Solvent Molecules Research Articles

Synthesis and crystal structure of poly[[μ-chlorido-μ-(2,3-di-methyl-pyrazine)-copper(I)] ethanol hemisolvate], which shows a new isomeric CuCl(2,3-di-methyl-pyrazine) network.

Reaction of copper(I)chloride with 2,3-di-methyl-pyrazine in ethanol leads to the formation of the title compound, poly[[μ-chlorido-μ-(2,3-di-methyl-pyrazine)-copper(I)] ethanol hemisolvate], {[CuCl(C6H8N2)]·0.5C2H5OH} n or CuCl(2,3-di-methyl-pyrazine) ethanol hemisolvate. Its asymmetric unit consists of two crystallographically independent copper cations, two chloride anions and two 2,3-di-methyl-pyrazine ligands as well as one ethanol solvate mol-ecule in general positions. The ethanol mol-ecule is disordered and was refined using a split model. The methyl H atoms of the 2,3-di-methyl-pyrazine ligands are also disordered and were refined in two orientations rotated by 60° relative to each other. In the crystal structure, each copper cation is tetra-hedrally coordinated by two N atoms of two bridging 2,3-di-methyl-pyrazine ligands and two μ-1,1-bridg-ing chloride anions. Each of the two copper cations are linked by pairs of bridging chloride anions into dinuclear units that are further linked into layers via bridging 2,3-di-methyl-pyrazine coligands. These layers are stacked in such a way that channels are formed in which the disordered solvent mol-ecules are located. The topology of this network is completely different from that observed in the two polymorphic modifications of CuCl(2,3-di-methyl-pyrazine) reported in the literature [Jess & Näther (2006). Inorg. Chem. 45, 7446-7454]. Powder X-ray diffraction measurements reveal that the title compound is unstable and transforms immediately into an unknown crystalline phase.

Controlled assembly and synthesis of oxygen-deficient W18O49 films based on solvent molecular strategy for electrochromic energy storage smart windows

18O49 is a promising electrochromic material with abundant oxygen vacancy and high carrier mobility. However, the electrochromism of W18O49 is not satisfactory, the regulation and synthesis of high-performance W18O49 have become the research hotspot. In this work, it is found that the main chain and side chain structure of solvent molecules can control the assembly and synthesis of W18O49 film, so as to achieve excellent electrochemical and electrochromic properties. The porous reticular W18O49 film synthesized in short-chain molecular solvent shows the excellent transmittance modulation (81.6 % at 633 nm, 77.0 % at 1050 nm), and exhibits the high energy storage of 41.7 mF cm−2 at 0.1 mA cm−2. Solvent molecular strategy provides a new way for the synthesis and regulation of W18O49 electrochromic films and promotes the further development of high-performance electrochromic materials.

Theoretical insights into the diverse stabilizing effects of fenchyl alcohol/thymol eutectic solvent on carotenoids

Carotenoids, a class of vital natural pigments, are known for their antioxidant properties and are integral to various industrial applications. However, their instability during processing and storage has limited their broader utilization. This study investigated the stabilizing effects of a fenchyl alcohol/thymol-based deep eutectic solvent (DES) on a spectrum of carotenoids, including lutein, zeaxanthin, astaxanthin, and β-carotene. Through a combination of ab initio molecular dynamics (AIMD) simulations and quantum chemical calculations, we elucidated the molecular interactions and stabilization mechanisms within the DES environment (methanol as the benchmark). Our findings reveal that the DES could exert varying degrees of influence on the stability of different types of carotenoids. The temperature-dependent behavior of carotenoids in the DES suggested a complex interplay between hydrogen bonding, dispersion forces, and the inherent structural properties of carotenoids. AIMD simulations provided a detailed picture of the structural organization and hydrogen bond network topology within the DES, highlighting the role of temperature on the stability and orientation of solvent molecules around carotenoids. Energy decomposition analysis (EDA), Hirshfeld surface analysis, and visual study of interactions further dissected the non-covalent interactions, emphasizing the significance of electrostatic and dispersion forces-driven non-covalent interactions (van der Waals dispersion interactions) in stabilizing carotenoids within the DES matrix. In comparison to methanol, the interactions between components of the eutectic system and the target molecules demonstrate enhanced dynamism, increased complementarity, and a greater variety of interaction patterns. This research presented a novel perspective on the use of DESs for the stabilization of carotenoids, offering potential solutions to enhance their industrial applicability and performance. The insights gained from this study are crucial for the development of sustainable and eco-friendly solvent systems, aligning with the growing demand for green chemistry in the pharmaceutical, cosmetic, and food industries.

Towards Nickel-NHC Fluoro Complexes-Synthesis of Imidazolium Fluorides and Their Reactions with Nickelocene.

While hundreds of complexes of the general formula [Ni(η5-C5H5)(NHC)(X)] exist (NHC = a N-heterocyclic carbene, X = Cl, Br, I), none is yet known with X = F. We attempted to prepare such a species by reacting nickelocene with imidazolium fluorides. Three imidazolium fluorides (ImH)+ F- [Im = (N,N'-bis-(R)-imidazolium: 1a, IMe, R = Me; 1b, IMes, R = 2,4,6-trimethylphenyl; 1c, IPr, R = 2,6-diisopropylphenyl)] were prepared and characterized by spectroscopic methods. In addition, the salts 1b [(IMesH)+ F-] and 1c [(IPrH)+ F-] were subjected single-crystal X-ray diffraction experiments. The reactions of these imidazolium fluorides with nickelocene did not lead to [Ni(η5-C5H5)(NHC)(F)] species. Instead, the reaction of 1a [(IMeH)+ F-] and 1b [(IMesH)+ F-] with nickelocene led to the salt 2 [Ni(η5-C5H5)(IMe)2]+ F- and to the square planar complex 3atrans-[NiF2(IMes)2] respectively. Both complexes were characterized spectroscopically and by single crystal X-ray diffraction. All four X-ray diffraction studies reveal hydrogen bonding and hydrogen interactions with the F atom or anion, and in some cases with solvent molecules of crystallization, and these phenomena are all discussed. Complex 2, in particular, exhibited a wide range of interesting H-bonded interactions in the solid state. Complexes 2 and 3a were tested as catalysts for Suzuki-Miyaura coupling but were not promising: complex 2 was inactive, and while 3a did indeed catalyze the reaction, it gave widely diverging results owing to its instability in solution.

Structural Comparisons, Fluorescence Properties, and Glass-to-Crystal Transformations of Heat-Cooled and Melt-Quenched Zeolitic Imidazolate Framework Glass.

As a representative of zeolitic imidazolate framework glass, agZIF-62 has been reported to be synthesized using a melt-quenching method in which the ZIF-62 crystal is heated to a temperature above the melting point. Interestingly, we unexpectedly found that agZIF-62 can also be synthesized by simple heating at temperatures lower than the melting point, which may be assisted by the release of encapsulated solvent molecules. The structural differences between melt-quenched agZIF-62 (MQ-agZIF-62) and heat-cooled agZIF-62 (HC-agZIF-62) were investigated. The results indicated that MQ-agZIF-62 is closer to the liquid state, while HC-agZIF-62 is closer to the crystal state. Interestingly, their luminescent emissions exhibit significant differences. Compared with the ZIF-62 crystal, MQ-agZIF-62 showed a blue-shift of 14 nm, whereas HC-agZIF-62 showed a red-shift of 9 nm. The emission intensity of agZIF-62 is also significantly stronger than that of ZIF-62; thus, rapid semiquantitative detection of the content of the MOF glass in glass and crystal mixtures can be achieved. In addition, HC-agZIF-62 and MQ-agZIF-62 can transform into ZIF-62 crystals via a solvent-media mechanism. This study provides new insights into ZIF-62 glass.

Gas-Phase Studies of NMR Shielding and Indirect Spin-Spin Coupling in 13C-Enriched Ethane and Ethylene.

13C and 1H NMR spectra were observed as the function of density in 1,2-13C-enriched ethane and ethylene for the pure gaseous compounds and their binary mixtures with xenon and carbon dioxide gases as the solvents. All the chemical shifts and indirect spin-spin couplings were linearly dependent on the solvent density. The appropriate NMR parameters (σ and nJ) in isolated 13C2H6 and 13C2H4 molecules and the coefficients responsible for the binary molecular interactions were determined and compared with previous similar measurements and selected calculated shielding data. The newly obtained 13C shielding values in the isolated ethane and ethylene molecules suggest visible secondary isotope effects due to the additional carbon-13 atom. All the investigated shielding parameters depend on intermolecular interactions, and the dependence of 13C shielding is much more marked. In contrast, the indirect spin-spin couplings in 13C2H6 and 13C2H4 molecules are almost independent of solvent molecules. Their nJ values determined in liquids over sixty years ago are generally consistent with the same nJ parameters in isolated 13C2H6 and 13C2H4 molecules.

Solvent Effect on Dative and Ionic Bond Strengths: A Unified Theory from Potential Analysis and Valence-Bond Computations.

Solvent molecules interact with a solute through various intermolecular forces. Here we employed a potential energy surface (PES) analysis to interpret the solvent-induced variations in the strengths of dative (Me3NBH3) and ionic (LiCl) bonds, which possess both ionic and covalent (neutral) characteristics. The change of a bond is driven by the gradient (force) of the solvent-solute interaction energy with respect to the focused bond length. Positive force shortens the bond length and increases the bond force constant, leading to a blue-shift of the bond stretching vibrational frequency upon solvation. Conversely, negative force elongates the bond, resulting in a reduced bond force constant and red-shift of the stretching vibrational frequency. The different responses of Me3NBH3 and LiCl to solvation are studied with valence bond (VB) theory, as Me3NBH3 and LiCl are dominated by the neutral covalent VB structure and the ionic VB structure, respectively. The dipole moment of an ionic VB structure increases along the increasing bond distance, while the dipole moment of a neutral covalent VB structure increases with the decreasing bond distance. The roles of the dominating VB structures are further examined by the geometry optimizations and frequency calculations with the block-localized wavefunction (BLW) method.

Theoretical investigation of benzodithiophene-based donor molecules in organic solar cells: from structural optimization to performance metrics.

Achieving high power conversion efficiency (PCE) remains a significant challenge in the advancement of organic solar cells (OSCs). In the field of organic photovoltaics (OPVs), considerable progress has been made in optimizing molecular structures to improve the PCE. However, innovative material design strategies specifically aimed at enhancing PCE are still needed. Here, we have designed BDTS-2DPP-based molecules and propose a molecular design approach to develop donor materials that can significantly improve the PCE of OSCs. Density functional theory (DFT) and time-dependent DFT (TD-DFT) methods have been adopted in both gas and solvent phases. Our newly designed molecule M1 shows the highest absorption value (λ max = 846 nm), highest electron reorganization energy (λ e = 0.18 eV), and the lowest energy gap (E g = 1.81 eV) among all the designed molecules. M1 molecule also exhibits the highest dipole moment in both gas (10.62 D) and solvent phase (13.62 D), and their ground and excited state dipole moment difference is also higher (μ e - μ g = 2.99 D), which enhances its separation to make it a suitable candidate for charge transfer between HOMO-LUMO (97%). Newly designed molecule M3 is observed to have the highest voltage when the current is zero (V oc = 1.15 V) highest PCE value (21.90%) and highest fill factor (FF) value (89.42%). The lowest excitation binding energy is estimated by newly designed molecule M2 (E b = 0.30 eV), which indicates a higher rate of dissociation during the excitation as observed in transition density matrix (TDM) plots. Utilizing electron density difference maps, the newly designed molecules in dichloromethane solvent exhibited consistent intramolecular charge transfer (ICT). The designed molecules were evaluated against reference molecule R to determine if they exhibit superior optoelectronic capabilities. It is found that all designed molecules (M1-M5) exhibit reduced band gaps, are red-shifted in wavelength in comparison to a reference molecule R, and have remarkable charge motilities in terms of reorganisation energies.

Trp-cage-1,1,1,3,3,3-Hexafluoro-2-propanol-Water Interactions in a Nanosphere at 298 K.

MD simulations of the peptide Trp-cage dissolved in a solvent composed of 28% 1,1,1,3,3,3-hexafluoroisopropanol-water and contained within a nanosphere of 4.2 nm radius are described. To provide a thermal buffer, the nanosphere is submerged in a collection of liquid neopentane molecules, modeled as united atoms. It was found that the HFIP-water mixture demixes when confined under these conditions, with most of the fluoroalcohol becoming strongly associated with the walls of the nanosphere. The remaining HFIP interacts with the peptide and itself in the interior of the nanoshell. Diffusion of HFIP molecules near the surface of the nanoshell is limited, taking place over a small volume, while diffusion of the fluoroalcohol in the center of the nanoshell is more wide-ranging. By contrast, diffusion of the water in the solvent mixture appears to take place equivalently throughout the shell. The conformation of the peptide, distribution of solvent components around it, and the number and duration of the contacts with solvent molecules are calculated and contrasted to results previously reported for the bulk (non-nanocontained) system.

Elucidating the Hydrolysis and Polymerization Reactions of Al3+‐Solvated Molecules by Reactive Molecular Dynamics Simulation

ABSTRACTUtilizing the reactive molecular dynamics (ReaxFF MD) simulation, we conducted a comprehensive study on the impact of basicity (OH−/Al3+ ratio), concentration, and temperature on the hydrolysis and polymerization reactions of Al3+‐solvated molecules. Through simulations, we analyzed the structural changes, energy fluctuations of the system, and the evolution patterns of reaction products under different parameters, which were subsequently validated by experimental data. The research results indicate that hydroxide ions in the solution directly influence the breakage of OH bonds in the coordinating water molecules of solvated aluminum ions. This, in turn, affects the number of H2O and OH− ions coordinated with Al3+, leading to changes in hydrolysis products. Additionally, the number of OH− ions surrounding Al3+ affects the electrostatic repulsion, making it easier for polymerization reactions to occur as the system approaches the point of zero charge. On the other hand, an increase in concentration and temperature enhances the frequency of cluster collisions, thus contributing to an increase in polymerization degree. The experimental results align closely with our simulated predictions. As the pH value increases, the particle size exhibits a trend of first increasing and then decreasing, reaching a maximum at the point of zero charge. Simultaneously, an increase in concentration also prompts an increase in particle size. The combination of these empirical results with simulations enhances the credibility and reliability of our model's predictive capabilities. This study not only expands our understanding of the relevant chemical reaction processes but also provides important theoretical support for practical applications in related fields.

Language Model-Assisted Machine Learning, Photoelectrochemical, and First-Principles Investigation of Compatible Solvents for a CH3NH3PbI3 Film in Water.

Machine learning and data-driven methods have attracted a significant amount of attention for the acceleration of the design of molecules and materials. In this study, a material design protocol based on multimode modeling that combines literature modeling, numerical data collection, textual descriptor design, genetic modeling, experimental validation, first-principles calculation, and theoretical efficiency calculation is proposed, with a case study on designing compatible complex solvent molecules for a halide perovskite film, which is notorious for optoelectronic deactivation under hostile conditions, especially in water. In the multimode modeling design process, the textual descriptors play the central role and store rich literature scientific knowledge, which starts from the construction of a high-dimension literature model based on scientific articles and is realized by a genetic algorithm for materials predictions. The prediction is substantiated by follow-up experiments and first-principles calculations, leading to the successful identification of effective molecular combinations delivering an unprecedented large aqueous photocurrent (increasing by 3 orders of magnitude compared with that of CH3NH3PbI3) and remarkable aqueous stability (improving from 36% to 89% after immersion in water) under the hostile condition. This study provides a practical route via multimode modeling for accelerating the design of molecule-modified and solution-processed materials in a real scenario.

Reaction-Free Energies for Complexation of Carbohydrates by Tweezer Diboronic Acids.

The accurate calculation of reaction-free energies (ΔrG°) for diboronic acids and carbohydrates is challenging due to reactant flexibility and strong solute-solvent interactions. In this study, these challenges are addressed with a semiautomatic workflow based on quantum chemistry methods to calculate conformational free energies, generate microsolvated solute structural ensembles, and compute ΔrG°. Workflow parameters were optimized for accuracy and precision while controlling computational costs. We assessed the accuracy by studying three reactions of diboronic acids with glucose and galactose, finding that the conformational entropy contributes significantly (by 3-5 kcal/mol at room temperature). Explicit solvent molecules improve the computed ΔrG° accuracy by about 4 kcal/mol compared to experimental data, though using 13 or more water molecules reduced precision and increased computational overhead. After fine-tuning, the workflow demonstrated remarkable accuracy, with an absolute error of about 2 kcal/mol compared to experimental ΔrG° and an average interquartile range of 2.4 kcal/mol. These results highlight the workflow's potential for designing and screening tweezer-like ligands with tailored selectivity for various carbohydrates.

Effect of Direct and Water-Mediated Interactions on the Identification of Hotspots in Biomolecular Complexes with Multiple Subsystems.

Identification of important residues in biochemical complexes is often a crucial step for many problems in molecular biology and biochemistry. A method is proposed to identify hotspots in biomolecular complexes based on a new metric, derived from networks representing molecular subunits (residues, bridging solvent molecules, ligands etc.) connected by interactions. A singular value decomposition of the weighted adjacency matrix is used to construct a scalar rank for each subunit that reflects its importance in the residue interaction network. This metric is called the singular value centrality. In addition, a new formalism is proposed to account for water-mediated interactions in the ranking of residues. Interactions for a residue network can be provided by various computational methods. In this work interactions are obtained from full quantum-mechanical calculations of protein-protein complexes using the fragment molecular orbital method. The ranking results are shown to be in good agreement with earlier computational and experimental studies. The developed method can be used to gain a deeper insight into the role of subunits in complex biomolecular systems.

Photochemistry of a proton relay – system with triple fluorescence

The excited state of proton transfer and the dynamics of the excited states of three 3-carboxy substituted bis-salicylidenes (H4L1-3) have been studied by combining steady state and time-resolved absorption and emission methods, and with quantum chemical calculations. The 3-carboxy substituted bis-salicylidenes contain two coupled intramolecular hydrogen bonds of the OH…OH…N type. This system has two proton transfer sites. The compounds have excitation – dependent emission and a high sensitivity to the solvent polarity. ESIPT and deprotonation result in the co-existence of enol, keto, anionic and zwitterionic species with or without quinoid structure, whose emission bands are located from the blue to the yellowish-green region. The photophysical processes in the nano-to-microseconds timescale have been linked to the intermolecular interactions with the solvent, where hydrogen bonding leads to the formation of a cyclic 1:2 solute − solvent complex. Transient absorption spectroscopy revealed that the generation of charged structures of H4L1-3 occurs through a solvent-assisted proton transfer along the chain of two solvent molecules, which act as a proton-relay system. The computational study of the energy profiles and of the enol-to-keto tautomerization with explicit solvent molecules has been performed for the first time for this kind of ESIPT system.

Computational Exploration of the Mechanism of Action of a Sorafenib-Containing Ruthenium Complex as an Anticancer Agent for Photoactivated Chemotherapy.

Ruthenium(II) polypyridyl complexes are being tested as potential anticancer agents in different therapies, which include conventional chemotherapy and light-activated approaches. A mechanistic study on a recently synthesized dual-action Ru(II) complex [Ru(bpy)2(sora)Cl]+ is described here. It is characterized by two mono-dentate leaving ligands, namely, chloride and sorafenib ligands, which make it possible to form a di-aquo complex able to bind DNA. At the same time, while the released sorafenib can induce ferroptosis, the complex is also able to act as a photosensitizer according to type II photodynamic therapy processes, thus generating one of the most harmful cytotoxic species, 1O2. In order to clarify the mechanism of action of the drug, computational strategies based on density functional theory are exploited. The photophysical properties of the complex, which include the absorption spectrum, the kinetics of ISC, and the character of all the excited states potentially involved in 1O2 generation, as well as the pathway providing the di-aquo complex, are fully explored. Interestingly, the outcomes show that light is needed to form the mono-aquo complex, after releasing both chloride and sorafenib ligands, while the second solvent molecule enters the coordination sphere of the metal once the system has come back to the ground-state potential energy surface. In order to simulate the interaction with canonical DNA, the di-aquo complex interaction with a guanine nucleobase as a model has also been studied. The whole study aims to elucidate the intricate details of the photodissociation process, which could help with designing tailored metal complexes as potential anticancer agents.

Layered Silicates Exhibiting MOF-Like Gate-Opening Behaviors in Liquid-Phase Adsorptions: Experimental and Theoretical Investigations.

Layered silicates, including clay minerals, can be used as liquid-phase adsorbents in many important applications. However, because their two-dimensional interlayer space is narrow and not entirely opened due to the presence of interlayer species, guest species are forced to penetrate while expanding the interlayer space, which limits their adsorption performances compared with microporous materials such as MOFs and zeolites. Herein, as reported for the adsorption of gaseous species on flexible MOFs, we report a layered silicate that exhibits gate-opening adsorption in liquid phases. This layered silicate, synthesized via dilute acid treatment of the parent sodium-type, exhibits an abrupt increase in the basal spacing (layer thickness + interlayer space) to reach a plateau even at an earlier stage of benzoic acid adsorption from acetonitrile, whereas a typical layered silicate, magadiite, exhibits a gradual increase in the basal spacing as adsorption progress under identical conditions. The layered silicate shows an excellent adsorption capacity and rate for benzoic acid uptake from acetonitrile, which is considerably higher than that of magadiite. With comprehensive adsorption tests using different adsorbates and solvents, we propose that the layered silicate has zeolite-like but distorted, flexible open microchannels within each layer, and the intralayer microchannels can effectively and rapidly accommodate the solvent (acetonitrile) molecules, which are capable of expanding the framework to initiate the adsorption of aromatic compounds. The density function theory calculation revealed the adsorption mechanism, where the layered silicate accommodates acetonitrile in the intralayer microchannel followed by the interlayer space, and the former selectively plays a role as the adsorption site of aromatic compounds via exchange with acetonitrile.

Producing Freestanding Single-Crystal BaTiO3 Films through Full-Solution Deposition.

Strontium aluminate, with suitable lattice parameters and environmentally friendly water solubility, has been strongly sought for use as a sacrificial layer in the preparation of freestanding perovskite oxide thin films in recent years. However, due to this material's inherent water solubility, the methods used for the preparation of epitaxial films have mainly been limited to high-vacuum techniques, which greatly limits these films' development. In this study, we prepared freestanding single-crystal perovskite oxide thin films on strontium aluminate using a simple, easy-to-develop, and low-cost chemical full-solution deposition technique. We demonstrate that a reasonable choice of solvent molecules can effectively reduce the damage to the strontium aluminate layer, allowing successful epitaxy of perovskite oxide thin films, such as 2-methoxyethanol and acetic acid. Molecular dynamics simulations further demonstrated that this is because of their stronger adsorption capacity on the strontium aluminate surface, which enables them to form an effective protective layer to inhibit the hydration reaction of strontium aluminate. Moreover, the freestanding film can still maintain stable ferroelectricity after release from the substrate, which provides an idea for the development of single-crystal perovskite oxide films and creates an opportunity for their development in the field of flexible electronic devices.

Bis[2-(isoquinolin-1-yl)phenyl-κ2 N,C 1](2-phenyl-1H-imidazo[4,5-f][1,10]phenanthroline-κ2 N,N')iridium(III) hexa-fluorido-phosphate methanol monosolvate.

The title compound, [Ir(C15H10N)2(C19H12N4)]PF6·CH3OH, crystallizes in the C2/c space group with one monocationic iridium complex, one hexa-fluorido-phosphate anion, and one methanol solvent mol-ecule of crystallization in the asymmetric unit, all in general positions. The anion and solvent are linked to the iridium complex cation via hydrogen bonding. All bond lengths and angles fall into expected ranges compared to similar compounds.

All-Optical Control of Vortex Lasing in Silicon-Organic Lattices.

This paper reports a silicon-organic hybrid lattice that can lase with vortex emission and allow all-optical control. We combine an array of amorphous silicon nanodisks with gain from dye molecules in organic solvents to generate vortex lasing from bound states in the continuum under pulsed optical pumping. Irradiating the device with an additional continuous wave green laser beam can cause optical heating in silicon and lead to negative change in the refractive index of the organic solvents; meanwhile, the green laser beam can provide additional gain. Dynamic tuning of the lasing wavelength is achieved by varying the intensity of the controlling beam. Furthermore, the vortex beam lasing can be switched to single-lobed beam lasing by moving the controlling spot to break the in-plane symmetry within the pumping spot. Our findings could shed new light on active silicon topological devices.

Crystal structures and properties of derivatives of the alkaloid matrine: salts and hydrate forms.

We report the crystal structures of three matrine derivatives, namely, the salts (1R,2R,9S,17S)-6-oxo-7,13-diazatetracyclo[7.7.1.02,7.013,17]heptadecan-13-ium (2E)-3-(3,4-dihydroxyphenyl)prop-2-enoate (matrine caffeinate) sesquihydrate, C15H25N2O+·C9H7O4-·1.5H2O (Matrine-CA), and the 2-hydroxybenzoate (salicylate) monohydrate, C15H25N2O+·C7H5O3-·H2O (Matrine-SA), as well as the 1.75-hydrate form, (1R,2R,9S,17S)-7,13-diazatetracyclo[7.7.1.02,7.013,17]heptadecan-6-one 1.75-hydrate, C15H24N2O·1.75H2O (Matrine-H). Each derivative exhibited a consistent molecular conformation for the matrine core, which is notably distinct from that of the anhydrous form. Notably, both salts crystallized in the orthorhombic space group P212121, with an asymmetric unit featuring one cation and one anion. Within the two salt structures, intermolecular proton transfer between matrine and the acid is observed, culminating in the formation of a matrine cation protonated at the tertiary amine N site. The Matrine-CA crystal packing is manifested as a three-dimensional (3D) network arising from one-dimensional (1D) supramolecular helical chains, stabilized by N-H...O and O-H...O hydrogen bonds. In the case of Matrine-SA, the matrine cation is interconnected via hydrogen bonds with salicylate anions and water molecules, also forming a 1D helical motif. The structure of the hydrate form, Matrine-H, is reported again with the disordered solvent molecules accurately located. To further elucidate the structural attributes, Hirshfeld surface analysis and fingerprint plots are employed, offering a nuanced perspective on the intermolecular contacts and interactions within these crystalline forms.