Solid Substrate Research Articles

Enhancement of the Rate of Surface Reactions by the Elastocapillary Effect.

We examined the effect of deformability of a solid substrate on the kinetics of a surface reaction that occurs between chemical species present in it and a liquid dispensed on it. In particular, we have dispensed aqueous solutions of gold and silver salt as sessile drops or as a liquid pool on a cross-linked film of poly(dimethylsiloxane) (PDMS). The PDMS surface contains organosilane (SiH), which reduces the salt, producing metallic nanoparticles at the solid-liquid interface. These experiments reveal that, for a sufficiently soft solid, the reaction proceeds about three times faster in the drop mode than in the pool mode. The reaction conditions in both cases remain exactly identical except that, for the drop, the vertical component of the liquid surface tension deforms the solid substrate at the three-phase contact line. We have estimated the solid-liquid and solid-air interfacial energy, which along with the surface energy of the liquid gives an estimate of excess free energy. This energy is found to be different for the drop and pool modes. By considering that this excess free energy decreases the activation energy barrier for the reaction, we have shown that the reaction rate constant in the drop mode should indeed exceed that in the pool mode by about three times.

Probing Interfacial Aging of Model Adhesion Joints under a Hygrothermal Environment at a Molecular Level.

Generally, for adhesive joints, the polar water molecules in humid environments can have a critical effect on the interfacial structures and structural evolution adjacent to the solid substrates. Regarding this, it is still a big challenge to detect and understand the interfacial hygrothermal aging process at the molecular level in real time and in situ. In this study, to trace the interfacial hygrothermal aging process of a classical epoxy formula containing diglycidyl ether of biphenyl A (DGEBA) and 2,2'-(ethylenedioxy) diethylamine (EDDA) with sapphire and fused silica in a typical hygrothermal environment (85 °C and 85% RH), sum frequency generation (SFG) vibrational spectroscopy was used to probe the molecular-level interfacial structural change over the time. The structural evolution dynamics at the buried epoxy/sapphire and epoxy/silica interfaces upon hygrothermal aging were revealed directly in situ. The interfacial delamination during hygrothermal aging was also elucidated from the molecular level. Upon hygrothermal aging, the interfacial CH signals, such as the ones from methyl, methylene, and phenyl groups, decreased significantly and the water OH signals increased substantially, indicating the water molecules had diffused into the interfaces and destroyed the original interactions between the epoxy formula and the substrates. Further analysis indicates that when the integrated signals in the CH range declined to their minimum and leveled off, the interfacial delamination happened. The tensile experiment proved the validity of these spectroscopic experimental results. Our study provides first-hand and molecular-level evidence on a direct correlation between the diffusion of the surrounding water molecules into the interface and the evolution/destruction of the interfacial structures during hygrothermal aging. More importantly, it is proved, SFG can be developed into a powerful tool to noninvasively reveal the local interfacial delamination in real time and in situ under extreme hygrothermal conditions, complemented by the mechanic test.

Depletion-Induced Self-Assembly of Colloidal Particles on a Solid Substrate.

We investigate the depletion contributions to the self-assembly of microcolloids on solid substrates. The assembly is driven by the exclusion of nanoparticles and nonadsorbing polymers from the depletion zone between the microcolloids in the liquid and the underlying substrate. The model system consists of 1 μm polystyrene particles that we deposit on a flat glass slab in an electrolyte solution. Using polystyrene nanoparticles and poly(acrylic acid) polymers as depleting agents, we demonstrate in our experiments that nanoparticle concentrations of 0.5% (w/v) support well-ordered packing of microcolloids on glass, while the presence of polymers leads to irregular aggregate deposition structures. A mixture of nanoparticles and polymers enhances the formation of colloidal aggregate and particulate surface coverage compared to using the polymers alone as a depletion agent. Moreover, tuning the polymer ionization state from pH 4 to 9 modifies the polymer conformational state and radius of gyration, which in turn alters the microcolloid deposition from compact multilayers to flocculated structures. Our study provides entropic strategies for manipulating particulate assembly on substrates from dispersed to continuous coatings.

Molecular Dynamics Study of the Microscopic Mechanical Balance at the Three-Phase Contact Line of Interfacial Nanobubble.

This study reveals the microscopic mechanical balance at the three-phase contact line (TPCL) of an interfacial nanobubble on a substrate with a wettability pattern using molecular dynamics simulations. The apparent contact angle was compared to that evaluated using Young's equation, in which the interfacial tensions were computed using a mechanical route. The comparison was conducted by changing the wettability of the substrate from hydrophilic to neutral while maintaining a hydrophobic region in the center of the substrate. When the wettability pattern pins the TPCL at the wettability boundary, the contact angle computed by Young's equation is larger than the apparent contact angle because a pinning force exists in the inward direction of the nanobubble. Conversely, on the surfaces where the wettability pattern does not pin the TPCL, the contact angle computed by Young's equation agrees with the apparent contact angle because the pinning force disappears. The distribution of principal stresses around the TPCL, which was visualized for the first time in this study, indicates that large compressive principal stresses exist between the liquid phase and the solid substrate interface, which pin the TPCL at the surface wettability boundary, and that the maximum principal stress occurs in the inward direction of the nanobubbles at the TPCL. The normalized pinning force estimated from the maximum principal stress is equivalent to that measured experimentally.

Single‐Particle and Single‐Molecule Characterization of Immobilized Enzymes: A Multiscale Path toward Optimizing Heterogeneous Biocatalysts

AbstractHeterogeneous biocatalysis is highly relevant in biotechnology as it offers several benefits and practical uses. To leverage the full potential of heterogeneous biocatalysts, the establishment of well‐crafted protocols, and a deeper comprehension of enzyme immobilization on solid substrates are essential. These endeavors seek to optimize immobilized biocatalysts, ensuring maximal enzyme performance within confined spaces. For this aim, multidimensional characterization of heterogeneous biocatalysts is required. In this context, spectroscopic and microscopic methodologies conducted at different space and temporal scales can inform about the intraparticle enzyme kinetics, the enzyme spatial distribution, and the mass transport issues. In this Minireview, we identify enzyme immobilization, enzyme catalysis, and enzyme inactivation as the three main processes for which advanced characterization tools unveil fundamental information. Recent advances in operando characterization of immobilized enzymes at the single‐particle (SP) and single‐molecule (SM) levels inform about their functional properties, unlocking the full potential of heterogeneous biocatalysis toward biotechnological applications.

Single-Particle and Single-Molecule Characterization of Immobilized Enzymes: A Multiscale Path toward Optimizing Heterogeneous Biocatalysts.

Heterogeneous biocatalysis is highly relevant in biotechnology as it offers several benefits and practical uses. To leverage the full potential of heterogeneous biocatalysts, the establishment of well-crafted protocols, and a deeper comprehension of enzyme immobilization on solid substrates are essential. These endeavors seek to optimize immobilized biocatalysts, ensuring maximal enzyme performance within confined spaces. For this aim, multidimensional characterization of heterogeneous biocatalysts is required. In this context, spectroscopic and microscopic methodologies conducted at different space and temporal scales can inform about the intraparticle enzyme kinetics, the enzyme spatial distribution, and the mass transport issues. In this Minireview, we identify enzyme immobilization, enzyme catalysis, and enzyme inactivation as the three main processes for which advanced characterization tools unveil fundamental information. Recent advances in operando characterization of immobilized enzymes at the single-particle (SP) and single-molecule (SM) levels inform about their functional properties, unlocking the full potential of heterogeneous biocatalysis toward biotechnological applications.

Hydrogen-bonding induced assembly of polymer-grafted nanoparticles towards photothermal antibacterial activities

The multiple hydrogen-bond has been introduced as a reversible driving force for directing the assembly of polymer-grafted nanoparticles (PGNPs). The complementary hydrogen-bonds among the polymer ligands lead to the spontaneous aggregation of PGNPs. However, it may also induce the uncontrollable aggregation of PGNPs into assemblies with non-uniform size, even irregular precipitates, due to the immoderate agglomeration associated with the strong interactions of multiple hydrogen-bonds. This severely limits the stable dispersion of PGNP aggregates in a solvent and their applications. In this work, the gold nanoparticles (AuNPs) grafted with thymine-terminated polystyrene (AuNP@PS-Thy) and diaminopyridine-terminated polystyrene (AuNP@PS-Dap) were synthesized, respectively. Their thermal-responsive assembly behavior in an organic solvent was systematically studied. By optimizing the assembly conditions, i.e., the concentration of PGNPs and the incubation time, the assemblies of AuNP@PS-Thy/AuNP@PS-Dap with controllable size were obtained. Interestingly, the assemblies deposited on a solid substrate showed excellent photothermal antimicrobial activities under irradiation of 808 nm and 655 nm lasers. The killing percentage of Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) could reach 99 % after irradiating for 10 min. This work establishes an approach for controlling the hydrogen-bonding-induced assembly behavior of PGNPs, which may be extended to construct functional metamaterials with controllable structures.

Plasmonic Properties of Self-Assembled Gold Nanocrescents: Implications for Chemical Sensing.

A bottom-up approach, the Langmuir-Blodgett technique, is used for the preparation of composite thin films of gold nanoparticles and polymers: poly(styrene-b-2-vinylpyridine), poly-2-vinylpyridine, and polystyrene. The self-assembly of poly(styrene-b-2-vinylpyridine) at the air-water interface leads to the formation of surface micelles, which serve as a template for the organization of gold nanoparticles into ring assemblies. By using poly-2-vinylpyridine in conjunction with low surface pressure, the distance between nanostructures can be increased, allowing for optical characterization of single nanostructures. Once deposited on a solid substrate, the preorganized gold nanoparticles are subjected to further growth by the reduction of additional gold, leading to a variety of nanostructures which can be divided into two categories: nanocrescents and circular arrays of nanoparticles. The optical properties of individual structures are investigated by optical dark-field spectroscopy and numerical calculations. The plasmonic behavior of the nanostructures is elucidated through the correlation of optical properties with structural features and the identification of dominant plasmon modes. Being based on a self-assembly approach, the reported method allows for the formation of interesting plasmonic materials under ambient conditions, at a relatively large scale, and at low cost. These attributes, in addition to the resonances located in the near-infrared region of the spectrum, make nanocrescents candidates for biological and chemical sensing.

Processing of Thin Films Based on Cellulose Nanocrystals and Biodegradable Polymers by Space-Confined Solvent Vapor Annealing and Morphological Characteristics.

L-poly(lactic acid), poly(3-hydroxybutyrate), and poly-hydroxybutyrate-co-hydroxyvalerate are biodegradable polymers that can be obtained from renewable biomass sources. The aim of this study was to develop three types of environmentally friendly film biocomposites of altered microstructure by combining each of the above-mentioned polymers with cellulose nanocrystal fillers and further processing the resulting materials via space-confined solvent vapor annealing. Cellulose was previously obtained from renewable biomass and further converted to cellulose nanocrystals by hydrolysis with the lactic acid. The solutions of biodegradable polymers were spin-coated onto solid substrates before and after the addition of cellulose nanocrystals. The obtained thin film composites were further processed via space-confined solvent vapor annealing to eventually favor their crystallization and, thus, to alter the final microstructure. Indeed, atomic force microscopy studies have revealed that the presence of cellulose nanocrystals within a biodegradable polymer matrix promoted the formation of large crystalline structures exhibiting fractal-, spherulitic- or needle-like morphologies.

Measurement of Distribution Constants Between Air and Solid Substrates Using Gas Chromatography for Quantification of Hydrocarbons in Solid Substrates via Headspace-Solid Phase Microextraction

Measurement of Distribution Constants Between Air and Solid Substrates Using Gas Chromatography for Quantification of Hydrocarbons in Solid Substrates via Headspace-Solid Phase Microextraction

Rewritable printing of ionic liquid nanofilm utilizing focused ion beam induced film wetting

Manipulating liquid flow over open solid substrate at nanoscale is important for printing, sensing, and energy devices. The predominant methods of liquid maneuvering usually involve complicated surface fabrications, while recent attempts employing external stimuli face difficulties in attaining nanoscale flow control. Here we report a largely unexplored ion beam induced film wetting (IBFW) technology for open surface nanofluidics. Local electrostatic forces, which are generated by the unique charging effect of Helium focused ion beam (HFIB), induce precursor film of ionic liquid and the disjoining pressure propels and stabilizes the nanofilm with desired patterns. The IBFW technique eliminates the complicated surface fabrication procedures to achieve nanoscale flow in a controllable and rewritable manner. By combining with electrochemical deposition, various solid materials with desired patterns can be produced.

Polydopamine films: Versatile but interface-dependent coatings

Abstract Polydopamine coatings have been shown to allow to coat almost all materials with conformal films having a tunable thickness from a few up to more than 100 nm (and even more in some specific cases). These films are able to reduce metal cations, to be modified with many chemical moieties and advent hence as a “Holy Grail” in surface chemistry with an impressive amount of applicative papers published since 2007. However, the broad application field and ease of deposition from aqueous solutions hidden the complexity of the deposition mechanism(s). The discovery that polydopamine (PDA) films also form at air/water interfaces (in the absence of stirring or in stirring dependent manner) to yield membranes with physicochemical properties different than PDA films deposited at solid/water interfaces highlighted for the first time that the nature of the interfaces plays a major role in the PDA film growth mechanism and in the film properties. More recent research allowed to show that the surface chemistry of the used solid substrate modifies the composition of the thin deposited PDA film during the early stages of the deposition process with further deposition yielding to an almost substrate-independent PDA film. It is the aim of this review to describe complex surface effects occurring in PDA deposition and hence to complement other reviews which described the complexity of the chemistry yielding to PDA coatings.

Amphiphilic Post‐Modification of Red Algae‐Derived Carrageenan Coatings for Balanced Marine Antifouling Applications

AbstractPolysaccharide coatings are of interest for marine antifouling applications because of their good marine antifouling properties and environmentally benign characteristics. However, the hydrophilic nature of polysaccharide coatings can lead to the adsorption of marine sediment, which can negatively impact their antifouling properties. Amphiphilic modification of polysaccharide coatings has been demonstrated to address these issues. In this study, we report a simple method for post‐modification of a sulfated polysaccharide carrageenan (CAR) coating to make it amphiphilic. A hydrophilic CAR coating is first formed on solid substrates, followed by grafting hydrophobic molecules onto the CAR‐coated surfaces through metal‐ion‐mediated coordinate bond formation. The resulting amphiphilic CAR coating effectively reduces both marine sediment (silt) adsorption and marine diatom adhesion, achieving a balanced marine antifouling performance.

A shape-predictive model for the spreading of photo-curable polymers in material extrusion additive manufacturing

Recently, there is a growing interest in material extrusion to print thermoset resins to manufacture large format and high-performance parts. However, the fidelity and mechanical integrity of the printed parts are limited by challenges such as uncontrolled spreading of individual beads (filament/droplet) after deposition and during cure. There is a considerable lack of experimental and theoretical studies on the spreading of reactive beads on solid substrates. In this work, we studied the simultaneous spreading and photo-curing of the photopolymerizable thermoset beads via experiment and numerical simulations. We used a novel experimental setup to track the spreading of droplets and filaments during photopolymerization and validate a moving mesh computational fluid dynamics (CFD) model. The CFD model was used to develop an approach (predictive model) to accurately predict the final spreading coefficient of cured resin beads without the need for full numerical simulations. The predictive model combines the generalized theory of a Newtonian spreading filament with a characteristic viscosity μave and time to gelation, τgel. Interestingly, μave is shown to be a material parameter that does not depend on processing conditions, but only on the material’s chemorheology. The predictive model is tested against a wide range of chemorheology and cure kinetic parameters and found to be in excellent agreement with the full numerical CFD simulations. This work will be very useful in estimating the final shape of beads during the material extrusion printing process, as well as a model to successfully parameterize extrusion-based 3D printers to control the shape of printed beads a-priori.

Investigation of the spreading of a liquid metal droplet under a vertical magnetic field

In the liquid metal divertor of a magnetic confinement fusion device, the spreading characteristics of the liquid metal are crucial for ensuring the stable operation of the divertor. This study has experimentally investigated the spreading characteristics of a GaInSn alloy droplet on a solid substrate under a strong vertical magnetic field, with the magnetic field intensity ranging from 0 to 2.5 T. First, several parameters of the droplet, such as droplet shape, spreading factor, dynamic contact angle, spreading velocity, and rebound behavior after impacting, were studied without a magnetic field. The fitting relationship between maximum spreading factor βmax and Weber number We was obtained and has been compared with the scaling laws from the literature. Furthermore, the effect of the vertical magnetic field on those parameters has been investigated systematically. Quantitative results on βmax and the maximum spreading time tDmax, varied with the Hartmann number (Ha) and the We number, provide a comprehensive understanding of the spreading dynamics. The specific relationship between βmax and We number under different magnetic field intensities (B) shows that a vertical magnetic field has a great inhibiting effect on liquid metal droplet spreading. Finally, the influence of oxidation on droplet spreading characteristics also has been studied. These basic findings are important for the application of liquid metal on a divertor/limiter in a fusion reactor, offering a theoretical reference engineering design.

Pressure‐dependent adhesion between solid‐supported PC‐lipid bilayers and vesicles under electric fields

AbstractFusion of lipid bilayers in membranes is important in processes from vesicle‐cell interactions (as in drug delivery) to exosome‐cell signaling, while transient transmembrane electric fields are known to occur spontaneously. Two contacting phosphatidylcholine (PC) lipid membranes are known to fuse into one under external electric fields, suggesting that the interaction between them is modified by the field as they approach, prior to the fusion event. Here we measure directly the adhesion energy between dimyristoylphosphatidylcholine (DMPC) and between distearoylphosphatidylcholine (DSPC) surface layers attached to solid substrates both without and with a transmembrane electric field. We find a marked pressure‐dependent adhesion behavior in the electric field, which we attribute to fusion intermediates that are formed, shedding new light on membrane electro‐fusion.

Electromagnetic Mill-Promoted Palladium-Catalyzed Heck-Type Cyclization/Decarboxylative Coupling of (Z)-1-Iodo-1,6-diene with Propiolic Acids.

Electromagnetic mill (EMM)-promoted solid-state cascade Heck-type cyclization/decarboxylative coupling of propiolic acid with (Z)-1-iodo-1,6-diene derivate was demonstrated. The reaction was realized via palladium catalysis, which is solvent-free and involves no additional heating. The collision between ferromagnetic rods could not only be a favor to the mixing between the solid substrates and the catalyst system, but also the thermogenic action could accelerate this transformation. More importantly, this EMM strategy realized multiple bond construction under mechanochemical conditions in one pot.

Studying the Effects and Competitive Mechanisms of YOYO-1 on the Binding Characteristics of DOX and DNA Molecules Based on Surface-Enhanced Raman Spectroscopy and Molecular Docking Techniques.

Revealing the interaction mechanisms between anticancer drugs and target DNA molecules at the single-molecule level is a hot research topic in the interdisciplinary fields of biophysical chemistry and pharmaceutical engineering. When fluorescence imaging technology is employed to carry out this kind of research, a knotty problem due to fluorescent dye molecules and drug molecules acting on a DNA molecule simultaneously is encountered. In this paper, based on self-made novel solid active substrates NpAA/(ZnO-ZnCl2)/AuNPs, we use a surface-enhanced Raman spectroscopy method, inverted fluorescence microscope technology, and a molecular docking method to investigate the action of the fluorescent dye YOYO-1 and the drug DOX on calf thymus DNA (ctDNA) molecules and the influencing effects and competitive relationships of YOYO-1 on the binding properties of the ctDNA-DOX complex. The interaction sites and modes of action between the YOYO-1 and the ctDNA-DOX complex are systematically examined, and the DOX with the ctDNA-YOYO-1 are compared, and the impact of YOYO-1 on the stability of the ctDNA-DOX complex and the competitive mechanism between DOX and YOYO-1 acting with DNA molecules are elucidated. This study has helpful experimental guidance and a theoretical foundation to expound the mechanism of interaction between drugs and biomolecules at the single-molecule level.

Investigation of Rare Earth Element Binding to a Surface-Bound Affinity Peptide Derived from EF-Hand Loop I of Lanmodulin.

Bioinspired strategies have been given extensive attention for the recovery of rare earth elements (REEs) from waste streams because of their high selectivity, regeneration potential, and sustainability as well as low cost. Lanmodulin protein is an emerging biotechnology that is highly selective for REE binding. Mimicking lanmodulin with shorter peptides is advantageous because they are simpler and potentially easier to manipulate and optimize. Lanmodulin-derived peptides have been found to bind REEs, but their properties have not been explored when immobilized on solid substrates, which is required for many advanced separation technologies. Here, two peptides, LanM1 and scrambled LanM1, are designed from the EF-hand loop 1 of lanmodulin and investigated for their binding affinity toward different REEs when surface-bound. First, the ability of LanM1 to bind REEs was confirmed and characterized in solution using circular dichroism (CD), nuclear magnetic resonance (NMR), and molecular dynamics (MD) simulations for Ce(III) ions. Isothermal titration calorimetry (ITC) was used to further analyze the binding of the LanM1 to Ce(III), Nd(III), Eu(III), and Y(III) ions and in low-pH conditions. The performance of the immobilized peptides on a model gold surface was examined using a quartz crystal microbalance with dissipation (QCM-D). The studies show that the LanM1 peptide has a stronger REE binding affinity than that of scrambled LanM1 when in solution and when immobilized on a gold surface. QCM-D data were fit to the Langmuir adsorption model to estimate the surface-bound dissociation constant (Kd) of LanM1 with Ce(III) and Nd(III). The results indicate that LanM1 peptides maintain a high affinity for REEs when immobilized, and surface-bound LanM1 has no affinity for potential competitor calcium and copper ions. The utility of surface-bound LanM1 peptides was further demonstrated by immobilizing them to gold nanoparticles (GNPs) and capturing REEs from solution in experiments utilizing an Arsenazo III-based colorimetric dye displacement assay and ultraviolet-visible (UV-vis) spectrophotometry. The saturated adsorption capacity of GNPs was estimated to be around 3.5 μmol REE/g for Ce(III), Nd(III), Eu(III), and Y(III) ions, with no binding of non-REE Ca(II) ions observed.

Kinetic Model for the Heterogeneous Biocatalytic Reactions Using Tethered Cofactors.

Understanding the mechanism of interfacial enzyme kinetics is critical to the development of synthetic biological systems for the production of value-added chemicals. Here, the interfacial kinetics of the catalysis of β-nicotinamide adenine dinucleotide (NAD+)-dependent enzymes acting on NAD+ tethered to the surface of silica nanoparticles (SiNPs) has been investigated using two complementary and supporting kinetic approaches: enzyme excess and reactant (NAD+) excess. Kinetic models developed for these two approaches characterize several critical reaction steps including reversible enzyme adsorption, complexation, decomplexation, and catalysis of the surface-bound enzyme/NAD+ complex. The analysis reveals a concentrating effect resulting in a very high local concentration of enzyme and cofactor on the particle surface, in which the enzyme is saturated by surface-bound NAD, facilitating a rate enhancement of enzyme/NAD+ complexation and catalysis. This resulted in high enzyme efficiency within the tethered NAD+ system compared to that of the free enzyme/NAD+ system, which increases with decreasing enzyme concentration. The role of enzyme adsorption onto solid substrates with a tethered catalyst (such as NAD+) has potential for creating highly efficient flow biocatalytic systems.