Small Spot Research Articles

First Report of the Rust Fungus Melampsora ferrinii on Salix babylonica in China and a New Spermogonial and Aecial Host, Corydalis bungeana.

The occurrence of rust fungi on Corydalis bungeana Turcz. and Salix babylonica L. were found in same area of Hebei Province, China from 2022 to 2023. The life cycle connection of these rust fungi was suspected because Peng et al. (2022) reported the life cycle of Melampsora ferrinii Toome & Aime by inoculations, producing spermogonia and aecia on Corydalis species, and uredinia on S. babylonica. The morphology of the uredinial and telial stages on S. babylonica collected in the field was identical with the description of M. ferrinii by Toome and Aime (2015), and its identity was confirmed by phylogenetic analyses using the method of Ji et al. (2020) (LSU-PP087777, ITS-PP091274; Similarity with M. ferrinii: LSU-100%, ITS-99.85%). To confirm the life cycle of this rust fungus, inoculations were conducted on C. bungeana with basidiospores obtained from the teliospores on fallen leaves of Salix babylonica. The fallen leaves producing basidiospores were cut into small pieces (ca. 5 mm2) and placed on healthy leaves of C. bungeana. The inoculated plants were kept in a moist plastic box in darkness at 15-20℃ for 2 days and then transferred to the floor near windows at about 15-20℃ for observations. Ten days after inoculations small yellow spots of spermogonia appeared on the upper surface of the leaves of C. bungeana. About 7 days later, pale yellow aecia with aeciospores were produced mainly on the under surface of the leaves and petioles. The morphology of rust fungus on C. bungeana collected from the fields and obtained by inoculations was identical with the description by Peng et al. (2022). Phylogenetic analyses also showed that a specimen on C. bungeana collected from the field (LSU-OR607838, ITS-OR612063) were included into the same clade of M. ferrinii (Similarity: LSU-100 %, ITS-99.85). Based on morphology, inoculations and DNA sequence analyses, the rust fungi on C. bungeana and S. babylonica are identified as different stages of life cycle of M. ferrinii. This rust fungus has been reported to produce spermogonia and aecia on C. acuminata Franch., C. edulis Maxim. and C. racemosa (Thunb.) Pers. in China (Peng et al. 2022), and uredinia and telia on S. babylonica in USA, Argentina and Iran (Toome and Aime 2015, Abbasi et al. 2024), and on Salix sp. in Chile (Zapata 2016). Therefore, C. bungeana is a new host for M. ferrinii, and its field occurrence on S. babylonica is reported for the first time in China although Peng et al. (2022) reported successful results in its inoculations to S. babylonica in China. This report contributes to the control of rust diseases caused by this species. Specimens used in this experiment were deposited in the Fungal Herbarium of the Jilin Agricultural University, Changchun, China (HMJAU) and sequences newly analyzed were deposited in GenBank.

First Report of Alternaria linariae Causing Postharvest Fruit Rot of Pepino (Solanum muricatum) in China.

Pepino (Solanum muricatum L.) is a popular solanaceous crop that is native to South America and is commercially grown in many countries including China for its attractive, sweet and flavorful fruits. In September 2023, a postharvest fruit rot was observed at an incidence of 7% to 10% on pepino at supermarket in Nanchang, Jiangxi, China (28.69°N, 115.81°E). Symptoms on fruits initially appeared as small black spots that later enlarged and became necrotic. To isolate the pathogen, symptomatic tissues were surface-sterilized using 75% ethanol for 15 s, then 1% sodium hypochlorite for 30 s, rinsed three times in sterile water, air dried, finally placed on potato dextrose agar (PDA) plates and incubated at 25℃ for 4 days. Ten strains (about 83% isolationfrequencyfromsymptomaticpepinofruits) with similar morphological characteristics were isolated. The colonies on PDA were initially white, gradually turning gray and eventually becoming black, and had abundant aerial mycelia. Conidia were fusiform to linetype, dark brown, measuring 50 to 100 × 10 to 28 μm (n = 30) with 5 to 10 transverse septa and 0 to 3 longitudinal septa. Based on the morphological characteristics, the pathogen was identified as Alternaria sp. (Ma et al. 2021). To further confirm species, two representative isolates (JXAL-1 and JXAL-2) were selected for molecular identification. The internal transcribed spacer (ITS) region, glyceraldehyde-3-phosphate dehydrogenase (GAPDH), elongation factor 1-alpha (TEF1), Alternaria major allergen gene (Alt a 1) and DNA-directed RNA polymerase II core subunit (RPB2) were amplified and sequenced by using primers ITS5/ITS4, gpd1/gpd2, Alt-for/Alt-rev, EF1-728F/EF1-986R and fRPB2-5F2/fRPB2-7cR (Woudenberg et al. 2013; Woudenberg et al. 2014), respectively. These sequences were deposited into GenBank with accession number PP231808-PP231809 (ITS), PP238480-PP238481 (GAPDH), PP238482-PP238483 (Alt a 1), PP238484-PP238485 (TEF1) and PP238486-PP238487 (RPB2). A BLASTn homology search for these nucleotides showed 100% identity to ITS (KJ718182, 525 nt/525 nt), GAPDH (KJ718026, 579 nt/579 nt), Alt a 1 (KJ718694, 472 nt/472 nt), TEF1 (KJ718530, 334 nt/334 nt) and RPB2 (KJ718355, 772 nt/772 nt) sequences of Alternaria linariae CBS 107.61. The maximum likelihood analyses were performed for the combined ITS, GAPDH, Alt a 1, TEF1 and RPB2 using the IQtree web server (Trifinopoulos et al. 2016). In the phylogenetic tree, the isolates and isolates of A. linariae clustered together with 100% bootstrap support. Therefore, the fungus was identified as A. linariae. To evaluate pathogenicity, five healthy fruits of pepino were surface-sterilized with 75% ethanol, then wounded and a 5 mm diameter agar with isolate JXAL-1 was put on the wound. Another five fruits was inoculated with sterile agar plugs as control. All treated fruits were incubated at 25 ℃ with 80% humidity , and repeated twice. Five days later, all the wounded fruits inoculated with A. linariae showed similar symptoms and A. linariae was reisolated, while the control fruits remained healthy and no pathogen was isolated, fulfilling Koch's postulates. A. linariae is known as an important pathogen causing early blight of tomato and potato(Adhikari et al. 2020). To our knowledge, this is the first report of A. linariae causing postharvest fruit rot on S. muricatum in China, which expands the natural host range of A. linariae and will be helpful to develop efficient management strategies on pepino.

Influence of Grid Aperture Ratio on Electron Transmittance and Electron Beam Spot Size in Field Emission Processes of Carbon Nanotubes

Field emission is an important work mode for electron sources, and carbon nanotubes (CNTs) have been extensively studied for their good emission properties. It is well known that the parameters of the grid deeply influence the field emission performance of CNTs, a relationship that requires further elucidation. Therefore, in this study, the relationship between the grid aperture ratio and electron transmittance was studied through simulations and experiments. This study’s results indicate that the electron transmittance improved as the grid aperture ratio increased. Meanwhile, electron beam spot simulations and imaging experiments indicate that an increased grid aperture ratio will expand the cathode electron divergence, leading to a larger electron beam spot size. These results demonstrate that there is a trade-off in maintaining the grid aperture ratio between high electron transmittance and relatively small electron beam spot size, and the optimum grid aperture ratio is between 75% and 85%. These results will provide a reference for the design and optimization of X-ray tubes and other electron sources.

First repot of Chaetomium globosum causing leaf spot on Averrhoa carambola in India.

The Star fruit (Averrhoa carambola L.) was globally distributed, particularly in countries like China, India, Indonesia and was renowned for its abundant vitamin, mineral and antioxidant content (Reddy et al., 2023). In early February 2023, leaf spot symptoms were observed on A. carambola at 2 hectare model orchard, College farm, Agricultural College, Aswaraopet (17.252038 latitude, 81.109574 longitude) and Horticulture nurseries of Aswaraopet, Bhadradri Kothagudem (Dist), Telangana, India. In the surveyed fields (February-2023 to February 2024), the disease was prevalent year round, with varying incidence i.e., July to February (35% to 40% with a yield loss of 35%) and from March to June (20% to 30% with a yield loss of 20%). The disease was initiated as small reddish spots, which grew over 8-10 days to 1-5 mm spots with a necrotic center, dark reddish brown margin and a prominent yellow halo around them, within 17 to 20 days, all spots coalesced, resulting in leaf yellowing and defoliation (SF 1). To isolate pathogen, diseased leaf tissues (n=20) (5 × 5 mm) were surface sterilized (70% alcohol (30 s), 1% sodium hypochlorite (30 s) and sterile distilled water (3 × 60 s), inoculated to PDA media and incubated at 26 ± 2°C with 12 hours photoperiod for 72 hours (Chi et al. 2022). The emerging hyphae from the diseased tissues were sub cultured and incubated on PDA at 26 ± 2 °C. Initially, the fungal colonies appeared white, later transitioning to light brown and finally developed into olivaceous grey colour (SF 2A). The ascospores (n=20) were lemon shaped, pointed at both ends, with a length of 10.3 μm (9.1 to 12.1 μm) and width of 8.6 μm (7.2 to 10.2 μm) (SF 2B and 2C). For further identification of the pathogen, four fungal isolates were cultured in potato dextrose broth and genomic DNA was extracted using the CTAB method. Identification of the pathogen was confirmed through amplification and sequencing the Internal Transcribed Spacer region (ITS), Translation Elongation Factor 1-α (TEF1) and RNA polymerase subunit (RPB1) genes. The resulting sequences were deposited in Gen Bank with accession numbers (OR337915, OR337916, OR337893 and OR337892 for ITS, OR669280, OR669281, OR669282, and OR669283 for TEF, and PP092153, PP092154, PP092155 and PP092156 for RPB1). To study pathogenicity of fungus, five isolates of C. globosum were isolated from five A. carambola plants, grown in potato dextrose broth. Spore suspension of 1x106 spores/mL were prepared by adjusting with hemacytometer and were sprayed onto the leaves of healthy, surface sterilized (50% ethanol), 3 months old A. carambola plants and incubated in greenhouse (T: 26°C; RH: 80%). For each of the five isolates, the spore suspension from each individual isolate was inoculated into three plants and three control plants were maintained for each isolate. The experiment was replicated thrice. After a period of 10 to 12 days, symptoms appeared on the inoculated leaves in the form of reddish spots, similar to original symptoms (Alam et al. 2021) (SF 1H). The fungus isolated from the inoculated leaves was morphologically similarities to C. globosum. Notably, C. globosum, a widespread leaf spot pathogen in crops like A. hypogaea, C. sativa and Pomegranate (Chaffin et al. 2020). To our knowledge, this is the first report of A. carambola leaf spot caused by C. globosum in India and worldwide. The result will be helpful for providing a basis for further research on the control of the disease.

Outbreak of Septoria leaf spot caused by Sphaerulina musiva on Populus × euramericana in China.

In June 2023, severe leaf spots were noted in Populus × euramericana cv 'Nanlin95' plantations located in the Nanjing Baguazhou Wetland Park (32°09'16.97″N, 118°48'16.74″E) of Jiangsu Province and Populus × canadensis cv 'Sacrau 79' and Populus × canadensis cv 'Guariento' in the Liyuan Village in Nanyang City (32°53'43.70″N, 112°17'29.12″E) of Henan Province, respectively. The disease incidence in both locations could reach 97.9% (556 out of 568 trees) and 98.9% (2409 out of 2436 trees), respectively. The initial symptoms appear as numerous small and circular spots (1.59 to 3.18 mm in diameter) with gray or tan centers and dark-brown margins on the leaves. As the spots age, they sometimes enlarge, often coalesce, and may extend down the petioles. Diseased leaves and petioles were both surface sterilized with 75% ethanol for 30 seconds. With the aid of a hand lens, pycnidia (brown to black, spherical in profile, 90 to 250 µm diam) were easily picked out in the center of the spots and subsequently transferred into 1 mL sterilized water for preparing the spore suspension plated on KV8 medium amended with 100 mg/liter streptomycin sulfate and 50 mg/liter chloramphenicol. After 12 days of incubation, 86 single-spore isolates were obtained and identified as typical Septoria-like fungi according to morphological features, including slow-growing, gray or black colonies with pink mucilaginous matrix and hyaline, straight or curved conidia (size = 25 to 59 × 3.5 to 4 μm; septa = 1 to 6). Species identification was further validated by PCR amplification and sequencing of the internal transcribed spacer (ITS) region with ITS1/ITS4 primer pairs. Multiple sequence alignments with ClustalW revealed that the obtained ITS sequences of 86 isolates were 100% identical to each other. A BLAST search in GenBank indicated that the selfsame sequences of two representative isolates (isolate BGZ11 of Jiangsu Province, accession no. OR660379; isolate KZB22 of Henan Province, accession no. OR711499) shared 99.8% identity (494 of 495 bp) and 100% identity (504 of 504 bp) with related sequences of Sphaerulina musiva (Peck) Quaedvlieg, Verkley, and Crous (syn. = Septoria musiva Peck) in GenBank (MN275187; KF251619), respectively. Furthermore, we used a S. musiva-specific PCR assay (Abraham et al. 2018) on symptomatic leaf samples collected from the plantation. Each sample consisted of 20 cut-out leaf spots per leaf. Eight of the 10 samples were positive for S. musiva DNA. To confirm pathogenicity, six sterile tissue culture of poplar plants (Populus trichocarpa and Populus × euramericana cv 'Nanlin895') were respectively transplanted into pots and grown in a greenhouse for a week and for a month with an 18-h photoperiod augmented with sodium lamps and a 20°C (day)/16°C (night) temperature regime. Inoculations were conducted by spraying the plants with conidia suspension (106 conidia/mL) (LeBoldus et al. 2010). Control plants were sprayed with distilled water. Leaf spots were developed on the inoculated P. trichocarpa leaves at one week and P. × euramericana cv 'Nanlin895' leaves at 10 days after inoculation while no symptoms were observed on the control plants. The fungus S. musiva was successfully reisolated from all symptomatic leaves fulfilling Koch's postulates. Sphaerulina musiva only causes an endemic leaf spot disease on its natural North American host Populus. deltoides (Feau et al. 2010; Ostry 1987). However, on susceptible Populus species (e.g., P. balsamifera, P. trichocarpa, P. maximowiczii) and hybrids, S. musiva causes not only leaf spots but also severely damaging stem and branch cankers (Jeger et al. 2018; LeBoldus et al. 2009; Sondreli et al. 2020). To our knowledge, this is the first report of S. musiva causing leaf spots on poplar in China. Large-scale timber imports (e.g., cut branches, isolated bark, wood with and without bark) potentially lead to anthropogenic-facilitated transport of this pathogen. This outbreak of Septoria leaf spot underscores the potential threat of this pathogen to P. × euramericana in China, where it is widely planted as a keystone forestry species.

Simultaneous measurement of corrosion potential and hydrogen penetration using double-head scanning Kelvin probe

High-strength steels, such as high-strength bolts or steel plates are considerably sensitive to hydrogen embrittlement. Serious safety problems in steel structures are possible, because they are exposed to atmospheric condition containing chloride ions. Embrittlement is induced by hydrogen penetration during atmospheric corrosion. We developed Double-Head Scanning Kelvin Probe (DHSKP) equipment to clarify the relationship between the corrosion process and hydrogen permeation. Each probe can simultaneously measure the corrosion potential on the corroded side and surface potential on the hydrogen-detecting side at the same time. In this study, we investigated the correlation between the corrosion potential and hydrogen permeation under changing conditions from wet to dry processes on the surface of a steel sample. During the drying process, the corrosion potential at the rust layer that precipitated in the early wetting condition showed a less noble potential locally, whereas the surface potential of the Pd film on the hydrogen detection side showed a less noble potential locally. The hydrogen permeation sites were limited to small spots in the opposite area, where the corrosion potential showed a less noble local-potential during the drying process. Hydrogen penetration by corrosion likely occurs in acidic liquids under the rust layer during the drying process.

First Report of Chocolate Spot Caused by Botrytis eucalypti on Faba bean in China.

Faba bean (Vicia faba) is one of the characteristic economic crops in Qinghai Province of China, which has multiple uses as grain, vegetable, fodder, fertilizer and medicine. Chocolate spot is a critical disease of faba bean in the world, and it is widely spread in all production areas of Qinghai. In August 2021, a severe occurrence of chocolate spot was found in a faba bean field in Xunhua County, Qinghai Province (35°52'N, 102°22'E, alt. 1890m). All plants in the field were affected by this disease. A voucher specimen was deposited in the Herbarium of Plant Pathology, College of Agricultural and Forestry Sciences at Qinghai University under accession No. PY015. The pathogen infected the leaves and stems, causing small irregular red spots to appear, which later coalesce into larger spots and faded green lesions appear around the spots. Diseased leaf pieces 5 mm2 were surface sterilized with 75% ethyl alcohol for 30s, 1.2% NaOCl for 30s, and rinsed three times with sterile water. They were then plated on potato dextrose agar (PDA) at 22℃ for 10 days in the dark. Fungal colonies are initially white, then gray, and have produced spores by 5 days. Conidia are clusters, ellipsoidal or ovoid, 9-14 × 6-9 μm. The conidiophore is straight, terminally enlarged, septate, 300-1500 μm long, 8-13 μm wide. No sclerotia were observed during culture. DNA of the strain PY015 was extracted by CTAB method. Molecular identification was first performed using the universal region of ITS (ITS1/ITS4). The PCR product was sequenced, the sequence was deposited in GenBank under the accession number OR739575. The results showed 100% similarity to Botrytis spp. (KX301016, MT250940, LC519322) in BLAST search. Molecular characterization was continued using five specific primer pairs: RPB2 (DNA-dependent RNA polymerase subunit II, RPB2-5F/RPB2-7cR), NEP1 and NEP2 (necrosis and ethylene-inducing proteins, NEP1for/ NEP1revB and NEP2forD/NEP2revD), HSP60 (heat-shock protein 60, HSP60for/HSP60rev), G3PDH (glyceraldehyde-3-phosphate dehydrogenase, G3PDHfor/G3PDHrev). The sequences of PY015 were deposited in GenBank (accession numbers: OR731179, OR731180, OR731181, OR731182, OR731183), and all five sequences showed 100% similarity to Botrytis eucalypti YZU171088 (accession numbers: MH614610 MH614611, MH614612, MH614613 MH614614). A phylogenetic tree based on these five genes was constructed using Mega7.0 (1000 bootstrap replicates, neighbor-joining method), and PY015 was placed in the same clade as YZU171088 with 100% bootstrap values. Morphological and molecular biological results confirmed that isolate PY015 was B. eucalypti. To fulfill Koch's postulates, the spore suspension (2 × 105 conidia/ml) was sprayed on healthy faba bean (Yun-122) plants at the 10-leaf stage, while an equal amount of sterile distilled water was applied to controls. After 7 days, the inoculated plants showed symptoms consistent with field infection and B. eucalypti was re-isolated using the same protocol, while the control remained asymptomatic. The pathogenicity test was repeated twice. The same isolates were recovered from symptomatic leaves and identified by NEP1 sequence. B. eucalypti was morphologically and molecularly identical to the original isolates, completing Koch's postulates. Currently, Botrytis fabae, Botrytis fabiopsis, and Botrytis cinerea are the main pathogens of chocolate spot on faba bean that have been identified and reported nationally and internationally. B. eucalypti is a new species discovered from eucalyptus in southern China in 2016, and its current hosts are only eucalyptus and citrus. To our knowledge, the present study is the first report of chocolate spot caused by B. eucalypti on faba bean in China.

GLUT4 localisation with the plasma membrane is unaffected by an increase in plasma free fatty acid availability

BackgroundInsulin-stimulated glucose uptake into skeletal muscle occurs via translocation of GLUT4 from intracellular storage vesicles to the plasma membrane. Elevated free fatty acid (FFA) availability via a lipid infusion reduces glucose disposal, but this occurs in the absence of impaired proximal insulin signalling. Whether GLUT4 localisation to the plasma membrane is subsequently affected by elevated FFA availability is not known.MethodsTrained (n = 11) and sedentary (n = 10) individuals, matched for age, sex and body mass index, received either a 6 h lipid or glycerol infusion in the setting of a concurrent hyperinsulinaemic-euglycaemic clamp. Sequential muscle biopsies (0, 2 and 6 h) were analysed for GLUT4 membrane localisation and microvesicle size and distribution using immunofluorescence microscopy.ResultsAt baseline, trained individuals had more small GLUT4 spots at the plasma membrane, whereas sedentary individuals had larger GLUT4 spots. GLUT4 localisation with the plasma membrane increased at 2 h (P = 0.04) of the hyperinsulinemic-euglycemic clamp, and remained elevated until 6 h, with no differences between groups or infusion type. The number of GLUT4 spots was unchanged at 2 h of infusion. However, from 2 to 6 h there was a decrease in the number of small GLUT4 spots at the plasma membrane (P = 0.047), with no differences between groups or infusion type.ConclusionGLUT4 localisation with the plasma membrane increases during a hyperinsulinemic-euglycemic clamp, but this is not altered by elevated FFA availability. GLUT4 appears to disperse from small GLUT4 clusters located at the plasma membrane to support glucose uptake during a hyperinsulinaemic-euglycaemic clamp.

Infrared Maritime Small-Target Detection Based on Fusion Gray Gradient Clutter Suppression

The long-distance ship target turns into a small spot in an infrared image, which has the characteristics of small size, weak intensity, limited texture information, and is easily affected by noise. Moreover, the presence of heavy sea clutter, including sun glints that exhibit local contrast similar to small targets, negatively impacts the performance of small-target detection methods. To address these challenges, we propose an effective detection scheme called fusion gray gradient clutter suppression (FGGCS), which leverages the disparities in grayscale and gradient between the target and its surrounding background. Firstly, we designed a harmonic contrast map (HCM) by using the two-dimensional difference of Gaussian (2D-DoG) filter and eigenvalue harmonic mean of the structure tensor to highlight high-contrast regions of interest. Secondly, a local gradient difference measure (LGDM) is designed to distinguish isotropic small targets from background edges with local gradients in a specific direction. Subsequently, by integrating the HCM and LGDM, we designed a fusion gray gradient clutter suppression map (FGGCSM) to effectively enhance the target and suppress clutter from the sea background. Finally, an adaptive constant false alarm threshold is adopted to extract the targets. Extensive experiments on five real infrared maritime image sequences full of sea glints, including a small target and sea–sky background, show that FGGCS effectively increases the signal-to-clutter ratio gain (SCRG) and the background suppression factor (BSF) by more than 22% and 82%, respectively. Furthermore, its receiver operating characteristic (ROC) curve has an obviously more rapid convergence rate than those of other typical detection algorithms and improves the accuracy of small-target detection in complex maritime backgrounds.

Leaf Spot caused by Alternaria tenuissima on Rhamnella franguloides in China.

The small tree species Rhamnella franguloides, belonging to the genus Rhamnella in the tribe Rhamneae Hook. f. of Rhamnaceae (Hauenschild et al. 2016), is an important medicinal plant commonly used for making tea in China. In August 2023, leaf spot symptoms were observed on R. franguloides in Shangyao county, Yantai, Shandong, China, with a disease incidence of 45-65%. Initially appearing as small dark brown spots on the tip lesions, they later expanded and merged into irregular-shaped brown necrotic lesions with yellowish halos. To isolate pathogen, 20 symptomatic tissue fragments (5 × 5 mm) from ten sampling randomly plants were surface sterilized, placed on potato dextrose agar (PDA) plates, and incubated at 25°C in darkness for 3 days to obtain colonies.10 purified isolates with similar morphological characteristics were obtained by single-spore isolation from the colonies. The representative isolate MR13 was chosen for morphological and molecular analysis. The colonies On PDA medium initially appear as a circular yellow-brown ring with white round margins, ultimately turning into olive green with fluffy aerial hyphae. The conidiophores displayed brown pigmentation, solitary or branched, producing abundant short chains of conidia. The conidia were typically obclavate to obpyriform or ellipsoid in shape, 22.5-64.5 × 12.5-23.6μm in size, with a short conical beak at the apex, zero to three longitudinal septa and one to five transverse septa. Based on cultural and morphological characteristics, the fungus was identified as Alternaria spp (Simmons 2007). Due to morphological traits, five genes (the internal transcribed spacer [ITS], actin [ACT], plasma membrane ATPase [ATP], Alternaria major allergen [Alt a1] and histone 3 [H3]) form MR13 were amplified using primer pairs ITSI / ITS4, ACTDF1/R1, ATPDF1 / ATPDRI, Alt-for / Alt-rev, and H3-1a/1b, respectively (Hong et al. 2005; Lawrence et al. 2013; Lousie and Donaldson 1995). BLASTn analysis failed to confirm the identification of MR13 species based on ITS, ACT, ATP and Alt a1(ITS, OR668512; ACT, OR676918; ATP, OR676917; Alt a1, OR676919). The phylogenetic tree showed that it was closely related to Alternaria alternate, A. tenuissima, and A. destruens. The H3 sequence (OR676920) exhibited 100% similarity to A. tenuissima (OR485421). The phylogenetic tree constructed solely with H3 further confirmed MR13 as A. tenuissima. Pathogenicity tests were conducted by introducing the fungus onto healthy R. franguloides leaves in the field. Fifty leaves (five per plant) were treated with a 20ml suspension containing around 1x10^4 spores/ml, while an equal number of control samples were sprayed with distilled water. Transparent plastic bags were used to cover the treated leaves for 48 hours and maintain humidity. After fourteen days of inoculation, consistent leaf spotting symptoms were observed. In contrast, the control leaves showed no sign of infection. The fungal pathogen was successfully reisolated and identified as A. tenuissima through morphological and sequence analysis, fulfilling Koch's postulates. To our knowledge, this is the first report of A. tenuissima causing leaf spot disease on R. franguloides in China. Identifying the disease's causal agent is crucial for developing effective management strategies.

Potential Carbon Stock of Seagrass Biomass in Malang Regency

Research on blue carbon content in seagrass beds also has important implications for coastal ecosystem management. The goals of this research are: (1) To determine the composition of seagrass species; (2) to analyze the health of the seagrass ecosystem; and (3) and to analyze the carbon content stored in seagrass biomass on the coast of Malang Regency. This research was conducted in 2018 at five stations, namely: Kondang Merak Beach (St 1), Balekambang Beach (St 2), Gatra Beach (St 3), Sendangbiru Beach (St 4), and Waru-Waru Beach (St 5) of Malang Regency. The method used to collect data refers to Seagrass Watch. The biomass value of seagrass species can be estimated by measuring the wet weight and dry weight of seagrass. Analysis of carbon content in seagrass biomass can be calculated using a method that refers to The First Nation-Wide Assessment Identifies Valuable Blue-carbon. There are five types of seagrasses found on five beaches in Malang Regency, namely: Halodule pinifolia, Halodule uninervis, Halophila ovalis, Syringodium isotifolium, and Thalassia hemprichii. This seagrass meadow ecosystem is in an unhealthy condition, with a small biomass value. Seagrass beds that are formed only in the form of small spots (1.19 Ha) are known to be able to store carbon of 0.0544 Mg C.

Geant4 Simulation of Scatter Radiation Removal: Comparison and Validation of Anti-scatter Grid and Air Gap for X-ray Mammography

Abstract: X-ray mammography modality provides excellent low-contrast resolution images with low scatter radiation, making it the gold standard in diagnosing breast cancer. Anti-scatter grid and air gap techniques are typically used to further minimize the scatter radiation and improve image quality. Thus, Geant4 simulation was used to investigate the effectiveness of these techniques in removing scatter radiation in X-ray mammography. The effectiveness of an anti-scatter grid was evaluated using the Bucky factor, where it linearly increased with increasing the anti-scatter grid ratio. It was found that increasing the grid frequency affects the Bucky factor depending on the design of the grid ratio. This research proved that designing an anti-scatter grid with high grid frequency (80 lp/mm), low grid ratio (2:1), and proper orientation minimized common anti-scatter grid artifacts. The effectiveness of the air gap technique was also evaluated using the air gap dose factor. It increased non-linearly with increasing magnification. This research validated that using smaller pixel sizes and small focal spot sizes improved spatial resolution with magnification. Our simulation validated that the anti-scatter grid and air gap were effective techniques in removing scatter radiation. By comparing these techniques, the anti-scatter grid was more effective in removing scatter radiation at the expense of increasing the radiation absorbed dose with the exception of 2.0 magnification. It’s recommended to be extremely cautious when using 2.0 magnification or a grid ratio higher or equal to 8:1. These parameters may cause the radiation absorbed dose to be increased by several folds. Keywords: Geant4, Gate, X-ray mammography, Scatter removal, Anti-scatter grid, Air gap.

First Report ofLasiodiplodia hormozganensisCausing Leaf Spot Disease onAreca catechuin China.

The areca palm (Areca catechu L.) is one of the significant cash crops in Hainan Province (China), and a valuable tropical medicinal plant (Cao et al. 2020). In September 2020, spots were found on about 80% of the area of the leaves in a 1,000-acre plantation of areca palms in Haikou City, Hainan Province, and the average incidence was 25%. Initially, Elliptical or irregular dark brown spots appeared on the leaves, with an average size of about 1.5 cm2. With the further expansion of the disease, the spot turned light brown in the center with dark brown edges and a prominent yellow halo. Later stage of the disease, the spots became grayish-white in the center, with obvious whorls, on which many small black spots (pycnidia) were scattered. Eventually the leaves dried out. Ten leaves with typical symptoms were collected from the field. Lesion marginal tissues (5×5 mm2) were surfaced sterilized in 75% ethanol for 20 s, followed by 4 min in 1% NaClO, rinsed 3 times with sterile water, plated on PDA and incubated at 28 ℃. A fungus was isolated with a 98% isolation rate. This strain was named HNAC-5. Subcultures were 80 mm in diameter, white, villous, and neatly edged, after two days of incubation at 28 ℃ in dark. Pycnidia were solitary or clustered in stromata, with orifices that oozed black liquid. Conidiogenous cells were colorless and short cylindrical. Conidia unicellular, initially hyaline, aseptate, ellipsoid to ovoid with granular content, becoming pigmented, 1-septate with longitudinal striations, and measuring 20-31×10-13 μm (n=100). These morphological characteristics were similar to Lasiodiplodia spp. (Abdollahzadeh et al. 2010). The internal transcribed spacer region of rDNA, β-tubulin gene, and translation elongation gene were amplified using ITS1/ITS4, Bt2a/Bt2b, and EF1-728F/EF1-986R primers, respectively (Alves et al. 2008; Glass and Donaldson 1995; White et al. 1990). The resulting sequences were deposited in GenBank under accession numbers OR272043, OR282568, and OR282567. BLAST analysis showed that the three sequences of HNAC-5 were more than 99% similar to strain CBS 124709 of L. hormozganensis. Phylogenetic analysis was performed using the maximum likelihood method based on the three-gene combined dataset with MEGA 7.0 software. The results indicated that HNAC-5 was grouped in the same clade as otherL. hormozganensis Abdollahzadeh, Zare & A.J.L. Phillips. Pathogenicity test was carried out on 15 healthy leaves by in vivo inoculation. Ten leaves were pricked with a sterile needle and divided into group 1 and 2. The remaining five uninjured leaves were group 3. Group 1 and 3 were inoculated with 5-mm-diameter mycelial plugs obtained from 3-day cultures, and group 2 treated with PDA plugs served as controls. Fifteen leaves were cultured at 28°C and 100% relative humidity. After 5 days, leaves of group 1 showed symptoms of the disease and on the tenth day showed the same symptoms as the initial onset of the disease in the field, while leaves of Group 2 and 3 showed no symptoms. Pathogenicity tests were conducted three times with the same results. L. hormozganensiswas re-isolated from the inoculated symptomatic leaves, thus, Koch's postulates were confirmed. In China, L. hormozganensis has been reported to cause Bougainvillea spectabilis Willd. branch blight disease (Li et al. 2015), and Scaevola taccada (Gaertn.) Roxb. leaf spot disease (Zhang et al. 2020). To our knowledge, this is the first report of L. hormozganensiscausing leaf spot disease onA. catechuin China.

A survey for variable young stars with small telescopes – IX. Evolution of spot properties on YSOs in IC 5070

ABSTRACT We present spot properties on 32 periodic young stellar objects in IC 5070. Long term, ∼5 yr, light curves in the V, R, and I-bands are obtained through the HOYS (Hunting Outbursting Young Stars) citizen science project. These are dissected into 6 months long slices, with 3 months oversampling, to measure 234 sets of amplitudes in all filters. We fit 180 of these with reliable spot solutions. Two thirds of spot solutions are cold spots, the lowest is 2150 K below the stellar temperature. One third are warm spots that are above the stellar temperature by less than ∼2000 K. Cold and warm spots have maximum surface coverage values of 40 per cent, although only 16 per cent of warm spots are above 20 per cent surface coverage as opposed to 60 per cent of the cold spots. Warm spots are most likely caused by a combination of plages and low-density accretion columns, most common on objects without inner disc excess emission in K − W2. Five small hot spot solutions have <3 per cent coverage and are 3000–5000 K above the stellar temperature. These are attributed to accretion, and four of them occur on the same object. The majority of our objects are likely to be accreting. However, we observe very few accretion hot spots as either the accretion is not stable on our time-scale or the photometry is dominated by other features. We do not identify cyclical spot behaviour on the targets. We additionally identify and discuss a number of objects that have interesting amplitudes, phase changes, or spot properties.

Intelligent color image analysis of sintered ores for simple and rapid determination of Fe3O4 concentration

A simple determination of the Fe3O4 concentrations of sintered ores using color images of the samples has been explored. Sintered ore is mainly composed of Fe2O3 (red), Fe3O4 (black), and other white inorganic oxides, so the color of sintered ore could be representative of the relative abundance of the constituents. Two important challenges were addressed to achieve reliable quantitative color image analysis. First, minute dents and bumps (embosses) exist on the sample surface due to inconsistent particle sizes and particle agglomeration, thereby generating dark shadows. Second, small white spots corresponding to inorganic oxide particles were spread throughout acquired images. The white spots yield very high RGB values, which would hamper the translation of the real sample color originating from the iron oxides. Therefore, the segmentations of particle agglomeration-induced shadows and white spots in the sample images were separately executed using Otsu's method and modified fuzzy C-means (MFCM), respectively. Then, color moments and derived variables from the segmented images were employed to determine Fe3O4 concentrations (6.5–10.5 wt%) using extreme gradient boosting (XGBoost). The predicted concentrations from the color analysis correlated well with reference concentrations determined using conventional titration, with a root mean square error of prediction (RMSEP) of 0.39 wt%.

Process parameter optimization for laser directed energy deposition (LDED) of Ti6Al4V using single-track experiments with small laser spot size

Single-track experiments are routinely used in the optimization of process parameters in additive manufacturing processes. Most of the process parameter optimization studies use a laser spot size of 1 mm or more. Since laser spot size affects the input energy density and in turn the efficiency of the deposition process, it is important to develop process maps every time a laser of different spot sizes is used. In this work, we determine the process maps for a laser of 0.6 mm spot size. By combining the process maps and the metallographic inspection, we estimate the optimum process parameters (laser power, scan speed, powder feed rate) for building Ti6Al4V components using powder-based laser-directed energy deposition(LDED). Single-tracks corresponding to 64 different parameter combinations are deposited. After eliminating the process parameter combinations resulting in defective tracks, the optimum process parameters of 300 W laser power and 720 mm min−1 scan speed is established by considering the relationship between the process parameters and the geometrical features of the deposit. The experimental results are then used to calibrate the modeling parameters of a three-dimensional finite element model for simulating the deposition process.

A Feasibility Test of the Disposable Drug Daughter Plate Combined with 384‐Pillar Plate for Patient‐Derived Organoid‐Based High Throughput Screening

AbstractA disposable daughter plate is developed for robotic organoid‐based high‐throughput screening (HTS). Previously, daughter drug plates are prepared using mother drug plates in conventional HTS. During each screening, the mother drug plate is thawed, a certain amount of the drug is transferred to the daughter plate, and frozen again. Drug manufacturing involves drug transfer processes that may result in drug damage owing to redissolution. Thus, disposable daughter plates are created by dispensing small drug spots into the well plates and freezing them. The cells at the Matrigel dorms of the pillar plate are easily exposed to the drugs by immersing the pillars. Unlike previously reported similar methods, it is verified that HTS‐based drug response analysis is possible by applying the proposed disposable daughter plate to breast cancer patient‐derived organoids (PDOs). And it is also verified the long‐term stability of disposable daughter plates (up to 3 months) in 3D cell culture system using patient‐derived cells (PDO). The drug response results are quantified using normalized area under curve values, while the experimental reproducibility of the disposable daughter plates is evaluated using the coefficient of variation and a simple linear regression test. Thus, the proposed disposable daughter plate allows reproducible drug efficacy analysis.

Neglect of Small Spots Remains an Explanation of the Difference Between SOON and RGO Spot Areas

I point out that the objection of Györi et al. to my finding that neglect of small spots could explain much of the puzzling difference between Royal Greenwich Observatory and Solar Optical Observation Network spot areas is not valid because their analysis was limited to only 1974–76, when activity was low. The 40%–50% difference occurs only at higher activity levels.

Development of an MR-Guided Focused Ultrasound (MRgFUS) Lesioning Approach for the Fornix in the Rat Brain

Objective: High-intensity magnetic resonance-guided focused ultrasound (MRgFUS) is a noninvasive therapy to lesion brain tissue, used clinically in patients and preclinically in several animal models. Challenges with focused ablation in rodent brains can include skull and near-field heating and accurately targeting small and deep brain structures. We overcame these challenges by creating a novel method consisting of a craniectomy skull preparation, a high-frequency transducer (3 MHz) with a small ultrasound focal spot, a transducer positioning system with an added manual adjustment of ∼0.1 mm targeting accuracy, and MR acoustic radiation force imaging for confirmation of focal spot placement.Methods: The study consisted of two main parts. First, two skull preparation approaches were compared. A skull thinning approach (n=7 lesions) was compared to a craniectomy approach (n=22 lesions), which confirmed a craniectomy was necessary to decrease skull and near-field heating. Second, the two transducer positioning systems were compared with the fornix chosen as a subcortical ablation target. We evaluated the accuracy of targeting using histological methods from a high-frequency transducer with a small ultrasound focal spot and MR acoustic radiation force imaging.Results: Comparing a motorized adjustment system (∼1 mm precision, n=17 lesions) to the motorized system with an added micromanipulator (∼0.1 mm precision, n=14 lesions), we saw an increase in the accuracy of targeting the fornix by 133%. The described work allows for repeatable and accurate targeting of small and deep structures in the rodent brain, such as the fornix, enabling the investigation of neurological disorders in chronic disease models.

Design method of a focusing dielectric lens antenna and temperature increment measurement at the focusing spot

In radio wave hyperthermia therapy, array antenna configuration was mainly studied to generate a small spot at the diseased part. Array antennas have the flexibility in controlling radiation performance, such as spot positions, by using their numerous radiating elements. However, the flexibility is achieved at the expense of antenna structure complexity. On the other hand, a lens antenna can concentrate radio waves into a small spot by forming a lens shape. The simplicity of a lens antenna structure lends itself to easy handling in a practical application. Moreover, the frequency independence of the lens antenna allows for a more flexible selection of hyperthermia therapy frequencies. Therefore, the lens antenna is selected as a focusing antenna in this paper. The lens shaping method and the temperature increment measurement are the main contents of this paper. The designed lens has a diameter of 30 cm, a focusing distance of 30 cm, and a working frequency of 2.45 GHz. A thin lens design method is applied to reduce lens weight. Firstly, the focusing ability of the designed lens is ensured by comparing the spot size results of electromagnetic (EM) simulation with its theoretical value. A spot size of 1.77 cm is obtained in both cases. Next, the temperature increment is examined by EM simulations. The temperature at the 2 cm tumor was increased to 41 °C from the human body temperature of 37 °C by an input power of 10 Watts (W). For the temperature increment measurement, a tumor within human body phantom is utilized and the available input power is reduced to 4 W. The tumor temperature increased from 21.5 °C of room temperature to 24.4 °C, which was captured by a thermal imaging camera. As a result, the functionality of the lens antenna for hyperthermia therapy is verified.