Solar Energy Harvesting Devices Research Articles

Design and optimization of broadband near-perfect absorber based on transition metal nitrides thin-films for solar energy harvesting

Broadband metamaterial absorbers hold promise for solar energy harvesting, but their complex designs and use of expensive noble metals hinder scalability and thermal stability. Additionally, traditional design methods are time-consuming. We propose a novel approach that combines a genetic algorithm with the transfer matrix method to optimize both material composition and layer structure for large-scale, cost-effective, and thermally stable solar absorbers. This method enables the design of near-perfect absorbers with an average absorptance exceeding 90 % and over 80 % across a broad wavelength range (0.3–2.5 μm) within the key solar spectrum. By optimizing the arrangement of metal and insulator layers using nitride materials (e.g., vanadium nitride), we achieve superior performance compared to traditional metal–insulator and insulator–metal structures. This optimization utilizes resonant absorption and the inherent absorption of metal layers. Our work paves the way for efficient and scalable solar energy harvesting devices.

The Advancement of Artificial Intelligence's Application in Hybrid Solar and Wind Power Plant Optimization: A Study of the Literature

The harnessing of solar, wind, and hydroelectric energy sources has rendered them easily accessible renewable resources, owing to their abundant availability. There is a growing body of research evincing interest in the deployment of hybrid renewable energy systems. Over recent decades, adopting hybrid technologies has engendered a positive trend, marked by broader considerations of configurations and applications within these systems. This study analytically examines the potential of hybrid solar and wind energy harvesting devices. As such, the project aims to extensively evaluate relevant literature and statistical analysis of data extracted from journal papers published between 2004 and 2023. A specific objective is to develop a complete database matrix surrounding multiple categories, including component configurations, methodological approaches, and supporting software infrastructures. Moreover, an assessment of the socio-economic, environmental, and ecological impacts of these systems is undertaken to ascertain their salience. Furthermore, this inquiry delves into the optimization strategies of these systems leveraging artificial intelligence methodologies. Critical lacunae identified during this review pertain to more emphasis on optimization metrics for PV-wind hybrid energy systems, impeding a holistic understanding of their implications on energy, economics, environment, and society. Our findings underscore prevalent methodologies such as computational modelling utilizing software suites like MATLAB/Simulink, HOMER, and others to derive empirical data. Additionally, parametric analyses emerge as the predominant approach, characterized by the application of algorithms such as Particle Swarm Optimization (PSO), Fuzzy Logic Control (FLC), and Genetic Algorithms (GA), among others. PV-wind hybrid energy systems are classified into autonomous and grid-interconnected configurations, with primary components comprising PV-wind generators. The anticipated trajectory suggests a burgeoning development of these hybrid energy harvesting systems, underpinned by their potential as clean, sustainable, and eco-friendly energy sources.

Enhancing red-light emission of CsPb(Br/I)3 quantum dots through noble metal nanostructure-mediated localized surface plasmon resonance

The luminescence properties of perovskite quantum dots are crucial for their applications in various optoelectronic devices. Enhancing the luminescence performance of CsPb(Br/I)3 quantum dots is a critical challenge for their application in optoelectronic devices. This paper explores the use of noble metal nanostructures to improve the luminescence intensity of these quantum dots through localized surface plasmon resonance (LSPR). We conducted electric field simulations to optimize the LSPR effect and prepared Au@Ag@SiO2 nanobipyramids with tailored LSPR peaks. The nanobipyramids were then connected to CsPbCl2Br, CsPbBr3, and CsPbBrI2 quantum dots using amine-functionalized SiO2 layers, forming a nanocomposite that showed a significant increase in luminescence. The study identifies the importance of the SiO2 spacer layer in preventing luminescence quenching and demonstrates that the LSPR effect can be harnessed to achieve up to a 15-fold enhancement in luminescence intensity. This research provides a promising avenue for advancing the efficiency of solar energy harvesting devices, light-emitting devices, and optical detectors.

Advancing Energy Sustainability Through Solar-to-Fuel Technologies: From Materials to Devices and Systems.

To achieve carbon neutrality and sustainable development, innovative solar-to-fuel systems have been designed through the integration of solar energy harvesting and electrochemical devices. Over the last decade, there have been notable advancements in enhancing the efficiency and durability of these solar-to-fuel systems. Despite the advancements, there remains significant potential for further improvements in the performance of systems. Enhancements can be achieved by optimizing electrochemical catalysts, advancing the manufacturing technologies of photovoltaics and electrochemical cells, and refining the overall design of these systems. In the realm of catalyst optimization, the effectiveness of materials can be significantly improved through active site engineering and strategic use of functional groups. Similarly, the performance of electrochemical devices can be enhanced by incorporating specific additives into electrolytes and optimizing gas diffusion electrodes. Improvements in solar harvesting devices are achievable through efficient passivant and self-assembled monolayers, which enhance the overall quality and efficiency of these systems. Additionally, optimizing the energy conversion efficiency involves the strategic use of DC converters, photoelectrodes, and redox media. This review aims to provide a comprehensive overview of the advancements in solar-powered electrochemical energy conversion systems, laying a solid foundation for future research and development in the field of energy sustainability.

Przykłady Małej Architektury w oparciu o System Arm-Z

Arm-Z is a conceptual hyperredundant robotic manipulator composed on linearly joined number of identical modules. Each of them has one-degree-of-freedom (1-DOF) – the relative twist. Since modules are congruent, Arm-Z presents potential economical advantages and enhanced robustness. The modules can be mass produced and easily replaceable. The control of Arm-Z, however, is difficult and not intuitive. Therefore it most often requires the use of computational intelligence techniques. This article presents selected concepts for kinetic street furniture based on Arm-Z: a helical column of adjustable height, a sun tracking shade or solar energy harvesting device, bio-mimicing sculpture, sprinkler or fountain. All these ideas are based on low-tech approach. For this purpose, the initial unit in the chain is fixed to the solid foundation. For simplicity, the drive is applied directly to the first unit and transferred by the means of internal gears to the following modules. All of them are equipped with a set of cylindrical and bevel gears with straight teeth with involute profile (for connecting the modules).

Unveiling the molecular symphony - A DFT exploration of structure, electronic dynamics, and excited state electron transfer in D-π-A systems, enhanced by TeO2@GQD multi-junctions for solar energy conversion in DSSC

Graphene and graphene-derived materials have sparked a lot of interest because of their unique physico-chemical features, that have positioned graphene as a promising material for future opto-electronics, and energy-harvesting devices. Graphene possesses outstanding mechanical characteristics and chemical inertness, as well as great mobility and optical transparency. Single-layer graphene has a high optical transmissivity that allows it to pass through a wide variety of light wavelengths, making it a popular material for optically conducting windows. Graphene-based metal and metal oxide nanocomposites require substantial investigations to understand the fundamental interactions between nanostructures and the graphene surface in DSSC, for understanding the characteristic features of such nanocomposites. In the present study different donor-π-acceptor, systems were used, which are different in the type of the π –spacer units only. This D-π-A system was then decorated on a (TiO2)9 semiconductor leading to shifting of the absorption wavelength, the absorbed wavelength was further shifted upon interaction with tellurium–oxide@graphene, thereby exploring its application in solar energy harvesting devices. The result of such substitution was assessed in terms of various parameters such as highest occupied molecular orbital (HOMO), least unoccupied molecular orbital (LUMO), energy gap (Egap), maximum wavelength (λmax), the free energy of electron injection efficiency (ΔGinject), open-circuit voltage (Voc), reorganization energy (Δreorg), etc by the DFT method with Gaussian 09 set of codes. The study can prove beneficial for understanding the mechanism of high optical absorption over a broad spectrum in such multijunction systems, the feature which makes them promising materials for efficient optical, electronic, and light-harvesting devices.

DFT aided comparative screening of mechanical, optoelectronic, and transport properties of double perovskites Cs2ScAuX6 (X = Cl, Br, and I) for green energy applications

A comprehensive comparative analysis has been performed to investigate the Cs2ScAuX6 (X = Cl, Br, and I) employing density functional theory. The WIEN2k code has been applied to optimize the structural arrangement of perovskites and calculate various aspects such as mechanical, optoelectronic, and transport characteristics. The results demonstrated that these perovskite compounds had both structural and chemical stability. The analyzed elastic characteristics of the Cs2ScAuX6 have shown that these compounds are mechanically stable, have anisotropy toughness, and provide durability against plastic deformation. The electronic characteristics are determined precisely and accurately using the Trans-Blaha-modified Becke-Johnson (TB-mBJ) potential. The compounds Cs2ScAuCl6, Cs2ScAuBr6, and Cs2ScAuI6 are semiconductors and have band gaps of 1.6, 1.5, and 1.05 eV, respectively, demonstrating an indirect nature. An investigation examines the optical characteristics within the energy range of 0–6 eV. The chosen materials reveal transparency in the lower energy spectrum of incoming photons and exhibit significant absorption and transmission of light. Therefore, it can be inferred that Cs2ScAuX6 materials possess optical properties that make them suitable for utilization in photovoltaic devices. Further, these materials elaborate substantial electrical conductivity, power factors, and figures of merit (ZT), making them efficient thermoelectric resources. At last, these results would be advantageous for experimental researchers and have also unveiled the substantial capability of these substances to be utilized in solar energy harvesting and thermoelectric devices.

Enhancing bio-photovoltaic cell efficiency: A study in transport property

Recently, bio-solar cells have garnered significant attention owing to their relatively high efficiency and cost-effectiveness, positioning them as alternative devices for solar energy harvesting. This study delves into the optical and electrical transport characteristics of a novel bilayer bio-solar cell using the total system transfer matrix method, theoretically. These bilayer bio-solar cells consist of two distinct layers of Chlorophyll-a and Chlorophyll-b, forming a heterojunction in the bio-solar cell architecture. Within these solar cells, photon absorption by the active layers of chlorophyll generates excitons and quasi-particles (bound electron and hole pairs), which subsequently diffuse through the collecting layer, resulting in significant recombination losses. The influence of the thickness of chlorophyll adsorbent active layers on the short circuit current density and quantum efficiency is examined through numerical calculations. Furthermore, we develop models for the solar cell parameters of thin film heterojunction photovoltaic devices based on Chlorophyll-a/Chlorophyll-b. The results indicate efficient short circuit current and quantum efficiency values (or power conversion efficiency) of 72 A/m2 and 3.30 %, respectively. It is demonstrated that optimizing the thickness of bio-solar cells based on these findings may enhance electron transport, leading to higher photocurrents and improved overall efficiency. These simulation outcomes pave the way for optimizing the thickness of bio-solar cells and advancing towards higher efficiencies.

Near-IR Capturing N-Methylbenzene Sulfonamide-Phenothiazine Incorporating Strong Electron Acceptor Push-Pull Systems: Photochemical Ultrafast Carrier Dynamics.

Unraveling the intriguing aspects of the intramolecular charge transfer (ICT) phenomenon of multi-modular donor-acceptor-based push-pull systems are of paramount importance considering their promising applications, particularly in solar energy harvesting and light-emitting devices. Herein, a series of symmetrical and unsymmetrical donor-acceptor chromophores 1-6, are designed and synthesized by the Corey-Fuchs reaction via Evano's condition followed by [2+2] cycloaddition retroelectrocyclic ring-opening reaction with strong electron acceptors TCNE and TCNQ in good yields (~60-85 %). The photophysical, electrochemical, and computational studies are investigated to explore the effect of incorporation of strong electron acceptors 1,1,4,4-tetracyanobuta-1,3-diene (TCBD) and dicyanoquinodimethane (DCNQ) with phenothiazine (PTZ) donor. An additional low-lying broad absorption band extended towards the near-infrared (NIR) region suggests charge polarization after the introduction of the electron acceptors in both symmetrical and asymmetrical systems, leading to such strong ICT bands. The electrochemical properties reveal that reduction potentials of 3 and 6 are lower than those of 2 and 5, suggesting DCNQ imparts more on the electronic properties and hence largely contributes to the stabilization of LUMO energy levels than TCBD, in line with theoretical observations. Relative positions of the frontier orbitals on geometry-optimized structures further support accessing donor-acceptor sites responsible for the ICT transitions. Eventually, ultrafast carrier dynamics of the photoinduced species are investigated by femtosecond transient absorption studies to identify their spectral characteristics and target analysis further provides information about different excited states photophysical events including ICT and their associated time profiles. The key findings obtained here related to excited state dynamical processes of these newly synthesized systems are believed to be significant in advancing their prospect of utilization in solar energy conversion and related photonic applications.

Interfacial Electronic States of GeC/g-C3N4 van der Waal Heterostructure with Promising Photocatalytic Activity via Hydrogenation.

The bandgap of most known two-dimensional materials can be tuned by hydrogenation, although certain 2D materials lack a sufficient wide bandgap. Currently, it would be perfect to design non-toxic, low-cost, and high-performance photocatalysts for photocatalytic water splitting via hydrogenation. We systematically examine the impact of hydrogenation on the optical and electronic characteristics of GeC/g-C3N4 vdW heterostructures (vdWHs) with four different stacking patterns using first-principles calculations. The phonon spectra, interlayer distance, binding energies and ab initio molecular dynamics calculations show the kinetic, mechanical, and thermal stability of GeC/g-C3N4 vdWH after hydrogenation at 300, 500 and 800 K and possesses anisotropic Poisson's ratio, Young's and bulk modulus, suggesting that it's a promising candidate for experimental fabrication. According to an investigation of its electronic properties, GeC/g-C3N4 vdWH has a bandgap of 1.28 eV, but hydrogenation dramatically increases it to 2.47 eV. As a result of interface-induced electronic doping, the electronic states in g-C3N4 might be significantly adjusted by coming into contact with hydrogenated GeC sheets. The vdWH exhibits a type-II semiconductor, which can enhance the spatial separation of electron-hole pairs and has a strong red-shift of absorption coefficient than those of the constituent monolayers. The high potential drop caused by the significant valence and conduction band offsets effectively separated the charge carriers. The absorption coefficient of GeCH2/g-C3N4 vdWH is highly influenced by a biaxial compressive strain more than the biaxial tensile strain. Our theoretical research implies that the hydrogenated GeCH2/g-C3N4 vdWH possesses tunable optical and electronic behaviour for use as a hole-transport material in solar energy harvesting, nanoelectronic and optoelectronic devices.

Ultra-broadband and wide-angle plasmonic light absorber based on all-dielectric gallium arsenide (GaAs) metasurface in visible and near-infrared region

High-performance and cost-effective broadband light absorbers are crucial for various optical applications, including solar energy harvesting, thermophotovoltaic systems, and integrated photoelectric devices. In this study, an ultra-broadband and wide-angle plasmonic light absorber (PLA) based on an all-dielectric gallium arsenide (GaAs) metasurface in the visible and near-infrared regions is proposed and numerically investigated. The unit-cell of the proposed PLA is consisted of all-dielectric GaAs cylinder resonator (CR) adhered on an ultra-thin GaAs spacer layer backed with a tungsten (W) substrate. Numerical simulation results show that the absorption peak of the proposed PLA is up to 99.85 %, 99.9 % and 99.98 % at 0.452 μm, 0.712 μm and 1.596 μm, respectively. In addition, the ultra-broadband strong absorption of over 90 % also can be achieved from 0.39 μm to 2.09 μm with a relative bandwidth of 137.1 %. The ultrabroadband strong absorption of the proposed PLA is further demonstrated by the equivalent circuit model (ECM), which displays excellent agreement with the results of the full-wave numerical simulation performed using the finite element method (FEM). The simulated electromagnetic (EM) field distributions reveal that the ultra-broadband strong absorption of the designed PLA is mainly from the excited propagating surface plasmon (PSP), located surface plasmon (LSP), cavity resonance modes combined with coupling effect between adjacent CRs. The proposed PLA is also polarization-insensitive and wide incident angles for both transverse electric (TE) and transverse magnetic (TM) modes. The absorption properties of the designed PLA can be adjusted by varying geometric parameters of the unit-cell. The PLA achieves a remarkable short-circuit current density of over 64.75569 mA/cm2 and exhibits nearly perfect solar energy trapping due to the effective coupling of multiple resonances, resulting in enhanced photovoltaic performance. Thus, the proposed PLA can be potential application in the photodetectors, thermal imaging, and solar energy harvesting devices.

Heat-sink-free solar-driven thermoelectric device for micro energy scavenging

Harvesting energy from nature, such as mechanical energy, thermal energy, and biomass energy, has become an effective way to supply power for self-driven sensing and Internet of Things (IoT) applications. Among that, solar-driven thermoelectric (STE) device takes advantage of all-solid-state energy conversion, such as no noise, easy access, and free of wear, exhibiting great potential. Here, we propose a solar-driven thermoelectric device for harvesting solar energy, based on Micro Electromechanical System (MEMS) technology. Specifically, the optimization of solar absorptances of structural layers significantly improved the photo-thermo-electric conversion performance. Furthermore, the electrical output strongly depends on temperature difference dominated by the absorptance difference. Therefore, the reported device can be free of traditional heat sink, which greatly simplifies its structure and expands the working conditions, especially in microdevices. Particularly, a continuous output voltage of 0.34 V/cm2 is achieved with concentrated solar radiation, demonstrating its potential under no heat sink conditions. Besides, a fast response (4.2 ms under 660 nm laser) is achieved benefitting from the micron-size solar absorber, showing its significance in sensing applications. Finally, the proposed STE device is utilized to harvest outdoor solar energy, displaying promising potential in solar energy harvesting devices and providing an insightful perspective for thermoelectric applications.

Characterization of the Photothermal Response in Nanocomposite Silica Aerogel Materials with Thin Metal Films

The photothermal effect, whereby light energy is converted into thermal energy when absorbed in a material, is a phenomenon that has many potential applications including solar-driven water heating and purification, and radiative heat transfer. Recently, porous materials have been tailored to exhibit the photothermal effect to be used for interfacial water evaporation and sterilization. In this work we provide the characterization of the solar-driven photothermal effect on nanocomposite aerogel materials. Aerogels exhibit a unique combination of properties that can enhance their utility as a photothermal material. Due to their inherently low density and thermal conductivity, and their exceptional insulative properties, photothermal heat generated within an aerogel can remain trapped. This work presents the photothermal effect in nanocomposite aerogels fabricated by sputtering metal and metal oxide films onto and into aerogels materials. By sputtering metal and metal oxides in a high vacuum environment and directing it towards an aerogel substrate using a magnetron, we were able to deposit thin films onto the surface of an aerogel. The composite aerogels are characterized using scanning electron microscopy (SEM) to assess the depth of the sputtered material into the aerogel pores. The reflectance and transmittance of the aerogel composites are measured using UV-Vis spectroscopy. The photothermal effect in aerogel composites is measured using thermal imaging. Our results show that the photothermal response of the composite aerogels can be tuned by varying the thickness and composition of the deposited films. Overall, our study demonstrates the potential of using magnetron sputtering to create composite aerogels with tailored photothermal properties. This opens new opportunities for a wide range of applications such as water and air heating and purification, water desalination, and solar energy harvesting devices.

Influence of atmospheric conditions on the formation and structural properties of two-dimensional SbSI films

Two-dimensional heavy pnictogen chalcohalides, such as SbSI, SbSeI, and BiSI, are promising materials for solar energy harvesting (SEH) devices. In this paper, we report the influence of atmospheric conditions on the formation and structural properties of SbSI films fabricated under N2 and air atmospheres using a modified two-step method. Under N2 atmosphere, a preferentially (121)-oriented SbSI film without impurities formed. In contrast, under air atmosphere, a film with mixed crystalline phases of SbSI and secondary Sb2O3 formed. The Sb2O3 phase could be reduced by applying excess sulfur. These results provide a fundamental step toward optimizing the properties of chalcohalides for SEH device applications.

A Techno-Economic Review of Dust Accumulation and Cleaning Techniques for Solar Energy Harvesting Devices

A Techno-Economic Review of Dust Accumulation and Cleaning Techniques for Solar Energy Harvesting Devices

Numerical and experimental studies of thermal performance enhancement for parabolic trough solar collector using none-circulated CuO/synthetic oil nanofluid

PurposeOne of the existing and commonly used solar energy harvesting devices is the parabolic trough solar collector (PTSC). Because of their ability to operate in low and medium temperatures, parabolic trough concentrators are widely used in power generation plants and industrial process heating applications. Therefore, the investigation of how different operating conditions affect these devices’ overall efficiency has received a great deal of attention in the recent decade. This study aims to enhance the thermal performance of the PTSC and reduce the system cost.Design/methodology/approachIn the novel configuration, a noncirculated nanofluid absorbs solar radiation through a glass wall. The base fluid was synthetic oil (5W30), and the nanoparticles used were copper oxide. The heat captured is immediately absorbed by the water circulating inside the copper tube immersed in the nanofluid. ANSYS FLUENT 15.0 was used for carrying out computational fluid dynamics simulations for two models of single and triple copper tubes. The experimental results obtained from a test rig constructed for this purpose were compared with the numerical outcomes of the single copper tube model.FindingsThe findings of the simulation demonstrated that performance was superior for the single copper tube model over the triple copper tube model. The numerical findings of the single copper tube model were compared with the experimental results. The numerical and experimental results differed from 3.17% to 5.6%. Investigations were carried out to study the effects of varying the volumetric flow rate of (20, 40, 60 and 80 L/h) and water inlet temperatures of (300, 315 and 330 K) on the effectiveness and performance of the newly developed model. Additionally, two nanofluid volume fractions of 0.05% and 0.075% were used for investigating their effect on the performance of the novel configuration. According to the findings, the highest thermal efficiency of 55.31% was recorded at 0.075% concentration and 80 L/h volume flow rate.Originality/valueIn this study, a novel direct absorption solar collector configuration using a noncirculated nanofluid was designed to enhance the thermal efficiency of PTSC. This new approach makes it possible to boost the thermal performance of the PTSC and lower the system’s cost.

Plasmonic Solar Energy Harvesting by ZnO Nanostructures and Their Composite Interfaces: A Review on Fundamentals, Recent Advances, and Applications

Zinc oxide is one of the inexpensive semiconductors with rich electronic and optical properties. It is studied in energy applications for a long time. The wide bandgap of ZnO either needs structural change or sensitizing via quantum dots, dyes, or metallic nanoparticles (through the plasmonic effect) to absorb visible light for applications in solar energy harvesting devices. This review provides a fundamental insight of plasmonic visible light harvesting by ZnO and an account of recent advances in solar photovoltaic, photoelectrochemical water splitting, and other photoredox activities, such as water quality enhancement and CO2 reduction.

Organic Semiconductor-Based Photoelectrochemical Cells for Efficient Solar-to-Chemical Conversion

Organic semiconductor-based photoelectrodes are gaining significant attention in photoelectrochemical (PEC) value-added chemical production systems, which are promising architectures for solar energy harvesting. Organic semiconductors consisting of conjugated carbon–carbon bonds provide several advantages for PEC cells, including improved charge transfer, tunable band positions and band gaps, low cost, and facile fabrication using organic solvents. This review gives an overview of the recent advances in emerging single organic semiconductor-based photoelectrodes for PEC water splitting and the various strategies for enhancing their performance and stability. It highlights the importance of photoelectrodes based on donor–acceptor bulk heterojunction (BHJ) systems for fabricating efficient organic semiconductor-based solar energy-harvesting devices. Furthermore, it evaluates the recent progress in BHJ organic base photoelectrodes for producing highly efficient PEC value-added chemicals, such as hydrogen and hydrogen peroxide. Finally, this review highlights the potential of organic-based photoelectrodes for bias-free solar-to-chemical production, which is the ultimate goal of PEC systems and a step toward achieving reliable commercial technology.

Perovskite quantum dot-based tandem triboelectric-solar cell for boosting the efficiency and rain energy harvesting

Silicon (Si) solar cell efficiently convert solar energy into electricity under the sun illumination, but its inherent intermittent power generation due to diurnal and seasonal cycle has usually allowed for the requirement for alternative power sources. Owing to the abundance, diversity and availability, rain drop energy is one of the most promising green energy sources. Hence, hybrid energy harvesting could be a promising strategy of achieving preferential hybrid performances without sacrificing the advantages in individual devices. Herein, we proposed a hybrid solar and rain energy harvesting device featuring the integration of triboelectric nanogenerator (TENG) top-cell and a crystalline Si solar cell bottom-cell by laminating perovskite quantum dots-embedded polydimethylsiloxane composite film (PQDP) onto the Si solar cell, which endows enhanced electrical output performances under rainy days. To overcome the limitation of low external quantum efficiency (EQE) in the ultraviolet region of the Si solar cell, the PCE of the hybrid solar cell is significantly enhanced from 18.47% of bare Si solar cell to 20.16% owing to the anti-reflection effect of PQDP film and the down-conversion property of CsPbBr3 QDs doped with Ce3+ ions. Meanwhile, this hybrid solar cell presents excellent durability after continuous measurement over 7 days. This tandem hybrid solar cell provides a promising strategy to simultaneously scavenging the solar and rain energy and boosting the power conversion efficiency by introducing the perovskite QDs without affecting the efficiency of bare Si solar cell.

A Wind-Solar Hybrid Energy Harvesting Approach Based on Wind-Induced Vibration Structure Applied in Smart Agriculture.

Solar energy harvesting devices are widely used in smart agriculture nowadays. However, when lighting conditions are weak, such as through the night or on cloudy days, efficiency decays a lot. Additionally, as time goes by, more and more dust and bird droppings accumulate on the panel, which decreases the performance significantly. This paper aims to overcome the disadvantages mentioned above, and a novel wind-solar hybrid energy harvesting approach is proposed with an oscillation-induced dust-cleaning function. A wind-induced vibration device is specially designed in order to generate electrical energy and/or clean the photovoltaic panel. While in good lighting conditions, the device could keep the panel in a stable state and optimize the photovoltaic power generation efficiency. Such a hybrid energy harvesting approach is called a "suppress vibration and fill vacancy" algorithm. The experimental platform of the proposed device is introduced, and both experimental and simulation results are attained, which prove that using this device, we could realize multiple purposes at the same time.