Specific Molecular Recognition Research Articles

A perception-based nanosensor platform to detect cancer biomarkers.

Conventional molecular recognition elements, such as antibodies, present issues for developing biomolecular assays for use in certain technologies, such as implantable devices. Additionally, antibody development and use, especially for highly multiplexed applications, can be slow and costly. We developed a perception-based platform based on an optical nanosensor array that leverages machine learning algorithms to detect multiple protein biomarkers in biofluids. We demonstrated this platform in gynecologic cancers, often diagnosed at advanced stages, leading to low survival rates. We investigated the detection of protein biomarkers in uterine lavage samples, which are enriched with certain cancer markers compared to blood. We found that the method enables the simultaneous detection of multiple biomarkers in patient samples, with F1-scores of ~0.95 in uterine lavage samples from patients with cancer. This work demonstrates the potential of perception-based systems for the development of multiplexed sensors of disease biomarkers without the need for specific molecular recognition elements.

Antibody-Free Rapid Detection of SARS-CoV-2 Proteins Using Corona Phase Molecular Recognition to Accelerate Development Time.

To develop better analytical approaches for future global pandemics, it is widely recognized that sensing materials are necessary that enable molecular recognition and sensor assay development on a much faster scale than currently possible. Previously developed severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) point-of-care devices are based on the specific molecular recognition using subunit protein antibodies and protein receptors that selectively capture the viral proteins. However, these necessarily involve complex and lengthy development and processing times and are notoriously prone to a loss of biological activity upon sensor immobilization and device interfacing, potentially limiting their use in applications at scale. Here, we report a synthetic strategy for nanoparticle corona interfaces that enables the molecular recognition of SARS-CoV-2 proteins without any antibody and receptor design. Our nanosensor constructs consist of poly(ethylene glycol) (PEG)—phospholipid heteropolymers adsorbed onto near-infrared (nIR) fluorescent single-walled carbon nanotubes (SWCNTs) that recognize the nucleocapsid (N) and spike (S) protein of SARS-CoV-2 using unique three-dimensional (3D) nanosensor interfaces. This results in rapid and label-free nIR fluorescence detection. This antibody-free nanosensor shows up to 50% sensor responses within 5 min of viral protein injections with limit of detection (LOD) values of 48 fM and 350 pM for N and S proteins, respectively. Finally, we demonstrate instrumentation based on a fiber-optic platform that interfaces the advantages of antibody-free molecular recognition and biofluid compatibility in human saliva conditions.

Engineered Aptamer-Organic Amphiphile Self-Assemblies for Biomedical Applications: Progress and Challenges.

Currently, nucleic acid aptamers are exploited as robust targeting ligands in the biomedical field, due to their specific molecular recognition, little immunogenicity, low cost, ect. Thanks to the facile chemical modification and high hydrophilicity, aptamers can be site-specifically linked with hydrophobic moieties to prepare aptamer-organic amphiphiles (AOAs), which spontaneously assemble into aptamer-organic amphiphile self-assemblies (AOASs). These polyvalent self-assemblies feature with enhanced target-binding ability, increased resistance to nuclease, and efficient cargo-loading, making them powerful platforms for bioapplications, including targeted drug delivery, cell-based cancer therapy, biosensing, and bioimaging. Besides, the morphology of AOASs can be elaborately manipulated for smarter biomedical functions, by regulating the hydrophilicity/hydrophobicity ratio of AOAs. Benefiting from the boom in DNA synthesis technology and nanotechnology, various types of AOASs, including aptamer-polymer amphiphile self-assemblies, aptamer-lipid amphiphile self-assemblies, aptamer-cell self-assemblies, ect, have been constructed with great biomedical potential. Particularly, stimuli-responsive AOASs with transformable structure can realize site-specific drug release, enhanced tumor penetration, and specific target molecule detection. Herein, the general synthesis methods of oligonucleotide-organic amphiphiles are firstly summarized. Then recent progress in different types of AOASs for bioapplications and strategies for morphology control are systematically reviewed. The present challenges and future perspectives of this field are also discussed.

Cucurbituril-mediated AIE: An unconventional indicator displacement assay for ketamine detection

Typical AIE luminogens with extensive π-electron conjugation are limited in use on account of their complex synthesis, high cost and environmental concerns. To this end, we report here a novel host-guest inclusion complex that is assembled from nonemissive ligands, and surprisingly exhibits notable AIE features in aqueous solution while maintaining good sensitivity for ketamine (KET) detection. Isothermal titration studies confirm that palmatine (PAL) binds to cucurbit[8]uril (Q8) in a 2:1 ratio with an equilibrium association constant of 1.75 × 1011 M−2, suggesting that the unconventional AIE effects can be attributed to the stacking of two PAL moieties inside a single Q8 cavity. Geometric constraints of the macrocycle result in dimeric coupling of PAL in the ground state with significant bathochromic shifts in absorption and emission, which can be readily excited to exhibit enhanced photoluminescence. The unusual upfield perturbation and broadening of Q8 signals in the 1H NMR spectrum upon binding with PAL convey decisive information that Q8 not only serves as a molecular container, but also participates in the electron delocalization during the AIE events. Upon addition of KET, fluorescence was switched off through guest exchange to generate KET@Q8 as well as free PAL. The significant AIE characteristics of 2*PAL@Q8 in combination with its specific molecular recognition towards KET gives rise to 5.0 ng/mL limit of detection with linear range from 16.8 to 500 ng/mL, and a pronounced selectivity over possible interfering substances in biological matrices. We demonstrate the first example of Q8-mediated AIE effects, where the photoluminescence of virtually nonemissive or feebly emissive ligands is remarkably intensified through clustering inside a macrocyclic host molecule, therefore offering great promise for further development into dedicated AIE-based sensors.

Cell membrane coating integrity affects the internalization mechanism of biomimetic nanoparticles

Cell membrane coated nanoparticles (NPs) have recently been recognized as attractive nanomedical tools because of their unique properties such as immune escape, long blood circulation time, specific molecular recognition and cell targeting. However, the integrity of the cell membrane coating on NPs, a key metrics related to the quality of these biomimetic-systems and their resulting biomedical function, has remained largely unexplored. Here, we report a fluorescence quenching assay to probe the integrity of cell membrane coating. In contradiction to the common assumption of perfect coating, we uncover that up to 90% of the biomimetic NPs are only partially coated. Using in vitro homologous targeting studies, we demonstrate that partially coated NPs could still be internalized by the target cells. By combining molecular simulations with experimental analysis, we further identify an endocytic entry mechanism for these NPs. We unravel that NPs with a high coating degree (≥50%) enter the cells individually, whereas the NPs with a low coating degree (<50%) need to aggregate together before internalization. This quantitative method and the fundamental understanding of how cell membrane coated NPs enter the cells will enhance the rational designing of biomimetic nanosystems and pave the way for more effective cancer nanomedicine.

New Structure Mass Tag based on Zr-NMOF for Multiparameter and Sensitive Single-Cell Interrogating in Mass Cytometry.

Mass cytometry, also called cytometry by time-of-flight (CyTOF), is an emerging powerful proteomic analysis technique that utilizes metal chelated polymer (MCP) as mass tags for interrogating high-dimensional biomarkers simultaneously on millions of individual cells. However, under the typical polymer-based mass tag system, the sensitivity and multiplexing detection ability has been highly restricted. Herein, a new structure mass tag based on a nanometal organic framework (NMOF) is reported for multiparameter and sensitive single-cell biomarker interrogating in CyTOF. A uniform-sized Zr-NMOF (33 nm)carrying 105 metal ions is synthesized under modulator/reaction time coregulation, which is monodispersed and colloidally stable in water for over one-year storage. On functionalization with an antibody, the Zr mass tag exhibits specific molecular recognition properties and minimal cross-reaction toward nontargeted cells. In addition, the Zr-mass tag is compatible with MCP mass tags in a multiparameter assay for mouse spleen cells staining, which exploits four additional channels, m/z= 90, 91, 92, 94, for single-cell immunoassays in CyTOF. Compared to the MCP mass tag, the Zr-mass tag provides an additional fivefold signal amplification. This work provides the fundamental technical capability for exploiting NMOF-based mass tags for CyTOF application, which opens up possibility of high-dimensional single-cell immune profiling, low abundant antigen detection, and development of new barcoding systems.

Externally Regulated Specific Molecular Recognition Driven Pathway Selectivity in Supramolecular Polymerization.

This article reveals 4-dimethylaminopyridine (DMAP) regulated pathway selectivity in the supramolecular polymerization of a naphthalene-diimide derivative (NDI-1), appended with a carboxylic acid group. In decane, NDI-1 produces ill-defined aggregate (Agg-1) due to different H-bonding motifs of the -COOH group. With one mole equivalent DMAP, the NDI-1/DMAP complex introduces new nucleation condition and exhibits a cooperative supramolecular polymerization producing J-aggregated fibrillar nanostructure (Agg-2). With 10 % DMAP and fast cooling (10 K/min), similar nucleation and open chain H-bonding with the free monomer in an anti-parallel arrangement produces identical J-aggregate (Agg-2a). With 2.5 % DMAP and slow cooling (1 K/min), a distinct nucleation and supramolecular polymerization pathway emerge leading to the thermodynamically controlled Agg-3 with face-to-face stacking and 2D-morphology. Slow cooling with 5-10 % DMAP produces a mixture of Agg-2a and Agg-3. Computational modelling studies provide valuable insights into the internal order and the pathway complexity.

Molecularly Imprinted Silver Nanocomposites for Explosive Taggant Sensing

Sensing explosive taggants such as 3-nitrotoluene (3-NT) and 2,3-dimethyl-2,3-dinitrobutane has become a strategic priority in homeland security. This work reports the synthesis of a solid-state plasmonic sensor based on a nanocomposite of Ag nanoparticles (NPs) embedded in a molecularly imprinted polymer (MIP) for selective detection of 3-NT, an explosive taggant for 2,4,6-trinitrotoluene. In our approach, the in situ synthesis of Ag NPs and the molecular imprinting with 3-NT as a template take place simultaneously inside the polyethyleneimine (PEI) thin film during the baking step after spin coating. The MIP sensor fabrication is done by a low-cost, fast, and scalable one-step procedure. We demonstrate the chemosensing capabilities of Ag-PEI MIP nanocomposites to 3-NT using the localized surface plasmon resonance band intensity decay as a sensing parameter. The molecular imprinting approach results in an enhancement of specific sensor response to 3-NT, with a limit of detection of 54.8 ng for 3-NT and a sensitivity of 24.0% ± 3.0%. We tested the MIP sensor specificity by comparing the sensor response to several NO2-containing molecules. The Ag-PEI MIP sensor demonstrated a robust, specific molecular recognition toward 3-NT. Because the MIP nanocomposite sensor is easy to prepare, easy to use, and inexpensive, these plasmonic sensors can be easily implemented with portable reading platforms into remote explosive detection and bomb disposal robots.

Molecular Recognition Driven Bioinspired Directional Supramolecular Assembly of Amphiphilic (Macro)molecules and Proteins.

Bioinspired self-assembly has been explored with diverse synthetic scaffolds, among which amphiphiles are perhaps the most extensively studied systems. Classical surfactants or amphiphilic block copolymers, depending on the hydrophobic-hydrophilic balance, produce distinct nanostructures, which hold promise for applications ranging from biology to materials sciences. Nevertheless, their immiscibility-driven aggregation does not provide the opportunity to precisely regulate the internal order, morphology, or functional group display, which is highly desirable, especially in the context of biological applications.A new class of amphiphiles have emerged in the recent past in which the hydrophilic segment(s) is appended with a hydrophobic supramolecular-structure-directing-unit (SSDU), consisting of a π-conjugated chromophore and a H-bonding group. Self-recognition of the SSDU by attractive directional interactions governs the supramolecular assembly, which is fundamentally different than the repulsive solvent-immiscibility driven aggregation of traditional amphiphiles. Such SSDU-appended hydrophilic polymers exhibit entropy-driven highly stable self-assembly producing distinct nanostructures depending on the H-bonding functional group. For example, polymers with the hydrazide-functionalized SSDU attached form a polymersome, while in a sharp contrast, the same polymers when connected to an amide containing SSDU produce a cylindrical micelle via a spherical-micelle intermediate. This relationship holds true for a series of SSDU-attached hydrophilic polymers irrespective of the hydrophobic/hydrophilic balance or chemical structure, indicating that the supramolecular-assembly is primarily controlled by the specific molecular-recognition motif of the SSDU, instead of the packing parameter-based norms. Beyond synthetic polymers, SSDU-attached proteins also exhibit similar molecular-recognition driven self-assembly as well as coassembly with SSDU-attached polymers or hydrophilic wedges, producing multi-stimuli-responsive nanostructures in which the protein gains remarkable protection from thermal denaturation or enzymatic hydrolysis and exhibits redox-responsive enzymatic activity.Furthermore, SSDU-derived bola-shape π-amphiphiles have been recognized as a useful scaffold for the synthesis of unsymmetric polymersomes, rarely reported in the literature. The building block consists of a hydrophobic naphthalene-diimide (NDI) π-system attached to a hydrophilic functional group (ionic or nonionic) and a nonionic wedge on its two opposite arms. Extended H-bonding among the hydrazide groups, placed only on one side of the central chromophore by design, ensures stacking of the NDIs with parallel orientation and induces a preferred direction of curvature so that the H-bonded chain and consequently the functional groups attached to the same side remain at the inner-wall of the supramolecular polymersome. Automatically, the functional groups, located on the other side, are displayed at the outer surface. This design works for different amphiphiles, which by virtue of efficient and predictable functional group display, strongly influences the multivalent binding with different biological targets resulting in efficient enzyme inhibition, glycocluster effect, or antibacterial activity, depending on the nature of the functional group. By taking advantage of the electron accepting nature of the NDI, electron rich pyrene-containing amphiphiles can be costacked in alternating sequence, producing temperature and redox-responsive supramolecular polymers with NDI/pyrene stoichiometry-dependent morphology, lower critical solution temperature (LCST), functional group display, and antibacterial activity.

Structural recognition of the MYC promoter G-quadruplex by a quinoline derivative: insights into molecular targeting of parallel G-quadruplexes.

DNA G-Quadruplexes (G4s) formed in oncogene promoters regulate transcription. The oncogene MYC promoter G4 (MycG4) is the most prevalent G4 in human cancers. However, the most studied MycG4 sequence bears a mutated 3′-residue crucial for ligand recognition. Here, we report a new drug-like small molecule PEQ without a large aromatic moiety that specifically binds MycG4. We determined the NMR solution structures of the wild-type MycG4 and its 2:1 PEQ complex, as well as the structure of the 2:1 PEQ complex of the widely used mutant MycG4. Comparison of the two complex structures demonstrates specific molecular recognition of MycG4 and shows the clear effect of the critical 3′-mutation on the drug binding interface. We performed a systematic analysis of the four available complex structures involving the same mutant MycG4, which can be considered a model system for parallel G4s, and revealed for the first time that the flexible flanking residues are recruited in a conserved and sequence-specific way, as well as unused potential for selective ligand-G4 hydrogen-bond interactions. Our results provide the true molecular basis for MycG4-targeting drugs and new critical insights into future rational design of drugs targeting MycG4 and parallel G4s that are prevalent in promoter and RNA G4s.

Nanoarchitectonics for Analytical Science at Interfaces and with Supramolecular Nanostructures.

For materials development with high-level structural regulations, the emerging concept of nanoarchitectonics has been proposed. Analytical sciences, including sensing/detection, sensors, and related device construction, are active targets of the nanoarchitectonics approach. This review article focuses on the two features of interface and nanostructures are especially focused to discuss nanoarchitectonics for analytical science. Especially, two selected topics, (i) analyses on molecular sensing at interfaces and (ii) sensors using self-assembled supramolecular nanostructures, are exemplified in this review article. In addition to recent general examples, specific molecular recognition at the air-water interface and fabrication of sensing materials upon self-assembly of fullerene units are discussed. Descriptions of these examples indicate that nanoarchitectonics and analytical science share common benefits, and therefore, developments in both research fields should lead to synergies.

Ultrahigh molecular recognition specificity of competing DNA oligonucleotide strands in thermal equilibrium: a cooperative transition to order

The specificity of molecular recognition is important for molecular self-organization. A prominent example is the biological cell where a myriad of different molecular receptor pairs recognize their binding partners with astonishing accuracy within a highly crowded molecular environment. In thermal equilibrium it is usually admitted that the affinity of recognizer pairs only depends on the nature of the two binding molecules. Accordingly, Boltzmann factors of binding energy differences relate the molecular affinities among different target molecules that compete for the same probe. Here, we consider the molecular recognition of short DNA oligonucleotide single strands. We show that a better matching oligonucleotide can prevail against a disproportionally more concentrated competitor with reduced affinity due to a mismatch. We investigate the situation using fluorescence-based techniques, among them Förster resonance energy transfer and total internal reflection fluorescence excitation. We find that the affinity of certain strands appears considerably reduced only as long as a better matching competitor is present. Compared to the simple Boltzmann picture above we observe increased specificity, up to several orders of magnitude. We interpret our observations based on an energy-barrier of entropic origin that occurs if two competing oligonucleotide strands occupy the same probe simultaneously. Due to their differences in binding microstate distributions, the barrier affects the binding affinities of the competitors differently. Based on a mean field description, we derive a resulting expression for the free energy landscape, a formal analogue to a Landau description of phase transitions reproducing the observations in quantitative agreement as a result of a cooperative transition. The advantage of improved molecular recognition comes at no energetic cost other than the design of the molecular ensemble and the presence of the competitor. As a possible application, binding assays for the detection of single nucleotide polymorphisms in DNA strands could be improved by adding competing strands. It will be interesting to see if mechanisms along similar lines as exposed here contribute to the molecular synergy that occurs in biological systems.

Selective solid-phase extraction of four phenylarsonic compounds from feeds, edible chicken and pork with tailoring imprinted polymer

The novel molecularly imprinted microspheres for four phenylarsonic compounds have been firstly prepared with the reversible addition-fragmentation chain transfer polymerization in a suspension system. The resulting polymeric microspheres were characterized by infrared spectrum, scanning electron microscope and differential scanning calorimetry. With serial adsorption experiments, the polymeric microspheres showed highly specific molecular recognition, fast mass transfer rate and robust adsorption of the substrates. Then, the imprinted polymer was used as the solid-phase extraction adsorbent to extract the phenylarsonic compounds from the feeds, edible chicken and pork. The cartridge was washed with 2 mL ethyl acetate and eluted with 3 mL of methanol- acetic acid (90:10, v/v). The recoveries of the molecularly imprinted solid-phase extraction (MISPE) column ranged from 83.4% to 95.1%. This work provided a versatile approach for the specific extraction of the organoarsenic compounds from complicated matrices and exhibited a bright future for the application of MISPE column.

Cavitandos naturales y de síntesis: desafíos y respuestas en química y tecnología farmacéutica

Supramolecular chemistry involves non-covalent interactions and specific molecular recognition of molecules/analytes by host molecules or supramolecules. These events are present in synthesis, catalysis, chiral separations, design of sensors, cell signaling processes and drug transport by carriers. The typical behavior of supramolecules is derived from their ability to build well-structured self-assembled and self-organized entities. Cavitands are a particular group of supramolecules possessing a cavity able to include a variety of compounds thanks to host-guest non-covalent interactions developed among cavitands and analytes. Some typical cavitands are crown ethers, calixarenes, cucurbiturils, porphyrins and cyclodextrins. The two latter families are natural product cavitands that are generally considered models for molecular recognition of cations and organic and inorganic guest molecules, being attractive host molecules from the sustainability point of view. The natural cyclodextrins (𝛼-, 𝛽- and 𝛾-CD) are obtained with reasonable cost by enzymatic treatment of starch under adequate temperature conditions. They are profusely used in pharmaceutical, food and cosmetic industries due to their very low toxicity and side effects. This review is focused on the relevance and applications of cyclodextrins in pharmaceutical technology for their ability to increase solubility and stabilize drug molecules, thereby enhancing their bioavailability. The association of cyclodextrins with diverse nanostructured materials, i.e. carbon nanotubes, magnetic nanoparticles, silica and molecularly imprinted polymers, allows to synergize the properties of cyclodextrins and these nanostructured materials to reach highly specific molecular recognition of analytes. The exploitation of these benefits for analytical sample pre-treatment and chiral chromatographic separations are described. The use of cyclodextrins as mobile phases additives in HPLC provides interesting results for green and sustainable chromatographic separations. Polymers incorporating cyclodextrins show exceptional adsorption properties for retaining toxic compounds and persistent organic pollutants from soils and water samples, allowing satisfactory recoveries of these environmental samples according to the Stockholm convection principles.

Comparison and recent progress of molecular imprinting technology and dummy template molecular imprinting technology.

Molecular imprinting technology for the preparation of polymers with specific molecular recognition function had become one of the current research hotspots. It has been widely applied in chromatographic separation, antibody and receptor mimetics, solid-phase extraction, bio-sensors, and other fields in the last decades. In this study, molecular imprinting technology was summarized from the points of templates and dummy templates, and four typical target analytes were selected to compare the differences between templates and dummy templates. The current status and prospects of molecular imprinting technology were also proposed.

Orientation of the α-CD component of [2]rotaxanes affects their specific molecular recognition behaviour

An α-CD component enhanced the anion recognition ability of the urea moiety and the deprotonation of the phenol moiety in the axle component in orientationally isomeric [2]rotaxanes with the OH groups on the wide rim of the α-CD, respectively.

Cochineal quinone carbon dot synthesis via a keto–enol tautomerism strategy and their intermolecular photo-induced cross-redox interactions with tetracycline

Specific molecular recognition of tetracycline by carminic acid-formed carbon dots taking advantage of the common quinone molecular structural unit.

Determination of sulfonamide antibiotics in fish and shrimp samples based on magnetic carbon nanotube dummy molecularly imprinted polymer extraction followed by UPLC-MS/MS.

In this study, a novel purification method using magnetic solid-phase extraction (MSPE) based on magnetic carbon nanotube dummy molecularly imprinted polymer (MCNTMIP) nanocomposite was investigated for separation and enrichment of sulfonamide antibiotics (SAs) in fish and shrimp samples. The MCNTMIP nanocomposite was successfully synthesized by applying carbon nanotubes as supporting template, methacrylic acid as functional monomer, sulfabenzamide as the dummy template for SAs, and ethylene glycol dimethacrylate as crosslinking agent, then was characterized by Fourier-transform infrared spectrometry and vibrating sample magnetometry. The adsorption performance of MCNTMIP was evaluated by binding experiments, including static adsorption, kinetic adsorption, and selectivity recognition study. The results confirmed that an imprinted polymer layer was successfully constructed on the surface of the MCNTMIP and this sorbent has advantages of simple magnetic separation, specific molecular recognition, and high adsorption capacity. Combined with ultra-high performance liquid chromatography tandem mass spectrometry (UPLC-MS/MS), we developed a rapid, sensitive, efficient MSPE method for detecting SAs analytes. Under the optimal conditions, the limits of detection were low to 0.1μg/kg, and the recoveries of SAs analytes were ranged between 90.2 and 99.9%. In addition, the precision values were ranged between 0.5 and 9.1%. This method was successfully applied to analyze SAs in fish and shrimp samples with satisfactory recoveries.

Phototriggered Supramolecular Assembly.

Most of the supramolecular structures lack accuracy at the macroscopic scale because of their spontaneous uncontrolled self-assembly. Although significant progress has been made in understanding the pros and cons of various directional noncovalent interactions and their specific molecular recognition ability, it is only in the recent past that the focus has been shifted toward controlling the dimension, dispersity, and other macroscopic properties of supramolecular assemblies. In this context, recent examples encompass various external stimuli to gain the structural precision in supramolecular assembly, among which light-triggered supramolecular assembly has gained significant interest as it is reagent free and endows the possibility of the controlled synthesis of supramolecular assemblies via manipulation of the light energy, irradiation time, or spatial control. This mini-review highlights representative recent examples of phototriggered supramolecular assemblies (from the monomer or another type of assembly) by removal of a photolabile protecting group, photoisomerization, or other methods of photoactivation of a dormant building block.

Molecularly-porous ultrathin membranes for highly selective organic solvent nanofiltration

Engineering membranes for molecular separation in organic solvents is still a big challenge. When the selectivity increases, the permeability tends to drastically decrease, increasing the energy demands for the separation process. Ideally, organic solvent nanofiltration membranes should be thin to enhance the permeant transport, have a well-tailored nanoporosity and high stability in harsh solvents. Here, we introduce a trianglamine macrocycle as a molecular building block for cross-linked membranes, prepared by facile interfacial polymerization, for high-performance selective separations. The membranes were prepared via a two-in-one strategy, enabled by the amine macrocycle, by simultaneously reducing the thickness of the thin-film layers (<10 nm) and introducing permanent intrinsic porosity within the membrane (6.3 Å). This translates into a superior separation performance for nanofiltration operation, both in polar and apolar solvents. The hyper-cross-linked network significantly improved the stability in various organic solvents, while the amine host macrocycle provided specific size and charge molecular recognition for selective guest molecules separation. By employing easily customized molecular hosts in ultrathin membranes, we can significantly tailor the selectivity on-demand without compromising the overall permeability of the system.