Solid Surface Research Articles

Modeling of Chemical Vapor Infiltration for Fiber-Reinforced Silicon Carbide Composites Using Meshless Method of Fundamental Solutions

In this study, the Method of Fundamental Solutions (MFSs) is adopted to model Chemical Vapor Infiltration (CVI) in a fibrous preform. The preparation of dense fiber-reinforced silicon carbide composites is considered. The reaction flux at the solid surface is equal to the diffusion flux towards the surface. The Robin or third-type boundary condition is implemented into the MFS. From the fibers’ surface concentrations obtained by MFS, deposition rates are calculated, and the geometry is updated at each time step, modeling the pore filling over time. The MFS solution is verified by comparing the results to a known analytical solution for a simplified geometry of concentric cylinders with a concentration set at the outer cylinder and a reaction at the inner cylinder. MFS solutions are compared to published experimental data. Porosity transients are obtained by a combination of MFSs with surface deposition to show the relation between the initial and final porosities.

Sub-PPB Detection with Gas-Phase Multiphoton Electron Extraction Spectroscopy under Ambient Conditions.

Multiphoton electron extraction spectroscopy (MEES) is an advanced analytical technique that has demonstrated exceptional sensitivity and specificity for detecting molecular traces on solid and liquid surfaces. Building upon the solid-state MEES foundations, this study introduces the first application of MEES in the gas phase (gas-phase MEES), specifically designed for quantitative detection of gas traces at sub-part per billion (sub-PPB) concentrations under ambient atmospheric conditions. Our experimental setup utilizes resonant multiphoton ionization processes using ns laser pulses under a high electrical field. The generated photoelectron charges are recorded as a function of the laser's wavelength. This research showcases the high sensitivity of gas-phase MEES, achieving high spectral resolution with resonant peak widths less than 0.02 nm FWHM. We present results from quantitative analysis of benzene and aniline, two industrially and environmentally significant compounds, demonstrating linear responses in the sub-PPM and sub-PPB ranges. The enhanced sensitivity and resolution of gas-phase MEES offer a powerful approach to trace gas analysis, with potential applications in environmental monitoring, industrial safety, security screening, and medical diagnostics. This study confirms the advantages of gas-phase MEES over many traditional optical spectroscopic methods and demonstrates its potential in direct gas-trace sensing in ambient atmosphere.

Impact of drops of a nanoparticle dispersion in a viscoelastic liquid

The evaluation of nanoparticle dispersion within viscoelastic fluids upon impact on hydrophobic and hydrophilic surfaces is conducted using the Euler-Lagrangian technique. The volume-of-fluid approach is employed in conjunction with the Lagrangian method to model the transport of nanoparticles in a three-phase system (particles-air-viscoelastic fluid). The assessment of nanoparticle dispersion was conducted over a range of Péclet numbers and contact angles (θ=30° and 120°) in three-dimensional (3D) space using the mean square displacement method. The findings suggest that the dispersion of nanoparticles is mainly influenced by normal stress. During droplet impact, nanoparticles exhibit non-Fickian superdiffusive behaviour due to the viscoelastic fluid’s non-Gaussian distribution of velocity and stresses (normal and shear) fields. The wettability of the fluid with solid surfaces substantially affected the dispersion of nanoparticles in the viscoelastic fluid.

Promastigote EPS secretion and haptomonad biofilm formation as evolutionary adaptations of trypanosomatid parasites for colonizing honeybee hosts

Bees are major pollinators involved in the maintenance of all terrestrial ecosystems. Biotic and abiotic factors placing these insects at risk is a research priority for ecological and agricultural sustainability. Parasites are one of the key players of this global decline and the study of their mechanisms of action is essential to control honeybee colony losses. Trypanosomatid parasites and particularly the Lotmaria passim are widely spread in honeybees, however their lifestyle is poorly understood. In this work, we show how these parasites are able to differentiate into a new parasitic lifestyle: the trypanosomatid biofilms. Using different microscopic techniques, we demonstrated that the secretion of Extracellular Polymeric Substances by free-swimming unicellular promastigote forms is a prerequisite for the generation and adherence of multicellular biofilms to solid surfaces in vitro and in vivo. Moreover, compared to human-infective trypanosomatid parasites our study shows how trypanosomatid parasites of honeybees increases their resistance and thus resilience to drastic changes in environmental conditions such as ultralow temperatures and hypoosmotic shock, which would explain their success thriving within or outside their hosts. These results set up the basis for the understanding of the success of this group of parasites in nature and to unveil the impact of such pathogens in honeybees, a keystones species in most terrestrial ecosystems.

A hybrid Gaussian mixture/DSMC approach to study the Fourier thermal problem

In rarefied gas dynamics scattering kernels deserve special attention since they contain all the essential information about the effects of physical and chemical properties of the gas–solid surface interface on the gas scattering process. However, to study the impact of the gas–surface interactions on the large-scale behavior of fluid flows, these scattering kernels need to be integrated in larger-scale models like Direct Simulation Monte Carlo (DSMC). In this work, the Gaussian mixture (GM) model, an unsupervised machine learning approach, is utilized to establish a scattering kernel for monoatomic (Ar) and diatomic (H2\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$\\hbox {H}_{2}$$\\end{document}) gases directly from Molecular Dynamics (MD) simulations data. The GM scattering kernel is coupled to a pure DSMC solver to study isothermal and non-isothermal rarefied gas flows in a system with two parallel walls. To fully examine the coupling mechanism between the GM scattering kernel and the DSMC approach, a one-to-one correspondence between MD and DSMC particles is considered here. Benchmarked by MD results, the performance of the GM-DSMC is assessed against the Cercignani–Lampis–Lord (CLL) kernel incorporated into DSMC simulation (CLL-DSMC). The comparison of various physical and stochastic parameters shows the better performance of the GM-DSMC approach. Especially for the diatomic system, the GM-DSMC outperforms the CLL-DSMC approach. The fundamental superiority of the GM-DSMC approach confirms its potential as a multi-scale simulation approach for accurately measuring flow field properties in systems with highly nonequilibrium conditions.

Multifunctional integrated pattern for enhancing fog harvesting water unidirectional transport in a heterogeneous pattern

Solid surfaces with improved wettability as well as geometric structures can enhance capture and droplet removal, thereby improving fog harvesting. We fabricated Al wires by combining superhydrophilic (SHL), superhydrophobic (SHB), and oil-infused SHB (SHBO) surfaces into a pattern whose fog-harvesting efficiency could be measured. The SHL-SHBO-SHL pattern showed the highest promise of water droplet capture and mobility on a solid surface with 42% efficiency compared to the 34% efficiency of Bare. In order to identify the optimal efficiency features, two boundary conditions (boundary I: from SHL to SHBO and boundary II: from SHBO to SHL) were introduced, and the impact of the hydrophilic area was examined. Boundary I boosts capture efficiency whereas boundary II increases drain efficiency. Understanding the forces operating at the wettability gradient surface, as well as incorporating the area ratio of SHL and SHBO via wettability combinations, are key to designing effective fog harvesting systems.

Particle removal from solid surfaces via an impinging gas jet pulse: Comparison between experimental and CFD-DEM modeling results

Computational and experimental studies are performed to investigate the influence of a gas jet pulse impinging perpendicularly onto a flat solid surface seeded with a monolayer of spherical particles. A numerical resuspension model is derived to predict particle release into the gas phase during jet impingement. To this end, discrete particles are immersed in a continuous gas phase modeled via Large Eddy Simulation to capture the effect of jet turbulence on the particle detachment process. Two-way coupling between particulate and gas phase is established via a near-wall particle drag model and a lift model. Direct particle–wall interactions are captured with adhesion, rolling friction and sliding friction models. To validate the overall modeling approach, numerical results are compared with resuspension experiments for monodisperse polystyrene particles placed on a glass slide. Simulations show that the particles preferentially mobilize by rolling, followed to a limited extend by lift off from the solid surface driven by aerodynamic forces and particle–particle collisions. Resuspension occurs in the first instants after jet impingement. Computational and experimental results for removal efficiency Γ are in good agreement in terms of the location of their r50 parameter, i.e., the radial position where 50% of the particles have been removed by the jet; both results show a linear dependence between the r50 value and the jet Reynolds number of the impinging jet. However, experimental Γ(r) curves generally have a smooth sigmoidal shape whereas numerical results predict a sharp transition. Some model shortcomings are identified which lead to an underprediction of particle lift-off and which explain the observed differences. Furthermore, the experimental Γ curves nearly collapse onto each other when plotted over the predicted local wall-shear stress.

Citric acid-induced photochemical behavior of Cr(III)-substituted ferrihydrite: Fe and Cr release, mineral transformation and reactive oxygen species generation

Cr(III)-substituted ferrihydrite (Fh-Cr(III)) is widespread in the surrounding environment of mining areas. Fh-Cr(III) is unstable and susceptible to the influence of environmental factors, such as dissolved organic matter (DOM) and light, so Cr species embedded in mineral crystal layers are likely to have more profound negative effects on the environment with the photochemical behaviors of minerals. However, the photochemical behaviors of Fh-Cr(III) in the presence of DOM remains poorly understood. For this reason, citric acid (CA) was chosen as the representative DOM to study its combined effects with visible light irradiation on Fh-Cr(III) dissolution and phase transition. The results showed that CA hindered the agglomeration of Fh-Cr(III) particles, thereby slowing the phase transition of Fh-Cr(III). However, CA exacerbated the release of Fe and Cr by maintaining Fh-Cr(III) under unstable crystal structure. Moreover, due to the occurrence of ligand-metal charge transfer (LMCT) in (CA)n-Fh-Cr(III) formed on the Fh-Cr(III) surface, the synergistic effect between CA and light irradiation greatly promoted the dissolution of Fh-Cr(III). In the mixed system of Fh-Cr(III) (3 g/L) and CA (5 mM) at initial pH 3.0, the maximum concentrations of TFe and TCr were 18.17 and 5.68 mg/L after 6 h of light reaction, which were 1.82 and 3.62 times of those in the corresponding system in the darkness. Meanwhile, the Fe(III)/Fe(II) cycling in solution and solid surfaces was affected by various reactive oxygen species (ROS) generated from the LMCT process, in which the photoproduced Fe(II) further accelerated Cr(III) dissolution under acidic solution. The fast release of Cr(III) may pose greater danger to the environment as the more toxic Cr(VI) can be easily formed through the oxidation of dissolved Cr(III). This work offers fresh insights into the migration and transformation of Cr elements in the natural environment.

3D Printed Porous Zirconia Biomaterials based on Triply Periodic Minimal Surfaces Promote Osseointegration In Vitro by Regulating Osteoimmunomodulation and Osteo/Angiogenesis.

The triply periodic minimal surface (TPMS) is a highly useful structure for bone tissue engineering owing to its nearly nonexistent average surface curvature, high surface area-to-volume ratio, and exceptional mechanical energy absorption properties. However, limited literature is available regarding bionic zirconia implants using the TPMS structure for bone regeneration. Herein, we employed the digital light processing (DLP) technology to fabricate four types of zirconia-based TPMS structures: P-cell, S14, IWP, and Gyroid. For cell proliferation, the four porous TPMS structures outperformed the solid zirconia group (P-cell > S14 > Gyroid > IWP > ZrO2). In vitro assessments on the biological responses and osteogenic properties of the distinct porous surfaces identified the IWP and Gyroid structures as promising candidates for future clinical applications of porous zirconia implants because of their superior osteogenic capabilities (IWP > Gyroid > S14 > P-cell > ZrO2) and mechanical properties (ZrO2 > IWP > Gyroid > S14 > P-cell). Furthermore, the physical properties of the IWP/Gyroid surface had more substantial effects on bone immune regulation by reducing macrophage M1 phenotype polarization while increasing M2 phenotype polarization compared with the solid zirconia surface. Additionally, the IWP and Gyroid groups exhibited enhanced immune osteogenesis and angiogenesis abilities. Collectively, these findings highlight the substantial impact of topology on bone/angiogenesis and immune regulation in promoting bone integration.

Elucidating the role of water films on solute diffusion in unsaturated porous media by improved pore‐scale modeling

AbstractSolute diffusion in partially saturated porous media is an important fundamental process in many natural and environmental systems. At low water saturation, the solute transport is governed by the diffusion in thin water films on the surfaces of solids. In this study, we established an improved pore‐scale simulation framework successfully describing the solute diffusion in variably saturated porous media (e.g., soils), which considers the contribution of the diffusion within the thin water film on the surface of the solid matrix. The model takes into account the liquid–gas distribution in the underlying porous media by the Shan‐Chen lattice Boltzmann Method (LBM) and simulates the solute diffusion in the bulk liquid phase and the water film. Based on the numerical results, an easy‐to‐use theoretical formula was also developed to predict the effective diffusivity in microporous materials at low saturation levels. The average relative error of its prediction with respect to the experimental data from the literature is about 30%, while that of the classical power law exceeds 70%. A simple phase diagram was defined, which allows us to identify the situations under which it is necessary to take the influence of surface water films on the effective diffusivity in unsaturated microporous media into account. The present study improves the pore‐scale model to address solute diffusion in the water films at low water saturation and elucidates the contribution of thin water films on solute transport.

High-Throughput Computational Screening of Solid-Binding Peptides.

Inspired by biomineralization, a naturally occurring, protein-facilitated process, solid-binding peptides (SBPs) have gained much attention for their potential to fabricate various shaped nanocrystals and hierarchical nanostructures. The advantage of SBPs over other traditionally used synthetic polymers or short ligands is their tunable interaction with the solid material surface via carefully programmed sequence and being solution-dependent simultaneously. However, designing a sequence with targeted binding affinity or selectivity often involves intensive processes such as phage display, and only a limited number of sequences can be identified. Other computational efforts have also been introduced, but the validation process remains prohibitively expensive once a suitable sequence has been identified. In this paper, we present a new model to rapidly estimate the binding free energy of any given sequence to a solid surface. We show how the overall binding of a polypeptide can be estimated from the free energy contribution of each residue based on the statistics of the thermodynamically stable structure ensemble. We validated our model using five silica-binding peptides of different binding affinities and lengths and showed that the model is accurate and robust across a wider range of chemistries and binding strengths. The computational cost of this method can be as low as 3% of the commonly used enhanced sampling scheme for similar studies and has a great potential to be used in high-throughput algorithms to obtain larger training data sets for machine learning SBP screening.

New insights into head-on bouncing of unequal-size droplets on a wetting surface

The impact of a liquid droplet with another droplet or onto a solid surface are important basic processes that occur in many applications such as agricultural sprays and inkjet printing, and in nature such as pathogens transport by raindrops. We investigated the head-on collision of unequal-size droplets of the same liquid on wetting surfaces using the direct numerical simulations technique at different size ratios. The unsteady Navier–Stokes equations are solved and the liquid–gas interface is tracked using the geometric volume-of-fluid method. The numerical model is validated by comparing simulation results of two extreme cases of droplets bouncing with the experimental data from previous studies and the agreement is quite accurate. The validated model is employed to simulate droplets bouncing at several size ratios at different Weber numbers and Ohnesorge number. Two distinct regimes are identified, namely, the inertial regime, where the restitution coefficient is a constant value close to 0.3, the viscous regime, where the restitution coefficient declines. To understand the bouncing behaviour, the velocity field is analysed and an energy budget calculation is performed. The distribution of the sessile droplet energy is found to be important and the sessile droplet surface energy is calculated by its deformation characteristics such as crater depth. Finally, a scaling analysis is performed to rationalize the insensitivity of the coefficient of restitution in the inertial regime, and its decline in the viscous regime, at large size ratios.

Thermal Analysis of a Casson Boundary Layer Flow over a Penetrable Stretching Porous Wedge

This work aims to analyze the Casson thermal boundary layer flow over an expanding wedge in a porous medium with convective boundary conditions and ohmic heating. Moreover, the effects of porosity and viscous dissipation are studied in detail and included in the analysis. The importance of this study is due to its applications in biomedical engineering where the analysis of behavior of non-Newtonian blood flow in arteries and veins is desired. Within the context of blood flow, it is also applicable to many other fields, for instance, radiative therapy, MHD generators, soil machines, melt-spinning, and insulation processes. The modeled problem is a set of PDEs, which is nondimensionalized to derive a nonlinear boundary value problem (BVP). The obtained BVP is solved using the shooting technique, endowed with the order four Runge-Kutta and Newton methods. The impact of different parameters on the momentum and temperature fields is investigated along with two important parameters of physical significance, i.e., the Nusselt number and the surface drag force. Results are validated, and an excellent agreement is seen for the parameters of interest using MATLAB built-in function bvp4c. A significant finding is that by increasing the Casson liquid parameter, the velocity decreases as the wedge expands quicker than the free stream velocity at R=2. However, the velocity increases for the case when R=0.1. A decrease in the Darcy number increases the temperature profile. Furthermore, the convective parameter accelerated the heat transmission rate, and a rise in the Prandtl number thickens the thermal boundary layer. The findings of this investigation contribute to problems in fluid dynamics and heat transfer that involve studying the behavior of a non-Newtonian fluid with Casson rheological properties near a solid porous wedge surface.

Bioburden detection on surface and water samples in a rapid, ultra-sensitive and high-throughput manner.

Bioburden detection is crucial for food, water, and biopharmaceutical applications as it can directly impact public health. The objective of this study is to develop and validate an assay and protocol for detecting bioburden on solid surfaces, as well as in water, with high sensitivity and accuracy in a rapid manner. Henceforth, a resazurin-based assay optimized for detecting bioburden has been integrated with a previously developed portable multichannel fluorometer. The microbes were isolated from solid surfaces in different laboratory settings by swabbing technique, and stream water was collected for contamination analysis. Based on the results, the assay and protocol can successfully detect bioburden as low as 20 CFU/cm2 and 10 CFU/mL present in both surface and water samples, respectively.

Study on the mechanical properties and ballistic resistance of interface-modified fabrics with environmentally friendly shear thickening liquid

Based on the modification of industrial solid waste and surface grafting of functional groups to prepare new ballistic composites with green shear thickening functionality, ammonia-modified silica (NH4-SA) particles were successfully prepared from industrial solid waste through APTMS surface modification, and the modified NH4-SA was used as the shear thickening dispersed phase to regulate the green shear thickening solution, and in order to better achieve the grafting loading of the particles of the dispersed phase, the aramid fabric (AF) was metal ion modified. Ballistic resistance was tested by combining a solid waste-based modified shear thickening fluid (NH4-SA@STF) with a metal ion modified AF fabric. Characterization tests confirmed that NH4-SA@STF exhibited a significant shear thickening effect due to the addition of reactive functional groups on the surface of NH4-SA. Yarn pull-out tests showed that NH4-SA@STF/Fe-AF had a 4-fold increase in pull-out force and better friction properties compared to AF fabrics. Ballistic tests demonstrated that NH4-SA@STF increased the ballistic limiting velocity (Vbl) of AF fabrics from 52 m/s to 99 m/s. Both layer impregnation modification and individual impregnation treatment of each layer showed strong ballistic performance, indicating that NH4-SA@STF/Fe-AF composites exhibited superior ballistic performance compared to AF fabrics. The doping of NH4-SA enhanced the friction between the yarns and increased the load-bearing area of the fabric, resulting in improved ballistic performance of NH4-SA@STF/Fe-AF composites. The study successfully achieved the regulation of ballistic properties in NH4-SA@STF/Fe-AF composites, providing a promising approach for the development of new ballistic materials with green shear thickening functionality.

On-chip bioluminescence biosensor for the detection of microbial surface contamination

Detection of microbial pathogens is important for food safety reasons, and for monitoring sanitation in laboratory environments and health care settings. Traditional detection methods such as culture-based and nucleic acid-based methods are time-consuming, laborious, and require expensive laboratory equipment. Recently, ATP-based bioluminescence methods were developed to assess surface contamination, with commercial products available. In this study, we introduce a biosensor based on a CMOS image sensor for ATP-mediated chemiluminescence detection. The original lens and IR filter were removed from the CMOS sensor revealing a 12 MP periodic microlens/pixel array on an area of 6.5 mm × 3.6 mm. UltraSnap swabs are used to collect samples from solid surfaces including personal electronic devices, and office and laboratory equipment. Samples mixed with chemiluminescence reagents were placed directly on the surface of the image sensor. Close proximity of the sample to the photodiode array leads to high photon collection efficiency. The population of microorganisms can be assessed and quantified by analyzing the intensity of measured chemiluminescence. We report a linear range and limit of detection for measuring ATP in UltraSnap buffer of 10–1000 nM and 225 fmol, respectively. The performance of the CMOS-based device was compared to a commercial luminometer, and a high correlation with a Pearson's correlation coefficient of 0.98589 was obtained. The Bland-Altman plot showed no significant bias between the results of the two methods. Finally, microbial contamination of different surfaces was analyzed with both methods, and the CMOS biosensor exhibited the same trend as the commercial luminometer.

Femtosecond laser turn droplets controllable bouncing

Droplets controllable bouncing on solid surfaces plays a vital role in microfluidic operation, liquid collection, and chemical micro reaction applications, which has attracted widespread attention. However, strategies to realize controllable bouncing of droplets on solid surface are still elusive and nanofabrication patterning methods are generally complex and time consuming. Here, we propose a simple and fast method to fabricate heterogeneously wettable surfaces on aluminum sheets by femtosecond laser processing followed by wax treatment. The surface is comprised of superhydrophobic regions with a water contact angle (WCA) of ∼ 159.5°and superhydrophilic regions with a WCA of ∼ 1.8°. The heterogeneous wettability in specific designs can control droplet bouncing motions when impacting the surface. Therefore, the liquid droplets are regulated to rotate and controllably bounce for achieving various functions, including climbing, combining, and driving small boats. This work demonstrates a facile way to fabricate patternable heterogeneous wettability surfaces for manipulating droplets and achieving multifunctional bouncing motions. Our simple, effective, and environmentally friendly method holds promise for transformative advancements in electric power generation, pharmaceutical development and manufacturing, as well as the realm of self-driving actuators.

Microwave device for heat treatment of meat by-products and waste

BACKGROUND: In the conditions of farms, there is a problem of neutralizing unpleasant odors during heat treatment of secondary meat raw materials to preserve the consumer properties of protein feed at low operating costs. AIM: Development of the device for heat treatment with disinfection and neutralization of the unpleasant odor of crushed secondary meat raw materials with the integral effect of an ultra−high frequency electromagnetic field, a bactericidal flow of UV rays and ozone in a continuous mode with electromagnetic safety ensured. METHODS: The raw materials are the stomach chambers of ruminants. The basic idea, principle of operation and design of the device are based on the propagation of microwave oscillations in a resonator with a spiral decelerating system. The microwave device contains a non-ferromagnetic cylinder with a perforated lower base, a coaxially arranged non-ferromagnetic spiral cylinder and an electrically driven fluoroplastic auger with a solid screw surface. The average perimeter of the annular volume, between the cylinder and the spiral cylinder forming the coaxial resonator, and its height are multiples of half-wavelength. Corona brushes are mounted to the annular base of the cylinder, under which electric gas discharge lamps powered by 1 kHz frequency generators are radially located, and a ceramic annular spherical surface is located under the lamps. Magnetrons are mounted along the perimeter of the outer cylinder with a shift of 120 degrees. The crackling is removed using a pneumatic conveyor. RESULTS: The feature of the coaxial resonator is that the inner core is formed as a spiral decelerating system. Therefore, the intrinsic Q-factor of the resonator is high, about 115000, therefore, the expected thermal efficiency is 0.7–0.75. The factor of dielectric losses of raw materials with a decrease in humidity from 76% to 30% is reduced by five times. Thus, while keeping the electric stress at the level of 1.2–2 kV/cm, the electromagnetic field power dissipated in a unit of the volume of the crackling decreases by five times, from 34 500 to 6800 W/cm3. CONCLUSIONS: A new design solution with a spiral coaxial resonator, the use of a ceramic reflector, and a number of physical factors made it possible to develop the design of the operation chamber for the heat treatment of ruminant slaughter waste with the neutralization of unpleasant odors with a capacity of 30–35 kg/h and specific energy costs of 0.16–0.19 kWh/kg.

Proximity to the water surface markedly enhances the force production on underwater flapping wings.

The potential application of flapping wings in micro-aerial vehicles is gaining interest due to their ability to generate high lift even in confined spaces. Most studies in the past have investigated hovering wings as well as those flapping near solid surfaces. However, the presence of surface tension at the water-air interface and the ability of the water surface to move might differentiate its response to the proximity of wings, compared to that of solid surfaces. Motivated by underwater, amphibian robots and several underwater experimental studies on flapping wings, our study investigated the effects of the proximity of flapping wings to the water surface at low Reynolds numbers (Re = 3400). Experiments were performed on a rectangular wing in a water tank with prescribed flapping kinematics and the aerodynamic forces were measured. The effects of surface proximity on the wing in its both upright and inverted orientations were studied. Broadly, the mean lift and drag coefficients in both orientations decreased significantly (by up to 60%) as the distance from the water surface was increased. In the case of the upright orientation, the mean lift coefficient was slightly decreased very close to the water surface with its peak being observed at the normalized clearance of [Formula: see text]. Overall, the study revealed an enhancement in the aerodynamic forces closer to the water surface.

Deformation and rupture of Janus nanoparticle-stabilized Pickering emulsion in confined channel

The interaction between Pickering emulsions and confined channels is vital for their industrial applications. However, how solid particle shells modulate the deformation stability and rupture limit of Pickering emulsions in contact with wall remains poorly understood. In this work, mechanical deformation and rupture of Janus nanoparticles (JNP)-stabilized Pickering emulsions on solid surfaces are elaborated by molecular dynamics (MD) simulations. A universal master-type predictive model is developed for the first time to describe the contact behavior of Pickering emulsions against surfaces with distinct wettability. The contact stress of an emulsion is determined by the equivalent elastic modulus of the emulsion, geometric deformation function, and the influence of the JNP shell and its interactions. Moreover, hydrophobic surfaces lead to the rupture of Pickering emulsions in compression. The rupture can be delayed by increasing JNP surface coverage (ϕ). Especially, once ϕ reaches a critical value, the JNP shell can form an ordered quasi-solid structure, significantly enhancing the emulsion stability. These results can aid in the design or screening of specific Pickering emulsions to manage their deformation and rupture on the solid surface, in applications ranging from water treatment and drug delivery to environmental remediation and mobility control in oil recovery.