Small Angles Research Articles

Usefulness Assessment of Automated Strabismus Angle Measurements Using Innovative Strabiscan Device.

The variability of the obtained results of manual tests assessing the angle of strabismus depends on the experience, skills, and training of the examiner. The authors hope that this new measuring device will provide a more sensitive and repeatable method for detecting small strabismus angles compared to the gold standard-PCT. The purpose of this article is to present an innovative strabismus angle demonstration device, called Strabiscan, to provide automated measurements of eye deviation and to compare the obtained results of these measurements to the traditional manual method. For patients with manifest strabismic disease (n = 30) and a group of healthy subjects (n = 30), a detailed history was taken and routine ophthalmologic examinations were performed, including best-corrected distance visual acuity, assessment of refractive error using an autorefractometer after cycloplegia, biomicroscopic evaluation of the anterior segment of the eye and evaluation of the eye fundus by indirect ophthalmoscopy. Subsequently, each patient and healthy subject was subjected to a prismatic cover-uncover test using a manual method, after which the presence of strabismus was detected and its angle assessed using a Strabiscan demonstration device. In the control group using the Strabiscan demonstration device, small-angle latent strabismus ≤ 3DP was diagnosed in 83% of patients, while >3DP was found in 13%. In contrast, using the prismatic cover-uncover test, latent strabismus ≤ 3DP was diagnosed in only 13% of patients, and latent strabismus with an angle > 3DP was found in 13% of patients. No statistically significant differences were noted in the measurements of strabismus angles made by the different methods. The Strabiscan demonstration device allows quick and accurate assessment of the strabismus angle. Compared to the prismatic cover-uncover test, it has a higher sensitivity for detecting low-angle latent strabismus. Measurements with the Strabiscan do not require the presence of additional assistants for the test.

Effectiveness of Strabismus Surgery in Intermittent Exotropia and Factors Influencing Outcome.

Intermittent exotropia (IXT) is known to relapse after surgery. No factors to predict or prevent recurrence are known with certainty. This study investigated surgical outcome, potential influencing factors, and reoperation rate in patients with IXT. Medical records of 537 patients who underwent surgery for IXT from 2000 to 2022 with preoperative angles of exodeviation of 6 to 50 prism diopters (PD) were retrospectively studied. Multivariate regression analyses of factors influencing surgical outcome on postoperative day 1 (POD1) and reoperation rate were performed. A Kaplan-Meier analysis was performed to illustrate the reoperation rate. After the first surgery, 83.8% of patients had a successful surgical outcome on POD1 (esodeviation ≤ 5 PD or exodeviation ≤ 10 PD). Logistic regression analysis revealed that small preoperative angles of exodeviation increased the probability for surgical success. Follow-up data at different times (4 days-20 years) after surgery were available for 176 patients: 40 patients were still in the range of surgical success, 133 patients had exotropia > 10 PD. Of the follow-up patients, 65 (12.1%) underwent reoperation. A total of 8.5% had their reoperation within one year after the first surgery, 52.9% within five years. Cox regression analysis revealed that large preoperative angles of exodeviation, far/near incomitance and alphabet pattern strabismus increased the risk of reoperation. Most patients achieved surgical success on POD1, yet the squint angles often increased after surgery, resulting in reoperation in some patients. Prospective studies are needed for a better assessment of pre-, peri- and postoperative factors for surgical success in IXT.

Linear optical properties of organic microcavity polaritons with non-Markovian quantum state diffusion

Abstract Hybridisation of the cavity modes and the excitons to polariton states together with the coupling to the vibrational modes determine the linear optical properties of organic semiconductors in microcavities. In this article we compute the refractive index for such system using the Holstein–Tavis–Cummings model and determine then the linear optical properties using the transfer matrix method. We first extract the parameters for the exciton in our model from fitting to experimentally measured absorption of a 2,7-bis[9,9-di(4-methylphenyl)-fluoren-2-yl]-9,9-di(4-methylphenyl) fluorene (TDAF) molecular thin film. Then we compute the reflectivity of such a thin film in a metal clad microcavity system by including the dispersive microcavity mode to the model. We compute susceptibility of the model systems evolving just a single state vector by using the non-Markovian quantum state diffusion. The computed location and height of the lower and upper polaritons agree with the experiment within the estimated errorbars for small angles ( ≤ 30 ° ) $(\le 30{}^{\circ})$ . For larger angles the location of the polariton resonances are within the estimated error.

Towards adaptive drag reduction of a flat-back 3D bluff body in variable pitch and crosswind by flow orientation at the base separation

The sensitivity of the drag to the rear design of a flat-back body is investigated under different body attitudes defined by the pitch (-1.5∘,0∘,+1.5∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$-1.5^\\circ , 0^\\circ , +1.5^\\circ$$\\end{document}) and yaw (up to 15∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$15^\\circ$$\\end{document}). The rear design consists of taper angles at the top and bottom trailing edge varying from 0∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$0^\\circ$$\\end{document} (no taper) to 12.5∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$12.5^\\circ$$\\end{document}. Compared to the fixed optimal rear design that minimizes drag at the wind-aligned body attitude, the rear design adaptation to the change of attitude produces a noticeable drag reduction up to 5% depending on the pitch angle within a yaw range smaller than 2∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$2^\\circ$$\\end{document}. It is shown that this drag reduction is related to the vertical wake steady instability interfering with the rear design. For yaw larger than 2∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$2^\\circ$$\\end{document} and up to 12∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$12^\\circ$$\\end{document}, an almost constant drag reduction of 2% is found and shown to be a compromise between a beneficial pressure recovery on the flat base and a detrimental pressure drag on the tapers. At larger yaw angles and whatever the pitch angle is, there is no compromise anymore such that any taper angle different from 0∘\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$0^\\circ$$\\end{document} produces a drag increase leading eventually to the squareback rear design as the optimal design. Overall, the study emphasizes the potential of adaptive control of the top and bottom trailing edge tapers to arbitrary body attitude even at small yaw angles when the pitch is varied.

Studies of Auxetic Structures Assembled from Rotating Rectangles.

The subject of the work is analysis, which presents a renowned auxetic structure based on so-called rotating polygons, which has been subject to modification. This modification entails introducing pivot points on unit cell surfaces near rectangle corners. This innovative system reveals previously unexplored correlations between Poisson's ratio, the ratio of rectangle side lengths, pivot point placement, and structural opening. Formulas have been derived using geometric relationships to compute the structure's linear dimensions and Poisson's ratio. The obtained findings suggest that Poisson's ratio is intricately tied to the structure's opening degree, varying as the structure undergoes stretching. Notably, there are critical parameter limits beyond which Poisson's ratio turns positive, leading to the loss of auxetic properties. For elongated rectangles, extremely high negative Poisson's ratio values are obtained, but only for small opening angles, while with further stretching, the structure loses its auxetic properties. This observed trend is consistent across a broad category of structures comprised of rotating rectangles.

Generalized GHZ entanglement states for optimal rotation detection of quantum spin systems using majorana representation

A multitude of engineering and scientific applications require the estimation of an unknown axis’ rotation, known as the reference frame alignment problem. These problems can be categorized using the quantum Cramer–Rao bound. Detecting rotations is typically focused on smaller angles, as errors are more significant in this range. Therefore, selecting the optimal combination of measurement techniques based on a quantum entangled state for a particular setup is a critical step. This paper proposes a linear combination of anticoherence and coherence measures based on the generalized GHZ entanglement states. The anticoherence measures, optimizes the spin system’s average fidelity in detecting rotated states, while the overlap between states in any spin number is minimal. The optimal quantum rotosensors are characterized by the minimal average fidelity given by the overlap before and after averaging over all directions. The individual subsystems’ states have substantial overlap with GHZ states, making the generalized GHZ state the entanglement quantum spin-j state with coherence decay rate ϵ beneficial in finding the optimal rotation detection on noncoherent entanglement state.

High Mobility Emissive Excimer Organic Semiconductor Towards Color-Tunable Light-Emitting Transistors.

Organic light-emitting transistors (OLETs) are highly integrated and minimized optoelectronic devices with significant potential superiority in smart displays and optical communications. To realize these various applications, it is urgently needed for color-tunable emission in OLETs, but remains a great challenge as a result of the difficulty for designing organic semiconductors simultaneously integrating high carrier mobility, strong solid-state emission, and the ability for potential tunable colors. Herein, a high mobility emissive excimer organic semiconductor, 2,7-di(2-anthryl)-9H-fluorene (2,7-DAF) was reasonably designed by introducing a rotatable carbon-carbon single bond connecting two anthracene groups at the 2,7-sites of fluorene, and the small torsion angles simultaneously guarantee effective conjugation and suppress fluorescence quenching. Indeed, the unique stable dimer arrangement and herringbone packing mode of 2,7-DAF single crystal enables its superior integrated optoelectronic properties with high carrier mobility of 2.16 cm2 ⋅ V-1 ⋅ s-1 , and strong excimer emission with absolute photoluminescence quantum yield (PLQY) of 47.4 %. Furthermore, the voltage-dependent electrically induced color-tunable emission from orange to blue was also demonstrated for an individual 2,7-DAF single crystal based OLETs for the first time. This work opens the door for a new class of high mobility emissive excimer organic semiconductors, and provides a good platform for the study of color-tunable OLETs.

High Mobility Emissive Excimer Organic Semiconductor Towards Color‐Tunable Light‐Emitting Transistors

AbstractOrganic light‐emitting transistors (OLETs) are highly integrated and minimized optoelectronic devices with significant potential superiority in smart displays and optical communications. To realize these various applications, it is urgently needed for color‐tunable emission in OLETs, but remains a great challenge as a result of the difficulty for designing organic semiconductors simultaneously integrating high carrier mobility, strong solid‐state emission, and the ability for potential tunable colors. Herein, a high mobility emissive excimer organic semiconductor, 2,7‐di(2‐anthryl)‐9H‐fluorene (2,7‐DAF) was reasonably designed by introducing a rotatable carbon–carbon single bond connecting two anthracene groups at the 2,7‐sites of fluorene, and the small torsion angles simultaneously guarantee effective conjugation and suppress fluorescence quenching. Indeed, the unique stable dimer arrangement and herringbone packing mode of 2,7‐DAF single crystal enables its superior integrated optoelectronic properties with high carrier mobility of 2.16 cm2 ⋅ V−1 ⋅ s−1, and strong excimer emission with absolute photoluminescence quantum yield (PLQY) of 47.4 %. Furthermore, the voltage‐dependent electrically induced color‐tunable emission from orange to blue was also demonstrated for an individual 2,7‐DAF single crystal based OLETs for the first time. This work opens the door for a new class of high mobility emissive excimer organic semiconductors, and provides a good platform for the study of color‐tunable OLETs.

CBCT vs panoramic radiography in assessment of impacted upper canine and root resorption of the adjacent teeth: A systematic review and meta-analysis.

The IC may cause reabsorption of adjacent teeth; therefore detailed assessment of its position would enhance decision-making in the clinical workflow. The objective was to compare cone-beam computed tomography (CBCT) and panoramic radiography (PR) in assessing the position of the impacted upper canine (IC) and root resorption of adjacent teeth. Pubmed, EMBASE, Science Direct, Web of Science, and SCOPUS databases were searched for studies published before August 2023. Studies that evaluated IC by using both imaging methods were included. For statistical analysis, the Comprehensive Meta-Analysis software (Biostat; Englewood, NJ) was used, p≤0.05. A total of 17 articles were included, with 877 patients (average age of 17.6 years) and 1,115 ICs. The most frequent mesio-distal location of the IC was in sectors 3 and 4. The meta-analysis was performed with eleven studies. CBCT was more accurate in determining the labio-palatal position compared with PR (p<0.001) (CI 95%; 60% in labial position, 0.254-0.542, OR:0.398; 56% in palatal position, 0.350-0.533, OR:0.441; 78% in mid-alveolus position, 0.188-0.234, OR:0.221). For IC angulation to the midline, CBCT showing a smaller and more accurate angle than PR (p<0.001) (CI 95%, 18.008-33.686). IC angulation to the occlusal plane and lateral incisor, there was smaller angle in PR compared to CBCT (p<0.001) (CI 95%, 51.292-65.934; CI 95%, 30.011-55.954). With PR, fewer cases of root resorption of teeth adjacent to the IC were visualized compared with CBCT (86% less) (p<0.001) (CI 95%, 0.089-0.186; OR value: 0.138; n=1049). CBCT showed statistically significant differences compared to PR in the assessment of IC position and root resorption of adjacent teeth. CBCT provided clinically relevant information that may contribute to diagnosing and planning IC treatment when PR was not sufficient. Key words:Canine teeth, tooth, impacted, panoramic radiography, Cone-beam computed tomography, systematic review, meta-analysis.

Laser Doppler Vibrometry for detecting survivors in hard-to-reach environments

Search and Rescue (SAR) operations in remote and hazardous environments are crucial for the rapid and accurate location of survivors, with a timely response being essential during the “golden hours” following a disaster. Recent technological advancements offer innovative solutions to enhance SAR efforts. This study aims to investigate the use of Laser Doppler Vibrometry (LDV) as a tool for remote vital sign assessment and explore its integration with Machine Learning (ML) techniques for accurate individual identification in challenging SAR scenarios. Various scenarios, such as different distances, difficult angles, and non-ideal body placements, are explored in the study to faithfully recreate hard-to-reach environments. Two models, the OS-Model trained with data acquired under optimal conditions and the AS-Model trained with data acquired including all the different conditions studied, were compared to evaluate classification performance. Results indicate that the LDV-assisted ML approach, particularly the AS-Model, exhibits promising outcomes with a higher median prediction accuracy of 0.93, emphasizing the importance of diverse and comprehensive datasets. However, limitations regarding accuracy at greater distances, smaller angles, and lower-body laser targeting must be considered for practical implementation.

Evaluation of the effect of diode laser application on the hydrophilicity, surface topography, and chemical composition of titanium dental implant surface.

Attempts have been made to decontaminate the implant surface by using diode lasers. However, the parameters that provide efficient decontamination without altering the topography or surface characteristics of titanium implants are still unclear. The aim of the present study was to evaluate the effect of altering the power of diode laser (940nm) application on the hydrophilicity, surface topography, and chemical composition of sandblasted, large grit, acid-etched (SLA) treated titanium alloy implant surface. Thirty-six SLA-treated titanium discs (Dentis Co., Ltd.) were used in this study. The hydrophilicity of all discs was measured by using a contact angle goniometer (190 CA; Rame-hart Co, Ltd). Discs were randomly divided into four groups (n = 9 each) based on the power of the diode laser used. Group I (control, no lasing group), group II: treated with 1W power, group III: 2W power, and group IV: 3W power. The chemical composition of the SLA discs was evaluated by using energy dispersive x-ray spectroscopy (EDX) before laser application. Hydrophilicity was reevaluated after the application of laser irradiation. The surface topography of all discs was examined. Changes in the chemical composition of the titanium discs were investigated following the lasing procedure. Morphometric analysis of the surface area (μm2 ) of the indentations created following laser application was also evaluated. Data were collected and the Shapiro-Wilk test of normality was used. Comparisons between the four study groups were done by using the Kruskal-Wallis test, while that to evaluate the morphometric analysis of the surface area was done by using One-way ANOVA (P<0.05). The average contact angle of the drop of distilled water to the SLA discs significantly decreased after laser treatment (P<0.05). The largest contact angle was measured in the control group, followed by the 1W group, and the 2W group. The smallest angle was measured in the 3W group. Considerable surface alterations such as melting and flattening were observed on examination of the surface topography of the 3W group followed by the 2W group. The least changes were observed in association with the 1W group in comparison to the control group. The EDX analysis showed the appearance of peaks of the oxygen and carbon elements after the lasing procedure with the highest percentage in the 3W group. The average of the surface area of the created indentations significantly increased with increasing the power of the diode laser used (P<0.05). The application of diode laser (940nm) with 2W and 3W powers significantly altered the hydrophilicity, the surface topography, and the chemical composition of titanium discs. Diode laser (940nm) with 1W power can be safely used on SLA titanium implant surfaces with no damaging effect on the surface topography or hydrophilicity.

Cerebrovascular responses to a 90° tilt in healthy neonates

BackgroundTilts can induce alterations in cerebral hemodynamics in healthy neonates, but prior studies have only examined systemic parameters or used small tilt angles (<90°). The healthy neonatal population, however, are commonly subjected to large tilt angles (≥90°). We sought to characterize the cerebrovascular response to a 90° tilt in healthy term neonates.MethodsWe performed a secondary descriptive analysis on 44 healthy term neonates. We measured cerebral oxygen saturation (rcSO2), oxygen saturation (SpO2), heart rate (HR), breathing rate (BR), and cerebral fractional tissue oxygen extraction (cFTOE) over three consecutive 90° tilts. These parameters were measured for 2-min while neonates were in a supine (0°) position and 2-min while tilted to a sitting (90°) position. We measured oscillometric mean blood pressure (MBP) at the start of each tilt.ResultsrcSO2 and BR decreased significantly in the sitting position, whereas cFTOE, SpO2, and MBP increased significantly in the sitting position. We detected a significant position-by-time interaction for all physiological parameters.ConclusionA 90° tilt induces a decline in rcSO2 and an increase in cFTOE in healthy term neonates. Understanding the normal cerebrovascular response to a 90° tilt in healthy neonates will help clinicians to recognize abnormal responses in high-risk infant populations.ImpactHealthy term neonates (≤14 days old) had decreased cerebral oxygen saturation (~1.1%) and increased cerebral oxygen extraction (~0.01) following a 90° tilt.We detected a significant position-by-time interaction with all physiological parameters measured, suggesting the effect of position varied across consecutive tilts.No prior study has characterized the cerebral oxygen saturation response to a 90° tilt in healthy term neonates.

Waveform Imaging Based on Linear Forward Representations for Scalar Wave Seismic Data

The current reverse-time migration, which is based on wave equations for imaging wavefields, employs an imaging formula derived from Claerbout’s imaging principle. This imaging formula is only valid for plane waves with small incident angles on the perfectly flat reflecting surface. However, the complexity of seismic wave propagation may lead to situations that do not meet this requirement. Therefore, this paper divides the subsurface into local scattering and reflecting bodies. It proposes linear forward representations for scattering and reflection data based on perturbations in the physical parameters and wave impedance, respectively. To further describe the effect on the reflecting body boundary, the local reflection coefficient is defined and the linear forward representation for the reflection data based on it is obtained. After that, the proposed linear forward representations are used as the forward equations for the linear inverse of the seismic data, and the seismic data waveform imaging method is developed based on linear inversion theory. At the same time, the specific waveform imaging calculation formulas for scalar wave scattering data and scalar wave reflection data are provided and validated via numerical experiments. Compared with the current reverse-time migration, waveform migration not only has the correct phase and higher resolution in theory but also does not increase the computational complexity. To some extent, it improves the deficiencies of the current structural imaging and provides a basis for subsurface lithological imaging.

Magnetic Sensor Angle Adjustment to Improve Corrosion under Insulation Detection

A large portion of the pipe infrastructure used in the chemical processing industry is susceptible to corrosion under insulation (CUI). Eddy current-based magnetic sensing is one of the methods that can be used as an early detector of this corrosion. However, the large sensor-to-pipe distances used in this method, due to the presence of insulation, limits the sensitivity to corrosion. This paper will describe the development of instrumentation and methods based on eddy current sensing with thin-film magnetic sensors. In particular, it focuses on the influence of the sensor angle relative to the radial magnetic field. The influence of this parameter on the amplitude of the measured signal was investigated by both finite element simulations and experimental observations. The measured magnetic field was found to be highly sensitive to small changes in sensor angle, with the estimated depth of a defect changing at a rate of 11.2 mm/degree of sensor rotation for small angles. It is also shown that a sensor aligned with the radial direction should be avoided, with an optimal sensor angle between 0.5 and 4 degrees. With the sensor in this angle range, the simulations have shown it should be possible to resolve the depth of corrosion to a resolution of 0.1 mm.

Experimental investigation of wind turbine stress and power characteristics under dynamic changes in wind direction

ABSTRACT The dynamic inlet conditions of variable wind direction had an obvious influence on the response of wind turbine stress and power, and accurately analyzing their changing characteristics is of great significance to enhancing wind turbines’ stability and efficient operation. Experiments were performed in a wind tunnel, where the wind turbine was mounted on a rotating platform to simulate dynamic changes in wind direction at prescribed speeds and angles. The wind turbine’s stress and power were measured. Results show that the stress was minimally reduced by 4.4% (tower) and 1.7% (blade) when the wind direction change angle was small. Maximum stress reduction of 92% (tower) and 93% (blade) with increasing wind direction change angle. As the wind direction change speed increased, the magnitude of the drop in blade stress decreased by 6% ~32%. The decrease in power coefficient and rotational speed at small wind direction change angles and large wind direction change speeds were not significant, and the fluctuations were more obvious. The coupling of aerodynamic deterioration and inertial effects during dynamic changes in wind direction was one of the main reasons for the variations in the wind turbine power and stress response.

Cathodoluminescence and tip-plasmon resonance of Bi2Te3 triangular nanostructures.

Bi2Te3, as a topological insulator, is able to support plasmonic emission in the visible spectral range. Thin Bi2Te3 flakes can be exfoliated directly from a Bi2Te3 crystal, and the shape of Bi2Te3 flakes can be further modified by focused ion beam milling. Therefore, we have designed a Bi2Te3 triangular antenna with distinct tip angles for the application of plasmonic resonance. The plasmonic emission of the Bi2Te3 triangular antenna is excited and investigated by cathodoluminescence in the scanning electron microscope. Enhanced tip plasmons have been observed from distinct tips with angles of 20º, 36º, 54º, 70º, and 90º, respectively. Due to the confinement of geometric boundaries for oscillating charges, the resonant peak position of tip plasmon with a smaller angle has a blue shift. Moreover, the dependence of plasmonic behavior on the excitation position has been discovered as well. This research provides a unique approach to fabricate Bi2Te3 nanostructures and manipulate the corresponding plasmonic properties.

Tuning commensurability in twisted van der Waals bilayers.

Moiré superlattices based on van der Waals bilayers1-4 created at small twist angles lead to a long wavelength pattern with approximate translational symmetry. At large twist angles (θt), moiré patterns are, in general, incommensurate except for a few discrete angles. Here we show that large-angle twisted bilayers offer distinctly different platforms. More specifically, by using twisted tungsten diselenide bilayers, we create the incommensurate dodecagon quasicrystals at θt = 30° and the commensurate moiré crystals at θt = 21.8° and 38.2°. Valley-resolved scanning tunnelling spectroscopy shows disparate behaviours between moiré crystals (with translational symmetry) and quasicrystals (with broken translational symmetry). In particular, the Kvalley shows rich electronic structures exemplified by the formation of mini-gaps near the valence band maximum. These discoveries demonstrate that bilayers with large twist angles offer a design platform to explore moiré physics beyond those formed with small twist angles.

Airfoil response to periodic vertical and longitudinal gusts

Gust response has consistently been a concern in engineering. Critical theories have been proposed in the past to predict the unsteady lift response of an airfoil experiencing vertical gusts by Atassi, and longitudinal gusts by Greenberg. However, their applicability for an airfoil with non-zero angles of attack still needs clarification. Thus, force measurements are conducted to examine these theories’ validity and quasi-steady corrections are applied to compensate potential disparities between the idealised and real flow conditions. Velocity measurements are performed to scrutinise the effect of gusts on the flow around the airfoil, and subsequently to reveal the underlying mechanism governing the airfoil's response to gust-induced perturbations. In the study, two pitching vanes are arranged upstream to generate periodic vertical and longitudinal gusts, whereas a downstream airfoil with angles of attack of 0–12° is subjected to two gust types. It is found that Greenberg's theory demonstrates superior predictive capability in pre-stall regimes, with the potential for its effectiveness to be expanded to post-stall regimes through theoretical refinements. In contrast, Atassi's theory exhibits significant deviations from experimental outcomes across the measured angles of attack. Nevertheless, a modified version of the theory aligns better with experimental results at small angles of attack, whereas substantial discrepancies persist as the angle of attack increases. In the pre-stall regime, the aerodynamic response of the airfoil to vertical gusts displays a linear correlation with the flow angle near the leading edge. In the post-stall regime, the vertical gust induces dynamic stall of the airfoil. The flow angle has an essential effect on the lift coefficient but it alone is inadequate to dictate the trend of the lift coefficient. The vorticity statistics show that negative vortex circulation strongly correlates with the lift coefficient. Thus, further correction of the theory or a new vortex model can be expected to predict the lift variation.

Modification of interlayer interaction in bilayer MoS2 due to monolayer WSe2 in heterostructures

The low-frequency interlayer vibration modes in bilayer-MoS2/monolayer-WSe2 heterostructures were investigated to study the modification of interlayer interactions due to the moiré periodicity. The interplay of the interlayer interaction within bilayer MoS2 and the interfacial interaction between the two materials results in rich features in the phonon spectra. Several shear and breathing modes are observed for samples with small twist angles (<10°), whereas only one shear and two breathing modes are observed for larger twist angles. For larger twist angles, the interfacial interaction between the two materials amounts to ∼75% of the intrinsic interlayer interaction between the MoS2 layers. The phonon spectrum evolves non-monotonically as the twist angle increases, which is explained with the help of atomistic calculations.

Reduction of multiple scattering of positively charged ultra relativistic particles channeling in planar fields of single crystals

Based on the theory of multiple scattering of positively charged particles channeled in the planes of a single crystal of silicon, calculations of the rms angle of scattering have been made for particles in the range of momenta 100–7000 GeV/c. As a result of the analysis, we find that the rms angle of multiple particle scattering can be represented by in the form of (Cl)1/w/ph, where p is the particle momentum, l is the crystal thickness and C,w,h are the constant coefficients. We show that these calculation results can be represented in a unified way using the found universal function. This function is shown to be in a good agreement with the experimental data. Furthermore, our analysis is consistent with the effect (predicted by Luboshits and Podgoretsky) of reducing multiple scattering of above-barrier particles moving at small angles to the planes of the crystal. In general, the obtained results give a simple and clear description of the scattering process under consideration.