Small Amounts Research Articles

Awareness and knowledge of drug decriminalization among people who use drugs in British Columbia: a multi-method pre-implementation study

BackgroundIn January 2023, British Columbia implemented a three-year exemption to Controlled Drugs and Substances Act, as granted by the federal government of Canada, to decriminalize the personal possession of small amounts of certain illegal drugs. This decriminalization policy, the first in Canada, was announced in response to the overdose emergency in British Columbia as a public health intervention that could help curb overdose deaths by reducing the impact of criminalization and increasing access to health and social services through stigma reduction.MethodsThe current multi-method study examines people who use drugs’ awareness and knowledge of British Columbia’s decriminalization model through cross-sectional quantitative surveys and qualitative interviews among people who use drugs from September–November 2022, immediately prior to the implementation of decriminalization.ResultsQuantitative findings show that two-thirds (63%) of people who use drugs were aware of the policy, but substantial knowledge gaps existed about the legal protections afforded (threshold amount, substances included, drug trafficking, confiscation). The qualitative findings suggest that people who use drugs misunderstood the details of the provincial decriminalization model and often conflated it with regulation. Results suggest that information sharing about decriminalization were minimal pre-implementation, highlighting areas for knowledge dissemination about people who use drugs' rights under this policy.ConclusionsGiven that decriminalization in British Columbia is a new and landmark reform, and that the success of decriminalization and its benefits may be undermined by poor awareness and knowledge of it, efforts to share information, increase understanding, and empower the community, may be required to promote its implementation and benefits for the community.

Barley variety interacts positively with floor malting to produce different malts and beers

Why was the work done: Floor malting maintains a small but notable market share due to its reputed contributions to beer flavour. These malts are viewed as premium products and are produced in both historic and contemporary floor maltings. Despite this, little work has been performed on floor malting to evaluate its effect on malt and subsequent beer quality and flavour. Accordingly, this work investigated whether floor malting produces distinct malts and beers relative to pneumatic maltings. How was the work done: A mini-floor malting protocol was developed to malt small quantities of grain in a repeatable system that produces malt comparable to the production scale. Two winter barley varieties (Lontra and Thunder) were used to understand whether there was a malting type by variety interaction effect on beer flavour. What are the main findings: Both floor and pneumatic malts produced similar malts and beers based on quality metrics and the differences found between malts were more attributable to variety and the respective rate of proteolysis. Sensory results showed that there was a significant malting type by variety interaction driving hedonic and descriptive sensory results. Why is the work important: These results suggest that while the different malting types produce analytically similar malt, selection of barley variety can be used to optimise the floor malting process to produce distinct beer flavour profiles.

Intrinsically Colored Polyimide Films Prepared by Embedding Chromophores on the Polymer Backbones

AbstractA versatile strategy of preparing colored polyimide (PI) films is developed by embedding colored monomers on the backbones of colorless substrate polymers. Intrinsically colored PI films of four colors—red, yellow, blue, and purple—are prepared by introducing relative chromophores to the substrate PI that are synthesized from 2,2′‐bis(trifluoromethyl)benzidine (TFMB) and 4,4′‐(hexafluoroisopropylidene) diphthalic anhydride (6FDA)—two widely used monomers for colorless and transparent PI films. In addition, a series of orange and green PI films are prepared by simple mixing of the red, yellow, or blue PIs. The properties of these colored PI films are characterized, exhibiting good mechanical, thermal, and solubility properties, as well as different color and brightness depending on the amounts and types of chromophores. The optical properties of these films are determined by UV–vis spectroscopy and Commission Internationale de I'Eclairage (CIE) Lab. It is demonstrated that the introduction of even small amounts of chromophores can afford spectrally colored films while maintaining the original benign properties of the substrate PIs.

Pneumococcal population genomics changes during the early time period of conjugate vaccine uptake in southern India.

Streptococcus pneumoniae is a major cause of invasive disease of young children in low- and middle-income countries. In southern India, pneumococcal conjugate vaccines (PCVs) that can prevent invasive pneumococcal disease began to be used more frequently after 2015. To characterize pneumococcal evolution during the early time period of PCV uptake in southern India, genomes were sequenced and selected characteristics were determined for 402 invasive isolates collected from children <5 years of age during routine surveillance from 1991 to 2020. Overall, the prevalence and diversity of vaccine type (VT) and non-vaccine type (NVT) isolates did not significantly change post-uptake of PCV. Individually, serotype 1 and global pneumococcal sequence cluster (GPSC or strain lineage) 2 significantly decreased, whereas serotypes 6B, 9V and 19A and GPSCs 1, 6, 10 and 23 significantly increased in proportion post-uptake of PCV. Resistance determinants to penicillin, erythromycin, co-trimoxazole, fluoroquinolones and tetracycline, and multidrug resistance significantly increased in proportion post-uptake of PCV and especially among VT isolates. Co-trimoxazole resistance determinants were common pre- and post-uptake of PCV (85 and 93 %, respectively) and experienced the highest rates of recombination in the genome. Accessory gene frequencies were seen to be changing by small amounts across the frequency spectrum specifically among VT isolates, with the largest changes linked to antimicrobial resistance determinants. In summary, these results indicate that as of 2020 this pneumococcal population was not yet approaching a PCV-induced equilibrium and they highlight changes related to antimicrobial resistance. Augmenting PCV coverage and prudent use of antimicrobials are needed to counter invasive pneumococcal disease in this region.

Hydrate phase equilibrium conditions for H2S and CO2 gas mixture removal from natural gas: modeling and optimization study

In this study, for the first time, a comprehensive mathematical modeling of the optimal conditions for the gas hydrates formation of hydrogen sulfide (H2S) and carbon dioxide (СО2) was carried out with the aim of them removing from natural gas. The study was carried out on a model gas mixture close to the natural gas composition: CH4 – C2H6 – С3Н8 – n-С4Н10 – СО2 – H2S – N2. A temperature range of 268.15–283.15 К and a pressure range of 2.00–8.00 MPa were investigated. The efficiency was assessed based on the gas hydrate distribution coefficients. It was found that the gas hydrate extraction of H2S is more significantly affected by the concentration of H2S in the initial gas mixture. The gas hydrate extraction of СО2 is more significantly affected by the temperature and pressure of the gas separation unit. The maximum gas hydrate distribution coefficient of H2S is 42.05 at T = 268.15 K, p = 8.00 MPa. The maximum gas hydrate distribution coefficient of СО2 is 0.49 at T = 283.15 K, p = 8.00 MPa. Due to the small amounts of CO2 entrapped in gas hydrates, a scheme that combines a multi-stage hydrate-based and membrane technology has been suggested to purify natural gas further.

Characterization of the Fusarium circinatum biofilm environmental response role.

The capacity to form biofilms is a common trait among many microorganisms present on Earth. In this study, we demonstrate for the first time that the fatal pine pitch canker agent, Fusarium circinatum, can lead a biofilm-like lifestyle with aggregated hyphal bundles wrapped in extracellular matrix (ECM). Our research shows F. circinatum's ability to adapt to environmental changes by assuming a biofilm-like lifestyle. This was demonstrated by varying metabolic activities exhibited by the biofilms in response to factors like temperature and pH. Further analysis revealed that while planktonic cells produced small amounts of ECM per unit of the biomass, heat- and azole-exposed biofilms produced significantly more ECM than nonexposed biofilms, further demonstrating the adaptability of F. circinatum to changing environments. The increased synthesis of ECM triggered by these abiotic factors highlights the link between ECM production in biofilm and resistance to abiotic stress. This suggests that ECM-mediated response may be one of the key survival strategies of F. circinatum biofilms in response to changing environments. Interestingly, azole exposure also led to biofilms that were resistant to DNase, which typically uncouples biofilms by penetrating the biofilm and degrading its extracellular DNA; we propose that DNases were likely hindered from reaching target cells by the ECM barricade. The interplay between antifungal treatment and DNase enzyme suggests a complex relationship between eDNA, ECM, and antifungal agents in F. circinatum biofilms. Therefore, our results show how a phytopathogen's sessile (biofilm) lifestyle could influence its response to the surrounding environment.

Effect of Prestrain on Payne Effect and Hysteresis Loss of Carbon-Black-Filled Rubber Vulcanizates: Measurements and Modeling.

The performance of a viscoelastic damper is governed by the mechanical properties of the viscoelastic material, which are sensitive to prestrain. Among viscoelastic materials, carbon black (CB)-filled rubber vulcanizate is commonly used in structural applications. In this paper, the prestrain-dependent Payne effect and hysteresis loss of CB-filled rubber vulcanizates are investigated through experimental and theoretical analysis. Based on the experimental results, the classic quantitative models proposed by Kraus, Huber-Vilgis, and Maier-Göritz are used to describe the Payne effect. The results show that the Maier-Göritz model is most suitable to describe the Payne effect, especially for the loss modulus. After calculating the area of the hysteresis loops, hysteresis loss curves at various dynamic strain amplitudes are parallel to each other. Through application of the time-strain superposition principle, the hysteresis loss at any arbitrary prestrain can be predicted. Thus, the aim of this paper is to provide guidance for researchers in choosing an accurate model for future investigations of the prestrain-dependent Payne effect. An accelerated characterization method is useful for the prediction of the hysteresis loss of rubber products using small amounts of experimental data, which can provide manufacturers with more attractive and lower cost opportunities for testing the mechanical properties of rubber products.

Development of an optical sensing system for the detection of lubricity conditions on the rail gage face

ABSTRACT A novel optical sensing device that uses laser-induced fluorescence to detect the lubricity condition of the rail gage-face is evaluated. By analysing the fluorescence properties of eight commonly used gage-face greases used by the U.S. Class I railroads, we observed that the emitted fluorescence of the grease when exposed to ultraviolet (UV) light of different wavelengths can be used for detecting their presence. This observation is used to develop a non-contacting optical sensing device that uses two 405 nm lasers, a fluorescence detector, and a fluorescent bandpass filter, which are optimized for the fluorescence spectra of the greases. Two sensing devices are installed on a robotic rail cart, one on each side, to simultaneously detect the lubricity conditions on the rails over extended distances. After extensive evaluations using both laboratory and field testing, it is confirmed that the optical sensing system can accurately detect the presence of the gage-face grease through the fluorescence intensity or intensity variance, even when there are small quantities of grease in relatively thin layers. Furthermore, the test results indicate a high level of repeatability and efficiency in detecting the spatial distribution of grease along the rail.

Abnormal amyloid precursor protein processing in periodontal tissue in a murine model of periodontitis induced by Porphyromonas gingivalis.

The study aimed to investigate the change of amyloid precursor protein (APP) processing and amyloid β (Aβ) metabolites in linking periodontitis to Alzheimer's disease (AD). Aβ is one of the main pathological features of AD, and few studies have discussed changes in its expression in peripheral tissues or analyzed the relationship between the peripheral imbalance of Aβ production and clearance. A murine model of periodontitis was established by oral infection with Porphyromonas gingivalis (P. gingivalis). Micro-computed tomography (Micro-CT) was used to observe the destruction of the alveolar bone. Nested quantitative polymerase chain reaction (qPCR) was used to measure small quantities of P.gingivalis DNA in different tissues. Behavioral experiments were performed to measure cognitive function in the mice. The mRNA levels of TNF-α, IL-6, IL-8, RANKL, OPG, APP695, APP751, APP770, and BACE1 in the gingival tissues or cortex were detected by RT-PCR. The levels of Aβ1-40 and Aβ1-42 in gingival crevicular fluid (GCF) and plasma were tested by ELISA. P. gingivalis oral infection was found to cause alveolar bone resorption and impaired learning and memory. P.gingivalis DNA was detected in the gingiva, blood and cortex of the P.gingivalis group by nested qPCR (p < .05). The mRNA expression of TNF-α, IL-6, IL-8, RANKL/OPG, and BACE1 in the gingival tissue was significantly higher than that in the control group (p < .05). Similarly, upregulated mRNA levels of APP695 and APP770 were observed in the gingival tissuses and cortex of the P. gingivalis group (p < .05). The levels of Aβ1-40 and Aβ1-42 in the GCF and plasma of the P. gingivalis group were significantly higher than those in the control group (p < .05). P. gingivalis can directly invade the brain via hematogenous infection. The invasion of P. gingivalis could trigger an immune response and lead to an imbalance between Aβ production and clearance in peripheral tissues, which may trigger an abnormal Aβ metabolite in the brain, resulting in the occurrence and development of AD.

Role of Potential Plant Hormones for Activation and Enhancing Physiological Processes, Growth and Development

Plant hormones are chemicals that are present in small amounts, influence and promote the division, growth, and maturation of cells and tissues. Salicylic acid is a phenolic phytohormone and has a function in growth/development, photosynthesis, transpiration, ion absorption, and transport. By interfering with endogenous signals, SA mediates plant defense against pathogens. It strengthens the body's defenses against infections by promoting the production of pathogenesis-related proteins. It affects the systemic acquired resistance (SAR) pathway, wherein a pathogenic assault on one. Water deficiency affects during tillering, head emergence, filling of grain and maturity water deficiency of wheat. Concentration of carotenoids more during drought stress and that produced for drought tolerance enhancement in bread wheat. Water shortage on pigment contents of photosynthesis, relative water amount, shot weight in dried form, flag leaf area specific mass, parameters for gas exchange, physiological parameters and yield. Drought there more significant reduction in tillers/plant, fertile tillers/plant, length of spike, yield/spike and thousand kernel weight of wheat cultivars during drought conditions as compared with normal irrigation conditions. Polyamine exogenously via spray during grain filling condition. The water deficiency spermidine and spermine reduced the inhibition caused by water deficiency when polyamine had applied.

TECHNOLOGY OF ADDITIVE MANUFACTURING: A COMPREHENSIVE REVIEW

The process of additive manufacturing (AM), commonly known as 3D printing, is a method of constructing a component by progressively adding material in layers using digital 3D design information. As part of 'Industry 4.0,' many industrial technologies are rapidly increasing to thrive in the twenty-first century. This study goes over seven different types of additive manufacturing in great detail. These technologies make it possible to make complex, high-value parts quickly and in small quantities without using as much energy or material or making as many tools as subtractive manufacturing does. Besides, AM also possesses some particular challenges, like post-processing, material unavailability, software issues, etc. The application of AM is expanding rapidly from micro to macro-scale sectors. 3D printing technology will change industrial operations in the following years. Eventually, the elected technology will be closely related to the proposed function.

Raw materials for Neolithic ground tools from the extraction fields at Bílý Kámen Hill, Central Bohemia

The assemblage of ground tools and their fragments from the site of Bílý Kámen Hill near the town of Sázava (Czech Republic, Central Bohemia) is one of the largest chronologically uniform collections in Central Europe. Based on the dominant representation of bored axe-hammers, we date it to the late phase of the Stroked Pottery culture (SBK; 5100/5000–4500/4400 cal BC). Their connection to the extraction of local marble and the production of prestigious bracelets raises many questions. The material composition of the assemblage could be the key to understanding the origin of the artefacts. In this article, we examined 912 samples using optical and electron microscopy methods. This points to the dominant representation of amphibole-rich Jizera Mountains-type metabasites. Other rocks are represented only in small quantities and raw materials of local origin are probably missing in the assemblage. It is thus comparable to assemblages from contemporaneous settlement sites, although we do not yet know of stable occupation in the vicinity of the site, nor do we even anticipate its existence.

The Development and Characterisation of ssDNA Aptamers via a Modified Cell-SELEX Methodology for the Detection of Human Red Blood Cells.

Blood is one of the most commonly found biological fluids at crime scenes, with the detection and identification of blood holding a high degree of evidential value. It can provide not only information about the nature of the crime but can also lead to identification via DNA profiling. Presumptive tests for blood are usually sensitive but not specific, so small amounts of the substrate can be detected, but false-positive results are often encountered, which can be misleading. Novel methods for the detection of red blood cells based on aptamer-target interactions may be able to overcome these issues. Aptamers are single-stranded DNA or RNA sequences capable of undergoing selective antigen association due to three-dimensional structure formation. The use of aptamers as a target-specific moiety poses several advantages and has the potential to replace antibodies within immunoassays. Aptamers are cheaper to produce, display no batch-to-batch variation and can allow for a wide range of chemical modifications. They can help limit cross-reactivity, which is a hindrance to current forensic testing methods. Within this study, a modified Systematic Evolution of Ligands by Exponential Enrichment (SELEX) process was used to generate aptamers against whole red blood cells. Obtained aptamer pools were analysed via massively parallel sequencing to identify viable sequences that demonstrate a high affinity for the target. Using bioinformatics platforms, aptamer candidates were identified via their enrichment profiles. Binding characterisation was also conducted on two selected aptamer candidates via fluorescent microscopy and qPCR to visualise and quantify aptamer binding. The potential for these aptamers is broad as they can be utilised within a range of bioassays for not only forensic applications but also other analytical science and medical applications. Potential future work includes the incorporation of developed aptamers into a biosensing platform that can be used at crime scenes for the real-time detection of human blood.

Three-component volume of fluid method coupling with interface compression method and Eulerian–Lagrangian spray atomization surface density model for prediction of cavitating sprays

In this work, a new three phase cavitation model with Eulerian–Lagrangian Spray Atomization (ELSA) and Interface Capturing Method (ICM) coupling is presented to allow for, in a unified approach, physical insight of the surface evolution of cavitating sprays at the Sub-Grid Scale (SGS). Phase change is accounted for in the framework via mass transfer across a liquid and corresponding vapor phase. The surface density model was validated against direct numerical simulation data of an atomizing jet with a systematic variation of mesh resolutions. The sensitivity of the adjustable parameters such as the critical Weber number was also demonstrated. Then, experimental comparisons were made with a more realistic orthogonal spray geometry within a cavitating and turbulent non-cavitating system. These comparisons include both large scale visualizations and small scale SGS quantities such as the Sauter mean diameter. To our knowledge, this is the first study that presents the performance of a three phase cavitating framework with SGS ELSA-ICM coupling.

Solid-state exchange reactions during sintering of dispersed alumina

In this article, the mechanism of sintering of Al2O3 in the presence of small amounts of Na2O and CaO was investigated. Based on the results of the electron microscopy, the granulometry and morphological features of the particles of the studied alumina were established. The uniform nature of the distribution of sodium-containing phases was revealed, in contrast to silicon-containing ones, and the dislocation of submicron particles from calcium-containing phases was determined mainly on the basal planes of relatively large corundum particles. It was shown that such an arrangement of calcium-containing phases promotes the formation of a dense layered microstructure during sintering, especially in the presence of -alumina. The general pattern of the branched mechanism of the reaction phase formation during the sintering of the compositions in the Na2O–СаО–Al2O3 system was illustrated by a diagram explaining the trend of physicochemical processes and the feasibility of using specific types of dispersed alumina for technologies of corundum products and refractory concretes with different contents of aluminous cements.

Dynamic Simulation Platform Aids Deep Transient Tests, Well-Control Safety

_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 215454, “Enhancing Well-Control Safety With Dynamic Well-Control Cloud Solutions: Case Studies of Successful Deep Transient Tests in Southeast Asia,” by M. Ashraf Abu Talib, SPE, M. Shahril Ahmad Kassim, and Izral Izarruddin Marzuki, SPE, Petronas, et al. The paper has not been peer reviewed. _ The complete paper addresses challenges related to well control and highlights the successful implementation of deep transient tests (DTT) in an offshore well performed with the help of a dynamic well-control simulation platform. The paper aims to provide insights into the prejob simulation process, which ensured a safer operation from a well-control perspective. Additionally, a comparison between simulated and actual sensor measurements during the DTT operation is presented. DTT DTT is a formation-testing (FT) method that allows pressure transient tests that reach deeper into the formation compared with conventional interval pressure transient tests (IPTT). DTT enables the testing of formations with higher permeability, greater thickness, and lower viscosity and real-time measurement of crucial parameters. During a DTT, formation fluid is pumped from the reservoir; upon stopping the pump, the formation pressure begins to recover as fluid further from the wellbore replaces the extracted fluid. By analyzing the resulting pressure transient, properties such as formation permeability, permeability anisotropy, and other characteristics can be determined. DTT allows for a better understanding of reservoir characteristics and rock heterogeneity. When properly designed and executed, DTT can reveal potential baffles and boundaries within the radius of investigation. A further advantage of DTT over drillstem tests (DST) is its minimal fluid flow, which allows for the attainment of objectives while contributing to the United Nations sustainable development goals. In DTT operations, the FT tool is connected to the drillpipe through a circulating sub and a slip joint. The circulating sub plays a critical role in DTT operations because it enables the continuous mixing of pumped formation fluid with circulated mud and facilitates its transportation to the surface (Fig. 1). Typically, a constant circulation rate ranging from 100 to 250 gal/min is maintained. During circulation, the annular preventer is closed and the mud/hydrocarbon mixture is directed through the choke line to the mud/gas separator (MGS) once it reaches the surface. No formation fluids are flared during DTT operations. Instead, the circulated oil is retained in the mud and only small amounts of gas are vented. By use of a slip joint, the FT remains anchored to the borehole wall. A high-resolution pressure gauge is used to capture and interpret even minor pressure fluctuations during the pressure transient buildup.

High time resolution diagnosis of electron density in helium plasma jets with impurity gas

Atmospheric pressure helium plasma jets are widely used in biomedical applications. Researchers normally introduce small amounts of nitrogen and oxygen (0.2–1.0%) into helium to enhance the electron density and electron energy, thus increasing the concentration of active species in plasma. To further explore why the combination of impurity gases N2/O2 leads to an increase in the electron density from the discharge mechanism, we used a microwave Rayleigh scattering method with excellent time-varying characteristics to monitor the temporal electron density changes when different concentrations of N2/O2 were mixed. The research revealed that even trace amounts of N2/O2 (0.2%) can increase the peak electron density, with this effect being more pronounced when N2 is added, increasing from 3.3 × 1019 to 4.6 × 1019 m−3 in pure helium. As the concentration increases, the introduction of O2 leads to a rapid decrease in the electron density. When 1.0% oxygen is mixed, the electron density decreases from 3.3 × 1019 to 2.4 × 1019 m−3. However, the situation is different when N2 is added, at 0.5% proportion of nitrogen, the electron density increases to its maximum at 6.5 × 1019 m−3. These effects are due to the electronegativity of the oxygen-containing particles or the Penning ionization related to excited nitrogen species.

Study Investigates Seismic Monitoring for Carbon Storage Leak Detection

_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper IPTC 22980, “Carbon Storage Leak Detection Through Seismic FWI and RTM: Different Survey Analyses,” by Sajjad Amani, Kyoto University. The paper has not been peer reviewed. Copyright 2023 International Petroleum Technology Conference. Reproduced by permission. _ In the complete paper, marine seismic data processing is investigated as a tool for monitoring possible leakages in geological carbon storage. Because of the great importance of storage permanence, a precise leakage-monitoring strategy is crucial. The proficiency of seismic monitoring solutions for leakage monitoring can be affected by shallower layers as a result of structure, seismic wave attenuation, and leak size. The authors explore two popular seismic monitoring methods used in this application in different scenarios: full waveform inversion (FWI) and reverse-time migration (RTM). Introduction Among the various carbon capture and storage (CCS) options, underground storage in saline aquifers is the best-understood solution. To assure storage consistency and permanence, finding the best strategy to precisely detect possible carbon leaks is essential. A perfect method must demonstrate the difference between stored CO2 and injected CO2 to detect potential fast- and slow-leakage areas. The seismic monitoring technique is the most efficient approach in this respect. Two popular tools for seismic monitoring are FWI and RTM. Several studies of their use in this application have been conducted. However, previous research did not analyze different survey arrays for carbon-leak detection using FWI and RTM. The current research aims to investigate quantitative aspects of CCS monitoring to conduct sensitivity analysis of the three different survey arrays [vertical seismic profile (VSP), crosswell, and surface] for different amounts of CO2-storage leakage in a saline aquifer reservoir. The capability of seismic-imaging methods for small amounts of leakage was tested. Comparison of these three arrays using monitoring methods such as RTM and FWI reveals their pros and cons in providing detailed information about the reservoir. In this research, a simple synthetic model was built that closely fits actual reservoirs characterized by suitable physical features such as velocity and density. Subsequently, elastic wave propagation simulation was implemented by use of a finite-difference scheme over a physical model of the reservoir. Then, FWI was applied to enhance the accuracy of the model parameters. With an efficient forward-modeling and inversion scheme, RTM was used as a powerful imaging tool that provides final high-resolution results for monitoring CO2 migration and possible leakage. This process examined the synthetic model for different amounts of CO2 leakage in saline aquifers to evaluate the performance of CO2 leakage monitoring using the seismic method. The results of the different receiver and source arrays also were compared to establish their effectiveness.

“Antimicrobial properties of tissue conditioner modified with chitosan and green-synthesized silver nanoparticles: a promising approach for preventing denture stomatitis”

BackgroundChitosan is known to inhibit the growth of many bacteria and fungi. Tissue conditioners are commonly used to prevent bone destruction under dentures. However, over time, these materials can become a suitable substrate for microbial growth. One approach to improving dental materials is the use of nanoparticles. This study examined the antifungal properties of chitosan and green technique-synthesized silver nanoparticles in combination with tissue conditioners.MethodsTissue conditioner materials were mixed with chitosan and silver nanoparticles at concentrations of 0.097%, 0.19%, and 0.37%, along with 1.25 ppm Nystatin, and their antimicrobial properties against Candida albicans were investigated. The growth rate was measured after 24 h of incubation at 37 °C. Non-parametric tests, such as the Kruskal-Wallis H test and Mann-Whitney U test with Bonferroni correction, were used for data analysis after verifying that the groups did not have a normal distribution.ResultsCompared with the control and Nystatin groups, the Chitosan-silver groups showed a significant decrease in the number of CFUs of Candida albicans.ConclusionsThe combination of chitosan and silver nanoparticles with tissue conditioner materials is a promising alternative for preventing and treating denture stomatitis. These findings suggest that using very small amounts of nanoparticles in dental materials could effectively prevent microbial growth, which could improve the longevity and efficacy of dental prosthetics and materials.

Production of Plant Proteins and Peptides with Pharmacological Potential.

The use of plant proteins or peptides in biotechnology is based on their identification as possessing bioactive potential in plants. This is usually the case for antimicrobial, fungicidal, or insecticidal components of the plant's defense system. They function in addition to a large number of specialized metabolites. Such proteins can be classified according to their sequence, length, and structure, and this has been tried to describe for a few examples here. Even though such proteins or peptides can be induced during plant-pathogen interaction, they are still present in rather small amounts that make the system not suitable for the production in large-scale systems. Therefore, a suitable type of host needs to be identified, such as cell cultures or adult plants. Bioinformatic predictions can also be used to add to the number of bioactive sequences. Some problems that can occur in production by the plant system itself will be discussed, such as choice of promoter for gene expression, posttranslational protein modifications, protein stability, secretion of proteins, or induction by elicitors. Finally, the plant needs to be set up by biotechnological or molecular methods for production, and the product needs to be enriched or purified. In some cases of small peptides, a direct chemical synthesis might be feasible. Altogether, the process needs to be considered marketable.