Specific Capacity Research Articles

P/n-Type Polyimide Covalent Organic Frameworks for High-Performance Cathodes in Sodium-Ion Batteries.

Covalent organic frameworks (COFs) are viewed as promising organic electrode materials for metal-ion batteries due to their structural diversity and tailoring capabilities. In this work, firstly using the monomers N,N,N',N'-tetrakis(4-aminophenyl)-1,4-phenylenediamine (TPDA) and terephthaldehyde (TA), p-type phenylenediamine-based imine-linked TPDA-TA-COF is synthesized. To construct a bipolar redox-active, porous and highly crystalline polyimide-linked COF, i.e., TPDA-NDI-COF, n-type 1,4,5,8-naphthalene tetracarboxylic dianhydride (NDA) molecules are incorporated into p-type TPDA-TA-COF structure via postsynthetic linker exchange method. This tailored COF demonstrated a wide potential window (1.03.6 V vs Na+/Na) with dual redox-active centers, positioning it as a favorable cathode material for sodium-ion batteries (SIBs). Owing to the inheritance of multiple redox functionalities, TPDA-NDI-COF can deliver a specific capacity of 67 mAh g-1 at 0.05 A g-1, which is double the capacity of TPDA-TA-COF (28 mAh g-1). The incorporation of carbon nanotube (CNT) into the TPDA-NDI-COF matrix resulted in an enhancement of specific capacity to 120 mAh g-1 at 0.02 A g-1. TPDA-NDI-50%CNT demonstrated robust cyclic stability and retained a capacity of 92 mAh g-1 even after 10 000 cycles at 1.0 A g-1. Furthermore, the COF cathode exhibited an average discharge voltage of 2.1 V, surpassing the performance of most reported COF as a host material.

Effect of processing parameters on the properties of carbon paper as a free-standing supercapacitor electrode

As newly emerging energy storage devices, supercapacitors are being investigated thoroughly by researchers. Free-standing electrode is one of the major research focuses in this area, which not only avoids the use of resistive binders but also simplifies device assembly. The study describes the synthesis and study of carbon fiber-based carbon carbon composite paper (heat treated to different temperatures) as a free-standing supercapacitor electrode. Due to the inert nature of carbon paper, it was activated to create defect sites and to increase the specific surface area. Electrochemical studies suggested that activated carbon paper heat treated to 750°C (ACP-750) exhibited the highest areal capacitance of 11.4 F/cm2 (422.2 F/g) at the current density 2.5 mA/cm2 (0.09 A/g), probably due to the generation of larger number of defect sites (as depicted by XRD and RAMAN studies). ACP-750 electrode was used to fabricate the solid-state symmetric supercapacitor device that exhibited an energy density 0.77 Wh/cm2 at a power density of 2.34 W/cm2. The electrode was allowed to age (ACPA-750), after which it exhibited enhanced specific capacitance of 16.8 F/cm2 (622.2 F/g) at a current density 2.5 mA/cm2. ACPA-750//ACPA-750 device delivered maximum energy density of 1.66Wh/cm2 at a power density of 3 W/cm2. The device exhibited a coulombic efficiency of 96.1% and capacitance retention of 89% after 10,000 cycles.

Plasma-assisted surface modification of MXene/carbon nanofiber electrodes for electrochemical energy storage

Inferior ion diffusion and relatively low electrochemically active sites of MXene-based electrodes make them becoming a major challenge to develop advanced electrode. Surface modification of electrodes using non-thermal plasma is a great way to suppress these challenges through providing more space for energy storage and facilitating the diffusion of electrolyte ions. Herein, the effect of nitrogen and oxygen plasma treatments on MXene/carbon nanofiber electrode is reported to enhance the electrochemical performance. In this work, Ti3C2Tx MXene/CNF composites were fabricated using a hybrid needleless electrospinning/plasma method for the electrochemical energy storage. Surface modification of the composites was performed by a DBD plasma reactor under N2 and O2 gases at low-pressure glow discharge as a two-step plasma treatment process. The results revealed that total pore volume and the surface area of the plasma-treated Ti3C2Tx/CNF composite increased considerably due to the N2 and O2 plasma treatments. It was found that the electrochemical active surface area of the N2/O2-plasma-treated Ti3C2Tx/CNF electrode enhanced by approximately two times compared to the non-treated one, leading to the specific capacitance of 162 F/g at 1 A g−1 in a 2 M KOH electrolyte. The increase in electrochemical activity arises from separate doping of N2 and O2 plasma, which not only improves the pore structure and wettability, but also modifies the electrical conductivity and capacitance of the electrode. The N2/O2-plasma-treated Ti3C2Tx/CNF electrode achieved excellent cycling stability with 124 % capacitance retention after 10,000 cycles, while the capacitance retention of the pure N2 and O2-plasma-treated Ti3C2Tx/CNF electrodes as well as the non-treated one were 111 %, 105 % and 98 %, respectively. Additionally, an asymmetric supercapacitor N2/O2-plasma-treated Ti3C2Tx/CNF//AC based on the N2/O2-plasma-treated Ti3C2Tx/CNF as a positive electrode and activated carbon (AC) as a negative electrode was successfully constructed, which demonstrated an energy density of 26.3 Wh kg−1 with a power density of 750 W kg−1 at the current density of 1 A g−1 with excellent capacitance retention (102 %) after 5000 cycles. This work provides a highly efficient method for the surface modification of MXene-based electrodes through non-thermal plasma treatment.

Exploring the potential of metal tailored imine based covalent organic framework for asymmetric supercapacitor applications

Currently, a fascinating area of research involves the development of stable and efficient materials for energy storage systems. The current work describes the synthesis of imine linked covalent organic framework (COF) using 4,4′,4′',4′''-(ethene-1,1,2,2-tetrayl) tetraaniline and terephthalaldehyde (TAT-COF) as precursors through solvothermal method. In addition, cobalt has been integrated to the imine linkage of TAT-COF to generate CO@TAT-COF. The X-ray diffraction study reveals the formation of ordered and crystalline TAT-COF with eclipsed (AA) stacking configuration. Morphological characterization indicated the accumulation of metal species over stick like structured TAT-COF. Energy-dispersive X-ray (EDX) and Fourier Transform Infrared Spectroscopy results shows the successive intercalation of Co to the TAT-COF matrix. TAT-COF and Co@TAT-COF were examined towards electrochemical performance for supercapacitor applications. A two fold higher specific capacitance (Csp) was obtained in Co@TAT-COF (637 F/g) compared to TAT-COF (315 F/g) at 5 mV/s scan rate. The Co@TAT-COF showed an energy density (ED) of 58 Wh/kg at a power density of (PD) of 1500 W/kg. Enhanced electrochemical performance in Co@TAT-COF could be attributed to the structural confinement, conductivity, enhanced interlayer spacing and porosity. Co@TAT-COF has been used as positive electrode to fabricate an asymmetric device (ASD) in using Swagelok cell. The Csp of the fabricated ASD was found to be 95 F/g at 2 mV/s scan rate. ASD showed good stability with 73 % retention of Csp over 5000 charge/discharge cycles. The obtained results indicate the suitability of the engineered COFs towards energy storage devices.

An organic cathode integrating carbonyl and imino groups for high-performance aqueous zinc-ion battery with air self-charging ability

Air-self-charging aqueous zinc-ion batteries (AZIBs) are a promising system applied in some special occasions, where no external power source can be provided to recharge the battery. Here, a new π-conjugated aromatic compound 2,7,12-tri(4H-1,2,4-triazol-4-yl)-1H-pyrrolo [3,4-b]pyrrolo[3′,4′:5,6]pyrazino[2,3f]pyrrolo[3′,4′:5,6]pyrazi-no[2,3−h]quinoxaline-1,3,6,8,11,13(2H,7H,12H)-hexaone (THQH) is reported. Because THQH contains multiple redox-active groups (CN and CO) and its insolubility in 2 M ZnSO4, as the cathode material of flexible/coin-type AZIBs, it owns outstanding discharge specific capacity, higher-rate performance and longer cycle life. Various ex-situ experiments and theoretical calculation revealed H+ and Zn2+ participated in the THQH cathode reaction. Notably, as the discharged flexible Zn//THQH battery is exposed to air, it can be self-recharged via the redox reaction between oxygen in air and the discharged THQH cathode, along with H+ ions removal. The flexible Zn//THQH battery can deliver a discharge capacity of up to 566 mA h g−1 at 0.5 A g−1, a higher-rate capability and an excellent self-charging cycle stability (31 cycles) after exposed to air for 28 h, displaying an excellent reusability. This work paves a way for the development of high-performance flexible air self-charging AZIBs.

Interface stabilization strategy realizing low-temperature sodium storage in Sb anode prepared by ball milling method

Antimony (Sb) is an attractive anode material for sodium-ion batteries (SIBs) owing to its low operating potential, low cost, and high theoretical capacity. However, the large volume expansion of Sb during the Na alloying/dealloying process, which greatly limits its application in SIBs. Simultaneously, as the temperature decreases, the formation of a poor coating on the anode surface significantly increase the difficulty of Na+ transmission. Herein, Sb-graphite-NaF (SCF) ternary composites were prepared by an easy to operate and low-cost ball milling method, which significantly improved the cycling stability and extended to the operation temperature of Sb-base SIBs. A small amount of NaF induces the formation of an inorganic-dominated NaF-rich stable solid electrolyte interphase (SEI) on the Sb anode surface, which can cooperate with graphite to inhibit volume expansion of the Sb particles during sodium storage, enhance conductivity and accelerate Na+ diffusion at room and low temperatures. As a result, the SCF electrode with propylene carbonate-base electrolyte delivered a discharge capacity of 458.4 mAh g−1 after 160 cycles at 500 mA g−1 at 20 °C. When matched with diethylcarbonate-based electrolyte at −20 °C, it had a specific capacity of 299.8 mAh g−1 after 120 cycles and a capacity retention rate of 86.2 %. This study shows that the interface stabilization strategy with a suitable electrolyte can improve the cycling stability of anode materials, provide a new idea for constructing NaF-rich SEI, and a new approach for applying Sb-based materials in low-temperature SIBs.

Recycling of Spent Graphite from Lithium-Ion Batteries for Aqueous Zn Dual-Ion Batteries.

As lithium-ion batteries (LIBs) become more widespread, the number of spent LIBs gradually increases. Until now, recycling of spent LIBs has mainly concentrated on high-value cathodes, but the anode graphite has not yet attracted wide attention. In this work, spent graphite from LIBs was oxidized to graphene oxide and then thermally reduced to reduced graphene oxide (RGO), which serves as the cathode of aqueous Zn dual-ion batteries (ZDIBs). The thermal reduction process enables RGO with a large layer spacing and porous structure, which increase the anion insertion sites and transfer kinetics. As a result, the corresponding battery exhibits a high specific capacity of 96.82 mAh g-1 at 1 A g-1, superior rate capability, and a high capacity retention rate of 80% after 2000 cycles. Moreover, RGO gradually transforms into a long-range disordered structure during the cycling process, which provides more transport routes and active sites for anion insertion and thus leads to the increase of capacity. This work combines the recycling of spent graphite with aqueous ZDIBs, realizing the high-value use of spent graphite.

Insights of oxygen vacancies engineered structural, morphological, and electrochemical attributes of Cr-doped Co3O4 nanoparticles as redox active battery-type electrodes for hybrid supercapacitors

The global warming issue is spurring the development of renewable energy solutions, where supercapacitors are emerging as promising options for energy storage. Despite advancements in battery-type materials, doping is a practical approach to enhancing electrochemical performance. In this study, using the solution combustion method, we synthesized spinel Co3O4 nanoparticles doped with chromium (Cr) at 2.5 % and 5 % concentrations. The addition of Cr significantly modifies the structural, morphological, surface, and electrochemical properties of Co3O4 nanoparticles. Raman and X-ray photoelectron spectroscopy confirm that this doping method effectively regulates the oxygen vacancy defect level. Moreover, Cr dopants and oxygen vacancies modify electronic states, facilitating more accessible contact to active sites, improving electrical conductivity and more intricate redox chemistry. Notably, the 2.5 % Cr-doped Co3O4 configuration demonstrates substantially enhanced specific capacity (334.64 C g−1/92.95 mAh g−1 at 1 A g−1) and rate performance (59 %), surpassing those of 5 % Cr-doped Co3O4 and undoped Co3O4. Furthermore, the as-fabricated 2.5 % Cr-doped Co3O4//activated carbon (AC) hybrid supercapacitor (HSC) device exhibits a noteworthy energy density of 42.5 Wh kg−1 at 1295.73 W kg−1, withstanding 33.54 Wh kg−1 even at a power density of 5720.46 W kg−1. The HSC device showcases outstanding cyclic performance with 100 % capacity retention after 5000 cycles. Therefore, our work offers a viable way to improve the efficiency of hybrid supercapacitors by providing essential insights into the design of defect-engineered battery-type electrode materials.

Performance and catalytic mechanism of CNTs/Ti3C2Tx MXene composite cathode for air-breathing hybrid lithium-air batteries

Hybrid lithium-air batteries (HLABs) have not been widely used due to high overpotential, low cycling, slow kinetic rate, and poor cathode catalytic performance. CNTs/Ti3C2Tx MXene composite material was first used as a cathode for HLABs. The cycling performance of batteries equipped with composite cathodes with different mass ratios is tested in an air environment. It is found that when the mass ratio is mCNTs:mTi3C2TxMXene=1:1, the cycling performance of the battery is the best, reaching 405 cycles, i.e., 1620 h of cyclic charging and discharging under fixed capacity. In deep discharge testing, when the mass ratio of the composite cathode is mCNTs:mTi3C2TxMXene=1:1, the battery exhibits extremely high specific capacity, with a maximum value of 22,092.91 mAh/g. The first principles calculate the catalytic mechanism of Ti3C2Tx MXene as the catalyst for HLABs, and the adsorption energy of oxygen on the surface of Ti3C2Tx MXene and ORR processes is calculated. The experiments and calculations confirm that Ti3C2Tx MXene is suitable as a cathode catalyst for HLABs.

Hollow-structured and nano-flower shaped high entropy layer double hydroxide for superiority specific capacitance and rate capability of supercapacitor

High entropy hydroxide as electrode materials has been widely studied in the field of supercapacitors, but due to the limited active site and poor conductivity, it usually shows poor specific capacity and magnification performance, which seriously limit its development in the field of supercapacitors. In this work, a hollow-structured and nano-flower shaped high entropy layer double hydroxide was synthesized by the double template method combined with nano-etching to achieve superiority specific capacitance and rate capability of supercapacitor. The experimental and theoretical results indicate that the specific capacitance of this novel electrode material is as high as 1820.1 F·g−1. In particular, after the current density was increased by 40 times, the specific capacitance can reach 1140.2 F·g−1, and its electrochemical performance is higher than most of high entropy electrode materials reported so far. More importantly, the S-HE-LDH//AC HSC was constructed with the material as the electrode. It has an energy density of 74.2 Wh·kg−1 at 475 W·kg−1 power density. After 5000 cycles, the specific capacitance of the HSC device can still maintain 90.8 % of its initial value. These results indicate that the electrochemical properties of LDHs can be effectively improved by the combination of microstructure adjustment and electronic structure optimization.

Superior performance of asymmetric supercapacitor based on Cu doped bismuth ferrite electrode

Electrochemical energy storage devices, like supercapacitors and batteries, are needed to meet the constantly increasing demands of portable energy devices. Many types of supercapacitor electrodes were synthesized and reported which include carbon-based materials, polymers, oxides and perovskites. In this work, we report on the fabrication of Cu doped bismuth ferrite (Cu-BiFeO3, Cu-BFO) nanoparticles via sol-gel procedure. In most of the doping cases the costly rare earth elements like La, Nd, Sm, Ce and Yb are used to replace Bi. Electrodes of Bi1-xCuxFeO3 where x have the values 0.0, 0.025, 0.05, 0.075, 0.1 and 0.15 were deposited on graphitic sheets. Optimum Cu doping value was found to be at x = 0.05. Cu2+ ions doping in place of Bi3+ ions will reveal the roles of oxygen vacancies, as determined from XPS. The estimated values of specific capacitance was found to be 732 F/g at 0.5 A/g for the electrode at x = 0.05 in three electrode system. 5%Cu-BFO//Carbon black asymmetric supercapacitor (ASC) device can be charged and discharged reversibly at cell voltage of 0.0 up to 1.5 V when using a 0.5 M Na2SO4 aqueous electrolyte. This configuration allows the ASC device to deliver a great energy density of 37.25 Wh/kg at a power density of 752 W/kg. The ASC device demonstrates excellent cycling stability, retaining 88.64 % of its initial specific capacitance after 5000 cycles. Increasing the Cu content up to 15 % causes instability in the crystal structure of BFO resulting on phase segregation into Bi2Fe4O9 along with BFO and deterioration in the electrode overall performance. XPS showed that replacement of Cu2+ in place of Bi3+ disturbs the neutrality and the chemical environment of the compound. Hence to achieve neutrality and ionic balance, oxygen vacancies increase and the Fe2+/Fe3+ ratio increases as well. Both oxygen vacancies and the change in the Fe ions ratio reduce electrochemical impedance and give rise to charge density. The homogenous distribution of the pores at x = 0.05 contributed greatly to its fast electrolyte ion diffusion that improved the observed capacitive properties. One has to mention here, that despite doping that contains ions with different ionic size and/or different oxidation state is unfavorable, to some extent, due to the changes they produce in the electronic structure and the chemical environment, nevertheless it is sometimes beneficial in creating new parameters in the structure that promote specific application like in the case of the current work, oxygen vacancies, increase in surface area and the mixed state valency.

LaMnO3-Mn3O4 nanocomposite: Synergetic effect towards high electrochemical performance

Metal oxides have been a focus of research for energy storage devices. Herein, xLaMnO3 – (100-x) Mn3O4 (LMO-MO) composites (xwt%: 100, 90, 70, and 50) were prepared via one-pot synthesis to elucidate the synergistic effect of the composite constituents on composite’s electrochemical performance. The X-ray diffraction analysis confirmed the presence of individual compounds in the desired ratio and phase. The X-ray photoelectron spectroscopy confirmed the presence of Mn2+ and Mn3+ oxidation states, indicating the presence of both LaMnO3 (LMO) and Mn3O4 (MO) in the composite. The electrochemical performance of composite electrodes prepared using nickel foam was assessed in 1 and 6 M KOH solutions. High specific capacitance measured via cyclic voltammetry of ∼ 770 Fg−1 at a scan rate of 1 mVs−1 was recorded for the composite of LMO-MO (70 %: 30 %) in 6 M KOH. At the same time, charge-discharge curves revealed a maximum specific capacitance of around 405 Fg−1 for an x =70 % sample at a current density of 0.5 Ag−1. The EIS studies show a reduction in the internal resistance of the composite due to the interconnected structure and reversible faradic process at the interface with a high degree of Coulombic efficiency. A higher overall electrochemical performance of the electrode was recorded in a 6 M KOH electrolyte. The enhanced electrochemical performance of the composite is attributed to efficient charge transfer kinetics through the electrode-electrolyte interface via easy electron hopping pathways between LMO and MO in the composite. These findings suggest that the studied LMO-MO composites could be a potential material for pseudocapacitor energy devices.

Dual optimization of LiFePO4 cathode performance using manganese substitution and a hybrid lithiated Nafion-modified PEDOT:PSS coating layer for lithium-ion batteries

The energy storage market necessitates an increase in the specific capacity of battery materials, particularly cathodes, to meet growing demands. Manganese (Mn) substitution of lithium iron phosphate (LFP) cathodes presents a promising avenue, offering high specific capacity and operability at elevated voltages. However, during cycling, the dissolution of Fe/Mn ions into the electrolyte leads to capacity fading. In this study, we enhance the specific capacity of LFP by Mn substitution in the iron position at various ratios (0.1, 0.2, 0.3, and 0.4). LiFe0.6Mn0.4PO4 exhibits the highest capacity of 159.1 mAh g-1 at 0.1C with an initial Coulombic efficiency of 97.9 %. This improvement stems from an enhanced lithium diffusion coefficient, increasing from 1.86 × 10–14 cm2 s-1 for pristine LFP to 2.46 × 10–12 cm2 s-1 for LiFe0.6Mn0.4PO4. However, LiFe0.6Mn0.4PO4 demonstrates the poorest capacity retention among the substituted samples, reaching 78.4 % over 100 cycles due to severe Fe/Mn ion dissolution. To address this issue, we coat Mn-substituted LFP with poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) and lithiated Nafion (LN) polymer, which offer high electronic and lithium-ion conductivity, respectively. This coating layer enhances the capacity retention of LiFe0.6Mn0.4PO4 to 90.1 % at 0.2C after 100 cycles, effectively mitigating active material loss during charge-discharge processes. This study demonstrates that PEDOT:PSS-LN can improve the electronic and ionic conductivity of cathode materials and maintain high capacity retention during cycling.

Superior initiator reactivity and electrochemical properties of In(OTf)3 over Sn(OTf)2 for 1,3-dioxolane based solid polymer electrolyte

The in-situ polymerization of 1,3-dioxolane (PDOL) in battery cells has attracted extensive attention, however, the differences of Lewis acid initiators on the DOL monomer conversion (C%) and electrochemical properties has been ignored. Here, it is demonstrated that compare with Sn(OTf)2 Lewis acid initiator, the gelation of DOL is achieved at the lower addition of In(OTf)3. By optimizing their content in the gelation process, their C% are comparable which are 95.7 % and 93.5 % for In(OTf)3 and Sn(OTf)2, respectively. However, the higher ionic conductivity (7.1 × 10−4 S cm−1 at room temperature), electrochemical window (~4.5 V) and Li+ transference number (0.42) are obtained for DOL initiated with In(OTf)3, due to its lower molecular weight which is helpful to the intermolecular Li+ transport along PDOL main chain; In addition, the Li/Li symmetrical cell of In(OTf)3 can be stably cycled for >500 h at 3 mA cm−2, with an over-potential of 178mv. The storage and cycling impedances of half cells further proves the stable interface of In(OTf)3 initiated DOL toward to lithium metal in comparison with those of Sn(OTf)2. Scanning electron microscopy results show a denser and thinner interface in the DOL catalyzed by In(OTf)3. Finally, the assembled Li/LiFePO4 battery delivers specific discharge capacity and capacity retention rates of 115.5mAh g−1 and 85 %, respectively after 300 cycles at 1C. Through the initiator selection, the DOL synthesis and electrochemical properties can be tuned, which further broadens the design idea of PDOL based solid polymer electrolyte.

Facile synthesis of MWCNT hexagonal needles grown on interconnected honeycombs like MnCo2O4/MnO2 nanoporous electrode for high-performance asymmetric supercapacitor

The construction of a honeycomb-like structure composed of MnCo2O4/MnO2was effectively achieved using a combination of hydrothermal processing and heat treatment. The whole surface of the MnCo2O4/MnO2 honeycomb is coated with neatly arranged hexagonal nano needles made of MWCNT, leading to a substantial enhancement in the specific surface area. At 1 A/g, the supercapacitor electrode composed of MnCo2O4/MnO2@MWCNT composite exhibited an exceptional specific capacitance of around 1539 F/g. Furthermore, it maintained approximately 95.5 % of its capacity even after undergoing 10,000 cycles. The asymmetric capacitor device, with MnCo2O4/MnO2@MWCNT and AC electrode, has a power density of 1537.8 W kg−1 and an energy density of 48.78 Wh kg−1. The MnCo2O4/MnO2composite exhibits exceptional rate performance, significant capacitance, and excellent cycle performance due to the synergistic effect between MnCo2O4/MnO2 and MWCNT, as well as the high specific surface area and unique structure. Consequently, it presents a viable option for the advancement of high-efficiency electrochemical super capacitors in the next generation.

High cycling stability polyaniline/carbon sphere/graphene ternary nanocomposite cathode material for asymmetric supercapacitors

Here, an asymmetric supercapacitor of the ternary nanocomposite polyaniline/carbon sphere/graphene (PANI/CS/G) is developed through a green strategy via the in-situ polymerization of aniline in carbon sphere/graphene (CS/G) dispersion prepared in a ball-mill method coupled with hydrothermal treatment. A strong interaction and thus the coverage of CS/G with PANI is revealed from the material characterization using XRD, FTIR and Raman spectroscopic techniques, and also from FESEM and HRTEM images. Uniform distribution of PANI over the CS/G provided an effective conducting network and enhanced diffusion of the electrolyte ions. PANI/CS/G showed a specific capacitance of 145.02 mF/cm2 at a current density of 1 mA/cm2 in 1 M H2SO4 originating from the electrostatic double layer capacitance behavior of the CS/G and pseudocapacitance of PANI. The fabricated asymmetric coin cell device with PANI/CS/G cathode and CS/G anode showed the highest areal capacitance of 320.78 mF/cm2 (@ 1 mA/cm2), a maximum energy density of 18.99 Wh/kg (@ 0.21 A/g), and a highest power density of 6088.48 W/kg (@ 8.68 A/g). The device displayed 101.6 % capacitance retention after 10000 cycles, indicating the effect of CS/G in diminishing the volume changes of PANI during the charge-discharge process, which usually affects the cyclic stability. By lighting a green LED, the real sense energy storage application of the supercapacitor is evaluated.

Wet-chemical synthesized TiN-CuO nanocomposite: Advancing supercapacitor technology with high energy and power density

Modern-era energy crises have arisen as a result of industry's quick expansion. There must be a proliferation of autonomous, renewable-energy-powered, high-capacity storage systems. The high specific capacitance (Cs) is a result of the Electric Double Layered Capacitors (EDLC's) stellar cathode characteristics. The remarkable conductivity and storage capacity of transition metal nitride-based oxides (TMOs) have made them an attractive option for use as cathode materials in SC devices. The present study successfully synthesized the TiN-CuO composite for electrode material by employing the straightforward wet-chemical method. But the fact that the TiN-CuO combination is crystalline suggests it could be used as an electrode in SCs. The electrochemical performance of the TiN-CuO electrode was also highlighted by its excellent Cs of 843.5 F g−1. Furthermore, the TiN-CuO‖MnO2-KOH electrode displays a power density (Pd) of 17595 W/kg and an energy density (Ed) of 44.88 Wh kg−1. In addition, the TiN-CuO‖MnO2-KOH electrode has shown remarkable cyclic stability of 97.3 % up to 10,000 cycles, at 10 A g−1. The electrochemical characteristics of fabricated TiN-CuO electrode material are superior to those of pure materials, rendering it an attractive candidate for use in energy storage devices such as SCs.

Se-doped cobalt-nickel sulfide hollow nanospheres with heterostructure and engineered defects as high-performance electrode for supercapacitors

Porous structures with heterogeneous interfaces and defects are an important way to enhance electrochemically active sites and facilitate electron transfer, while also improving the permeability of the electrolyte and the rate of ion transport. In this study, Se-doped cobalt-nickel sulfide (Se-CoNi2S4) hollow nanospheres with heterostructure and defects were prepared from CoNi metal-organic framework (MOF) as substrate by sequential sulfidation and selenization treatments. Notably, the hollow structure not only offers additional ion transport channels to promote rapid transfer of ions in the electrolyte but also provides an increased number of electrochemically active sites. The morphology and electrochemical performance of Se-CoNi2S4 nanospheres with different levels of Se doping were compared. From the results, Se doping not only enhances the conductivity of CoNi2S4 but also increases its charge storage capacity. As an electrode material, the synthesized Se-CoNi2S4 composite that was synthesized demonstrated a notable specific capacitance of 1260 F g−1 at 1 A g−1. Additionally, when Se-CoNi2S4 was utilized as the anode and activated carbon served as the cathode in an asymmetric supercapacitor, it achieved an energy density of 44.6 Wh kg−1 at a power density of 827 W kg−1. After undergoing 10,000 cycles, this device demonstrated exceptional cycling stability, retaining 80.2 % of its initial capacitance. Therefore, the synthesized electrode material Se-CoNi2S4 has significant potential for energy storage applications.

Facile synthesis of novel cobalt molybdenum sulfide-graphitic carbon nitride (CoMoS4/g-C3N4) nanocomposite electrode for improved supercapacitor and photocatalytic applications

Supercapacitors have gained significant attention from scientists due to their wide range of applications in energy storage devices. However, searching for abundant and eco-friendly materials on earth is still necessary while preserving their outstanding performance. Herein, cobalt molybdenum sulfide-graphitic carbon nitride (CoMoS4/g-C3N4) nanocomposite was synthesized to explore an exceptional electrode material for energy and photocatalytic applications. The structural analysis, vibrational modes, and porosity within the CoMoS4/g-C3N4 nanocomposite were studied by XRD, Raman, and SEM. The direct energy band gap decreased from 2.54 to 2.44 eV along with the increased ratio of CoMoS4 in the nanocomposite. The electrochemical measurements of CoMoS4/g-C3N4 nanocomposite exhibited an excellent specific capacitance (Cp) of 3675 F/g at 1 mV/s and 3150 F/g at 2.5 A/g with noticeable specific energy density (Eg) of 109.4 Wh/kg, high power density (Pd) of 625 W/kg and retain high capacitance (88 % of its initial value) even after 4000 cycles. Furthermore, the photocatalytic results revealed that high photodegradation efficiency (97.85 %) was attained against methyl orange (MO) dye under UV light irradiation. Prepared electrode materials are promising materials for next-generation energy storage and environmental applications.

Ta-ions doping impact on structural modifications and bandgap tuning of NiCo2O4 hexagonal nanosheets for high rated pseudocapacitor electrodes

Getting higher activity, lower cost and especially better stability at the same time is still one of the biggest problems in the supercapacitors research. Morphology tailoring and crystal imperfections induce d due to doping based defects in ternary transition metal oxides at the nano-scale level is crucial for enhancing the performance of supercapacitors. This research investigates of the utilization of Ta-doped NiCo2O4 (Ta-NCO) hexagonal nano-sheets for supercapacitor electrodes. The structural and morphological study of pristine and Ta-doped samples has been determined using XRD, SEM, TEM and HRTEM. The enhanced inherent conductivity and diffusion at the interface are also confirmed using electrochemical measurements study. The NCO-5 material exhibits a notable enhancement in capacitance and cycling retention. The NCO-5 electrode demonstrates a high specific capacitance (Cs) of 2445.7 F/g at 1 A/g. The pseudocapacitive behavior by power law (b = 0.67) and an increase in capacitive contribution with the scan rate reaching a value of 47.2 % at 100 mV/s by Dunn method exhibits it suitability of pseudocapacitors. The low Rct value signifies it improved capacitive performance as deduced from EIS measurements. Crucially, it maintains around 95.3 % of its capacitance after undergoing 10,000 GCD cycles. The high specific capacitance, remarkable capacitive characteristics and high stability of NCO-5 make it an excellent contestant for supercapacitor applications. The fabricated asymmetric supercapacitor (NCO-5//AC) shows exceptional energy density (ED) of 96.35 Wh/kg with power density (PD) of 825.03 W/kg.