Spatially Coupled Low-density Parity-check Research Articles

Coded Random Access with Distributed Power Control and Multiple-Packet Reception

In this letter, a spatially-coupled low-density parity- check (SC-LDPC) coded ALOHA system with multiuser detection (MUD)-based multiple packet reception (MPR) is studied. A distributed power control scheme based on multiple power levels is proposed for medium and high rate applications. Numerical results show that the proposed scheme can provide noticeable throughput improvement. This improvement is more significant in the cases of fading channels.

Performance Comparison of LDPC Block and Spatially Coupled Codes Over GF <inline-formula> <tex-math notation="TeX">$(q)$</tex-math></inline-formula>

In this paper, we compare the finite-length performance of protograph-based spatially coupled low-density parity-check (SC-LDPC) codes and LDPC block codes (LDPC-BCs) over GF(q). In order to reduce computational complexity and latency, a sliding window decoder with a stopping rule based on a soft bit-error-rate (BER) estimate is used for the q-ary SC-LDPC codes. Two regimes are considered: one when the constraint length of q-ary SC-LDPC codes is equal to the block length of q-ary LDPC-BCs and the other when the two decoding latencies are equal. Simulation results confirm that, in both regimes, (3,6)-, (3,9)-, and (3,12)-regular non-binary SC-LDPC codes can significantly outperform both binary and non-binary LDPC-BCs and binary SC-LDPC codes. Finally, we present a computational complexity comparison of q-ary SC-LDPC codes and q-ary LDPC-BCs under equal decoding latency and equal decoding performance assumptions.

Threshold Saturation for Spatially Coupled LDPC and LDGM Codes on BMS Channels

Spatially-coupled low-density parity-check (LDPC) codes, which were first introduced as LDPC convolutional codes, have been shown to exhibit excellent performance under low-complexity belief-propagation decoding. This phenomenon is now termed threshold saturation via spatial coupling. Spatially-coupled codes have been successfully applied in numerous areas. In particular, it was proven that spatially-coupled regular LDPC codes universally achieve capacity over the class of binary memoryless symmetric (BMS) channels under belief-propagation decoding. Recently, potential functions have been used to simplify threshold saturation proofs for scalar and vector recursions. In this paper, potential functions are used to prove threshold saturation for irregular LDPC and low-density generator-matrix (LDGM) codes on BMS channels, extending the simplified proof technique to BMS channels. The corresponding potential functions are closely related to the average Bethe free entropy of the ensembles in the large-system limit. These functions also appear in statistical physics when the replica method is used to analyze optimal decoding.

Memory‐efficient quasi‐cyclic spatially coupled low‐density parity‐check and repeat‐accumulate codes

The authors propose the construction of spatially coupled low-density parity-check (SC-LDPC) codes using a periodic time-variant quasi-cyclic (QC) algorithm. The QC-based approach is optimised to obtain memory efficiency in storing the parity-check matrix in the decoders. A hardware model of the parity-check storage units has been designed for a Xilinx field-programmable gate array (FPGA), to compare the logic and memory requirements for various approaches. It is shown that the proposed QC SC-LDPC code (with optimisation) can be stored with reasonable logic resources and without the need of block memory in the FPGA. In addition, a significant improvement in the processing speed is also achieved. This study also proposes a new QC algorithm for constructing spatially coupled repeat-accumulate (SC-RA) codes. The proposed construction reduces the implementation complexity of the encoder and subsequently saves significant computational resources required for storing and accessing the circulants in the decoder. The performance of the proposed code is also compared with the standard RA codes through simulations.

Spatially-Coupled LDPC Codes for Decode-and-Forward Relaying of Two Correlated Sources over the BEC

We present a decode-and-forward transmission scheme based on spatially-coupled low-density parity-check (SC-LDPC) codes for a network consisting of two (possibly correlated) sources, one relay, and one destination. The links between the nodes are modeled as binary erasure channels. Joint source-channel coding with joint channel decoding is used to exploit the correlation. The relay performs network coding. We derive analytical bounds on the achievable rates for the binary erasure time-division multiple-access relay channel with correlated sources. We then design bilayer SC-LDPC codes and analyze their asymptotic performance for this scenario. We prove analytically that the proposed coding scheme achieves the theoretical limit for symmetric channel conditions and uncorrelated sources. Using density evolution, we furthermore demonstrate that our scheme approaches the theoretical limit also for non-symmetric channel conditions and when the sources are correlated, and we observe the threshold saturation effect that is typical for spatially-coupled systems. Finally, we give simulation results for large block lengths, which validate the DE analysis.

Spatially‐coupled communication system for the correlated erasure channel

Low implementation complexity, low delay and close-to-optimal performance over a wide variety of channels are some of the advantages of spatially-coupled low-density parity-check (LDPC) codes. However, the error performance of the sliding window decoding scheme that is used to decode these codes is considerably degraded over channels with memory, such as the correlated erasure channel. Employing a block interleaver to encounter this situation is not always a viable option, since it introduces a large amount of delay and cancels out the low-delay property of the sliding window decoder. Another way to reduce the effects of erasure bursts is to construct a more robust code ensemble by presenting additional code design rules. However, this approach results in additional constraints on the already complicated code construction process. The authors propose a novel communication system that combats the effects of the erasure bursts through the use of a convolutional interleaver. The proposed system combines the inherent convolutional nature of the spatially-coupled LDPC codes with that of a convolutional interleaver to achieve very low overall delay. The performance of the proposed approach is analysed using the density evolution technique and the performance improvement is demonstrated as a function of the interleaving delay via computer simulations.

Spatially Coupled Protograph-Based LDPC Codes for Decode-and-Forward in Erasure Relay Channel

We consider spatially-coupled protograph-based LDPC codes for the three terminal erasure relay channel. It is observed that BP threshold value, the maximal erasure probability of the channel for which decoding error probability converges to zero, of spatially-coupled codes, in particular spatially-coupled MacKay-Neal code, is close to the theoretical limit for the relay channel. Empirical results suggest that spatially-coupled protograph-based LDPC codes have great potential to achieve theoretical limit of a general relay channel.

Spatially-Coupled MacKay-Neal Codes and Hsu-Anastasopoulos Codes

Kudekar et al. recently proved that for transmission over the binary erasure channel (BEC), spatial coupling of LDPC codes increases the BP threshold of the coupled ensemble to the MAP threshold of the underlying LDPC codes. One major drawback of the capacity-achieving spatially-coupled LDPC codes is that one needs to increase the column and row weight of parity-check matrices of the underlying LDPC codes. It is proved, that Hsu-Anastasopoulos (HA) codes and MacKay-Neal (MN) codes achieve the capacity of memoryless binary-input symmetric-output channels under MAP decoding with bounded column and row weight of the parity-check matrices. The HA codes and the MN codes are dual codes each other. The aim of this paper is to present an empirical evidence that spatially-coupled MN (resp. HA) codes with bounded column and row weight achieve the capacity of the BEC. To this end, we introduce a spatial coupling scheme of MN (resp. HA) codes. By density evolution analysis, we will show that the resulting spatially-coupled MN (resp. HA) codes have the BP threshold close to the Shannon limit.