Solar Thermophotovoltaic System Research Articles

Unidirectional radiative heat transfer with a spectrally selective planar absorber/emitter for high-efficiency solar thermophotovoltaic systems

A high-efficiency solar thermophotovoltaic (STPV) system has been demonstrated using spectrally selective planar absorber/emitter systems and a GaSb TPV cell. In this study, a novel approach for designing the STPV system based on the efficiency of unidirectional radiative heat transfer has been introduced. To achieve high extraction and photovoltaic conversion efficiencies, the spectrally selective absorber/emitter based on a coherent perfect absorber composed of a thin molybdenum layer sandwiched between hafnium layers was applied. The extraction efficiency was further investigated with respect to the absorber/emitter area ratio. The experimental efficiency of STPV reached 5.1% with the area ratio of 2.3.

Parametric characteristics of a solar thermophotovoltaic system at the maximum efficiency

A model of the solar thermophotovoltaic system (STPVS) consisting of an optical concentrator, a thermal absorber, an emitter, and a photovoltaic (PV) cell is proposed, where the far-field thermal emission between the emitter and the PV cell, the radiation losses from the absorber and emitter to the environment, the reflected loss from the absorber, and the finite-rate heat exchange between the PV cell and the environment are taken into account. Analytical expressions for the power output of and overall efficiency of the STPVS are derived. By solving thermal equilibrium equations, the operating temperatures of the emitter and PV cell are determined and the maximum efficiency of the system is calculated numerically for given values of the output voltage of the PV cell and the ratio of the front surface area of the absorber to that of the emitter. For different bandgaps, the maximum efficiencies of the system are calculated and the corresponding optimum values of several operating parameters are obtained. The effects of the concentrator factor on the optimum performance of the system are also discussed.

Solar thermophotovoltaics: reshaping the solar spectrum

AbstractRecently, there has been increasing interest in utilizing solar thermophotovoltaics (STPV) to convert sunlight into electricity, given their potential to exceed the Shockley-Queisser limit. Encouragingly, there have also been several recent demonstrations of improved system-level efficiency as high as 6.2%. In this work, we review prior work in the field, with particular emphasis on the role of several key principles in their experimental operation, performance, and reliability. In particular, for the problem of designing selective solar absorbers, we consider the trade-off between solar absorption and thermal losses, particularly radiative and convective mechanisms. For the selective thermal emitters, we consider the tradeoff between emission at critical wavelengths and parasitic losses. Then for the thermophotovoltaic (TPV) diodes, we consider the trade-off between increasing the potential short-circuit current, and maintaining a reasonable opencircuit voltage. This treatment parallels the historic development of the field, but also connects early insights with recent developments in adjacent fields.With these various components connecting in multiple ways, a system-level end-to-end modeling approach is necessary for a comprehensive understanding and appropriate improvement of STPV systems. This approach will ultimately allow researchers to design STPV systems capable of exceeding recently demonstrated efficiency values.

Performance analysis of solar thermophotovoltaic conversion enhanced by selective metamaterial absorbers and emitters

By converting broadband sunlight into narrowband thermal radiation matched to the bandgap of thermophotovoltaic (TPV) cells, solar thermophotovoltaic (STPV) systems could potentially reach a high conversion efficiency far exceeding the Shockley–Queisser limit. However, actual STPV systems exhibit much lower efficiency due to non-idealities in solar absorbers, thermal emitters and TPV cells. In this work, the STPV system with selective metamaterial solar absorber and emitter is investigated, whose conversion efficiency is between 8% and 10% with concentration factor varying between 20 and 200. This conversion efficiency is remarkably enhanced compared with the conversion efficiency of less than 2.5% for the STPV system employing black absorbers and emitters. The sidewall emission losses from the absorber–emitter module and the non-unity view factor between the thermal emitter and TPV cell will diminish the performance of the STPV system, whose effects are also quantitatively discussed in this work. Furthermore, the non-planar STPV systems with larger emitter–absorber area ratios are investigated, whose conversion efficiency can reach up to 12.6% under 200 suns when the emitter is four times as large as the absorber.

A checkerboard selective absorber with excellent spectral selectivity

A selective absorber with excellent spectral selectivity is proposed and analyzed. The absorber is based on a germanium (Ge) checkerboard on top of a tantalum (Ta) substrate. At wavelengths shorter than the 1.2 μm cutoff, a very high absorption is achieved due to strong cavity resonances in the Ge nanosquares, and their interactions with adjacent nanocavities and the bottom Ta substrate. At longer wavelengths, absorption is greatly suppressed due to destructive interference between the transparent checkerboard layer and the highly reflective Ta substrate. To better describe the superior selectivity of our configuration, a new figure of merit (FOM) is introduced. We observe a FOM value of 0.88 compared to 0.69 for its planar counterpart. We also conduct a thermal analysis to verify the excellent selectivity of our absorber. A high temperature can be achieved and maintained, promising good potential for applications in solar thermophotovoltaic systems.

Titanium-nitride-based integrated plasmonic absorber/emitter for solar thermophotovoltaic application

Titanium nitride (TiN) as a refractory plasmonic material is proposed to be used as an angle-insensitive integrated broadband solar absorber and narrowband near-infrared (NIR) emitter for solar thermo-photovoltaic (STPV) application. By constructing TiN-nanopatterns/dielectric/TiN stack metamaterial, approximately 93% light absorption in a wavelength range of 0.3–0.9 μm and near unit narrowband (Δλ/λ∼0.3) emission in NIR (∼2 μm) were demonstrated by numerical simulation. Keeping the excellent light absorption in the visible band, the emission wavelength can be easily tuned by patterning the top TiN layer into various subwavelength structures. This dual function attributes to the intrinsic absorption and plasmonic property of TiN. In such an integrated structure, broadband absorption and narrowband emission need to be balanced for an optimized power efficiency conversion. Detailed analysis has demonstrated that the STPV system based on this integrated absorber/emitter can exceed the Shockley–Queisser limit at 1000 K.

Nanoengineered Surfaces for Thermal Energy Conversion

We provide an overview of the impact of using nanostructured surfaces to improve the performance of solar thermophotovoltaic (STPV) energy conversion and condensation systems. We demonstrated STPV system efficiencies of up to 3.2%, compared to ≤1% reported in the literature, made possible by nanophotonic engineering of the absorber and emitter. For condensation systems, we showed enhanced performance by using scalable superhydrophobic nanostructures via jumping-droplet condensation. Furthermore, we observed that these jumping droplets carry a residual charge which causes the droplets to repel each other mid-flight. Based on this finding of droplet residual charge, we demonstrated electric-field-enhanced condensation and jumping-droplet electrostatic energy harvesting.

Solar thermophotovoltaic system using nanostructures.

This paper presents results on a highly efficient experimental solar thermophotovoltaic (STPV) system using simulated solar energy. An overall power conversion efficiency of 6.2% was recorded under solar simulation. This was matched with a thermodynamic model, and the losses within the system, as well as a path forward to mitigate these losses, have been investigated. The system consists of a planar, tungsten absorbing/emitting structure with an anti-reflection layer coated laser-microtextured absorbing surface and single-layer dielectric coated emitting surface. A GaSb PV cell was used to capture the emitted radiation and convert it into electrical energy. This simple structure is both easy to fabricate and temperature stable, and contains no moving parts or heat exchange fluids.

Sunlight Absorption Engineering for Thermophotovoltaics: Contributions from the Optical Design

Nowadays, solar thermophotovoltaic systems constitute a platform in which sophisticated optical material designs are put into practice with the aim of achieving the long sought after dream of developing an efficient energy conversion device based on this concept. Recent advances demonstrate that higher efficiencies are at reach using photonic nanostructures amenable to mass production and scale-up.

High-efficiency solar-thermophotovoltaic system equipped with a monolithic planar selective absorber/emitter

We demonstrate a high-efficiency solar-thermophotovoltaic system (STPV) using a monolithic, planar, and spectrally selective absorber/emitter. A complete STPV system using gallium antimonide (GaSb) cells was designed and fabricated to conduct power generation tests. To produce a high-efficiency STPV, it is important to match the thermal radiation spectrum with the sensitive region of the GaSb cells. Therefore, to reach high temperatures with low incident power, a planar absorber/emitter is incorporated for controlling the thermal radiation spectrum. This multilayer coating consists of thin-film tungsten sandwiched by yttria-stabilized zirconia. The system efficiency is estimated to be 16% when accounting for the optical properties of the fabricated absorber/emitter. Power generation tests using a high-concentration solar simulator show that the absorber/emitter temperature peaks at 1640 K with an incident power density of 45 W/cm2, which can be easily obtained by low-cost optics such as Fresnel lenses. The conversion efficiency became 23%, exceeding the Shockley–Queisser limit for GaSb, with a bandgap of 0.67 eV. Furthermore, a total system efficiency of 8% was obtained with the view factor between the emitter and the cell assumed to be 1.

Superlattice photonic crystal as broadband solar absorber for high temperature operation.

A high performance solar absorber using a 2D tantalum superlattice photonic crystal (PhC) is proposed and its design is optimized for high-temperature energy conversion. In contrast to the simple lattice PhC, which is limited by diffraction in the short wavelength range, the superlattice PhC achieves solar absorption over broadband spectral range due to the contribution from two superposed lattices with different cavity radii. The superlattice PhC geometry is tailored to achieve maximum thermal transfer efficiency for a low concentration system of 250 suns at 1500 K reaching 85.0% solar absorptivity. In the high concentration case of 1000 suns, the superlattice PhC absorber achieves a solar absorptivity of 96.2% and a thermal transfer efficiency of 82.9% at 1500 K, amounting to an improvement of 10% and 5%, respectively, versus the simple square lattice PhC absorber. In addition, the performance of the superlattice PhC absorber is studied in a solar thermophotovoltaic system which is optimized to minimize absorber re-emission by reducing the absorber-to-emitter area ratio and using a highly reflective silver aperture.

Graded-index structures for high-efficiency solar thermophotovoltaic emitting surfaces.

This Letter presents a highly efficient emitter structure for solar thermophotovoltaic systems. The structure consists of a graded index on tungsten, shows a spectral efficiency of 59%, or 70% with the use of a back reflector, and is compared to other state-of-the-art emitter structures. The effects of different structures and periodicities on the efficiency of the emitter are explored, as well as the effect of a protective oxide coating. The causes of the antireflection properties of these structures are also explored.

Night time performance of a storage integrated solar thermophotovoltaic (SISTPV) system

Energy storage at low maintenance cost is one of the key challenges for generating electricity from the solar energy. This paper presents the theoretical analysis (verified by CFD) of the night time performance of a recently proposed conceptual system that integrates thermal storage (via phase change materials) and thermophotovoltaics for power generation. These storage integrated solar thermophotovoltaic (SISTPV) systems are attractive owing to their simple design (no moving parts) and modularity compared to conventional Concentrated Solar Power (CSP) technologies. Importantly, the ability of high temperature operation of these systems allows the use of silicon (melting point of 1680K) as the phase change material (PCM). Silicon’s very high latent heat of fusion of 1800kJ/kg and low cost ($1.70/kg), makes it an ideal heat storage medium enabling for an extremely high storage energy density and low weight modular systems. In this paper, the night time operation of the SISTPV system optimised for steady state is analysed. The results indicate that for any given PCM length, a combination of small taper ratio and large inlet hole-to-absorber area ratio are essential to increase the operation time and the average power produced during the night time. Additionally, the overall results show that there is a trade-off between running time and the average power produced during the night time. Average night time power densities as high as 30W/cm2 are possible if the system is designed with a small PCM length (10cm) to operate just a few hours after sun-set, but running times longer than 72h (3days) are possible for larger lengths (50cm) at the expense of a lower average power density of about 14W/cm2. In both cases the steady state system efficiency has been predicted to be about 30%. This makes SISTPV systems to be a versatile solution that can be adapted for operation in a broad range of locations with different climate conditions, even being used off-grid and in space applications.

Metallic Photonic Crystal Absorber‐Emitter for Efficient Spectral Control in High‐Temperature Solar Thermophotovoltaics

A high‐temperature stable solar absorber based on a metallic 2D photonic crystal (PhC) with high and tunable spectral selectivity is demonstrated and optimized for a range of operating temperatures and irradiances. In particular, a PhC absorber with solar absorptance 0.86 and thermal emittance = 0.26 at 1000 K, using high‐temperature material properties, is achieved resulting in a thermal transfer efficiency more than 50% higher than that of a blackbody absorber. Furthermore, an integrated double‐sided 2D PhC absorber/emitter pair is demonstrated for a high‐performance solar thermophotovoltaic (STPV) system. The 2D PhC absorber/emitter is fabricated on a double‐side polished tantalum substrate, characterized, and tested in an experimental STPV setup along with a flat Ta absorber and a nearly blackbody absorber composed of an array of multiwalled carbon nanotubes (MWNTs). At an irradiance of 130 kW m−2 the PhC absorber enables more than a two‐fold improvement in measured STPV system efficiency (3.74%) relative to the nearly blackbody absorber (1.60%) and higher efficiencies are expected with increasing operating temperature. These experimental results show unprecedented high efficiency, demonstrating the importance of the high selectivity of the 2D PhC absorber and emitter for high‐temperature energy conversion.

An alternative 'Sun' for solar cells

Nanophotonic structures can be used to engineer efficient solar thermophotovoltaic systems.

Solar thermophotovoltaic energy conversion systems with two-dimensional tantalum photonic crystal absorbers and emitters

Solar thermophotovoltaic (STPV) systems convert solar energy into electricity via thermally radiated photons at tailored wavelengths to increase energy conversion efficiency. In this work, we report the design and analysis of a STPV system with 2D photonic crystals (PhCs) using a high-fidelity thermal-electrical hybrid model that includes the thermal coupling between the absorber/emitter/PV cell and accounts for non-idealities such as temperature gradients and parasitic thermal losses. The desired radiative spectra of the absorber and emitter were achieved by utilizing an optimized two-dimensional periodic square array of cylindrical cavities on a tantalum (Ta) substrate. Various energy loss mechanisms including re-emission at the absorber, low energy emission at the emitter, and a decrease in the emittance due to the angular dependence of PhCs were investigated with varying irradiation flux onto the absorber and resulting operating temperature. The modeling results suggest that the absorber-to-electrical efficiency of a realistic planar STPV consisting of a 2D Ta PhC absorber/emitter and current state of the art InGaAsSb PV cell (whose efficiency is only ~50% of the thermodynamic limit) with a tandem filter can be as high as ~10% at an irradiation flux of ~130kW/m2 and emitter temperature ~1400K. The absorber-to-electrical STPV efficiency can be improved up to ~16% by eliminating optical and electrical non-idealities in the PV cell. The high spectral performance of the optimized 2D Ta PhCs allows a compact system design and operation of STPVs at a significantly lower optical concentration level compared with previous STPVs using macro-scale metallic cavity receivers. This work demonstrates the importance of photon engineering for the development of high efficiency STPVs and offers a framework to improve the performance of both PhC absorbers/emitters and overall STPV systems.

Spectrally Controlled Thermal Radiation Based on Surface Microstructures for High-efficiency Solar Thermophotovoltaic System

Thermophotovoltaic (TPV) system is expected to generate electrical power from various heat sources. One of the key devices of TPV system is spectrally control thermal emitters. The performance is not sufficient to achieve high efficient TPV systems. In this study, we developed new type spectral selective emitters with closed-end surface microcavity array. The simulated spectral thermal radiation band width is only 70nm and Q-value=26.4. This Q-value is 5 times larger than the conventional open-end microcavity emitters. The design of Solar-TPV system which is driven by concentrated solar energy using refractory metal emitters with multi-layer coating. The estimated system efficiency and electric power density using the experimentally obtained spectral property of the selective emitters is 16.6% and 2.9W/cm2, respectively.

Conversion of broadband energy to narrowband emission through double-sided metamaterials

In this paper, an energy harvesting/re-radiating device is proposed to realize high efficiency energy conversion in the solar thermo-photovoltaic system. Such device consists of double-sided metamaterials which are assembled by a broadband absorber working in the major solar spectrum, and a back-by-back narrowband emitter working in the infrared band. It is theoretically proved that most of solar light (from 0.28 μm to 4 μm) can be collected, and then, converted to a sharp emission at the maximal response energy level (~0.4 eV) of photovoltaic cells in thermal equilibrium state. The impact of high temperature (as large as 966 K) and the parasitic radiation on the performance is discussed and compensated by geometric optimization.

Steady state analysis of a storage integrated solar thermophotovoltaic (SISTPV) system

This paper presents the theoretical analysis of a storage integrated solar thermophotovoltaic (SISTPV) system operating in steady state. These systems combine thermophotovoltaic (TPV) technology and high temperature thermal storage phase-change materials (PCM) in the same unit, providing a great potential in terms of efficiency, cost reduction and storage energy density. The main attraction in the proposed system is its simplicity and modularity compared to conventional Concentrated Solar Power (CSP) technologies. This is mainly due to the absence of moving parts. In this paper we analyze the use of Silicon as the phase change material (PCM). Silicon is an excellent candidate because of its high melting point (1680K) and its very high latent heat of fusion of 1800kJ/kg, which is about ten times greater than the conventional PCMs like molten salts. For a simple system configuration, we have demonstrated that overall conversion efficiencies up to ∼35% are approachable. Although higher efficiencies are expected by incorporating more advanced devices like multijunction TPV cells, narrow band selective emitters or adopting near-field TPV configurations as well as by enhancing the convective/conductive heat transfer within the PCM. In this paper, we also discuss about the optimum system configurations and provide the general guidelines for designing these systems. Preliminary estimates of night time operations indicate it is possible to achieve over 10h of operation with a relatively small quantity of Silicon.

Solar-Powered Microwave Transmission for Remote Sensing and Communications

A solar-powered microwave transmission system is proposed for remote sensing and communications purposes. We present in this paper a proof of concept to operate solar-powered microwave transmission and an investigation of microwave interactions with atmospheric plasmas. In this conceptualized system, a solar thermophotovoltaic system is considered to produce direct current electricity, which is then used to power solid-state microwave transmitters. The results from these simulations provide insights on how to produce an economically and environmentally conscientious energy source, which can be used for remote-sensing and communication applications. However, it is expected that microwaves may interact with ionospheric plasmas, primarily in the <i xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">E</i> -region to induce large-scale fluctuations in plasma density and geomagnetic fields with threshold wave electric-field intensities of ~ 1 V/m. After we determine the instability thresholds, we can use them to set up the safe operation range of solar-powered microwave transmission.