Solid-state NMR Spectroscopy Research Articles

Structural changes of Natronomonas pharaonis halorhodopsin in its late photocycle revealed by solid-state NMR spectroscopy

Natronomonas pharaonis halorhodopsin (NpHR) is a light-driven Cl− inward pump that is widely used as an optogenetic tool. Although NpHR is previously extensively studied, its Cl− uptake process is not well understood from the protein structure perspective, mainly because in crystalline lattice, it has been difficult to analyze the structural changes associated with the Cl− uptake process. In this study, we used solid-state NMR to analyze NpHR both in the Cl−-bound and -free states under near-physiological transmembrane condition. Chemical shift perturbation analysis suggested that while the structural change caused by the Cl− depletion is widespread over the NpHR molecule, residues in the extracellular (EC) part of helix D exhibited significant conformational changes that may be related to the Cl− uptake process. By combining photochemical analysis and dynamic nuclear polarization (DNP)-enhanced solid-state NMR measurement on NpHR point mutants for the suggested residues, we confirmed their importance in the Cl− uptake process. In particular, we found the mutation at Ala165 position, located at the trimer interface, to an amino acid with bulky sidechain (A165V) significantly perturbs the late photocycle and disrupts its trimeric assembly in the Cl−-free state as well as during the ion-pumping cycle under the photo-irradiated condition. This strongly suggested an outward movement of helix D at EC part, disrupting the trimer integrity. Together with the spectroscopic data and known NpHR crystal structures, we proposed a model that this helix movement is required for creating the Cl− entrance path on the extracellular surface of the protein and is crucial to the Cl− uptake process.

Innovative ice mitigation: Exploring the potential of choline-based deep eutectic solvents and ionic liquids synergies

The development of anti-icing coatings for extremely low temperatures is still emerging. Deep eutectic solvents (DESs), as subset of ionic liquid (IL) analogues, have recently gained increasing attention for their unique and versatile applications. Given no investigation regarding anti-icing capabilities of DESs, our study focused on the exciting potential of choline-based DESs. The intriguing potential of hydrogen bonding through the synergistic combination of DESs and ILs offers significant promise for innovative solutions to ice-related challenges that remain largely unexplored. We conducted a comprehensive study on the anti-freezing properties of DESs by synthesizing choline-based ILs featuring both hydrophilic and hydrophobic anions. We aimed to explore how the diverse hydrogen-bond donors in DESs combined with the synthesized ILs to enhance the system’s ability to prevent ice formation. Substituting ethylene glycol (EG) with glycerol (GL) resulted in achieving an ice formation temperature of − 36 °C and an exceptionally low ice adhesion strength of 10 kPa, due to a thicker quasi-liquid layer on the coating surface, confirmed by solid-state NMR spectroscopy. The altered frost formation patterns of the DES-containing coatings demonstrated an enhance resistance against frost formation. This comprehensive study underscored the promising synergy between DESs and ILs for highly effective ice mitigation.

Coloring Tetrahedral Semiconductors: Synthesis and Photoluminescence Enhancement of Ternary II-III2-VI4 Colloidal Nanocrystals.

Ternary tetrahedral II-III2-VI4 semiconductors, where II is Zn or Cd, III In or Ga, and VI S, Se, or Te, are of interest in UV radiation detectors in medicine and space physics as well as CO2 photoreduction under visible light. We synthesize colloidal II-III2-VI4 semiconductor nanocrystals from readily available precursors and ascertain their ternary nature by structural and spectroscopic methods, including 77Se solid-state NMR spectroscopy. The pyramidally shaped nanocrystals range between 2 and 12 nm and exhibit optical gaps of 2-3.9 eV. In the presence of excess anions on the particle surface, treatment with Lewis acidic, Z-type ligands results in better passivation and enhanced photoluminescence. Electronic structure calculations reveal the most stable, lowest energy polymorphs and coloring patterns. This work will pave the way toward more environmentally friendly, ternary semiconductors for optoelectronics and electrocatalysis.

Revealing the Bro̷nsted Acidic Nature of Penta-Coordinated Aluminum Species in Dealuminated Zeolite Y with Solid-State NMR Spectroscopy.

The inevitable dealumination process of zeolite Y is closely related to ultrastabilization, enhanced Bro̷nsted acidity, and deactivation throughout its life cycle, producing complex aluminum and acidic hydroxyl species. Most investigations on dehydrated zeolites have focused on the Bro̷nsted acidity of tetra-coordinated Al (Al(IV)) and Lewis acidity associated with tricoordinated Al (Al(III)) sites, which has left the penta-coordinated Al (Al(V)) in dealuminated zeolites scarcely discussed. This is largely due to the oversimplified view of detectable Al(V) as an exclusively extra-framework species with Lewis acidity. Here we report the formation of Bro̷nsted acidic penta-coordinated Al species (Al(V)-BAS) in the dealumination process. Two-dimensional (2D) through-bond and multiquantum 1H-{27Al} correlation solid-state NMR experiments demonstrate the presence of a bridging Si-OH-Al(V) structure in dealuminated Y zeolites. Different from the conventional belief that water attack leads to the breaking of zeolite framework Al-O bonds in the initial stage of zeolite dealumination, the observed Al(V) as a dealumination intermediate is directly correlated with a BAS pair because of the direct dissociation of water on the framework tetrahedral aluminum (Al(IV)), thus bypassing the cleavage of Al-O bonds. 1H double-quantum solid-state NMR experiments and theoretical calculations provide further evidence for this mechanism, whereas pyridine adsorption experiments confirm stronger acidity of Al(V)-BASs than the traditional bridging hydroxyl groups associated with Al(IV). We were also able to detect the Al(V)-BAS site from dealuminated SSZ-13 zeolite with CHA topology, suggesting that its creation is not specific to the framework structure of zeolites.

Enhancing the Acidity Window of Zeolites by Low-Temperature Template Oxidation with Ozone.

Revisiting the impact of the first and often deemed trivial postsynthetic step, i.e., a high-temperature oxidative calcination to remove organic templates, increases our understanding of thermal acid site evolution and Al distributions. An unprecedented degree of control over the acidity of high-silica zeolites (SSZ-13) was achieved by using a low-temperature ozonation approach. Fourier transform infrared spectroscopy of adsorbed probe molecules and solid-state NMR spectroscopy reveal the complexity of the thermal evolution of acid sites. Low-temperature activated (ozonated) zeolites maintain the original Brønsted acidity content and high defect content and have virtually no Lewis acidity. They also preserve the "as-made" Al distribution after crystallization and show a clear link between synthesis conditions and divalent cation capacity, as measured with aqueous cobalt ion uptake. The synthesis protocol is found to be the main contributor to Al proximity, yielding record high exchange capacity when ozonated. After conventional calcination at 500-600 °C, however, the presence of water leads to the gradual depletion of Brønsted acid sites, in particular, in small crystals. This work indicates that low-temperature ozonation followed by thermal activation at different temperatures can be used as a novel tool for tuning the amount and nature of acid sites, providing insights into the activity of zeolites in acid-catalyzed reactions, such as CO2 hydrogenation to dimethyl ether, and thereby expanding the possibilities of rational acidity tuning.

Design of innovative and low-cost dopamine-biotin conjugate sensor for the efficient detection of protein and cancer cells

The rapid, precise identification and quantification of specific biomarkers, toxins, or pathogens is currently a key strategy for achieving more efficient diagnoses. Herein a dopamine-biotin monomer was synthetized and oxidized in the presence of hexamethylenediamine, to obtain adhesive coatings based on polydopamine-biotin (PDA-BT) on different materials to be used in targeted molecular therapy. Insight into the structure of the PDA-BT coating was obtained by solid-state 13C NMR spectroscopy acquired, for the first time, directly onto the coating, deposited on alumina spheres. The receptor binding capacity of the PDA-BT coating toward 4-hydroxyazobenzene-2-carboxylic acid/Avidin complex was verified by means of UV–vis spectroscopy. Different deposition cycles of avidin onto the PDA-BT coating by layer-by-layer assembly showed that the film retains its receptor binding capacity for at least eight consecutive cycles. Finally, the feasibility of PDA-BT coating to recognize cell lines with different grade of overexpression of biotin receptors (BR) was investigated by tumor cell capture experiments by using MCF-7 (BR+) and HL-60 (BR−) cell lines. The results show that the developed system can selectively capture MCF-7 cells indicating that it could represent a first approach for the development of future more sophisticated biosensors easily accessible, low cost and recyclable with the dual and rapid detection of both proteins and cells.

Wavy Graphene Nanoribbons Containing Periodic Eight-Membered Rings for Light-Emitting Electrochemical Cells.

Precision graphene nanoribbons (GNRs) offer distinctive physicochemical properties that are highly dependent on their geometric topologies, thereby holding great potential for applications in carbon-based optoelectronics and spintronics. While the edge structure and width control has been a popular strategy for engineering the optoelectronic properties of GNRs, non-hexagonal-ring-containing GNRs remain underexplored due to synthetic challenges, despite offering an equally high potential for tailored properties. Herein, we report the synthesis of a wavy GNR (wGNR) embedding periodic eight-membered rings into its carbon skeleton, which is achieved by the A2B2-type Diels-Alder polymerization between dibenzocyclooctadiyne (6) and dicyclopenta[e,l]pyrene-5,11-dione derivative (8), followed by a selective Scholl reaction of the obtained ladder-type polymer (LTP) precursor. The obtained wGNR, with a length of up to 30 nm, is thoroughly characterized by solid-state NMR, FT-IR, Raman, and UV-Vis spectroscopy with the support of DFT calculations. The non-planar geometry of wGNR efficiently prevents the inter-ribbon π-π aggregation, leading to photoluminescence in solution. Consequently, the wGNR can function as an emissive layer for organic light-emitting electrochemical cells (OLECs), offering a proof-of-concept exploration in implementing luminescent GNRs into optoelectronic devices. The fast-responding OLECs employing wGNR will pave the way for advancements in OLEC technology and other optoelectronic devices.

CaLi2PN3 - A Quaternary Chain-Type Nitridophosphate by Medium-Pressure Synthesis.

Nitridophosphates are in the focus of current research interest due to their structural versatility and properties, such as ion conductivity, ultra-incompressibility and luminescent properties when doped with suitable activator ions. Multinary representatives often require thorough investigation due to the competition with the thermodynamically more stable binary and ternary compounds. Another point of concern is the synthetic control of structural details, which is usually limited by conventional bottom-up syntheses. In this study, we report on the synthesis and characterization of the quaternary nitridophosphate CaLi2PN3. Various synthesis protocols were used for the preparation of CaLi2PN3, including the novel nitridophosphate double salt approach. The crystal structure was solved and refined from single-crystal X-ray diffraction data and confirmed by Rietveld refinement, solid-state NMR spectroscopy, EDX measurements and low-cost crystallographic calculations. The experimental results were corroborated by DFT calculations, which revealed the electronic band structure. Formation energy calculations allowed conclusions to be drawn about the stability in comparison to the initial ternary nitridophosphates. The synthesis of CaLi2PN3 exemplifies the enormous potential of medium-pressure syntheses in the field of nitridophosphate research. Furthermore, the presented new synthesis route allows a certain degree of structural control, which is a promising addition to previous synthesis strategies in nitridophosphate chemistry.

Correlating the structure of quinone-functionalized carbons with electrochemical CO2 capture performance

Electrochemical carbon dioxide capture is emerging as an energy-efficient alternative to traditional carbon capture technology. In particular, redox-active molecules that can capture carbon dioxide when electrochemically reduced and release carbon dioxide when electrochemically re-oxidized are under active development. To prepare a carbon capture device, these molecules can be incorporated into a solid electrode in a battery-like cell. In this work, we explore the scope of a recently developed method where anthraquinones are covalently attached to porous carbon supports to obtain electrodes for electrochemical carbon dioxide capture. We functionalize four different porous carbon materials with varying porosities and surface chemistries, and use gas sorption analysis and solid-state NMR spectroscopy to probe the location of the grafted anthraquinones. All four functionalized materials show electrochemically mediated capture and release of carbon dioxide, and we explore the factors that determine their performance. While the anthraquinone-functionalized mesoporous carbon, f-CMK-3, showed the highest quinone loading, it showed poor quinone utilization for CO2 capture and poor long-term cycling stability. In contrast, the predominantly microporous functionalized carbon, f-YP-80F, showed a higher quinone utilization and improved cycling stability. This work can guide the design of functionalized carbon electrodes for electrochemical carbon dioxide capture.

Composition and Structure of the solid electrolyte interphase on Na-Ion Anodes Revealed by Exo- and Endogenous Dynamic Nuclear Polarization─NMR Spectroscopy.

Sodium ion batteries (SIB) are among the most promising devices for large scale energy storage. Their stable and long-term performance depends on the formation of the solid electrolyte interphase (SEI), a nanosized, heterogeneous and disordered layer, formed due to degradation of the electrolyte at the anode surface. The chemical and structural properties of the SEI control the charge transfer process at the electrode-electrolyte interface, thus, there is great interest in determining these properties for understanding, and ultimately controlling, SEI functionality. However, the study of the SEI is notoriously challenging due to its heterogeneous nature and minute quantity. In this work, we present a powerful approach for probing the SEI based on solid state NMR spectroscopy with increased sensitivity from dynamic nuclear polarization (DNP). Utilizing exogenous (organic radicals) and endogenous (paramagnetic metal ion dopants) DNP sources, we obtain not only a detailed compositional map of the SEI but also, for the first time for the native SEI, determine the spatial distribution of its constituent phases. Using this approach, we perform a thorough investigation of the SEI formed on Li4Ti5O12 used as a SIB anode. We identify a compositional gradient, from organic phases at the electrolyte interface to inorganic phases toward the anode surface. We find that the use of fluoroethylene carbonate as an electrolyte additive leads to performance degradation which can be attributed to formation of a thicker SEI, rich in NaF and carbonates. We expect that this methodology can be extended to examine other titanate anodes and new electrolyte compositions, offering a unique tool for SEI investigations to enable the development of effective and long-lasting SIBs.

Nondissociative Activated Dihydrogen Binding on CeO2 Revealed by High-Pressure Operando Solid-State NMR Spectroscopy.

Dihydrogen complexes, which retain the H-H bond, have been extensively studied in molecular science and found to be prevalent in homogeneous and enzymatic catalysis. However, their counterparts in heterogeneous catalysis, specifically nondissociative chemisorbed dihydrogen binding on the catalyst surface, are rarely reported experimentally. This scarcity is due to the complexity of typical material surfaces and the lack of effective characterization techniques to prove and distinguish various dihydrogen binding modes. Herein, using high-pressure operando solid-state NMR technology, we report the first unambiguous experimental observation of activated dihydrogen binding on a reduced ceria catalyst through interactions with surface oxygen vacancies. By employing versatile NMR structural and dynamical analysis methods, we establish a proportional relationship between the degree of ceria surface reduction and dihydrogen binding, as evidenced by NMR observations of H-D through-bond coupling (JHD), T1 relaxation, and proton isotropic chemical shifts. In situ NMR analysis further reveals the participation of bound dihydrogen species in a room-temperature ethylene hydrogenation reaction. The remarkable similarities between surface-activated dihydrogen in heterogeneous catalysis and dihydrogen model molecular complexes can provide valuable insights into the hydrogenation mechanism for many other solid catalysts, potentially enhancing hydrogen utilization.

Determination of solid-state acidity of lyophilized trehalose containing citrate, phosphate, and histidine buffers using UV/VIS diffuse reflectance and solid-state NMR spectroscopy

Changes in the protonation state of lyophilized proteins can impact structural integrity, chemical stability, and propensity to aggregate upon reconstitution. When a buffer is chosen, the freezing/drying process may result in dramatic changes in the protonation state of the protein due to ionization shift of the buffer. In order to determine whether protonation shifts are occurring, ionizable probes can be added to the formulation. Optical probes (dyes) have shown dramatic ionization changes in lyophilized products, but it is unclear whether the pH indicator is uniform throughout the matrix and whether the change in the pH indicator actually mirrors drug ionization changes. In solid-state NMR (SSNMR) spectroscopy, the chemical shift of the carbonyl carbon in carboxylic acids is very sensitive to the ionization state of the acid. Therefore, SSNMR can be used to measure ionization changes in a lyophilized matrix by employing a small quantity of an isotopically-labeled carboxylic acid species in the formulation. This paper compares the apparent pH of six trehalose-containing lyophilized buffer systems using SSNMR and UV-Vis diffuse reflectance spectroscopy (UVDRS). Both SSNMR and UVDRS results using two different ionization probes (butyric acid and bromocresol purple, respectively) showed little change in apparent acidity compared to the pre-lyophilized solution in a sodium citrate buffer, but a greater change was observed in potassium phosphate, sodium phosphate, and histidine buffers. While the trends between the two methods were similar, there were differences in the numerical values of equivalent pH (pHeq) observed between the two methods. The potential causes contributing to the differences are discussed.

Resolving Atomic-Level Dynamics and Interactions of High-Molecular-Weight Hyaluronic Acid by Multidimensional Solid-State NMR.

High-molecular-weight (HMW) hyaluronic acid (HA) is a highly abundant natural polysaccharide and a fundamental component of the extracellular matrix (ECM). Its size and concentration regulate tissues' macro- and microenvironments, and its upregulation is a hallmark feature of certain tumors. Yet, the conformational dynamics of HMW-HA and how it engages with the components of the ECM microenvironment remain poorly understood at the molecular level. Probing the molecular structure and dynamics of HMW polysaccharides in a hydrated, physiological-like environment is crucial and also technically challenging. Here, we deploy advanced magic-angle spinning (MAS) solid-state NMR spectroscopy in combination with isotopic enrichment to enable an in-depth study of HMW-HA to address this challenge. This approach resolves multiple coexisting HA conformations and dynamics as a function of environmental conditions. By combining 13C-labeled HA with unlabeled ECM components, we detect by MAS NMR HA-specific changes in global and local conformational dynamics as a consequence of hydration and ECM interactions. These measurements reveal atom-specific variations in the dynamics and structure of the N-acetylglucosamine moiety of HA. We discuss possible implications for interactions that stabilize the structure of HMW-HA and facilitate its recognition by HA-binding proteins. The described methods apply similarly to the studies of the molecular structure and dynamics of HA in tumor contexts and in other biological tissues as well as HMW-HA hydrogels and nanoparticles used for biomedical and/or pharmaceutical applications.

Comparative Analysis of Polysaccharide and Cell Wall Structure in Aspergillus nidulans and Aspergillus fumigatus by Solid-State NMR.

Invasive aspergillosis poses a significant threat to immunocompromised patients, leading to high mortality rates associated with these infections. Targeting the biosynthesis of cell wall carbohydrates is a promising strategy for antifungal drug development and will be advanced by a molecular-level understanding of the native structures of polysaccharides within their cellular context. Solid-state NMR spectroscopy has recently provided detailed insights into the cell wall organization of Aspergillus fumigatus, but genetic and biochemical evidence highlights species-specific differences among Aspergillus species. In this study, we employed a combination of 13C, 15N, and 1H-detection solid-state NMR, supplemented by Dynamic Nuclear Polarization (DNP), to compare the structural organization of cell wall polymers and their assembly in the cell walls of A. fumigatus and A. nidulans, both of which are key model organisms and human pathogens. The two species exhibited a similar rigid core architecture, consisting of chitin, α-glucan, and β-glucan, which contributed to comparable cell wall properties, including polymer dynamics, water retention, and supramolecular organization. However, differences were observed in the chitin, galactosaminogalactan, protein, and lipid content, as well as in the dynamics of galactomannan and the structure of the glucan matrix.

HRMAS 1H NMR and CPMAS 13C NMR spectroscopies coupled with chemometrics for the metabolomic investigation of commercial teas

In this study, the metabolome of different types of tea (i.e., black, green and earl grey) is explored by means of HRMAS 1H (i.e., semisolid state) NMR and CPMAS 13C (i.e., solid state) NMR spectroscopies. By elaborating the metabolomic data with unsupervised and supervised chemometric tools (PCA, PLS-DA), it was possible to set up classification models with the aim to discriminate the different types of tea as based on differences in their chemical composition. Both the applications of the NMR spectroscopies also allowed to obtain information about the metabolic biomarkers leading the differentiation among teas. These were mainly represented by phenolic compounds. Also, some non-phenolic compounds, such as amino acids, carbohydrates, and terpenoids, played important roles in shaping tea quality. The findings of this study provided useful insights into the application of solid and semisolid state NMR spectroscopies, in combination with chemometrics, in the context of food authentication and traceability.

Multi-Scale Modeling and Simulation of All-Solid-State Sodium-Ion Batteries with Polymer-Ceramic Hybrid Electrolytes

Lithium-ion batteries (LIBs) have been widely considered as the most promising power source for mobile devices. However, LIBs cannot meet the increasing global demand for electrochemical energy storage in the foreseeable future. Sodium ion-batteries (SIBs) are based on more ecofriendly and earth-abandoned materials. Commonly researched SIBs are based on liquid electrolytes. They pose leakage and thermal runaway risks. Solid polymer electrolytes solve these problems but need to operate at temperatures between 60-80°C to compensate insufficient ionic conductivity of polymer electrolytes at ambient temperatures.We present a polymer-ceramic hybrid electrolyte which overcomes the necessity to operate at high temperatures. It combines the advantages of high ion-conducting solid ceramic particles and flexible polymers. Sodium metal serves as the anode and PEO with inorganic fillers is used as cathode electrolyte. Due to their sustainability and high efficiency —comparable to LIBs— sodium-ion batteries are a promising candidate for small scale stationary energy storage applications or mobile energy storage applications with less constrains regarding energy density (e.g. trains, ships, submarines etc.). This contribution highlights a modeling approach for simulations of a single battery cell to develop an optimal cell design of the aforementioned battery system. A newly developed multiscale modeling method for hybrid polymer-ceramic sodium ion batteries reflects the different length scales of the active particle level and the electrode level. We precisely describe the spatially resolved mass and charge transport as well as electrochemical reactions in the active particle and the surrounding electrolyte employing a finite volume method [1]. Both domains are resolved in 3D and the model framework was validated against experimental data. The model output is incorporated in the connected pseudo-two-dimensional battery model for fast simulations of the overall battery cell considering mass and charge transport. The results support the importance of particle (active particle and ceramic filler particle) properties and configurations as well as electrolyte composition. Based on this, we exploit an evolutionary algorithm to suggest optimized battery designs for different use cases. In Addition, we present the evaluation of electrolyte properties with solid-state NMR spectroscopy and their model implementation [2]. μCT imaging experimentally investigates the cathode half-cell morphology. The derived virtual reconstructions enable realistic microstructure simulations of the battery cells. In this presentation, we will suggest two cell designs: The high-energy cell optimizes material efficiency and energy density. The high-power cell opts for high power densities (fast charging).In summary, we present a novel all-solid-state polymer-ceramic hybrid sodium-ion battery type for small stationary or large mobile energy storage units. Our contribution outlines a simulation approach that sheds light on macroscopic and microscopic processes inside the battery-cell using a multiscale modeling method. As a result, a high-energy and a high-power design is derived. Gerbig, M. Holzapfel and H. Nirschl, J. Electrochem. Soc., 170(4), 40517 (2023).Moradipour, A. Markert, T. Rudszuck, N. Röttgen, G. Dück, M. Finsterbusch, F. Gerbig, H. Nirschl and G. Guthausen, J Energ Power Technol, 05(04), 1–21 (2023).

Manual and automatic assignment of two different Aβ40 amyloid fibril polymorphs using MAS solid-state NMR spectroscopy

Amyloid fibrils from Alzheimer’s amyloid-beta peptides (Aβ) are found to be polymorphic. So far, 14 Aβ40 fibril structures have been determined. The mechanism of why one particular protein sequence adopts so many different three-dimensional structures is yet not understood. In this work, we describe the assignment of the NMR chemical shifts of two Alzheimer’s disease fibril polymorphs, P1 and P2, which are formed by the amyloid-beta peptide Aβ40. The assignment is based on 13C-detected 3D NCACX and NCOCX experiments MAS solid-state NMR experiments. The fibril samples are prepared using an extensive seeding protocol in the absence and presence of the small heat shock protein αB-crystallin. In addition to manual assignments, we obtain chemical shift assignments using the automation software ARTINA. We present an analysis of the secondary chemical shifts and a discussion on the differences between the manual and automated assignment strategies.

Molecular Mechanism of P53 Peptide Permeation through Lipid Membranes from Solid-State NMR Spectroscopy and Molecular Dynamics Simulations.

Macrocyclic peptides show promise in targeting high-value therapeutically relevant binding sites due to their high affinity and specificity. However, their clinical application is often hindered by low membrane permeability, which limits their effectiveness against intracellular targets. Previous studies focused on peptide conformations in various solvents, leaving a gap in understanding their interactions with and translocation through lipid bilayers. Addressing this, our study explores the membrane interactions of stapled peptides, a subclass of macrocyclic peptides, using solid-state nuclear magnetic resonance (ssNMR) spectroscopy and molecular dynamics (MD) simulations. We conducted ssNMR measurements on ATSP-7041M, a prototypical stapled peptide, to understand its interaction with lipid membranes, leading to an MD-informed model for peptide membrane permeation. Our findings reveal that ATSP-7041M adopts a stable α-helical structure upon membrane binding, facilitated by a cation-π interaction between its phenylalanine side chain and the lipid headgroup. This interaction makes the membrane-bound state energetically favorable, facilitating membrane affinity and insertion. The bound peptide displayed asymmetric insertion depths, with the C-terminus penetrating deeper (approximately 9 Å) than the N-terminus (approximately 4.3 Å) relative to the lipid headgroups. Contrary to expectations, peptide dynamics was not hindered by membrane binding and exhibited rapid motions similar to cell-penetrating peptides. These dynamic interactions and peptide-lipid affinity appear to be crucial for membrane permeation. MD simulations indicated a thermodynamically stable transmembrane conformation of ATSP-7041M, reducing the energy barrier for translocation. Our study offers an in silico view of ATSP-7041M's translocation from the extracellular to the intracellular region, highlighting the significance of peptide-lipid interactions and dynamics in enabling peptide transit through membranes.

Synergistic effect of CaCO3 particles and porous carbon towards the removal of Zn2+ ions in aqueous solutions

This work describes the preparation of an adsorbent containing CaCO3 particles dispersed in activated carbon and its use for the removal of Zn2+ ions from aqueous solutions. The combination of the large porosity of the activated carbon support with the easy ion exchange occurring at the surface of the carbonate particles led to the achievement of fast adsorption kinetics and excellent ion removal capacity for the composite adsorbent. The material was synthesized by wet impregnation of the porous carbon support with an aqueous solution of Ca(NO3)2, followed by evaporation of the solvent with subsequent heat treatment in an inert atmosphere. X-ray diffraction results demonstrated the presence of CaCO3 crystals in the material, but with broad and low intensity diffraction peaks, corresponding to an average crystallite size of 20 nm; solid-state 13C NMR spectroscopy confirmed the presence of this phase by means of the identification of the signal relative to the 13C nuclei of the CO32− group at ∼170 ppm. The carbon-based adsorbent containing the CaCO3 particles showed excellent ability to remove Zn2+ ions from aqueous solutions, with essentially all ions removed after 30 min of contact time. In addition, the kinetic analysis data were properly fitted using the pseudo-second order model, pointing to the occurrence of chemisorption as the rate limiting of the process. The equilibrium adsorption isotherms were correctly described by the Langmuir model, indicating that the adsorption takes place with the formation of a monolayer on the adsorbent surface. The results evidenced a synergistic effect of the porous carbon and the CaCO3 particles regarding the Zn2+ ions removal, with a fast adsorption kinetics at the initial stage of adsorption attributed to the high availability of the dispersed CaCO3 particles on the carbon surface.

From Chalcogen Bonding to S-π Interactions in Hybrid Perovskite Photovoltaics.

The stability of hybrid organic-inorganic halide perovskite semiconductors remains a significant obstacle to their application in photovoltaics. To this end, the use of low-dimensional (LD) perovskites, which incorporate hydrophobic organic moieties, provides an effective strategy to improve their stability, yet often at the expense of their performance. To address this limitation, supramolecular engineering of noncovalent interactions between organic and inorganic components has shown potential by relying on hydrogen bonding and conventional van der Waals interactions. Here, the capacity to access novel LDperovskite structures that uniquely assemble through unorthodox S-mediated interactions is explored by incorporating benzothiadiazole-based moieties. The formation of S-mediated LD structures is demonstrated, including one-dimensional (1D) and layered two-dimensional (2D) perovskite phases assembled via chalcogen bonding and S-π interactions. This involved a combination of techniques, such as single crystal and thin film X-ray diffraction, as well as solid-state NMR spectroscopy, complemented by molecular dynamics simulations, density functional theory calculations, and optoelectronic characterization, revealing superior conductivities of S-mediated LD perovskites. The resulting materials are applied in n-i-p and p-i-n perovskite solar cells, demonstrating enhancements in performance and operational stability that reveal a versatile supramolecular strategy in photovoltaics.