Solution-processed Colloidal Quantum Dots Research Articles

Planar Cation Passivation on Colloidal Quantum Dots Enables High-Performance 0.35-1.8µm Broadband TFT Imager.

Solution-processed colloidal quantum dots (CQDs) are promising candidates for broadband photodetectors from visible light to shortwave infrared (SWIR). However, large-size PbS CQDs sensitive to longer SWIR are mainly exposed with nonpolar (100) facets on the surface, which lack robust passivation strategies. Herein, an innovative passivation strategy that employs planar cation, is introduced to enable face-to-face coupling on (100) facets and strengthen halide passivation on (111) facets. The defect density of CQDs film (Eg ≈ 0.74eV) is reduced from 2.74×1015 to 1.04×1015 cm-3 , coupled with 0.1eV reduction in the activation energy of defects. The resultant CQDs photodiodes exhibit a low dark current density of 14 nA cm-2 with a high external quantum efficiency (EQE) of 62%, achieving a linear dynamic range of 98dB, a -3dB bandwidth of 103kHz and a detectivity of 4.7×1011 Jones. The comprehensive performance of the CQDs photodiodes outperforms previously reported CQDs photodiodes operating at >1.6µm. By monolithically integrated with thin-film transistor (TFT) readout circuit, the broadband CQDs imager covering 0.35-1.8µm realizes the functions including silicon wafer perspectivity and material discrimination, showing its potential for wide range of applications.

Rational ligand design for enhanced carrier mobility in self-powered SWIR photodiodes based on colloidal InSb quantum dots.

Solution-processed colloidal III-V semiconductor quantum dot photodiodes (QPDs) have potential applications in short-wavelength infrared (SWIR) imaging due to their tunable spectral response range, possible multiple-exciton generation, operation at 0-V bias voltage and low-cost fabrication and are also expected to replace lead- and mercury-based counterparts that are hampered by reliance on restricted elements (RoHS). However, the use of III-V CQDs as photoactive layers in SWIR optoelectronic applications is still a challenge because of underdeveloped ligand engineering for improving the in-plane conductivity of the QD assembled films. Here, we report on ligand engineering of InSb CQDs to enhance the optical response performance of self-powered SWIR QPDs. Specifically, by replacing the conventional ligand (i.e., oleylamine) with sulfide, the interparticle distance between the CQDs was shortened from 5.0 ± 0.5 nm to 1.5 ± 0.5 nm, leading to improved carrier mobility for high photoresponse speed to SWIR light. Furthermore, the use of sulfide ligands resulted in a low dark current density (∼nA cm-2) with an improved EQE of 18.5%, suggesting their potential use in toxic-based infrared image sensors.

Solution-processed colloidal quantum dots for internet of things.

Colloidal quantum dots (CQDs) have been a hot research topic ever since they were successfully fabricated in 1993 via the hot injection method. The Nobel Prize in Chemistry 2023 was awarded to Moungi G. Bawendi, Louis E. Brus and Alexei I. Ekimov for the discovery and synthesis of quantum dots. The Internet of Things (IoT) has also attracted a lot of attention due to the technological advancements and digitalisation of the world. This review first aims to give the basics behind QD physics. After that, the history behind CQD synthesis and the different methods used to synthesize most widely researched CQD materials (CdSe, PbS and InP) are revisited. A brief introduction to what IoT is and how it works is also mentioned. Then, the most widely researched CQD devices that can be used for the main IoT components are reviewed, where the history, physics, the figures of merit (FoMs) and the state-of-the-art are discussed. Finally, the challenges and different methods for integrating CQDs into IoT devices are discussed, mentioning the future possibilities that await CQDs.

High-Performance and Stable Colloidal Quantum Dots Imager via Energy Band Engineering.

Solution-processed colloidal quantum dot (CQD) photodiodes are compatible for monolithic integration with silicon-based readout circuitry, enabling ultrahigh resolution and ultralow cost infrared imagers. However, top-illuminated CQD photodiodes for longer infrared imaging suffer from mismatched energy band alignment between narrow-bandgap CQDs and the electron transport layer. In this work, we designed a new top-illuminated structure by replacing the sputtered ZnO layer with a SnO2 layer by atomic layer deposition. Benefiting from matched energy band alignment and improved heterogeneous interface, our top-illuminated CQD photodiodes achieve a broad-band response up to 1650 nm. At 220 K, these SnO2-based devices exhibit an ultralow dark current density of 3.5 nA cm-2 at -10 mV, reaching the noise limit for passive night vision. The detectivity is 4.1 × 1012 Jones at 1530 nm. These SnO2-based devices also demonstrate exceptional operation stability. By integrating with silicon-based readout circuitry, our CQD imager realizes water/oil discrimination and see-through smoke imaging.

Control over Charge Carrier Mobility in the Hole Transport Layer Enables Fast Colloidal Quantum Dot Infrared Photodetectors

Solution-processed colloidal quantum dots (CQDs) are promising materials for photodetectors operating in the short-wavelength infrared region (SWIR). Devices typically rely on CQD-based hole transport layers (HTL), such as CQDs treated using 1,2-ethanedithiol. Herein, we find that these HTL materials exhibit low carrier mobility, limiting the photodiode response speed. We develop instead inverted (p-i-n) SWIR photodetectors operating at 1370 nm, employing NiOx as the HTL, ultimately enabling 4× shorter fall times in photodiodes (∼800 ns for EDT and ∼200 ns for NiOx). Optoelectronic simulations reveal that the high carrier mobility of NiOx enhances the electric field in the active layer, decreasing the overall transport time and increasing photodetector response time.

Improved Operation Stability of Colloidal Quantum Dots Photodiodes via Suppressing Ion Migration

Solution-processed colloidal quantum dots (CQDs) photodiodes are compatible for monolithic integration with silicon-based readout circuit, enabling high-performance and low-cost infrared imaging. However, operation stability of CQDs photodiodes has rarely been explored, which is one of the main obstacles for CQDs imaging commercialization. Here, we reveal that the performance deterioration of the CQDs photodiodes under strong electric field at high temperature is mainly attributed to ion migration in CQDs film, clearly clarified by aging photoconductors based on each functional layer of CQDs photodiodes. The halide ion migration through vacancy increases the defect density of the CQDs layer and blocks device interfaces, resulting in increased dark current density and postponed saturation voltage. We introduce polyimide (PI) into CQDs film to efficiently block the pathway for halide ion migration. As a result, the CQDs photodiodes with PI achieve greatly improved operation stability over 27 h under 104 V/cm electric field at 85 °C.

Solution-processed colloidal quantum dots for light emission

Quantum dots (QDs) are an emerging class of photoactive materials that exhibit extraordinary optical features. This paper presents a review of colloidal QD synthesis and the reasons behind their use in light emission applications.

Surface Decomposition and Healing in Solution-Phase Ligand Exchange for Efficient Colloidal Quantum Dot Solar Cells

The efficiency of solution-processed colloidal quantum dot (CQD) thin-film solar cells has been significantly improved recently. However, there is still potential for efficiency improvements, which can be realized through a deeper understanding of surface chemical treatment for CQDs. In this study, we developed CQD thin-film solar cells with an improved power conversion efficiency (PCE) of 11.97%. We accomplished this by simply controlling the species and their molar concentrations used in the surface chemical treatment in the solutionphase ligand exchange process. Iodine treatment that generates conductive CQDs induces surface defects via cationic decomposition of the CQD surface; healing the CQD surface requires an excess of lead cations in the solution-phase ligand exchange process. Accordingly, we found that manufacturing CQD thin-film solar cells that have high efficiencies requires well-controlled surface treatment to effectively exchange surface ligands and simultaneously minimize surface defects on the CQD surface.

Boosting the performance of solution-processed quantum dots light-emitting diodes by a hybrid emissive layer via doping small molecule hole transport materials into quantum dots

Solution-processed colloidal quantum dot light-emitting diodes (QLED) have attracted many attentions with significant progress in recent years. However, QLED devices still face some challenges. The energy barrier between Cd-base quantum dots (QDs) and commonly used hole transport materials is larger than that between QDs and electron transport materials, which leads to the imbalance of carriers in the light emitting layer (EML) and the low performance of QLED devices. Herein, we report a simple strategy to improve the device performance by doping small molecule transport material 4,4′-cyclohexylidenebis[N,N-bis(p-tolyl)aniline] (TAPC) into red CdSe/ZnS QDs. The optimized red QLED devices with TAPC-doped emissive layer at a ratio of 3.2 wt% achieve 20.0 cd/A of maximum current efficiency, 16.6 lm/W of power efficiency and 15.7% of external quantum efficiency, which is 30%, 58% and 33% higher than the control device. The improved performance of devices can be ascribed to the increase of hole current density, decrease of leakage electrons and more balanced quantity of carriers in EML. This work put forward a viewpoint to improve the performance of QLED devices via doping high hole mobility materials into emission layer. • Small molecule hole transport material TAPC is doped into red CdSe/ZnS QDs to enhance the device performance. • The EML solution consists of QD octane solution and TAPC o-xylene solution. • The introduction of TAPC leads to the reduction of leakage electrons and the improvement of hole density.

Advanced characterization methods of carrier transport in quantum dot photovoltaic solar cells

Solution-processed colloidal quantum dot (CQD) solar cells are lightweight, flexible, inexpensive, and can be spray-coated on various substrates. However, their power conversion efficiency is still insufficient for commercial applications. To further boost CQD solar cell efficiency, researchers need to better understand and control how charge carriers and excitons transport in CQD thin films, i.e., the CQD solar cell electrical parameters including carrier lifetime, diffusion length, diffusivity, mobility, drift length, trap state density, and doping density. These parameters play key roles in determining CQD thin film thickness and surface passivation ligands in CQD solar cell fabrication processes. To characterize these CQD solar cell parameters, researchers have mostly used transient techniques, such as short-circuit current/open-circuit voltage decay, photoconductance decay, and time-resolved photoluminescence. These transient techniques based on the time-dependent excess carrier density decay generally exhibit an exponential profile, but they differ in the signal collection physics and can only be used in some particular scenarios. Furthermore, photovoltaic characterization techniques are moving from contact to non-contact, from steady-state to dynamic, and from small-spot testing to large-area imaging; what are the challenges, limitations, and prospects? To answer these questions, this Tutorial, in the context of CQD thin film and solar cell characterization, looks at trends in characterization technique development by comparing various conventional techniques in meeting research and/or industrial demands. For a good physical understanding of material properties, the basic physics of CQD materials and devices are reviewed first, followed by a detailed discussion of various characterization techniques and their suitability for CQD photovoltaic devices.

Monolithic Organic/Colloidal Quantum Dot Hybrid Tandem Solar Cells via Buffer Engineering.

Monolithically integrated hybrid tandem solar cells (TSCs) that combine solution-processed colloidal quantum dot (CQD) and organic molecules are a promising device architecture, able to complement the absorption across the visible to the infrared. However, the performance of organic/CQD hybrid TSCs has not yet surpassed that of single-junction CQD solar cells. Here, a strategic optical structure is devised to overcome the prior performance limit of hybrid TSCs by employing a multibuffer layer and a dual near-infrared (NIR) absorber. In particular, a multibuffer layer is introduced to solve the problem of the CQD solvent penetrating the underlying organic layer. In addition, the matching current of monolithic TSCs is significantly improved to 15.2 mA cm-2 by using a dual NIR organic absorber that complements the absorption of CQD. The hybrid TSCs reach a power conversion efficiency (PCE) of 13.7%, higher than that of the corresponding individual single-junction cells, representing the highest efficiency reported to date for CQD-based hybrid TSCs.

Monolayer Perovskite Bridges Enable Strong Quantum Dot Coupling for Efficient Solar Cells

Summary Solution-processed colloidal quantum dots (CQDs) are promising optoelectronic materials; however, CQD solids have, to date, exhibited either excellent transport properties but fusion among CQDs or limited transport when QDs are strongly passivated. Here, we report the growth of monolayer perovskite bridges among quantum dots and show that this enables the union of surface passivation with improved charge transport. We grow the perovskite layer after forming the CQD solid rather than introducing perovskite precursors into the quantum dot solution: the monolayer of perovskite increases interdot coupling and decreases the distance over which carriers must tunnel. As a result, we double the diffusion length relative to reference CQD solids and report solar cells that achieve a stabilized power conversion efficiency (PCE) of 13.8%, a record among Pb chalcogenide CQD solar cells.

Colloidal Quantum Dot Photovoltaics Using Ultrathin, Solution-Processed Bilayer In2O3/ZnO Electron Transport Layers with Improved Stability

Solution-processed colloidal quantum dot (CQD) photovoltaics (PVs) continue to mature with improvements in device architectures and ligand exchange strategies. Carrier selective contacts extract ph...

Enhanced optical path and electron diffusion length enable high-efficiency perovskite tandems

Tandem solar cells involving metal-halide perovskite subcells offer routes to power conversion efficiencies (PCEs) that exceed the single-junction limit; however, reported PCE values for tandems have so far lain below their potential due to inefficient photon harvesting. Here we increase the optical path length in perovskite films by preserving smooth morphology while increasing thickness using a method we term boosted solvent extraction. Carrier collection in these films – as made – is limited by an insufficient electron diffusion length; however, we further find that adding a Lewis base reduces the trap density and enhances the electron-diffusion length to 2.3 µm, enabling a 19% PCE for 1.63 eV semi-transparent perovskite cells having an average near-infrared transmittance of 85%. The perovskite top cell combined with solution-processed colloidal quantum dot:organic hybrid bottom cell leads to a PCE of 24%; while coupling the perovskite cell with a silicon bottom cell yields a PCE of 28.2%.

Solution-processed MoS2 quantum dot/GaAs vertical heterostructure based self-powered photodetectors with superior detectivity

The characteristics of a novel 0D/3D heterojunction photodetector fabricated using solution-processed colloidal MoS2 quantum dots (QDs) on GaAs is presented. MoS2 QDs with a dimension of ∼2 nm, synthesized by a standard sono-chemical exfoliation process with 2D layers have been used for the purpose. The microscopic and spectroscopic studies confirmed the formation of semiconducting (2H phase) MoS2 QDs. The photodetectors were fabricated using n-GaAs substrates with two different doping concentrations resulting in n–n heterojunctions between n-type 0D MoS2 QDs and bulk n-GaAs. The devices fabricated using GaAs with a higher doping concentration, showed an increase in the reverse current of the order of ∼102 upon illumination, while the same with a lower doping concentration showed an increase of the order of ∼103. All the heterojunction photodetector devices show a broadband operation over the visible wavelength range of 400–950 nm, with a peak responsivity of the devices being observed at 500 nm. The peak responsivity and detectivity are found to be ∼400 mA W−1 and ∼4 × 1012 Jones, respectively, even without any external applied bias, which are useful for self-powered photodetection. The results indicate that colloidal MoS2/GaAs based hybrid heterostructures provide a platform for fabricating broadband photodetectors by using highly absorbing MoS2 QDs, which may show the pathway towards next-generation optoelectronic devices with superior detection properties.

Tuning Solute-Redistribution Dynamics for Scalable Fabrication of Colloidal Quantum-Dot Optoelectronics.

Solution-processed colloidal quantum dots (CQDs) are attractive materials for the realization of low-cost and efficient optoelectronic devices. Although impressive CQD-solar-cell performance has been achieved, the fabrication of CQD films is still limited to laboratory-scale small areas because of the complicated deposition of CQD inks. Large-area, uniform deposition of lead sulfide (PbS) CQD inks is successfully realized for photovoltaic device applications by engineering the solute redistribution of CQD droplets. It is shown experimentally and theoretically that the solute-redistribution dynamics of CQD droplets are highly dependent on the movement of the contact line and on the evaporation kinetics of the solvent. By lowering the friction constant of the contact line and increasing the evaporation rate of the droplets, a uniform deposition of CQD ink in length and width over large areas is realized. By utilizing a spray-coating process, large-area (up to 100 cm2 ) CQD films are fabricated with 3-7% thickness variation on various substrates including glass, indium tin oxide glass, and polyethylene terephthalate. Furthermore, scalable fabrication of CQD solar cells is demonstrated with 100 cm2 CQD films which exhibits a notably high efficiency of 8.10%.

Robust lasing modes in coupled colloidal quantum dot microdisk pairs using a non-Hermitian exceptional point

Evanescently coupled pairs of microdisk lasers have emerged as a useful platform for studying the non-Hermitian physics of exceptional points. It remains an open question how scalable and versatile such phenomena can be when carried over to other designs. Here we have studied the effect of gain/loss modulation in an evanescently coupled pair of microdisk optical resonators fabricated from solution-processed colloidal quantum dots. The emission spectra of these structures are sensitive to small imperfections, which cause frequency-splitting of the whispering gallery modes. Despite this inherent disorder, we found that when spatially modulating the optical pump to vary the gain differential between the coupled microdisks, the coupling drives the split parasitic intra-cavity modes into coalescence at an exceptional point of the resulting three-mode system. This unusual behavior is rationalized via a Hamiltonian that incorporates the intra-cavity coupling as well as the anisotropic inter-cavity coupling between modes in the microdisk pair.

Deterministic Positioning of Colloidal Quantum Dots on Silicon Nitride Nanobeam Cavities.

Engineering an array of precisely located cavity-coupled active media poses a major experimental challenge in the field of hybrid integrated photonics. We deterministically position solution-processed colloidal quantum dots (QDs) on high quality (Q)-factor silicon nitride nanobeam cavities and demonstrate light-matter coupling. By lithographically defining a window on top of an encapsulated cavity that is cladded in a polymer resist, and spin coating the QD solution, we can precisely control the placement of the QDs, which subsequently couple to the cavity. We show rudimentary control of the number of QDs coupled to the cavity by modifying the size of the window. Furthermore, we demonstrate Purcell enhancement and saturable photoluminescence in this QD-cavity platform. Finally, we deterministically position QDs on a photonic molecule and observe QD-coupled cavity supermodes. Our results pave the way for precisely controlling the number of QDs coupled to a cavity by engineering the window size, the QD dimension, and the solution chemistry and will allow advanced studies in cavity enhanced single photon emission, ultralow power nonlinear optics, and quantum many-body simulations with interacting photons.

Hybrid tandem quantum dot/organic photovoltaic cells with complementary near infrared absorption.

Monolithically integrated hybrid tandem solar cells that effectively combine solution-processed colloidal quantum dot (CQD) and organic bulk heterojunction subcells to achieve tandem performance that surpasses the individual subcell efficiencies have not been demonstrated to date. In this work, we demonstrate hybrid tandem cells with a low bandgap PbS CQD subcell harvesting the visible and near-infrared photons and a polymer:fullerene-poly (diketopyrrolopyrrole-terthiophene) (PDPP3T):[6,6]-phenyl-C60-butyric acid methyl ester (PC61BM)-top cell absorbing effectively the red and near-infrared photons of the solar spectrum in a complementary fashion. The two subcells are connected in series via an interconnecting layer (ICL) composed of a metal oxide layer, a conjugated polyelectrolyte, and an ultrathin layer of Au. The ultrathin layer of Au forms nano-islands in the ICL, reducing the series resistance, increasing the shunt resistance, and enhancing the device fill-factor. The hybrid tandems reach a power conversion efficiency (PCE) of 7.9%, significantly higher than the PCE of the corresponding individual single cells, representing one of the highest efficiencies reported to date for hybrid tandem solar cells based on CQD and polymer subcells.

Temperature- and ligand-dependent carrier transport dynamics in photovoltaic PbS colloidal quantum dot thin films using diffusion-wave methods

Solution-processed colloidal quantum dots (CQDs) are promising candidates for large-scale, low-cost, and lightweight photovoltaic and electronic devices. Carrier transport dynamics has a substantial impact on device efficiency optimization. Coupled with photocarrier radiometry (PCR) — a dynamic spectrally integrated frequency-domain photoluminescence (PL) modality, we report the derivation of a trap-state-mediated carrier hopping transport model for the extraction of multiple carrier transport parameters in PbS CQD thin films. These parameters, including effective carrier lifetime τE, hopping diffusivity Dh, trap-state-dependent carrier trapping rate RT, diffusion length Lh, and carrier thermal emission rate ei, were obtained for CQD thin films with different dot size and capping ligands: tetrabutylammonium iodide (TBAI), 1,2-ethanedithiol (EDT), and methylammonium lead triiodide perovskite (MAPbI3). Consistent with the framework of phonon-assisted carrier hopping mechanism, τE, Dh, and Lh have demonstrated a monotonic dependence on temperature in the range from 100 K to 300 K. Perovskite-passivated PbS CQD thin films, especially those with larger dot sizes which are free of apparent defect induced PL emission and have higher τE and Dh at room temperature (ca. 0.51μs and 1.80×10−2cm2/s, respectively) than their counterparts, demonstrate better photovoltaic material properties. Dot-size-dependent exciton binding energies (35.21–53.20meV) were characterized using a dynamic PCR photo-thermal spectroscopy that also characterized the trap-state-mediated carrier hopping activation energies in the range from 100meV to 280meV. To test the reliability of the best-fitted results, computational fitting uniqueness was examined using a parametric theory.