Sodium Dodecyl Sulfate Research Articles

Preparing a microemulsion-loaded hydrogel for cleaning wall paintings and coins

Removing unwanted materials, such as organic coatings and soil, from the cultural relic surface is a complex and significant task in the field of cultural heritage conservation. Microemulsion-loaded gel can effectively and safely remove those organic coatings and soil. Here, we employed a simple solvent exchange strategy to prepare a microemulsion-loaded polyvinyl alcohol/polyethyleneimine (PVA/PEI) hydrogel. First, PVA and PEI were dissolved into DMSO to form a gel. Then, the gel was immersed into a microemulsion composed of water, ethyl acetate, propylene carbonate, sodium dodecyl sulfate, and 1-pentanol to exchange DMSO. Microemulsion-loaded PVA/PEI hydrogel can be synthesized by completely substituting DMSO. To investigate the microstructure, rheological properties, and mechanical properties of the gel, scanning electron microscopy, a rheometer, and a universal testing machine were used, respectively. Fourier transform infrared (FT-IR) analysis was conducted to explore the synthesis mechanism and confirm the successful loading of microemulsion within the microemulsion-loaded PVA/PEI hydrogel. Furthermore, FT-IR, a depth-of-field microscope, and a glossmeter were utilized to evaluate the cleaning efficiency of the microemulsion-loaded PVA/PEI hydrogel for removing animal glue and soil from the surfaces of cultural relics. Moreover, an X-ray fluorescence spectrometer was used to analyze the element component of the ancient coin. The application results showed that the microemulsion-loaded PVA/PEI hydrogel can effectively remove animal glue from an ancient wall painting surface. Moreover, it is capable of removing soil from an ancient coin surface as well, which helped to confirm the age of the coin. This offers a novel method to prepare microemulsion-loaded hydrogel and demonstrates great potential in the cleaning for cultural heritage.

Diffusiophoretic Transport of Charged Colloids in Ionic Surfactant Gradients Entirely below versus Entirely above the Critical Micelle Concentration.

When placed in an ionic surfactant gradient, charged colloids will undergo diffusiophoresis at a velocity, uDP = MDP∇ ln S, where MDP is the diffusiophoretic mobility and S is the surfactant concentration. The diffusiophoretic mobility depends in part on the charges and diffusivities of the surfactants and their counterions. Since micellization decreases surfactant diffusivity and alters charge distributions in a surfactant solution, MDP of charged colloids in ionic surfactant gradients may differ significantly when surfactant concentrations are above or below the critical micelle concentration (CMC). The role of micelles in driving diffusiophoresis is unclear, and a previously published model that accounts for micellization suggests the possibility of a change in the sign of MDP above the CMC [Warren, P. B.; . Soft Matter 2019, 15, 278-288]. In the current study, microfluidic channels were used to measure the transport of negatively charged polystyrene colloids in sodium dodecyl sulfate (SDS) surfactant gradients established at SDS concentrations that are either fully above or fully below the CMC. Interpretation of diffusiophoresis was aided by measurements of the colloid electrophoretic mobility as a function of SDS concentration. A numerical transport model incorporating the prior diffusiophoretic mobility model for ionic surfactant gradients was implemented to elucidate signatures of positive and negative diffusiophoretic mobilities and compare with experiments. The theoretically predicted sign of the diffusiophoretic mobility below the CMC was determined to be particularly sensitive to uncertainty in colloid and surfactant properties, while above the CMC, the mobility was consistently predicted to be positive in the SDS concentration range considered in the experiments conducted here. In contrast, experiments only showed signatures of a negative diffusiophoretic mobility for these negatively charged colloids with no change of sign. Colloid diffusiophoretic transport measured in micellar solutions was more extensive than that below the CMC with the same ∇ ln S.

Development of PCR-based markers for identification of wheat HMW glutenin Glu-1Bx and Glu-1By alleles

BackgroundIn common wheat (Triticum aestivum L.), allelic variations in the high-molecular-weight glutenin subunits Glu-B1 locus have important effects on grain end-use quality. The Glu-B1 locus consists of two tightly linked genes encoding x- and y-type subunits that exhibit highly variable frequencies. However, studies on the discriminating markers of the alleles that have been reported are limited. Here, we developed 11 agarose gel-based PCR markers for detecting Glu-1Bx and Glu-1By alleles.ResultsBy integrating the newly developed markers with previously published PCR markers, nine Glu-1Bx locus alleles (Glu-1Bx6, Glu-1Bx7, Glu-1Bx7*, Glu-1Bx7OE, Glu-1Bx13, Glu-1Bx14(−), Glu-1Bx14(+)/Bx20, and Glu-1Bx17) and seven Glu-1By locus alleles (Glu-1By8, Glu-1By8*, Glu-1By9, Glu-1By15/By20, Glu-1By16, and Glu-1By18) were distinguished in 25 wheat cultivars. Glu-1Bx6, Glu-1Bx13, Glu-1Bx14(+)/Bx20, Glu-1By16, and Glu-1By18 were distinguished using the newly developed PCR markers. Additionally, the Glu-1Bx13 and Glu-1Bx14(+)/Bx20 were distinguished by insertions and deletions in their promoter regions. The Glu-1Bx6, Glu-1Bx7, Glu-1By9, Glu-1Bx14(−), and Glu-1By15/By20 alleles were distinguished by using insertions and deletions in the gene-coding region. Glu-1By13, Glu-1By16, and Glu-1By18 were dominantly identified in the gene-coding region. We also developed a marker to distinguish between the two Glu-1Bx14 alleles. However, the Glu-1Bx14(+) + Glu-1By15 and Glu-1Bx20 + Glu-1By20 allele combinations could not be distinguished using PCR markers. The high-molecular-weight glutenin subunits of wheat varieties were analyzed by ultra-performance liquid chromatography and sodium dodecyl sulfate–polyacrylamide gel electrophoresis, and the findings were compared with the results of PCR analysis.ConclusionsSeven Glu-1Bx and four Glu-1By allele detection markers were developed to detect nine Glu-1Bx and seven Glu-1By locus alleles, respectively. Integrating previously reported markers and 11 newly developed PCR markers improves allelic identification of the Glu-B1 locus and facilitates more effective analysis of Glu-B1 alleles molecular variations, which may improve the end-use quality of wheat.

Surfactant Effects in Porous Electrodes for Microemulsion Redox Flow Batteries

Abstract The effect of surfactant additives on electrochemical behavior in porous electrodes was investigated using vanadium redox flow battery half-cells and the dependence of volumetric kinetics and mass transport on electrolyte, surfactant, and electrode type was explored. Without surfactant added, carbon paper electrodes demonstrated greater kinetics and transport compared to carbon felt, for a given electrolyte. Additionally, posolyte kinetics are greater than negolyte kinetics by one to three orders of magnitude, depending on the electrode type. Addition of surfactant increased electrode wettability and possibly electrochemical surface area. However, this was accompanied by a decrease in volumetric mass transport, due to stronger electrolyte-electrode interactions. The presence of sodium dodecyl sulfate (SDS) influenced posolyte and negolyte kinetics differently. Kinetics showed a dependence on electrode type and surfactant. On carbon felt, volumetric kinetics decreased for both posolyte and negolyte with SDS addition. On carbon paper, SDS decreased volumetric kinetics for the posolyte but increased (>2X) kinetics for the negolyte! This kinetic enhancement depends on surfactant chemistry: cetyltrimethylammonium bromide, a cationic surfactant, failed to increase kinetics. Furthermore, SDS did not increase areal specific resistance. These findings show the superior performance of carbon paper compared to carbon felt and suggest SDS as a possible VRFB negolyte additive

A pseudo-surfactant chemical permeation enhancer to treat otitis media via sustained transtympanic delivery of antibiotics.

Chemical permeation enhancers (CPEs) represent a prevalent and safe strategy to enable non-invasive drug delivery across skin-like biological barriers such as the tympanic membrane (TM). While most existing CPEs interact strongly with the lipid bilayers in the stratum corneum to create defects as diffusion paths, their interactions with the delivery system, such as polymers forming a hydrogel, could compromise gelation, formulation stability, and drug diffusion. To overcome that challenge, we explore the differing interactions present with sodium dodecyl sulfate (SDS), an ionic surfactant and a common CPE, and methyl laurate (ML), a non-ionic counterpart with a similar length alkyl chain. Notably, we show that the use of ML effectively decouples permeation enhancement from gelation, enabling sustained delivery across TMs to treat acute otitis media (AOM) that is not possible with the use of SDS. We reveal that ML and ciprofloxacin form a pseudo-surfactant that significantly boosts transtympanic permeation. The middle ear ciprofloxacin concentration is increased by 70-fold in vivo in a chinchilla AOM model, yielding superior efficacy and biocompatibility than the previous highest-performing formulation. Beyond improved efficacy and biocompatibility, this single-CPE formulation significantly accelerates its progression toward clinical deployment. This article is protected by copyright. All rights reserved.

Comparison of three techniques for decellularization of porcine bone-tendon-bone grafts

ABSTRACT Anterior cruciate ligament injuries are frequent afflictions related to sports or physical trauma. Autograft reconstruction strategies cause secondary injury to the patient. One alternative, supported by clinical evidence, is porcine xenografts. For clinical use, xenografts must be conditioned to avoid immune rejection. The most widely accepted procedure is tissue decellularization. We analyzed three decellularization strategies: the application of the anionic detergent sodium dodecyl sulfate (SDS), sonication, and freezing and thawing cycles. The treated tissues were evaluated histologically using H&E, Masson’s trichrome, Verhoeff-van Gieson staining, and DAPI for fluorescent staining of nuclei. Finally, collagen fiber preservation was evaluated by quantifying this protein by colorimetry. The most efficient decellularization techniques were sonication and SDS. Collagen fibers were preserved in all experimental conditions.

Influence of Different Types of Surfactants on the Flotation of Natural Quartz by Dodecylamine

The synergistic effect among flotation agents is why combined flotation agents exhibit superior performance compared to single flotation agents. This research investigates the influence of three surfactants with different charges of polar groups, sodium dodecyl sulfate (SDS), cetyltrimethylammonium bromide (CTAB), and octanol, combined with dodecylamine (DDA), on quartz flotation. Through the implementation of flotation tests, bubble–particle adhesion induction time testing, gas–liquid two-phase foam properties testing, and surface tension testing, it is revealed that substituting part of the DDA with these surfactants can either enhance or at least maintain the quartz recovery, affect the adhesion induction time, reduce the surface tension of the flotation system, and change the foaming performance and foam stability, depending on their mole ratio in the combined collector. Compared to DDA alone, combining CTAB or OCT with DDA can significantly increase quartz recovery, while SDS with DDA only yields an approximate recovery. Combining SDS or OCT with DDA can reduce the foam stability, while CTAB with DDA enhances the foam stability. The effect of the combination of surfactants and DDA on the adhesion induction time of quartz grains of different sizes with bubbles is the same; furthermore, there is a negative correlation between the adhesion induction time and the recovery, while the foaming properties and stability of foam are positively correlated with the recovery.

Sulfonamide Per- and Polyfluoroalkyl Substances Can Impact Microorganisms Used in Aromatic Hydrocarbon and Trichloroethene Bioremediation.

Per- and polyfluoroalkyl substances (PFASs) from aqueous film forming foams (AFFFs) can hinder bioremediation of co-contaminants such as trichloroethene (TCE) and benzene, toluene, ethylbenzene, and xylene (BTEX). Anaerobic dechlorination can require bioaugmentation of Dehalococcoides, and for BTEX, oxygen is often sparged to stimulate in situ aerobic biodegradation. We tested PFAS inhibition to TCE and BTEX bioremediation by exposing an anaerobic TCE-dechlorinating coculture, an aerobic BTEX-degrading enrichment culture, and an anaerobic toluene-degrading enrichment culture to n-dimethyl perfluorohexane sulfonamido amine (AmPr-FHxSA), perfluorohexane sulfonamide (FHxSA), perfluorohexanesulfonic acid (PFHxS), or nonfluorinated surfactant sodium dodecyl sulfate (SDS). The anaerobic TCE-dechlorinating coculture was resistant to individual PFAS exposures but was inhibited by >1000× diluted AFFF. FHxSA and AmPr-FHxSA inhibited the aerobic BTEX-degrading enrichment. The anaerobic toluene-degrading enrichment was not inhibited by AFFF or individual PFASs. Increases in amino acids in the anaerobic TCE-dechlorinating coculture compared to the control indicated stress response, whereas the BTEX culture exhibited lower concentrations of all amino acids upon exposure to most surfactants (both fluorinated and nonfluorinated) compared to the control. These data suggest the main mechanisms of microbial toxicity are related to interactions with cell membrane synthesis as well as protein stress signaling.

Energy storage density enhancement in paraffin phase change material emulsions: A comparative study with two different base fluids

This investigation examined the thermophysical properties of emulsions comprising paraffin 56/58 phase change material (PCM) dispersed in water and ethylene glycol (60 wt%) aqueous solution to optimize energy storage density for low-temperature thermal applications. Dynamic Light Scattering analysis revealed a uniform dispersion of paraffin 56/58 PCM droplets in the basefluids, with an average diameter of approximately 150 nm achieved by incorporating sodium dodecyl sulfate surfactant. The latent heat of fusion for emulsions containing paraffin 56/58 PCM in ethylene glycol (60 wt%) exhibited values of 37.5/41.7, 58.5/63.9, 73.8/75.43, and 93/90.25 J/g for concentrations of 20, 30, 40, and 50 wt%, respectively, during melting/solidification phases. Furthermore, the highest energy storage densities of 306.95 and 361.3 kJ/kg were attained at a PCM concentration of 50 wt% in ethylene glycol (60 wt%) and water-based emulsions, respectively, surpassing those of similar working fluids. It is also indicated that water-based paraffin 56/58 PCMs offer superior energy storage density. However, under severe operating conditions such as extreme temperatures, ethylene glycol (60 wt%) based paraffin 56/58 emulsions demonstrate greater suitability, as the evaporation and freezing points of the basefluid can be adjusted by modulating the ethylene glycol concentration ratio.

Enzymatic and Algebraic Methodology to Determine the Contents of Kunitz and Bowman-Birk Inhibitors and Their Contributions to Total Trypsin or Chymotrypsin Inhibition in Soybeans.

Soybeans are the number one source of plant proteins for food and feed, but the natural presence of protein protease inhibitors (PIs), namely, the Kunitz trypsin inhibitor (KTI) and the Bowman-Birk inhibitor (BBI), exerts antinutritional effects. This communication describes a new methodology for simultaneously quantitating all parameters of PIs in soybeans. It consists of seven steps and featured enzymatically measuring trypsin and chymotrypsin inhibitory activities, respectively, and subsequently determining the contents of reactive KTI and BBI and the contributions of each toward total PI mass and total trypsin or chymotrypsin inhibition by solving a proposed system of linear equations with two variables (C = dB + eK and T = xB + yK). This enzymatic and algebraic (EA) methodology was based on differential inhibitions of KTI and BBI toward trypsin and chymotrypsin and validated by applications to a series of mixtures of purified KTI and BBI, two KTI-null and two conventional soybeans, and by sodium dodecyl sulfate polyacrylamide gel electrophoresis. The EA methodology allowed calculations of PI composition and the contributions of individual inhibitors toward total inhibition with ease. It was first found that although BBI constituted only about 30% of the total PI mass in conventional raw soybeans, it contributed about 80% toward total chymotrypsin inhibitor activity and about 45% toward trypsin inhibitor activity. Therefore, BBI caused more total protease inhibitions than those of KTI. Furthermore, the so-called KTI-null soybean mutants still contained measurable KTI content and thus should be named KTI-low soybeans.

Heavy metal application of response surface optimized-lipopeptide biosurfactant produced by Pseudomonas aeruginosa strain CGA-02 in low-cost substrate

Cost-effective methods of biosurfactant production with minimal environmental impact are needed as global demand continues to increase. This study evaluated lipopeptide biosurfactant production in a Pseudomonas aeruginosa strain CGA-02 using a low-cost carbon substrate. The structural properties of the biosurfactant and applicability of the biosurfactant in heavy metal removal were evaluated. Response surface methodology (RSM) involving central composite design (CCD) was used to optimize process parameters to maximize biosurfactant production. The study identified sugar cane molasses and sodium nitrate as carbon and nitrogen sources of choice for bacterial growth and biosurfactant production, with a relatively 2.64-fold increase in biosurfactant yield under optimized conditions. Analysis of the biosurfactant measured a surface tension reduction of water from 72.2 ± 0.26 to 30.5 ± 0.2 mN/m at 40 mg/L critical micelle concentration. GC–MS and FTIR analysis revealed structural properties of the lipopeptide biosurfactant, with fatty acid components predominantly 9-octadecenoic acid (oleic acid), n-hexadecanoic acid, cyclotetrasiloxane and trimyristin, and infrared peaks belonging to amine, carboxyl, nitrile, alkanol, ether and carbonyl groups. Capture of heavy metals using the biosurfactant was evaluated in soil microcosms. Removal rates of 80.47, 100, 77.57, 100, and 97.57% were recorded for As, Pb, Hg, Cd and Cr respectively after 12 weeks of incubation. There was no significant difference (p < 0.05) in the removal efficiency of the biosurfactant and an analogous chemical surfactant, sodium dodecyl sulphate. First and second-order kinetic models described heavy metal removal rates by the biosurfactant. We demonstrate the production of a useful biosurfactant using low-cost waste carbon.

Synergistic effects of nonionic surfactants ethoxylated alkylamines and sodium dodecyl sulfate in mixed systems

HypothesisIn general, the performance of surfactant hybrid systems is better than that of single surfactants, so surfactant hybrid systems are widely used in various industries. As a very important class of nonionic surfactants, ethoxylated alkylamines have been widely used in industries such as washing, coating, and pesticide, but little research has been conducted on their mixed systems. In order to improve the utilization efficiency of surfactants and reduce wastage, the surface properties and aggregation behavior of ethoxylated alkylamine mixed systems should be further explored. ExperimentIn this study, the nonionic surfactant ethoxylated dodecylamine (AC-1202) and the anionic surfactant sodium dodecyl sulfate (SDS) were used to form a mixed system. The static surface tension and interaction parameters of the mixed system under the influence of inorganic salt ions were investigated using a KRÜSS K12 surface tensiometer. The diffusion process of the mixed system was investigated using a KRÜSS bubble pressure tensiometer. At the same time, the aggregate behavior of the mixed system was studied by particle size analyzer. In addition, the contact angle and rheological properties of the mixed solution were also investigated. FindingsThe SDS/AC-1202 mixture system formed a synergistic effect that could reduce the CMC value to 24.20 mN/m and the CMC value was as low as 22.89 mN/m after the addition of inorganic salts. The mixed system conforms to the kinetic mechanism of mixing and diffusion and the Ostwald de model for non-Newtonian fluids. Finally, there is a good aggregation pattern in the mixed system, and the stronger synergistic effect will lead to the reduction of the average particle size of the mixture to 45.41 nm.

Construction of dental pulp decellularized matrix by cyclic lavation combined with mechanical stirring and its proteomic analysis

The decellularized matrix has a great potential for tissue remodeling and regeneration; however, decellularization could induce host immune rejection due to incomplete cell removal or detergent residues, thereby posing significant challenges for its clinical application. Therefore, the selection of an appropriate detergent concentration, further optimization of tissue decellularization technique, increased of biosafety in decellularized tissues, and reduction of tissue damage during the decellularization procedures are pivotal issues that need to be investigated. In this study, we tested several conditions and determined that 0.1% Sodium dodecyl sulfate and three decellularization cycles were the optimal conditions for decellularization of pulp tissue. Decellularization efficiency was calculated and the preparation protocol for dental pulp decellularization matrix (DPDM) was further optimized. To characterize the optimized DPDM, the microstructure, odontogenesis-related protein and fiber content were evaluated. Our results showed that the properties of optimized DPDM were superior to those of the non-optimized matrix. We also performed the 4D-Label-free quantitative proteomic analysis of DPDM and demonstrated the preservation of proteins from the natural pulp. This study provides a optimized protocol for the potential application of DPDM in pulp regeneration.

Preparation and characterization of phase change material emulsions and their applications in liquid cooling systems for wind turbines

In order to improve the effect of liquid cooling system for wind turbine, this study used ultrasonic preparation method, stearic acid as phase change material, sorbitan trioleate and sodium lauryl sulfate as compound surfactants successfully prepared stearic acid phase change material emulsion as a cooling medium for investigation. The characterization, thermophysical properties, and fluidity of stearic acid phase change material emulsions at varying concentrations were examined through differential scanning calorimetry, thermal constant analysis, and viscometry. To investigate the cooling effects, a stator axial liquid cooling model was developed for both water and a 14 % stearic acid phase change material emulsion. Findings revealed that the 14 % stearic acid phase change material emulsion exhibited a latent heat of phase change of 22.5 J/g, reaching a peak melting temperature of 68.7 °C. Additionally, the latent heat of solidification was measured at 21.08 J/g, accompanied by a peak solidification temperature of 60.3 °C. The maximum thermal conductivity reached 0.5801 W/(m·K), and the specific heat capacity peaked at 5219.8 J/(K·mol), marking a notable improvement of 1.26 times. Under an inlet temperature of 30 °C and a flow rate of 1 L/min, stearic acid phase change material emulsion effectively lowered the temperatures of the windings, stator, rotor, and casing by 19.2 °C, 23.6 °C, 19.2 °C, and 9.6 °C, respectively. stearic acid phase change material emulsion demonstrates excellent temperature control effectiveness at 3600 r/min and a low flow rate of 1 L/min, showcasing efficient energy utilization efficiency.

Hydrophobins: multitask proteins

Hydrophobins are small amphiphilic extracellular proteins produced by filamentous fungi; they are surface-active proteins, and their functions are mainly related to their ability to self-assemble into amphipathic monolayers at hydrophobic–hydrophilic interfaces. Depending on their hydropathy patterns and purification requirements, they are classified into class I and class II; both present eight conserved cysteines throughout their sequence, forming four disulfide bridges, which generate four loops that give stability to the protein in its monomeric and folded forms. Class I hydrophobin loops are more extended than class II hydrophobin loops, resulting in differences in assembly on divergent surfaces, additionally accompanied by conformational changes in the protein structure. In the monomer hydrophobin glycosylated form, hydrophobins are rich in β-sheet structure, while being assembled at the water–air interface increases the content of the β-sheet in their structure and is at the interface with water, and a hydrophobic solid such as Teflon also induces the formation of an α-helix structure. The monolayers generated by class I are stable structures called fibrils or rodlets, and class II only produces aggregates. Class I presents a glycosylated chain in its sequence; this causes the formation of the α-helix structure, promoting ordered assemblies, which entails their stability and high insolubility. Fibrils could be dissociated with trifluoroacetic acid and formic acid, which unfolds the protein, while 60% ethanol and 2% sodium dodecyl sulfate solutions dissociate class II aggregates.

Ultra-stable foam enabled by nano silica engineering for foam concrete improvement

Foam concrete is increasingly applied in construction due to its lightweight, good thermal insulation and fire resistance, and environmental sustainability, while its low strength limits its further popularization and applications. To enhance the stability and performance of foam concrete, amphiphilic nano silica (ANS) was employed in this study to modify the sodium dodecyl sulphate (SDS) based foaming agent. Then, the designed foam was utilized to fabricate foam concrete, of which the micro/macro performance was analysed in detail. The results showed that ANS-modified foam exhibited superior stability with a thicker foam wall thickness, contributing to the enhancement of foam stability within the cement matrix. The foam concrete with ANS exhibited higher strength compared to the control groups. The analysis of pore structures revealed that the ANS modification led to a more rounded and homogeneous pore configuration, characterized by an increased proportion of small and medium-sized pores and a decreased average pore size. The increase in pore roundness was accompanied by a reduction in the number of sharp edges of the pores and therefore a reduction in the stress concentration factor, while the moderately sized pore also was more conducive to increasing strength due to its lower stress concentration. As a result, the strength of the concrete is significantly increased. These findings demonstrate the potential of ANS as an effective foam stabilizer for foam concrete production, leading to enhanced foam stability and improved mechanical properties of concrete.

Production, characterization, and application of Pseudoxanthomonas taiwanensis biosurfactant: a green chemical for microbial enhanced oil recovery (MEOR)

Biosurfactants, as microbial bioproducts, have significant potential in the field of microbial enhanced oil recovery (MEOR). Biosurfactants are microbial bioproducts with the potential to reduce the interfacial tension (IFT) between crude oil and water, thus enhancing oil recovery. This study aims to investigate the production and characterization of biosurfactants and evaluate their effectiveness in increasing oil recovery. Pseudoxanthomonas taiwanensis was cultured on SMSS medium to produce biosurfactants. Crude oil was found to be the most effective carbon source for biosurfactant production. The biosurfactants exhibited comparable activity to sodium dodecyl sulfate (SDS) at a concentration of 400 ppm in reducing IFT. It was characterized as glycolipids, showing stability in emulsions at high temperatures (up to 120 °C), pH levels ranging from 3 to 9, and NaCl concentrations up to 10% (w/v). Response surface methodology revealed the optimized conditions for the most stable biosurfactants (pH 7, temperature of 40 °C, and salinity of 2%), resulting in an EI24 value of 64.45%. Experimental evaluations included sand pack column and core flooding studies, which demonstrated additional oil recovery of 36.04% and 12.92%, respectively. These results indicate the potential application of P. taiwanensis biosurfactants as sustainable and environmentally friendly approaches to enhance oil recovery in MEOR processes.

Integrated Janus nanofibers enabled by a co-shell solvent for enhancing icariin delivery efficiency

During the past several decades, nanostructures have played their increasing influences on the developments of novel nano drug delivery systems, among which, double-chamber Janus nanostructure is a popular one. In this study, a new tri-channel spinneret was developed, in which two parallel metal capillaries were nested into another metal capillary in a core–shell manner. A tri-fluid electrospinning was conducted with a solvent mixture as the shell working fluid for ensuring the formation of an integrated Janus nanostructure. The scanning electronic microscopic results demonstrated that the resultant nanofibers had a linear morphology and two distinct compartments within them, as indicated by the image of a cross-section. Fourier Transformation Infra-Red spectra and X-Ray Diffraction patterns verified that the loaded poorly water-soluble drug, i.e. icariin, presented in the Janus medicated nanofibers in an amorphous state, which should be attributed to the favorable secondary interactions between icariin and the two soluble polymeric matrices, i.e. hydroxypropyl methyl cellulose (HPMC) and polyvinylpyrrolidone (PVP). The in vitro dissolution tests revealed that icariin, when encapsulated within the Janus nanofibers, exhibited complete release within a duration of 5 min, which was over 11 times faster compared to the raw drug particles. Furthermore, the ex vivo permeation tests demonstrated that the permeation rate of icariin was 16.2 times higher than that of the drug powders. This improvement was attributed to both the rapid dissolution of the drug and the pre-release of the trans-membrane enhancer sodium lauryl sulfate from the PVP side of the nanofibers. Mechanisms for microformation, drug release, and permeation were proposed. Based on the methodologies outlined in this study, numerous novel Janus nanostructure-based nano drug delivery systems can be developed for poorly water-soluble drugs in the future.

Conductive Polypyrrole: Synthesis, Characterization, Thermal, and Electrical Properties for different applications

Abstract Pyrrole monomer (mPPy) in an aqueous solution was used to create the conductive polymer polypyrrole (a homo-PPy) using a chemical oxidative polymerization process over a period of several hours at room temperature. Ferric chloride (FeCl3) oxidant was used, and sodium dodecyl sulphate (C12H25NaO4S), a surfactant. The produced PPy samples were characterized using a variety of methods, including X-ray diffraction (XRD), the Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), Differential Thermal analysis (DTA), Thermogravimetric analysis (TGA), and scanning electron microscopy (SEM). SEM images revealed that nanoparticles of a homo-PPy with radii of 60-90 nm were well evenly distributed in the structure. The thermal stability and electrical conductivity of homo-PPy nanoparticles were observed to rise with a different solvent content of homo-PPy nanoparticles. As temperature rises, the electrical resistivity of the FeCl3 oxidation decreases, resulting in enhanced conductivity. It has been noted that the conductivity of homo-PPy samples is &amp;#xD; significantly influenced by their shape, and electrical conductivities ranging from.0.44 to 2.2 (Ω.m)-1. It was revealed that the solvent (ethylene glycol) and monomer had more successful heat stability. Results from FTIR and XRD analysis confirmed the structural formation of a homo-polypyrrole during synthesis from pyrrole monomer. Because of their improved electrical conductivity and thermal stability, homo-PPy nanoparticles have potential applications in energy storage, adsorption and contamination elimination, electromagnetic protection, and resistance to corrosion.&amp;#xD;

Isolation and characterization of rabies monoclonal antibody charge variants.

Current postexposure prophylaxis of rabies includes vaccines, human rabies immunoglobulin (RIG), equine RIG, and recombinant monoclonal antibodies (mAb). In the manufacturing of rabies recombinant mAb, charge variants are the most common source of heterogeneity. Charge variants of rabies mAb were isolated by salt gradient cation exchange chromatography (CEX) to separate acidic and basic and main charge variants. Separated variants were further extensively characterized using orthogonal analytical techniques, which include secondary and tertiary structure determination by far and near ultraviolet circular dichroism spectroscopy. Charge and size heterogeneity were evaluated using CEX, isoelectric focusing (IEF), capillary-IEF, size exclusion chromatography, sodium dodecyl sulfate polyacrylamide gel electrophoresis, and western blotting. Antigen binding affinity was assessed by enzyme linked immuno-sorbent assay and rapid florescence foci inhibition test. Results from structural and physicochemical characterizations concluded that charge variants are formed due to posttranslational modification demonstrating that the charge heterogeneity, these charge variants did neither show any considerable physicochemical change nor affect its biological function. This study shows that charge variants are effective components of mAb and there is no need of deliberate removal, until biological functions of rabies mAb will get affected.