Natural and man-made slope failure has been a phenomenon that has caused many deaths, destruction, and environmental damage. The use of bioengineering technique (grasses) has been widely approached for slope remediation work. However, slope failure still occurs even though it has been protected by a few grasses. Many previous findings have reported on root pull out and root tensile strength for different plant species. However, the type of soil was not taken into account. Therefore, this research was carried out to investigate the function of root mechanical properties in different types of soil. The dry and wet sieve analysis tests were performed to know the classification of the soil. In addition to that, the soil mineralogy test was also conducted to support the soil classification. Root tensile strength tests were carried out on well-grown and poorly-grown Bermuda grass toward sandy and clay soil in dry and wet conditions. The dry condition is considered the condition of Bermuda grass in hot weather, while the wet condition is the condition after the raining season. Bermuda grass was chosen since this type of grass is widely applied for slope stabilization. The site locations were chosen in Temerloh, Maran which consist of clay soil. The other locations chosen were Karak, Gambang, Kuantan, Dengkil, Batang Kali, Ulu Yam, Kuala Pilah, Gombak and Sabak Bernam consist of sandy soil. The results show that the single root of Bermuda grass has higher tensile strength in sandy soil with range values from 0.47 to 185 Mpa compared to clay soil with range values from 0.12 to 159.10 Mpa. In conclusion, the results indicate that soil is one of the factors that influence the growth of bioengineering techniques for slope reinforcement.