Soil Burial Research Articles

Soil burial degradation of chemically compatibilized poly(butylene adipate-co-terephthalate)/thermoplastic starch/poly(ε-caprolactone)/cellulose biocomposites

Developing bio-blends and biocomposites has become a widespread strategy to combat plastic pollution in line with sustainability principles and decarbonization necessities. Although chemically modified ternary and quaternary biocomposites are developing rapidly because of their broader processing and performance windows than single matrix and binary counterparts, a few have been reported about their biodegradation. Herein, diisocyanates-based chemically modified ternary biocomposites based on poly(butylene adipate-co-terephthalate), thermoplastic starch (TPS), poly(ε-caprolactone) (PCL), and cellulose (Mater-Bi/PCL/cellulose) are prepared and undergone soil burial biodegradation providing a broader perspective on biodegradation of complicated systems. The mass gain of sunflower sprouts, weight retention, and the appearance of biocomposites are studied and discussed in the course of biodegradation. The unfilled Mater-Bi/PCL bio-blends presented moderate mass loss over 12 weeks, attributed to the presence of TPS in the Mater-Bi phase. The PCL addition hindered TPS decomposition and featured a noticeably lower degradation rate compared to previous reports. A significant increase in the b* parameter (position on the blue-yellow axis in the CIELAB color space), along with the yellowness and whiteness indices, was observed. Prior to soil burial, roughness differences were negligible. Still, they significantly increased over time due to the higher hydrophilicity of unfilled Mater-Bi/PCL and biocomposite containing unmodified filler.

Eco-friendly natural rubber-based hydrogel loaded with nano-fertilizer as soil conditioner and improved plant growth

This study addresses the dual challenge of agricultural cost and waste management by harnessing agrarian waste to produce nano-fertilizers (NF) to enhance crop yield while mitigating environmental impacts. Recognizing the limitations of traditional hydrogels' non-biodegradability and their inability to sustain root zone moisture and nutrient levels, we developed an LNR/AAc/pectin hydrogel. This innovative hydrogel offers a viable solution that provides a consistent NF supply and improves water retention efficiently. Additionally, we utilized Fourier transform infrared (FTIR) spectroscopy, scanning electron microscopy-energy dispersive x-ray (SEM-EDX), and thermogravimetric analysis (TGA) to analyze the hydrogel's structure, stability, and form. Transmission electron microscopy (TEM) and X-ray fluorescence spectroscopy (XRF) were employed to ascertain the NF concentration. The optimization of the hydrogel's swelling and NF release was conducted through a 5-level, 2-factor Response Surface Methodology (RSM), focusing on the effects of the AAc: LNR ratio and pectin weight while maintaining constant concentrations of potassium persulfate (KPS) and MBA. Results revealed a high correlation between predicted and experimental values, with determination coefficients (R2) of 0.9982 for swelling and 0.9979 for NF release. Furthermore, the hydrogel exhibited a 96.30 % biodegradation rate after 120 days of soil burial. Our findings demonstrate the hydrogels' potential to significantly impact farming and gardening by ensuring a sustainable supply of nutrients to enhance soil moisture retention.

Unveiling the potential of bacterial isolates from plastic-polluted environments: enhancement of polyhydroxybutyrate biodegradation

This study explores the biodegradation potential of microbial isolates focusing on their ability to utilize biopolymers as sole carbon source. Previously described isolates have been investigated through agar-based screen for the ability to degrade plastic-related substrates in powder form, and four strains have been selected for further assessment. Polyhydroxybutyrate (PHB) films degradation was examined through liquid culture, soil burial, and respirometry assays. Structural and chemical alterations in PHB were analysed using scanning electron microscopy (SEM), Fourier-transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). The most successful strains were tested for the ability to degrade PHB/bacterial nanocellulose (BNC) blends. Bacillus sp. DG90 excelled in PHB degradation, achieving 60% weight loss in liquid culture, while Streptomyces sp. DG19 exhibited a notable degradation rate of 51 ± 1.7%. Soil burial assays underscored the impact of environmental factors on degradation rates, emphasizing the role of soil composition and nitrogen availability. In respirometry assay, PHB films were severely defragmented by Streptomyces sp. DG19 with overall weight loss of 83%, while for Bacillus sp. DG90, this percentage reached 39%. FTIR and DSC analyses suggested potential hydrolysis and structural alterations in treated samples. This study observed rapid PHB degradation (83% in 3 weeks) while, considering the complex composition of modern biomaterials, also showcased the potential of examined strains to degrade PHB-BNC blends up to 85%.

Synergistic effects of chitosan and gamma irradiation on enhanced fungal growth inhibition and biodegradability of natural rubber latex film

Developing novel formulations and processes to improve the fungal growth inhibition and biodegradability of NR products has become a major challenge for the scientific community, given the health risks associated with fungi in natural rubber (NR) products and the environmental concerns regarding NR waste. Consequently, this study comprehensively investigated the synergistic effects of chitosan and gamma irradiation on enhancing fungal growth inhibition and biodegradability in natural rubber latex (NRL) films. The research involved incorporating varying chitosan contents (0, 3, 6, or 9 phr) into NRL composites and exposing them to different gamma doses (0, 5, 10, or 15 kGy). The results showed that increasing the chitosan content and the gamma dose improved the ability of the NRL samples to inhibit fungal growth on their surfaces. This was evidenced by the absence of fungal colonies after 7 days of incubation on potato dextrose agar (PDA) plates for NRL samples irradiated at 5–15 kGy with 9 phr of chitosan. This determination was based on isolating fungi from the film surfaces, followed by serial dilution and a viable plate count. The biodegradability tests also revealed that the NRL films irradiated at 15 kGy with 9 phr of chitosan had the highest weight loss, reaching as high as 10.42 ± 0.62 % after soil burial for 8 weeks. However, the results indicated that gamma irradiation on the pristine NRL and chitosan/NRL films did not substantially alter the thermal stabilities, density, morphology, and functional groups of the samples. Lastly, by comparing the tensile properties of all the NRL films to the ASTM D3578-01a standard for examination gloves, the optimum conditions for the NRL films were 5 kGy of gamma irradiation with 9 phr of chitosan. This combination resulted in gloves with sufficient tensile strength and complete fungal growth inhibition.

Effects of Egg and Snail Shells on Biodegradation and Tensile Properties of Waste Plastics Fabricated Thermoplastics Elastomer Composites

The essence of this study is to proffer solution on the degradation of the environment caused by non-degradable plastics waste. A novel approach on plastic waste management was adopted by fabricating a thermoplastic natural rubber (TPNR) composite using waste Polyethyleneterephthalate {PET}plastics and eggshell as biofillers to initiate degradation by microorganism.Waste Polyethylene Terephthalates (PET) was grinded andmelted blended with Natural Rubber with 40pphr of Eggshell to fabricate a Natural Rubber Thermoplastic elastomer (TPNR) composite. The resultant thermoplastic elastomer composite was prepared for soil burial for a period of 90 days to obtain percentage weight loss as an indication of biodegradation. The NR/PET composite was evaluated for tensile properties. The results obtained were of the new that the tensile strength, elongation at break and modulus decreases with increase in soil burial duration time. The eggshell as a biopolymer has been shown to initiate biodegradation. There was a reduction in tensile strength at a blend ratio of 50/50 NR/PET blend, an indication that degradation has occurred, hence tensile properties are useful tools for the evaluationof biodegradation of polymeric materials

Combination Of Makahiya (Mimosa Pudica) Plant and Garlic(Allium Sativum) Peels as Alternative Raw Materials in Organic Kitchen Towel Production

Although kitchen towels are a household necessity, they have also become a contributing factor to deforestation because they are often composed of wood pulp, making it the reason for habitat loss. This study was conducted to test the capabilities of the Makahiya plant and Garlic peels as substitute raw materials for kitchen towel production. The process entails creating three kitchen towel samples with varying concentrations and putting them through three tests. This study also utilized the quasi-experimental method to test the hypothesis and the relationship of the variables. While conducting soil burial testing in one of the researchers’ residences, the researchers used laboratory testing with the Department of Science and Technology (DOST) for absorbency and durability testing. The findings illustrate that cellulose from the Makahiya plant and cellulose from Garlic peels work well together as an alternative raw material for kitchen towel-making. Researchers concluded that a 30:70 ratio— 30% cellulose from Makahiya and 70% cellulose from Garlic peels—was ideal for this production. The result presents a 1.13g average for soil burial, a 7-second average for absorbency, and 1.3 and 1.9 apparent elongation for durability. It just suggests that it could function as a replacement for those sold commercially.

Modeling and tracing of polycarbonate (PC) degradation in soil microcosm with a PC microplastics quantification method based on pyrolysis GC–MS

Understanding the migration and transformation of polycarbonate (PC) plastic wastes in the natural environment is crucial for assessing their environmental impact and bioremediation. In this study, PC plastic degradation was modeled and traced in soil microcosm by investigating physiochemical properties changes of PC, the formation of microplastics, and changes in soil microbial communities. Notably, PC microplastics quantification method was also successfully devised by pyrolysis gas chromatography mass spectrometry and also applied herein. Through gel permeation chromatography analysis, the molecular weight of the naturally aged PC film obviously reduced, whereas no change for unaged ones. After 12 months of soil burial, the surface corrosion and holes formation were emerged on the surfaces of both PC films in the non-sterilized soil harboring indigenous microorganisms by scanning electron microscope. The worsened thermal stability of both PC films in non-sterilized soil was demonstrated by thermogravimetric analysis. Meanwhile, the presence of increased hydroxyl group absorption and decreased carbonyl peak highlighted molecular chain breakage in both PC films by Fourier transform infrared spectroscopy. In particular, all the changes were more significant in aged PC than unaged ones. Furthermore, the increase of quantified PC microplastics on the surface of PC film in the non-sterilized soil accompanied the decreasing of microbial diversity and the enrichment of potential functional microorganisms. These findings revealed that the combination of natural aging and indigenous microbes exhibited a noticeable performance in PC plastics degradation in soil microcosm, providing new insights into the degradation mechanism of PC plastic wastes in the natural environment.

Olive stone powder filled bio-based polyamide 5.6 biocomposites: biodegradation in natural soil and mechanical properties

The extensive use of non-biodegradable and petroleum derived polymers in industry exacerbates environmental problems associated with plastic waste accumulation and fossil resource depletion. The most promising solution to overcome this issue is the replacement of these polymers with biodegradable and bio-based polymers. In this paper, novel biocomposites were prepared from bio-based polyamide 5.6 (PA56) with the addition of olive stone powder (OSP) at varying weight concentrations by melt compounding method. The degradability of the prepared biocomposites is investigated through soil burial test, and assessed by reduction in their mechanical properties. The biodegradability of bio-based polyamide 5.6 is shown to be improved by addition of olive stone powder, and its effects on the properties of polymer matrix are elucidated. The Fourier transform infrared (FTIR) spectrum of the biocomposites indicate the successful incorporation of OSP into PA56 polymer matrix. After six-month soil burial test, scanning electron microscopy and FTIR show the degradation of PA56 through morphological and structural changes, respectively. Differential scanning calorimetry reveals the changes in the transition temperatures of the polymer matrix and an increase in crystallinity. Thermogravimetric analysis is used on the biocomposite to determine the fraction of its components, polymer and biofiller, and the results show that 2.67% (w/w) of the polyamide 5.6 is biodegraded at the end of the six-month soil burial.

Microstructure characterization and corrosion resistance in soil of Mg-2Zn-xCe-yCu alloy for light agricultural machinery

The microstructure, mechanical properties, corrosion behavior, and potential for lightweight applications of Mg-2Zn alloys enhanced with Cu and Ce were investigated. It was observed that the Ce and Cu-containing phases displayed various morphologies in the as-cast and extruded conditions. The extruded alloy, containing 0.8 wt% Ce and 0.5 wt% Cu, exhibited optimal mechanical properties, with the yield strength of 289 MPa, ultimate tensile strength of 336 MPa, and elongation of 15.8 %. Grain boundary and precipitation strengthening significantly contributed to the increase in yield strength. After four months of soil burial, the specimen surface showed localized pits and cracks, likely serving as anodes in the areas including Ce and Cu-containing phases. The corrosion rates in different soil environments paddy, vegetable, orchard, and corn fields were 2.029, 2.293, 2.133, and 1.986 mg·cm−2·d−1, respectively indicating variations due to complex soil conditions. The corrosion products included Mg(OH)2 and Mg5(CO3)4(OH)2·4 H2O, among others, throughout the burial period. Furthermore, model assembly in SolidWorks and static structural simulation with ANSYS confirmed the alloy's reliable load-bearing capacity, safety, and potential as the material for lightweight agricultural machinery.

Seed traits and burial state affect plant seed secondary dispersal mediated by rodents

Seed dispersal is an important ecological process and has important implications for plant population expansion and regeneration. Seed dispersal not only reduces the probability of death due to seed density but also facilitates seedling establishment. Many studies have focused on the effect of one or two factors on seed dispersal. However, little is known about studies on the effect of multiple factors and their interactions on seed dispersal. Here, we conducted a field experiment to explore how seed size, soil burial, and seed peeling affect the dispersal and hoarding of seeds of Quercus liaotungensis in dispersal animals. We found that large seeds were preferentially selected by animals, and the predation after dispersal, hoarding after dispersal, predation distance after dispersal, and hoarding distance after dispersal of large seeds were significantly greater than small seeds, which is more beneficial to the plant expansion and regeneration. Soil burial increased the time of seed intact in situ, significantly increased predation in situ, and reduced predation after dispersal, predation distance after dispersal, and hoarding distance after dispersal, which is not beneficial to the plant population expansion and regeneration. Seed peeling reduced the time of seed intact in situ, and the predation after dispersal was significantly greater than that of unpeeled seeds, which is not beneficial to the plant population. We did not find the interactions between seed size, soil burial, and seed peeling on dispersal. The effects of a single factor may be more than their interactions between seed size, soil burial and seed peeling on dispersal. These results implied that seed size, soil burial and seed peeling may affect plant population expansion and regeneration by affecting the dispersal and hoarding of animals.

All-natural, hydrophobic, strong paper straws based on biodegradable composite coatings

Plastic-coated paper straws are insufficient to solve the plastic pollution problem because microplastics are formed during their degradation. In this study, upgraded paper straws were prepared by coating with biodegradable sodium alginate/cellulose nanofiber/stearic acid (SA/CNF/STA) on the surface of paper without additional adhesives. The tensile strength of the paper was enhanced synergistically by the coated SA and CNF after cross-linking with Ca2+ ions, reaching a maximum (26.46 MPa) when the mass ratio of SA to CNF was 4:1. The straws were prepared by spirally winding coated paper into tubes. Subsequent STA modification with different concentration (1–40%) improved the water stability of the paper straws. The paper straws exhibited excellent mechanical properties (including 13.45 MPa of flexural strength, 13.30 MPa of compressive strength) and hydrophobicity (103.67° of maximum water contact angle). After 130 days of soil burial, the paper straws were completely degraded. The comprehensive performance of prepared straws exceeds that of commercially available products in the same category, and they are safe and biodegradable. Paper straw in the work is in line with the concept of green and low-carbon development.

Fabrication and characterizations of screw pine root fiber reinforced soy composite as sustainable green composite

AbstractScrew pine root fibers are engineering fibers that have yet to be explored in terms of its chemistry with bio‐resin in biodegradable composites to replace nonbiodegradable thermoplastics used in packaging, automobiles, furniture, and industrial sectors. Screw pine root fibers are reinforced with soy, poly(vinyl alcohol), and soy‐poly(vinyl alcohol) resin systems in this work to create a variety of composites. Composites demonstrated highest amount of tensile strength at around 39.7 MPa, 37.6 MPa of flexural property, along with an impact strength around 12.4 kJ/m2. The thermal solidity of the optimized material was determined to be 235°C. After 24 hours of immersion, the composite had the lowest water absorption of 18.4%. All composites were shown to be biodegradable, losing about 54.2%–72.9% of their original mass after 60 days in soil burial. Unique characteristics such as the use of low‐cost agricultural materials, water‐based resin, stable composite, and properties such as moderately strong, safe disposal after service periods make these manufactured composites market feasible as consumer‐friendly/ecofriendly green products.Highlights Screw pine root fibers were extracted from waste roots and used as reinforcement. The tensile strength of the composite was achieved as 39.7 MPa. The water absorption of hybrid composite was found 30.8% after 24 h. After 60 days under soil burial, composite lost 67.5% of its original weight Developed composites can be good alternant for nondegradable thermoplastic.

Environmentally Compatible Poly (Vinyl Alcohol)/Banana Peel Nano Crystals/Bentonite Clay-based Composites Films: Influence of Nano Filler on Biodegradation Behavior

Objective: The present work shows the effect of Bentonite Clay (BC) on the biodegradation behavior of Poly Vinyl Alcohol (PVA)/Banana Peel Nano Crystals (BPNC) composite films. background: Nowadays, composite films manufactured from biodegradable or partially biodegradable polymers reinforced natural fillers start to gain attention because they are considered as one of the environmentally friendly biomaterials Method: Biodegradation studies were conducted using soil burial and bacterial degradation method. The prepared composite films were characterized by scanning electron microscopy. Results: Biodegradation studies reported that the composite films were more degradable in bacterial environment as compared to natural soil burial. The addition of Bentonite Clay (BC) had negative effect on degradation rate of composite films. method: Biodegradation studies were conducted using soil burial and bacterial degradation method. The prepared composite films were characterized by scanning electron microscopy. Conclusion: PVA/BPNC/BC composite film showed less weight loss (%) as compared to PVA/BPNC composite films because BC had stabilizing effect against the microbial attack which prevents biodegradation.

Insights into cork weathering regarding colour, chemical and cellular changes in view of outdoor applications.

A comprehensive analysis of outdoor weathering and soil burial of cork during 1-year experiments was carried out with measurements of CIELAB color parameters, cellular observations by scanning electron microscopy, and surface chemical features analysed by ATR-FTIR and wet chemical analysis. Cork applied in outdoor conditions above and below ground retained its physical structure and integrity without signs of deterioration or fracturing. The cellular structure was maintained with some small changes at the one-cell layer at the surface, featuring cellular expansion and minute cell wall fractures. Surface color and chemistry showed distinct results for outdoor exposure and soil burial. The weathered cork surfaces acquired a lighter color while the soil buried cork surfaces became darker. With outdoor weathering, the cork polar solubles increased (13.0% vs. 7.6% o.d. mass) while a substantial decrease of lignin occurred (about 28% of the original lignin was removed) leading to a suberin-enriched cork surface. The chemical impact on lignin is therefore responsible for the surface change towards lighter colors. Soil-burial induced hydrolysis of ester bonds of suberin and xylan, and the lignin-enriched cork surface displayed a dark brown color. FTIR and wet chemical results were consistent. Overall cork showed a considerable structural and physical stability that allows its application in outdoor conditions, namely for building façades or other surfacing applications. Architects and designers should take into account the color dynamics of the cork surfaces.

Polyhydroxybutyrate (PHB)-Based sustainable bioplastic derived from Bacillus sp. KE4 isolated from kitchen waste effluent

Petrochemical-derived plastics pose a major threat to the biosphere and the environment due to their acute or long-term toxicity. Therefore, to ensure sustainability, it is essential to find an effective replacement for synthetic plastics with natural and ecofriendly biomaterial. In this context, production of polyhydroxybutyrate (PHB) was produced by the Bacillus sp. KE4 using glucose as the carbon source, and a maximum dry cell weight (DCW) of 4.4 g/l with a PHB concentration of 3.1 g/l, PHB yield of 0.15 g/g was obtained, and the PHB content was 70.4% of the DCW. The extracted biopolymer was characterized using FTIR, GC-MS, 1H NMR, and 13C NMR which confirmed the structure of the biopolymer as PHB. The findings of TGA, DTG, DTA and DSC studies corresponded to PHB's excellent thermal stability. PHB biopolymer has a melting temperature of 168.7 °C and a maximum degradation temperature of 273 °C. The weight average molar mass (Mw), number average molar mass (Mn), and polydispersity index (PDI) of the extracted PHB was 1,55,436 g mol−1; 1,43,258 g mol−1; and 1.08, respectively. The XRD analysis validated the material's partly crystalline nature. FESEM-EDS and XPS were employed to determine the elemental composition of the purified PHB film. The Young's modulus, tensile strength and elongation at break showed rigid and brittle nature of PHB. Using open windrow composting method, the extracted PHB biopolymer film was assessed to determine its biodegradability. Within 28 days of soil burial, it was found that the biopolymer film had degraded by 61.34%. Cytotoxicity assessment in HepG2 cells indicated that PHB is non-cytotoxic in nature. The results have showed that the biomaterial is environmentally benign, biodegradable, and biocompatible; therefore, it may find its diverse application covering packaging, medicine, agriculture and allied fields.

Upcycling Low-Quality Cotton Fibers into Mulch Gel Films in a Fast Closed Carbon Cycle.

Low-quality cotton fibers, often overlooked as low-value materials, constitute a marginalized waste stream in the cotton industry. This study endeavored to repurpose these fibers into mulch gel films, specifically exploring their efficacy in covering moisture-controlled soil beds. Through a meticulously designed series of processing methods, cellulose/glycerol film was successfully fabricated by regenerating cellulose hydrogels in N,N-dimethylacetamide/lithium chloride solutions, followed by plasticization in glycerol/water solutions and hot pressing. The film was then employed to cover soil beds for a duration of up to 252 days, followed by soil burial assessments. Despite expectations of degradation, the film maintained structural integrity throughout the soil covering period but underwent complete biodegradation after 80 days of soil burial, thereby completing a closed carbon cycle. Intriguingly, both tensile strength and modulus exhibited no diminishment but instead increased after soil covering, contrary to expectations given the usual role of degradation. Mechanistic insights revealed that the removal of glycerol contributed to the mechanical enhancement, while microbial activity predominately decomposed the amorphous regions in soil covering and targeted the crystalline portions in soil burial, elucidating the main biodegradation mechanisms. In summary, this study presents, for the first time, the potential of upcycling low-quality cotton fibers into high-value mulch gel films for agricultural practices within a closed carbon cycle.

Development and characterizations of jarosite waste reinforced poly(vinyl alcohol) composites: A sustainable approach toward solid waste management

AbstractJarosite, an industrial waste, has the potential to be used as an alternative filler in biocomposites used as packaging material and can replace nondegradable thermoplastic. Such a novel approach of waste management strategy has not been studied till date. In this research work, different weight percentages of jarosite were mixed with poly(vinyl alcohol) (PVA) to fabricate polymer composites with better physico‐chemical, thermal, tensile, and biodegradation properties. The data indicate that a low concentration of jarosite (3 wt.%) improved the tensile strength by 198.7% and the composite showed higher thermal stability by 6.3% than that of the neat PVA. X‐ray diffractogram and transmission electron microscopic analysis revealed a strong interaction between PVA and jarosite. Interestingly, the addition of jarosite reduced the water absorption capacity and thickness swelling of the PVA composite by 58% and 54.7%, respectively. Jarosite‐incorporated composites showed lesser degradation potential (64%) than the control composites (84%) after 60 days under soil burial conditions, indicating that PVA‐jarosite composites have a higher shelf‐life, which is needed for packaging materials. These composites can also be good alternant for thermoplastic used in preparation of cuboid, sealing, and decorative materials. Also, this would be a novel sustainable approach for managing/reducing jarosite waste.Highlights Jarosite was reinforced with PVA to fabricate biocomposites. The maximum tensile strength of the composite was achieved as 45.4 MPa. The thermal stability of mechanically optimized composite is found at 320°C. After 60 days under soil burial, the composite lost 64.8% of its original weight. Developed composites can be good alternant for nondegradable thermoplastic.

Carbon Dot-Modified Electrospun Cellulose Acetate Mats: Increased Susceptibility to Degradation under Soil Burial and UV Irradiation

Carbon Dot-Modified Electrospun Cellulose Acetate Mats: Increased Susceptibility to Degradation under Soil Burial and UV Irradiation

New modifications of PBAT by a small amount of oxalic acid: Fast crystallization and enhanced degradation in all natural environments

Biodegradable plastics are often mistakenly thought to be capable of degrading in any environment, but their slow degradation rate in the natural environment is still unsatisfactory. We synthetized a novel series of poly(butylene oxalate-co-adipate-co-terephthalate) (PBOAT) with unchanged melting point (135 °C), high elastic modulus (140 - 219 MPa) and elongation at break (478 - 769%). Fast isothermal crystallization with a semi-crystallization time < 20 s was demonstrated by the PBOAT. In N2 and air atmospheres, the PBOAT maintained the Td,5% higher than 329 °C. They also had good thermal stability at melt processing temperature for more than 20 min. PBOAT exhibited faster hydrolysis and seawater degradation, even under natural soil burial without light, but still kept stable under low humidity conditions during the storage and the shelf-life. Moreover, the hydrolysis mechanisms were clarified based on Fukui function analysis and DFT calculation, indicating that the hydrolysis of PBOAT would be more straightforward. The mechanism of soil burial is also elucidated through detailed characterization of the structure changes. The PBOAT offered a fresh approach to the development of high-performing, naturally degradable materials.

Exploring sustainable food packaging: Nanocellulose composite films with enhanced mechanical strength, antibacterial performance, and biodegradability

Food packaging films play a vital role in preserving and protecting food. However, due to their non-biodegradability, conventional packaging materials have led to significant environmental pollution. To overcome this hurdle, we have developed safe, innovative, sustainable and biodegradable packaging materials that can effectively extend the shelf life of food. In this study, two types of cellulose materials cellulose nanofibers (CNF) and carboxymethyl cellulose (CMC) with complementary roles were combined to prepare nanocellulose composite films with high transparency (90.3 %) of a certain thickness (30 ± 0.019 μm) by solution casting method, and their mechanical properties were further optimized by the addition of plasticizer-glycerol (Gly) and cross-linking agent-glutaraldehyde (GA), so as to maintain the strong tensile strength (≈112.60 MPa) and better malleability (4.12 %). In addition, we loaded the natural active agent tea polyphenols (TPs) with different concentrations to study the inhibition effect on E.coli and S.aureus and to simulate food packaging. Finally, we also found that the synthesized nanocellulose composite films can also achieve rapid degradation in a short time through soil burial, water flushing and immersion. The excellent performance demonstrated in this study provides reference value for further replacing petroleum-based materials with biomass materials in the field of food packaging.