Soft Lines Research Articles

Review of the Anti-Candida albicans Activity and Physical Properties of Soft Lining Materials Modified with Polyene Antibiotics, Azole Drugs, and Chlorohexidine Salts.

This review examined the current state of knowledge on the modifications of commercial soft lining materials (SLMs) with a variety of antifungal compounds: (i) polyene antibiotics, including nystatin and amphotericin B, (ii) azole drugs, including fluconazole, itraconazole, clotrimazole, ketoconazole, and miconazole, and (iii) antiseptics, including chlorhexidine salts to give them anti-Candida albicans properties. The effect of such modifications on the SLMs' physical properties, such as drug release, water sorption, surface properties, bond strength, tensile strength, and hardness, was also analyzed. In effect, this study provided a unique compilation of research results obtained for numerous properties of SLM modified with antifungal compounds that differ in their chemical structure and mechanism of antifungal action. These results might also be useful for prosthetic dentistry, where SLMs are used to prevent and treat candidiasis, the most common disease among denture wearers.

Removable dental prostheses for patients with Sjögren's syndrome

Sjögren's syndrome (SS) is a chronic autoimmune condition primarily affecting the salivary and lacrimal glands, leading to pronounced dry mouth (xerostomia) and dry eyes. These symptoms create unique challenges for SS patients requiring removable dental prostheses, as the lack of saliva significantly impacts the retention, comfort, and overall effectiveness of these devices. Without adequate saliva, prosthetic retention diminishes, and patients frequently experience issues such as mucosal irritation and increased susceptibility to infections. To address these issues, tailored material choices are critical in designing effective prosthetic solutions. Soft liners, moisture-retentive acrylics, and antimicrobial coatings are among the innovations improving both retention and comfort for SS patients. The aesthetic and functional outcomes of prosthetic solutions are also essential considerations. Enhanced retention mechanisms, such as implant-supported overdentures, not only improve masticatory performance but also aid in preserving the patient’s facial profile and lip support. Advanced materials offering translucency and color stability contribute to a more natural appearance, which is critical for patient satisfaction. The maintenance of these prostheses requires specific care routines to mitigate microbial buildup and tissue irritation. Specialized cleaning agents and salivary substitutes help maintain hygiene and reduce discomfort, while regular follow-up visits enable timely adjustments to accommodate tissue changes and extend the prosthesis lifespan. Implementing a comprehensive approach that considers material selection, functional and aesthetic outcomes, and maintenance strategies can greatly enhance the quality of life for SS patients. By understanding and addressing the specific needs associated with xerostomic conditions, dental professionals can provide prosthetic solutions that offer both reliability and comfort in this challenging context. Regular patient education and diligent care routines remain essential to ensure the long-term success and durability of removable dental prostheses for individuals with SS.

High-Visibility Edge-Highlighting Visualization of 3D Scanned Point Clouds Based on Dual 3D Edge Extraction

Recent advances in 3D scanning have enabled the digital recording of complex objects as large-scale point clouds, which require clear visualization to convey their 3D shapes effectively. Edge-highlighting visualization is used to improve the comprehensibility of complex 3D structures by enhancing the 3D edges and high-curvature regions of the scanned objects. However, traditional methods often struggle with real-world objects due to inadequate representation of soft edges (i.e., rounded edges) and excessive line clutter, impairing resolution and depth perception. To address these challenges, we propose a novel visualization method for 3D scanned point clouds based on dual 3D edge extraction and opacity–color gradation. Dual 3D edge extraction separately identifies sharp and soft edges, integrating both into the visualization. Opacity–color gradation enhances the clarity of fine structures within soft edges through variations in color and opacity, while also creating a halo effect that improves both resolution and depth perception of the visualized edges. Computation times required for dual 3D edge extraction are comparable to conventional binary statistical edge-extraction methods. Visualizations with opacity–color gradation are executable at interactive rendering speeds. The effectiveness of the proposed method is demonstrated using 3D scanned point cloud data from high-value cultural heritage objects.

Biting force evaluation in completely edentulous patients with a thermoplastic denture versus conventional heat cured resin denture relined with soft liner.

Biting force evaluation in completely edentulous patients with a thermoplastic denture versus conventional heat cured resin denture relined with soft liner.

The influence of flowering periods on productivity characteristics in breeding samples of soft winter wheat created with the involvement of western european ecotypes

Aim. To determine the nature of the influence of flowering periods on productivity traits in soft winter wheat lines, which were created with the involvement of late-ripening samples of the Western European ecotype. Methods. Research methods are field, laboratory, selection-genetic, statistical. Results. The nature of the manifestation of the "date of flowering" trait in hybrids F1-F3 and selection numbers selected from hybrid populations with the participation of Western European ecotypes of soft winter wheat, the correlation dependence of the date of flowering, grain yield, ear length and the duration of the "flowering-maturity" period were established. Optimums for the manifestation of indicators that determined high yield and ear length were established. Conclusions. For each hybrid population created with the participation of parental components contrasting in duration of vegetation, it is necessary to develop a specific selection plan taking into account intra-population correlations of yield, flowering dates and the duration of the "flowering-maturity" period.

Bioinspired Design of 3D-Printed Cellular Metamaterial Prosthetic Liners for Enhanced Comfort and Stability.

Traditional prosthetic liners are often limited in customization due to constraints in manufacturing processes and materials. Typically made from non-compressible elastomers, these liners can cause discomfort through uneven contact pressures and inadequate adaptation to the complex shape of the residual limb. This study explores the development of bioinspired cellular metamaterial prosthetic liners, designed using additive manufacturing techniques to improve comfort by reducing contact pressure and redistributing deformation at the limb-prosthesis interface. The gyroid unit cell was selected due to its favorable isotropic properties, ease of manufacturing, and ability to distribute loads efficiently. Following the initial unit cell identification analysis, the results from the uniaxial compression test on the metamaterial cellular samples were used to develop a multilinear material model, approximating the response of the metamaterial structure. Finite Element Analysis (FEA) using a previously developed generic limb-liner-socket model was employed to simulate and compare the biomechanical behavior of these novel liners against conventional silicone liners, focusing on key parameters such as peak contact pressure and liner deformation during donning, heel strike, and the push-off phase of the gait cycle. The results showed that while silicone liners provide good overall contact pressure reduction, cellular liners offer superior customization and performance optimization. The soft cellular liner significantly reduced peak contact pressure during donning compared to silicone liners but exhibited higher deformation, making it more suitable for sedentary individuals. In contrast, medium and hard cellular liners outperformed silicone liners for active individuals by reducing both contact pressure and deformation during dynamic gait phases, thereby enhancing stability. Specifically, a medium-density liner (10% infill) balanced contact pressure reduction with low deformation, offering a balance of comfort and stability. The hard cellular liner, ideal for high-impact activities, provided superior shape retention and support with lower liner deformation and comparable contact pressures to silicone liners. The results show that customizable stiffness in cellular metamaterial liners enables personalized design to address individual needs, whether focusing on comfort, stability, or both. These findings suggest that 3D-printed metamaterial liners could be a promising alternative to traditional prosthetic materials, warranting further research and clinical validation.

Evaluation of Tensile Bond Strength of Nanoparticle Reinforced Soft Liner Materials: A Pilot Study

OBJECTIVE: The aim of this study is to evaluate the tensile bond strength between polymethyl methacrylate (PMMA) surfaces and autopolymerized silicon-based soft lining materials with 1% w/w Titanium dioxide (TiO2) and Hydroxyapatite (HA) nanoparticles added. MATERIALS AND METHODS: For the tensile test, 60 pieces of acrylic (Meliodent, Bayer Dental, Newbury, England) samples of 30 × 10 × 10 mm3 dimensions were prepared using metal molds. Acrylic surfaces were sanded with silicon carbide sandpapers of 500, 1000, 1500, and 2000 grids to ensure standardization. After the samples were placed back in the metal mold, adhesive (Detax, Germany) was applied to the surfaces that would come into contact with the soft lining. Soft lining materials (Mollosil, Detax, Ettlingen, Germany) to which 1% by weight TiO2 and 1% HA nanoparticles were added were polymerized by placing them between two acrylic blocks. For the tensile test, a total of 30 samples were obtained, with 10 samples in each group (n=10). The specimens were placed on the holder end of the universal test device and force was applied until failure occurred. RESULTS: The tensile bond strength (0,86 ± 0,21 MPa) in the TiO2 nanoparticle-added group was found to be significantly higher than the control group (0,65 ± 0,14 MPa) (p<0.05). There is no significant difference between the control group and the HA nanoparticle-added group (0.65 ± 0.1 MPa) (p˃0.05). CONCLUSION: It was observed that the addition of nanoparticles increased the tensile strength. However, further studies are needed to evaluate the effect of nanoparticle addition on other mechanical and physical properties of soft liners.

Revealing the burning and soft heart of the bright bare active galactic nucleus ESO 141-G55: X-ray broadband and SED analysis

Context. ESO 141-G55 is a nearby X-ray bright broad-line Seyfert 1 (BLS1) that has been classified as a bare active galactic nucleus (AGN) due to a lack of warm absorption along its line of sight, providing an unhampered view into its disc-corona system. Aims. We aim to probe its disc-corona system thanks to the first simultaneous XMM-Newton and NuSTAR observation obtained October 1–2, 2022. Methods. We carried out an X-ray broadband spectral analysis to determine the dominant process(es) at work as well as a spectral energy distribution (SED) analysis to determine the disc-corona properties. Results. The simultaneous broadband X-ray spectrum of ESO 141-G55 is characterised by the presence of a prominent smooth soft X-ray excess, a broad Fe Kα emission line, and a significant Compton hump. The high-resolution reflection grating spectrometer spectra confirmed the lack of intrinsic warm-absorbing gas along our line of sight in the AGN rest frame, verifying that it is still in a bare state. However, soft X-ray emission lines were observed, indicating substantial warm gas out of our line of sight. The intermediate inclination of the disc-corona system (∼43°) may offer us a favourable configuration to observe ultra-fast outflows from the disc, but none were found in this 2022 observation, contrary to a previous 2007 XMM-Newton one. We ruled out relativistic reflection alone on a standard disc based on the X-ray broadband analysis, while a combination of soft and hard Comptonisation by a warm and hot corona (RELAGN) plus relativistic reflection (REFLKERRD) reproduces the ESO 141-G55 SED quite well. The hot corona temperature is very hot, ∼140 keV, and much higher than about 80% of AGNs, whereas the warm corona temperature, ∼0.3 keV, is similar to the values found in other sub-Eddington AGNs. ESO 141-G55 is accreting at a moderate Eddington accretion rate (∼10–20%). Conclusions. Our analysis points to a significant contribution of an optically thick warm corona to both the soft X-ray and UV emission in ESO 141-G55, adding to the growing evidence that the accretion of AGNs (even at a moderate accretion rate) appears to deviate from standard disc theory.

X-ray polarization measurement of the gold standard of radio-quiet active galactic nuclei: NGC 1068

Context. NGC 1068 is the most observed radio-quiet active galactic nucleus (AGN) in polarimetry, yet its high-energy polarization has never been probed before due to a lack of dedicated polarimeters. Aims. Using the first X-ray polarimeter sensitive enough to measure the polarization of AGNs, we want to probe the orientation and geometric arrangement of (sub)parsec-scale matter around the X-ray source. Methods. We used the Imaging X-ray Polarimetry Explorer (IXPE) satellite to measure, for the first time, the 2–8 keV polarization of NGC 1068. We pointed IXPE at the target for a net exposure time of 1.15 Ms, in addition to using two Chandra snapshots of ∼10 ks each in order to account for the potential impact of several ultraluminous X-ray sources (ULXs) within IXPE’s field of view. Results. We measured a 2–8 keV polarization degree of 12.4% ± 3.6% and an electric vector polarization angle of 101° ± 8° at a 68% confidence level. If we exclude the spectral region containing bright Fe K lines and other soft X-ray lines where depolarization occurs, the polarization fraction rises to 21.3% ± 6.7% in the 3.5–6.0 keV band, with a similar polarization angle. The observed polarization angle is found to be perpendicular to the parsec-scale radio jet. Using a combined Chandra and IXPE analysis plus multiwavelength constraints, we estimated that the circumnuclear “torus” may sustain a half-opening angle of 50–55° (from the vertical axis of the system). Conclusions. Thanks to IXPE, we have measured the X-ray polarization of NGC 1068 and found comparable results, both in terms of the polarization angle orientation with respect to the radio jet and the torus half-opening angle, to the X-ray polarimetric measurement achieved for the other archetypal Compton-thick AGN: the Circinus galaxy. Probing the geometric arrangement of parsec-scale matter in extragalactic objects is now feasible thanks to X-ray polarimetry.

In vitro analysis of a novel dimethylaminododecyl methacrylate modification of dental acrylic soft liner material

Soft denture liners have limitations like short lifespan and increased microbial buildup. Despite promise as a non-leaching antimicrobial polymer in dentistry, the impact of dimethylaminododecyl methacrylate (DMADDM) on soft liner performance remains unexplored. This study aimed to evaluate the effect of integrating different concentrations of DMADDM to cold cure acrylic resin soft liner, on its antimicrobial activity, cytotoxicity, and physical properties. The same properties were compared to a conventional commercially available denture soft liner. The study employed a control group (conventional soft liner) and three test groups containing 3.3%, 6.6%, and 10% (total mass fraction) DMADDM, respectively. Antimicrobial activity against Candida albicans and Streptococcus mutans was assessed through colony counts and biofilm biomass. Cytotoxicity was evaluated using an oral epithelial cell line. Additionally, wettability and hardness were measured to assess physical properties. Incorporation of DMADDM significantly reduced Candida albicans and Streptococcus mutans counts, and biofilm biomass, compared to the control. Additionally, DMADDM improved the soft liner's wettability and mitigated long-term hardness increase. In conclusion, DMADDM holds promise in enhancing soft liner performance. However, careful selection of its optimum concentration is crucial to ensure both safety and efficacy for future clinical use.

Association of LSMx and LIMd Angles With Cephalometric Dental and Soft Tissue Parameters of Incisor Proclination and Lip Protrusion.

Soft tissue analysis can be used to assess anatomical features but may or may not accurately correlate with underlying hard tissue morphology, leading to an incorrect perception of malocclusion. This study aimed to assess the reliability of different soft tissue reference lines used to evaluate anteroposterior lip position and the position of incisors and malocclusion and compare it with those assessed via hard tissue angles (LSMx and LIMd) and determine if they are true indicators of underlying protrusion of incisors and malocclusion. A total of 120 pre-treatment lateral cephalometric radiographs were selected where patients were 18-30 years old, diagnosed as Skeletal Class I, II (Division 1 and 2), and III malocclusion. The measurements taken were SN to point A angle (SNA), SN to point B angle (SNB), angle between point A and point B (ANB), upper incisor to SN plane angle (UI-SN), upper incisor to palatal plane angle (UI-PP), incisor mandibular plane angle (IMPA), Ricketts' E line, Sushner's S2 line, nasolabial (NL) angle, mentolabial (ML) angle, LSMx angle, and LIMd angle. In the Class I malocclusion group, when the upper lip was assessed, the distribution of UI-SN, UI-PP, E line to UL, S line to UL, NL angle, and LMax was significantly different statistically (p=0.000), though the assessment of lower variables in Class I malocclusion showed the distribution of IMPA, E line to UL, S line to UL, ML angle, and LMand angle has a statistically significant difference (p=0.007). In Class II Division 2 malocclusion, a significant difference was observed for the upper variables (p=0.000), whereas the distribution of lower values was the same across all the variables (p=0.0724). In the sample of Class III malocclusion, a significant correlation was found in the upper variables, while the distribution among lower variables did not show any significant difference (p=0.211). This study indicates that the upper and lower soft tissue correlation with hard tissue variables is reliable for some variables but not throughout for all. Soft tissue analysis (under study) can be used to assess disproportion, but it fails to correlate to the underlying hard tissue morphology and does not explain the correct malocclusion. Further studies based on 3D diagnosis to formulate a close relationship are encouraged that can help assess soft and hard tissue patterns consistent with one another.

Comparison of Tensile Bond Strength of Soft Denture Liner Material on Denture Base Resins

Aim: This study aims to evaluate the tensile bond strength (TBS) of a silicone-based soft denture liner material on denture bases produced via conventional, subtractive, and additive manufacturing techniques and examine the effect of aluminum oxide particle abrasion (APA) on TBS. Material and Methods: A total of 48 cylindrical denture base resin samples were manufactured using three different techniques: conventional, subtractive, and additive manufacturing. The samples were divided into two groups: control and APA. All samples were separated at the center, and the soft liner was applied to the corresponding surfaces. The specimens then underwent TBS testing. Data were analyzed using Two-way ANOVA and Bonferroni post hoc tests. Results: Two-way ANOVA results indicated a significant difference among the denture base resins, while no significant difference was found between the control and APA groups. The highest TBS was observed in the subtractive-manufactured APA group, while the lowest TBS was in the additive-manufactured APA group. Significant differences were found between the subtractive and additive-manufactured groups (p=0.022). Conclusion: This study demonstrates that TBS varies with the DB's manufacturing technique. While APA increased TBS in subtractive manufacturing, it had no statistically significant effect. Further research should explore different soft lining materials and consider in vivo conditions for more comprehensive insights.

Characterization of nanoceria-modified silicone soft liners: Surface morphology, hardness, wettability, cytotoxicity, and antifungal properties in artificial saliva – An in vitro study

Statement of problemSoft liners are essential for denture wearers, which aids in the healing of soft tissue injuries caused by rough denture base surfaces. Silicone soft liners, while effective, can accumulate biofilm over time, necessitating enhancement. PurposeThis in vitro study aimed to assess the efficacy of silicone soft liners incorporating varying concentrations of cerium oxide nanoparticles. Materials and methodsA stainless-steel die as per ISO standard 10139-2-2018 (35 × 6 mm), Using G*Power 3.0.10 software, 400 samples were prepared with 95 % confidence interval and 80 % power. Samples were divided into five groups: surface morphology (Group A), surface hardness (Group B), wettability (Group C), cytotoxicity (Group D), and antifungal property (Group E). Each group was subdivided based on cerium oxide nanoparticle concentrations. Samples were stored in artificial saliva until evaluation. Surface morphology was examined via scanning electron microscopy (SEM), surface hardness using Shore A Durometer, wettability by drop shape analysis, cytotoxicity via MTT assay, and antifungal properties using crystal violet staining.Data were assessed for normal distribution using Kolmogorov-Smirnov and Shapiro-Wilk tests. ResultsSEM analysis showed optimal nanoparticle dispersion in Group A2(0.25 %) and A3 (0.5 %). Group B2 (0.25 %) exhibited the lowest mean surface hardness, decreasing from day 1 to day 30. Group C3 demonstrated the most hydrophobic surface across days. Group D2 exhibited the least cytotoxicity at all time intervals. Group E4 displayed the highest antifungal activity. ConclusionWithin study limitations, silicone soft liners modified with 0.25 % and 0.5 % cerium oxide nanoparticles exhibited superior properties in surface hardness and cytotoxicity. Optimal surface morphology and wettability were observed with 0.5 % concentration, while antifungal efficacy peaked at 1 %. These findings suggest clinical potential for treating damaged oral tissues. Clinical implicationsSoft liners modified with 0.25 % and 0.5 % cerium oxide nanoparticles may benefit patients with oral tissue abuse, offering enhanced therapeutic properties.

EROSITA narrowband maps at the energies of soft X-ray emission lines

Hot plasma plays a crucial role in regulating the baryon cycle within the Milky Way, flowing from the energetic sources in the Galactic center and plane, to the corona and the halo. This hot plasma represents an important fraction of the Galactic baryons, plays a key role in galactic outflows and is an important ingredient in galaxy evolution models. Taking advantage of the Spectrum-Roentgen-Gamma (SRG first all-sky survey (eRASS1), in this work our aim is to provide a panoramic view of the hot circumgalactic medium (CGM) of the Milky Way. Compared to the previous all-sky X-ray survey performed by ROSAT, the improved energy resolution of enabled us to map, for the first time, the sky within the narrow energy bands characteristic of soft X-ray emission lines. These lines provide essential information on the physical properties of the hot plasma. Here we present the eRASS1\ half sky maps in narrow energy bands corresponding to the most prominent soft X-ray lines and which allowed us to constrain the distribution of the hot plasma within and surrounding the Milky Way. We corrected the maps by removing the expected contribution associated with the cosmic X-ray background, the time-variable solar wind charge exchange, and the local hot bubble. We applied corrections to mitigate the effect of absorption, therefore highlighting the emission from the CGM of the Milky Way. We used the line ratio of the oxygen lines as a proxy to constrain the temperature of the warm-hot CGM, and we defined a pseudo-temperature $ T $ map. The map highlights how different regions are dominated by different thermal components. Toward the outer halo, the temperature distribution of the CGM on angular scales of 2--20 deg is consistent with being constant $ T T 4<!PCT!>$ with a marginal detection of $ T T = 2.7 <!PCT!> 0.2<!PCT!>$ (statistical) $ 0.6<!PCT!>$ (systematic) in the southern hemisphere. Instead significant variations of $ 12<!PCT!>$ are observed on scales of many tens of degrees when comparing the northern and southern hemispheres. The pseudo-temperature map shows significant variations across the borders of the bubbles, suggesting temperature variations, possibly linked to shocks, between the interior of the Galactic outflow and the unperturbed CGM. In particular, a shell characterized by a lower line ratio appears close to the edge of the bubbles.

Impact of surface treatment and addition of CuO NPs of surface roughness of acrylic denture base bonded to soft liner

Background: The import of the rough surface makes the application of several elements to enhance this feature vital for the adhesion of soft liners. Aim: The study's goal was to to ascertain the impact of copper oxide nanoparticles added in two ratios to heated-cured acrylic resin and fiber laser surface treatment on surface roughness. Materials and methods:60 acrylic specimens in the shape of discs were manufactured and divided into three groups: one received no addition; the other two received the addition of 0.3% CuO NPs; and a third group that received the addition of 0.5% CuO NPs. Each group was divided into two categories: those that were laser treatment and those who did not. The surface roughness test was then examined using a roughness tester called a profilometer. Results: The average roughness values were high for the control groups and low for the CuO NPs 0.5% groups. The mean values in the laser-treated groups had greater roughness than the control groups, according to the laser application.Conclusion:. As the fraction of CuO NPs increased, the surface roughness reduced. The laser treatment also reduced surface roughness.

Influence of Some Plant Extracts on Antifungal Properties, Hardness, and Peel Bond Strength of Heat-Cured Denture Soft Liner

Background: Soft liners in dentures play a crucial role in enhancing patient comfort and preventing tissue irritation especially for patients with resorbed ridges. However, microbial colonization presents a challenge to their long-term effectiveness, particularly Candida albicans, leading to conditions like denture-induced stomatitis. Objective: To evaluate the antimicrobial efficacy and mechanical properties of heat cured soft liners incorporating plant extracts from Olea europaea and Ficus carcia, individually and synergistically. Patients and Methods: Extracts were obtained through Soxhlet extraction, and their antimicrobial activity against Candida albicans was determined using the broth microdilution method. Soft liner specimens were prepared with varying concentrations of the extracts and subjected to disk diffusion tests, shore A hardness measurements, and peel bond strength tests. Statistical analysis involved the use of one-way ANOVA and Dunnett tests. Results: Results demonstrated significant antimicrobial activity, with the synergistic mixture exhibiting the highest inhibition zone against Candida albicans. Moreover, the addition of such extracts led to increased shore A hardness, with the highest levels recorded for synergistic groups. The extracts also displayed a significant decrease in peel bond strength, indicating potential challenges in adhesive properties. These findings suggest that while individual extracts show promise in antimicrobial efficacy and mechanical reinforcement of soft liners, their combination may lead to compromised adhesive properties. Conclusion: The study contributes valuable insights into the development of antimicrobial soft liners reinforced with Olea europaea and Ficus carcia extracts, advancing dental materials towards improved patient outcomes and enhanced oral health. Keywords: Soft liner, Olea europaea, Ficus carcia, Disk diffusion, Compressive strength.

Influence of Some Plant Extracts on Antifungal Properties, Hardness, and Peel Bond Strength of Heat-Cured Denture Soft Liner

Background: Soft liners in dentures play a crucial role in enhancing patient comfort and preventing tissue irritation especially for patients with resorbed ridges. However, microbial colonization presents a challenge to their long-term effectiveness, particularly Candida albicans, leading to conditions like denture-induced stomatitis. Objective: To evaluate the antimicrobial efficacy and mechanical properties of heat cured soft liners incorporating plant extracts from Olea europaea and Ficus carcia, individually and synergistically. Patients and Methods: Extracts were obtained through Soxhlet extraction, and their antimicrobial activity against Candida albicans was determined using the broth microdilution method. Soft liner specimens were prepared with varying concentrations of the extracts and subjected to disk diffusion tests, shore A hardness measurements, and peel bond strength tests. Statistical analysis involved the use of one-way ANOVA and Dunnett tests. Results: Results demonstrated significant antimicrobial activity, with the synergistic mixture exhibiting the highest inhibition zone against Candida albicans. Moreover, the addition of such extracts led to increased shore A hardness, with the highest levels recorded for synergistic groups. The extracts also displayed a significant decrease in peel bond strength, indicating potential challenges in adhesive properties. These findings suggest that while individual extracts show promise in antimicrobial efficacy and mechanical reinforcement of soft liners, their combination may lead to compromised adhesive properties. Conclusion: The study contributes valuable insights into the development of antimicrobial soft liners reinforced with Olea europaea and Ficus carcia extracts, advancing dental materials towards improved patient outcomes and enhanced oral health.

Evaluation of Peel Bond Strength between Heat Cured Acrylic Based Denture Soft Lining Material and Heat Polymerized Acrylic after Different Acrylic Surface Treatment Methods

Evaluation of Peel Bond Strength between Heat Cured Acrylic Based Denture Soft Lining Material and Heat Polymerized Acrylic after Different Acrylic Surface Treatment Methods

Comparison of Dimensional Accuracy of (Pmma) Denture Base Material Relined with Molloplast B Soft Liner by Different Curing Methods.

Background and objectives: The most common problem associated with the complete denture is the loss of retention after period of time therefore relining procedure is important in many cases, this study was done to compare the dimensional accuracy of PMMA before and after the application of Molloplast B Soft liner to the denture base material by different curing methods. Methods: A total of 80 PMMA samples were used in this study, 40 (SR Triplex hot) PMMA samples polymerized in water bath, 40 (Acron MC) PMMA samples polymerized in microwave, Molloplast B soft liner (Detax, Germany) were packed between each two PMMA strip as overlap joint and cured by water bath and microwave, the dimensional accuracy of PMMA samples were measured before and after the Molloplast B soft liner application using the (DOF scan app) software device. Results: The results showed that the dimensional accuracy of SR Triplex hot water bath polymerized PMMA samples experienced significant dimensional change after the application of Molloplast B soft liner, while in Acron MC microwave polymerized PMMA samples, non-significant dimensional changes were observed after Molloplast B soft liner application. Conclusion: Microwave polymerized PMMA samples showed better dimensional accuracy than the water bath polymerized PMMA samples after the addition of Molloplast B Softliner. Keywords; PMMA, Soft Liner, Microwave, Water Bath.

Impact of Cerium Oxide Nanoparticles Incorporation on Water Sorption and Solubility of Acrylic-Based Denture Soft Lining Material

Denture soft liners are specifically engineered to enhance patient performance by altering the surfaces of prosthetics that come into touch with the soft tissues within the oral cavity. Acrylic resin Polymethyl methacrylate (PMMA) based and silicone elastomer-based are the two main types of denture soft liners. Nanotechnology was employed as a means to enhance the mechanical qualities of dentures. The primary objective of this investigation was to examine the impact of cerium oxide (CeO2) nanoparticles (NPs) on the water sorption and solubility characteristics of acrylic-based soft liners. The data was subjected to analysis of variance (ANOVA). The surface characteristics were determined using scanning electron microscopy (SEM). This in vitro study demonstrates that including CeO2 NPs at 2% and 3% concentrations does not impact acrylic-based soft lining materials' water sorption and solubility. The solubility of CeO2 is well-recognized to be very low. The results indicated that there were no statistically significant differences between the groups.