Specific Properties Research Articles

Analysis of the Rigid Foldability of Origami Patterns Based on Spatial Positions of Creases

Abstract Rigid foldability is a special property of rigid origami patterns, where each origami plane remains undeformed during continuous movement along the predetermined crease. Current research on the rigid foldability of origami patterns mainly focuses on kinematics, while less attention is paid to factors that cause deformation of the folding plane. Whether the relative spatial position of adjacent creases has been changed is a critical factor that influences the state (rigid or deformed) of the folding plane between the two adjacent creases during the folding process. This study considered two factors (linear relationship and Euclidean distance) to measure the changes in the spatial positions of creases, explored the relationship between the two factors and rigid folding, and identified deformation forms that affect rigid foldability. First, the origami pattern was regarded as a linkage mechanism, and the linear relationship between creases was determined from the single-vertex origami unit forming this origami structure. Then, the geometric parameters of the origami pattern were used to calculate the Euclidean distance between two points on adjacent creases during the folding process. If the linear relationship and Euclidean distance always remain the same, the origami pattern has rigid foldability. Based on changes in the Euclidean distance, this method can also help determine the main deformation of non-rigidly foldable origami patterns. In addition, it can be applied to origami patterns with four or five vertices and multiple loops, and it further provides a novel approach for determining the layout of the crease position and the judgment of rigid foldability during origami-inspired mechanism design.

Chitosan: A Versatile Biomaterial Revolutionizing Endodontic Therapy.

Owing to their nanoscale dimensions, nanomaterials have special chemical and physical properties that set them apart from their bulk counterparts. The exterior dimensions of a minimum of half of the particles span several nanometers in their size distribution. Silver nanoparticles (AgNPs) are one type of nanomaterial that has been widely used because of their strong antibacterial properties, which can kill bacteria that are resistant to many drugs. Due to its potential for regulated release, localized retention, and safeguarding the active ingredients against environmental or enzymatic deterioration, nanoparticle technology has also emerged as a promising medication delivery method. The techniques for creating nanoparticles can be easily scaled up and used for a wide variety of medications. Since polymeric nanoparticles are biodegradable, biocompatible, and have more readily available formulation techniques than other nanoparticle drug delivery approaches, their range of applications has been expanding. Chitosan, also known as deacetylated polysaccharide, is a straight-chain cationic polymer that is typically a cationic copolymer. It can be generated naturally or by deacetylating chitin. Consequently, it contains an extensive array of biomedical applications, such as efficient healing of wounds, regeneration of tissues, regeneration of bone, and anti-infection. Because of its functional diversity, accessibility, and being both biodegradable and biocompatible, it has a wide spectrum of uses in dentistry. Recent research on chitosan-based nanoparticles is founded on the field's growing comprehension of the characteristics of chitosan and techniques for chemical or physical modification that are used to optimize the drug loading and release characteristics of the nanoparticles.

ANALYSIS OF THE APPLICATION OF MODERN HERMETIC TECHNIQUES OF POLYMER MATERIALS IN HYDRAULIC MACHINES

The application of modern hermetic techniques in polymer materials for hydraulic machines is a significant advance in engineering design and manufacturing. This analysis examines the implications and benefits of using these techniques in hydraulic systems. By using polymeric materials and hermetic sealing solutions with special properties, hydraulic machines can achieve better efficiency, durability and durability. The selection of suitable polymer materials such as polytetrafluoroethylene (PTFE) and the use of advanced manufacturing processes such as injection molding enable the production of precision seals and components with increased wear and corrosion resistance. In addition, the lightweight structure of polymer materials helps reduce weight and cost while maintaining performance standards. Customization options provided by hermetic methods enable optimization of material usage and creation of custom solutions for various hydraulic applications. In addition, the environmental impact is reduced by using recyclable and biodegradable polymers. However, issues such as material compatibility and long-term performance under extreme conditions require extensive testing and verification. Overall, the application of modern hermetic techniques to polymeric materials provides a promising way to improve hydraulic machine performance, reduce costs, and promote environmental sustainability in engineering applications. The integration of modern hermetic technology into polymer materials has revolutionized the design and functionality of hydraulic machines. Keywords: hermetic techniques, hydration system, polymer materials, hydraulic machine, durability.

Lattice-Disordered High-Entropy Alloy Engineered by Thermal Dezincification for Improved Catalytic Hydrogen Evolution Reaction.

A disordered crystal structure is an asymmetrical atomic lattice resulting from the missing atoms (vacancies) or the lattice misarrangement in a solid-state material. It has been widely proven to improve the electrocatalytic hydrogen evolution reaction (HER) process. In the present work, due to the special physical properties (the low evaporation temperature of below 900 °C), Zn is utilized as a sacrificial component to create senary PtIrNiCoFeZn high-entropy alloy (HEA) with highly disordered lattices. The structure of the lattice-disordered PtIrNiCoFeZn HEA is characterized by the thermal diffusion scattering (TDS) in transmission electron microscope. Density functional theory calculations reveal that lattice disorder not only accelerates both the Volmer step and Tafel step during the HER process but also optimizes the intensity and distribution of projected density of states near the Fermi energy after the H2O and H adsorption. Anomalously high alkaline HER activity and stability are proven by experimental measurements. This work introduces a novel approach to preparing irregular lattices offering highly efficient HEA and a TDS characterization method to reveal the disordered lattice in materials. It provides a new route toward exploring and developing the catalytic activities of materials with asymmetrically disordered lattices.

Adaptive parameter selection for kernel ridge regression

This paper focuses on parameter selection issues of kernel ridge regression (KRR). Due to special spectral properties of KRR, we find that delicate subdivision of the parameter interval shrinks the difference between two successive KRR estimates. Based on this observation, we develop an early-stopping type parameter selection strategy for KRR according to the so-called Lepskii-type principle. Theoretical verifications are presented in the framework of learning theory to show that KRR equipped with the proposed parameter selection strategy succeeds in achieving optimal learning rates and adapts to different norms, providing a new record of parameter selection for kernel methods.

On Robustness for the Skolem, Positivity and Ultimate Positivity Problems

The Skolem problem is a long-standing open problem in linear dynamical systems: can a linear recurrence sequence (LRS) ever reach 0 from a given initial configuration? Similarly, the positivity problem asks whether the LRS stays positive from an initial configuration. Deciding Skolem (or positivity) has been open for half a century: the best known decidability results are for LRS with special properties (e.g., low order recurrences). But these problems are easier for "uninitialized" variants, where the initial configuration is not fixed but can vary arbitrarily: checking if there is an initial configuration from which the LRS stays positive can be decided in polynomial time (Tiwari in 2004, Braverman in 2006). In this paper, we consider problems that lie between the initialized and uninitialized variants. More precisely, we ask if 0 (resp. negative numbers) can be avoided from every initial configuration in a neighborhood of a given initial configuration. This can be considered as a robust variant of the Skolem (resp. positivity) problem. We show that these problems lie at the frontier of decidability: if the neighbourhood is given as part of the input, then robust Skolem and robust positivity are Diophantine hard, i.e., solving either would entail major breakthroughs in Diophantine approximations, as happens for (non-robust) positivity. However, if one asks whether such a neighbourhood exists, then the problems turn out to be decidable with PSPACE complexity. Our techniques also allow us to tackle robustness for ultimate positivity, which asks whether there is a bound on the number of steps after which the LRS remains positive. There are two variants depending on whether we ask for a "uniform" bound on this number of steps. For the non-uniform variant, when the neighbourhood is open, the problem turns out to be tractable, even when the neighbourhood is given as input.

Optimum Design of Coaxial Hydraulic Sealing Systems Made from Polytetrafluoroethylene and Its Compounds

Fluidic actuation systems are optimizable as to energy consumption by reducing the friction in the hydraulic cylinders. Polymeric materials with special antifriction properties and good resistance to hydraulic fluids can be deployed to enhance the performance of hydraulic cylinders. Small friction forces can also be ensured by facilitating the hydrodynamic separation of the elements of the friction tribosystem, namely the seal and sealed-off surface, respectively. The study presented in this paper analyzed the hydrodynamic separation phenomenon in hydraulic cylinders with coaxial sealing systems of the pistons. The process underlying the forming of the fluid film between the seal and its contact surface was considered and the formula for calculating film thickness was deduced. This paper presents graphs that describe the variation of the fluid film thickness versus the dimensional and material characteristics of the sealing systems. The study yielded recommendations as to the most adequate polymeric material to be used and the optimum dimensional characteristics of the seal.

Rock fragmentation mechanism of PDC cutter from the insight of cutting chips

To meet the global energy needs and demands, obtaining oil and gas resources from deep strata plays an increasingly important role in energy supply. However, it is difficult to drill since the special properties of rocks in deep formation. To further improve the breaking efficiency of polycrystalline diamond compact (PDC) bit in deep hard rock, this paper conducted several groups of experiments on cutting granite with PDC cutters. By changing the cutting depth, rake angle and linear velocity, the relationship between the mass proportion, fractal dimension and roughness index of cuttings and the mechanical specific energy (MSE) is explored, and the following conclusions are obtained: When cutting depth HC exceeds 0.8 mm, massive chips with particle size r > 2 mm begin to form and the brittle failure begins to occur, and the probability of brittle failure will increase with the further increase of cutting depth. With the increase of rake angle, more energy will be used to form new surfaces of cutting chips, resulting in a decrease in the roughness index and an increase in MSE. More massive chips will be formed with the increasing linear velocity, but MSE only decrease slightly. The variation of the fractal MSE (FMSE) that based on the fractal dimension of cutting chips is extremely consistent with the MSE. The relevant conclusions in this paper can provide some reference for the structural design of PDC bit, so as to improve the drilling efficiency in deep hard rock.

Constructing Two-Dimensional (2D) Heterostructure Channels with Engineered Biomembrane and Graphene for Precise Scandium Sieving.

The special properties of rare earth elements (REE) have effectively broadened their application fields. How to accurately recognize and efficiently separate target rare earth ions with similar radii and chemical properties remains a formidable challenge. Here, precise two-dimensional (2D) heterogeneous channels are constructed using engineered E. coli membranes between graphene oxide (GO) layers. The difference in binding ability and corresponding conformational change between Lanmodulin (LanM) and rare earth ions in the heterogeneous channel allows for precisely recognizing and sieving of scandium ions (Sc3+). The engineered E. coli membranes not only can protect the integrity of structure and functionality of LanM, the rich lipids and sugars, but also help the Escherichia coli (E. coli) membranes closely tile on the GO nanosheets through interaction, preventing swelling and controlling interlayer spacing accurately down to the sub-nanometer. Apparently, the 2D heterogeneous channels showcase excellent selectivity for trivalent ions (SFFe /Sc≈3), especially for Sc3+ ions in REE with high selectivity (SFCe/Sc≈167, SFLa/Sc≈103). The long-term stability and tensile strain tests verify the membrane's outstanding stability. Thus, this simple, efficient, and cost-effective work provides a suggestion for constructing 2D interlayer heterogeneous channels for precise sieving, and this valuable strategy is proposed for the efficient extraction of Sc.

Recent progress of molybdenum disulfide/carbon composites for electrochemical hydrogen evolution reaction

As a star two-dimensional material, molybdenum disulfide (MoS2) shows a good potential in the field of electrochemical hydrogen evolution reaction (HER) due to its low price, special physicochemical properties and a small theoretical Gibbs free energy of hydrogen adsorption. However, some disadvantages such as poor electroconductivity and inert basal planes hinder its further improvement of HER activity. Therefore, adopting carbon materials with good electrical conductivity and large specific surface area to composite with MoS2 is one of the popular strategies to improve the electrical conductivity and increase the exposure of catalytically active sites for constructing highly efficient MoS2-based electrocatalysts. Herein, in this review, we firstly gave a brief introduction of the MoS2 structure and the basic HER principle. Then, the synthesis method, catalytic performance and reaction mechanism of utilizing different carbon materials to improve the HER activity of MoS2 were summarized in detail. Finally, the existing problems and future opportunities for preparing highly active and low cost electrocatalysts assisted by carbon materials are prospected.

The synthesis of Fe3O4@SiO2 superparamagnetic materials and mechanism of catalysis

Abstract The superparamagnetic Fe3O4 was fabricated by the solvothermal synthesis, in which medium ferric chloride is the iron source and deoxidizer using as ethylene glycol. The core-shell material Fe3O4@SiO2 was fabricated by the scheme which was composed of Anhydrous ethanol, deionized water, ammonia water, and tetraethyl orthosilicate (TEOS). The structural and optical characteristics of the samples Fe3O4 and core-shell Fe3O4@SiO2 was detected by X-ray diffraction (XRD), transmission electron microscope (TEM), Vibrating sample magnetometer (VSM), and UV/VIS/IR spectrophotometer. The conclusions illustrate that the spherical core-shell structure of Fe3O4 and Fe3O4@SiO2 were fabricated with superparamagnetic. The Ostwald ripening effect on structure of sample Fe3O4 was concluded to form inverse spinel polycrystal structure by nanometer particles. The visual-driven photocatalytic properties of Fe3O4 and Fe3O4@SiO2 nanoparticles toward the deposition of methodology blue was studied. The obtained conclusions indicate that Fe3O4@SiO2 after irradiated by visible light, its degradation rate of methodology methylene mlue (MB) was enhanced than Fe3O4 in the presence of H2O2. The samples Fe3O4 and core-shell Fe3O4@SiO2 materials are recycled by external magnetic field and reused for special superparamagnetic property. The sample Fe3O4 and core-shell Fe3O4@SiO2 materials represent higher catalytic property and excellent fixity consistent with the decomposition rate of methodology methylene mlue (MB) after being recycling and reuse severe times. The photocatalytic mechanism was dismissed based on the determined active agent during the process of degraded wastewater.

Inhomogeneous Au2S for Photoacoustic Imaging and Photodynamic Tumor Therapy Based on Different Forms of Energy Dissipation.

Nanomaterials with unique structures and components play a crucial role in nanomedicine. In this study, we discovered that the inhomogeneous Au2S constructed by cation exchange and acid etching could dissipate energy in different forms after absorbing multichromatic light, which could be used to achieve the integrated diagnosis and treatment of tumors, respectively. Folic acid modified Au2S ringed nanoparticles (FA-Au2S RNs) with an assembly-like structure were demonstrated to result in better PA imaging performance and generate more reactive oxygen species (O2·-, ·OH, and 1O2) than folic acid modified Au2S triangular nanoparticles (FA-Au2S TNs). Finite element analyses determined the reason for the high absorbance properties and synergistic enhancement of plasma resonance in the assembly-like structure of Au2S RNs. Both FA-Au2S nanostructures were modified with folic acid and injected into 4T1 tumor-bearing mice via the tail vein. The best PA imaging contrast was obtained under 700 nm laser illumination, and the most effective PDT antitumor activity was achieved under 1064 nm laser illumination. The PA average of the tumor in the FA-Au2S RN group was approximately 2 times higher than that of the FA-Au2S TN group at 24 h of injection. The PA imaging results of intratumorally injected FA-Au2S RNs proved that they were still able to show better PA signal enhancement at 24 h postinjection. Our study demonstrates that FA-Au2S nanomaterials with unique structures and special properties can be reliably produced using strictly controlled chemical synthesis. It further provides a strategy for the construction of highly sensitive PA imaging platforms and efficient PDT antitumor agents that exploit wavelength-dependent energy dissipation mechanisms.

Efficient synthesis of benzyl-protected cyclic lysine on Pt/m-Al2O3 catalysts and its application in functional nylon-6 copolymers production

Functional nylon-6 polymers, particularly those with special properties such as antibacterial, flame retardant, and specialized thermal properties, have a wide range of applications. However, the efficient synthesis of these polymer monomers has long remained a challenge. Benzyl-protected cyclic lysine (BCL) is a potentially functional monomer, and this article proposes an efficient method for the synthesis of benzyl-protected cyclic lysine on a supported platinum catalyst. Compared to existing techniques, this approach offers higher synthesis efficiency and sustainability. Pt/m-Al2O3 (microspherical Al2O3) catalysts were prepared using a vacuum impregnation method and showed good activity and selectivity in the production of benzyl-protected cyclic lysine. The conversion rate of α-amino-ε-caprolactam (α-ACL) was 100%, and the selectivity of BCL was 96.0%. The Pt/m-Al2O3 catalyst maintained good stability over multiple reaction cycles. The reaction mechanism and thermodynamics of functionalized α-ACL were also investigated. The copolymer synthesized with the prepared BCL showed similar structure and thermal stability to pure nylon-6, indicating possible unique functional properties. This study provides a route for the synthesis of cyclic lysine protected with various groups and its potential applications in the field of polymer chemistry.

POE-Based Error Modeling and Multiple Plane Constraint-Based Parameter Identification for the Kinematic Calibration of a 4-UPS/SPR Parallel External Fixator

Limb deformity is a common complaint in orthopedic surgery. Currently, gradual treatment using parallel external fixator (PEF) has become the preferred option for deformity correction. As the key medical apparatus with the special application properties of temporary assembly and direct utilization, the geometric errors generated during the manufacturing and assembly process of the PEF contribute to the post-correction residual and iatrogenic deformities. However, considering the complexity of clinical scenarios, there is a lack of an applicable solution to reduce the effect of the above error source of PEF. To overcome these problems, taking a 4-UPS/SPR PEF as the research object, this paper proposes a novel kinematic calibration method. First, the error model with the features of completeness, continuity, and minimality is first established based on the product of exponentials (POE) formula. Then, the identifiability analysis is conducted to eliminate the redundant error parameters and ensure the stability and accuracy of the iterative calculation in the process of parameter identification. Furthermore, a multiple plane constraint (MPC)-based parameter identification approach is introduced to the calibration task of the PEF to effectively reduce the difficulty of the pose information measurement in the current cost-effective constraint calibration method. Finally, the simulation and prototype experiments validate that the proposed calibration method (i.e., the combination of the POE-based error model and the MPC-based parameter identification approach) can accomplish the calibration tasks in clinical applications and meet the cost-effectiveness and efficiency requirements.

Human amniotic epithelial stem cell is a cell therapy candidate for preventing acute graft-versus-host disease.

Graft-versus-host disease (GVHD), an immunological disorder that arises from donor T cell activation through recognition of host alloantigens, is the major limitation in the application of allogeneic hematopoietic stem cell transplantation (allo-HSCT). Traditional immunosuppressive agents can relieve GVHD, but they induce serious side effects. It is highly required to explore alternative therapeutic strategy. Human amniotic epithelial stem cells (hAESCs) were recently considered as an ideal source for cell therapy with special immune regulatory property. In this study, we evaluated the therapeutic role of hAESCs in the treatment of GVHD, based on our previous developed cGMP-grade hAESCs product. Humanized mouse model of acute GVHD (aGVHD) was established by injection of huPBMCs via the tail vein. For prevention or treatment of aGVHD, hAESCs were injected to the mice on day -1 or on day 7 post-PBMC infusion, respectively. We showed that hAESCs infusion significantly alleviated the disease phenotype, increased the survival rate of aGVHD mice, and ameliorated pathological injuries in aGVHD target organs. We demonstrated that hAESCs directly induced CD4+ T cell polarization, in which Th1 and Th17 subsets were downregulated, and Treg subset was elevated. Correspondingly, the levels of a series of pro-inflammatory cytokines were reduced while the levels of the anti-inflammatory cytokines were upregulated in the presence of hAESCs. We found that hAESCs regulated CD4+ subset polarization in a paracrine mode, in which TGFβ and PGE2 were selectively secreted to mediate Treg elevation and Th1/Th17 inhibition, respectively. In addition, transplanted hAESCs preserved the graft-versus-leukemia (GVL) effect by inhibiting leukemia cell growth. More intriguingly, hAESCs infusion in HSCT patients displayed potential anti-GVHD effect with no safety concerns and confirmed the immunoregulatory mechanisms in the preclinical study. We conclude that hAESCs infusion is a promising therapeutic strategy for post-HSCT GVHD without compromising the GVL effect. The clinical trial was registered at www.clinicaltrials.gov as #NCT03764228.

Advancing Aquatic Food Safety Detection Using Highly Sensitive Graphene Oxide and Reduced Graphene Oxide (GO/r-GO) Fluorescent Sensors

AbstractWith the increasing demand for aquatic products, the requirement for the safety detection of aquatic products is also increasing. In the past decade, graphene oxide (GO) and reduced graphene oxide (r-GO) have become hot topics in many fields due to their special physical and chemical properties. With their excellent conductivity, a variety of electrochemical sensors have been developed in the fields of biology, food and chemistry. However, the unique optical properties of GO/r-GO have not yet been widely utilized. With the deepening of research, the fluorescence quenching performance of GO/r-GO has been proven to have excellent potential for building fluorescent sensors, and GO/r-GO fluorescent sensors have thus become an inevitable trend in sensor development. This review summarizes the main preparation methods of GO/r-GO and the principles of GO/r-GO fluorescent sensors comprehensively. Additionally, recent advances in utilizing GO/r-GO fluorescent sensors to detect aquatic food are discussed, including the application for the detection of harmful chemicals, microorganisms, and endogenous substances in aquatic products, such as pesticides, antibiotics and heavy metals. It is hoped that this review will help accelerate the progress in the field of analysis, and promote the establishment of an aquatic food supervision system.

STUDY OF THE INFLUENCE OF FRIT VISCOSITY ON THE MELTING CHARACTERISTICS OF GLAZES FOR SINGLE-FIRED CERAMIC TILES

The need to expand the assortment of ceramic tiles and ceramic granite by modifying the structure and texture of glass coatings with special properties using the technology of one-time firing, taking into account the aspects of resource and energy saving and environmental friendliness of widely used finishing materials, is analyzed. The need to create new types of ceramic tiles and ceramic granite in domestic production, taking into account the needs of the fuel and energy complex and the domestic raw material base in the event of emergency situations, has been determined. The purpose and tasks of the work are formulated, which determine the need to study the fusible characteristics of glazes and their viscosity for ceramic tiles for one-time firing. The peculiarities of frit compositions are analyzed and the requirements for surface properties are established to ensure a defect-free glaze coating for one-stage firing of ceramic tiles. High-calcium zinc aluminum silicate frits with a short interval of formation of a vitreous coating during single firing with different textures on PJSC «Kharkiv Tile Plant». The change in the characteristics of the change in viscosity and melting point of frit during the formation of glass-crystalline coatings, depending on the chemical composition and phase transformations during heat treatment, was analyzed. It was determined that ensuring crystallization viscosity η = 108,1-8,5 Pa·s in the area of ​​nucleation temperatures 1050-1150 °С for experimental frits indicates intensive formation and growth of crystalline phases and is decisive for ensuring their melting in the range of temperatures 1100 -1200 °С. It was established that the rapid increase in the viscosity of frit determines the rapid change in the characteristic melting curves in a narrow temperature range when ensuring successive stages of softening, forming a sphere, a hemisphere and melting is an indicator of the possibility of using the developed frits by single firing technology. The use of developed frits in single firing technology will significantly increase the competitiveness of domestic ceramic tiles and contribute to the stabilization of the market in the conditions of sustainable development of the country.

Soliton structures for the (3 + 1)-dimensional Painlevé integrable equation in fluid mediums

The (3 + 1)-dimensional Painlevé integrable equation are a class of nonlinear differential equations with special properties, which play an important role in nonlinear science and are of great significance in solving various practical problems, such as many important models in fields such as quantum mechanics, statistical physics, nonlinear optics, and celestial mechanics. In this work, we utilize the Hirota bilinear form and Mathematica software to formally obtain the interaction solution among lump wave, solitary wave and periodic wave, which has not yet appeared in other literature. Additionally, using the (G′/G)\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$(G'/G)$$\\end{document}-expansion method, we provide a rich set of exact solutions for the (3 + 1)-dimensional Painlevé integrable equation, which includes two functions with arbitrary values. This method is the first to be applied to the (3 + 1)-dimensional Painlevé integrable equation. By giving some 3D graphics and density maps, the dynamic properties are analyzed and demonstrated, which is beneficial for promoting understanding and application of the (3 + 1)-dimensional Painlevé integrable equation.

Detection of Ascorbic Acid by Two-Dimensional Conductive Metal-Organic Framework-Based Electrochemical Sensors.

The realization of efficient and accurate detection of biomolecules has become a key scientific issue in the field of life sciences. With the rapid development of nanotechnology, electrochemical sensors constructed from the superior physical and chemical properties of nanomaterials show faster and more accurate detection. Among nanomaterials, two-dimensional conductive MOF (2D cMOF) is considered to be a star material in electrochemical sensors due to its remarkable conductivity, high porosity, and stability. In this paper, a Cu3(HHTP)2/SPE electrochemical sensor for the detection of ascorbic acid (AA) was constructed by modifying 2D cMOF (Cu3(HHTP)2) on the surface of the screen-printed electrode (SPE). The sensor exhibited excellent catalytic activity in the detection of AA, with a lower detection limit of 2.4 μmol/L (S/N = 3) and a wide linear range of 25-1645 μmol/L. This high catalytic activity can be attributed to the abundant catalytic sites in Cu3(HHTP)2 and the rapid electron transfer between Cu+ and Cu2+, which accelerates the oxidation of AA. This work lays a foundation for the subsequent development of MOFs with special electrochemical catalytic properties and the integration of 2D cMOF into intelligent electrical analysis devices.

Super-slippery silicone-based gel coating with a regenerative oil layer for long-term prevention of surface contamination

Polymer-based gel-type coatings, in which oil molecules are absorbed within polymer networks, have drawn attention as functional coatings to address fouling problems. However, surface drought caused by lubricant depletion limits the longevity of conventional gel-type coatings. In this study, a super-slippery long-chain entangled polydimethylsiloxane (LEP) gel that can self-regenerate a low-viscosity oil layer is proposed to enhance its long-term anti-fouling performance in both indoor and marine habitats. The proposed LEP gel coating can effectively prevent contamination from numerous liquids and protect aluminum surfaces from corrosion in seawater. Even when it was incubated with Porphyridium purpureum, marine red algae that readily stick to the surface, no biofilm was formed on the coated samples for 37 weeks. In field tests, no biological adhesion was observed on the coating surface which was applied to port structures and left for two summer months. This enhanced anti-contamination performance is mainly attributed to the dual protective barrier comprising the underlying polymer layer and regenerative oil layer. Due to special property of continuous self-regeneration of oil layer, the proposed LEP gel surface demonstrates much enhanced sustainability, compared to conventional gel-type coatings. Consequently, the long-term anti-contamination performance of the super-slippery LEP gel coating would pave the way for novel approach to its practical applications.