Abstract
Microbially induced carbonate precipitation (MICP) technology is employed to reinforce the surface soil of a dam, aiming to prevent erosion caused by water flow and damage to the dam slope. The relationship between penetration depth, calcium carbonate content, and bonding depth was investigated at eight measuring points on the sand slope surface of a mold under different reinforcement durations. It was observed that as grouting reinforcement times increased, there was a gradual increase in calcium carbonate content but a rapid rise in penetration resistance. Moreover, the bonding depth of sand on the bio-reinforced sand slope increased with higher levels of calcium carbonate content. Microbial grouting reinforcement enhanced soil particle bonding force, requiring water flow to overcome this force for activation of sand particles. Consequently, microbial grouting reinforcement significantly improved shear strength and critical starting flow velocity on sand slope surfaces. The experimental results demonstrated that after MICP surface treatment through spraying, a dense and water-stable hard shell layer composed of bonded calcium carbonate and soil particles formed continuously on sample surfaces, effectively enhancing the strength and erosion resistance of sandy soils. These findings provide reliable evidence for silt slope reinforcement and dam erosion prevention.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
