossover (SCO) cyanometallic coordination polymers based on the pyridazino[4,5-d]pyridazine ligand (pp) of the composition [Fe(pp)M(CN)4]∙G (where M = Pd, Pt; G = guest molecules) were obtained by a slow diffusion technique. A single-crystal X-ray analysis showed that both compounds adopted the structure of porous 3D frameworks, consisting of heterometallic cyano-bridged layers and interlayer pillar pp ligands, with a total solvent accessible volume of ca. 160 Å3 per iron(II) ion (about 37% of the unit cell volume). These frameworks displayed hysteretic SCO behaviour with T1/2 of 150/190 K (heating/cooling) for Pd complex and 135/170 K (heating/cooling) for Pt complex, which was confirmed by variable-temperature SCXRD experiments. This research shows the perspective of using pp ligand for building porous MOFs with spin transitions.

C-PCM Study of Solvent Polarity Effect on Spin Crossover in Complex cis-[Fe(phen)2(NCS)2

C-PCM Study of Solvent Polarity Effect on Spin Crossover in Complex cis-[Fe(phen)2(NCS)2

Structural and Electronic Transitions in Liquid FeO Under High Pressure.

FeO represents an important end-member for planetary interiors mineralogy. However, its properties in the liquid state under high pressure are poorly constrained. Here, in situ high-pressure and high-temperature X-ray diffraction experiments, ab initio simulations, and thermodynamic calculations are combined to study the local structure and density evolution of liquid FeO under extreme conditions. Our results highlight a strong shortening of the Fe-Fe distance, particularly pronounced between ambient pressure and ∼40GPa, possibly related with the insulator to metal transition occurring in solid FeO over a similar pressure range. Liquid density is smoothly evolving between 60 and 150GPa from values calculated for magnetic liquid to those calculated for non-magnetic liquid, compatibly with a continuous spin crossover in liquid FeO. The present findings support the potential decorrelation between insulator/metal transition and the high-spin to low-spin continuous transition, and relate the changes in the microscopic structure with macroscopic properties, such as the closure of the Fe-FeO miscibility gap. Finally, these results are used to construct a parameterized thermal equation of state for liquid FeO providing densities up to pressure and temperature conditions expected at the Earth's core-mantle boundary.

Theoretical investigation of entropic barocaloric effect in spin-crossover systems

We report a theoretical investigation of the entropic barocaloric effect in a spin crossover system. From our model Hamiltonian, the total entropy, which includes the contributions from the lattice (vibrational), magnetic and configurational entropies, was obtained and worked out for a systematic study of the barocaloric effect. The barocaloric effect was parametrically investigated in three scenarios: second order, threshold of second-first order and first order phase transition. Besides, a procedure for obtaining the molecular volume change during the low spin to high spin phase transition conversion was proposed, through the entropic barocaloric measurements.

Modulation of Charge Distribution in Cobalt-α-Diimine Complexes toward Valence Tautomerism.

Valence tautomerism (VT) and spin crossover (SCO) are promising avenues for developing a range of molecular materials for sensing, memory, and optoelectronic applications. However, these phenomena arise only when specific metal-ligand combinations are employed. The underexplored combination of cobalt(II/III) paired with bis((aryl)imino)acenapthene (Ar-BIAN) ligands, which can exist as neutral Ar-BIAN0 (L0), monoanionic radical Ar-BIAN•- (L•-), and dianionic Ar-BIAN2- (L2-) forms, has potential to afford both VT and SCO. Aiming to develop a new family of switchable molecules, we systematically explored a dual-tuning approach by varying the redox state and aryl substituents in a series of homoleptic [Co(Ar-BIAN)3]n+ complexes (Ar = Ph, n = 2 (12+), 1 (1+), 0 (1); Ar = 3,5-CF3-Ph, n = 0 (2); Ar = 4-MeO-Ph, n = 2 (32+), 0 (3)). As a prelude to synthetic and experimental studies, density functional theory (DFT) calculations were used to explore the structure and relative energies of the different electronic forms of each complex, comprising different cobalt oxidation and spin states and different ligand oxidation states. Except for compound 3, DFT identified a HS-CoII-L0 containing ground state for all complexes, precluding thermally induced SCO or VT. For 3, calculations suggested a possible thermally accessible LS-CoIII-(L•-)3 ⇌ HS-CoII-(L•-)2(L0) VT interconversion. Experimentally, structural and magnetic data reveal a HS-CoII-L0 containing ground state for all six compounds in the solid state, including 3, discounting thermally induced VT or SCO. In solution, electrochemical and spectroscopic analysis also indicate that all compounds exist as the HS-CoII-L0-containing electromer at 298 K. Intervalence charge transfer (IVCT) bands observed for neutral 1, 2, and 3 at room temperature suggest the mixed-valence HS-CoII-(L•-)2(L0) charge distribution. However, cooling 3 to 243 K in acetonitrile uniquely affords a substantial reduction in the intensity of this IVCT band, consistent with thermally induced VT interconversion to the LS-CoIII-(L•-)3 ground state as predicted by DFT calculations. This study emphasizes the utility of computationally guided molecular design for complicated systems with redox activity at the metal and multiple ligands, thus opening new avenues for tuning electronic structure and developing new families of switchable molecules.

Modeling of Spin Crossover in Linear Trinuclear Complexes: Effects of External Pressure.

In the present study, a model is suggested to explain the course of spin transformation in crystals containing linear trinuclear iron(II) clusters as structural units. The energy spectrum of an isolated trimer is described with due allowance of the effects of the cubic crystal field formed by the nearest surrounding of each FeII ion as well as by consideration of intracluster interactions in the nearest neighbor approximation. The intercluster cooperative interaction promoting the spin transition is assumed to arise from the coupling of molecular modes with phonons, that is, a feature characteristic for molecular crystals containing as a structural element single spin-crossover ions or complexes formed by these ions. It is demonstrated that in dependence on the relative strengths of intra- and intercluster interactions, the trinuclear systems can exhibit a variety of different types of spin transitions and, namely, gradual, step-like transitions and those characterized by a hysteresis loop. The effects of external pressure on the spin transitions in crystals of trinuclear clusters are explored taking into account that pressure affects both the energy gap between the high-spin and low-spin states and the characteristic parameters of cooperative interaction. In the framework of the suggested model, the spin transformation in the Fe3(bntrz)6(tcnset)6 compound is comprehensively explained. The model also allows a qualitative and quantitative reproduction of the temperature and course of the spin transition in this compound under applied pressure.