Spaceborne Synthetic Aperture Radar Research Articles

Spaceborne SAR Time-Series Images Change Detection Based on SAR-SIFT-Logarithm Background Subtraction

Synthetic Aperture Radar (SAR) image change detection aims to detect changes with images of the same area acquired at different times. It has wide applications in environmental monitoring, urban planning and resource management. Traditional change detection methods for spaceborne SAR time-series images typically adopt a pairwise comparison strategy to obtain multi-temporal change information. However, this kind of method has the problem of losing the overall change information, which is time consuming. To address this problem, this paper proposes a new change detection algorithm for spaceborne SAR time-series data based on SAR-SIFT-Logarithm Background Subtraction. This algorithm combines the SAR-SIFT image registration technology with Logarithm Background Subtraction. The method first preprocesses the input time-series data with steps like noise reducing and radiometric calibration. Then, the images will be coregistered by the SAR-SIFT step to avoid mismatches-induced detection performance degradation. Next, the parts that remained unchanged throughout the time period are modeled with a median filter to obtain the static background. The change information is then obtained via the subtraction of background and CFAR detection and clustering. The proposed algorithm is validated using the Sentinel-1 GRD and PAZ-1 time-series dataset. Experimental results demonstrate that the proposed method effectively detects the overall change information and reduces processing time compared to traditional pairwise comparison methods.

Intelligent Detection and Segmentation of Space-Borne SAR Radio Frequency Interference

Space-borne synthetic aperture radar (SAR), as an all-weather observation sensor, is an important means in modern information electronic warfare. Since SAR is a broadband active radar system, radio frequency interference (RFI) in the same frequency band will affect the normal observation of the SAR system. Untangling the above problem, this research explores a quick and accurate method for detecting and segmenting RFI-contaminated images. The purpose of the current method is to quickly detect the existence of RFI and to locate it in massive SAR data. Based on deep learning, the method shown in this paper realizes the existence of RFI by determining the presence or absence of interference in the image domain and then performs pixel-level image segmentation on Sentinel-1 RFI-affected quick-look images to locate RFI. Considering the need to quickly detect RFI in massive SAR data, an improved network based on MobileNet is proposed, which replaces some inverted residual blocks in the network with ghost blocks, reducing the number of network parameters and the inference time to 6.1 ms per image. Further, this paper also proposes an improved network called the Smart Interference Segmentation Network (SISNet), which is based on U2Net and replaces the convolution of the VGG blocks in U2Net with a residual convolution and introduces attention mechanisms and a modified RFB module to improve the segmentation mIoU to 87.46% on average. Experiment results and statistical analysis based on the MID dataset and PAIS dataset show that the proposed methods can achieve quicker detection than other CNNs while ensuring a certain accuracy and can significantly improve segmentation performance under the same conditions compared to the original U2Net and other semantic segmentation networks.

Wave Attenuation by Sea Ice in the Arctic Marginal Ice Zone Observed by Spaceborne SAR

AbstractAttenuation of ocean waves by ice is a crucial process of the interaction between waves and sea ice in marginal ice zone (MIZ), while such interaction can contribute to the retreating of sea ice in the Arctic. Based on the retrieved two‐dimensional ocean wave spectra by spaceborne Synthetic Aperture Radar, we investigated the attenuation of ocean waves in the MIZ in Svalbard and Greenland. The results show that the energy attenuation rate ranges from 0.126 × 10−4/m to 0.618 × 10−4/m. Quantitative analysis suggests that the attenuation rate is significantly related to wave height and peak wave period of coming waves. It is further found that the waves decay faster in the area with ice thickness exceeding 0.5 m. We compared the derived wave attenuation rates in the present study with those in previous studies based on in situ measurements, which reveals that waves are becoming less attenuated by sea ice in the Arctic.

Sparse Microwave Imaging Algorithm Based on L1/2 Threshold Iteration and an Approximate Observation Operator

Aiming at the problems of synthetic-aperture radar (SAR), such as high sampling rate and vulnerability to noise interference in imaging, a sparse reconstruction algorithm based on approximate observation and L1/2 threshold iteration is proposed in this paper. To solve the problem of the large dimension and high computational complexity of the measurement matrix, a sparse reconstruction model based on approximate observation is constructed, and a threshold iterative algorithm to rapidly solve the L1/2 regularization problem is introduced, which can realize sparse signal reconstruction with fewer sampling data and quickly solve the problem. The simulation results of point targets and the measured data of spaceborne SAR show that compared with the traditional matched filtering algorithm and L1 threshold algorithm based on a two-step iteration, the proposed sparse reconstruction algorithm has a faster iteration speed and improves the image quality.

First Assessment of Bistatic Geometric Calibration and Geolocation Accuracy of Innovative Spaceborne Synthetic Aperture Radar LuTan-1

LuTan-1 (LT-1) is a bistatic synthetic aperture radar (BiSAR) system consisting of two identical L-band SAR satellites. The bistatic mode of LT-1 plays a critical role in generating high-precision digital elevation models (DEMs), which requires precise geometric calibration of initial range and azimuth times for both SARs to ensure the reliability and quality of geolocation. However, existing geometric calibration methods predominantly focus on monostatic SAR systems, with limited literature on slave SAR calibration in bistatic systems. This research addresses this gap by establishing geometric calibration models for both SARs based on signal echo history and the range–Doppler model. The geometric errors are effectively resolved using corner reflector data from Xinjiang, China. Through statistical analysis of LT-1 SAR images acquired between July and November in bistatic mode, this paper has demonstrated range delay accuracy of better than 5 ns and azimuth time accuracy of better than 0.1 ms. This level of precision translates into a positional accuracy better than 0.8 m. The proposed models have been successfully applied to geometric calibration, providing precise geolocation for LT-1, thus enhancing its utility for a wide range of Earth observation applications. This paper is the first endeavor to present the assessment of the geometric calibration and geolocation accuracy of LT-1 and discuss the results of the bistatic geometric calibration of the master and slave SARs in a BiSAR formation.

Limitations in the use of Sentinel-1 data for morphological change detection in rivers

ABSTRACT The identification of morphological changes occurring along river channels is essential to support river process understanding, assess sediment budgets and evaluate the effectiveness of river management. Among available remote sensing techniques, space-borne synthetic aperture radar (SAR) could potentially provide a powerful complement to optical imagery for this task. However, very few studies have been carried out on the use of SAR datasets to study erosion and deposition processes in river channels. In this work, we investigate the potential of change detection analysis based on Sentinel-1 data, by comparing variations of radar backscattering to river morphology changes identified through high-resolution drone acquisitions. We considered a time series of two years of Sentinel-1 data relative to a period where, despite a moderate fluvial event occurred, morphological changes have been significantly detected in multitemporal drone point clouds. Satellite optical imagery (planet.com) and hydro-meteorological data were used to support the analysis and interpret results. The results show that the spatial and temporal resolution of Sentinel-1 is currently not suitable for accurate discrimination of morphological changes related to river dynamics at local scale. Other spaceborne sensors with sub-metric ground sampling distance and/or daily revisit time would be probably suitable; however, so far, this option would need the use of commercial solutions with a consistent increase of the costs of the investigation.

Advancements in Spaceborne Synthetic Aperture Radar Imaging with System-on-Chip Architecture and System Fault-Tolerant Technology

With the continuous development of satellite payload and system-on-chip (SoC) technology, spaceborne real-time synthetic aperture radar (SAR) imaging systems play a crucial role in various defense and civilian domains, including Earth remote sensing, military reconnaissance, disaster mitigation, and resource exploration. However, designing high-performance and high-reliability SAR imaging systems that operate in harsh environmental conditions while adhering to strict size, weight, and power consumption constraints remains a significant challenge. In this paper, we introduce a spaceborne SAR imaging chip based on a SoC architecture with system fault-tolerant technology. The fault-tolerant SAR SoC architecture has a CPU, interface subsystem, memory subsystem, data transit subsystem, and data processing subsystem. The data processing subsystem, which includes fast Fourier transform (FFT) modules, coordinated rotation digital computer (CORDIC) modules (for phase factor calculation), and complex multiplication modules, is the most critical component and can achieve various modes of SAR imaging. Through analyzing the computational requirements of various modes of SAR, we found that FFT accounted for over 50% of the total computational workload in SAR imaging processing, while the CORDIC modules for phase factor generation accounted for around 30%. Therefore, ensuring the fault tolerance of these two modules is crucial. To address this issue, we propose a word-length optimization redundancy (WLOR) method to make the fixed-point pipelined FFT processors in FFT modules fault tolerant. Additionally, we propose a fault-tolerant pipeline CORDIC architecture utilizing error correction code (ECC) and sum of squares (SOS) check. For other parts of the SoC architecture, we propose a generic partial triple modular redundancy (TMR) hardening method based on the HITS algorithm to improve fault tolerance. Finally, we developed a fully automated FPGA-based fault injection platform to test the design’s effectiveness by injecting errors at arbitrary locations. The simulation results demonstrate that the proposed methods significantly improved the chip’s fault tolerance, making the SAR imaging chip safer and more reliable. We also implemented a prototype measurement system with a chip-included board and demonstrated the proposed design’s performance on the Chinese Gaofen-3 strip-map continuous imaging system. The chip requires 9.2 s, 50.6 s, and 7.4 s for a strip-map with 16,384 × 16,384 granularity, multi-channel strip-map with 65,536 × 8192 granularity, and multi-channel scan mode with 32,768 × 4096 granularity, respectively, and the system hardware consumes 6.9 W of power to process the SAR raw data.

Accuracy Improvement of High-Resolution Wide-Swath Spaceborne Synthetic Aperture Radar Imaging with Low Pule Repetition Frequency

For a single-channel spaceborne synthetic aperture radar (SAR), the usage of a low pulse repetition frequency (PRF) is an effective technical way to extend the range swath. The sub-aperture imaging strategy is usually used to solve the problem of azimuth spectrum aliasing under the condition of a low PRF. However, the required up-sampling processing before the coherent synthesis of sub-images will lead to spectrum discontinuity between adjacent sub-images, which leads to an obvious grating lobe phenomenon after the process of sub-image synthesis, resulting in a significant decrease in image quality. For this issue, a high-resolution wide-swath (HRWS) imaging algorithm for a spaceborne SAR with a low PRF is proposed in this paper based on optimal spectrum shift processing. First, each sub-aperture is imaged using the typical range migration algorithm (RMA), and then all sub-images are up-sampled at the same time. Then, based on the criterion of the minimum grating lobe, the optimal spectrum shift is estimated. Finally, the spectrum of all sub-images is shifted and then all the shifted sub-images are synthesized coherently. The simulation data processing results verify the effectiveness of the proposed method.

Spaceborne SAR-Based Detection of Ships in Suez Gulf to Analyze the Maritime Traffic Jam Caused Due to the Blockage of Egypt’s Suez Canal

With the convenience and connectedness of the oceans in recent years, there has been an increase in naval traffic, which has prompted maritime surveillance to attract special attention due to its significant application in marine operations. Ships, because of their uneven and rugged design, appear as a brighter patch, which aids in their identification by the Synthetic Aperture Radar (SAR), an active remote sensing technique. In this study, Sentinel-1 and Sentinel-2 datasets are used to detect vessels in the Gulf of Suez in order to examine the increasing maritime traffic induced by the Suez Canal blockage caused by the Ever Given ship becoming stranded in the canal on 23 March 2021 and being freed after 6 days on 29 March 2021. The usefulness of dual-pol spaceborne SAR datasets in ship detection is also determined. The analysis was performed within a time window spanning before, during, and after the blockage event. On the basis of the experimental results, Sentinel-1 images proved to be more effective compared to Sentinel-2 images for ship detection due to the all-weather capability of the Sentinel-1 dataset. Furthermore, the ship detection results obtained in dual polarization were substantially more accurate than the results obtained in a single polarization.

An Efficient On-Chip Data Storage and Exchange Engine for Spaceborne SAR System

Advancements in remote sensing technology and very-large-scale integrated circuit (VLSI) have significantly augmented the real-time processing capabilities of spaceborne synthetic aperture radar (SAR), thereby enhancing terrestrial observational capacities. However, the inefficiency of voluminous data storage and transfer inherent in conventional methods has emerged as a technical hindrance, curtailing real-time processing within SAR imaging systems. To address the constraints of a limited storage bandwidth and inefficient data transfer, this study introduces a three-dimensional cross-mapping approach premised on the equal subdivision of sub-matrices utilizing dual-channel DDR3. This method considerably augments storage access bandwidth and achieves equilibrium in two-dimensional data access. Concurrently, an on-chip data transfer approach predicated on a superscalar pipeline buffer is proposed, mitigating pipeline resource wastage, augmenting spatial parallelism, and enhancing data transfer efficiency. Building upon these concepts, a hardware architecture is designed for the efficient storage and transfer of SAR imaging system data, based on the superscalar pipeline. Ultimately, a data storage and transfer engine featuring register addressing access, configurable granularity, and state monitoring functionalities is realized. A comprehensive imaging processing experiment is conducted via a “CPU + FPGA” heterogeneous SAR imaging system. The empirical results reveal that the storage access bandwidth of the proposed superscalar pipeline-based SAR imaging system’s data efficient storage and transfer engine can attain up to 16.6 GB/s in the range direction and 20.0 GB/s in the azimuth direction. These findings underscore that the storage exchange engine boasts superior storage access bandwidth and heightened data storage transfer efficiency. This considerable enhancement in the processing performance of the entire “CPU + FPGA” heterogeneous SAR imaging system renders it suitable for application within spaceborne SAR real-time processing systems.

Performance Analysis of Channel Imbalance Control and Azimuth Ambiguity Suppression in Azimuth Dual Receiving Antenna Mode of LT-1 Spaceborne SAR System

The LuTan-1(LT-1), known as the L-band differential interferometric synthetic aperture radar (SAR) satellite system, is an essential piece of civil infrastructure in China, providing extensive applications such as surface deformation monitoring and topographic mapping. To achieve high-resolution and wide-swath (HRWS) observation abilities, the LT-1 takes the dual receiving antenna (DRA) imaging mode as its working mode. However, amplitude and phase errors between channels lead to a mismatch between the reconstruction filter and the multichannel echo signal, worsen the reconstructed azimuth spectrum, and introduce ambiguity targets in the final imaging results, seriously affecting the final imaging quality. In order to better evaluate the channel error and azimuth ambiguity performance of the LT-1 system, this paper proposed an advanced channel consistency correction method and conducted many measured data experiments. The experimental results show that the proposed method is effective, and the LT-1 system has excellent channel error control and azimuth ambiguity performance.

Raw Data Simulation of Spaceborne Synthetic Aperture Radar with Accurate Range Model

Simulated raw data have become an essential tool for testing and assessing system parameters and imaging performance due to the high cost and limited availability of real raw data from spaceborne synthetic aperture radar (SAR). However, with increasing resolution and higher orbit altitudes, existing simulation methods fail to generate SAR simulated raw data that closely resemble real raw data. This is due to approximations such as curved orbits, “stop-and-go” assumption, and Earth’s rotation, among other factors. To overcome these challenges, this paper presents an accurate range model with a “nonstop-and-go” configuration for raw data simulation based on existing time-domain simulation methods. We model the SAR echo signal and establish a precise space geometry for spaceborne SAR. Additionally, we precisely identify the target illumination area based on elliptical beams through space coordinate transformation. Finally, the SAR raw data were accurately simulated using high-precision time-domain simulation methods. The accuracy of the proposed model was validated by comparing it with the traditional hyperbolic model and the curved orbit model with “stop-and-go” assumption through image processing of the generated raw data. Through the analysis of point target quality parameters, the errors of various parameters in our distance model compared with the other two models are within 1%. Furthermore, this simulation method can be adapted to simulate raw data of other modes and satellite orbits by adjusting beam control and satellite orbit parameters, respectively. The proposed simulation method demonstrated high accuracy and versatility, thereby providing a valuable contribution to the development of remote sensing technology.

Cross-scene target detection based on feature adaptation and uncertainty-aware pseudo-label learning for high resolution SAR images

The characteristics of synthetic aperture radar (SAR) images are easily affected by factors such as sensor parameters, imaging scenes, etc., which may lead to data distributional discrepancies between the ideal training phase and the practical application phase, resulting in generalization performance degradation of deep learning based detectors in practice. In this paper, an accurate and fast domain adaptive detection method is proposed to address the performance degradation problem of cross-scene detection without requiring additional manual annotations. The cross-scene detection performance is gradually improved by confidence-induced unsupervised feature adaptation (CUFA) and uncertainty-aware adaptive pseudo-label learning (UAPL). In CUFA, image-level and instance-level feature adaptation are progressively implemented to bridge the distribution discrepancies between the source and the target domain in the latent feature space. Then, UAPL is performed to adaptively introduce accurate and stable supervisions of target domain according to the learning status of the detector, avoiding error accumulations and further improving the cross-scene target detection performance. The proposed cross-scene detection method is validated on airborne and spaceborne SAR image datasets of different imaging scenes. The experimental results show that by combining both CUFA and UAPL, compared with the second-best comparison method, the proposed method significantly improves the cross-scene target detection performance in SAR images (at least + 6.5% AP50 and F1 in miniSAR and FARAD cross-scene tasks, and at least + 7.5% AP50 and F1 in Gaofen-3 and Sentinel-1 cross-scene tasks), which facilitates application of the deep learning based detectors in the realistic scenarios.

A Priori Knowledge Based Ground Moving Target Indication Technique Applied to Distributed Spaceborne SAR System

Through formation flying, the distributed spaceborne SAR(synthetic aperture radar) system can increase the number of spatial degree of freedoms (DOFs) and provide flexible multi-baselines for SAR-GMTI (ground moving target indication), which improves the system performance. This paper proposes an a priori knowledge-based adaptive clutter cancellation and moving target detection technique applied to the distributed spaceborne SAR-GMTI systems. Firstly, the adaptive clutter cancellation technique is exploited to suppress the ground clutter. A priori knowledge, such as road network information, is integrated to the adaptive clutter cancellation processor to reduce any moving target steering vector mismatch. Secondly, adaptive matched filter (AMF) and adaptive beamformer orthogonal rejection test (ABORT) are exploited as adaptive detection techniques for moving target detection. Due to the dense road network, the moving target steering vector estimation may be ambiguous for the different position and orientation of the roads. The multiple hypothesis testing (MHT) technique is proposed to detect the moving targets and resolve the potential ambiguities. A scheme is exploited to detect, classify, and relocate the moving targets. Finally, simulation experiments and performance analysis have demonstrated the effectiveness and robustness of the proposed technique.

Analysis of Geometric Characteristics and Coverage for Moon-Based/Spaceborne Bistatic SAR Earth Observation

With the rapid development of Earth system science, a new understanding of the complete Earth system has highlighted the crucial importance of integrated observations, especially in research involving large-scale geoscience phenomena. As an active sensor with all-time and all-weather capabilities, synthetic aperture radar (SAR) has been widely used in recent decades for Earth observation. However, the existing spaceborne, airborne, and ground-based SAR systems have difficulty providing temporally consistent and spatially continuous Earth observation data on a global scale. As Earth’s only natural satellite, the Moon is a very promising Earth observation platform. By deploying a transmitter on the Moon and a receiver on the high-orbit satellite, a Moon-based/spaceborne bistatic synthetic aperture radar (MS-BiSAR) can be formed. In this paper, the MS-BiSAR geometric model of Earth observation was established using ephemeris and orbit propagators with reference system transformations, and three different MS-BiSAR configurations were used to calculate and analyze their geometric characteristics and Earth observation coverage. The results show that with the advantage of wide swaths, continuous observation capabilities, and large coverage, such an MS-BiSAR could significantly contribute to monitoring and understanding large-scale geoscience phenomena.

Snow profile reconstruction from tomographic UAV SAR

Snow profiles can provide reliable and detailed snow parameters for global change research, but it is still challenging to reconstruct large-scale spatiotemporally continuous snow profiles. Synthetic aperture radar (SAR) tomography (TomoSAR) has been proven to be a promising method for reconstructing the 3D structure of targets and has been used to reconstruct snow profiles from ground-based SAR. However, the experimental condition of ground-based SAR is ideal and the algorithms developed for ground-based SAR have some problems when applied to airborne and spaceborne sensors, such as large computational load and big angular diversity. In this paper, we first collected the Ku-band tomographic SAR dataset in the snow season of Altay, China using the Unmanned Aerial Vehicle (UAV) platform. Then, we reconstructed the snow profile from the dataset using three spectral estimation-based focusing algorithms. According to the non-stationary characteristic of the UAV platform and the dense medium property of snow, phase calibration and medium correction were performed, respectively. Finally, we assessed the reconstruction accuracy of the snow profile and snow depth using the ground synchronous measurement data. The reconstruction accuracy of the three focusing algorithms from high to low is the MUSIC algorithm, the Capon algorithm, and the Beamforming algorithm. Among them, the average error of the MUSIC algorithm to reconstruct the snow profile is 1.13 cm, and the RMSE and MAE of the snow depth retrieval are 3.71 cm and 3.26 cm, respectively. Although TomoSAR is still widely unexplored for snow using air-based sensors, the results show that it has the ability to reconstruct snow profiles accurately, and the proposed method can provide reliable support for reconstructing the large-scale spatiotemporal continuous snow profiles from subsequent spaceborne SAR.

Precise Ambiguity Performance Evaluation for Spaceborne SAR with Diverse Waveforms

The ambiguity suppression is a technical challenge for the present generation of spaceborne synthetic aperture radar (SAR) systems since this kind of suppression does not take the high spatial resolution and wide coverage into account simultaneously. The transmitting scheme based on the waveform diversity technique is a promising candidate for the conventional (one transmit, one receive channel) SAR systems and has been widely discussed, because it has almost no extra system costs and the ambiguity suppression performance is not closely related to pulse repetition frequency (PRF). However, the accurate method to evaluate the ratio of the intensities of the ambiguities to that of the signal is still a gap. To this end, starting from the precise signal model formulated in this paper, the ambiguity evaluation for spaceborne SAR with waveform diversity has been analyzed in detail. Particularly, the modified azimuth ambiguity-to-signal ratio (AASR) and range ambiguity-to-signal ratio (RASR) formulas are given for the single polarization SARs and quadrature-polarimetric (quad-pol) SARs, which contributes a lot, for the system designer, to precisely evaluating the ambiguity performance. Finally, detailed simulation experiments exploiting the system parameters of the LuTan (LT-1) system are carried out to corroborate the theoretical developments.

Segmented continuously varying pulse interval sequence design for extremely high-resolution spaceborne sliding spotlight SAR

ABSTRACT Synthetic aperture radar (SAR) is an active microwave remote sensing device used to obtain high-resolution SAR images.With the development of SAR, extremely high-resolution SAR (i.e. resolution reaching 0.1 m) plays an increasingly important role in applications such as target recognition. In extremely high-resolution spaceborne SAR, the variation of slant range history becomes extremely severe, resulting in echoes of interest overlapping with transmitted pulses and nadir echoes when transmitting the pulses at constant pulse intervals (PIs), further causing the loss of echo data. Although a continuously varying pulse interval (CVPI) system can expand the tolerance of slant range variation to some extent, overlap still occurs when the variation in slant range exceeds a certain threshold. Thus, this paper proposes segmented CVPI sequence design methods to solve the data acquisition problem in the situation of severe variation in slant range history. The timing diagram- and strip layering diagram-based segmented CVPI sequence design methods, which are suitable for the acquisition of spaceborne SAR data with any variation of slant range, are given. The characteristics of the two methods are analysed. Finally, several computer simulations indicate that the echoes generated by the proposed methods are not overlapped, which verifies the validity of the proposed methods.

Unified Framework for Ship Detection in Multi-Frequency SAR Images: A Demonstration with COSMO-SkyMed, Sentinel-1, and SAOCOM Data

In the framework of maritime surveillance, vessel detection techniques based on spaceborne synthetic aperture radar (SAR) images have promoted extensive applications for the effective understanding of unlawful activities at sea. This paper deals with this topic, presenting a novel approach that exploits a cascade application of a pre-screening algorithm and a discrimination phase. Pre-screening is based on a constant false alarm rate (CFAR) detector, whereas discrimination exploits sub-look analysis (SLA). For the first time, the method has been validated with experiments on multi-frequency (C-, X-, and L-band) SAR images, demonstrating a significant reduction of up to 40% in false alarms within highly congested scenarios, along with a notable enhancement of the receiving operating characteristic (ROC) curves. For future synergic exploitation of multiple SAR missions, the developed dataset, composed of Sentinel-1, SAOCOM, and COSMO-SkyMed images, is comprehensive, having images gathered over the same area with a short time lag (below 15 min). Finally, the diversified processing chains and the results for each mission product and scenario are discussed. Being the first dataset of single-look complex (SLC) SAR multi-frequency data, the present work intends to encourage additional investigation in this promising field of research.

Vertical autofocus for the phase screen in a turbulent ionosphere

The performance of spaceborne synthetic aperture radars (SARs) is affected by the Earth’s ionosphere. In particular, the ionospheric turbulence causes phase perturbations of the SAR signals, which may lead to image distortions. A convenient way to model those phase perturbations is by means of a phase screen. The latter is an infinitesimally thin layer positioned at a certain elevation above the Earth’s surface. The radar signal acquires an instant perturbation once its trajectory intersects the screen. The trajectory is a ray between the antenna and the target, and the magnitude of the perturbation is equal to the screen density at the intersection point. The density is a bivariate function of the coordinates along the screen. The coordinates of a specific intersection point are determined by the ray itself, as well as the screen elevation. Thus, the magnitude of the phase perturbation explicitly depends on the screen elevation. Accordingly, to compensate for the resulting image distortions one should be able to determine the elevation of the screen. In the paper, we develop an algorithm of vertical autofocus that derives this elevation from the received SAR data, given a pair of point scatterers in the target area. The proposed algorithm exploits a modification of the coherent interferometric imaging that was previously employed to reduce the effect of phase errors due to the trajectory uncertainty. In our analysis, we highlight the differences between this case and transionospheric propagation.