Specific Capacity Research Articles

Achieving Remarkable Specific Mechanical Strength and Energy Absorption Capacity in SiC Nanowire Networks through Graded Structural Design.

Lightweight porous ceramics with a unique combination of superior mechanical strength and damage tolerance are in significant demand in many fields such as energy absorption, aerospace vehicles, and chemical engineering; however, it is difficult to meet these mechanical requirements with conventional porous ceramics. Here, we report a graded structure design strategy to fabricate porous ceramic nanowire networks that simultaneously possess excellent mechanical strength and energy absorption capacity. Our optimized graded nanowire networks show a compressive strength of up to 35.6 MPa at a low density of 540 mg·cm-3, giving rise to a high specific compressive strength of 65.7 kN·m·kg-1 and a high energy absorption capacity of 17.1 kJ·kg-1, owing to a homogeneous distribution of stress upon loading. These values are top performance compared to other porous ceramics, giving our materials significant potential in various engineering fields.

A Robust Network Sodium Carboxymethyl Cellulose-Epichlorohydrin Binder for Silicon Anodes in Lithium-Ion Batteries.

Silicon (Si), as an ideal anode component for lithium-ion batteries, is susceptible to substantial volume changes, leading to pulverization and excessive electrolyte consumption, ultimately resulting in a rapid decline in the cycle stability. Herein, a new sodium carboxymethyl cellulose-epichlorohydrin (CMC-ECH) binder featuring a three-dimensional (3D) network cross-linked structure is synthesized by a simple ring-opening reaction, which can effectively bond the Si anode through abundant covalent and hydrogen bonds to mitigate its pulverization. Benefitting from the merits of the CMC-ECH binder, the electrochemical performance is significantly enhanced compared to the CMC binder. The CMC-ECH binder is applied to Si anodes, a specific capacity of 1054.2 mAh g-1 can be maintained at 0.2 C following 200 cycles under an elevated Si mass loading of around 1.0 mg cm-2, and the corresponding capacity retention is 65.6%. In the case of the LiFePO4//Si@CMC-ECH full battery, the cycle stability exhibits a substantial enhancement compared with the LiFePO4//Si@CMC full battery. Furthermore, the CMC-ECH binder demonstrates compatibility with micron-Si anode materials. Based on the above, we have successfully developed a facilely prepared water-based CMC-ECH binder that is suitable for Si and micron-Si anodes in lithium-ion batteries.

Optimizing Hard Carbon Anodes from Agricultural Biomass for Superior Lithium and Sodium Ion Battery Performance.

Biomass-derived carbon materials are gaining attention for their environmental and economic advantages in waste resource recovery, particularly for their potential as high-energy materials for alkali metal ion storage. However, ensuring the reliability of secondary battery anodes remains a significant hurdle. Here, we report Areca Catechu sheath-inner part derived carbon (referred to as ASIC) as a high-performance anode for both rechargeable Li-ion (LIBs) and Na-ion batteries (SIBs). We explore the microstructure and electrochemical performance of ASIC materials synthesized at various pyrolysis temperatures ranging from 700 to 1400 °C. ASIC-9, pyrolyzed at 900 °C, exhibits multilayer stacked sheets with the highest specific surface area, and the least lateral size and stacking height. ASIC-14, pyrolyzed at 1400 °C, demonstrates the most ordered carbon structure with the least defect concentration and the highest stacking height and an increased lateral size. ASIC-9 achieves the highest capacities (676 mAh/g at 0.134C) and rate performance (94 mAh/g at 13.4C) for hosting Li+ ions, while ASIC-14 exhibits superior electrochemical performance for hosting Na+ ions, maintaining a high specific capacity after 300 cycles with over 99.5% Coulombic efficiency. This comprehensive understanding of structure-property relationships paves the way for the practical utilization of biomass-derived carbon in various battery applications.

Prediction of Halogenated MXenes as Electrode Materials for Halide-Ion Batteries.

Exploring and developing new rechargeable halide-ion batteries plays an important role in the advancement and growth of the ion battery family. Here, we systematically explored the feasibility of single-layer MXenes and their hydrogenated derivatives as electrode materials for halide-ion batteries via first-principles theory. The calculated results indicate that halide ions (T ions) can be stably and efficiently adsorbed on the surfaces of M2X and M2XH2, with theoretical specific capacities ranging from 227 to 497 mAh g-1. The diffusion barriers of the T ion on MXenes are from 0.55 to 0.10 eV, comparable to those of the Li ion in graphite and LiCoO2. The electronegativity of halide anions displays significant impacts on their discharge voltage plateaus on M2X, with the highest voltage up to 5.60 V for the F ion. As a comparison, the hydrogenation of M2XH2 with less surface activity raises a 2-3 V voltage reduction. All MXene-based full cells of TxTi2C|TyTi2CH2 (where x = 0-2 and y = 2-0) and TxTi2N|TyTi2NH2 (where x = 0-2 and y = 2-0) demonstrated high full battery specific energies for F-, Cl-, and Br-ion batteries, up to 462 Wh kg-1. These results demonstrate the potential of new halide-ion battery designs, paving the way for future research and innovation in battery technology.

Uncovering the Nonequilibrium Evolution Mechanism between Na2+2 δFe2- δ(SO4)3 Cathode and Impurities in the Na2SO4-FeSO4·7H2O Binary System for High-Voltage Sodium-Ion Batteries.

Sodium-ion batteries are increasingly recognized as ideal for large-scale energy storage applications. Alluaudite Na2+2 δFe2- δ(SO4)3 has become one of the focused cathode materials in this field. However, previous studies employing aqueous-solution synthesis often overlooked the formation mechanism of the impurity phase. In this study, the nonequilibrium evolution mechanism between Na2+2 δFe2- δ(SO4)3 and impurities by adjusting ratios of the Na2SO4/FeSO4·7H2O in the binary system is investigated. Then an optimal ratio of 0.765 with reduced impurity content is confirmed. Compared to the poor electrochemical performance of the Na2.6Fe1.7(SO4)3 (0.765) cathode, the optimized Na2.6Fe1.7(SO4)3@CNTs (0.765@CNTs) cathode, with improved electronic and ionic conductivity, demonstrates an impressive discharge specific capacity of 93.8 mAh g-1 at 0.1 C and a high-rate capacity of 67.84 mAh g-1 at 20 C, maintaining capacity retention of 71.1% after 3000 cycles at 10 C. The Na2.6Fe1.7(SO4)3@CNTs//HC full cell reaches an unprecedented working potential of 3.71V at 0.1 C, and a remarkable mass-energy density exceeding 320Wh kg-1. This work not only provides comprehensive guidance for synthesizing high-voltage Na2+2 δFe2- δ(SO4)3 cathode materials with controllable impurity content but also lays the groundwork of sodium-ion batteries for large-scale energy storage applications.

Ti-Substituted O3-NaNi0.5Mn0.3Ti0.2O2 Material with a Disordered Transition Metal Layer and a Stable Structure.

O3-type NaNi0.5Mn0.5O2 (NNM) is very competitive for sodium-ion batteries (SIBs) due to its high capacity and easy production. Nevertheless, the intricate phase transitions during the charging-discharging significantly impede its practical application. This paper proposes a strategy for successfully synthesizing NaNi0.5Mn0.3Ti0.2O2 (NNMT) by combining coprecipitation and a high-temperature solid-state method. This method introduces Ti elements while retaining the electrochemically active Ni2+ content, thus, the NNMT has a high initial specific capacity of 151.4 mAh g-1 at 1 C. It is demonstrated that introducing Ti4+ leads to the transition metal layers becoming disordered by ex situ XRD, thus mitigating the irreversible phase transition of the material. In addition, Ti4+ does not have an outer electron, which can reduce electron delocalization in the transition metal layer and improve the material's cyclic stability. The NNMT possesses a capacity retention rate of 60.66% after 150 cycles, much higher than the initial NNM's 18.96%. It also exhibits an excellent discharge capacity of 86.8 mAh g-1 at 5 C. In conclusion, the cycling and rate performance of the Ti-substituted NNMT are greatly improved without capacity loss, which offers innovative concepts for the modification means of the SIBs layered oxide cathode materials.

A universal strategy towards high-rate and ultralong-life of Li‐rich Mn‐based cathode materials

Lithium-rich manganese-based cathode materials (LRMs) have shown promise for the next-generation lithium battery cathodes due to their high discharge specific capacity (∼250 mAh g−1) and wide operating voltage range (2.0–4.8 V). However, these materials face limitations such as low initial Coulombic efficiency (ICE), poor cycle stability, and inadequate rate capability. To address these challenges, we employed a simple citric acid treatment (CA-treatment) method to fabricate the Li-rich spinel coating layer on LRMs. This in situ formed spinel Li4Mn5O12 layer successfully suppresses the oxygen release, provides three-dimensional (3D) lithium-ion diffusion channels and enriches Li embedding sites, resulting in a substantial improvement in the rate capability and high-rate cycling performance. The modified LRM delivers a high specific capacity of 193.7 mAh g−1 at 2.0 C and 154.8 mAh g−1 at 5.0 C, after 1000 cycles at 10.0 C, 77.4 % capacity retention with 102.5 mAh g−1 is realized. This facile CA-treatment benefits the electrochemical properties of LRMs comparable to those of altering the microscopic morphology. This work offers a new avenue for exploring outstanding LRMs with high-rate and ultralong cycling life.

Efficient utilization of lignin heterogeneity: Employing a simple approach to modulate the structure-effect relationship of lignin microspheres for its high-quality applications in supercapacitors

Lignin, an abundant, sustainable, and cost-effective biomass material, is recognized for its high carbon content, making it an ideal candidate for supercapacitors electrode. However, the inhomogeneity of lignin and the amorphous structure of lignin-derived carbon limit its application in energy storage. To effectively address the aforementioned issues, this study initially fractionated alkali lignin (AL) using a green γ-valerolactone/water system to obtain two fractions (L1 and L2) with distinct molecular weights and phenolic hydroxyl contents. The aim of this initiative was to reduce the heterogeneity of the lignin. Subsequently, three groups of lignin microspheres (LMS-AL, LMS-L1 and LMS-L2) with different morphologies were prepared from AL, L1, and L2 using an industrially proven spray-drying technique. This initiative significantly increased the specific surface area of lignin. Ultimately, lignin microspheres were carbonized to prepare carbon microspheres (LMSC-AL, LMSC-L1 and LMSC-L2) that could be used as supercapacitor electrodes. Notably, LMSC-L1 demonstrated superior electrochemical performance, with a specific capacitance of 200 F g−1 at a current density of 1 A g−1, and retaining 93.34 % capacitance after 15,000 charge/discharge cycles. The excellent electrochemical performance of LMSC-L1 is attributed to its elevated specific surface area (388.1 m2 g−1) and substantial porosity (0.238 cm3 g−1). This study also explored practical application, with LMSC-L1 successfully powering LED lights and calculators. Through this research, we have developed a simple method is proposed to modulate the structure of lignin microspheres by leveraging the heterogeneity of lignin itself. Furthermore, we systematically investigated the structure-effect relationship of lignin microspheres and the electrochemical properties of their carbonized microspheres. This work lays a foundational framework for the efficient utilization of lignin in energy storge applications.

Importance of Morphology of Layered Double Hydroxide in Electrochemical Energy Storage and Catalysis.

The development of nanomaterials for energy storage and conversion has always been important. Layered double hydroxide (LDH) is a promising material due to its high capacity, tunable composition and easy synthesis. In this work, the morphology of NiCo-LDH is tuned with surfactants including sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB), and investigated the correlation between morphology and electrochemical properties. NiCo-LDH-SDS with a layered structure exhibited a specific capacitance of 1004 C g-1 at 1 A g-1, which is higher than that of the needle-like NiCo-LDH-CTAB (678 C g-1) and the rod-like NiCo-LDH (279 C g-1). Meanwhile, NiCo-LDH-SDS and NiCo-LDH-CTAB showed a reduction of 36 and 19mV, respectively, in their overpotentials at 10mA cm-2 compared to NiCo-LDH. Contact angle and adhesive force measurements proved the influence of morphology on the interfacial properties that layered structure is favorable for the timely detachment of the bubbles. Therefore, rational morphology regulation of LDH can effectively alter the gas-liquid-solid interface and thereby accelerate the reaction kinetics. The connections between morphologies, bubbles releasing and electrochemical performance are well established in this work, which can be applied in the investigation of nanomaterials for energy-related activities, especially the ones concerning bubbles releasing processes.

Concerted Formation of Reversibly Precipitated Sulfur Species and Its Importance for Lean Electrolyte Lithium-Sulfur Batteries.

Achieving high energy densities for lithium-sulfur batteries remain elusive. Largely limited by the volume of electrolyte used, lean electrolyte conditions (electrolyte/sulfur mass ratio <3) present enormous challenges that have led to very poor specific capacity and rate performance. Previous studies have identified that the high concentration of polysulfide is responsible for the poor discharge voltage. However, there still lacks sufficient understanding of the processes occurring at lean electrolyte conditions. In this work we uncovered a polysulfide concentration regulating mechanism that operates through the precipitation and redissolution of solid sulfur-based species (reversibly precipitated sulfur species, RPSS). This occurs in a concerted manner in a global sense through the cathode and can be measured using impedance spectroscopy. It was found that the more RPSS that is formed, the higher the energy density of discharge. We propose that high concentration of polysulfide tends to supersaturate, which impeded the formation of RPSS. Employing an electrolyte with low Li ion concentration along with using poorly dissociating lithium salts allowed for more RPSS formation and ultimately enabled discharge at >2.0 V at 0.05 C, at E/S = 2.5, and at room temperature without the use of an engineered cathode.

A Redox-Active Iron-Organic Framework Cathodes for Sustainable Magnesium Metal Batteries.

Rechargeable magnesium metal batteries (RMBs) have shown promising prospects in sustainable energy storage due to the high crustal abundance, safety, and potentially large specific capacity of magnesium. However, their development is constrained by the lack of effective cathode materials that can achieve high capacity and stable magnesium storage at a practically reasonable rate. Herein, we construct a three-dimensional (3D) iron(III)-dihydroxy-benzoquinone (Fe2(DHBQ)3) metal-organic framework (MOF) material with dual redox centers of Fe3+ cations and DHBQ2- anions for reversible storage of Mg2+ in RMBs. Spectroscopic analysis and density functional theory (DFT) calculations reveal the redox chemistry of both Fe3+ ions and carbonyls from DHBQ ligands during electrochemical processes. Benefiting from the rational structure, the Fe2(DHBQ)3∥Mg cells exhibit a high reversible capacity of 395.3 mAh/g, large energy density of 463.5 Wh/kg, and high power density of 2456.0 W/kg. Moreover, the high electronic conductivity (8.35 × 10-5 S/cm) and favorable diffusion path of Mg2+ in Fe2(DHBQ)3 endow the cells with exceptional cycling stability and rate capability with a long life of 5000 cycles at 2000 mA/g. The dual redox-active MOF demonstrates a category of advanced cathode materials for high-performance RMBs.

Customized Li+ Solvation Sheath at the Poly(ethylene oxide)-Based Electrolyte/Ultrahigh-Nickel Cathode Interface toward Room-Temperature Solid-State Lithium Batteries.

The matching of poly(ethylene oxide) (PEO)-based electrolytes with ultrahigh-nickel cathode materials is crucial for designing new-generation high-energy-density solid-state lithium metal batteries (SLMBs), but it is limited by serious interfacial side reactions between PEO and ultrahigh-nickel materials. Here, a high-concentration electrolyte (HCE) interface with a customized Li+ solvation sheath is constructed between the cathode and the electrolyte. It induces the formation of an anion-regulated robust cathode/electrolyte interface (CEI), reduces the unstable free-state solvent, and finally achieves the compatibility of PEO-based electrolytes with ultrahigh-nickel cathode materials. Meanwhile, the corrosion of the Al current collector caused by lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) ions is prevented by lithium difluoro(oxalato)borate (LiDFOB) ions. The synergistic effect of the double lithium salt is achieved by a well-tailored ratio of TFSI- and DFOB- in the first solvation sheath of Li+. Compared with reported PEO-based SLMBs matched with ultrahigh-nickel (Ni ≥ 90%) cathodes, the SLMB in this work delivers a high discharge specific capacity of 216.4 mAh g-1 (0.1C) even at room temperature. This work points out a direction to optimize the cathode/electrolyte interface.

Metal-Organic Framework with Dual Excitation Pathways as Efficient Bifunctional Catalyst for Photo-assisted Li-O2 Batteries.

Li-O2 batteries (LOBs) have sparked significant interest due to their fascinating high theoretical energy density. However, the large overpotential for the formation and oxidation of Li2O2 during charge and discharge process seriously hinders the further development and application of LOBs. In this work, metal-organic frameworks (MOFs) with different metal clusters (Fe, Ti, Zr) are successfully synthesized, and they are employed as the photoelectrodes for the photo-assisted LOBs. The special dual excitation pathways of Fe-MOF under illumination and the superior separation efficiency of photocarriers, which significantly enhance the activation of O2/Li2O2, improving the catalytic activity of oxygen reduction reaction and oxygen evolution reaction. Moreover, compared to traditional inorganic semiconductor crystals, Fe-MOF exhibits large specific surface area and excellent O2 adsorption ability. Therefore, the LOB with Fe-MOF as the cathode exhibits large specific capacity, ultralow charge/discharge overpotential of 0.22V at 0.05mA cm-2 and excellent stability of 195 cycles under illumination. This study provides an environmentally friendly and highly efficient photocatalyst for LOBs, and a new strategy for designing photoelectrodes.

Magnetic transition magnetocaloric and supercapacitor behavior in synthesized Sn0.6Mn0.1Ge0.3Te alloys

This study comprehensively investigates the structural, microstructural, vibrational, magnetic, and magnetocaloric properties of novelty Sn0.6Mn0.1Ge0.3Te alloys synthesized using the sealed tube solid-state reaction method. The observed magnetic behavior showcases a transition from paramagnetic (PM) to ferromagnetic (FM) phases at the Curie temperature TC = 29 K. Notably, magnetic entropy change (−ΔSM), relative cooling power (RCP), and refrigerant capacity (RC) are calculated as 1.5 J/kg-K, 42.05 J/kg, and 37.39 J/kg, respectively, under a magnetic field of 60 kOe. Arrott curve analysis further validates the magnetic phase transition, affirming a second-order transition between FM and PM phases. Critical exponents (β, γ, and δ) are derived from field-dependent magnetic entropy changes around the second-order transition and strongly agree with the mean field model. These critical exponents establish a clear correlation between critical behavior and magnetocaloric effects, reinforcing the potential of Sn0.6Mn0.1Ge0.3Te alloys for magnetocaloric applications. Investigations into the electrochemical properties of the alloy have indicated that it exhibits a specific capacitance of 152.9 F/g at a scan rate of 20 mV/s, demonstrating a predominantly pseudocapacitive charge storage mechanism. Additionally, the alloy has proven to be highly stable, retaining 94.2 % of its specific capacitance after 10,000 cycles.

Optimizing Energy Storage Performance: In situ Synthesized Manganese Oxide (Mn3O4) Nanoparticle‐Based Symmetric Supercapacitor on a Paper Substrate

AbstractIn this study, a redox reaction is employed to synthesize manganese oxide (Mn3O4) nanoparticles using potassium permanganate as a precursor in the presence of diethyl amine. The structural characterization reveals the formation of the tetragonal phase of Mn3O4 nanoparticles with a space group of I41/amd. A free‐standing Mn3O4‐based paper electrode is fabricated and its electrochemical performances are investigated. The electrode exhibits a maximum specific capacitance value of ~353 F g−1 and an areal capacitance of ~530 mF cm−2 at a current density of 0.2 A g−1. A symmetric supercapacitor‐based device is also designed using Mn3O4 nanoparticles as an active material in a gel electrolyte configuration. The Mn3O4 device achieves specific and areal capacity values of ~208 mAh g−1 and 260 mA cm−2, respectively, at a current density of 0.3 A g−1. The device delivers maximum energy and power density values of ~104 Wh kg−1 and ~220 W kg−1, respectively, with ~92 % specific capacity retention at 0.3 A g−1 after 5000 cycles. The above results suggest that the Mn3O4‐based device has the potential for energy storage applications.

Bilayered Vanadium Oxides Pillared by Strontium Ions and Water Molecules as Stable Cathodes for Rechargeable Zn-Metal Batteries.

Vanadium-based compounds have attracted significant attention as cathodes for aqueous zinc metal batteries (AZMBs) because of their remarkable advantages in specific capacities. However, their low diffusion coefficient for zinc ions and structural collapse problems lead to poor rate capability and cycle stability. In this work, bilayered Sr0.25V2O5·0.8H2O (SVOH) nanowires are first reported as a highly stable cathode material for rechargeable AZMBs. The synergistic pillaring effect of strontium ions and water molecules improves the structural stability and ion transport dynamics of vanadium-based compounds. Consequently, the SVOH cathode exhibits a high capacity of 325.6mAhg-1 at 50mAg-1, with a capacity retention rate of 72.6% relative to the maximum specific capacity at 3.0Ag-1 after 3000 cycles. Significantly, a unique single-nanowire device is utilized to demonstrate the excellent conductivity of the SVOH cathode directly. Additionally, the energy storage mechanism of zinc insertion and extraction is investigated using a variety of advanced in situ and ex situ analysis techniques. This method of ion intercalation to improve electrochemical performance will further promote the development of AZMBs in large-scale applications.

Fabrication ofAMulti-functional SeparatorIncorporating Crown ether-PolyoxometalateSupramolecular CompoundforLithium-SulfurBatteries.

Recently, research on polyoxometalates (POMs) has gained significant momentum. Owing to their properties as electronic sponges, POMs catalystharbor substantial potential in lithium-sulfur battery research. However, POMs undergo a transformation into reduced heteropoly blue (HPB) during electrochemical reactions, which then dissolve into the electrolyte, resulting incatalyst loss. In this research, we amalgamated 18-crown-6(CR6)with K3PW12O40, (KPW), synthesized a novel POM-basedsupramolecular compound, and integrated it with graphene oxide(GO) to fabricate a multi-functional composite polypropylene (PP) separatorKPW-CR6/GO/PP. The crown ether array was employed to immobilizePOM and construct ion transport channels, thereby enhancing the Li+migration rate and capturing polysulfides. Subsequently, leveraging the stable structure and redox properties of POM, the polysulfide is catalyzed to transform and inhibit the shuttle effect, thereby protecting the Lianode.The lithium-sulfur batteries with the Crown ether-POM supramolecular compoundseparators, exhibit enhanced capacity and stability (1073.3mAh g-1at 1.0C, and 81.5% retention rate after 250 cycles). Thebattery (Sloading:3.2 mg cm-2) presents an initial specific discharge capacity of 543.4 mAh g-1at 0.5 C, with 89.8% of the capacity retained after 160 cycles.Thisunderlinesthe practical application potential of Crown ether-POM supramolecular materials in Li-S batteries.

Influence of graphene nanoplatelets on the thermal conductivity of heat transfer oils based on the developed hotwire method

The thermal conductivity measurements of graphene nanoplatelets (GNP) loaded mineral oil suspensions are obtained using an unconventional custom-made Transient Hot-Wire setup using tungsten. The presence of a few layers of graphene in the prepared GNP using a single-step ultrasonication of graphite microparticles without the use of a surfactant is verified by AFM, TEM, Raman Spectroscopy, XRD, and XPS techniques. We measured the thermal conductivity and the specific heat capacity ( Cp ) of GNP-loaded mineral oil suspensions. The experimental result shows a maximum of 45.5% increment in the thermal conductivity of the mineral oil with 1 mg ml−1 (11.481 ×10−4 weight fraction) loading of GNP at 30 °C. Despite thermal conductivity enhancements, the results indicate that the Cp is not compromised, since a low concentration of nanoplatelets was used. The experimental results agree with the Maxwell-Garnett effective medium approach (MGEMA) model for the thermal conductivity of nanofluids which we found to be suitable for lower loading of nanoparticles. We propose GNP incorporated mineral oil suspensions are effective when it comes to heat transfer fluids even with the lower volume and mass fractions.

Insights from local government managers: Navigating crises through organizational capacities and perceptions

AbstractRecent years have shown that strategic responses to crises by local governments (LGs) depend on the type of crisis, the institutional environment, but also internal capacities and sensemaking processes. However, such relationships have not been tested widely yet. Based on a survey of managers (n = 590) from cities with more than 15,000 inhabitants in France, Germany, Italy, and the United Kingdom, this study explores the role played by specific organizational capacities (critical thinking, bricolage, and financial capacities) and crisis perceptions (valence—i.e., threat vs. opportunity; and controllability) in shaping adaptive or regressive response strategies. Results show that these capacities are associated with how LGs' managers perceive crises and the type of responses adopted. Higher financial capacity, bricolage, and critical thinking are associated with stronger sense of organizational controllability, but they have different relationships with threat and opportunity perceptions. The study confirms the importance of distinguishing valence (threat and opportunity) from controllability perceptions.

Thermal performance of MgCl2–NaCl–KCl eutectic salt for the next generation concentrated solar power and correlation between structure and thermophysical properties: Insights from atomic and electronic levels

MgCl2–NaCl–KCl (MgNaK) eutectic salt has emerged as a highly promising candidate for concentrated solar power (CSP), with extensive research conducted in recent years. However, the thermal property data for the MgNaK eutectic salt are still very limited. Here, we present a novel and accurate many-body potential trained by machine learning (ML) for MgNaK eutectic salt (with mole fractions of 45.4 %, 33 %, and 21.6 % respectively), developed using energies and forces extracted from first-principles molecular dynamics calculations (FPMD). The performance of the potential is well tested. We conduct a detailed investigation on the temperature-dependent structural and corresponding thermal properties, analyzing them from both the atomic and electronic perspectives. The introduction of Na+ or K+ ions disrupts the net structure formed by corner-joint and edge-joint MgClx units, thereby affecting the transport properties. The calculated density (ρ) and constant pressure specific heat capacity (CP) exhibit agreement with experimental data within a margin of 2 %. We observe and discuss the typical λ of negative linear temperature correlation, which is similar to other molten alkali chloride salts. Finally, based on the simulated and experimental values, we provide reliable recommendations for the λ and viscosities (η) of MgNaK eutectic salt across its entire operating temperature range.