Soluble Ratio Research Articles

Exploration of Strawberry Fruit Quality During Harvest Season Under a Semi-Forcing Culture with Plants Nursed Without Chilling.

Strawberry, a profitable crop, adapts well to diverse environments. This study evaluated the stability of fruit quality in different strawberry varieties produced as green plants without chilling during the harvest season in northern Uruguay. The focus was on understanding the impact of harvest date versus agricultural practices (different orchards and growers) on key fruit quality variables such as color, firmness, sugars, and acidity. Results indicated that the INIA Yrupé variety showed greater stability in external coloration and sugar content across harvest dates, suggesting that standardizing fruit coloration is viable under challenging conditions. INIA Guapa consistently met minimum requirements for soluble solids and ratio, with stable acidity and red coloration. Firmness was positively correlated with ratio (r = 0.81) and negatively impacted by rainfall 2-3 days before harvest. The findings suggest that harvest date has a more significant impact on INIA Yrupé fruit quality than growing conditions or practices, with variability observed in firmness and ratio but minimal variation in fruit coloration. These insights highlight the importance of harvest timing for maintaining stable fruit quality traits, which is crucial for breeding programs and ensuring consistent sensory quality and crop profitability.

Assessing solubility of meloxicam in age-specific gastric and intestinal media relevant to adults and pediatric populations: implications for optimizing dosing in patients for postoperative pain

BackgroundOral dose formulations must be soluble in gastrointestinal fluids for systemic absorption. The solubility of meloxicam was determined in 16 different age-specific simulated gastric and intestinal media that mirrored the microenvironments in pediatrics and adults.MethodsThe solubility of meloxicam in the 16 different age-specific simulated gastric and intestinal biorelevant media was assessed using the standard US pharmacopeial method. The molecular descriptors of meloxicam were used to assess its intestinal permeability.ResultsMeloxicam exhibited low solubility in the age-specific simulated gastric media for fasted and fed states and in pediatrics and adults. Similarly, meloxicam exhibited low solubility in the age-specific simulated media that mirrored neonates fed cow milk-based formula. On the other hand, meloxicam exhibited high solubility in the rest of the age-specific pediatric and adult intestinal media that simulated the fasted and fed states. The pediatric-to-adult solubility ratios were outside the 80–125% range in 7 (58.3%) and was borderline in 1 (8.3%) out of the 12 calculated ratios. These findings indicated that the solubility of meloxicam showed clinically significant differences in 8 (66.7%) of the compared media.ConclusionMeloxicam exhibited low solubility in the age-specific simulated gastric media and high solubility in the simulated intestinal media for adults and pediatrics. Moreover, the pediatric-to-adult solubility ratios may have clinically significant implications. These differences can be translated into a higher likelihood of failing to demonstrate bioequivalence of different formulations containing meloxicam and variabilities in the performance of these formulations.

Dynamic Soluble IL-6R/Soluble gp130 Ratio as a Potential Indicator for the Prostate Malignancy Phenotype-A Multicenter Case-Control Study.

Prostate tumors, if prostate cancer or adenoma, represent a major public health challenge. Progress in research on inflammation has revealed a connection between inflammation, immunity, and cancer. In this context, this study aimed to find IL-6 signaling systemic abnormalities in the inflammatory tumor microenvironment. This study was case-controlled, multicentered, and included 86 patients, 43 diagnosed with BPH and 43 diagnosed with PCa, between January 2019 and January 2020. The study group was homogenous and the studied parameters were IL-6 complex (IL-6, soluble receptor IL-6R, soluble glycoprotein gp130), acute phase proteins (C reactive protein-CRP, acid alpha1 glycoprotein-AGPA, ferritin, albumin, transferrin), and oxidative stress-associated variables (malondialdehyde-MDA, carbonylated protein-PCO, 8-hydroxy-deoxy guanosine-8-OHdG, total antioxidant status-bTAS). The inflammatory microenvironment determined IL-6 signaling alterations (over-regulation of sIL-6R and suppression of sgp130 in PCa versus BPH), changes in acute phase reaction markers (increased serum levels of CRP, AGPA, ferritin, and decreased serum levels of albumin, transferrin) that were much more evident in PCa compared to BPH, an imbalance between macromolecular oxidative damage (MDA, PCO, 8-OHdG) and endogenous antioxidants (TAS) that was more accentuated in PCa compared with BPH, and a representative association between the sIL-6R/sgp130 ratio and inflammatory/oxidative stress-related factors only in PCa patients. Our study reconfirms the anterior concept that IL-6 promotes prostatic tumorigenesis. In this study, we first demonstrated that a high sIL-6R/sgp130 ratio facilitates prostate malignancy.

Syzgium cumini seed/poly vinyl alcohol based water resistant biodegradable nano-cellulose composite reinforced with zinc oxide and silver oxide nanoparticles for improved mechanical properties

The current work explored a comparative study of biodegradable jamun seed/polyvinyl alcohol (JS) nanocomposites reinforced with varying concentrations of ZnO and Ag2O nano-fillers. The effect of spherical shaped ZnO and Ag2O nanoparticles (NPs) on the on structure, morphology, swelling and solubility, crystallinity and mechanical properties together with biodegradation performance of the composite films was fully studied. SEM results showed uniform distribution of ZnO and Ag2O nanofillers into the JS matrix and dense or compact nanocomposite films were formed. JS-ZnO and JS-Ag2O nanocomposites with 0.5 wt% ZnO and Ag2O content showed maximum crystallinity i.e. 11.3 and 9.58 %, respectively, as determined by XRD. When compared to the virgin JS film (8.41 MPa), the resultant JS-ZnO-0.5 and JS-Ag2O-0.5 nanocomposites showed significantly enhanced tensile strength (35.7 MPa, 29.2 MPa), elongation at break (15.42 %, 14.62 %) and Young's modulus (141 MPa, 126 MPa), respectively. Also, reduced swelling (120.4 % and 116.1 %) and solubility ratio (17.45 % and 18.42 %) was observed for JS-ZnO-0.5 and JS-Ag2O-0.5 nanocomposites, respectively. Biodegradation results showed that maximum degradation (88 %) was achieved for the JS film within 180 days of soil burial whereas JS-ZnO-0.1 and JS-Ag2O-0.1 nanocomposites showed 78 % and 72 % degradation within 180 days, respectively.

Behavior of ponkan mandarin tree canopy grafted onto rangpur lime and flying dragon rootstocks

The Rangpur lime rootstock was the basis of Brazilian citrus growing for many years. However, this rootstock has been gradually replaced due to the occurrence of Citrus Sudden Death. The Flying Dragon rootstock has stood out as one of the options for replacement as it has different characteristics, such as reducing the size of the plant. There is no information in the literature about the behavior of Flying Dragon as a rootstock for Ponkan mandarin. Therefore, the objective of this study was to evaluate the behavior of Ponkan mandarin tree canopy grafted onto Rangpur lime and Flying Dragon rootstocks concerning physiological, agronomic, and fruit quality parameters. In the experiment, productivity, soil moisture, water potential, plant height, fruit diameter, fruit length, fruit mass, fruit pH, soluble solids content, titratable acidity, and ratio were evaluated. The Flying Dragon rootstock was responsible for the decrease in average productivity in the Ponkan mandarin culture. Greater plant heights were obtained when canopies were grafted on Rangpur lime. The soluble solids content of fruits from scions grafted on Flying Dragon was higher, but the degree of uniformity of the soluble solids values obtained from the Rangpur lime tree was higher.

A novel strategy of bloom forming cyanobacteria Microcystis sp. in response to phosphorus deficiency: Using non-phosphorus lipids substitute phospholipids

Despite significant reductions in phosphorus (P) loads, lakes still experience cyanobacterial blooms. Little is known regarding cellular P regulation in response to P deficiency in widely distributed bloom causing species such as Microcystis. In this study, we investigated changes in P containing and non-P lipids contents and their ratios concomitantly with the determinations of expression levels of genes encoding these lipids in cultural and field Microcystis samples. In the culture, the content of phosphatidylglycerol (PG) decreased from 2.1 μg g-1 in P replete control to 1.2 μg g-1 in P-deficient treatment, while non-P lipids, like sulfoquinovosyldiacylglycerol (SQDG) and monogalactosyldiacylglycerol (MGDG), increased dramatically from 13.6 μg g-1 to 142.3 μg g-1, and from 0.9 μg g-1 to 16.74 μg g-1, respectively. The expression of the MGDG synthesis gene, mgdE, also increased under low P conditions. Significant positive relationships between soluble reactive phosphorus (SRP) and ratios of P-containing lipids (PG) to non-P lipids, including SQDG, MGDG and digalactosyldiacylglycerol (DGDG) (P < 0.05) were observed in the field investigations. Both cultural and field data indicated that Microcystis sp. might increase non-P lipids proportion to lower P demand when suffering from P deficiency. Furthermore, despite lipid remodeling, photosynthetic activity remained stable, as indicated by comparable chlorophyll fluorescence and Fv/Fm ratios among cultural treatments. These findings suggested that Microcystis sp. may dominate in P-limited environments by substituting glycolipids and sulfolipids for phospholipids to reduce P demand without compromising the photosynthetic activity. This effective strategy in response to P deficiency meant a stricter P reduction threshold is needed in terms of Microcystis bloom control.

Improvement of mechanical, barrier properties, and water resistance of konjac glucomannan/curdlan film by zein addition and the coating for cherry tomato preservation

The mechanical, barrier properties, and water resistance of packaging materials are crucial for the preservation of fruits and vegetables. In this study, zein was incorporated as a hydrophobic substance into the konjac glucomannan (KGM)/curdlan (KC) system. The KC/zein (KCZ) showed good compatibility with the zein aggregates uniformly distributed in the network formed by an entanglement of KGM and curdlan micelles based on hydrogen bonds. The presence of zein inhibited the extension of the KC entangled structure and enhanced the solid-like behavior. The high content of zein (>6 %) increased zein aggregation and negatively affected the structure and properties of KCZ. The zein addition significantly improved the water vapor permeability, tensile strength, and elongation at break. The hydrophobicity of the KCZ films was significantly enhanced, accompanied by the water contact angle increasing from 81° to 112°, and the moisture content, swelling, and soluble solid loss ratio decreasing apparently. The K56C40Z4 coating exhibited an excellent preservation effect to inhibit the respiration of cherry tomatoes, significantly reducing the water loss and firmness decline and maintaining the appearance, total solid, total acid, and ascorbic acid content. This work provided a strategy to fabricate hydrophobic packaging for the preservation of fruits and vegetables.

Abraham General Solvation Parameter Model: Predictive Expressions for Solute Transfer into Isobutyl Acetate

Mole fraction of solubilities are reported for the: o-acetoacetanisidide, anthracene, benzoin, 4-tert-butylbenzoic acid, 3-chlorobenzoic acid, 3-chlorobenzoic acid, 2-chloro-5-nitrobenzoic acid, 4-chloro-3-nitrobenzoic acid, 3,4-dichlorobenzoic acid, 2,3-dimethoxybenzoic acid, 3,4-dimethoxybenzoic acid, 3,5-dimethoxybenzoic acid, 3,5-dinitrobenzoic acid, diphenyl sulfone, 2-ethylanthraquinone, 2-methoxybenzoic acid, 4-methoxybenzoic acid, 2-methylbenzoic acid, 3-methylbenzoic acid, 2-methyl-3-nitrobenzoic acid, 3-methyl-4-nitrobenzoic acid, 4-methyl-3-nitrobenzoic acid, 2-naphthoxyacetic acid, 3-nitrobenzoic acid, 4-nitrobenzoic acid, salicylamide, thioxanthene-9-one, 3,4,5-trimethoxybenzoic acid, and xanthene dissolved in isobutyl acetate at 298.15 K. The results of our experimental measurements, combined with the published literature data, were used to obtain Abraham model equations for isobutyl acetate. The mathematical correlations presented in the current study describe the observed molar solubility ratios of the solutes dissolved in isobutyl acetate to within an overall standard deviation of 0.12 log units or less.

Predictions of biorelevant solubility change during dispersion and digestion of lipid-based formulations

Computational approaches are increasingly explored in development of drug products, including the development of lipid-based formulations (LBFs), to assess their feasibility for achieving adequate oral absorption at an early stage. This study investigated the use of computational pharmaceutics approaches to predict solubility changes of poorly soluble drugs during dispersion and digestion in biorelevant media. Concentrations of 30 poorly water-soluble drugs were determined pre- and post-digestion with in-line UV probes using the MicroDISS Profiler™. Generally, cationic drugs displayed higher drug concentrations post-digestion, whereas for non-ionized drugs there was no discernible trend between drug concentration in dispersed and digested phase. In the case of anionic drugs there tended to be a decrease or no change in the drug concentration post-digestion. Partial least squares modelling was used to identify the molecular descriptors and drug properties which predict changes in solubility ratio in long-chain LBF pre-digestion (R2 of calibration = 0.80, Q2 of validation = 0.64) and post-digestion (R2 of calibration = 0.76, Q2 of validation = 0.72). Furthermore, multiple linear regression equations were developed to facilitate prediction of the solubility ratio pre- and post-digestion. Applying three molecular descriptors (melting point, LogD, and number of aromatic rings) these equations showed good predictivity (pre-digestion R2 = 0.70, and post-digestion R2 = 0.68). The model developed will support a computationally guided LBF strategy for emerging poorly water-soluble drugs by predicting biorelevant solubility changes during dispersion and digestion. This facilitates a more data-informed developability decision making and subsequently facilitates a more efficient use of formulation screening resources.

Efficient Determination of Critical Water Activity and Classification of Hydrate-Anhydrate Stability Relationship

For a pair of hydrated and anhydrous crystals, the hydrate is more stable than the anhydrate when the water activity is above the critical water activity (awc). Conventional methods to determine awc are based on either hydrate-anhydrate competitive slurries at different aw or solubilities measured at different temperatures. However, these methods are typically resource-intensive and time-consuming. Here, we present simple and complementary solution- and solid-based methods and illustrate them using carbamazepine and theophylline. In the solution-based method, awc can be predicted using intrinsic dissolution rate (IDR) ratio or solubility ratio of the hydrate-anhydrate pair measured at a known water activity. In the solid-based method, awc is predicted as a function of temperature from the dehydration temperature and enthalpy obtained by differential scanning calorimetry (DSC) near a water activity of unity. For carbamazepine and theophylline, the methods yielded awc values in good agreement with those from the conventional methods. By incorporating awc as an additional variable, the hydrate-anhydrate relationship is categorized into four classes based on their dehydration temperature (Td) and enthalpy (ΔHd) in analogy with the monotropy/enantiotropy classification for crystal polymorphs. In Class 1 (ΔHd< 0 and Td ≥ 373 K), no awc exists. In Class 2 (ΔHd>0andTd≥373K), awc always exists under conventional crystallization conditions. In Class 3 (ΔHd<0andTd<373K), awc exists when T>Td. In Class 4 (ΔHd>0andTd<373K), awc exists only when T<Td. The hydrate-anhydrate pairs of carbamazepine and theophylline belong to Class 4.

The antidepressant effect of whole-body hyperthermia is associated with the classical interleukin-6 signaling pathway

There is urgent need for novel antidepressant treatments that confer therapeutic benefits via engagement with identified mechanistic targets. The objective of the study was to determine whether activation of the classical anti-inflammatory interleukin-6 signaling pathways is associated with the antidepressant effects of whole-body hyperthermia. A 6-week, randomized, double-blind study compared whole-body hyperthermia with a sham condition in a university-based medical center. Medically healthy participants aged 18–65 years who met criteria for major depressive disorder, were free of psychotropic medication use, and had a baseline 17-item Hamilton Depression Rating Scale score ≥ 16 were randomized with 1-to-1 allocation in blocks of 6 to receive whole-body hyperthermia or sham. Of 338 individuals screened, 34 were randomized, 30 received interventions and 26 had ≥ 2 blood draws and depressive symptom assessments. Secondary data analysis examined change in the ratio of IL-6:soluble IL-6 receptor pre-intervention, post-intervention, and at weeks 1 and 4. Hierarchical linear modeling tested whether increased IL-6:soluble IL-6 receptor ratio post-intervention was associated with decreased depressive symptom at weeks 1, 2, 4 and 6 for those randomized to whole-body hyperthermia. Twenty-six individuals were randomized to whole-body hyperthermia [n = 12; 75 % female; age = 37.9 years (SD = 15.3) or sham [n = 14; 57.1 % female; age = 41.1 years (SD = 12.5). When compared to the sham condition, active whole-body hyperthermia only increased the IL-6:soluble IL-6 receptor ratio post-treatment [F(3,72) = 11.73,p < .001], but not pre-intervention or at weeks 1 and 4. Using hierarchical linear modeling, increased IL-6:sIL-6R ratio following whole-body hyperthermia moderated depressive symptoms at weeks 1, 2, 4 and 6, such that increases in the IL-6:soluble IL-6 receptor ratio were associated with decreased depressive symptoms at weeks 1, 2, 4 and 6 for those receiving the active whole-body hyperthermia compared to sham treatment (B = –229.44, t = -3.82,p < .001). Acute activation of classical intereukin-6 signaling might emerge as a heretofore unrecognized novel mechanism that could be harnessed to expand the antidepressant armamentarium.

The development of ternary and quaternary solid dispersion based hydrotropic blends of atorvastatin calcium

Background and objective: Atorvastatin calcium (ATV) has a solubility in aqueous solutions of greater than 0.1 mg/ml to less than 1 mg/ml, which is very slightly soluble. When developing dosage forms for these medications, formulation scientists still face challenges. This study's goal was to use various hydrotropic agents in the formation of solid dispersion-based hydrotropic blends to improve the solubility properties of atorvastatin calcium. Methods: In this study, twenty-two distinct binary, ternary, and quaternary formulations of ATV were prepared by employing five different hydrotropic agents and combining at least two hydrotropic agents in concentrations of 10% and 20% (w/v). Moreover, solid dispersion by the solvent evaporation method and physical mixture-based hydrotropic blends in the ratio of (1:2) have been formulated. The produced formulations were characterized using an FTIR analysis. Results: According to the findings, binary formulations containing 20% (w/v) concentrations of sodium benzoate (SB), sodium salicylate (SS), and resorcinol (R) enhanced the solubility ratio of ATV by 439.31, 689.57, and 106.21 folds, respectively. Furthermore, ternary formulations (FT14) and quaternary formulations (FQ18) resulted in the enhancement of ATV solubility by 938.45 and 995.12 folds, respectively. Ternary solid dispersion demonstrated the highest enhancement in solubility ratio by 87.68 folds and resulted in a higher dissolution rate of ATV than pure samples of the drug. Finally, FTIR analyses excluded any interactions between medications and excipients by showing no noticeable shift in the peaks. Conclusion: Solid dispersion based hydrotropic blends can provide the production of the dosage forms of practically insoluble drugs with a favorable enhancement ratio in solubility.

Effect of Gibberellic Acid and Cytokinin on Growth, Quality and Yield of French Bean (Phaseolus vulgaris L.) cv. Ellora No. 11

The experiment was conducted during Rabi season November – March, 2022-2023 at the Vegetable Research Farm, Department of Horticulture, Naini Agricultural Institute, Sam Higginbottom University of Agriculture, Technology &amp; Sciences, and Prayagraj (UP). The experiment was laid out in Randomized Block Design with 10 treatments and 3 replication to study the “Effect of GA3 and Cytokinin on growth, quality and yield of French bean (Phaseolus vulgaris L.) cv. Ellora No 11.” The treatments which areT0: Control, T1:GA3@200ppm, T2: GA3@400ppm, T3:GA3@600ppm, T4:GA3@800ppm, T5:GA3@1000ppm, T6Cytokinin@250ppm, T7Cytokinin@500ppm, T8Cytokinin@750ppm, T9Cytokinin@1000ppm. The growth regulators were sprayed at 10 D.A.S in French bean. from the above experiment finding it is conclude that all the character viz., growth parameter, earliness parameter yield parameter, qualitative parameters varied significantly. Further, The result showed that the minimum days to first flowering(42.33DAS), first picking (63.33DAS) and days to 50% flowering(53.67 DAS) while the maximum plant height(52.07cm), no. of branches(13.57), no. of leaves(214.93), number of pod per plant(21.67),pod length(16.50), pod girth(2.63cm) 1 pod weight(5.70g), yield per ha(12.35t/ha), total soluble solids (6.37°BRIX), protein (1.52%), fiber (3.89%), ascorbic acid (11.77mg)and BC ratio (3.1) was found maximum in T1:GA3@200ppm

An improved method for determining the water number for surfactants

Surfactants have a significant role in everyday life and various industries. Their amphipathic nature significantly influences their properties, functions, and applicability. The ratio of water and oil solubility is characterized by the HLB value (hydrophilic-lipophilic balance) or the closely related water number.A determination of the water number of surfactants represents the amount of water that a surfactant can incorporate into a microemulsion. The results of measuring the water number provide information about the hydrophilic properties of the surfactant in question. Understanding the water number helps determine the applicability of surfactants. From the water number of surfactants, conclusions can be drawn about the HLB value of the particular surfactant, providing further insights into its properties. Although a well-established method for determining water number has long been available, it has been revealed that many of the auxiliary substances and chemicals used in this process have severe health-damaging effects, leading to their discontinuation in routine laboratory use.Our goal was to find a solvent combination that would be suitable for the water number determination method. Additionally, we aimed to investigate solvents that are environmentally and human-biologically less harmful, easily and affordably obtainable.•The study presents a method for determining the water number of surfactants.•The method is straightforward to execute and free from harmful solvents.•By improving the method, we enhanced the reliability of the examination.

Relative prevalence of top-down versus bottom-up control in planktonic ecosystem under eutrophication and climate change: A comparative study of typical bay and estuary

Eutrophication and climate change may affect the top-down versus bottom-up controls in aquatic ecosystems. However, the relative prevalence of the two controls in planktonic ecosystems along the eutrophication and climate gradients has rarely been addressed. Here, using the field surveys of 17 years in a typical bay and estuary, we test two opposite patterns of trophic control dominance and their response to regional temporal eutrophication and climate fluctuations. It was found that trophic control of planktonic ecosystems fluctuated between the dominance of top-down and bottom-up controls on time scales in both the bay and estuary studied. The relative prevalence of these two controls in both ecosystems was significantly driven directly by regional dissolved inorganic nitrogen but, for the estuary, also by the nonlinear effects of regional sea surface temperature. In terms of indirect pathways, community relationships (synchrony and grazing pressure) in the bay are driven by both regional dissolved inorganic nitrogen - soluble reactive phosphorus ratio and sea surface temperature, but this drive did not continue to be transmitted to the trophic control. Conversely, trophic control in estuary was directly related to grazing pressure and indirectly related to synchrony. These findings support the view that eutrophication and climate drive the relative prevalence of top-down versus bottom-up controls at ecosystem and temporal scales in planktonic ecosystems, which has important implications for predicting the potential impacts of anthropogenic and environmental perturbations on the structure and function of marine ecosystems.

Importance of Considering Fed-State Gastrointestinal Physiology in Predicting the Reabsorption of Enterohepatic Circulation of Drugs

PurposeThe purpose of this study was to develop a simulation model for the pharmacokinetics (PK) of drugs undergoing enterohepatic circulation (EHC) with consideration to the environment in the gastrointestinal tract in the fed state in humans. The investigation particularly focused on the necessity of compensating for the permeability rate constant in the reabsorption process in consideration of drug entrapment in bile micelles.MethodsMeloxicam and ezetimibe were used as model drugs. The extent of the entrapment of drugs inside bile micelles was evaluated using the solubility ratio of Fed State Simulated Intestinal Fluid version 2 (FeSSIF-V2) to Fasted State Simulated Intestinal Fluid version 2 (FaSSIF-V2). Prediction accuracy was evaluated using the Mean Absolute Percentage Error (MAPE) value, calculated from the observed and predicted oral PK profiles.ResultsThe solubilization of ezetimibe by bile micelles was clearly observed while that of meloxicam was not. Assuming that only drugs in the free fraction of micelles permeate through the intestinal membrane, PK simulation for ezetimibe was performed in both scenarios with and without compensation by the permeation rate constant. The MAPE value of Zetia® tablet, containing ezetimibe, was lower with compensation than without compensation. By contrast, Mobic® tablet, containing meloxicam, showed a relatively low MAPE value even without compensation.ConclusionFor drugs which undergo EHC and can be solubilized by bile micelles, compensating for the permeation rate constant in the reabsorption process based on the free fraction ratio appears an important factor in increasing the accuracy of PK profile prediction.

Experimental support for a sustainable treatment strategy of acrylic fiber dyeing wastewater

AbstractThe study intended to devise a sustainable treatment scheme for acrylic fiber dyeing process effluents, which significantly differ from other textile plant wastewaters. The necessary experimental support was generated from a set of tests conducted on the wastewater of a plant operation, focused solely on acrylic fiber dyeing. Related experiments involved effluent characterization, biological treatability, and chemical settling/oxidation performed on raw and bio‐treated effluent, as pre‐treatment and/or polishing steps. A total COD level of 910 mg/L with a 70% soluble ratio, low total N and P contents below 10 mg/L, a detergent content of 50 mg/L and a dark/black color of 1150 Pt‐Co unit defined the average properties of the raw plant effluent. Experimental support indicated that activated sludge operation at a sludge age level above 25 d, remained insufficient as it could only provide an effluent with a soluble COD level above 150 mg/L, a biomass escape in the range of 40 to 100 mg/L and with an intense dark color. A similar experimental template, including chemical settling, chemical oxidation by NaOCl and combination of the two processes, was tested as pre‐treatment and a polishing step after biological treatment. Pre‐treatment, although with some benefit to remove toxic and inhibitory compounds, proved to be highly costly, due to excessive chemical usage and sludge generation for a sustainable, cost‐effective approach. The sequence of chemical oxidation and settling steps implemented as a polishing stage was quite effective as it secured complete color removal, a major source of concern for the selected wastewater and also, it reduced COD down to 60 mg/L, a level significantly below the residual COD threshold for biological treatment. This approach, although case‐specific for this study, provided a scientific and general perspective for similar work.

Transformation and environmental chemical characteristics of hazardous trace elements in an 800 t/d waste incineration thermal power plant

The hazardous trace elements (HTEs) emitted during the municipal solid waste incineration (MSWI) process have been widely concerned. In this work, the bottom ash (BA), heat recovery boiler ash (HA), and ash after desulfurization (SA) were collected to explore the occurrence forms of HTEs in the three types of ash and their relationship with minerals and leaching characteristics. The results show that the volatility of the seven studied HTEs follows the order of Cd, As > Ni, Zn > Pb > Cr, Cu. In the process of BA → HA → SA, the content of Cd, As, Zn, and Pb shows an increasing trend. The seven HTEs are mainly in the forms of chlorides and oxides. There is an obvious relationship between the occurrence forms and simulated existence form of HTEs. SiO2 and CaCO3 are the major mineral components in the three ashes, while SA also contains chlorine-containing compounds which are easily leached out. The risk assessment code and soluble ratio show that HTEs in SA are more leachable than BA and HA, where Cd, Pb and Ni need to be addressed to reduce their impact on soil or water during subsequent landfill treatment of SA.

High-energy ultrasound improves culture activity, polyunsaturated fatty acids and in-vitro protein digestibility in probiotic yogurt

The effect of ultrasound (US) on viable, bacteria counts, free fatty acid and amino acid content and in vitro protein digestibility of set-type probiotic yogurts produced with fortification of milk proteins (caseinate and whey protein concentrate) or skimmed milk powder (SMP) was investigated. US application increased the protein content of probiotic yogurts and enhanced the growth of yogurt bacteria, Streptococcus thermophilus and Lactobacillus delbrueckii subsp. bulgaricus, and the probiotic bacterium, Bifidobacterium animalis subsp. lactis (BB-12), in yogurt samples. All US-treated groups had higher probiotic counts between 8.44 and 8.61 log cfu/g than their counterpart controls at the end of storage. One- or two- stage US application reduced the saturated fatty acids (SFA) ratio by up to 19% and increased the polyunsaturated fatty acids (PUFA) ratio of probiotic yogurts by up to 40%. At the beginning and end of storage, one-stage US applied Y2 and YP2 groups had the highest PUFA ratio as 36.86, 33.25 and 25.10, 20.03%, respectively, but it did not affect the monounsaturated fatty acids (MUFA) ratio. It also positively affected the in vitro protein digestibility, and total amino acid amounts of probiotic yogurts in pre- and post-digestion. The soluble protein ratios of all US-treated samples were higher both at the beginning and end of storage. Industrial relevanceUltrasound is a promising approach in dairy technology. The results obtained in this study can help to improve the probiotic viability, antioxidant capacity, PUFA content, and digestibility of proteins in dairy products by US treatment and provide an opportunity for US-treated dairy products in the functional food market. Ultrasound is a so- called green technology because it is environmentally friendly, and the use of ultrasound in production will positively affect consumer preferences. In addition, obtained data may be beneficial for the industrial use of this technology.

Caracterização físico-química de frutos, biometria e dormência de sementes de marula

ABSTRACT: This study recorded the physicochemical properties of the marula fruits, the biometry and breaking the dormancy in the marula seeds. Using 200 ripe fruits, the physicochemical characterization was done. From a random sample of 400 seeds, an assessment of the biometrics was performed, and the weight, length, width and thickness of the fruits and seeds were evaluated. Two experiments were conducted to study dormancy breaking using pre-germination treatments, which included immersing the marula seeds five times (0, 15, 30, 45 and 60 minutes) in concentrated sulfuric acid (96%) and water, at 65 ºC temperature. The control was time zero, using plain distilled water, with 25 seeds per treatment and four replications. The marula fruits revealed average values of 21.65 ± 3.44 g, 35.5 ± 2.38 and 34.8 ± 2.73, respectively, for weight, diameter and length. The soluble solids (SS), Hydrogenonic Potential (pH), titratable acidity (AT) and ratio (AT/SS) were 14.74 ± 1.0º Brix, 3.93 ± 0.49 pH, 0.63 ± 0.22 and 27.07 ± 12.10, respectively. For the weight of one thousand seeds, the average value was 3.576 ± 188.4 g. The mean values for the dimensions of the width, length and diameter of the seeds were 22.9 ± 2.11; 23.7 ± 2.04; and 14.9 ± 2.09 mm, respectively. The physiological quality of these seeds was enhanced by immersing the seeds from freshly picked fruits in sulfuric acid for a maximum of 30 minutes and storing them for six months.