Solubility Tag Research Articles

Determining Zebrafish Epitope Reactivity to Commercially Available Antibodies

Antibodies are produced by the immune system as a defense against foreign proteins due to their ability to bind with these molecules with a high degree of specificity. The highly specific nature of antibody/antigen interaction has made them of great use in a variety of applications that identify the presence of the protein antigen, including western blotting and immunohistochemistry. Zebrafish (Danio rerio) is a versatile model genetic organism that has been pivotal for numerous studies of vertebrate physiology. Historically, there were very few antibodies developed specifically against zebrafish proteins. Therefore, many studies used antibodies against human protein homologs to identify zebrafish proteins. However, the evolutionary ancestor of zebrafish experienced a whole genome duplication event. As a result, the zebrafish genome expresses several paralogs of many genes that have only a single homolog in most other vertebrates. This presents an interesting problem: can the antibodies raised against human proteins be relied upon to identify and discriminate between the different paralogs of zebrafish genes? To test the epitope conservation between human and zebrafish homologs, we tested a commercial antibody against the human melatonin receptor protein 1 (MTNR) for cross‐reactivity with putative zebrafish epitopes. Zebrafish express six paralogs of this protein: Mtnr1Aa, Mtnr1Ab, Mtnr1A‐like, Mtnr1Ba, Mtnr1Bb, and Mtnr1C. The putative epitope binding regions of these proteins display a variety of evolutionary conservation. These peptide sequences were cloned into a bacterial expression vector between an N‐terminal SUMO solubility tag and a C‐terminal 6xHis affinity purification tag. Following expression in Rosetta (DE3) E. coli, the fusion proteins were purified via nickel affinity column. Western blotting was carried out with anti‐His and anti‐human MTNR1 probes.The zebrafish Mtnr1A subtype demonstrated cross‐reactivity with anti‐human MTNR1, In contrast, the Mtrn1B and Mtnr1C subtypes were not recognized at all. Interestingly, the Mtnr1C protein contains only conservative differences in amino acid sequence from the human MTNR1. These data conclusively show that the proteins being detected in immunohistochemical assays with this antibody are of the Mtrn1A subtype. Additionally, this project demonstrates the importance of validating antibody specificity through experimental means to ensure that the protein(s) of interest is indeed being detected.Support or Funding InformationNational Science Foundation (DBI‐0821252)

Proline dehydrogenase from Thermus thermophilus does not discriminate between FAD and FMN as cofactor

Flavoenzymes are versatile biocatalysts containing either FAD or FMN as cofactor. FAD often binds to a Rossmann fold, while FMN prefers a TIM-barrel or flavodoxin-like fold. Proline dehydrogenase is denoted as an exception: it possesses a TIM barrel-like fold while binding FAD. Using a riboflavin auxotrophic Escherichia coli strain and maltose-binding protein as solubility tag, we produced the apoprotein of Thermus thermophilus ProDH (MBP-TtProDH). Remarkably, reconstitution with FAD or FMN revealed that MBP-TtProDH has no preference for either of the two prosthetic groups. Kinetic parameters of both holo forms are similar, as are the dissociation constants for FAD and FMN release. Furthermore, we show that the holo form of MBP-TtProDH, as produced in E. coli TOP10 cells, contains about three times more FMN than FAD. In line with this flavin content, the crystal structure of TtProDH variant ΔABC, which lacks helices αA, αB and αC, shows no electron density for an AMP moiety of the cofactor. To the best of our knowledge, this is the first example of a flavoenzyme that does not discriminate between FAD and FMN as cofactor. Therefore, classification of TtProDH as an FAD-binding enzyme should be reconsidered.

Recombinant expression and characterization of a L-amino acid oxidase from the fungus Rhizoctonia solani.

L-Amino acid oxidases (L-AAOs) catalyze the oxidative deamination of L-amino acids to the corresponding α-keto acids, ammonia, and hydrogen peroxide. L-AAOs are homodimeric enzymes with FAD as a non-covalently bound cofactor. They are of potential interest for biotechnological applications. However, heterologous expression has not succeeded in producing large quantities of active recombinant L-AAOs with a broad substrate spectrum so far. Here, we report the heterologous expression of an active L-AAO from the fungus Rhizoctonia solani in Escherichia coli as a fusion protein with maltose-binding protein (MBP) as a solubility tag. After purification, it was possible to remove the MBP-tag proteolytically without influencing the enzyme activity. MBP-rsLAAO1 and 9His-rsLAAO1 converted basic and large hydrophobic L-amino acids as well as methyl esters of these L-amino acids. The progress of the conversion of L-phenylalanine and L-leucine into the corresponding α-keto acids was determined by HPLC and 1H-NMR analysis of reaction mixtures, respectively. Enzymatic activity was stimulated 50-100-fold by SDS treatment. K m values ranging from 0.9-10mM and v max values from 3 to 10Umg-1 were determined after SDS activation of 9His-rsLAAO1 for the best substrates. The enzyme displayed a broad pH optimum between pH 7.0 and 9.5. In summary, a successful overexpression of recombinant L-AAO in E. coli was established that results in a promising enzymatic activity and a broad substrate spectrum for biotechnological application.

Production of Computationally Designed Small Soluble- and Membrane-Proteins: Cloning, Expression, and Purification.

This book chapter focuses on expression and purification of computationally designedsmall solubleproteins and membrane proteinsthat are ordinarily difficult to express in good amounts for experiments. Over-expression of such proteins can be achieved by using the solubility tag such as maltose binding protein (MBP), Thioredoxin (Trx), and Gultathione-S-transferase (GST) fused to the protein of interest. Here, we describe and provide the protocols for cloning,expression and purification of such proteinsusing the solubility tag.

A Cas9-based toolkit to program gene expression in Saccharomyces cerevisiae.

Despite the extensive use of Saccharomyces cerevisiae as a platform for synthetic biology, strain engineering remains slow and laborious. Here, we employ CRISPR/Cas9 technology to build a cloning-free toolkit that addresses commonly encountered obstacles in metabolic engineering, including chromosomal integration locus and promoter selection, as well as protein localization and solubility. The toolkit includes 23 Cas9-sgRNA plasmids, 37 promoters of various strengths and temporal expression profiles, and 10 protein-localization, degradation and solubility tags. We facilitated the use of these parts via a web-based tool, that automates the generation of DNA fragments for integration. Our system builds upon existing gene editing methods in the thoroughness with which the parts are standardized and characterized, the types and number of parts available and the ease with which our methodology can be used to perform genetic edits in yeast. We demonstrated the applicability of this toolkit by optimizing the expression of a challenging but industrially important enzyme, taxadiene synthase (TXS). This approach enabled us to diagnose an issue with TXS solubility, the resolution of which yielded a 25-fold improvement in taxadiene production.

A more polar N-terminal helix releases MBP-tagged Thermus thermophilus proline dehydrogenase from tetramer-polymer self-association

Proline dehydrogenase (ProDH) is a ubiquitous flavoenzyme involved in the biosynthesis of l-glutamate. ProDH is of interest for biocatalysis because the protein might be applied in multi-enzyme reactions for the synthesis of structurally complex molecules. We recently demonstrated that the thermotolerant ProDH from Thermus thermophilus (TtProDH) is overproduced in Escherichia coli when using maltose-binding protein (MBP) as a solubility tag. However, MBP-TtProDH and MBP-clipped TtProDH are prone to aggregation through non-native self-association. Here we provide evidence that the hydrophobic N-terminal helix of TtProDH is responsible for the self-association process. The more polar MBP-tagged F10E/L12E variant exclusively forms tetramers and exhibits excellent catalytic features over a wide range of temperatures. Understanding the hydrodynamic and catalytic properties of thermostable enzymes is important for the development of industrial biocatalysts as well as for pharmaceutical applications.

High-throughput recombinant protein expression in Escherichia coli: current status and future perspectives.

The ease of genetic manipulation, low cost, rapid growth and number of previous studies have made Escherichia coli one of the most widely used microorganism species for producing recombinant proteins. In this post-genomic era, challenges remain to rapidly express and purify large numbers of proteins for academic and commercial purposes in a high-throughput manner. In this review, we describe several state-of-the-art approaches that are suitable for the cloning, expression and purification, conducted in parallel, of numerous molecules, and we discuss recent progress related to soluble protein expression, mRNA folding, fusion tags, post-translational modification and production of membrane proteins. Moreover, we address the ongoing efforts to overcome various challenges faced in protein expression in E. coli, which could lead to an improvement of the current system from trial and error to a predictable and rational design.

High Level Expression and Purification of Recombinant Proteins from Escherichia coli with AK-TAG.

Adenylate kinase (AK) from Escherichia coli was used as both solubility and affinity tag for recombinant protein production. When fused to the N-terminus of a target protein, an AK fusion protein could be expressed in soluble form and purified to near homogeneity in a single step from Blue-Sepherose via affinity elution with micromolar concentration of P1, P5- di (adenosine—5’) pentaphosphate (Ap5A), a transition-state substrate analog of AK. Unlike any other affinity tags, the level of a recombinant protein expression in soluble form and its yield of recovery during each purification step could be readily assessed by AK enzyme activity in near real time. Coupled to a His-Tag installed at the N-terminus and a thrombin cleavage site at the C terminus of AK, the streamlined method, here we dubbed AK-TAG, could also allow convenient expression and retrieval of a cleaved recombinant protein in high yield and purity via dual affinity purification steps. Thus AK-TAG is a new addition to the arsenal of existing affinity tags for recombinant protein expression and purification, and is particularly useful where soluble expression and high degree of purification are at stake.

Activity of the Human Rhinovirus 3C Protease Studied in Various Buffers, Additives and Detergents Solutions for Recombinant Protein Production.

Proteases are widely used to remove affinity and solubility tags from recombinant proteins to avoid potential interference of these tags with the structure and function of the fusion partner. In recent years, great interest has been seen in use of the human rhinovirus 3C protease owing to its stringent sequence specificity and enhanced activity. Like other proteases, activity of the human rhinovirus 3C protease can be affected in part by the buffer components and additives that are generally employed for purification and stabilization of proteins, hence, necessitate their removal by tedious and time-consuming procedures before proteolysis can occur. To address this issue, we examined the effect of elution buffers used for common affinity based purifications, salt ions, stability/solubility and reducing agents, and detergents on the activity of the human rhinovirus 3C protease using three different fusion proteins at 4°C, a temperature of choice for purification of many proteins. The results show that the human rhinovirus 3C protease performs better at 4°C than the frequently used tobacco etch virus protease and its activity was insensitive to most of the experimental conditions tested. Though number of fusion proteins tested is limited, we expect that these finding will facilitate the use of the human rhinovirus 3C protease in recombinant protein production for pharmaceutical and biotechnological applications.

Rapid addition of unlabeled silent solubility tags to proteins using a new substrate-fused sortase reagent.

Many proteins can't be studied using solution NMR methods because they have limited solubility. To overcome this problem, recalcitrant proteins can be fused to a more soluble protein that functions as a solubility tag. However, signals arising from the solubility tag hinder data analysis because they increase spectral complexity. We report a new method to rapidly and efficiently add a non-isotopically labeled Small Ubiquitin-like Modifier protein (SUMO) solubility tag to an isotopically labeled protein. The method makes use of a newly developed SUMO-Sortase tagging reagent in which SUMO and the Sortase A (SrtA) enzyme are present within the same polypeptide. The SUMO-Sortase reagent rapidly attaches SUMO to any protein that contains the sequence LPXTG at its C-terminus. It modifies proteins at least 15-times faster than previously described approaches, and does not require active dialysis or centrifugation during the reaction to increase product yields. In addition, silently tagged proteins are readily purified using the well-established SUMO expression and purification system. The utility of the SUMO-Sortase tagging reagent is demonstrated using PhoP and green fluorescent proteins, which are ~90% modified with SUMO at room temperature within four hours. SrtA is widely used as a tool to construct bioconjugates. Significant rate enhancements in these procedures may also be achieved by fusing the sortase enzyme to its nucleophile substrate.

A rapid solubility-optimized screening procedure for recombinant subtilisins in E. coli

Subtilisins and other serine proteases are extensively used in the detergent, leather and food industry, and frequently under non-physiological conditions. New proteases with improved performance at extreme temperatures and in the presence of chemical additives may have great economical potential. The increasing availability of genetic sequences from different environments makes homology-based screening an attractive strategy for discovery of new proteases. A prerequisite for large-scale screening of protease-encoding sequences is an efficient screening procedure. We have developed and implemented a screening procedure that encompasses cloning of candidate sequences into multiple expression vectors, cytoplasmic expression in E. coli, and a casein-based functional screen. The procedure is plate-format compatible and can be completed in only four days, starting from the gene of interest in a suitable cloning vector. The expression vector suite includes six vectors with combinations of maltose-binding protein (MBP) or the small ubiquitin-related modifier (SUMO) for increased solubility, and polyhistidine tags for downstream purification. We used enhanced green fluorescent protein and four Bacilli subtilisins to validate the screening procedure and our results show that proteins were expressed, soluble and active. Interestingly, the highest activities were consistently achieved with either MBP or SUMO fusions, thus demonstrating the merit of including solubility tags. In conclusion, the results demonstrate that our approach can be used to efficiently screen for new subtilisins, and suggest that the approach may also be used to screen for proteins with other activities.

Sequence Directed Formation of Covalent Protein-DNA Bonds

We have developed a novel method for linking proteins to DNA based on the HUH endonuclease family. HUH endonucleases are involved in replication of ssDNA in viruses and mobile bacterial plasmids. The HUH domain of the endonuclease nicks ssDNA at a specific sequence near the origin of replication, resulting in formation of a covalent phosphotyrosine intermediate between the DNA and catalytic tyrosine in the HUH protein. We have adapted these nucleases into small, soluble protein tags which robustly react with unmodified single-stranded DNA to form stable covalent bonds. We have shown that five of these proteins react with fully orthogonal DNA sequences and can be used for “one-pot”, site-specific labeling of complex structures. Three tags have shown robust activity in cultured mammalian cells, allowing single-step DNA-based fluorescent labeling of fusion proteins. We believe that this technology can expand the possibilities for DNA nanotechnology, both in vitro and in cultured cells.

Overexpression of Soluble Recombinant Human Lysyl Oxidase by Using Solubility Tags: Effects on Activity and Solubility.

Lysyl oxidase is an important extracellular matrix enzyme that has not been fully characterized due to its low solubility. In order to circumvent the low solubility of this enzyme, three solubility tags (Nus-A, Thioredoxin (Trx), and Glutathione-S-Transferase (GST)) were engineered on the N-terminus of mature lysyl oxidase. Total enzyme yields were determined to be 1.5 mg for the Nus-A tagged enzyme (0.75 mg/L of media), 7.84 mg for the Trx tagged enzyme (3.92 mg/L of media), and 9.33 mg for the GST tagged enzyme (4.67 mg/L of media). Enzymatic activity was calculated to be 0.11 U/mg for the Nus-A tagged enzyme and 0.032 U/mg for the Trx tagged enzyme, and no enzymatic activity was detected for the GST tagged enzyme. All three solubility-tagged forms of the enzyme incorporated copper; however, the GST tagged enzyme appears to bind adventitious copper with greater affinity than the other two forms. The catalytic cofactor, lysyl tyrosyl quinone (LTQ), was determined to be 92% for the Nus-A and Trx tagged lysyl oxidase using the previously reported extinction coefficient of 15.4 mM−1 cm−1. No LTQ was detected for the GST tagged lysyl oxidase. Given these data, it appears that Nus-A is the most suitable tag for obtaining soluble and active recombinant lysyl oxidase from E. coli culture.

Complex Acylation of Angiotensin II by N-Hydroxysulfosuccinimide linked Biotin Reagents

N-Hydroxysulfosuccinimide-linked biotins (sulfoNHS-biotins) are water soluble biotin tags commonly used to conjugate a biotin moiety to proteins by rapid N-acylation of primary amines. Unexpected O-acylation by sulfoNHSbiotin on tyrosine of Angiotensin II (Ag-II) and an acylation on third site unable to characterize were identified by LC-MS in addition to the expected N-acylation on the N-terminal of Ag-II. The N-acylation only undergoes incomplete hydrolysis in 0.1% formic acid not at pH 7.2 and 8.0, while two unexpected acylation hydrolyze at both conditions, but their hydrolysis in 0.1% formic acid was much more rapid. Dithiothreitol treatment selectively catalyzed hydrolysis of both of the unexpected acylation but not the N-acylation of Ag-II. The maximum yield of O-acylation of the Ag- II tyrosine was 99% at pH 7.2 and 95% at pH 8.0 as compared N-acylation of lysine when reacted with excess sulfoNHS-biotin with these yields of 94% at pH 7.2 and 96% at pH 8.0. Acylation of the third uncharacterized site of Ag-II showed maximum yield of approximately 17% at pH 7.2, but higher yield (≥ 47%) at pH 8.0 within 30 min. The unexpected O-acylation of the Ag-II tyrosine occurred within 1 min at either pH 7.2 or pH 8.0, as rapidly as the N-acylation, while the other unexpected acylation required more time to complete at pH 8.0.

Expression platforms for producing eukaryotic proteins: a comparison of E. coli cell-based and wheat germ cell-free synthesis, affinity and solubility tags, and cloning strategies.

Vectors designed for protein production in Escherichia coli and by wheat germ cell-free translation were tested using 21 well-characterized eukaryotic proteins chosen to serve as controls within the context of a structural genomics pipeline. The controls were carried through cloning, small-scale expression trials, large-scale growth or synthesis, and purification. Successfully purified proteins were also subjected to either crystallization trials or (1)H-(15)N HSQC NMR analyses. Experiments evaluated: (1) the relative efficacy of restriction/ligation and recombinational cloning systems; (2) the value of maltose-binding protein (MBP) as a solubility enhancement tag; (3) the consequences of in vivo proteolysis of the MBP fusion as an alternative to post-purification proteolysis; (4) the effect of the level of LacI repressor on the yields of protein obtained from E. coli using autoinduction; (5) the consequences of removing the His tag from proteins produced by the cell-free system; and (6) the comparative performance of E. coli cells or wheat germ cell-free translation. Optimal promoter/repressor and fusion tag configurations for each expression system are discussed.

Expression and purification of short hydrophobic elastin-like polypeptides with maltose-binding protein as a solubility tag

Elastin-like polypeptides (ELPs) are biodegradable polymers with interesting physico-chemical properties for biomedical and biotechnological applications. The recombinant expression of hydrophobic elastin-like polypeptides is often difficult because they possess low transition temperatures, and therefore form aggregates at sub-ambient temperatures. To circumvent this difficulty, we expressed in Escherichia coli three hydrophobic ELPs (VPGIG)n with variable lengths (n=20, 40, and 60) in fusion with the maltose-binding protein (MBP). Fusion proteins were soluble and yields of purified MBP-ELP ranged between 66 and 127mg/L culture. After digestion of the fusion proteins by enterokinase, the ELP moiety was purified by using inverse transition cycling. The purified fraction containing ELP40 was slightly contaminated by traces of undigested fusion protein. Purification of ELP60 was impaired because of co-purification of the MBP tag during inverse transition cycling. ELP20 was successfully purified to homogeneity, as assessed by gel electrophoresis and mass spectrometry analyses. The transition temperature of ELP20 was measured at 15.4°C in low salt buffer. In conclusion, this method can be used to produce hydrophobic ELP of low molecular mass.

Use of adenylate kinase as a solubility tag for high level expression of T4 DNA ligase in Escherichia coli

The discovery of T4 DNA ligase in 1960s was pivotal in the spread of molecular biotechnology. The enzyme has become ubiquitous for recombinant DNA routinely practiced in biomedical research around the globe. Great efforts have been made to express and purify T4 DNA ligase to meet the world demand, yet over-expression of soluble T4 DNA ligase in E. coli has been difficult. Here we explore the use of adenylate kinase to enhance T4 DNA ligase expression and its downstream purification. E.coli adenylate kinase, which can be expressed in active form at high level, was fused to the N-terminus of T4 DNA ligase. The resulting His-tagged AK-T4 DNA ligase fusion protein was greatly over-expressed in E. coli, and readily purified to near homogeneity via two purification steps consisting of Blue Sepharose and Ni–NTA chromatography. The purified AK-T4 DNA ligase not only is fully active for DNA ligation, but also can use ADP in addition to ATP as energy source since adenylate kinase converts ADP to ATP and AMP. Thus adenylate kinase may be used as a solubility tag to facilitate recombinant protein expression as well as their downstream purification.

High yields of active Thermus thermophilus proline dehydrogenase are obtained using maltose-binding protein as a solubility tag.

Proline dehydrogenase (ProDH) catalyzes the FAD-dependent oxidation of proline to Δ(1) -pyrroline-5-carboxylate, the first step of proline catabolism in many organisms. Next to being involved in a number of physiological processes, ProDH is of interest for practical applications because the proline imino acid can serve as a building block for a wide range of peptides and antibiotics. ProDH is a membrane-associated protein and recombinant soluble forms of the enzyme have only been obtained in limited amounts. We here report on the heterologous production of ProDH from Thermus thermophilus (TtProDH) in Escherichia coli. Using maltose-binding protein as solubility tag, high yields of active holoenzyme are obtained. Native TtProDH can be produced from cleaving the purified fusion protein with trypsin. Size-exclusion chromatography shows that fused and clipped TtProDH form oligomers. Thermal stability and co-solvent tolerance indicate the conformational robustness of TtProDH. These properties together with the high yield make TtProDH attractive for industrial applications.

Cloning forever

Cloning forever

Total synthesis of elastin peptide using high pressure-liquid phase synthesis assisted by a soluble tag strategy.

A highly aggregating elastin peptide was prepared efficiently using a high pressure-liquid phase synthesis approach assisted by a soluble tag strategy. Two standard syringes were connected to each other to construct a reactor. This simple reactor was used to apply high pressure to the highly viscous reaction mixture thereby maintaining its fluidity. The reactions were completely inhibited due to aggregation when conducted in a standard flask reactor, whereas our high pressure approach accelerated the couplings to realize complete conversion within 5-7 min. All steps were conducted at 0.10 M concentration, affording grams of the desired product.