Specific Loop-mediated Isothermal Amplification Primers Research Articles

Rapid and sensitive authentication of Polygonum multiflorum (He-Shou-Wu) of Chinese medicinal crop using specific isothermal nucleic acid amplification

Polygoni Multiflori Radix (PMR) is well-known valuable medicinal crop and has been reported to have many biological functions for medical applications. For preventing the problem of PMR adulteration in the herbal market, in this study, a DNA-based molecular method, loop-mediated isothermal amplification (LAMP), was developed for the authentication of PMR. A set of newly designed LAMP primer was developed based on the internal transcribed spacer (ITS) sequences of ribosomal DNA. The results demonstrated that amplicon of PM genomic DNA was amplified successfully using specific LAMP primers when the sample contained PM genomic DNA. By contrast, the adulterants of PMR did not exhibit DNA amplification when LAMP was performed. Compared with the traditional polymerase chain reaction (PCR), the isothermal DNA amplification by LAMP demonstrated 10-fold higher sensitivity and required half the time of PCR. The PMR samples with 3-times, 6-times repeated processing, autoclave steaming, and γ-ray irradiation were also can be authenticated by LAMP. However, the PMR sample with conventional 9-times repeated processing was not authenticated by LAMP.In conclusion, the specific DNA amplification method for the authentication of PMR presented herein was sensitive, specific, and rapid under isothermal condition. The findings are useful for application of PMR authentication on-site in the herbal market. This also demonstrates the method’s potential application for the authentication of other herbal crops in the future.

Rapid identification of Gekko gecko by loop-mediated isothermal amplification based on 12S rRNA sequence

Gekko gecko (Tokay Gecko) is a valuable traditional Chinese medicine. In this study, the loop-mediated isothermal amplification (LAMP) technique was introduced for visual rapid identification of G. gecko from adulterants. A total of sixty-five 12S rRNA sequences of fourteen species of G. gecko and its adulterants were obtained. The results showed that G. gecko could be identified from its adulterants through BLAST analysis based on 12S rRNA regions. The 12S rRNA sequences of ten batches of G. gecko were conserved. There were only two haplotypes and three variation sites in the available regions for primers design. Six specific LAMP primers were successfully designed online based on 12S rRNA sequences. The visual rapid detection of G. gecko could be achieved with the optimized conditions (64 °C for 1 h and 80 °C for 5 min). And the required minimal template concentration was 5 μg·L⁻¹ while conventional PCR with 0.5 mg·L⁻¹. Consequently, the LAMP method established from this study was rapid, specific, highly sensitive, and simple. It could be applied to detect G. gecko from its adulterants efficiently.

Development and application of a simple, rapid and sensitive method for detecting moderately carbendazim‐resistant isolates in Botrytis cinerea

AbstractSustainable disease management depends on the ability to monitor the development of fungicide resistance in pathogen populations. A point mutation resulting in an alteration (F200Y) at codon 200 of the target protein β‐tubulin leads to a moderate level of resistance to carbendazim in Botrytis cinerea. Although traditional methods remain a cornerstone in detection of fungicide resistance, molecular methods that do not require the isolation of pathogens, can detect the presence of resistance alleles at low frequencies, and require less time and labour than traditional methods. In this study, we present an efficient, rapid, and highly specific method for detecting the moderately carbendazim‐resistant isolates in B. cinerea based on loop‐mediated isothermal amplification (LAMP). By using specific LAMP primers, we detected the resistance‐conferring mutation underlying β‐tubulin F200Y. The concentrations of LAMP components and LAMP parameters were optimised, resulting in reaction temperatures and times of 61–65°C and 45 min, respectively. The feasibility of the LAMP assay was verified by assaying the diseased samples with artificial inoculation in the different hosts. The LAMP assay developed in the current study was specific, stable, repeatable and sensitive, and was successfully applied for detection of moderately carbendazim‐resistant isolates of B. cinerea in plant samples.

An ambient temperature stable and ready-to-use loop-mediated isothermal amplification assay for detection of toxigenic Vibrio cholerae in outbreak settings

Cholera, caused by Vibrio cholerae is a foodborne disease that frequently reported in food and water related outbreak. Rapid diagnosis of cholera infection is important to avoid potential spread of disease. Among available diagnostic platforms, loop-mediated isothermal amplification (LAMP) is regarded as a potential diagnostic tool due to its rapidity, high sensitivity and specificity and independent of sophisticated thermalcycler. However, the current LAMP often requires multiple pipetting steps, hence is susceptible to cross contamination. Besides, the strict requirement of cold-chain during transportation and storage make its application in low resource settings to be inconvenient. To overcome these problems, the present study is aimed to develop an ambient-temperature-stable and ready-to-use LAMP assay for the detection of toxigenic Vibrio cholerae in low resource settings. A set of specific LAMP primers were designed and tested against 155 V. cholerae and non-V. cholerae strains. Analytical specifity showed that the developed LAMP assay detected 100% of pathogenic V. cholerae and did not amplified other tested bacterial strains. Upon testing against stool samples spiked with toxigenic V. cholerae outbreak isolates, the LAMP assay detected all of the spiked samples (n = 76/76, 100%), in contrast to the conventional PCR which amplified 77.6% (n = 59/76) of the tested specimens. In term of sensitivity, the LAMP assay was 100-fold more sensitive as compared to the conventional PCR method, with LOD of 10 fg per μL and 10 CFU per mL. Following lyophilisation with addition of lyoprotectants, the dry-reagent LAMP mix has an estimated shelf-life of 90.75 days at room temperature.

Detection of nucleic acids and elimination of carryover contamination by using loop-mediated isothermal amplification and antarctic thermal sensitive uracil-DNA-glycosylase in a lateral flow biosensor: application to the detection of Streptococcus pneumoniae.

The authors report on a loop-mediated isothermal amplification (LAMP) scheme that uses antarctic thermally sensitive uracil-DNA-glycosylase (AUDG) for simultaneous detection of nucleic acids and elimination of carryover contamination. It was applied in a lateral flow assay (LFA) format. The assay has attractive features in that it does not require the use of labeled primers or probes, and can eliminate false-positive results generated by unwanted hybridization between two labeled primers or between a labeled primer and probe. LAMP amplification and AUDG digestion are conducted in a single pot, and the application of a closed-tube reaction prevents false-positives due to carryover contamination. The method was applied to the detection of the human pathogen Streptococcus pneumoniaein in pure cultures and spiked blood samples. This LFA can detect S. pneumoniae in pure cultures with a 25 fg.μL-1 detection limit and in spiked blood samples with a 470 cfu.mL-1 detection limit. Conceivably, this assay can be applied to the detection of various other targets if the specific LAMP primers are available. Graphical abstract ᅟ.

Development of loop-mediated isothermal amplification (LAMP) assays for the rapid detection of allergic peanut in processed food

Peanut is a widely and common used in many cuisines around the world. However, peanut is also one of the most important food allergen for causing anaphylactic reaction. To prevent allergic reaction, the best way is to avoid the food allergen or food containing allergic ingredient such as peanut before food consuming. Thus, to efficient and precisely detect the allergic ingredient, peanut or related product, is essential and required for maintain consumer’s health or their interest. In this study, a loop-mediated isothermal amplification (LAMP) assay was developed for the detection of allergic peanut using specifically designed primer sets. Two sets of the specific LAMP primers respectively targeted the internal transcribed sequence 1 (ITS1) of nuclear ribosomal DNA sequence regions and the ara h1 gene sequence of Arachia hypogeae (peanut) were used to address the application of LAMP for detecting peanut in processed food or diet. The results demonstrated that the identification of peanut using the newly designed primers for ITS 1 sequence is more sensitive rather than primers for sequence of Ara h1 gene when performing LAMP assay. Besides, the sensitivity of LAMP for detecting peanut is also higher than the traditional PCR method. These LAMP primers sets showed high specificity for the identification of the peanut and had no cross-reaction to other species of nut including walnut, hazelnut, almonds, cashew and macadamia nut. Moreover, when minimal 0.1% peanuts were mixed with other nuts ingredients at different ratios, no any cross-reactivity was evident during performing LAMP. Finally, genomic DNAs extracted from boiled and steamed peanut were used as templates; the detection of peanut by LAMP was not affected and reproducible. As to this established LAMP herein, not only can peanut ingredients be detected but commercial foods containing peanut can also be identified. This assay will be useful and potential for the rapid detection of peanut in practical food markets.

Assessing the performance of a Loop Mediated Isothermal Amplification (LAMP) assay for the detection and subtyping of high-risk suptypes of Human Papilloma Virus (HPV) for Oropharyngeal Squamous Cell Carcinoma (OPSCC) without DNA purification

BackgroundOropharyngeal Squamous Cell Carcinoma (OPSCC) is increasing in incidence despite a decline in traditional risk factors. Human Papilloma Virus (HPV), specifically subtypes 16, 18, 31 and 35, has been implicated as the high-risk etiologic agent. HPV positive cancers have a significantly better prognosis than HPV negative cancers of comparable stage, and may benefit from different treatment regimens. Currently, HPV related carcinogenesis is established indirectly through Immunohistochemistry (IHC) staining for p16, a tumour suppressor gene, or polymerase chain reaction (PCR) that directly tests for HPV DNA in biopsied tissue. Loop mediated isothermal amplification (LAMP) is more accurate than IHC, more rapid than PCR and is significantly less costly. In previous work we showed that a subtype specific HPV LAMP assay performed similar to PCR on purified DNA. In this study we examined the performance of this LAMP assay without DNA purification.MethodsWe used LAMP assays using established primers for HPV 16 and 18, and new primers for HPV 31 and 35. LAMP reaction conditions were tested on serial dilutions of plasmid HPV DNA to confirm minimum viral copy number detection thresholds. LAMP was then performed directly on different human cell line samples without DNA purification.ResultsOur LAMP assays could detect 105, 103, 104, and 105 copies of plasmid DNA for HPV 16, 18, 31, and 35, respectively. All primer sets were subtype specific, with no cross-amplification. Our LAMP assays also reliably amplified subtype specific HPV DNA from samples without requiring DNA isolation and purification.ConclusionsThe high risk OPSCC HPV subtype specific LAMP primer sets demonstrated, excellent clinically relevant, minimum copy number detection thresholds with an easy readout system. Amplification directly from samples without purification illustrated the robust nature of the assay, and the primers used. This lends further support HPV type specific LAMP assays, and these specific primer sets and assays can be further developed to test for HPV in OPSCC in resource and lab limited settings, or even bedside testing.

A novel loop-mediated isothermal amplification-based test for detecting Neospora caninum DNA

BackgroundNeospora caninum is a cyst-forming, coccidian parasite which is known to cause neurological disorders in dogs and abortion and neonatal mortality in cows and other livestock. This study reports the development of a loop-mediated isothermal amplification (LAMP) assay based on the Neospora caninum Nc-5 gene and compares its efficacy for detecting DNA to that of a semi-nested PCR test.ResultsSix primers were designed based on the Nc-5 repeat region of N. caninum. Specific LAMP primers led to successful amplification of N. caninum DNA at 63 °C in 30 min. The LAMP assay was highly specific (i.e. it did not reveal cross-reactivity with other parasite species) and had a low N. caninum plasmid DNA limit of detection (1 fg), which is ten times higher than that for the semi-nested PCR. LAMP applicability was evaluated using a set of naturally-infected samples (59 from canine faeces and five from bovine abortions). Thirty-nine percent (25/64) of the naturally-infected samples were positive for N. caninum DNA by LAMP and 36% (23/64) by semi-nested PCR. However, the LAMP assay is much faster to perform than semi-nested PCR and provides results in 30 min.ConclusionThe optimized reaction conditions described in this study resulted in a sensitive, specific and rapid technique for detecting N. caninum DNA. Considering the advantages of LAMP for detecting N. caninum DNA, further assays aimed at testing its usefulness on a wider range of field samples are recommended.

A novel diagnostic method for malaria using loop-mediated isothermal amplification (LAMP) and MinION\u2122 nanopore sequencer

BackgroundA simple and accurate molecular diagnostic method for malaria is urgently needed due to the limitations of conventional microscopic examination. In this study, we demonstrate a new diagnostic procedure for human malaria using loop mediated isothermal amplification (LAMP) and the MinION™ nanopore sequencer.MethodsWe generated specific LAMP primers targeting the 18S–rRNA gene of all five human Plasmodium species including two P. ovale subspecies (P. falciparum, P. vivax, P. ovale wallikeri, P. ovale curtisi, P. knowlesi and P. malariae) and examined human blood samples collected from 63 malaria patients in Indonesia. Additionally, we performed amplicon sequencing of our LAMP products using MinION™ nanopore sequencer to identify each Plasmodium species.ResultsOur LAMP method allowed amplification of all targeted 18S–rRNA genes of the reference plasmids with detection limits of 10–100 copies per reaction. Among the 63 clinical samples, 54 and 55 samples were positive by nested PCR and our LAMP method, respectively. Identification of the Plasmodium species by LAMP amplicon sequencing analysis using the MinION™ was consistent with the reference plasmid sequences and the results of nested PCR.ConclusionsOur diagnostic method combined with LAMP and MinION™ could become a simple and accurate tool for the identification of human Plasmodium species, even in resource-limited situations.

A loop-mediated isothermal amplification (LAMP) assay for the rapid detection of Enterococcus spp. in water

Faecal pollution of water and the resulting potential presence of human enteric pathogens is a predominant threat to public health. Microbiological water quality can be assessed by the detection of standard faecal indicator bacteria (SFIB) such as E. coli or certain Enterococcus species. In recent years, isothermal amplification methods have become a useful alternative to polymerase chain reaction (PCR), allowing molecular diagnostics with simple or no instrumentation. In this study, a novel screening method for the molecular detection of Enterococcus spp. by loop-mediated isothermal amplification (LAMP) is described. A set of six specific LAMP primers was designed to amplify a diagnostic fragment of the Enterococcus 23S rRNA gene, which is present in several enterococcal species targeted by quantitative PCR (qPCR), which is the standard technique recommended by the US Environmental Protection Agency. Sensitivity and specificity tests were performed using a set of 30 Enterococcus and non-target bacterial reference strains. It is shown that LAMP is equally sensitive and even more specific than the qPCR assay. A dilution series of Enterococcus faecalis DNA revealed that the LAMP method can reliably detect 130 DNA target copies per reaction within 45 min. Additionally, enterococci isolated from Austrian surface waterbodies, as well as a set of DNA extracts from environmental waters, were tested. Contingency analysis demonstrated a highly significant correlation between the results of the developed LAMP assay and the reference qPCR method. Furthermore, a simple staining procedure with a fluorescence dye demonstrated the identification of amplified products by eye. In conclusion, this method is an important component for the efficient screening and testing of water samples in low-resource settings lacking sophisticated laboratory equipment and highly trained personnel, requiring only a simple heating block.

Development of a multiplex loop-mediated isothermal amplification method for the simultaneous detection of Salmonella spp. and Vibrio parahaemolyticus

Rapid detection of food-borne pathogens is important in the food industry, to monitor and prevent the spread of these pathogens through contaminated food products. We therefore established a multiplex real-time loop-mediated isothermal amplification (LAMP) assay to simultaneously detect and distinguish Salmonella spp. and Vibrio parahaemolyticus DNA in a single reaction. Two target sequences, one specific for Salmonella and the other specific for Vibrio parahaemolyticus, were amplified by specific LAMP primers in the same reaction tube. After amplification at 65 °C for 60 min, the amplified products were subjected to melting curve analysis and thus could be distinguished based on the different melting temperatures (Tm values) of the two specifically amplified products. The specificity of the multiplex LAMP assay was evaluated using 19 known bacterial strains, including one V. parahaemolyticus and seven Salmonella spp. strains. The multiplex LAMP showed 100% inclusivity and exclusivity, and a detection limit similar to that of multiplex PCR. In addition, we observed and corrected preferential amplification induced by what we call LAMP selection in the multiplex LAMP reaction. In conclusion, our assay was rapid, specific, and quantitative, making it a useful tool for the food industry.

A rapid loop-mediated isothermal amplification (LAMP) method for detection of the macrolide-streptogramin type B resistance gene msrA in Staphylococcus aureus.

Macrolide-streptogramin type B resistance (the MSB phenotype) is a multidrug resistance phenotype in Staphylococcus aureus conferred by the resistance gene msrA. However, bacteria having the MSB phenotype are susceptible to lincosamides and 16-membered ring macrolides, which makes profiling resistance genes necessary and urgent for timely and appropriate use of antimicrobials. In this study, the loop-mediated isothermal amplification (LAMP) assay was optimized for prompt detection of the msrA gene. msrA gene sequences were obtained from the National Center for Biotechnology Information (NCBI) database and primers were designed using the LAMP primer designing software PrimerExplorer v.4, which together recognize seven distinct regions of the msrA gene. The specific LAMP primer set designed in this study could amplify the msrA gene within 25min at an isothermal temperature of 62°C. More importantly, the msrA gene could be detected at a sensitivity as low as 100pg. Furthermore, this optimized LAMP assay provided swift detection of the msrA gene even directly from human specimens. In conclusion, this assay may have great clinical application potential for detection of the msrA gene.

Sex determination in the wild: a field application of loop-mediated isothermal amplification successfully determines sex across three raptor species.

PCR-based methods are the most common technique for sex determination of birds. Although these methods are fast, easy and accurate, they still require special facilities that preclude their application outdoors. Consequently, there is a time lag between sampling and obtaining results that impedes researchers to take decisions insitu and in real time considering individuals' sex. We present an outdoor technique for sex determination of birds based on the amplification of the duplicated sex-chromosome-specific gene Chromo-Helicase-DNA binding protein using a loop-mediated isothermal amplification (LAMP). We tested our method on Griffon Vulture (Gyps fulvus), Egyptian Vulture (Neophron percnopterus) and Black Kite (Milvus migrans) (family Accipitridae). We introduce the first fieldwork procedure for sex determination of animals in the wild, successfully applied to raptor species of three different subfamilies using the same specific LAMP primers. This molecular technique can be deployed directly in sampling areas because it only needs a voltage inverter to adapt a thermo-block to a car lighter and results can be obtained by the unaided eye based on colour change within the reaction tubes. Primers and reagents are prepared in advance to facilitate their storage at room temperature. We provide detailed guidelines how to implement this procedure, which is simpler (no electrophoresis required), cheaper and faster (results in c. 90min) than PCR-based laboratory methods. Our successful cross-species application across three different raptor subfamilies posits our set of markers as a promising tool for molecular sexing of other raptor families and our field protocol extensible to all bird species.

Loop-mediated isothermal amplification for visual detection of hepatitis B virus

To investigate the method of loop-mediated isothermal amplification (LAMP) using boiled serum for visual detection of hepatitis B virus (HBV). Specific LAMP primers were designed according to the conservative region compared with the sequence of S genes in GenBank, and DNA of the samples was extracted by kit and boiling methods. The reaction conditions of LAMP were optimized, and HBV standard strains and clinical samples were examined to evaluate the specificity, sensitivity, and anti-interference ability of LAMP. Visual detection was performed for the results of LAMP, and SPSS 17.0 was used for consistency test. The optimal reaction conditions of LAMP were established. LAMP had a high specificity, and there was no nonspecific amplification. The sensitivity of LAMP was 10 copies/tube, regardless of the method for nucleic acid extraction. Hydroxynaphthol blue (HNB) had a comparable sensitivity to electrophoresis and SYBR Green I, and, unlike SYBR Green I, did not cause aerosol pollution easily. In addition, with fluorescent quantitative PCR (FQ-PCR) as the gold standard, LAMP using the boiling method and FQ-PCR were in good consistency (Kappa = 0.762, P > 0.05). However, PCR using boiling method was not well consistent with FQ-PCR (Kappa = 0.186, P < 0.05). LAMP has certain advantages over PCR in detecting HBV infection, and LAMP can be used to detect HBV in the field or primary hospitals.

Rapid authentication of the precious herb saffron by loop-mediated isothermal amplification (LAMP) based on internal transcribed spacer 2 (ITS2) sequence.

Saffron is one of the most expensive species of Chinese herbs and has been subjected to various types of adulteration because of its high price and limited production. The present study introduces a loop-mediated isothermal amplification (LAMP) technique for the differentiation of saffron from its adulterants. This novel technique is sensitive, efficient and simple. Six specific LAMP primers were designed on the basis of the nucleotide sequence of the internal transcribed spacer 2 (ITS2) nuclear ribosomal DNA of Crocus sativus. All LAMP amplifications were performed successfully, and visual detection occurred within 60 min at isothermal conditions of 65 °C. The results indicated that the LAMP primers are accurate and highly specific for the discrimination of saffron from its adulterants. In particular, 10 fg of genomic DNA was determined to be the limit for template accuracy of LAMP in saffron. Thus, the proposed novel, simple, and sensitive LAMP assay is well suited for immediate on-site discrimination of herbal materials. Based on the study, a practical standard operating procedure (SOP) for utilizing the LAMP protocol for herbal authentication is provided.

Loop-Mediated Isothermal Amplification for the Rapid Detection of the F200Y Mutant Genotype of Carbendazim-Resistant Isolates of Sclerotinia sclerotiorum.

The point mutation at codon 200 (TTC→TAC, F200Y) confers moderate resistance to carbendazim in Sclerotinia sclerotiorum. This mutant genotype (F200Y) has been detected mainly by determining the minimum inhibitory concentration (MIC), which requires 3 to 5 days. Here, we developed a loop-mediated isothermal amplification (LAMP) assay for the rapid detection of the F200Y mutant genotype of carbendazim-resistant isolates of S. sclerotiorum. Specific LAMP primers were designed and concentrations of LAMP components were optimized. The optimal reaction conditions were 62 to 63°C for 45 min. The new LAMP assay requires no special equipment and is highly sensitive and specific (the i.e., it generated positive results with F200Y mutant genotype but generated negative results with other carbendazim-resistant mutants and with a variety of carbendazim-resistant mutants of Botrytis cinerea and Fusarium graminearum). Inclusion of the loop backward (LB) primer reduced the reaction time to 15 min. Results were identical with LAMP and MIC determinations. The advantages of the LB-accelerated LAMP assay for detection of the F200Y mutant genotype were demonstrated by assaying sclerotia produced on rape stems that were artificially inoculated in the field. The results indicated that the new LAMP assay represents an improved way to detect the F200Y mutant genotype of carbendazim-resistant isolates of S. sclerotiorum.

Specific detection of Type 1 and Type 2 isolates of Pyrenochaeta lycopersici by loop-mediated isothermal amplification reaction

ABSTRACTPyrenochaeta lycopersici is the causal agent of corky root, an important soilborne disease of tomato (Lycopersicon esculentum) and other solanaceous crops. P. lycopersici isolates are classified into Types 1 and 2 on the basis of several physiological and molecular features. In this study, we aimed to establish a loop-mediated isothermal amplification (LAMP) method to identify Types 1 and 2 isolates. Using specific LAMP primer sets for Types 1 and 2, both types were easily identified within 35 min. The LAMP method demonstrated equal sensitivity to the polymerase chain reaction in molecular identification of the pathogen in cultured mycelia, infested plant roots, and their surrounding soil. The LAMP technology will contribute to the detection and identification of the pathogen, crop protection, and thorough understanding about the ecology of corky root disease of tomato.

Development of a Rapid Event-Specific Loop-Mediated Isothermal Amplification Detection Method for Genetically Modified Maize NK603

In the present study, a loop-mediated isothermal amplification (LAMP) system was developed for detecting NK603 maize, and flanking sequence in NK603 maize was used as the target template to design event specific LAMP primers. Different kinds of genetically modified (GM) or non GM crops were selected to ensure the specificity of detection and the results of the non-target samples were negative, indicating that the primer set for NK603 maize had good levels of specificity. The limit of detection (LOD) of the LAMP system was about 50 copies of the maize haploid genome. Moreover, the amplified reaction could be accomplished in about 1 h, and the LAMP amplification products tend to be far longer than conventional PCR products and thus easier to be visible to naked eyes via end point analysis. Therefore, the LAMP method developed by this study is visual, faster, and more sensitive, and does not need special equipment compared to traditional PCR technique, which is very useful for detecting transgenic maize aimed at screening the growing transgenic crops in the fields and detecting GM ingredients in imported and domestic foods.

Rapid and sensitive identification of the herbal tea ingredient Taraxacum formosanum using loop-mediated isothermal amplification.

Taraxacum formosanum (TF) is a medicinal plant used as an important component of health drinks in Taiwan. In this study, a rapid, sensitive and specific loop-mediated isothermal amplification (LAMP) assay for authenticating TF was established. A set of four specific LAMP primers was designed based on the nucleotide sequence of the internal transcribed spacer 2 (ITS2) nuclear ribosomal DNA (nrDNA) of TF. LAMP amplicons were successfully amplified and detected when purified genomic DNA of TF was added in the LAMP reaction under isothermal condition (65 °C) within 45 min. These specific LAMP primers have high specificity and can accurately discriminate Taraxacum formosanum from other adulterant plants; 1 pg of genomic DNA was determined to be the detection limit of the LAMP assay. In conclusion, using this novel approach, TF and its misused plant samples obtained from herbal tea markets were easily identified and discriminated by LAMP assay for quality control.

Development of the Novel Loop Mediated Isothermal Amplification (LAMP) of IS711 Sequence for Rapid Detection of Brucella Species

A reliable and novel loop mediated isothermal amplification (LAMP) was developed in the laboratory for rapid and specific detection of the Brucella species. Four specific LAMP primers were designed targeting IS711 gene, a highly conserved element in the genus Brucella. The assay could correctly amplified Brucella abortus S19, B. abortus S99, B. abortus, B. melitensis and eight clinical isolates of B. abortus but did not show any cross reaction with non-Brucella organisms. Detection limit of LAMP assay was 75 fg.