Solid Waste Disposal Research Articles

Mechanical and microstructural properties of one-part geopolymer-solidified soil attacked by Na2SO4

In the construction of traffic engineering, a large amount of waste soils was generated. These soils have poor engineering properties, cannot be used as subgrade fill, so they were solidified treatment, commonly used cement curing agent have adverse effects on the environment. One-part geopolymer (OPG), as a green and new type of soil stabilizer, not only provides a new idea for the solidification of engineering waste, but also offers an effective way for the disposal of industrial solid waste, and reduces the consumption of cement. In order to evaluate the durability of geopolymer solidified soil, in this paper, with fly ash (FA) and ground granulated blast furnace slag (GGBS) as raw materials, solid NaOH and Na2SiO3 as solid alkali-activator to prepare OPG, which was used as a solidifier to solidify the waste dredged silt to produce one-part geopolymer-solidified soil (OPGSS). The variation patterns of mass, unconfined compression strength (UCS) and elasticity modulus of OPGSS with attack time under 0%, 5% and 10% Na2SO4 solutions were investigated. The changes in the phase composition, micro-morphology and pore size distribution of OPGSS were characterized by XRD, SEM-EDS and nuclear magnetic resonance (NMR). The results showed that: Under both 5% and 10% Na2SO4 solutions, the UCS of OPGSS decreased in two stages with attack time, and the number of large pores and total pores of OPGSS increased in two stages. The inflection points appeared on day 8 under 5% Na2SO4 solution; the inflection points appeared on day 5 under 10% Na2SO4 solution. This was mainly due to the expansion of corrosion products formed by OPGSS under Na2SO4 attack, which destroyed the microstructure of OPGSS and led to a reduction in the UCS of the OPGSS.

Prophet time series modeling of waste disposal rates in four North American cities.

In this study, three different univariate municipal solid waste (MSW) disposal rate forecast models (SARIMA, Holt-Winters, Prophet) were examined using different testing periods in four North American cities with different socioeconomic conditions. A review of the literature suggests that the selected models are able to handle seasonality in a time series; however, their ability to handle outliers is not well understood. The Prophet model generally outperformed the Holt-Winters model and the SARIMA model. The MAPE and R2 of the Prophet model during pre-COVID-19 were 4.3-22.2% and 0.71-0.93, respectively. All three models showed satisfactory predictive results, especially during the pre-COVID-19 testing period. COVID-19 lockdowns and the associated regulatory measures appear to have affected MSW disposal behaviors, and all the univariate models failed to fully capture the abrupt changes in waste disposal behaviors. Modeling errors were largely attributed to data noise in seasonality and the unprecedented event of COVID-19 lockdowns. Overall, the modeling errors of the Prophet model were evenly distributed, with minimum modeling biases. The Prophet model also appeared to be versatile and successfully captured MSW disposal rates from 3000 to 39,000 tons/month. The study highlights the potential benefits of the use of univariate models in waste forecast.

A Review of Indigenous Knowledge Systems and Their Application in Sustainable Solid Waste Management

Indigenous communities have always used their knowledge systems to improve their quality of life. For example, rural communities’ resort to indigenous cultural practices to manage their own waste when local administration lacks coordinated ways to manage waste. In the context of indigenous knowledge systems, the idea of waste is non-existent. As indigenous knowledge is believed to provide a holistic framework for an approach that effectively promotes sustainability. As such, the current study conducted a systematic review to evaluate the extent to which indigenous solid waste management practices contribute to sustainable waste disposal methods. Using the Preferred Reporting Items for Systematic Reviews and Meta-analyses guidelines, a literature search was carried out in the field of indigenous solid waste management practices. The results indicate a significant imbalance in the amount of conclusive evidence that has been produced to date that suggests the sustainability of indigenous solid waste management practices. It is for this reason that the current study has discovered a substantial literature gap in sustainable solid waste management associated with indigenous knowledge systems. This is an unprecedented trend, especially for a knowledge system that is supposed to promote sustainability practices. However, to improve the likelihood of incorporating indigenous solid waste disposal methods into modern practices, it is imperative to understand the foundational elements that contribute to the advancement of sustainability, lest the sustainability aspect associated with this knowledge system in the discipline of solid waste management remain a mere rhetoric.

The Frequency of Porcine Cysticercosis and Factors Associated with Taenia solium Infection in the Municipality of Tuchín-Córdoba, Colombia.

Taeniasis and cysticercosis are parasitic infections that affect humans and pigs. Their global distribution constitutes a serious public health issue with significant implications for pork production. The purpose of this study was to evaluate the presence of porcine cysticercosis in backyard swine from 42 indigenous communities throughout Tuchín-Córdoba, Colombia. Between December 2020 and March 2021, free-range pigs (n = 442) were assessed using the ELISA cysticercosis Ag test; 85 pigs were examined through sublingual visual evaluation, and 4 slaughtered pig carcasses were subjected to standard operation inspection. The collected cysticercus underwent histological and PCR analysis. Furthermore, 192 surveys of knowledge, attitudes, and practices (KAP) were used to identify the factors that facilitate infection transmission. Serological investigation revealed that 9.7% (46/472) of the animals were positive for cysticerci Ag. Sublingual inspection identified cysticercus in 28.7% (25/87) of the animals, while PCR analysis indicated that cysticercus corresponded to the T. solium American/African genotype. The factors associated with T. solium infection in the pigs in the surveyed areas numbered 14. The majority are associated with factors that promote the active persistence of Taenia solium's life cycle in an area, such as lack of environmental sanitation, a lack of coverage or care for drinking water and wastewater treatment services, and no solid waste disposal.

Assessing groundwater quality dynamics in Madhya Pradesh: Chemical contaminants and their temporal patterns

Groundwater is essential for maintaining ecosystem health and overall well-being as a pivotal resource for plants and animals. The increasing public consciousness of the deterioration of groundwater quality has emphasized the significance of undertaking extended evaluations of groundwater water quality, particularly in regions undergoing substantial hydrological alterations. This study primarily aims to investigate the spatio-temporal variations in groundwater quality and evaluate its suitability for potable purposes in the region of Madhya Pradesh. The study combines the Mann-Kendall (MK) test and Sen's Slope (SS) to analyze the changes in groundwater quality of all 51 districts of Madhya Pradesh, India, utilizing 12 water quality indices using MATLAB. Data was sourced from the Central Ground Water Board (CGWB) in India from the year 2001–2021. The data was then tested for homogeneity at all 1154 sampling stations using the software XLSTAT. Piper plot clustering characterized the state's groundwater as bicarbonate-calcium-magnesium (HCO3−-Ca2+-Mg2+) type. The study found that the groundwater in the area is heavily impacted by high levels of nitrate and hardness, which is caused by an increase in multivalent cations. The water was classified as ranging from hard to extremely hard, and approximately 25.49% of the state's groundwater has nitrate levels that exceed the acceptable limits. The MK test showed a significant increasing correlation in trends for parameters such as nitrate, sulfate, fluoride, chloride, bicarbonate, total hardness, and electrical conductivity. It also showed a significant decreasing correlation for calcium, magnesium, potassium, and sodium. These results were observed at a confidence level of 95%. The analysis of trends has shown that human-related factors have a considerable effect on the characteristics of groundwater quality. It is therefore recommended that such human-related factors be taken into consideration when developing policies for managing groundwater resources. Consequently, these policies should emphasize the strict enforcement of rules and standards that limit the overuse of fertilizers, ensure the appropriate disposal of municipal solid and liquid wastes, and regulate industrial pollutants.

Analysis of the micro-drainage infrastructure on an avenue in the city of Aracaju-SE

The urban drainage system plays a vital role in the lives of people living in urban areas, protecting properties and citizens during heavy rainfall, preventing erosion on streets and public roads, and other benefits. To create an efficient drainage system, attention must be paid to the design, execution, and supervision of works by qualified professionals, as well as the maintenance of existing works. Because of the above, this article aims to analyze the micro-drainage infrastructure of Avenida Edélzio Vieira de Melo, in the city of Aracaju-SE. Initially, an in loco visit was made to assess the state of conservation and the presence of waste in the gutters and gutter inlet. It was observed that 51.2% of the gutter inlets are located in an undesirable way; 60.5% are partially or totally degraded and 81.4% have solid waste disposal. About the manholes, 90% are inadequately located, 80% are partially or totally degraded, and, finally, 70% are level with the sidewalk. The conclusion is that the devices need to be cleaned more frequently, and the population needs to be made more aware not to throw garbage in the street, since the presence of solid waste negatively affects the functioning of the drainage network. Finally, the location of the devices (manholes and gutter inlets) affects their efficiency, and durability and interferes with the comfort of those who use the road.

Factors affecting household solid waste source separation intention and disposal: a focus on Sri Lanka

Factors affecting household solid waste source separation intention and disposal: a focus on Sri Lanka

Mechanism study of the effect of superplasticizers in alkali-activated materials containing sludge

To realize the safe disposal of solid waste containing heavy metals, sewage sludge jointly with slag and metakaolin was used to prepare alkali-activated materials (AAMs), and the effect mechanism of polycarboxylate acid superplasticizer (PCE), naphthalene superplasticizer (NS) and aliphatic superplasticizer (AS) in AAMs were studied. The results showed that both the fluidity and strength of AAMs decreased with the addition of sludge. For the NaOH + Na2SiO3 activated mortar specimen, the incorporation of sludge can reduce their fluidity and strength from 206 mm and 80.25 MPa to 193 mm and 42.43 MPa, respectively. However, the addition of superplasticizers into sludge-containing AAMs leads to a reduction of 3–9% of the fluidity. Interestingly, it can enhance the strength of the AAMs, especially the NS and AS, which increase the strength by approximately 25%. This is attributed to the increase of particle dispersion by superplasticizers. However, the free water released in the process is reabsorbed by the sludge, which increases the local alkali concentration and promotes the activation of the activity. The dispersed sludge particles can play the role of physical filling, making the structure denser. HIGHLIGHTS Sludge is adverse effects on both the fluidity and strength of alkali-activated materials (AAMs). The addition of superplasticizers (SPs) increases the strength of AAM with sludge. SPs do not affect improving the fluidity of AAMs with sludge, even slightly bad. The dispersion effect of SPs on the sludge is beneficial to promote its activity in AAMs.

Filtration System for Solid Surface Waste in Coastal Waters Based on Biomimicry and Circular Economy

One of the biggest environmental problems in the world is the inadequate disposal of solid waste in the oceans. Therefore, this article aims to demonstrate the importance of biomimicry and the circular economy in the development of a boat with peculiar characteristics of the filtration system existing in the mouth of the Whale Shark, which is capable of filtering surface solid waste in coastal waters, submerged at a depth up to two meters. Therefore, the basis for the research focused on studies published in books, articles, dissertations, websites, magazines relevant to the topic, taking into account the methodological process of product design. Finally, the importance of Biomimicry, Circular Economy and Design as strategic tools to find innovative solutions in order to mitigate environmental problems was verified.

The one-step synthesis of Fe-N co-doped peony pod-based porous carbon for the removal of tetracycline

The peony pod is a component of the cash crop oil peony (Paeonia suffruticosa Andr.), it accounts for more than half of the quality of the peony seed. However, indiscriminate disposal leads to resource waste. In addition, the pollution caused by the overuse of antibiotics and the evolution of resistance have been a conundrum. There is an urgent need to find a pollutant removal method that conforms to the current concept of sustainable development. In this study, the biomass porous carbon (PCN,Fe-0.5) was prepared and modified by one-step synthesis method using the by-product peony pod as carbon precursor, urea as nitrogen source, and steel slag as magnetic material. The utilization of biomass waste solved resources waste caused by the unreasonable disposal of agricultural solid waste. The doped materials were cheap and easy to obtain, and they improved the structure and function of porous carbon. The maximum adsorption capacity of PCN,Fe-0.5 reached 726.4 mg·g−1 with 100 mg·L−1 of tetracycline (TC). The adsorption mechanism was summarized as pore filling, van der Waals force, π-π EDA, surface complexation, hydrogen bonding and chemisorption. A low-budget tetracycline (TC) removal method was explored through the investigation on the adsorption performance and recovery capability of PCN,Fe-0.5, which was also conducive to realizing the recycling of biomass waste and industrial waste.

Persistent organic pollutants: Impacts and control measures

Persistent organic pollutants (POPs) represent a significant environmental problem due to their toxicity, with a high capacity to persist in the environment, resistance to conventional degradation methods, the ability to accumulate in living organisms and their magnification in food chains or food. In this review article, the impacts on health and environmental components are examined. Strategies and measures for control, mitigation and/or minimization of POPs are also addressed. Agricultural and industrial activities, inadequate final disposal of solid waste and lack of wastewater treatment are identified as the main sources of POP emissions. In addition, innovative and promising technologies are analyzed, such as nanotechnology, bioremediation, rhizoremediation, biochar, chromatography techniques, ultrasound, among others, for the adequate treatment of POPs. The review highlights both the advantages and limitations of these technologies, pointing out areas that still require developments to achieve effective treatments. More economical and ecological alternatives are also mentioned to counteract the impacts of POPs.

Review on Investigating Soil Stabilized Mud Blocks with Combined C&D Waste

Buildings built by ancient civilizations like the Mesopotamians and Egyptians were made of clay and other materials, and the use of stabilized soil for construction dates to those times. On the other hand, the scientific underpinnings of soil stabilization were not established until the early 1900s. In comparison to conventional building materials, the use of stabilized soil-based construction materials, such as soil stabilized mud blocks, can offer several advantages, such as improved strength and durability, less of an adverse effect on the environment, and lower costs. The world is facing an issue that calls for the disposal of inorganic solid waste to be addressed right away. This solid waste that is produced when old buildings are demolished is frequently classified as industrial waste or C&D waste. In India alone, enormous amounts of waste are produced, very little of which is recycled. When modifying the properties of stabilized soil, this C&D waste can be used in place of soil or quarry sand. This work explores the use of a stabilizing agent in conjunction with combined C&D waste for soil sampling. The studies use combined C&D waste and soil stabilized mud blocks to test the hollow blocks' water absorption capacity and strength for various replacements. The materials needed for the study came from nearby structures that had been demolished. Using mortar, cylindrical samples for 32 different ratios of mixed construction and demolition waste with a 9% cement content were cast for various compositions. To determine whether the stabilized samples were suitable for use in construction, tests were conducted on their compressive strength and water absorption properties. Based on the least compressive values found in cylindrical samples, the C&D waste was used in ratios ranging from 0% to 100% in place of soil. Mud blocks stabilized by soil were poured and examined for durability, strength, and mechanical qualities. In this study, an effort was made to use C&D waste—that is, brick and concrete waste—in varying amounts to create cylindrical samples that could be used to create concrete and stabilized mud blocks. In order to create cylindrical samples, different ratios of brick waste, concrete waste, and brick-concrete waste were used for 23 mix proportions. Cylindrical samples were manufactured using a cement content of 9 and 12%. These samples' mechanical and physical characteristics, such as their compressive strength, water absorption capacity, and initial rate of absorption, were investigated.

Numerical study of particle behaviours and heat transfer in a complex rotary kiln

Rotary kiln is widely used for thermal disposal of solid waste due to its effectiveness and high efficiency in recent years. To further improve the processing efficiency, a newly designed rotary kiln with three-section structure is proposed, and the behaviours of particle motion and heat transfer are investigated. Firstly, a lab-scale rotary kiln is manufactured, and experiments are carried out. Verified by experimental data, a CFD-DEM numerical model is developed to analyze the particle motion and heat transfer characteristics with the effects of inlet flue gas temperature, feeding rate and rotating speed. The results show that the outlet temperature increases linearly with the flue gas temperature, while it is negatively correlated with the feeding rate and rotating speed. In addition, the volumetric heat transfer coefficient in this complex rotary kiln is analyzed, the overall heat transfer coefficient is between 200 and 700 W/(m3 K).

Investigation of Heavy Metal Concentrations and Accumulation Capacities of Naturally Growing Species in Old Garbage Area

In underdeveloped and/or developing countries, garbage is often randomly piled up in open areas. This method has been used to dispose of garbage/solid waste in Turkey for many years. Although pollution is not at the forefront in Bingöl province, the area located in the city center of the city has been used as a wild garbage storage area for approximately 18 years. Since the garbage in the area poses a danger to people and the environment, this area has become inactive with the establishment of a new solid waste disposal facility in the city. There are plants that have adapted to this area, which has been empty for about ten years. In this study, it was tried to determine in what proportions and organs the plant species distributed in the area accumulate heavy metals that may have come from garbage leachate. Plants identified in the field; Alyssum simplex, Cirsium libanoticum, Descurainia sophia, Fumaria asepala, Fumaria officinalis, Matricaria chamomilla, Papaver dubium, Scrophularia canina, Trifolium repens and Ziziphora capitata species. Fe, Cr, As, Cd and Pb concentrations (mg kg-1) of these species were measured in root, stem, leaf and flower organs and translocation factors (TF) were calculated for these species. In conclusion; Alyssum simplex, Cirsium libanoticum and Fumaria asepala for Fe, Cirsium libanoticum, Fumaria asepala, Fumaria officinalis and Matricaria chamomilla Cr and As, Cirsium libanoticum, Papaver dubium and Scrophularia canina for Cd and all other species except Alyssum simplex and Scrophularia canina for Pb translocation factors (TF) were found to be greater than 1 (TF>1). The accumulation potential of these species is thought to be promising so that they can be evaluated in phytoremediation.

Disposal of solid waste as building materials: A study on the mechanical and durability performance of concrete composed of gold tailings

The purpose of this study is to explore the possibility of gold tailings as an alternative to natural river sand for preparing concrete, to solve the problems of rapid increase in gold tailings and insufficient natural river sand stock. Additionally, gold tailings upgraded by centrifugal separation are compared with untreated gold tailings. The performances and modification mechanisms of gold tailings on the mechanical strength and durability performance of concrete were investigated. The results demonstrate that concrete composed of gold tailings exhibits commendable mechanical and durability properties, with the optimal replacement level of natural river sand being 30%. Replacing river sand with gold tailings enhances the compressive and split tensile strengths of concrete, reduces water absorption, and improves its resistance to freeze-thaw cycles and chloride ion permeability, primarily owing to the pozzolanic activity and filling effect of the gold tailings. The upgrading of gold tailings not only changed altered the particle size but also changed the active SiO2 and Al2O3 content, thus, further enhancing the mechanical and durability of concrete. The study establishes that utilizing gold tailings in construction can serve as a viable substitute for river sand, thereby mitigating potential environmental repercussions associated with gold tailings. The findings hold promise for diminishing the reliance on river sand, thereby markedly enhancing resource sustainability.

Biogas upgrading and membrane anti-fouling mechanisms in electrochemical anaerobic membrane bioreactor (EC-AnMBR): Focusing on spatio-temporal distribution of metabolic functionality of microorganisms

Electrochemical anaerobic membrane bioreactor (EC-AnMBR) by integrating a composite anodic membrane (CAM), represents an effective method for promoting methanogenic performance and mitigating membrane fouling. However, the development and formation of electroactive biofilm on CAM, and the spatio-temporal distribution of key functional microorganisms, especially the degradation mechanism of organic pollutants in metabolic pathways were not well documented. In this work, two AnMBR systems (EC-AnMBR and traditional AnMBR) were constructed and operated to identify the role of CAM in metabolic pathway on biogas upgrading and mitigation of membrane fouling. The methane yield of EC-AnMBR at HRT of 20 days was 217.1 ± 25.6 mL-CH4/g COD, about 32.1 % higher compared to the traditional AnMBR. The 16S rRNA analysis revealed that the EC-AnMBR significantly promoted the growth of hydrolysis bacteria (Lactobacillus and SJA-15) and methanogenic archaea (Methanosaeta and Methanobacterium). Metagenomic analysis revealed that the EC-AnMBR promotes the upregulation of functional genes involved in carbohydrate metabolism (gap and kor) and methane metabolism (mtr, mcr, and hdr), improving the degradation of soluble microbial products (SMPs)/extracellular polymeric substances (EPS) on the CAM and enhancing the methanogens activity on the cathode. Moreover, CAM biofilm exhibits heterogeneity in the degradation of organic pollutants along its vertical depth. The bacteria with high hydrolyzing ability accumulated in the upper part, driving the feedstock degradation for higher starch, sucrose and galactose metabolism. A three-dimensional mesh-like cake structure with larger pores was formed as a biofilter in the middle and lower part of CAM, where the electroactive Geobacter sulfurreducens had high capabilities to directly store and transfer electrons for the degradation of organic pollutants. This outcome will further contribute to the comprehension of the metabolic mechanisms of CAM module on membrane fouling control and organic solid waste treatment and disposal.

Quantitative and Qualitative Assessment of Hospital Waste Management at Capital’s Health Care Facility, Pakistan

The improper disposal of solid waste, particularly in developing countries, poses significant threats to the natural environment and public health, leading to increased pollution and disease prevalence. Hospital-generated solid waste, characterized by its heightened toxicity and contagion potential, further exacerbates these risks when mismanaged. This study undertakes an evaluation of the solid waste management (SWM) practices implemented at Pakistan Institute of Medical Sciences (PIMS) Hospital in Islamabad, with a specific focus on assessing their impact on the staff responsible for SWM. The data collection process encompasses on-site visits to check and compare the hospital wastes data available athospital servers as well as by the structured questionnaires. According to the gathered data, PIMS Hospital generates an annual total of 61,030 kilograms of hazardous waste and 254,866.9 kilograms of non-hazardous waste. Given its status as the capital's healthcare facility, PIMS Hospital maintains a well-established and satisfactorily functioning standard of SWM system. This system includes the segregation of hazardous and non-hazardous waste at the point of generation, facilitated by a color-coded scheme. Non-hazardous waste is then transported to a secure covered storage site using specialized trolleys, while hazardous waste is safely disposed of through the utilization of on-site, double-chambered incinerators. Data analysis underscores the heightened occupational risks faced by SWM personnel, including an increased likelihood of sharp injuries, and disease exposure, as well as the prevalent experience of stress and anxiety. The study's findings necessitate the imperative adoption of standardized practices for the proper handling, treatment, and disposal of solid waste by the involved staff. Furthermore, a critical recommendation arises from the need for routine health monitoring of SWM workers by qualified medical professionals through established mechanisms to mitigate the potential transmission of diseases to their family members. Such measures are paramount in safeguarding the health and well-being of both the SWM staff and the broader community.

Commercial compost amendments inhibit the bioavailability and plant uptake of per- and polyfluoroalkyl substances in soil-porewater-lettuce systems

Compost is widely used in agriculture as fertilizer while providing a practical option for solid municipal waste disposal. However, compost may also contain per- and polyfluoroalkyl substances (PFAS), potentially impacting soils and leading to PFAS entry into food chains and ultimately human exposure risks via dietary intake. This study examined how compost affects the bioavailability and uptake of eight PFAS (two ethers, three fluorotelomer sulfonates, and three perfluorosulfonates) by lettuce (Lactuca sativa) grown in commercial organic compost-amended, PFAS spiked soils. After 50 days of greenhouse experiment, PFAS uptake by lettuce decreased (by up to 90.5 %) with the increasing compost amendment ratios (0–20 %, w/w), consistent with their decreased porewater concentrations (by 30.7–86.3 %) in compost-amended soils. Decreased bioavailability of PFAS was evidenced by the increased in-situ soil-porewater distribution coefficients (Kd) (by factors of 1.5–7.0) with increasing compost additions. Significant negative (or positive) correlations (R2 ≥ 0.55) were observed between plant bioaccumulation (or Kd) and soil organic carbon content, suggesting that compost amendment inhibited plant uptake of PFAS mainly by increasing soil organic carbon and enhancing PFAS sorption. However, short-chain PFAS alternatives (e.g., perfluoro-2-methoxyacetic acid (PFMOAA)) were effectively translocated to shoots with translocation factors > 2.9, increasing their risks of contamination in leafy vegetables. Our findings underscore the necessity for comprehensive risk assessment of compost-borne PFAS when using commercial compost products in agricultural lands.

Clean City, Green Future: The Path Towards Sustainability Throught Education

Objective: Solid waste management is a topic of growing concern globally due to the environmental, economic and social impacts. In this regard, the objective was to teach the management of household solid waste to a pilot group of families through the application of an environmental educational program, to ensure the sustainability of a clean city with a green future.   Method: Conferences were held with experts in the field, which provided essential information for the formulation of problem, objective, and activity trees. For the application of the program, three key dimensions were considered: knowledge of solid waste and its impact on the environment, the attitude of the population towards the disposal of household solid waste, and citizen awareness regarding the environment. The collection of relevant data was carried out through specific surveys and was validated through the use of the Cronbach's Alpha reliability index. The study sample consisted of 278 participants, with an average of five people per family. The distribution of the surveys was carried out at six randomly selected locations.    Results: 84 % recognize the importance of education on solid waste management, 92 % show a positive attitude towards waste disposal, and 96 % are committed to sharing knowledge. Furthermore, 88 % value the contribution of recyclers to the recycling chain.   Conclusions: The challenge lies in expanding the pilot program to involve a variety of institutions and businesses, ensuring long-term sustainability and strengthening the role of the municipality in waste recycling and disposal management.

Unveiling the Air Quality Impacts of Municipal Solid Waste Disposal: An Integrative Study of On-Site Measurements and Community Perceptions

This study examines air quality conditions in and around a classroom located in the Sarıçam/Adana region of Türkiye, near the campus of Adana Alparslan Türkeş Science and Technology University and the Sofulu municipal solid waste (MSW) facility. This academic setting was strategically chosen due to its proximity to the waste facility. The study aims to provide a comprehensive view of the environmental and social impacts of solid waste management through a methodological approach that combines quantitative on-site measurements and qualitative survey studies. Findings from measurements and surveys underline the significant and measurable impacts of MSW facilities on the ambient air quality of university residents. The analysis revealed a marked increase in concentrations of key pollutants, including carbon monoxide (CO), hydrogen sulfide (H2S), dust, and methane (CH4). At sampling point N1, H2S levels rose from 0 ppm in July to 13 ppm in November. Methane increased from 0.2% to 2.5% of the Lower Explosive Limit (LEL) at the same point, although it remained within safety limits. Additionally, CO levels showed a 40% increase, and dust concentration levels rose from 0.21 mg/m3 to 2.36 mg/m3 from summer to winter, indicating a seasonal variation likely influenced by the landfill’s operational dynamics, as well as changes in temperature and relative humidity. In particular, the results indicate high concentrations of CO, H2S and dust, which are directly related to air quality degradation. The study also sheds light on the impacts of these waste disposal facilities on the general well-being and health of the university community, particularly on students and staff. In addition to these findings, the study highlights a general lack of awareness in the university community about the impacts of MSW facilities on air quality. This highlights the need for increased education and information dissemination. The results support the development of comprehensive and effective strategies, including technical solutions and public awareness initiatives, to mitigate the impacts of these facilities on residential areas. In conclusion, the impacts of MSW facilities on air quality should be seen as a multidimensional issue that requires a holistic approach addressing environmental, health, social, and educational dimensions.