Size-dependent Changes Research Articles

Allosteric Regulation of 3CL Protease of SARS-CoV-2 and SARS-CoV Observed in the Crystal Structure Ensemble

The 3C-like protease (3CLpro) of SARS-CoV-2 is a potential therapeutic target for COVID-19. Importantly, it has an abundance of structural information solved as a complex with various drug candidate compounds. Collecting these crystal structures (83 Protein Data Bank (PDB) entries) together with those of the highly homologous 3CLpro of SARS-CoV (101 PDB entries), we constructed the crystal structure ensemble of 3CLpro to analyze the dynamic regulation of its catalytic function. The structural dynamics of the 3CLpro dimer observed in the ensemble were characterized by the motions of four separate loops (the C-loop, E-loop, H-loop, and Linker) and the C-terminal domain III on the rigid core of the chymotrypsin fold. Among the four moving loops, the C-loop (also known as the oxyanion binding loop) causes the order (active)–disorder (collapsed) transition, which is regulated cooperatively by five hydrogen bonds made with the surrounding residues. The C-loop, E-loop, and Linker constitute the major ligand binding sites, which consist of a limited variety of binding residues including the substrate binding subsites. Ligand binding causes a ligand size dependent conformational change to the E-loop and Linker, which further stabilize the C-loop via the hydrogen bond between the C-loop and E-loop. The T285A mutation from SARS-CoV 3CLpro to SARS-CoV-2 3CLpro significantly closes the interface of the domain III dimer and allosterically stabilizes the active conformation of the C-loop via hydrogen bonds with Ser1 and Gly2; thus, SARS-CoV-2 3CLpro seems to have increased activity relative to that of SARS-CoV 3CLpro.

The evolution of size-dependent competitive interactions promotes species coexistence.

Theory indicates that competing species coexist in a community when intraspecific competition is stronger than interspecific competition. When body size determines the outcome of competitive interactions between individuals, coexistence depends also on how resource use and the ability to compete for these resources change with body size. Testing coexistence theory in size-structured communities, therefore, requires disentangling the effects of size-dependent competitive abilities and niche shifts. Here, we tested the hypothesis that the evolution of species- and size-dependent competitive asymmetries increased the likelihood of coexistence between interacting species. We experimentally estimated the effects of size-dependent competitive interactions on somatic growth rates of two interacting fish species, Trinidadian guppies Poecilia reticulata and killifish Rivulus hartii. We controlled for the effects of size-dependent changes in the niche at two competitive settings representing the early (allopatric) and late (sympatric) evolutionary stages of a killifish-guppy community. We fitted the growth data to a model that incorporates species- and size-dependent competitive asymmetries to test whether changes in the competitive interactions across sizes increased the likelihood of species coexistence from allopatry to sympatry. We found that guppies are competitively superior to killifish but were less so in sympatric populations. The decrease in the effects of interspecific competition on the fitness of killifish and increase in the interspecific effect on guppies' fitness increased the likelihood that sympatric guppies and killifish will coexist. However, while the competitive asymmetries between the species changed consistently between allopatry and sympatry between drainages, the magnitude of the size-dependent competitive asymmetries varied between drainages. These results demonstrate the importance of integrating evolution and trait-based interactions into the research on how species coexist.

Tropical tree allometry and crown allocation, and their relationship with species traits in central Africa

Common allometric patterns have been reported across the tropics and good performance on independent data was retrieved for the most recent pantropical model predicting tree aboveground biomass (AGB) from stem diameter, wood density and total height. General models are undoubtedly useful for the estimation and monitoring of biomass and carbon stocks in tropical forests, however specific allometry, allocation, and traits, are at the core of many models of vegetation dynamics, and there is lack of such information for some regions and species. In this study, we specifically evaluated how size-dependent changes in above-ground biomass and biomass allocation to crown relate to other allometric and life-history traits for tropical tree species. We gathered destructive data available in eight terra firme forest sites across central Africa and the combined dataset consisted of 1,023 trees belonging to 54 tropical tree species phylogenetically dispersed, with only two congeneric species. A huge body of field and laboratory measurements was used for computing AGB and crown mass ratio (CMR) at the tree level, and to derive key allometric traits at the species level. For the latter, species-specific relationships between tree diameter and total height, crown exposure to light, wood density, and bark thickness were fitted for 50 species. Our results show interspecific variation in the relationships relating tree diameter to both AGB and CMR, and including species traits in a multi-specific AGB model confirmed that interspecific variation in biomass allometry is primarily determined by species wood density. We also showed that the allocation of biomass to crown increases linearly with tree diameter for most species, and that interspecific variation in the CMR model is associated with the species dispersal mode and maximum height. Trait covariations among our set of tropical tree species widespread and/or locally abundant in central Africa, revealed a continuum between large-statured species, which tended to be light-demanding, deciduous and wind-dispersed, and species with opposite attributes. Information on allometry, allocation, and traits provided here could further be used in comparative ecology and for parameterizing dynamic and succession models. Also importantly, the species-specific AGB models fitted for major tree species, including most timber species of central Africa, will help improve biomass estimates.

Alloy formation and composition partitioning of plasmonic-magnetic Au−Fe nanoparticles embedded in sol-gel SiO2 films

A gradual compositional evolution has been observed in bimetallic Au−Fe nanoparticles (nps) incorporated in SiO2 films fabricated on glass substrate by the sol-gel technique. UV–vis spectra of these nps embedded films showed a red-shifting of the Au surface plasmon resonance (Au-SPR) band after heat-treatment in reducing gas (H2−Ar) atmosphere. GIXRD and TEM studies revealed the formation of Au−Fe alloy nps (average Fe content ~21.4 at%) after reduction at 800 °C in H2−Ar. At this stage a major fraction of added Fe remains in the amorphous film as −Si−O−Fe− network. Further reduction at 900 °C results in crystallization of silica film into cristobalite with expulsion of Fe from the network. The released metallic Fe got dissolved in the existing alloy nps, and formed Au−Fe alloy with relatively higher average Fe-content (~36 at%). A detailed TEM study of the film reduced at 900 °C using nano-probe electron beam STEM−EDS technique revealed size dependent compositional change in individual alloy nps. Existence of multiple sets of fcc, and bcc peaks in GIXRD, and XPS analysis confirmed such compositional changes in the nps. The 900 °C-annealed film showed room temperature soft magnetic behavior with modified plasmonic feature confirming the existence of plasmonic-magnetic dual properties.

Zinc Ferrite Nanoparticles: Unusual Growth Mechanism for Size‐Dependent Properties

AbstractHerein, non‐stoichiometric zinc ferrite nanoparticles, Zn0.86Fe2.14O4+δ,with grain sizes of being smaller than 11 nm were successfully prepared by varying the hydrothermal reaction duration and temperature. The influence of reaction temperature and time on the grain size of zinc ferrite nanoparticles was investigated. Non‐stoichiometric zinc ferrite nanoparticles underwent distinct processes at different reaction temperatures: at 200 °C, the growth mechanism follows an Ostwald ripening model with activation energy 124.7 kJ/mol, while at 120 °C, the particle growth is governed by aggregation and coalescence, Ostwald ripening mechanism with the activation energy 27.5 kJ/mol and digestive ripening process.The abnormal growth behavior of zinc ferrite nanoparticles is completely different from previous reports on the oxides. Detailed analysis of XPS, XRD, FT‐IR and Mössbauer spectra revealed that the presence of rich iron oxides on the surface of nanoparticles is responsible to the non‐stoichiometry. Moreover, unit cell volume and magnetic property of non‐stoichiometric zinc ferrite exhibited two extremum as the increase of grain size, which was closely related to the grain size‐dependent structure changing. The unusual growth behavior and the size dependent structure and property changes of non‐stoichiometric zinc ferrite nanoparticles reported in this work may be beneficial to guide the future development of magnetic materials.

Scanning electron microscopy and morphological analysis reveal size-dependent changes in the scale surface ornamentation of tooth-carp Aphaniops hormuzensis (Teleostei; Aphaniidae).

Aphanius hormuzensis is an endemic tooth-carp found in the Hormuzgan drainage in S-Iran. This study aimed to investigate the size-dependent alternations of scale surface ornamentation in this species by conducting scanning electron microscopy and morphological analysis. A total of 50 wild fish individuals were captured from Shur River, and were classified into five size classes based on the standard length; SC-I (SL=10-20 mm), SC-II (SL=21-30 mm), SC-III (SL=41-50 mm), SC-IV (SL=51-60 mm), and SC-V (SL=61-70 mm), and their scales were removed from below the dorsal fin (key scale) and caudal peduncle regions. The results revealed a clear trend of scale structural development in A. hormuzensis. The scale of small-sized (TL < 30 mm) and large-sized fishes (TL > 30 mm) differed, respectively, in the following characters; the overall shape (often circular vs. polygonal), relative focus size (large, FL/SL=440-610 μm vs. intermediate and small, FL/SL=100-330 μm), types of radii (only primary vs. three types), relative radii length (short, RL/SL=100-180 μm vs. long, RL/SL=320-450 μm), lepidont (absent or undeveloped vs. present and developed), and the relative lepidont length (short, LL/SL=0.83-0.90 μm vs. intermediate and long, LL/SL=1.2-2.2μm). These character alternations could explain certain developmental stages in this species. The size-dependent changes in the surface micro-ornamentations as shown in this study suggest that these characters should be used cautiously for taxonomic studies of the aphaniid fishes.

The leaf economics spectrum's morning coffee: plant size-dependent changes in leaf traits and reproductive onset in a perennial tree crop.

Size-dependent changes in plant traits are an important source of intraspecific trait variation. However, there are few studies that have tested if leaf trait co-variation and/or trade-offs follow a within-genotype leaf economics spectrum (LES) related to plant size and reproductive onset. To our knowledge, there are no studies on any plant species that have tested whether or not the shape of a within-genotype LES that describes how traits covary across whole plant sizes, is the same as the shape of a within-genotype LES that represents environmentally driven trait plasticity. We quantified size-dependent variation in eight leaf traits in a single coffee genotype (Coffea arabica var. Caturra) in managed agroecosystems with different environmental conditions (light and fertilization treatments), and evaluated these patterns with respect to reproductive onset. We also evaluated if trait covariation along a within-genotype plant-size LES differed from a within-genotype environmental LES defined with trait data from coffee growing in different environmental conditions. Leaf economics traits related to resource acquisition - maximum photosynthetic rates (A) and mass-based leaf nitrogen (N) concentrations - declined linearly with plant size. Structural traits - leaf mass, leaf thickness, and leaf mass per unit area (LMA) - and leaf area increased with plant size beyond reproductive onset, then declined in larger plants. Three primary LES traits (mass-based A, leaf N and LMA) covaried across a within-genotype plant-size LES, with plants moving towards the 'resource-conserving' end of the LES as they grow larger; in coffee these patterns were nearly identical to a within-genotype environmental LES. Our results demonstrate that a plant-size LES exists within a single genotype. Our findings indicate that in managed agroecosystems where resource availability is high the role of reproductive onset in driving within-genotype trait variability, and the strength of covariation and trade-offs among LES traits, are less pronounced compared with plants in natural systems. The consistency in trait covariation in coffee along both plant-size and environmental LES axes indicates strong constraints on leaf form and function that exist within plant genotypes.

Size-dependent dendritic maladaptations of hypoglossal motor neurons in SOD1G93A mice.

The total motor neuron (MN) somato-dendritic surface area is correlated with motor unit type. MNs with smaller surface areas innervate slow (S) and fast fatigue-resistant (FR) motor units, while MNs with larger surface areas innervate fast fatigue-intermediate (FInt) and fast fatigable (FF) motor units. Differences in MN surface area (equivalent to membrane capacitance) underpin the intrinsic excitability of MNs and are consistent with the orderly recruitment of motor units (S > FR > FInt > FF) via the Size Principle. In amyotrophic lateral sclerosis (ALS), large MNs controlling FInt and FF motor units exhibit earlier denervation and death, compared to smaller and more resilient MNs of type S and FR motor units that are spared until late in ALS. Abnormal dendritic morphologies in MNs precede neuronal death in human ALS and in rodent models. We employed Golgi-Cox methods to investigate somal size-dependent changes in the dendritic morphology of hypoglossal MNs in wildtype and SOD1G93A mice (a model of ALS), at postnatal (P) day ~30 (pre-symptomatic), ~P60 (onset), and ~P120 (mid-disease) stages. In wildtype hypoglossal MNs, increased MN somal size correlated with increased dendritic length and spines in a linear fashion. By contrast, in SOD1G93A mice, significant deviations from this linear correlation were restricted to the larger vulnerable MNs at pre-symptomatic (maladaptive) and mid-disease (degenerative) stages. These findings are consistent with excitability changes observed in ALS patients and in rodent models. Our results suggest that intrinsic or synaptic increases in MN excitability are likely to contribute to ALS pathogenesis, not compensate for it.

Changes of nest mass in relation to nesting stages in the Great Tit Parus major

ABSTRACT Capsule Nest mass of the Great Tit Parus major increases over the course of the nesting cycle and the magnitude of the increase between incubation and post-fledging stage is positively correlated with brood size. Aims To investigate whether, in the Great Tit, fresh nest mass changes over the course of the nesting cycle, is correlated with dry nest mass assessed after the nestlings have fledged, and whether temporal variation in fresh nest mass is associated with clutch or brood size. Methods Fresh nest mass was measured at the beginning of egg laying, the beginning of incubation and shortly after the nestlings fledged. Dry nest mass was measured after subjecting nests collected at the end of the nesting cycle to a drying procedure. Results Between the onset of egg laying and early incubation nest mass increased by 14.1%, and between early incubation and post-fledging stage by 69.7%. The magnitude of the increase over the late nesting stage correlated positively with the number of 14 day-old nestlings. Nest dry mass and post-fledging fresh nest mass, but not mass at the early stages of the nesting cycle (egg laying and incubation), were positively correlated with clutch and brood sizes. There was no variation among the nests in the pattern of mass change between the egg laying and incubation stages, while this pattern varied widely between the incubation and post-fledging stages. Conclusions While nests are most commonly weighed after the nestlings have fledged, we suggest that in order to obtain the most reliable estimate of investment in nest building, nests should be weighed during the early stages of the nesting cycle, preferably at the onset of incubation, to avoid brood size-dependent changes in their masses.

Structure-optical property correlation in CdTe/CdS core-shell quantum dots and their effects on Cu2+ sensing mechanisms

A rapid and simple aqueous method has been developed for synthesizing CdTe/CdS core shell quantum dots (QDs) by refluxing glutathione (GSH) with Cd2+ and Te2− precursors at 100 °C without using inert medium. Here GSH has dual role, i.e., as an in-situ source of sulphide for deposition of CdS on CdTe and as a capping agent to stabilize the CdTe/CdS QDs. As the refluxing time was enhanced from 15 min to 105 min, the sizes of the spherical shaped CdTe/CdS QDs increased from 2.8 ± 0.8 nm to 3.9 ± 1.1 nm, the crystalline nature improved, GSH capping content decreased and the CdS shell deposition was increased. The size dependent change in photoluminescence (PL) from green to red was observed. The photoluminescence quantum yield (PLQY) was improved with refluxing time and maximum PLQY was obtained for the batch synthesized by 60 min refluxing. The PL of these QDs were drastically quenched by ppb levels of Cu2+ ions. Instead of the batch with maximum PLQY, the best Cu2+ sensitivity and selectivity was obtained for the batch synthesized by refluxing for 30 min. This is due to optimal GSH capping content required for availability of Cu2+ ions at the surface of the QDs for favorable electron transfer process, confirmed by PL decay kinetic studies.

Bottleneck Size-Dependent Changes in the Genetic Diversity and Specific Growth Rate of a Rotavirus A Strain.

RNA viruses form a dynamic distribution of mutant swarms (termed "quasispecies") due to the accumulation of mutations in the viral genome. The genetic diversity of a viral population is affected by several factors, including a bottleneck effect. Human-to-human transmission exemplifies a bottleneck effect, in that only part of a viral population can reach the next susceptible hosts. In the present study, two lineages of the rhesus rotavirus (RRV) strain of rotavirus A were serially passaged five times at a multiplicity of infection (MOI) of 0.1 or 0.001, and three phenotypes (infectious titer, cell binding ability, and specific growth rate) were used to evaluate the impact of a bottleneck effect on the RRV population. The specific growth rate values of lineages passaged under the stronger bottleneck (MOI of 0.001) were higher after five passages. The nucleotide diversity also increased, which indicated that the mutant swarms of the lineages under the stronger bottleneck effect were expanded through the serial passages. The random distribution of synonymous and nonsynonymous substitutions on rotavirus genome segments indicated that almost all mutations were selectively neutral. Simple simulations revealed that the presence of minor mutants could influence the specific growth rate of a population in a mutant frequency-dependent manner. These results indicate a stronger bottleneck effect can create more sequence spaces for minor sequences.IMPORTANCE In this study, we investigated a bottleneck effect on an RRV population that may drastically affect the viral population structure. RRV populations were serially passaged under two levels of a bottleneck effect, which exemplified human-to-human transmission. As a result, the genetic diversity and specific growth rate of RRV populations increased under the stronger bottleneck effect, which implied that a bottleneck created a new space in a population for minor mutants originally existing in a hidden layer, which includes minor mutations that cannot be distinguished from a sequencing error. The results of this study suggest that the genetic drift caused by a bottleneck in human-to-human transmission explains the random appearance of new genetic lineages causing viral outbreaks, which can be expected according to molecular epidemiology using next-generation sequencing in which the viral genetic diversity within a viral population is investigated.

Optical Properties of Amorphous and Crystalline GeTe Nanoparticle Thin Films: A Phase-Change Material for Tunable Photonics

Phase-change materials (PCMs), which are well-established in optical and random-access memories, are increasingly studied for emerging topics such as brain-inspired computing and active photonics. These applications take advantage of the pronounced reflectivity and resistivity changes that accompany the structural transition in PCMs from their amorphous to crystalline state. However, PCMs are typically fabricated as thin films via sputtering, which is costly, requires advanced equipment, and limits the sample and device design. Here, we investigate a simpler and more flexi-ble approach for applications in tunable photonics: the use of sub-10 nm colloidal PCM nanoparticles (NPs). We report the optical properties of amorphous and crystalline germanium telluride (GeTe) NP thin films from the infrared to the ultraviolet spectral range. Using spectroscopic ellipsometry with support from cross-sectional scanning electron microscopy, atomic force microscopy, and absorption spectroscopy, we extract refractive indices n, extinction coefficients k, and band gaps Eg and compare to values known for sputtered GeTe thin films. We find a decrease of n and k and an increase of Eg for NP-based GeTe films, yielding insights into size-dependent property changes for nanoscale PCMs. Furthermore, our results reveal the suitability of GeTe NPs for tunable photonics in the near-infrared and visible spectral range. Finally, we studied sample reproducibility and aging of our NP films. We found that the colloidally-prepared PCM thin films were stable for at least two months stored under nitrogen, further supporting the great promise of these materials in applications.

Wall Effects on Hydrodynamic Drag and the Corresponding Accuracy of Charge Measurement in Droplet Contact Charge Electrophoresis.

Droplet size dependent wall effects on hydrodynamic drag and the corresponding droplet contact charge estimations were experimentally and theoretically investigated. The consistent reduction in the dimensionless droplet contact charges proportional to droplet size was reported and explained by the parallel and approaching wall effects on the drag coefficient. Extrapolation of the size dependent droplet charge data showed that the droplet charge follows the perfect conductor theory when the droplet radius approaches zero. The proposed model was applied to the drag calculation to estimate and compare dimensionless charges before and after consideration of the wall effects. The droplet free fall test concluded that the droplets in the current experimental setup follow Stokes' law. The theoretical velocity profile of the droplet approaching the wall perpendicularly is proposed considering the approaching wall effect on hydrodynamic drag and verified by comparison with the experiment. The droplet size dependent velocity profile shape change was also explained by this approaching wall effect. The shape of the asymmetric velocity profile along the direction of droplet movement was explained by the effect of the image charge through direct numerical calculation of the electric force. The direct calculation of the electric force also showed that the electric correction at the center of the cuvette is negligible; thus, it is sufficient to consider only hydrodynamic correction for accurate charge measurement in this experimental system. The present study will contribute to the accurate measurement of the droplet charges under contact charge electrophoresis. It also provides the basis for precise control of droplet movement in lab-on-a-chip devices.

Mapping the Topology of PbS Nanocrystals through Displacement Isotherms of Surface-Bound Metal Oleate Complexes

PbS nanocrystals are predicted to undergo size-dependent changes in shape, transitioning from octahedral to cuboctahedral morphology as the nanocrystal size increases. Experimental evidence for siz...

Size-dependent changes in habitat use of Japanese eel Anguilla japonica during the river life stage

Japanese eel (Anguilla japonica) is a commercially important species; however, its population has declined in recent years. Appropriate conservation management, including habitat protection, is required to reverse this decline. However, their habitat use pattern during the riverine life stage is poorly understood. In this study, we investigated the longitudinal distribution and microhabitat of small-sized (<200 mm total length) and large-sized (≥200 mm total length) Japanese eels observed in 83 and 124 quadrats (1 m × 1 m), respectively, placed at seven stations in the Nikkeshi River in Fukushima Prefecture, Japan. Analysis using generalized linear models revealed that the eel density of both size classes decreased with increasing distance from the river mouth. In addition, the density of small-sized eels, but not large-sized ones, decreased as weir numbers increased. Moreover, analysis using generalized additive models showed that microhabitat uses differed between the size classes. The small-sized eels used near-shore habitats which had low current velocities. Their preferred habitats contained both complex substrates with smaller particle sizes and simple substrates with relatively large particle sizes. In contrast, the large-sized eels used both near-shore habitats with lower current velocities and the center of the river which had high current velocities. They preferred simple riverbed habitats with large particle-sized substrates and no underwater vegetation. These results suggest that there is a size-dependent change in the longitudinal distribution and microhabitat use of Japanese eels during their river life stage. These findings provide valuable information for the conservation and management of Japanese eels in rivers.

Pyrocatalytic oxidation - strong size-dependent poling effect on catalytic activity of pyroelectric BaTiO3 nano- and microparticles.

Pyrocatalysis is an emerging advanced oxidation process for wastewater remediation with the potential for thermal energy harvesting and utilization. Although several studies explored the potential of new pyrocatalyst materials to degrade harmful organic water pollutants, the role of important material properties and electric poling procedures on the pyrocatalytic activity is still unclear. In this work, we investigate the interdependence between particle size, electric poling and pyrocatalytic activity of BaTiO3 powders with nominal particle sizes of 100, 200 and 500 nm by using the dichlorofluorescein redox assay. Depending on the particle size, the influence of surface area or phase composition on the pyrocatalytic activity predominates. Moreover, we demonstrate that poling of pyrocatalysts leads to a strong size-dependent increase of pyrocatalytic activity. This poling effect increases with particle size up to +247% and can be explained with size-dependent changes in phase composition and domain structure. Combining all results, the progression of the pyrocatalytic activity as a function of particle size was derived and a future strategy for maximizing the catalytic performance of pyrocatalysts was developed. This study greatly improves the understanding about the role of important material properties and electric poling on pyrocatalytic activity, thus enabling an effective catalyst design. With the help of highly active catalysts, the pyrocatalytic process can take the next step in its development into a new and energy-efficient advanced oxidation process for water remediation.

Structural deformation and host-guest properties of doubly-reduced cycloparaphenylenes, [n]CPPs2- (n = 6, 8, 10, and 12).

Chemical reduction of several cycloparaphenylenes (CPPs) ranging in size from [8]CPP to [12]CPP has been investigated with potassium metal in THF. The X-ray diffraction characterization of the resulting doubly-reduced [n]CPPs provided a unique series of carbon nanohoops with increasing dimensions and core flexibility for the first comprehensive structural analysis. The consequences of electron acquisition by a [n]CPP core have been analyzed in comparison with the neutral parents. The addition of two electrons to the cyclic carbon framework of [n]CPPs leads to the characteristic elliptic core distortion and facilitates the internal encapsulation of sizable cationic guests. Molecular and solid-state structure changes, alkali metal binding and unique size-dependent host abilities of the [n]CPP2− series with n = 6–12 are discussed. This in-depth analysis opens new perspectives in supramolecular chemistry of [n]CPPs and promotes their applications in size-selective guest encapsulation and chemical separation.

Tin oxide subnanoparticles: a precisely-controlled synthesis, subnano-detection for their detailed characterisation and applications.

Subnanometric metal particles exhibit anomalous chemical activity, suggesting innovative applications as next-generation materials. However, a precise synthesis and detailed characterisation of these subnano-materials remain a major challenge. Here we summarise recent works on the synthesis of size-controlled tin (Sn) oxide subnanoparticles (SNPs) using the dendrimer template method, and on their detailed characterisation. Size-controlled Sn oxide SNPs (Sn12, Sn28 and Sn60) have been synthesised and they showed a size-dependent compositional change containing not only stable Sn(iv) states but also metastable Sn(ii) states so as to form subnano-scaled particle shapes. Detailed vibrational characterisation of SNPs was achieved by employing subnano-sensitive Raman spectroscopy for spectroscopic characterisation. Combined with density functional theory studies, the inherent subnano-structures of Sn oxide SNPs have been elucidated for the first time. Furthermore, the size-dependent activity of Sn oxide SNPs upon CO oxidation was rationally explained from the simulated structure of Sn oxide SNPs. A detailed understanding of the chemical and physical nature of subnano-materials facilitates the rational design of SNPs for practical applications such as catalysis, biosensors, and electronics.

Size-Dependent Structural Properties of a High-Nb TiAl Alloy Powder.

TiAl-based alloys are promising light weight structural materials for high temperature applications in the field of aerospace. Recently, fabrication technologies starting from powders including powder metallurgy and additive manufacturing have been developed to overcome the difficulties in the processing, machining and shaping of TiAl-based alloys. Spherical alloy powders with different particle size distributions are usually used in these fabrication techniques. The purpose of this study is to reveal the size-dependent structural properties of a high-Nb TiAl powder for these fabrication technologies starting from powders. A high-Nb TiAl pre-alloyed powder with nominal composition of Ti-48Al-2Cr-8Nb (at. %) was prepared by the electrode induction melting gas atomization (EIGA) method. The phase structure and morphology of the as-atomized powders were characterized by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The size-dependent structural changes of the as-atomized powders with different sizes were studied by differential scanning calorimetry (DSC) and in situ high temperature XRD. It was found that with decreasing the powder size, the content of the γ-TiAl phase decreases and the α2-Ti3Al phase increases. The α2-Ti3Al to γ-TiAl phase transformation was found in the temperature range of 600–770 °C. Based on the present work, the structural characteristics of TiAl powders are strongly dependent on their particle size, which should be considered in optimizing the process parameters of TiAl alloys fabricated from powders.

Why Do Phytoplankton Evolve Large Size in Response to Grazing?

Phytoplankton are among the smallest primary producers on Earth, yet they display a wide range of cell sizes. Typically, small phytoplankton species are stronger nutrient competitors than large phytoplankton species, but they are also more easily grazed. In contrast, evolution of large phytoplankton is often explained as a physical defense against grazing. Conceptually, this explanation is problematic, however, because zooplankton can coevolve larger size to counter this size-dependent escape from grazing. Here, we hypothesize that there is another advantage for the evolution of large phytoplankton size not so readily overcome: larger phytoplankton often provide lower nutritional quality for zooplankton. We investigate this hypothesis by analyzing an eco-evolutionary model that combines the ecological stoichiometry of phytoplankton-zooplankton interactions with coevolution of phytoplankton and zooplankton size. In our model, evolution of cell size modifies the nutrient uptake kinetics of phytoplankton according to known allometric relationships, which in turn affect the nutritional quality of phytoplankton. With this size-based mechanism, the model predicts that low grazing pressure or nonselective grazing by zooplankton favors evolution of small phytoplankton cells of high nutritional quality. In contrast, selective grazing for nutritious food favors evolution of large phytoplankton of low nutritional quality, which are preyed on by medium- to large-sized zooplankton. This size-dependent change in food quality may explain the commonly observed shift from dominance by small picophytoplankton in oligotrophic waters with low grazing pressure to large phytoplankton species in nutrient-rich waters with high grazing pressure.