Single Atom Research Articles

On the Nature of HOPG-Supported Pt1Ti2O7 and its Decomposition of a Nerve Agent Simulant: A Cluster Model of a Single Atom Catalyst Active Site.

Chemical weapons, including hyper lethal nerve agents, are a persistently looming threat across the modern geopolitical landscape. There is a pressing need for the design and development of improved protective materials, which can be substantially aided by the cultivation of a fundamental molecular-level understanding of candidate systems and the corresponding decomposition chemistry. The emergence of the exciting new class of single atom catalyst (SAC) materials has enhanced the prospect of subnanoscale design tailoring in the hopes of optimizing activity and selectivity for a variety of chemical applications. Here, we apply our recently developed experimental technique for modeling the active sites of such SAC materials through the preparation of surface supported size-selected single metal-atom doped metal oxide clusters. The propensity for an SAC cluster model system for Pt1/TiO2 materials, Pt1Ti2O7 supported on highly oriented pyrolytic graphite (HOPG), to adsorb and decompose nerve agent simulant dimethyl methylphosphonate (DMMP) was investigated through a combination of temperature-programmed desorption/reaction (TPD/R) and X-ray photoelectron spectroscopy (XPS). XPS measurements of the as-prepared Pt1Ti2O7 clusters supported the successful isolation of single Pt atoms in clusters monodispersed across the HOPG surface. TPD/R experiments showed that the reactivity exhibited by the Pt1Ti2O7 clusters was distinct from that of Ti2O7 clusters lacking the single Pt atom. It was found that DMMP decomposed over Pt1Ti2O7 upon heating to as low as room temperature, and higher temperature treatments evolved exclusively H2O, CO, and H2, while decomposition over Ti2O7 evolved only methanol and formaldehyde at elevated temperatures. This indicated the promotion of C-H and PO-C bond cleavage within DMMP due to the presence of single Pt atoms in the clusters. Further, the Pt1Ti2O7 clusters were found to desorb P-containing decomposition species, preventing active site poisoning; however, a change of reactivity reflecting that of Ti2O7 was observed following a single TPD/R cycle. This suggested the encapsulation of active Pt sites by titanium oxide during high temperature treatment and is thus an issue deserving of serious attention in the study of Pt1/Ti2O7 SAC materials.

Atomic Dispersed Co on NC@Cu Core-Shells for Solar Seawater Splitting.

With freshwater resources becoming increasingly scarce, the photocatalytic seawater splitting for hydrogen production has garnered widespread attention. In this study, a novel photocatalyst consisting of a Cu core coated is introduced with N-doped C and decorated with single Co atoms (Co-NC@Cu) for solar to hydrogen production from seawater. This catalyst, without using noble metals or sacrificial agents, demonstrates superior hydrogen production effficiency of 9080 µmolg-1h-1, i.e., 4.78% solar-to-hydrogen conversion efficiency, and exceptional long-term stability, operating over 340h continuously. The superior performance is attributed to several key factors. First, the focus-light induced photothermal effect enhances redox reaction capabilities, while the salt-ions enabled charge polarization around catalyst surfaces extends charge carrier lifetime. Furthermore, the Co─NC@Cu exhibits excellent broad light absorption, promoting photoexcited charge production. Theoretical calculations reveal that Co─NC acts as the active site, showing low energy barriers for reduction reactions. Additionally, the formation of a strong surface electric field from the localized surface plasmon resonance (LSPR) of Cu nanoparticles further reduces energy barriers for redox reactions, improving seawater splitting activity. This work provides valuable insights into intergrating the reaction environment, broad solar absorption, LSPR, and active single atoms into a core-shell photocatalyst design for efficient and robust solar-driven seawater splitting.

Electronic and photocatalytic properties of Cu4 cluster-modified Ag/g-C3N4 single-atom catalysts: A hybrid DFT study

Increasing the active sites on the catalyst surface has been a key goal to increase the catalyst efficiency. This paper presents an efficient conversion of solar energy into chemical energy, realized by a Cu4 cluster-assisted single-atom catalyst (Ag-doped g-C3N4). The catalyst enhances charge transfer and light absorption, and the unique advantages of this approach in the field of photocatalysis are substantiated by density functional theory. Under the synergistic effect of Cu4 clusters, the electronic state density distribution of the Ag single-atom catalyst substrate is drastically altered, which realizes the increase of substrate active sites and rapid charge separation and transfer. Compared with the pristine substrate g-C3N4, the new electronic state distribution and the generation of impurity energy levels lead to the narrowing of the band gap from 2.77 to 1.83 eV, accelerating the transfer and separation of electrons and holes, and enlarging the visible light absorption range from 410 to 760 nm, thus improving the solar energy utilization. Despite the reduced band gap, the conduction and valance band edges of (Ag, Cu4) codoped g-C3N4 still have sufficient potential to split water. Therefore, to improve the photocatalytic performance under visible light, simultaneous codoping of the Ag single atom and Cu4 cluster on g-C3N4 is an effective strategy. The study provides theoretical support for further optimization of single-atom catalysts.

Metal single-atom interaction with graphitic C3N4 surface based on density functional theory calculations and linear regression analysis

This paper discusses the adsorption of metal single-atoms (SAs) on graphitic C3N4 (gCN) multilayered surface models based on density functional theory (DFT) calculations. We systematically searched stable adsorption sites on gCN and showed that the cavity site is preferred for metal SAs. We also discussed the usefulness of several descriptors, such as the distance between the SA and gCN, charge donation (electron transfer), and atomic radius, for evaluating the SA adsorption energy, based on the linear regression method. In addition, the most stable adsorption energy for fifth- and sixth-row metals can be predicted using only the “group” descriptor of the periodic table. The group descriptor is closely related to the atomic radius, and hence the stability of fifth- and sixth-row metals is determined from the fit between the SA radius and the gCN cavity size. The study findings facilitate the development of various metal-dopant techniques for gCN-based applications.

Atomically dispersed recognition unit for selective in vivo photoelectrochemical medicine detection

Continuous and long-term therapeutic monitoring of medicine molecules in biological systems will revolutionize healthcare by offering personalized pharmacokinetic reports. However, the extremely complex biological environment brings great challenges for in vivo molecule detection in living organisms. Here we introduce an in vivo photoelectrochemical biosensor following a reverse design strategy with single atoms as molecular recognition units. Atomic dispersion of Cu single atoms on TiO2-x substrate create synergistic anchoring triple-site for efficiently and selectively capturing of dual-carbonyl group and neighboring dual-hydroxyl group of tetracycline molecules. The photoelectrode is encapsulated with antibiofouling layer and implanted into the vein of living mouse to enable long-term in vivo monitoring of tetracycline in real biological environments. It is important to note that our approach was exclusively tested in male mice, and therefore, the findings may not be generalizable to female mice or other species without further research. The rationally designed biological-components-free in vivo biosensor with excellent selectivity, robustness, and stability endows possibility for enabling personalized medicine guidance through real-time feedbacking information and providing direct and authentic medicine molecular analysis.

Single-Atom Doped Fullerene (MN4-C54) as Bifunctional Catalysts for the Oxygen Reduction and Oxygen Evolution Reactions.

Development of high-performance oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) catalysts is crucial to realizing the electrolytic water cycle. C60 is an ideal substrate material for single atom catalysts (SACs) due to its unique electron-withdrawing properties and spherical structure. In this work, we screened for a novel single-atom catalyst based on C60, which anchored transition metal atoms in the C60 molecule by coordination with N atoms. Through first-principles calculations, we evaluated the stability and activity of MN4-C54 (M = Fe, Co, Ni, Cu, Rh, Ru, Pd, Ag, Pt, Ir, Au). The results indicate that CuN4-C54, which is based only on earth-abundant elements, exhibited low overpotentials of 0.46 and 0.47 V for the OER and ORR, respectively, and was considered a promising bifunctional catalyst, showing better performance than the noble-metal ones. In addition, according to the linear relationship of intermediates, we established volcano plots to describe the activity trends of the OER and ORR on MN4-C54. Finally, d-band center and crystal orbital Hamiltonian populations methods were used to explain the catalytic origin. Suitable d-band centers lead to moderate adsorption strength, further leading to good catalytic performances.

Catalytic performance of a single atom Pd1Ag10/Al2O3 catalyst for the selective hydrogenation of acetylene: The role of CO-induced segregation

The single-atom Pd catalysts based on silver-rich bimetallic compositions are known for their extremely high ethylene selectivity in the acetylene hydrogenation reaction; however, their activity is noticeably lower than that of traditional monometallic Pd catalysts. The aim of the work was to apply a method of CO-induced segregation to increase the concentration of single atom Pd1 sites on the surface of Pd1Ag10/Al2O3 catalyst without noticeable formation of multiatomic Pdn (n ≥ 2) ensembles. It has been experimentally established by DRIFTS-CO and XPS methods that the effect of 30 vol% CO exposure temperature on the increase of surface Pd1 sites concentration in the range of 50 to 350 °C has a volcano-like dependence with a maximum at ∼ 200–250 °C. The catalytic tests show a considerable enhancement in activity for samples treated in CO at 200–250 °C (the temperature of 100 % acetylene conversion is reduced by ∼ 30 °C), while the C2H4 selectivity was similar for both freshly reduced and CO-treated catalysts. These results demonstrate the use of CO-induced segregation as a promising method for the controlled increase in the concentration of isolated Pd1 sites to improve the activity of silver-rich palladium catalyst without compromising its selectivity.

Deciphering the Nitrogen Activation Mechanisms on Group VIII Single Atoms at MoS2.

The activation of nitrogen (N2) is vital for sustainable ammonia production and nitrogen fixation technologies. This study employs density functional theory (DFT) to investigate the nitrogen activation and reduction capabilities of Group VIII single-atom catalysts anchored on MoS2. Among these, osmium anchored on MoS2 (Os@MoS2) emerged as the most promising catalyst, exhibiting the highest N2 activation and the lowest nitrogen reduction reaction (NRR) overpotential (0.624 V). A pronounced "electron drift" effect was observed for Os@MoS2, leading to significant charge redistribution that weakens the N ≡ N triple bond, facilitating its activation. The N-N dissociation energy barrier at the *N-NH2 intermediate was calculated to be only 0.82 eV, confirming Os@MoS2's superior catalytic efficiency. Detailed analyses, including electrostatic potential maps, electron localization functions, spin density, and charge transfer, revealed the pivotal role of orbital interactions in driving N2 activation. Interestingly, the trends in adsorbed N2 bond energies and NRR overpotentials showed a consistent diagonal pattern across the Group VIII catalysts, emphasizing the importance of electronic and geometric factors. This work offers valuable insights into nitrogen activation mechanisms and provides a framework for designing efficient catalysts, highlighting Os@MoS2's potential in sustainable ammonia synthesis.

In-Situ Anchoring of Co Single-Atom Synergistically with Cd Vacancy of Cadmium Sulfide for Boosting Asymmetric Charge Distribution and Photocatalytic Hydrogen Evolution.

In the context of reshaping the energy pattern, designing and synthesizing high-performance noble metal-free photocatalysts with ultra-high atomic utilization for hydrogen evolution reaction (HER) still remains achallenge. In a streamlined synthesis process, in-situ single atom anchoring is performed in parallel with HER by irradiating a precursory defect-state CdS/Co suspension (Co-DCdS-Ss) system under simulated sunlight and the in-situ synthesizing single-atom Co photocatalyst (Co5:DCdS) exhibits further improved catalytic performance (60.10 mmolg-1h-1) compared with Co-DCdS-Ss (18.09 mmolg-1h-1), reaching an apparent quantum yield of 57.6% at 500nm and a solar-chemical energy conversion efficiency (SCC) of 6.26% at AM 1.5G. In-depth characterization tests and density functional theory (DFT) calculations prove that the anchoring of Co single atom deepens the asymmetric charge distribution of the two-coordination S atom adjacent to the cadmium vacancy (VCd). The synergy between electron delocalization VCd and Co single atom on the catalyst surface is constructed, which bifunctional sites responsible for boosting water adsorption-dissociation and hydrogen evolution. This study advances the understanding of the underlying mechanisms of synergy between surface defects and metal single atoms and opens a new horizon for the development of advanced materials in the field of photocatalysis.

Single-atom Ru modified flake g-C3N4 enhances photogenerated electron transport for rapid degradation of tetracycline antibiotics: Non-radical mechanism and ecotoxicity studies

Design of green and low-cost single-atom catalysts (SACs) with high-performance is key to moving photocatalytic degradation of antibiotics toward applications. In order to achieve SACs for large-scale manufacturing, we prepared ultrathin flake carbon nitride (FCN) by low-energy-consuming physical knockout means, and also applied an in situ growth strategy with stable and easy-operating effect to anchor the Ru element on FCN in the form of single atom. Notably, in the PMS/Vis/0.5Ru-FCN system, the degradation rate of tetracycline achieved 100 % in just five minutes, with an apparent rate constant of 0.236 min−1. Ru-FCN exhibits selective and stable determination due to narrow bandgap, unique photoresponsivity and low photogenerated carrier complexation rate. Mechanism investigation reveal that Ru-N4 sites accelerated the electron transfer between Ru-FCN and PMS, while the low oxidation state of Ru elements reduced the risk for metal corrosion. DFT calculations predict the attack sites of reactive oxygen species. This work provides a rational explanation for the charge transfer and resistance to external disturbance by Ru single atom, and it also provides a new direction to enhance the efficiency of water treatment.

Mesoporous carbon spheres modified with atomically dispersed iron sites for efficient electromagnetic wave absorption

Carbon materials have obtained some achievements in electromagnetic wave (EMW) absorption owing to their excellent electrical conductivity and low density. However, poor impedance matching and high electrical conductivity limit their EMW absorption properties. Metal single atoms absorbers have garnered considerable attention in EMW absorption, largely due to the high metal availability and special coordination structure, but the modulation of the EMW absorption properties still needs to be improved. Herein, atomically dispersed Fe sites embedded into the N-doped mesoporous carbon spheres (Fe–SAs/NC) were synthesized through a facile coordination-assisted polymerization assembly strategy without acid leaching treatment. Benefitting from abundant mesoporous structure, the Fe–SAs/NC displays large specific surface area (339 m2 g−1) and optimized impedance matching, which results in an effective reduction of the absorber density. The homogeneously dispersed Fe single atoms (Fe–SAs) on the carbon skeleton lead to the improvement in conduction and dipole polarization losses of Fe–SAs/NC, which endows Fe–SAs/NC with exceptional EMW absorption properties. Experimental results indicate that Fe–SAs/NC displays desirable EMW absorption properties with the minimal reflection loss of −52.5 dB at 2.8 mm and the effective absorption bandwidth of 4.8 GHz. The study provides valuable insights for the development of carbon materials modified with atomically dispersed metal sites to achieve high-efficient EMW absorbers.

Influence of non-metals doping on the structural, electronic, optical, and photocatalytic properties of rutile TiO2 based on density functional theory computations

This study investigates the influence of non-metal doping (C, F, N, and S) on the structural, electronic, and optical properties of rutile TiO2 using Hubbard-corrected density functional theory (DFT) within the Quantum ESPRESSO code. Rutile TiO2 is a promising material for environmental remediation and renewable energy applications. However, it has a large bandgap of 3.03 eV, which confines its use to UV light. By substituting oxygen atoms with a single dopant atom, we aim to shift the absorption edge toward the visible spectrum. Our findings reveal that doping with C, N, and S results in a redshift of the bandgap, while F doping does not exhibit this effect. The imaginary part of the dielectric function indicates shifted absorption edges for C, N, and S-doped TiO2, making them suitable for photocatalytic applications. Additionally, an increased refractive index after doping suggests the presence of excess charge carriers that affect light propagation. This work provides valuable insights for experimentalists exploring non-metal doping influences on rutile TiO2 for photocatalysis.

Indium Single Atoms Supported on S-Scheme Cu3P/TiO2 as a Photocatalyst for Hydrogen Production

Indium Single Atoms Supported on S-Scheme Cu₃P/TiO₂ as a Photocatalyst for Hydrogen Production

Iron Oxide Clusters as Electron Donors Under Light Enhance Oxygen Reduction Kinetics at Atomically Dispersed Fe for Photocatalytic CH4 Partial Oxidation.

Photocatalytic CH4 oxidation to CH3OH emerges as a promising strategy to sustainably utilize natural gas and mitigate the greenhouse effect. However, there remains a significant challenge for the synthesis of methanol by using O2 at low temperature. Inspired by the catalytic structure in soluble methane monooxygenase (MMO) and the corresponding reaction mechanism, we prepared a biomimetic photocatalysts with the decoration of Fe2O3 nanocluster and satellite Fe single atom immobilized on carbon nitride. The catalyst demonstrates an excellent CH3OH productivity of 5.02 mmol·gcat-1·h-1 with methanol selectivity of 98.5%. Mechanism studies reveal that the synergy between Fe2O3 nanocluster and Fe single atom establishes a dual-Fe site as MMO for O2 activation and subsequent CH4 partial oxidation. Moreover, the light excitation of Fe2O3nanoclusters with a relative narrow bandgap could deliver the electrons and protons to atomic Fe that facilitating the oxygen reduction kinetics for the robust of methanol synthesis.

Coordination dependent photocatalytic peroxymonosulfate activation on biomass derived Fe single atom catalysts for atrazine degradation

Challenges associated with uncontrollable metal coordination structures in biomass-derived single-atom catalysts (SACs) and their intricate impacts on photocatalytic peroxymonosulfate (PMS) activation pose significant hurdles for the application of photo-Fenton technology towards wastewater treatment. Herein, we employed a co-pyrolysis strategy using Enteromorpha prolifera (E. prolifera) to synthesize Fe SACs with varying Fe–NX coordination, i.e., Fe–N5 and Fe–N6. Fe–N6-based SAC achieved over 80% atrazine (ATZ) degradation in 15 min, with a degradation rate of 0.13 min−1, representing 2.6-fold improvement over SAC with Fe–N5 structure. Experimental and simulation results revealed that Fe–N6 active sites acted as electron donors, enhancing the delocalization of π-electrons and improving photocatalytic PMS activation. This SAC also exhibited high selectivity for 1O2 degradation pathway and impressive ATZ degradation in seawater, with notable chlorine resistance, underscoring its potential in environmental pollutant remediation. This work unveils the catalyst structure-photocatalytic PMS activation performance relationship, offering avenue for developing more sustainable and efficient biomass-derived SACs for wastewater treatment.

Dual Fe/I Single-Atom Electrocatalyst for High-Performance Oxygen Reduction and Wide-Temperature Quasi-Solid-State Zn-Air Batteries.

Oxygen reduction reaction (ORR) electrocatalysts are essential for widespread application of quasi-solid-state Zn-air batteries (ZABs), but the well-known Fe-N-C single-atom catalysts (SACs) suffer from low activity and stability because of unfavorable strong adsorption of oxygenated intermediates. Herein, the study synthesizes dual Fe/I single atoms anchored on N-doped carbon nanorods (Fe/I-N-CR) via a metal-organic framework (MOF)-mediated two-step tandem-pyrolysis method. Atomic-level I doping modulates the electronic structure of Fe-Nx centers via the long-range electron delocalization effect. Benefitting from the synergistic effect of dual Fe/I single-atom sites and the structural merits of 1D nanorods, the Fe/I-N-CR catalyst shows excellent ORR activity and stability, superior to Pt/C and Fe or I SACs. When the Fe/I-N-CR is employed as cathode for quasi-solid-state ZABs, a high power density of 197.9mW cm-2 and an ultralong cycling lifespan of 280h at 20mA cm-2 are both achieved, greatly exceeding those of commercial Pt/C+IrO2 (119.1mW cm-2 and 47h). In addition, wide-temperature adaptability and superior stability from -40 to 60 °C are realized for the Fe/I-N-CR-based quasi-solid-state ZABs. This work provides a MOF-mediated two-step tandem-pyrolysis strategy to engineer high-performance dual SACs with metal/nonmetal centers for ORR and sustainable ZABs.

Cu−based bimetallic sites' p-d orbital hybridization promotes CO asymmetric coupling conversion to C2 products

Hampered by sluggish C−C coupling kinetics, the low selectivity and efficiency have limited industrial applications of CO2 reduction into valuable multi-carbon products. A direct coupling of CO molecules or their coupling after hydrogenation, followed by the final synthesis of C2 products, can help to overcome these limitations potentially. In this study, a detailed high-throughput screening of bimetallic site catalysts comprising copper (Cu) and 28 other metal (M) atoms was conducted. The metal atoms Cu and M were anchored on a carbon nanotube (CNT) with six nitrogen (N6) defects (CuMN6@CNT), which possesses effective dual active sites for C−C coupling. The calculated results demonstrate that the CuGaN6@CNT catalyst exhibited favorable selectivity, with low theoretical overpotentials of −0.23 and −0.34 eV for ethanol and ethylene, respectively, surpassing most reported catalysts. The synergistic effect of Ga and Cu sites, along with their p-d states hybridization, results in an enhancement of Cu's d state dispersion and energy barriers reduction for C−C coupling. Additionally, the strain effect of the substrate CNT exhibits a direct correlation with the catalytic performance of CuGaN6@CNT by adjusting the d-band center of the Cu site and p-band center of the Ga site. These findings provide a novel insights into the electrocatalytic reduction of CO into valuable C2 products using bimetallic single atom catalyst, offering significant guidance for future research endeavors in this field.

Superior Singlet Oxygen Electrosynthesis via Neighboring Dual Molecular Oxygen Coactivation for Selective Tetracycline Detoxification

AbstractOxygen (O2) electroreduction offers a green approach for singlet oxygen (1O2) synthesis in wastewater contaminants detoxification. However, traditional single O2 activation on single‐metal catalytic sites seriously suffers from the kinetically‐unfavorable desorption of adsorbed superoxide species (•O2−*/•OOH*). Here, we demonstrate a novel dual O2 coactivation pathway on shortened Fe1−OV−Ti sites for superior 1O2 electrosynthesis through a rapid disproportionate process between surface‐confined •O2−*/•OOH*. Theoretical calculations combined with in situ electrochemical spectroscopies demonstrated that the shortened distance between Fe single atom and adjacent unsaturated Ti atom facilitates the direct recombination of surface‐confined Fe−•OOH and Ti−•OO− to yield 1O2, bypassing the formidable •O2−*/•OOH* desorption process. Impressively, Fe1−OV−Ti could realize an excellent 1O2 electrosynthesis rate of 54.5 μmol L−1 min−1 with an outstanding 1O2 selectivity of 97.6 % under neutral condition, surpassing that of Fe1−O−Ti (27.1 μmol L−1 min−1, 91.7 %). Using tetracycline (TC) as a model pollutant, the resulting Fe1−OV−Ti electrode achieved nearly 100 % degradation in 120 min at −0.6 V, meanwhile preventing the generation of toxic intermediates. This study provides a new 1O2 electrosynthesis strategy by controlling the distance of adjacent catalytic sites for the coactivation of dual molecular oxygen.

Designing C9N10 Anchored Single Mo Atom as an Efficient Electrocatalyst for Nitrogen Fixation.

Electrochemical nitrogen reduction reaction (NRR) is a promising route for realizing green and sustainable ammonia synthesis under ambient conditions. However, one of the major challenges of currently available Single-atom catalysts (SACs) is poor catalytic activity and low catalytic selectivity, which is far away from the requirements of industrial applications. Herein, first-principle calculations within the density functional theory were performed to evaluate the feasibility of a single Mo atom anchored on a g-C9N10 monolayer (Mo@g-C9N10) as NRR electrocatalysts. The results demonstrated that the gas phase N2 molecule can be sufficiently activated on Mo@g-C9N10, and N2 reduction dominantly occurs on the active Mo atom via the preferred enzymatic mechanism, with a low limiting potential of -0.48 V. In addition, Mo@g-C9N10 possesses a good prohibition ability for the competitive hydrogen evolution reaction. More impressively, good electronic conductivity and high electron transport efficiency endow Mo SACs with excellent activity for electrocatalytic N2 reduction. This theoretical research not only accelerates the development of NRR electrocatalysts but also increases our insights into optimizing the catalytic performance of SACs.

Apparatus for producing single strontium atoms in an optical tweezer array

Abstract We outline an experimental setup for efficiently preparing a tweezer array of $^{88}$Sr atoms. Our setup uses permanent magnets to maintain a steady-state two-dimensional magneto-optical trap (MOT) which results in a loading rate of up to $10^{8}$ s$^{-1}$ at 5 mK for the three-dimensional blue MOT. This enables us to trap $2\times10^{6}$ $^{88}$Sr atoms at 2 $\mu$K in a narrow-line red MOT with the $^{1}$S$_{0}$ $\rightarrow$ $^{3}$P$_{1}$ intercombination transition at 689 nm. With the Sisyphus cooling and pairwise loss processes, single atoms are trapped and imaged in 813 nm optical tweezers, exhibiting a lifetime of 2.5 minutes. We further investigate the survival fraction of a single atom in the tweezers and characterize the optical tweezer array using a release and recapture technique. Our experimental setup serves as an excellent reference for those engaged in experiments involving optical tweezer arrays, cold atom systems, and similar research.