Single-core Fiber Research Articles

Reflective High-Sensitivity Humidity Sensor Based on Single Mode-No Core-Seven Core Fiber Structure

Reflective High-Sensitivity Humidity Sensor Based on Single Mode-No Core-Seven Core Fiber Structure

Supermode lasing and light amplification in multicore bismuth-doped fiber

Multicore fibers are promising structures with specific light propagation properties, which can be managed to benefit several applications in optical communications, fiber lasers and amplifiers, high-resolution imaging, and fiber-based sensors. The current use of multicore fibers in laser technology is mainly focused on in-phase coherent beam combining in far-field regions (out-cavity) using bulk optical elements. However, this approach is challenging in terms of the power scalability of all-fiber lasers (intra-cavity), particularly with using low-gain media, where it is needed to provide mode-coupling (supermode propagation) stability along relatively long lengths. Here, we report a conceptual design and fabrication of a multicore bismuth-doped fiber that is capable of achieving light amplification and stable lasing in the E-telecom band inside the cavity using the supermode selection approach. By analysis of experimental and simulation data, it was found that the employment of the proposed design of a Bi-doped fiber provides a considerable advantage over the single-core fiber in terms of laser performance (output power, slope efficiency) in the cladding-pumped configuration. These results open up new opportunities for further advancement of the optical fiber technology towards efficient bismuth-doped fiber-integrated amplifiers and lasers for the O+E+S+C+L+U-telecom bands, which may find important applications, especially for the development of next-generation multiband optical transmission systems.

Chirally-coupled-ring fibers for arbitrary-order orbital angular momentum mode generation and detection.

A novel chirally-coupled-ring fiber (CCRF) is proposed for efficiently generating and detecting arbitrary-order orbital angular momentum (OAM) modes in ring-core fibers (RCFs). The CCRF comprises inner and outer cores, N angularly uniformly distributed dielectric rods, and a cladding layer. These rods, twisted along the fiber axis between the cores, introduce angular geometry perturbations to manipulate the core modes. Through meticulous theoretical modeling and systematic analysis grounded in coupled-mode theory, we reveal CCRF eigenmodes carrying spin-entangled OAM, elucidate the mode coupling and power transfer in CCRFs, and present the CCRF design principle. Utilizing the full-vector beam propagation method, we carry out a proof-of-principle experimental system to demonstrate the capability of CCRFs in OAM mode manipulation and their feasibility and superiority in system-level applications. Additionally, we generate OAM modes across a wide range of topological charges from ℓ = -8 to ℓ = 8 using CCRFs, with conversion efficiencies from 92.10% to 99.63% and mode purities from 90.28% to 99.48%. Attributed to a coaxial dual-core structure with core-separated geometry perturbations, CCRFs enable flexible manipulation of arbitrary-order OAM modes without altering core geometry parameters, effectively solving design flexibility and compatibility problems in conventional single-core fiber devices. The proposed CCRF holds great promise for fiber-based OAM applications, especially for RCF-based OAM multiplexing communications.

Amplification technology for spatial division multiplexing signals transmitted using multicore fibres

AbstractAmplification technologies needed for spatial division multiplexing (SDM) signal transmission have been reported, especially focusing on submarine systems, which have stricter requirements than terrestrial ones. As the first step of a large‐scale commercialisation, 2‐core un‐coupled (UC) fibre production has already been announced. However, optical amplifiers for SDM signals are still under investigation because SDM amplifiers have various architectural possibilities, depending on the requirements to be considered in designing systems. The multicore erbium‐doped fibre amplifier (MC‐EDFA) architecture is classified from the viewpoint of the number of erbium‐doped fibre (EDF) cores and its pumping method. Core pumped MC‐EDFA is more compatible with the conventional single‐core fibre (SCF)‐ based system and more mature than cladding pumped MC‐EDFA. However, cladding pumped MC‐EDFA has a unique feature of collective amplification of all cores in a single multicore fibre (MCF) and the potential of large‐scale integration of amplification cores in a single package. For a feasibility study, a C‐band 19‐core cladding pumped MC‐EDFA prototype is fabricated using a 19‐core isolator. A half volume of the equivalent conventional single‐core (SC‐) EDFA is successfully demonstrated. One unique feature of UC‐MCF is bidirectional (BD‐) transmission using a single UC‐MCF. Signal transmission direction can differ from core to core. This feature is useful for efficiently accommodating traffic of asymmetric communication data and expanding transmission capacity at a constant transmission distance. A C‐band 7‐core cladding pumped BD‐MC‐EDFA prototype is fabricated for the bidirectional MCF transmission line. Experimental results show transmission capacity was expanded by 17% using the prototype when bidirectional signal assignment was adapted. Towards practical use, optical components suitable for MC‐EDFA need to be developed to draw out potential advantages of SDM technologies.

Enhanced Coexistence of Quantum Key Distribution and Classical Communication over Hollow-Core and Multi-Core Fibers.

In this paper, we investigate the impact of classical optical communications in quantum key distribution (QKD) over hollow-core fiber (HCF), multi-core fiber (MCF) and single-core fiber (SCF) and propose wavelength allocation schemes to enhance QKD performance. Firstly, we theoretically analyze noise interference in QKD over HCF, MCF and SCF, such as spontaneous Raman scattering (SpRS) and four-wave mixing (FWM). To mitigate these noise types and optimize QKD performance, we propose a joint noise suppression wavelength allocation (JSWA) scheme. FWM noise suppression wavelength allocation and Raman noise suppression wavelength allocation are also proposed for comparison. The JSWA scheme indicates a significant enhancement in extending the simultaneous transmission distance of classical signals and QKD, reaching approximately 100 km in HCF and 165 km in MCF under a classical power per channel of 10 dBm. Therefore, MCF offers a longer secure transmission distance compared with HCF when classical signals and QKD coexist in the C-band. However, when classical signals are in the C-band and QKD operates in the O-band, the performance of QKD in HCF surpasses that in MCF. This research establishes technical foundations for the design and deployment of QKD optical networks.

100-km entanglement distribution with coexisting quantum and classical signals in a single fiber

The development of prototype metropolitan-scale quantum networks is underway and entails transmitting quantum information via single photons through deployed optical fibers spanning several tens of kilometers. The major challenges in building metropolitan-scale quantum networks are compensation for polarization fluctuation, high-precision clock synchronization, and compensation for cumulative transmission time fluctuations. One approach addressing these challenges is to copropagate classical probe signals in the same fiber as the quantum signal. Thus, both signals experience the same conditions, and the changes of the fiber can therefore be monitored and compensated. Here, we demonstrate the distribution of polarization-entangled quantum signals copropagating with the White Rabbit precision time protocol classical signals in the same single-core fiber strand at metropolitan-scale distances. Our results demonstrate the feasibility of this quantum-classical coexistence by achieving high-fidelity entanglement distribution between nodes separated by 100 km of optical fiber. This advancement is a significant step towards the practical implementation of robust and efficient metropolitan-scale quantum networks.

Power Over Fiber and Analog Radio Over Fiber Simultaneous Transmission Over Long Distance in Single Mode, Multicore, and Hollow Core Fibers

AbstractIn this work, a novel study of the feasibility of shared Power over Fiber (PoF) and Fifth‐Generation (5G) New Radio (NR) Analog Radio over Fiber (ARoF) over long distance Hollow‐core Fibers (HCF) is presented. Comparative measurements between similar lengths of HCFs, Multicore (MCF) and Single Mode Fibers (SMF) are performed. A complete analysis on the Stimulated Raman Scattering (SRS)‐induced noise transfer from PoF to ARoF is tackled. Relative Intensity Noise (RIN) of ARoF signals is measured for all the optical fibers tested, observing no degradation in HCFs, neither on MCFs and significant deterioration in SMFs. A combination of PoF and 5G NR ARoF link in a single fiber is implemented, and 5G NR signals with different modulation formats are successfully transmitted through HCFs and MCFs without degradation, while SRS‐induced noise transfer in SMFs massively deteriorate them. PoF transmission efficiencies are also analyzed, achieving up to 9.9 % System Energy Efficiency (SEE) for a 3.1 km HCF, 0.9 % for a 11.1 km HCF and 1.5 %, 13.5 %, and 20.4 % in a 10 km MCF, a 9.8 km SMF and a 3.3 km SMF, respectively. The PoF signal is used to supply a Bluetooth Low‐Energy (BLE) load with a power consumption of 20 mW.

Twist compensated, high accuracy and dynamic fiber optic shape sensing based on phase demodulation in optical frequency domain reflectometry

We present a twist compensated, high accuracy and dynamic fiber optic shape sensing based on phase demodulation in Optical Frequency Domain Reflectometry (OFDR) by using multiple single core fiber based sensor (MFS). A dynamic strain sensing is realized by tracking the optical phase in OFDR and combining with the phase de-hopping filtering algorithm, and the sensing spatial resolution reaches 45 μm. In addition, in order to eliminate the influence of external twist and fluctuation of inherent spin on the shape reconstruction results, we propose an external twist compensation method and inherent spin rate calibration method, respectively. Finally, we use a circle segment method to reconstruct a 3D shape of MFS. The experimental results show that the reconstruction accuracies by the proposed external twist compensation and inherent spin rate calibration methods increase over 18 times and 20 times than those without these two methods, respectively. At the same time, comparing with the traditional cross-correlation-based method, we find that the proposed phase demodulation method has a similar reconstruction accuracy, the maximum reconstruction error is 0.61 %, whereas the shape reconstruction speed is improved by nearly 10 times. This is of great significance for the application of FOSS, which can be used for dynamic shape sensing such as intelligent soft robots, surgical robot and etc.

In vivo assessment of bladder cancer with diffuse reflectance and fluorescence spectroscopy: A comparative study.

The aim of this work is to assess the performance of multimodal spectroscopic approach combined with single core optical fiber for detection of bladder cancer during surgery in vivo. Multimodal approach combines diffuse reflectance spectroscopy (DRS), fluorescence spectroscopy in the visible (405 nm excitation) and near-infrared (NIR) (690 nm excitation) ranges, and high-wavenumber Raman spectroscopy. All four spectroscopic methods were combined in a single setup. For 21 patients with suspected bladder cancer or during control cystoscopy optical spectra of bladder cancer, healthy bladder wall tissue and/or scars were measured. Classification of cancerous and healthy bladder tissue was performed using machine learning methods. Statistically significant differences in relative total haemoglobin content, oxygenation, scattering, and visible fluorescence intensity were found between tumor and normal tissues. The combination of DRS and visible fluorescence spectroscopy allowed detecting cancerous tissue with sensitivity and specificity of 78% and 91%, respectively. The addition of features extracted from NIR fluorescence and Raman spectra did not improve the quality of classification. This study demonstrates that multimodal spectroscopic approach allows increasing sensitivity and specificity of bladder cancer detection in vivo. The developed approach does not require special probes and can be used with single-core optical fibers applied for laser surgery.

Low-loss C-band all-fiber FIFO device by novel bridge fiber

Multi-core fibers (MCF) technology is the feasible path to extend the capacity of optical fiber communication systems. However, there is a lack of low-loss and low-crosstalk multi-core fan-in and fan-out (FIFO) devices for MCF communication in the C-band. In this paper, we proposed all-fiber FIFO devices with seven trench-assisted bridge fibers (TABFs). The special structure of the TABFs could facilitate the matching of single-core fiber with MCF during the tapering progress. By using the TABFs, the average taper loss was less than 0.06 dB. The novel method can reduce the insertion loss of FIFO devices. The experiments indicated that the fabricated FIFO devices exhibited lower than 0.50 dB insertion loss and less than −55.2 dB crosstalk in the C-band. This work provides novel TABFs and an efficient way to fabricate low-loss low-crosstalk FIFO devices for MCF communication systems.

Numerical Modeling of Mid-IR Lasers Based on Tb-Doped Chalcogenide Multicore Fibers

Mid-IR fiber lasers operating at wavelengths near 5 μm are of great interest for many fundamental and industrial applications, but only a few experimental samples based on active chalcogenide fibers have been demonstrated so far. One of the limitations of the power of such lasers may be a fairly low fiber damage threshold. To solve this problem, we developed and numerically investigated in detail a mid-IR fiber laser at 5.3 µm with multi-W output power pumped into the cladding at a wavelength of 2 µm. We proposed using a Tb-doped chalcogenide multicore fiber with 25 single-mode cores arranged in a 5 × 5 square lattice as an active medium. The proposed laser design surpasses the power limit of single-core chalcogenide fibers. When simulating lasers, we specified realistic parameters of Tb-doped chalcogenide glass based on published experimental data. We performed a comprehensive theoretical analysis, studied the influence of various factors on the characteristics of generation, and found optimal system parameters and expected generation parameters.

Mid-infrared seven-core chalcogenide fiber with ultra-large mode field area and high beam quality

A seven-core chalcogenide fiber with an ultra-large mode field for mid-infrared range of 2.5–11 μm is designed and fabricated. Through manipulation of the core radius and pitch in the seven-core configuration, we are engaged in a comprehensive exploration of crosstalk characteristics and the mode field area (MFA). In addition, the relationship between the parameters of seven-core fiber for infrared and the beam quality of the output laser is analyzed for the first time. A theoretical MFA of 8914 μm2 can be calculated with a core radius of 24 μm and the pitch of 50 μm. This impressive MFA is realized through the deployment of an improved drilling technique in the fabrication of a Ge–As–Se seven-core fiber. The fiber has a relatively low loss at the wavelength range of 2.5–11 μm, and the minimum loss is 1.4 dB m−1 at 8.5 μm. The measured MFA of the fiber at 10.6 μm is 7364 μm2, which is 6.2 times higher than that of traditional stepped single-core fiber, but slightly lower than the theoretical value. The power delivery capability of the fiber has been significantly improved about two times compared with that of single-core fiber. The output beam quality factor M 2 is calculated as 1.13. In all, the seven-core fiber exhibits substantial potential for high-power laser propagation with high quality and flexibility.

Ultra-broadband frequency shifting of laser pulses in a square multicore chalcogenide fiber.

The process of Raman frequency shifting of out-of-phase laser pulses in fibers with a square configuration of weakly coupled cores having two or more zero dispersion wavelengths has been studied. The use of out-of-phase distributions in multicore fibers makes it possible to increase pulse energies by orders of magnitude in comparison with the case of single-core fibers. Conditions for the stability of out-of-phase laser pulses are determined and confirmed by numerical simulations. A configuration of chalcogenide multicore fiber with three zero dispersion wavelengths is proposed, allowing ultra-broadband frequency shifting of laser pulses up to 6.2 μm with an energy efficiency of more than 25%.

A novel multicore Er/Yb co-doped microstructured optical fiber amplifier with peanut-shaped air holes cladding

Abstract The multicore fiber amplifier, as a key component in spatial division multiplexing (SDM) communication systems, presents higher technical difficulty compared to traditional multi-channel single core fiber amplifiers, which has sparked widespread attention. To achieve balance, efficiency, miniaturization, and cost-effectiveness in the performance of multi-core optical fiber amplifiers, we propose an innovative triple cladding 13-core Er/Yb co-doped microstructured fiber (13CEYDMOF). The proposed fiber features an outer cladding with peanut-shaped air holes, which enables uniform excitation of the 13 cores using a single multimode laser pump source within the inner cladding. This approach also prevents damage or aging of the fiber’s outer coating due to the pump laser. Furthermore, the design of Peanut-Shaped Air Holes effectively increases the numerical aperture (NA) of the inner cladding while reducing the outer diameter of the fiber, enhancing the fiber’s mechanical flexibility. To address the coupling difficulties caused by air holes, we bi-directionally pump the 13CEYDMOFA by utilizing a combined technique of the side winding and end pumping. The experimental results show that the 13CEYDMOFA can achieve an average gain of 23.8 dB, a noise figure (NF) of ∼4.6 dB, and an inter-core gain difference of less than 2 dB in the wavelength range of 1529–1565 nm. The in-line amplified transmission experiment demonstrates that the 13CEYDMOFA is well suited for the 13 spatial channels transmission. To the best of our knowledge, this is the first time to realize high performance telecommunication band amplification in a multicore microstructure fiber.

In-situ multicore fibre-based pH mapping through obstacles in integrated microfluidic devices.

Microfluidic systems with integrated sensors are ideal platforms to study and emulate processes such as complex multiphase flow and reactive transport in porous media, numerical modeling of bulk systems in medicine, and in engineering. Existing commercial optical fibre sensing systems used in integrated microfluidic devices are based on single-core fibres, limiting the spatial resolution in parameter measurements in such application scenarios. Here, we propose a multicore fibre-based pH system for in-situ pH mapping with tens of micrometer spatial resolution in microfluidic devices. The demonstration uses custom laser-manufactured glass microfluidic devices (called further micromodels) consisting of two round ports. The micromodels comprise two lintels for the injection of various pH buffers and an outlet. The two-port system facilitates the injection of various pH solutions using independent pressure pumps. The multicore fibre imaging system provides spatial information about the pH environment from the intensity distribution of fluorescence emission from the sensor attached to the fibre end facet, making use of the cores in the fibre as independent measurement channels. As proof-of-concept, we performed pH measurements in micromodels through obstacles (glass and rock beads), showing that the particle features can be clearly distinguishable from the intensity distribution from the fibre sensor.

Multi-layered cladding based ultra-low loss, single mode antiresonant hollow core fibers

In reality, an efficient platform for high-power laser delivery is highly important, which can be justified by readily available fiber lasers, and hollow-core fiber can be the best platform for guiding high optical power over long distances. The constraints include designing new cladding geometry, which may lead to a higher laser induced damage threshold in the fiber’s structure, having low losses along with a single mode nature. This article reports a new antiresonant fiber that has a hollow core and a triple-layered cladding configuration with only circular tube elements. The effects of multiple layers corresponding to the number of tube rings in the cladding geometry are well explored, which leads to understanding the physical insight of inter-layers. In comparison to double-layered cladding elements fiber, the proposed fiber significantly reduces loss by an order of two and reveals a minimum leakage loss of 5.82 × 10−5 dB/km at the chosen wavelength of 1.06 µm through the proper arrangement of cladding elements. We achieved a maximal higher order mode extinction ratio of about 104 (indicates the excellent single mode properties) and comparatively a little bending-induced loss of 9.00 × 10−4 dB/km, when the radius of bending is 14 cm. As a result, our studies on new multilayer fiber designs are not only useful for delivering high laser power but also serve as guidelines for the experimental realization of future multilayered cladding fibers.

Design and fabrication of large-mode-area multicore chalcogenide fiber with low bending loss.

Multicore fiber (MCF) has a larger mode-area (LMA) compared to traditional single-core fiber, making it easy to get a mode area of more than 3000 µm2 with an optimized MCF structure. Here, a fine-structured 19-core fiber based on chalcogenide glass was fabricated using a combined method involving extrusion, drilling, and rod-in-tube for the first time. The fiber has a minimum transmission loss of 1.8 dB/m at 6.7 µm. When the bending radius exceeds 6 cm, a low bending loss of about 0.6 dB appears, and the experimental data are in good agreement with the simulation results. In addition, the supermode characteristics of the 19-core fiber are analyzed from both perspectives of simulation and experiment, and these results are perfectly in good agreement. We believe it opens a new way to develop high-power and bend-resisting fiber with such kind of multicore structure.

Optical Fiber-Based Needle Shape Sensing in Real Tissue: Single Core vs. Multicore Approaches.

Flexible needle insertion procedures are common in minimally-invasive surgeries for diagnosing and treating prostate cancer. Bevel-tip needles provide physicians the capability to steer the needle during long insertions to avoid vital anatomical structures in the patient and reduce post-operative patient discomfort. To provide needle placement feedback to the physician, sensors are embedded into needles for determining the real-time 3D shape of the needle during operation without needing to visualize the needle intra-operatively. Through expansive research in fiber optics, a plethora of bio-compatible, MRI-compatible, optical shape-sensors have been developed to provide real-time shape feedback, such as single-core and multicore fiber Bragg gratings. In this paper, we directly compare single-core fiber-based and multicore fiber-based needle shape-sensing through similarly constructed, four-active area sensorized bevel-tip needles inserted into phantom and ex-vivo tissue on the same experimental platform. In this work, we found that for shape-sensing in phantom tissue, the two needles performed identically with a p-value of 0.164 > 0.05, but in ex-vivo real tissue, the single-core fiber sensorized needle significantly outperformed the multicore fiber configuration with a p-value of 0.0005 < 0.05. This paper also presents the experimental platform and method for directly comparing these optical shape sensors for the needle shape-sensing task, as well as provides direction, insight and required considerations for future work in constructively optimizing sensorized needles.

Whispering-Gallery Mode Micro-Ring Resonator Integrated with a Single-Core Fiber Tip for Refractive Index Sensing

A micro-ring resonator structure was fabricated via the two-photon polymerization technique directly on a single-mode fiber tip and tested for refractive index sensing application. The micro-ring structure was used to excite whispering-gallery modes, and observations of the changes in the resonance spectrum introduced by changes in the refractive index of the environment served as the sensing principle. The proposed structure has the advantages of a very simple design, allowing for measurements in reflection mode, relatively easy and fast fabrication and integration with a single tip of a standard single-mode fiber, which allowed for quick and convenient measurements in the optical setup. The performance of the structure was characterized, and the resonant spectrum giving high potential for refractive index sensing was measured. Future perspectives of the research are addressed.

Dual-Core Ce: YAG-Derived Silicate Scintillation Fiber for Real-Time X-Ray Detection

A dual-core Ce:YAG-derived scintillation fiber (DCSF) was proposed conceptually, simulated numerically, and prepared experimentally by the modified molten core method (MCM) for the first time, of which, the core material is amorphous yttrium aluminosilicate glasses and the cladding material SiO2. Theoretically, it is found that such kind of DCSF exhibits very low inter-core crosstalk with the help of finite element simulation analysis, which may result from the high index difference of ∼0.097 between core and cladding. The average decay lifetime of the prepared DCSF are 31.4 ns and 36 ns at 350 nm and 500 nm, which are shorter than those of its Ce:YAG bulk crystal counterpart. Radiation monitoring was demonstrated by an all-fiber detection system. The radiation response of the DCSF bundle was also investigated, whose radio-luminescence response intensity is ∼1.66 and ∼1.12 times higher than that of the single-core fiber bundles with similar core-diameter and with similar core-area, respectively. In conclusion, with radiation detection performance improvement enabled by space division multiplexing capability, the DCSF not only provides a solution for the dilemma between low transmission loss and high optical yield, but also makes a substantial step towards the development of practical and reliable radiation detectors.