Single-molecule Magnet Properties Research Articles

AtomAccess: A Predictive Tool for Molecular Design and Its Application to the Targeted Synthesis of Dysprosium Single-Molecule Magnets.

Isolated dysprosocenium cations, [Dy(CpR)2]+ (CpR = substituted cyclopentadienyl), have recently been shown to exhibit superior single-molecule magnet (SMM) properties over closely related complexes with equatorially bound ligands. However, gauging the crossover point at which the CpR substituents are large enough to prevent equatorial ligand binding, but small enough to approach the metal closely and generate strong crystal field splitting has required laborious synthetic optimization. We therefore created the computer program AtomAccess to predict the accessibility of a metal binding site and its ability to accommodate additional ligands. Here, we apply AtomAccess to identify the crossover point for equatorial coordination in [Dy(CpR)2]+ cations in silico and hence predict a cation that is at the cusp of stability without equatorial interactions, viz., [Dy(Cpttt)(Cp*)]+ (Cpttt = C5H2tBu3-1,2,4, Cp* = C5Me5). Upon synthesizing this cation, we found that it crystallizes as either a contact ion-pair, [Dy(Cpttt)(Cp*){Al[OC(CF3)3]4-κ-F}], or separated ion-pair polymorph, [Dy(Cpttt)(Cp*)][Al{OC(CF3)3}4]·C6H6. Upon characterizing these complexes, together with their precursors, yttrium and yttrium-doped analogues, we find that the contact ion-pair shows inferior SMM properties to the separated ion-pair, as expected, due to faster Raman and quantum tunneling of magnetization relaxation processes, while the Orbach region is relatively unaffected. The experimental verification of the predicted crossover point for equatorial coordination in this work tests the limitations of the use of AtomAccess as a predictive tool and also indicates that the application of this type of program shows considerable potential to boost efficiency in exploratory synthetic chemistry.

A Cationic Metal Glue Strategy for Expanding Paramagnetic Hetero-Multinuclear Metal-Oxo Clusters within Polyoxometalate Ligands.

Precise structural design of large hetero-multinuclear metal-oxo clusters is crucial for controlling their large spin ground states and multielectron redox properties for application as a single-molecule magnet (SMM), molecular magnetic refrigeration, and efficient redox catalyst. However, it is difficult to synthesize large hetero-multinuclear metal oxo clusters as designed because the final structures are unpredictable when employing conventional one-step condensation reaction of metal cations and ligands. Herein, we report a "cationic metal glue strategy" for increasing the size and nuclearity of hetero-multinuclear metal-oxo clusters by using lacunary-type anionic molecular metal oxides (polyoxometalates, POMs) as rigid multidentate ligands. The employed method enabled the synthesis of {(FeMn4 )Mn2 Ln2 (FeMn4 )} oxo clusters (Ln=Gd, Tb, Dy, and Lu), which are the largest among previously reported paramagnetic hetero-multinuclear metal-oxo clusters in POMs and showed unique SMM properties. These clusters were synthesized by conjugating {FeMn4 } oxo clusters with Mn and Ln cations as glues in a predictable way, indicating that the "cationic metal glue strategy" would be a powerful tool to construct desired large hetero-multinuclear metal clusters precisely and effectively.

A Cationic Metal Glue Strategy for Expanding Paramagnetic Hetero‐Multinuclear Metal‐Oxo Clusters within Polyoxometalate Ligands

AbstractPrecise structural design of large hetero‐multinuclear metal‐oxo clusters is crucial for controlling their large spin ground states and multielectron redox properties for application as a single‐molecule magnet (SMM), molecular magnetic refrigeration, and efficient redox catalyst. However, it is difficult to synthesize large hetero‐multinuclear metal oxo clusters as designed because the final structures are unpredictable when employing conventional one‐step condensation reaction of metal cations and ligands. Herein, we report a “cationic metal glue strategy” for increasing the size and nuclearity of hetero‐multinuclear metal‐oxo clusters by using lacunary‐type anionic molecular metal oxides (polyoxometalates, POMs) as rigid multidentate ligands. The employed method enabled the synthesis of {(FeMn4)Mn2Ln2(FeMn4)} oxo clusters (Ln=Gd, Tb, Dy, and Lu), which are the largest among previously reported paramagnetic hetero‐multinuclear metal‐oxo clusters in POMs and showed unique SMM properties. These clusters were synthesized by conjugating {FeMn4} oxo clusters with Mn and Ln cations as glues in a predictable way, indicating that the “cationic metal glue strategy” would be a powerful tool to construct desired large hetero‐multinuclear metal clusters precisely and effectively.

Lanthanide-Based Metal–Organic Frameworks with Single-Molecule Magnet Properties

Lanthanide metal–organic frameworks (Ln-MOFs) showing single-molecule magnet (SMM) properties are an ever-growing family of materials where the magnetic properties can be tuned by various interrelated parameters, such as the coordinated solvent, temperature, organic linkers, lanthanide ions and their coordination environment. An overview of the general synthetic methodologies to access MOFs/Ln-MOFs and the peculiarities and parameters to control and/or fine-tune their SMM behavior is herein presented. Additionally, diverse challenging strategies for inducing SMM/SIM behavior in an Ln-MOF are discussed, involving redox activity and chirality. Furthermore, intriguing physical phenomena such as the CISS effect and CPL are also highlighted.

Structural and Magnetization Dynamics of Borohydride-Bridged Rare-Earth Metallocenium Cations.

The structure and magnetic properties of the bimetallic borohydride-bridged dysprosocenium compound [{(η5-Cpttt)(η5-CpMe4t)Dy}2(μ:κ2:κ2-BH4)]+[B(C6F5)4]- ([3Dy][B(C6F5)4]) are reported along with the solution-phase dynamics of the isostructural yttrium and lutetium analogues (Cpttt is 1,2,4-tri(tert-butyl)cyclopentadienyl, CpMe4t is tetramethyl(tert-butyl)cyclopentadienyl). The synthesis of [3M][B(C6F5)4] was accomplished in the 2:1 stoichiometric reactions of [(η5-Cpttt)(η5-CpMe4t)Dy(BH4)] (2M) with [CPh3][B(C6F5)4], with the metallocenes 2M obtained from reactions of the half-sandwich complexes [(η5-Cpttt)M(BH4)2(THF)] (1M) (M = Y, Dy, Lu) with NaCpMe4t. Crystallographic studies show significant lengthening of the M···B distance on moving through the series 1M, 2M, and 3M, with essentially linear {M···B···M} bridges in 3M. Multinuclear NMR spectroscopy indicates restricted rotation of the Cpttt ligands in 3Y and 3Lu in solution. The single-molecule magnet (SMM) properties of [3M][B(C6F5)4] are characterized by Raman and Orbach processes, with an effective barrier of 533(18) cm-1 and relaxation via the second-excited Kramers doublet. Although quantum tunneling of the magnetization (QTM) was not observed for [3M][B(C6F5)4], it was, surprisingly, found in its magnetically dilute version, which has a very similar barrier of Ueff = 499(21) cm-1. Consistent with this observation, slightly wider openings of the magnetic hysteresis loop at 2 K are found for [3M][B(C6F5)4] but not for the diluted analogue. The dynamic magnetic properties of the dysprosium SMMs and the role of exchange interactions in 3Dy are interpreted with the aid of multireference ab initio calculations.

Tailored Lewis Acid Sites for High-Temperature Supported Single-Molecule Magnetism.

Generating or even retaining slow magnetic relaxation in surface immobilized single-molecule magnets (SMMs) from promising molecular precursors remains a great challenge. Illustrative examples are organolanthanide compounds that show promising SMM properties in molecular systems, though surface immobilization generally diminishes their magnetic performance. Here, we show how tailored Lewis acidic Al(III) sites on a silica surface enable generation of a material with SMM characteristics via chemisorption of (Cpttt)2DyCl ((Cpttt)- = 1,2,4-tri(tert-butyl)-cyclopentadienide). Detailed studies of this system and its diamagnetic Y analogue indicate that the interaction of the metal chloride with surface Al sites results in a change of the coordination sphere around the metal center inducing for the dysprosium-containing material slow magnetic relaxation up to 51 K with hysteresis up to 8 K and an effective energy barrier (Ueff) of 449 cm-1, the highest reported thus far for a supported SMM.

Step-by-Step Electrocrystallization Processes to Make Multiblock Magnetic Molecular Heterostructures.

Assembling conductive or magnetic heterostructures by bulk inorganic materials is important for making functional electronic or spintronic devices, such as semiconductive p-doped and n-doped silicon for P-N junction diodes, alternating ferromagnetic and nonmagnetic conductive layers used in giant magnetoresistance (GMR). Nonetheless, there have been few demonstrations of conductive or magnetic heterostructures made by discrete molecules. It is of fundamental interest to prepare and investigate heterostructures based on molecular conductors or molecular magnets, such as single-molecule magnets (SMMs). Herein, we demonstrate the fabrication of a series of molecular heterostructures composed of (TTF)2M(pdms)2 (TTF = tetrathiafulvalene, M = Co(II), Zn(II), Ni(II), H2pdms = 1,2-bis(methanesulfonamido)benzene) multiple building blocks through a well-controlled step-by-step electrocrystallization growth process, where the Co(pdms)2, Ni(pdms)2, and Zn(pdms)2 anionic complex is a SMM, paramagnetic, and diamagnetic molecule, respectively. Magnetic and SMM properties of the heterostructures were characterized and compared to the parentage (TTF)2Co(pdms)2 complex. This study presents the first methodology for creating molecule-based magnetic heterostructural systems by electrocrystallization.

Photo‐responsive Single‐Molecule Magnet Showing 0D to 1D Single‐Crystal‐to‐Single‐Crystal Structural Transition and Hysteresis Modulation

AbstractPhoto‐responsive lanthanide‐based single‐molecule magnets (SMM) hold great promise for future switching and memory devices. Herein, we report a dysprosium phosphonate [DyIII(SCN)2(NO3)(depma)2(4‐hpy)2] (1Dy), which features a supramolecular framework containing layers of hydrogen‐bonding network and pillars of π–π interacted anthracene units. The photocycloaddition reaction of anthracene pairs led to a rapid and reversible single‐crystal‐to‐single‐crystal (SC–SC) structural transition to form the 1D coordination polymer [DyIII(SCN)2(NO3)(depma2)(4‐hpy)2]n (2Dy), accompanied by photoswitchable SMM properties with the reduction of effective energy barrier by half and the narrowing of the butterfly‐like hysteresis loop. The diluted sample showed a photo‐induced switch of the blocking temperature (TB) from 3.8 K for 1Dy@Y to 2.6 K for 2Dy@Y. This work may inspire the construction of lanthanide‐based molecular materials with targeted photo‐responsive magnetic properties.

Photo-responsive Single-Molecule Magnet Showing 0D to 1D Single-Crystal-to-Single-Crystal Structural Transition and Hysteresis Modulation.

Photo-responsive lanthanide-based single-molecule magnets (SMM) hold great promise for future switching and memory devices. Herein, we report a dysprosium phosphonate [DyIII (SCN)2 (NO3 )(depma)2 (4-hpy)2 ] (1Dy), which features a supramolecular framework containing layers of hydrogen-bonding network and pillars of π-π interacted anthracene units. The photocycloaddition reaction of anthracene pairs led to a rapid and reversible single-crystal-to-single-crystal (SC-SC) structural transition to form the 1D coordination polymer [DyIII (SCN)2 (NO3 )(depma2 )(4-hpy)2 ]n (2Dy), accompanied by photoswitchable SMM properties with the reduction of effective energy barrier by half and the narrowing of the butterfly-like hysteresis loop. The diluted sample showed a photo-induced switch of the blocking temperature (TB ) from 3.8 K for 1Dy@Y to 2.6 K for 2Dy@Y. This work may inspire the construction of lanthanide-based molecular materials with targeted photo-responsive magnetic properties.

Lanthanide Single-molecule Magnets: Synthetic Strategy, Structures, Properties and Recent Advances.

Single-molecule magnets (SMMs) show wide potential applications in the field of ultrahigh-density storage materials, quantum computing, spintronics, and so on. Lanthanide (Ln) SMMs, as an important category of SMMs, open up a promising prospect due to their large magnetic moments and huge magnetic anisotropy. However, the construction of high performance for Ln SMMs remains an enormous challenge. Although remarkable advances are focused on the topic of Ln SMMs, the research on Ln SMMs with different nuclear numbers is still deficient. Therefore, this review summarizes the design strategies for the construction of Ln SMMs, as well as the metal skeleton types. Furthermore, we collect reported Ln SMMs with mononuclearity, dinuclearity, and multinuclearity (three or more Ln spin centers) and the SMM properties including energy barrier (Ueff ) and pre-exponential factor (τ0 ) are described. Finally, Ln SMMs with low-nuclearity SMMs, especially for single-ion magnets (SIMs), are highlighted to understand the correlations between structures and magnetic behavior of the detail SMM properties are described. We expect the review can shed light on the future developments of high-performance Ln SMMs.

Something You Need Might Be under Your Feet: Molecular Magnetism of Heavy Kramers Lanthanide Hydrated Chlorides and Their Complexes with Polydentate Terpy Ligand

A study of the molecular magnetism of the hydrated salts [Ln(H2O)6Cl2]Cl (Ln = Gd (1Gd), Dy (1Dy), Er (1Er), Yb (1Yb)) and lanthanide chloride complexes with 2,2′;6′,2″-terpyridine (terpy) synthesized on their basis, [Ln(H2O)4(terpy)Cl]Cl2·3H2O (Ln = Gd (2Gd), Dy (2Dy), Er (2Er), and Yb (2Yb), was carried out. It was found that both the initial hydrated chlorides containing Dy, Er, Yb, and their derivatives with terpyridine exhibit the properties of single-molecule magnets. For the complexes with terpyridine, the values of the remagnetization barriers increase from Er to Dy, while for the aquachlorides, the corresponding values increase in the series Ueff (1Dy) < Ueff (1Er). It was found that magnetic relaxation in Yb complexes mostly proceeds according to the Raman mechanism.

From dinuclear to two-dimensional Dy(iii) complexes: single crystal–single crystal transformation and single-molecule magnetic behavior

A novel 2D Dy-MOF and three dinuclear Dy(iii) complexes exhibit ligand-based fluorescence and single-molecule magnetic properties, and the dinuclear species undergo consecutive single-crystal to single-crystal transformation.

Structural variation, magnetism and single-source deposition of lanthanide-containing polyoxotitanates.

Heterometal-containing polyoxotitanates (POTs) are much-studied single-source precursors (SSPs) for doped TiO2. In this work the properties of a wide range of lanthanide-containing POTs are studied to assess their potential use as SSPs for Ln-Ti hybrid oxides. The novel cage compounds [{Ti2O(OEt)8}(EtOH·LnCl)]2 (Ln = Sm, Gd, Tb, Dy, Ho, Tm and Yb) are structurally characterised. The magnetic properties of the Ln = Dy and Ho compounds were characterised using SQUID magnetometry-in both cases, there is evidence of significant uniaxial magnetic anisotropy, but magnetic relaxation is fast and therefore no single-molecule magnetic properties are observed. Upon decomposition lanthanide-doped anatase (Ln = La) or titania/LnTi-oxide mixtures are obtained, which show efficient stabilisation of the catalytically active anatase phase up to high temperatures, making the materials of potential interest for applications in photocatalysis.

Isotopic enrichment in lanthanide coordination complexes: contribution to single-molecule magnets and spin qudit insights.

Lanthanide Single-Molecule Magnets (SMMs) fascinate the scientific community due to their plethora of potential applications ranging from data storage to spintronic devices and quantum computing. This review article proposes a comprehensive description of the influence of the nuclear spin, i.e. hyperfine interaction, on the magnetic properties of lanthanide SMMs and on quantum information processing of qudit. This influence is analysed for non-Kramers and Kramers lanthanide SMMs as well as for the electronic distribution of the electron in 4f orbitals i.e. oblate and prolate ions. Then the role of magnetic interactions in isotopically enriched polynuclear Dy(III) SMMs is discussed. Finally the possible effect of superhyperfine interaction due to the nuclear spin of elements originating from the surrounding of the lanthanide centre is analyzed. The effect of nuclear spin on the dynamics of the lanthanide SMMs is demonstrated using different techniques such as magnetometry, muon spectroscopy (μ-SR), and Mössbauer and Resonance Vibrational Spectroscopies.

Tetranuclear lanthanide complexes display significant slow magnetic relaxation with an open hysteresis loop and the magnetocaloric effect

Herein, we report two tetranuclear lanthanide complexes, of which the Dy4-complex exhibits significant single-molecule magnetic properties with the open hysteresis loop is detected until 6.5 K and a coercive field of 453 Oe is observed at 1.8 K.

Novel stable ytterbium acetylacetonate-quinaldinate complexes as single-molecule magnets and surprisingly efficient luminophores.

The first Yb complexes comprising a quinoline-2-carboxylate (quinaldinate, Q-) ligand, namely 1D-polymeric [Yb(acac)2(Q)]n (1, acac- is the acetylacetonate (pentane-2,4-dionate) anion) and mononuclear [Yb(acac)2(Q)(Phen)] (2, Phen is 1,10-phenanthroline), are reported. The bifunctionality of both complexes as field-induced single-molecule magnets (SMMs) and near IR luminophores has been revealed. The SMM properties of 1 and 2 have been discussed in terms of the geometry and composition of the coordination environment. Also, 1 is the first example of 1D-polymeric SMMs with the capped octahedral surrounding of Yb3+. The photoluminescence quantum yields (PLQYs) of 1 and 2 are 2 and 4%, respectively. The origins of this difference are discussed. Surprisingly, the PLQY value of 2 is high for compounds comprising a lot of C-H vibrational quenchers, being the highest one for reliably characterized Yb β-diketonate complexes, and surpassing those for complexes with a broad range of anionic ligands. In this respect, the role of the Phen ligand is to tune the coordination mode of Q- thereby decreasing the energy of coordinating C-O oscillators rather than to act as a typical antenna ligand. These results can give rise to an alternative route to elaborate efficient Yb-based luminophores via the substitution of the β-diketonate ligands controlled by the introduction of appropriate neutral ligands.

Anion-Manipulated Hydrolysis Process Assembles of Giant High-Nucleation Lanthanide-Oxo Cluster.

Widespread concern has been raised over the synthesis of highly nucleated lanthanide clusters with special shapes and/or specific linkages. Construction of lanthanide clusters with specific shapes and/or linkages can be achieved by carefully regulating the hydrolysis of lanthanide metal ions and the resulting hydrolysis products. However, studies on the manipulation of lanthanide-ion hydrolysis to obtain giant lanthanide-oxo clusters have been few. In this study, we obtained a tetraicosa lanthanide cluster (3) by manipulating the hydrolysis of Dy(III) ions using an anion (OAc-). As far as we know, cluster 3 has the highest nucleation among all lanthanide-oxo clusters reported. In 3, two triangular Dy3O4 are oriented in opposite directions to form the central connecting axis Dy6(OH)8, which is in turn connected to six Dy3O4 that are oriented in different directions. Meanwhile, a sample of a chiral trinuclear dysprosium cluster (1) was obtained in a mixed CH3OH and CH3CN solvent and by replacing the anion in the reaction to Cl- ions. In this cluster, 1,3,4-thiadiazole-2,5-diamine (L2) is free on one side through π···π interactions and is parallel to the o-vanillin (L1)- ligand, thus resulting in a triangular arrangement. The arrangement of L2 affects the end group coordination in the cluster 1 structure through hydrogen bonding and induces the cluster to exhibit chirality. When the reaction solvent was changed to CH3OH, a sample of cluster 2, composed of two independent triangular Dy3 that have different end group arrangements, was obtained. Magnetic analysis showed that clusters 1 and 3 both exhibit distinctive single-molecule magnetic properties under zero-magnetic-field conditions. This study thus provides a method for the creation of chiral high-nucleation clusters from achiral ligands and potentially paves the way for the synthesis of high-nucleation lanthanide clusters with unique forms.

Detailed magnetic properties and theoretical calculation in ferromagnetic coupling DyIII-MII 3d-4f complexes based on a 1,4,7,10‑tetraazacyclododecane derivative

Four Dy-based 3d-4f complexes [MIIDyIII(H2L)(NO3)3](CH3OH)2 (H4L = N,N',N'',N'''-tetra(2-hydroxy-3-methoxy-5-methylbenzyl)-1,4,7,10-tetraazacyclododecane, M = Mn (2), Fe (3), Co (4) and Ni (5), the solvent of compound 5 is uncertain) were synthesized through the reference method of complex [ZnIILnIII(H2L)(NO3)3](CH3OH)2 (1). The magnetic properties of all the five complexes were measured for comparison. The magnetic results show that all the complexes except 4 behave as single-molecule magnets (SMMs). The magnetostructural analysis and theoretical calculation indicate the ferromagnetic coupling in 2, 3 and 5 as well as the antiferromagnetic coupling in 4 between DyIII and transition metal ions, while the SMM properties of 1 are caused by the anisotropy of single DyIII ions only. Unexpectedly, neither of the magnetic anisotropic ions in one molecule, namely DyIII and CoII, provides greater advantages for SMM performance. This investigation experimentally proves that the coexistence of magnetic anisotropy of lanthanide ions and ferromagnetic coupling between lanthanide and transition metal ions is important for the design of 3d-4f SMMs.

Effects of Counterions, Coordination Anions, and Coordination Solvent Molecules on Single-Molecule Magnetic Behaviors and Nonlinear Optical Properties of Chiral Zn2Dy Schiff Base Complexes.

By changing the counterions (ClO4- and CF3SO3-) and the coordination anions (Cl- and Br-), we investigated their influences on the structures and performances of a class of Zn2Dy chiral single-molecule magnets (SMMs), which are based on a pair of chiral Schiff bases R,R-H2LSchiff and S,S-H2LSchiff {R,R-H2LSchiff = 2-((E)-((1R,2R)-2-((E)-2-hydroxy-3-methoxybenzylideneamino)cyclohexylimino)methyl)-6-methoxyphenol and S,S-H2LSchiff = 2-((E)-((1S,2S)-2-((E)-2-hydroxy-3-methoxybenzylideneamino)cyclohexylimino)methyl)-6-methoxyphenol}. Three pairs of chiral Zn2Dy Schiff base complexes were obtained by directed synthesis, which are [DyZn2(R,R-LSchiff)Cl2(H2O)](ClO4)·0.5MeOH·0.25H2O (R-1) and [DyZn2(S,S-LSchiff)Cl2(H2O)][DyZn2(S,S-LSchiff)Cl2(MeOH)](ClO4)2·MeOH·0.5H2O (S-1), [DyZn2(R,R-LSchiff)Cl2(H2O)](CF3SO3)·0.5MeOH (R-2) and [DyZn2(S,S-LSchiff)Cl2(H2O)][DyZn2(S,S-LSchiff)Cl2(MeOH)](CF3SO3)2·MeOH (S-2), and [DyZn2(R,R-LSchiff)Br2(H2O)](CF3SO3)·0.25MeOH (R-3) and [DyZn2(S,S-LSchiff)Br2(H2O)][DyZn2(S,S-LSchiff)Br2(MeOH)](CF3SO3)2 (S-3). They all exhibit good SMM behaviors, and their magnet relaxation is regulated by not only the counterions (ClO4- and CF3SO3-) but also the coordination anions (Cl- and Br-); these anions also have important effects on the second-harmonic generation (SHG) and third harmonic generation (THG) nonlinear optical properties. Interestingly, in the S-configuration complexes, the coordination solvent molecule of the Dy3+ ion on half of the molecules is the methanol molecule instead of the water molecule. This change in the coordinating solvent molecule can also significantly affect the SMM behaviors and the SHG and THG nonlinear optical properties. Moreover, ab initio calculations were applied to rationally explain the SMM properties.

Solvent Modification of the Structures and Magnetic Properties of a Series of Dysprosium(III) Single-Molecule Magnets.

Solvent effects on the structures and magnetic properties of single-molecule magnets (SMMs) have been of great interest for modification of the SMMs using chemical modulation. By systematically varying the reaction solvents (MeOH, ethanol, n-propanol, and n-butanol), we have successfully synthesized a series of DyIII-H4daps complexes (H4daps = N',N‴-[(1E,1'E)-pyridine-2,6-diylbis(ethan-1-yl-1-ylidene)]bis(2-hydroxybenzohydrazide), including two binuclear compounds, [Dy2(H2daps)2(MeOH)4(H2O)2](CF3SO3)2·0.5MeOH (1MeOH) and [Dy2(H2daps)3(EtOH)2]·2EtOH·Et2O (2EtOH), and two mononuclear compounds, [Dy(H4daps)2](CF3SO3)3·n-PrOH (3PrOH) and [Dy(H4daps)(CF3SO3)3(n-BuOH)]·0.5Et2O (4BuOH). Using different solvents, the ligand-to-metal ratios can be adjusted from 1:1 in 1MeOH and 4BuOH to 3:2 in 2EtOH and 2:1 in 3PrOH. Through the solvent crossover experiments, the role of the solvents and the conditions to form these complexes were carefully studied. The size of the different alcohols, their coordination ability to the DyIII center, and the solubility of the complexes in these alcohols might affect the assembly process and lead to modification of the structures and magnetic properties of these DyIII-H4daps complexes. Magnetic studies revealed that these four complexes all exhibit slow magnetic relaxation under a zero or an applied direct-current field, with an energy barrier of about 100 K for the binuclear compound 1MeOH. In combination with theoretical calculations, the magnetic-structure relationship of these four compounds has been analyzed. This work demonstrates the crucial role of different solvent molecules in the fine-tuning of the structures and magnetic performances of different lanthanide complexes.