Spatial Frequency Laser-induced Periodic Surface Structures Research Articles

Fabrication of grooves on 4H–SiC using femtosecond laser vector beam

Fabrication of grooves on 4H–SiC using femtosecond laser vector beam

Point defect distributions in ultrafast laser-induced periodic surface structures on β-Ga2O3

β-Ga2O3 has received widespread attention due to its ultrawide bandgap, which potentially permits applications in extreme conditions. Ultrafast laser irradiation of β-Ga2O3 provides a means for exploring the response of the material under such conditions, which could result in the generation of point defects as well as a localized modification of structural features that could yield properties that differ from the pristine surface. However, an understanding of defects generated by femtosecond laser irradiation in the vicinity of laser-induced periodic surface structures (LIPSS) remains to be explored. We correlate topographic features with optical and electronic properties by combining near-nm scale resolution cathodoluminescence with Kelvin probe force microscopy. Defects are found to correlate with crystalline order and near-surface morphology, as well as changes in work function. They are also suggested to be closely related to the formation of high spatial frequency LIPSS. These results suggest a need for precise tuning of laser irradiation conditions as well as possible post-processing to control defects in future Ga2O3 devices.

Efficient fabrication of high-quality hybrid periodic nanostructures on 4H-SiC using a single-step vector femtosecond laser processing

Efficient fabrication of high-quality hybrid periodic nanostructures on 4H-SiC using a single-step vector femtosecond laser processing

Investigating the transition from high to low spatial frequency periodic nanoripples on TiO2 (0 0 1) oriented surface upon irradiation with UV-femtosecond pulses

Investigating the transition from high to low spatial frequency periodic nanoripples on TiO2 (0 0 1) oriented surface upon irradiation with UV-femtosecond pulses

Impact of Hybrid Electromagnetic Surface Modes on the Formation of Low Spatial Frequency LIPSS: A Universal Approach

AbstractIn this article, the impact of the excited electromagnetic surface modes in a comprehensive investigation of the formation of laser‐induced periodic surface structures (LIPSS) is analyzed. It is demonstrated that the electromagnetic origin of low spatial‐frequency LIPSS (LSFL) is the frequency detuning between propagating and localized modes due to their coupling/hybridization. The influence of the pattern profile, inhomogeneity, and material type on the coupling strength, electric‐field spatial distribution, and associated near‐field scattering are highlighted. Exploiting the potential of the approach, evidence of a universal manifestation of LSFLs is provided irrespective of the material and the authors are able to predict and validate the experimentally‐proven lower limit of LSFL periodicity (i.e., λL/2, where λL stands for the laser wavelength). Furthermore, the analysis of the electromagnetic modes predicts that the periodicity of LSFL is practically unaffected by the laser fluence, while a suppression of LSFL at high excitation levels or large number of pulses is also predicted. It is also shown that plasmonic‐active materials are not necessary for LSFL formation perpendicular to polarization. Toward these directions, an important generic metric, namely the resonance quality factor, is additionally inserted. The approach can, thus, serve as a guide for controlling laser‐induced surface topography.

Formation and modulation of multi-pulse femtosecond laser-induced periodic surface structures by electromagnetic and partial differential equation simulations.

In order to demonstrate the formation of laser-induced periodic surface structures (LIPSS), simulations were performed to investigate the effect of multiple femtosecond laser pulses with different laser energy densities on a Ti6Al4V surface. In this work, a set of partial differential equations calculating the electron and lattice temperature variations, followed by coupling with an electric field, is used to analyze the evolution of the periodic surface structure induced by the interaction of the femtosecond laser with the material. As the number of pulses increases, the surface structure of the material changes from none to produce LIPSS structure and from low spatial frequency LIPSS (LSFL) structure to high spatial frequency LIPSS (HSFL) structure. In order to compare the results, single-point laser scanning ablation experiments were carried out at femtosecond laser energy. The experimental results are consistent with the simulation results.

Femtosecond IR and UV laser induced periodic structures on steel and copper surfaces

Femtosecond IR and UV laser induced periodic structures on steel and copper surfaces

Femtosecond Bessel beam induced ladder-like LIPSS on trimetallic surface for SERS-based sensing of Tetryl and PETN

Femtosecond Bessel beam induced ladder-like LIPSS on trimetallic surface for SERS-based sensing of Tetryl and PETN

Femtosecond laser structuring in the fabrication of periodic nanostructure on titanium for enhanced photoelectrochemical dopamine sensing performance

Femtosecond laser structuring in the fabrication of periodic nanostructure on titanium for enhanced photoelectrochemical dopamine sensing performance

Femtosecond Laser-Induced Periodic Surface Structures in Titanium-Doped Diamond-like Nanocomposite Films: Effects of the Beam Polarization Rotation.

We study the properties of laser-induced periodic surface structures (LIPSS) formed on titanium-doped diamond-like nanocomposite (DLN) a-C:H:Si:O films during ablation processing with linearly-polarized beams of a visible femtosecond laser (wavelength 515 nm, pulse duration 320 fs, pulse repetition rates 100 kHz-2 MHz, scanning beam velocity 0.05-1 m/s). The studies are focused on (i) laser ablation characteristics of Ti-DLN films at different pulse frequencies and constant fluence close to the ablation threshold, (ii) effects of the polarization angle rotation on the properties of low spatial frequency LIPSS (LSFL), and (iii) nanofriction properties of the 'rotating' LIPSS using atomic force microscopy (AFM) in a lateral force mode. It is found that (i) all LSFL are oriented perpendicular to the beam polarization direction, so being rotated with the beam polarization, and (ii) LSFL periods are gradually changed from 360 ± 5 nm for ripples parallel to the beam scanning direction to 420 ± 10 nm for ripples formed perpendicular to the beam scanning. The obtained results are discussed in the frame of the surface plasmon polaritons model of the LIPSS formation. Also, the findings of the nanoscale friction behavior, dependent on the LIPSS orientation relative to the AFM tip scanning direction, are presented and discussed.

Laser ablation of RB-SiC composite by femtosecond laser irradiation

Laser ablation of RB-SiC composite by femtosecond laser irradiation

Femtosecond laser-induced periodic surface structures on diamond-like nanocomposite films

We study the formation of laser-induced periodic surface structures (LIPSS) on diamond-like nanocomposite (DLN) a-C:H:Si:O films and titanium-doped DLN films during femtosecond (fs) laser ablation processing with linearly-polarized beams of IR and visible fs-lasers (wavelengths 1030 nm and 515 nm, pulse duration 320 fs, pulse repetition rates 100 kHz-2 MHz, scanning beam velocity 0.04–0.4 m/s). The studies are focused on (i) comparison of high spatial frequency LIPSS (HSFL) and low spatial frequency LIPSS (LSFL) formed on DLN and Ti-DLN films by IR fs-laser processing, (ii) effects of the pulse repetition rate on the parameters of LIPSS formed on the DLN and Ti-DLN films, (iii) Raman spectroscopy analysis of the LIPSS-structured films with application for ultrathin surface graphitization, and (iv) relationship between the fs-laser-induced surface graphitization and LIPSS formation on the films. A variety of the HSFL and LSFL have been produced on the surface of DLN and Ti-DLN films, with all the LIPSS being oriented perpendicular to the beam polarization direction. The HSFL periods are varied from ~80 to 240 nm and the LSFL periods are varied from 355 to 840 nm, depending on the fs-laser irradiation conditions (wavelength, fluence, pulse repetition rate) and films properties. Various plasmonic effects such as the superposition of the HSFL and LSFL and emergence of very unusual sinusoid-like structures on the DLN and Ti-DLN films are presented and discussed. • LIPSS fabrication on DLN and Ti-DLN films with IR and visible femtosecond lasers • Effect of surface graphitization on HSFL and LSFL formation thresholds • Raman analysis of ultrathin surface graphitization on LIPSS-structured DLN films • Influence of pulse repetition rate on fs-laser ablation and LIPSS parameters • Plasmonic effects in the fs-LIPSS formation on diamond-like nanocomposite films

Influence of Heat Accumulation on Morphology Debris Deposition and Wetting of LIPSS on Steel upon High Repetition Rate Femtosecond Pulses Irradiation

The fabrication of laser-induced periodic surface structures (LIPSS) over extended areas at high processing speeds requires the use of high repetition rate femtosecond lasers. It is known that industrially relevant materials such as steel experience heat accumulation when irradiated at repetition rates above some hundreds of kHz, and significant debris redeposition can take place. However, there are few studies on how the laser repetition rate influences both the debris deposition and the final LIPSS morphology. In this work, we present a study of fs laser-induced fabrication of low spatial frequency LIPSS (LSFL), with pulse repetition rates ranging from 10 kHz to 2 MHz on commercially available steel. The morphology of the laser-structured areas as well as the redeposited debris was characterized by scanning electron microscopy (SEM) and µ-Raman spectroscopy. To identify repetition rate ranges where heat accumulation is present during the irradiations, we developed a simple heat accumulation model that solves the heat equation in 1 dimension implementing a Forward differencing in Time and Central differencing in Space (FTCS) scheme. Contact angle measurements with water demonstrated the influence of heat accumulation and debris on the functional wetting behavior. The findings are directly relevant for the processing of metals using high repetition rate femtosecond lasers, enabling the identification of optimum conditions in terms of desired morphology, functionality, and throughput.

Regular Periodic Surface Structures on Indium Tin Oxide Film Efficiently Fabricated by Femtosecond Laser Direct Writing with a Cylindrical Lens.

Regular laser-induced periodic surface structures (LIPSS) were efficiently fabricated on indium tin oxide (ITO) films by femtosecond laser direct writing with a cylindrical lens. It was found that randomly distributed nanoparticles and high spatial frequency LIPSSs (HSFL) formed on the surface after a small number of cumulative incident laser pulses per spot, and regular low spatial frequency LIPSSs (LSFL) appeared when more laser pulses accumulated. The mechanism of the transition was studied by real-time absorptance measurement and theoretical simulation. Results show that the interference between incident laser and surface plasmon polaritons (SPPs) excited by random surface scatterers facilitates the formation of prototype LSFLs, which in turn enhances light absorption and SPP excitation following laser pulses. The effects of scanning velocity and laser fluence on LSFL quality were discussed in detail. Moreover, large-area extremely regular LSFL with a diameter of 30 mm were efficiently fabricated on an ITO film by femtosecond laser direct writing with the cylindrical lens. The fabricated LSFLs on the ITO film demonstrate vivid structural color. During LSFL processing, the decrease of ITO film thickness leads to the increase of near-infrared optical transmittance.

Formation of Nano- and Micro-Scale Surface Features Induced by Long-Range Femtosecond Filament Laser Ablation.

In this work, we study the characteristics of femtosecond-filament-laser–matter interactions and laser-induced periodic surface structures (LIPSS) at a beam-propagation distance up to 55 m. The quantification of the periodicity of filament-induced self-organized surface structures was accomplished by SEM and AFM measurements combined with the use of discrete two-dimensional fast Fourier transform (2D-FFT) analysis, at different filament propagation distances. The results show that the size of the nano-scale surface features increased with ongoing laser filament processing and, further, periodic ripples started to form in the ablation-spot center after irradiation with five spatially overlapping pulses. The effective number of irradiating filament pulses per spot area affected the developing surface texture, with the period of the low spatial frequency LIPSS reducing notably at a high pulse number. The high regularity of the filament-induced ripples was verified by the demonstration of the angle-of-incidence-dependent diffraction of sunlight. This work underlines the potential of long-range femtosecond filamentation for energy delivery at remote distances, with suppressed diffraction and long depth focus, which can be used in biomimetic laser surface engineering and remote-sensing applications.

Fractal Dimension and Texture Analysis in the Assessment of Experimental Laser-Induced Periodic Surface Structures (LIPSS) Dental Implant Surface-In Vitro Study Preliminary Report.

Laser-induced periodic surface structures (LIPSS) are the sub-wavelength periodic nanostructures generated by the femtosecond laser. Implant topography and its nanostructural changes can be important for biomedical applications. In order to compare the surface topography of different implants, appropriate mathematical and physical descriptive methods should be provided. The aim of the study was to evaluate the experimental LIPSS-based—Low Spatial Frequency LIPSS (LSFL) dental implant surfaces. Novel methods of surface analysis, such as Fractal Dimension Analysis and Texture Analysis, were compared to the standard surface roughness evaluation. Secondary, cell viability, and attachment tests were applied in order to evaluate the biological properties of the new titanium surface and to compare their correlation with the physical properties of the new surfaces. A Normal Human Dermal Fibroblast (NHDF) cytotoxicity test did not show an impact on the vitality of the cells. Our study has shown that the laser LIPSS implant surface modifications significantly improved the cell adhesion to the tested surfaces. We observed a strong correlation of adhesion and the growth of cells on the tested surface, with an increase in implant surface roughness with the best results for the moderately rough (2 μm) surfaces. Texture and fractal dimension analyses are promising methods to evaluate dental implants with complex geometry.

Electromagnetic origin of femtosecond laser-induced periodic surface structures on GaP crystals.

The formations of different types of laser-induced periodic surface structures (LIPSS) on the surface of GaP crystals with different laser fluence are researched in experiments. The transition from the high spatial frequency LIPSS (HSFL) to the low spatial frequency LIPSS (LSFL) occurred as the number of the irradiated laser pulse increased. The finite difference time domain method combined with the holographic ablation model is used to simulate the LIPSS formation under the irradiation of multiple pulses. Different types of ripples are predicted by the electromagnetic approach. Results demonstrate that the electromagnetic origins of HSFL and LSFL are due to the interference of incident field and the scattering field under the multi-pulse irradiation.

LIPSS Applied to Wide Bandgap Semiconductors and Dielectrics: Assessment and Future Perspectives.

With the aim of presenting the processes governing the Laser-Induced Periodic Surface Structures (LIPSS), its main theoretical models have been reported. More emphasis is given to those suitable for clarifying the experimental structures observed on the surface of wide bandgap semiconductors (WBS) and dielectric materials. The role played by radiation surface electromagnetic waves as well as Surface Plasmon Polaritons in determining both Low and High Spatial Frequency LIPSS is briefly discussed, together with some experimental evidence. Non-conventional techniques for LIPSS formation are concisely introduced to point out the high technical possibility of enhancing the homogeneity of surface structures as well as tuning the electronic properties driven by point defects induced in WBS. Among these, double- or multiple-fs-pulse irradiations are shown to be suitable for providing further insight into the LIPSS process together with fine control on the formed surface structures. Modifications occurring by LIPSS on surfaces of WBS and dielectrics display high potentialities for their cross-cutting technological features and wide applications in which the main surface and electronic properties can be engineered. By these assessments, the employment of such nanostructured materials in innovative devices could be envisaged.

Controlled periodicities of ladder-like structures via femtosecond laser of wavelength from 400 nm to 2200 nm

A special type of femtosecond laser-induced periodic surface structures (LIPSS) combined of low spatial frequency LIPSS (LSFL) and high spatial frequency LIPSS (HSFL) are fabricated simultaneously on a stainless-steel surface. These LSFL and embedded HSFL are oriented orthogonal to each other and appear like a ladder-like structure. The periodicity of these structures is systematically controlled by varying the wavelength covering a broad range from 400 nm to 2200 nm. This work demonstrates that the LSFL periodicities can be varied from λ/1.7 to λ/4.7 with the increase in wavelength. We demonstrated the control of HSFL periodicities is possible anywhere from 44 nm to 95 nm (λ/8 to λ/30). Our results show that the LSFL periodicities vary linearly with wavelengths up to 1500 nm. However, at higher wavelengths, the LSFL periodicities cannot increase beyond a maximum limit, suggesting some possible constraints in forming surface plasmon mode frequencies. Similar behavior is observed in the formation of HSFL periodicities with wavelength variation, suggesting that the embedded HSFL periodicities depend on the primary LSFL formations. These new experimental insights will help to understand several existing theories or develop new theoretical models that describe the formation of the LIPSS. We demonstrated the fabrication of controlled ladder-like structures with LSFL spatial periodicity from 240 nm to 780 nm on stainless steel surfaces. The desired periodic structures can be printed on any large area, with a plethora of applications in science and industry.

Fabrication of four-level hierarchical topographies through the combination of LIPSS and direct laser interference pattering on near-beta titanium alloy

• Direct Laser Interference Patterning using a picosecond laser source. • One-step fabrication of multiscale periodic surface structures on Ti-13Nb-13Zr. • Effects of processing parameters on the surface morphology are investigated. • Multiscale periodic structures with up to four orders of hierarchy are obtained. • Features include DLIP, grooves as well as low and high spatial frequency LIPSS. Complex repetitive periodic surface patterns were produced on a near-beta Ti-13Nb-13Zr alloy, using two-beam Direct Laser Interference Patterning (DLIP) employing a picosecond-pulsed laser source with wavelengths of 355 nm, 532 nm and 1064 nm. Different types of Laser-induced periodic surface structures (LIPSS) are produced, including low and high spatial frequency LIPSS, which are observed frequently on top of the line-like DLIP microstructures, as well as quasi-periodic microstructures with periods greater than the laser wavelength. The feature size of the fabricated LIPSS features could be tuned as function of the utilized laser process parameters.