Soft Tissue Thickness Research Articles

Consensus Report by the Italian Academy of Osseointegration on the Importance of Peri-Implant Soft Tissues.

Background and Objectives: The influence of the quantity and quality of peri-implant soft tissue on implant health and long-term maintenance is controversial. This consensus aimed to assess the importance of peri-implant soft tissue by analyzing four aspects: the role of keratinized mucosa (KM), the efficacy of specific collagen matrix, the influence of abutment material, and soft-tissue thickness. Materials and Methods: Active members of the Italian Academy of Osseointegration (IAO) participated in the consensus. Four systematic reviews were conducted, and their results were discussed to provide guidelines on the importance of soft tissue around implants. The first review evaluated the effect of KM on soft-tissue health, peri-implant bone loss, and patient-related variables. The second one analyzed if there was a specific type of matrix that provided better results in terms of peri-implant buccal soft-tissue thickness and keratinized mucosa width compared to autogenous soft-tissue graft. The third review evaluated the influence of different abutment materials on the soft tissues, and the fourth assessed the effect of soft-tissue thickness on peri-implant marginal bone loss (MBL). Results and Conclusions: The agreements reached by the assembly were as follows: the presence of supra-periosteal keratinized tissue is considered to favorably influence peri-implant health and aesthetics but had no relation to preventing bone crest resorption unrelated to infection. It facilitates patient cleaning around implants and reduces patient-reported pain. The free gingival graft (FGG) is considered the best in terms of supra-periosteal KM increase. Connective tissue grafts (CTG) perform better than volume-stable collagen matrices to increase soft-tissue thickness. Collagen matrices reduce surgical time and patient morbidity and can give better camouflaging. The influence of abutment material (titanium or zirconia) on MBL remains controversial, and no conclusion could be reached on this issue. Peri-implant soft-tissue health and recession seem not to be influenced by abutment material, but data are limited to zirconia and titanium. Although this systematic review highlighted the absence of a correlation between soft-tissue thickness and MBL, the assembly failed to find a consensus on this issue.

Virtual Surgical Planning and Customized Subperiosteal Implant for Reconstruction of Maxillary Defect After Oncological Resection.

Reconstructing defects after jaw tumor removal is difficult because of the complex facial skeleton, which affects patient nutrition and self-confidence. Traditional methods like iliac bone or fibula grafts take a long time and may raise aesthetic issues. Advancements in computer-aided three-dimensional (3D) modeling allow precise surgical planning, leading to more symmetrical reconstructions. Moreover, the application of custom-designed prostheses, similar to joint prostheses used in joint surgery, offers promising outcomes, particularly in cases involving the removal of the ramus and temporomandibular joint. A 28-year-old female had a maxillectomy for maxillary myxoma, using 3D-printed implants for reconstruction and dental rehabilitation. "Computer-Aided Design" software optimized implant coordination, reducing soft tissue pressure. Postoperative permanent dentures were successful with few complications. Compared with traditional methods, 3D-printed titanium plates improve patient satisfaction and reduce treatment time, particularly with sufficient soft tissue thickness, offering aesthetic benefits and eliminating extra surgeries for effective defect treatment.

A Comprehensive Ultrasound Investigation of Lower Facial and Neck Structure.

The jawline and neck significantly influence facial aesthetics. Botulinum toxin and filler are highly favored as minimally invasive jawline rejuvenation procedures. However, little evidence exists on the age-related skin and superficial fat tissue transformations in healthy individuals to guide targeted interventions. A quantitative sonographic assessment was conducted on 51 patients. Total soft tissue thickness (the skin and superficial fat compartments) was measured at eight sites along the jawline and four sites at the neck. Among them, 21 patients received botulinum toxin A (BTX-A) injections for jawline lift. Three-dimensional images and questionaries were obtained before and after the treatment. In this ultrasound study, total superficial soft tissue thickness decreased significantly from the prejowl sulcus to the lateral cheek, with the jowl showing the greatest thickness. Vertically, significant differences in thickness were noted between superior and inferior points, especially at the inferior prejowl sulcus for the middle-aged and the jowl for the elderly group when comparing across age groups. Soft tissue thickness at the neck decreased from zones 1 to 3, consistent in all age groups. BMI and age positively correlated with soft tissue thickness at the jawline and neck. Regarding BTX-A injections, participants described a pain-free injection process, of which 85.7% reported substantial aesthetic improvement and sharpening of the submental-cervical angle. This study quantified age-related changes in superficial soft tissues at the jawline and neck regions with ultrasound imaging. With aging, soft tissue thickness alters with high region-specificity. Tailoring interventions to the specific alterations within each age group can achieve optimal results with enhanced safety. This study provided a quantitative analysis of skin and superficial fat compartment thicknesses for the young, middle-aged, and elderly groups. This study illustrated how skin and superficial fat compartments change with age in a regionally specific manner for both the jawline and neck regions. This study revealed a positive association between BMI and age with skin and superficial fat tissue thicknesses, especially in areas like the jowl, submental, and neck. This study provided guidance for a safe and effective botulinum toxin. A injection method focusing on the injection depths and regions to achieve optimal jawline rejuvenation outcomes and patient experience. This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 .

Clinical efficacy of two vertical soft tissue augmentation techniques for peri-implant crestal bone level stability: A randomized clinical trial.

This study aimed to compare the efficacy of two techniques-acellular dermal matrix (ADM) grafting and tenting technique (TT)-for soft tissue height (STH) augmentation simultaneous to implant placement to minimize peri-implant crestal bone level (CBL) changes. Forty patients with a healed single mandibular posterior edentulous site with a thin soft tissue phenotype were enrolled. Twenty patients received simultaneously to implant placement ADM grafting, while the others received submerged healing abutment (TT). Clinical peri-implant soft tissue height and radiographic CBL changes were measured at restoration delivery and 1-year follow-up. Both techniques effectively increased soft tissue thickness, resulting in a final average STH of 3.4 ± 0.5 mm after augmentation. On average, soft tissue increased by 1.6 ± 0.5 mm in group ADM and by 1.8 ± 0.4 mm in group TT after augmentation. In Group ADM, mesial CBL decreased from 0.4 ± 0.3 mm to 0.1 ± 0.2 mm, and distal CBL decreased from 0.5 ± 0.3 mm to 0.2 ± 0.3 mm over 1 year. In Group TT, mesial CBL remained stable at 0.3 ± 0.2 mm, while distal CBL reduced slightly from 0.5 ± 0.5 mm to 0.3 ± 0.2 mm. Both groups showed minimal changes in CBL, indicating great stability (pmesial = 0.003, pdistal = 0.004). TT was particularly effective in preventing mesial bone loss (pmesial = 0.019). The mesial CBL changes significantly differed between groups (p = 0.019), and not significantly at distal sites (p = 0.944). Neither treatment exhibited significant bone remodeling below the implant shoulder. This study suggests that both techniques were successful in STH augmentation, and they may effectively reduce peri-implant crestal bone level changes, with TT being slightly superior. TT was more prone to post-surgical complications. This RCT was not registered before participant recruitment and randomization.

The incidence, clinical features and risk factors for postoperative retropharyngeal hematoma and related dyspnea following anterior cervical discectomy and fusion: a single-center study of 10615 patients

BACKGROUND CONTEXTPostoperative retropharyngeal hematoma (PRH) and related dyspnea are rare but life-threatening complications following anterior cervical discectomy and fusion (ACDF) that require urgent recognition and treatment. However, current knowledge of PRH after ACDF is limited. Meanwhile, whether the morphological features of upper airway are the risk factors of PRH remains unknown. PURPOSEThe study aimed to investigate the incidence, clinical features, and risk factors, especially the morphological features of upper airway, of PRH and related dyspnea following ACDF. STUDY DESIGNA nested case‒control study. PATIENT SAMPLEConsecutive patients who underwent ACDF at a single institute from January 2010 to December 2021 were retrospectively reviewed. OUTCOME MEASURESThe outcome measures included the incidence, clinical features, intervention, outcome and risk factors for PRH and related dyspnea. METHODSAll patients with PRH were classified into the hematoma group. For each PRH subject, 3 control subjects without PRH were randomly selected as the control group. The clinical features, interventions and outcomes of patients were described. Potential risk factors were evaluated, including demographics, comorbidities, surgical characteristics, coagulation function, blood loss, preoperative blood pressure, and the morphological features of upper airway [prevertebral soft tissue thickness (PVT) and location of transverse arytenoid muscle (TAM) and epiglottis]. Univariate tests and multivariable logistic regression analysis were used to determine the risk factors for PRH. Subgroup analysis was also conducted for PRH patients with and without dyspnea. RESULTSAmong the 10615 patients who underwent ACDF, 18 (0.17%) developed PRH. The median time from the index surgery to PRH formation was 8.5 hours (25 and 75 percentile: 4 hours to 24 hours). All the PRH patients initially presented with wound swelling. Twelve (0.11%) patients presented dyspnea due to PRH, 2 of whom received urgent intubation and 1 of whom received emergent tracheotomy. All patients underwent hematoma evacuation, and most of them presented with completely relieved symptoms after evacuation, except for 1 patient who died from ischemic hypoxic encephalopathy. A level between the epiglottis and the TAM (LET) greater than 2, ossification of posterior longitudinal ligament (OPLL) and higher diastolic blood pressure (DBP) before surgery were found to be risk factors for PRH formation. Subgroup analysis revealed that a smaller prevertebral soft tissue thickness at C5 was associated with the development of dyspnea. CONCLUSIONThis study is the largest study to date focusing on the PRH and related dyspnea after ACDF. Our study showed that the incidences of PRH and related dyspnea after ACDF were 0.17% and 0.11%, respectively. The predominant symptoms of PRH were wound swelling and acute dyspnea. Most PRH cases occurred in the acute postoperative period. We demonstrated the risk factors for PRH to be (1) OPLL, (2) LET≥2 and (3) higher DBP before surgery and advocate paying increased attention to upper airway morphological features for identifying the risk of PRH after ACDF. With urgent recognition and timely intervention, severe clinical outcomes could be avoided.

Collagen Matrix for Increasing Peri-implant Mucosal Thickness in Smokers: A Prospective Case Series.

This prospective case series aimed to evaluate the feasibility of using a volume collagen matrix for soft tissue augmentation to increase mucosal thickness in single implants in smokers who consume more than 10 cigarettes per day. Participants had single submerged implants necessitating soft tissue thickening. Soft tissue augmentation was done using a collagen matrix in the second-stage surgery. The primary outcome was soft tissue thickness at 90 days post-surgery. Secondary outcomes included median thickness at 30 and 60 days, changes in buccal soft tissue profile (digital measurements) at 30, 60, and 90 days, and oral health-related quality of life using OHIP-14 up to 90 days post-surgery. Pain levels via VAS scale and adverse effects were also assessed. Ten participants (4 men, 6 women) aged 45.2 ± 13.18 years initially smoked 10-20 cigarettes daily (average: 14.70 ± 3.47 cigarettes/day). After 90 days, median soft tissue thickness increased to 3.00 (2.00;3.00) mm. Buccal soft tissue profile (median change in ROI) increased by 0.40 (0.25;0.62) mm at 90 days. Pain levels decreased, and oral health-related quality of life improved significantly. No complications were reported. The collagen matrix significantly augmented buccal soft tissue thickness at implant sites in smokers (>10 cigarettes/day), with favorable outcomes and no complications.

Staged Regenerative-Phenotype Modification Therapy for Multiple RT3 Gingival Recessions in Periodontally Compromised Anterior Mandibular Teeth: A Case Report.

We report the successful treatment of multiple recession type (RT) 3 gingival recessions in periodontally compromised mandibular anterior teeth with limited keratinized tissue. A 35-yearold man with stage III, grade C periodontitis underwent a two-stage intervention. Initially, a modification of the connective tissue graft (m-CTG) wall technique was used as part of phenotype modification therapy. The CTG acted as a protective 'wall,' securing space for periodontal regeneration, enhancing root coverage, soft tissue thickness, and keratinized mucosal width. Recombinant human fibroblast growth factor-2 and carbonate apatite promoted periodontal regeneration. This procedure successfully facilitated periodontal regeneration, resulting in the transition from RT3 to RT2 gingival recession and adequate keratinized mucosal width. Eighteen months later, the second surgery used a tunneled coronally advanced flap (TCAF) for root coverage. TCAF involved combining a coronally advanced flap and tunnel technique by elevating the trapezoidal surgical papilla and using a de-epithelialized CTG inserted beneath the tunneled flap. Root conditioning with ethylenediaminetetraacetic acid and enamel matrix derivative gel application were performed. Consequently, mean CAL gain was 5.3 mm, mean root coverage was 4.5 mm in height, and the gingival phenotype improved at the treated sites by the 12-month follow-up. This staged approach addresses the challenges of treating RT3 gingival recession with promising outcomes.

Alveolar Ridge Preservation With Fibro-Gide or Connective Tissue Graft: A Randomized Controlled Trial of Soft and Hard Tissue Changes.

The aim of this study was to evaluate the effectiveness of a novel biomaterial (FG) for alveolar ridge preservation compared to CTG in terms of soft tissue thickness and bone dimensional changes. A randomized clinical trial was conducted on 30 patients who required extraction of 30 hopeless mandibular posterior teeth. All patients went through atraumatic tooth extraction, and then, they were randomly allocated to either a CTG, an FG, or a spontaneous healing (SH) group (1:1:1). All patients received a dental implant placed 6 months postoperatively. The soft tissue thickness and bone dimensional changes were measured before and 6 months after the procedure. The study's analysis revealed statistically significant differences in buccal gingival thickness and dimensional bone changes across the three examined groups after 6 months (p < 0.05). The SH group had lower gingival thickness (1.31 ± 0.65 mm) and higher vertical resorption (-1.46 ± 1.67 mm at the buccal aspect) compared with the CTG and FG groups. The CTG and FG groups had similar gingival thickness (2.42 ± 0.70 and 3.00 ± 0.71 mm, respectively) and bone width reduction (+0.86 ± 2.31 and +0.93 ± 2.38 mm, respectively), whereas the CTG group had lower vertical bone loss (-0.30 ± 1.09 mm at the buccal aspect) than the FG group (-0.47 ± 2.30 mm at the buccal aspect). FG and CTG demonstrate equivalent soft tissue thickness and comparable horizontal bone dimension outcomes in ARP.

The influence of implant depth, abutment height and mucosal phenotype on peri‑implant bone levels: A 2-year clinical trial

ObjectivesTo evaluate the bone changes around equicrestal and subcrestal implants, analyzing the effect of abutment height [short abutments (SA < 2 mm) and long abutments (LA > 2 mm)] and the three components of the peri‑implant soft-tissue phenotype. MethodsTwenty-six patients received 71 implants that were placed according to supracrestal tissue height (STH) in an equicrestal (n = 17), shallow subcrestal ≈1 mm (n = 33), or deep subcrestal ≈2 mm (n = 21) position. After 3 months of healing, rehabilitation was completed using metal-ceramic crowns on multi-unit abutments of 1.5 mm, 2.5 mm, or 3.5 mm in height, depending on the prosthetic space and STH. Longitudinal clinical parameters (STH, mucosal thickness, and keratinized mucosa width) and radiographic data [bone remodelling and marginal bone loss (MBL)] were collected at 3, 6, 12, and 24 months postsurgery. ResultsThe gain in STH was significantly greater around the implants placed in a subcrestal ≈2 mm position. After 2 years, the mean change in bone remodelling in the SA group was significantly greater than in the LA group. According to the multiple linear regression, bone remodelling depends primarily on abutment height (β = -0.43), followed by crestal position (β = 0.34), and keratinized mucosa width (β = -0.22), while MBL depends on abutment height (β = -0.37), and the patient's age (β = -0.36). ConclusionsImplants placed in an equicrestal or subcrestal ≈1 mm position with LA undergo less bone remodelling, while the lowest level of MBL occurs in subcrestal ≈2 mm implants with LA. Differing soft-tissue thicknesses combined with the use of either SA or LA produced significant intergroup differences in bone remodelling and MBL. Clinical significanceAbutment height is the most powerful predictor variable affecting bone remodelling and MBL. Depending on the dimensions of the peri‑implant soft-tissue phenotype, placing the implants subcrestally may also be a viable option to decrease bone remodelling and, consequently, reduce MBL. Clinical trial registrationidentification number: NCT05670340.

Optimizing peri-implant health: The crucial role of soft tissue condition in bone regenerative procedures

Peri-implant health is paramount for the long-term success of dental implants. While bone regeneration techniques have been extensively studied and employed to ensure implant stability, the significance of soft tissue condition in this context is increasingly recognized. This review article explores the intricate interplay between soft tissue dynamics and bone regenerative procedures in the pursuit of optimal peri-implant health. Soft tissue condition around dental implants plays a multifaceted role in supporting long-term stability and functionality. Adequate soft tissue thickness, contour, and attachment are crucial for maintaining a healthy peri-implant environment and preventing complications such as peri-implantitis and mucosal recession. Furthermore, soft tissue quality influences the outcomes of bone regeneration procedures by affecting vascularization, wound healing, and tissue integration. Various strategies have been proposed to enhance soft tissue condition in conjunction with bone regenerative techniques. Through a comprehensive review of existing literature, this article aims to elucidate the pivotal role of soft tissue condition in bone regenerative procedures and its implications for long-term peri-implant health. Insights gained from this review will inform clinicians and researchers in devising effective strategies to enhance soft tissue quality and ensure the success and longevity of dental implant therapy.

Modified Roll Envelope Technique Combined With Apically Repositioned Flap (MRARF) for Peri-Implant Soft Tissue Augmentation-A Case Series.

In the present case series, we performed implant surgery using a modified roll envelope technique and an apically repositioned flap (MRARF). To improve patients' peri-implant soft tissue phenotypes, they underwent dental implantation following the buccal contour concavities, inadequate keratinized tissue width, and soft tissue thickness simultaneously. This case series includes 4 patients treated between July 2021 and February 2022 who received dental implants and guided bone regeneration treatment 6 months earlier and were to be taken up for second-stage surgery. They were eligible for the MRARF technique if each implant site showed a labial and buccal deficiency and a reduced keratinized mucosa width than the adjacent teeth. Sutures were removed 2 weeks after surgery, and a provisional restoration was delivered. A final impression was taken at 6 weeks to produce the definitive implant-supported restoration. All surgery sites healed uneventfully, and no postoperative pain or excessive swelling was reported. The modified flap design allowed for increasing the width and thickness of keratinized mucosa with a minimally invasive technique. A harmonious color, texture, and mucogingival junction position that matched the surrounding tissue and adjacent teeth was achieved, and all patients were satisfied with the final results. MRARF at second-stage implant surgery could obtain satisfactory results regarding vertical and horizontal aesthetic gingival contours and an adequate width and thickness of keratinized mucosa around the implants.

Development of a Novel Soft Tissue Measurement Device for Individualized Finite Element Modeling in Custom-Fit CPAP Mask Evaluation.

Individual facial soft tissue properties are necessary for creating individualized finite element (FE) models to evaluate medical devices such as continuous positive airway pressure (CPAP) masks. There are no standard tools available to measure facial soft tissue elastic moduli, and techniques in literature require advanced equipment or custom parts to replicate. We propose a simple and inexpensive soft tissue measurement (STM) indenter device to estimate facial soft tissue elasticity at five sites: chin, cheek near lip, below cheekbone, cheekbone, and cheek. The STM device consists of a probe with a linear actuator and force sensor, an adjustment system for probe orientation, a head support frame, and a controller. The device was validated on six ballistics gel samples and then tested on 28 subjects. Soft tissue thickness was also collected for each subject using ultrasound. Thickness and elastic modulus measurements were successfully collected for all subjects. The mean elastic modulus for each site is Ec = 53.04 ± 20.97kPa for the chin, El = 16.33 ± 8.37kPa for the cheek near lip, Ebc = 27.09 ± 11.38kPa for below cheekbone, Ecb = 64.79 ± 17.12kPa for the cheekbone, and Ech = 16.20 ± 5.09kPa for the cheek. The thickness and elastic modulus values are in the range of previously reported values. One subject's measured soft tissue elastic moduli and thickness were used to evaluate custom-fit CPAP mask fit in comparison to a model of that subject with arbitrary elastic moduli and thickness. The model with measured values more closely resembles in vivo leakage results. Overall, the STM provides a first estimate of facial soft tissue elasticity and is affordable and easy to build with mostly off-the-shelf parts. These values can be used to create personalized FE models to evaluate custom-fit CPAP masks.

Xenogeneic Collagen Matrix Versus Free Gingival Graft for Augmenting Peri-Implant Keratinized Mucosa Around Dental Implants: A Systematic Review and Meta-Analysis.

There is a growing evidence to suggest augmenting peri-implant keratinized mucosa in the presence of ≤ 2 mm of keratinized mucosa. However, the most appropriate surgical technique and augmentation materials have yet to be defined. The aim of this systematic review and meta-analyses was to evaluate the clinical and patient-reported outcomes of augmenting keratinized mucosa around implants using free gingival graft (FGG) versus xenogeneic collagen matrix (XCM) before commencing prosthetic implant treatment. Electronic databases were searched to identify observational studies comparing implant sites augmented with FGG to those augmented with XCM. The risk of bias was assessed using the Cochrane Collaboration's Risk of Bias tool. Six studies with 174 participants were included in the present review. Of these, 87 participants had FGG, whereas the remaining participants had XCM. At 6 months, sites augmented with FGG were associated with less changes in the gained width of peri-implant keratinized mucosa compared to those augmented with XCM (mean difference 1.06; 95% confidence interval -0.01 to 2.13; p = 0.05). The difference, however, was marginally significant. The difference between the two groups in changes in thickness of peri-implant keratinized mucosa at 6 months was statistically significantly in favor of FGG. On the other hand, XCM had significantly shorter surgical time, lower postoperative pain score, and higher color match compared to FGG. Within the limitation of this review, the augmentation of keratinized mucosa using FGG before the placement of the final prosthesis may have short-term positive effects on soft tissue thickness. XCM might be considered in aesthetically demanding implant sites and where patient comfortor shorter surgical time is a priority. The evidence support, however, is of low to moderate certainty; therefore, further studies are needed to support the findings of the present review.

Assessment of hard and soft tissue thickness at mandibular symphysis in skeletal Class III patients with different vertical patterns.

This study aimed to assess the bony and soft tissue parameters at mandibular symphysis among skeletal Class III patients with different vertical growth patterns, using cone-beam computed tomography (CBCT). CBCT images of 60 skeletal Class III non-growing patients were evaluated (mean age 24.9 ± 8.4 years). Study samples were classified into three facial types based on the mandibular plane angle (SN-MP angle): low, normal, and high angle. The bony and soft tissue parameters at the mandibular symphysis were evaluated. Among hard tissue variables, symphysis and pogonion width were significantly narrower in the high-angle group (P < .05). The thickness of the buccal cortex at pogonion was also significantly thinner in subjects with high angles (P < .01). Symphysis height showed an increasing tendency from the low-angle to the high-angle group. However, no significant differences were found in chin width and height according to vertical patterns. Across all soft tissue measurements, the low-angle group exhibited the highest thickness, which gradually decreased in the high-angle group. Statistically significant differences in soft tissue thickness were observed at Menton (Me) and Gnathion (Gn) (P < .05). A significant negative correlation was observed between the SN-MP angle and the thickness of both hard and soft tissues. In skeletal Class III subjects, significant differences existed in both hard and soft tissues at the mandibular symphysis, depending on the vertical patterns. These results provide a comprehensive evaluation of symphyseal area, which can aid clinicians in identifying appropriate treatment approaches, especially for combined orthognathic and orthodontic treatment.

A 3D-CBCT Volumetric Analysis of Cervical Vertebrae Angulation and Airway Dimensions

Aim: To evaluate the relationship between airway dimensions and cervical vertebrae angulations in dental patients using three-dimensional cone beam computed tomography (3D-CBCT) technology. Materials and Methods: Pre-treatment CBCT scans and cephalometric radiographs were measured for 59 patients (mean age 22±2.3yrs.) using the Dolphin3D software system (version 11.7; Dolphin Imaging &amp; Management Solutions, Chatworth, CA) to record airway dimensions and cervical vertebral angulations. All CBCT images were acquired using the same standard protocol for collection using the iCAT CBCT Unit (Imaging Sciences International, Hatfield, PA): 13cm field of view, 0.4mm voxel size, 8.9sec scan time. Intraclass Correlations (ICC) were performed on duplicate measurements of 10 CBCT scans after a two-week interval to assess reliability. P-value and Pearson correlation coefficients were used to statistically assess the relationship between vertebral angulations and airway dimensions. Results: ICC values from the reliability assessment were &gt;0.90. Pearson correlation coefficients were categorized based on confidence level as follows: high (&gt;0.75 or &lt;-0.75), moderate (0.5 to 0.74 or -0.5 to -0.74), or weak (0.3 to 0.49 or -0.3 to -0.49). No high/moderate correlations were observed. Weak correlations (p&lt;0.05) were observed between the nasopharyngeal volume and the soft tissue thickness at CV1(-0.47) and CV2(-0.34). A weak correlation was observed between the nasal cavity volume and S-N (+0.41) as well as ANS-PNS(+0.38). A weak correlation was observed between the total airway volume and the soft tissue thickness at CV2(-0.34). Conclusion: The soft tissue thickness of the posterior wall of the airway at the level of cervical vertebrae-2 appears to have a weak, negative correlation with several upper airway parameters and total airway volume. Soft tissue thickness of the posterior pharyngeal wall is crucial for dental clinicians to analyze prior to some procedures such as orthognathic surgery and orthodontic treatment that involve growth modification and jaw positioning, as it may have an association with decreased airway volume. Clinical Significance: The relationship between cervical vertebrae angulation, airway, and craniofacial morphology is a complex aspect of human anatomy. In dentistry, it is crucial that clinicians recognize the vital role cervical vertebrae angulation and airway interact in relation to craniofacial morphology. Knowledge of these interconnections will significantly inform treatment planning for multiple oral health conditions such as malocclusions, jaw discrepancies, and temporomandibular joint disorders.

Digital three-dimensional assessment of free gingival graft remodeling over 12 months

ObjectiveTo digitally evaluate the three-dimensional (3D) remodelling of FGG used to treat RT2 gingival recessions and lack of keratinized tissue on mandibular incisor teeth. MethodsData from 45 patients included in a previous multicentric RCT were analyzed. Silicone impressions were taken before (baseline) and 3, 6 and 12 months after standardized FGG placement. Casts were scanned and images were superimposed, using digital software, to obtain measurements of estimated soft tissue thickness (eTT; 1, 3, and 5 mm apical to baseline gingival margin). In addition, soft tissue volume (STV) and creeping attachment (CA) were assessed. ResultsAll patients exhibited postoperative eTT and STV increases, at all time points. The greatest mean thickness gain was observed at eTT3 (1.0 ± 0.4 mm) at 12 months. At 12 months, STV was 52.3 ± 21.1 mm3, without relevant changes compared to the 3- and 6-month follow-up. CA, which was observed as early as six months postoperatively, was evident in ∼85 % of teeth at 12 months. ConclusionsApplication of FGG was an effective phenotype modification therapy, as shown by the significantly increased tissue thickness postoperatively. Despite the use of FGG technique not aiming for root coverage, digital 3D assessment documented the early and frequent postoperative occurrence of CA, which helped improve recession treatment outcomes. Clinical SignificanceThe use of 3D assessment methodology allows precise identification of the tissue gain obtained with FGG, which, regardless of technique, results in predictable phenotype modification and frequent occurrence of creeping attachment.

Assessment of gingival translucency at the mandibular incisors with two different probing systems. A cross sectional study

ObjectivesIncreasing evidence indicates that the thickness of periodontal soft tissues plays an important role in various clinical scenarios, thus pointing to the need of further clinical research in this area. Aim of the present study was to assess gingival thickness at the mandibular incisors by translucency judgement with two different probes and to validate if these methods are comparable and applicable as diagnostic tools.Materials and methodsA total of 200 participants were included; gingival tissue thickness was measured by judging probe translucency at both central mandibular incisors, mid-facially on the buccal aspect of each tooth using a standard periodontal probe and a set of color-coded probe, each with a different color at the tip, i.e. Colorvue Biotype Probe (CBP). Frequencies and relative frequencies were calculated for probe visibility. Agreement between the standard periodontal probe and the CBP was evaluated via the kappa statistic.ResultsWhen the periodontal probe was visible, the frequency of CBP being visible was very high. Kappa statistic for the agreement between the standard periodontal probe and the CBP was 0.198 (71.5% agreement; p-value < 0.001) for tooth 41 and 0.311 (74.0% agreement; p-value < 0.001) for tooth 31, indicating a positive association of the two methods.ConclusionsAn agreement that reached 74% was estimated between the standard periodontal probe and the color-coded probe at central mandibular incisors. Clinical relevanceIn the context of the present study, the two methods of evaluating gingival thickness seem to produce comparable measurements with a substantial agreement. However, in the 1/4 of the cases, the visibility of the color-coded probe could not assist in the categorization of the gingival phenotype.

Volumetric assessment of volume stable collagen matrix in maxillary single implant site development: A randomized controlled clinical trial.

The stability of soft tissue volume around dental implants is an important factor for the final esthetic outcome. The main objective of this study was to compare volume stable collagen matrix (VCMX) versus connective tissue graft (CTG) in the augmentation of soft tissue profiles in single implant sites with a class I Siebert ridge defect. Twenty patients (14 females and 6 males) were enrolled in the present study. After implant placement and augmentation of the buccal defect by VCMX or CTG, post-operative evaluation of the volumetric changes at the augmented implant site was carried out at 3, 6, and 9 months as primary outcome, clinical and radiographic soft tissue thickness were carried out at baseline and 9-month intervals, visual analog scale (VAS) and oral health impact profile-14 (OHIP14) were recorded 2 weeks after the surgery. A statistically significant difference in soft tissue volume was found between baseline and 3, 6, and 9 months postoperatively in both groups with the highest value at 9 months (136.33 ± 86.80) (mm3) in VCMX and (186.38 ± 57.52) (mm3) in CTG. Soft tissue thickness was significantly increased in both groups at 9 months in comparison to baseline. However, there was a significantly higher increase in soft tissue thickness at 9 months in CTG (3.87 ± 0.91) than in VCMX (2.94 ± 0.31). Regarding the radiographic soft tissue thickness, there was a statistically significant increase in both groups at 9 months in comparison to baseline. However, there was a statistically higher increase in the radiographic soft tissue thickness at 9 months in CTG (3.08 ± 0.97) than in VCMX (2.37 ± 0.29). VAS showed a statistically lower value in VCMX (0.4 ± 0.7) than CTG (2.8 ± 1.48). The OHIP recorded lower values in the VCMX group than the CTG group with no statistical significance. In addition, there was no difference in the PES between the two groups. The present study showed that CTG and VCMX were both effective in soft tissue augmentation around implants in the esthetic zone. However, CTG proved more efficient in increasing peri-implant soft tissue volume and mucosal thickness around single implants at a 9-month follow-up period. VCMX was associated with less pain or discomfort and reduced patient morbidity, as reflected by the significantly reduced VAS value in the VCMX group.

Force magnitude and distribution during impacts to the hip are affected differentially by body size and body composition

Hip fractures are a severe health concern among older adults. While anthropometric factors have been shown to influence hip fracture risk, the low fidelity of common body composition metrics (e.g. body mass index) reduces our ability to infer underlying mechanisms. While simulation approaches can be used to explore how body composition influences impact dynamics, there is value in experimental data with human volunteers to support the advancement of computational modeling efforts. Accordingly, the goal of this study was to use a novel combination of subject-specific clinical imaging and laboratory-based impact paradigms to assess potential relationships between high-fidelity body composition and impact dynamics metrics (including load magnitude and distribution and pelvis deflection) during sideways falls on the hip in human volunteers.Nineteen females (<35 years) participated. Body composition was assessed via DXA and ultrasound. Participants underwent low-energy (but clinically relevant) sideways falls on the hip during which impact kinetics (total peak force, contract area, peak pressure) and pelvis deformation were measured. Pearson correlations assessed potential relationships between body composition and impact characteristics.Peak force was more strongly correlated with total mass (r = 0.712) and lean mass indices (r = 0.510–0.713) than fat mass indices (r = 0.401–0.592). Peak deflection was positively correlated with indices of adiposity (all r > 0.7), but not of lean mass. Contact area and peak pressure were positively and negatively associated, respectively, with indices of adiposity (all r > 0.49). Trochanteric soft tissue thickness predicted 59 % of the variance in both variables, and was the single strongest correlate with peak pressure. In five-of-eight comparisons, hip-local (vs. whole body) anthropometrics were more highly associated with impact dynamics.In summary, fall-related impact dynamics were strongly associated with body composition, providing support for subject-specific lateral pelvis load prediction models that incorporate soft tissue characteristics. Integrating soft and skeletal tissue properties may have important implications for improving the biomechanical effectiveness of engineering-based protective products.

Finite element analysis of hip fracture risk in elderly female: The effects of soft tissue shape, fall direction, and interventions

This study investigates the effects of fall configurations on hip fracture risk with a focus on pelvic soft tissue shape. This was done by employing a whole-body finite element (FE) model. Soft tissue thickness around the pelvis was measured using a standing CT system, revealing a trend of increased trochanteric soft tissue thickness with higher BMI and younger age. In the lateroposterior region from the greater trochanter, the soft tissues of elderly females were thin with a concave shape. Based on the THUMS 5F model, an elderly female FE model with a low BMI was developed by morphing the soft tissue shape around the pelvis based on the CT data. FE simulation results indicated that the lateroposterior fall led to a higher femoral neck force for the elderly female model compared to the lateral fall. One reason may be related to the thin soft tissue of the pelvis in the lateroposterior region. Additionally, the effectiveness of interventions that can help mitigating hip fractures in lateroposterior falls on the thigh-hip and hip region was assessed using the elderly female model. The attenuation rate of the femoral neck force by the hip protector was close to zero in the thigh-hip fall and high in the hip fall, whereas the attenuation rate of the compliant floor was high in both falls. This study highlights age-related changes in the soft tissue shape of the pelvis in females, particularly in the lateroposterior regions, which may influence force mitigation for the hip joint during lateroposterior falls.