Silicon Photomultipliers Research Articles

Experimental study of plastic scintillators array for compact fast neutron-gamma dual-modality imaging system

In a compact multi-radiation imaging system, the substitution of traditional charge-coupled devices with a plastic scintillators array coupled with silicon photomultiplier detectors significantly enhances the radiation tolerance of the detection and imaging module, thereby reducing the system footprint. We present a detailed structure of a compact fast neutron/gamma-ray dual-modality imaging system based on a plastic scintillators array and evaluate its performance in imaging various samples. The detector array consists of nine 14.7 × 14.7 × 100 mm3 EJ-276 plastic scintillators coupled with corresponding silicon photomultiplier units, arranged in a 3 × 3 grid. The usage of EJ-276 plastic scintillators allows for discrimination between neutron and gamma signals through pulse shape discrimination techniques, enabling data separation between neutrons and gamma rays. In this paper, we present the experimental procedure and results of fast neutron-gamma imaging for objects containing aluminum and polyethylene materials. Fast neutrons and gammas are delivered by an Cf-252 source. The experimental results demonstrate that the system achieves dual-modality grayscale imaging and has resolution for sample thickness. Reconstructed image contrast allows qualitative differentiation of sample materials, especially detecting low-Z materials encapsulated by high-Z materials.

SiPM joint likelihood reception for mobile LED-optical communication under pointing errors.

Light-emitting diode (LED)-optical communication is a novel spectrum communication with wide field of view (FOV), light weight, and long-distance free-space capabilities. Due to atmospheric turbulence attenuation and pointing errors caused by long-distance communication, this Letter proposes a multi-pixel channel joint maximum likelihood (JML) reception method using a highly sensitive silicon photomultiplier (SiPM). To evaluate the performance of the SiPM under mobile terminal jittering communication, we analyze the effect of optical transmitting power, pointing errors, and signal-to-noise ratio (SNR) gain on optical communication by comparing JML with signal channel using the maximum likelihood (ML) algorithm. Both simulation analysis and experimental results demonstrate that the proposed JML algorithm to process signals received from SiPM multi-pixel channels can effectively mitigate the impact of pointing errors on the bit error rate (BER) of optical communications by two orders of magnitude at large jitter radians and SNR.

Exploring crucial technological advancements in Anger-Camera neutron detectors for single crystal neutron diffraction

In accordance with the second phase construction blueprint for the China Spallation Neutron Source (CSNS-II), the proposal includes the establishment of a single crystal neutron diffractometer. This apparatus necessitates a neutron detector array spanning over 1 m2 and capable of covering neutron diffraction angles from 20° to 160°. Additionally, the detector's position resolution must better than 1 mm × 1 mm. To meet such requirements, a scintillator neutron detector based on the Anger-Camera principle was designed. The detector is composed of a 6LiF/ZnS (Ag) scintillation screen, optical guide, silicon photomultipliers (SiPMs) array and self-design composite compression readout electronic systems. A detector prototype, featuring a detection area of 50 mm × 50 mm, was fabricated and subjected to testing at the BL20 neutron test line in the China Spallation Neutron Source (CSNS). The detector system achieved an optimal position resolution of 0.6 mm, while the maximum count rate was approximately 20 kHz. Moreover, the detector's Bragg edge imaging capability was preliminarily investigated using stainless steel samples, demonstrating its future potential for Bragg edge transmission imaging. The proposed detector demonstrates promising potential as a candidate for the single crystal diffractometer in CSNS-II.

Quantitative analysis of silicon photomultipliers for thermoluminescence measurement

The employment of silicon photomultipliers (SiPMs) in photon detection systems facilitates the reduction of detection module size, enhances portability and ruggedness, and lowers product costs. This study investigated the potential of SiPM in thermoluminescence (TL) measurements, focusing on its detection limits, temperature dependency, and dose responses. A 3 × 3 mm2 multi-pixel photon counter (MPPC, Hamamatsu MPPC) composed of 50 μm single-photon avalanche diodes (SPADs) was utilized in single-photon counting mode as the detector. This experimental setup was compared with a conventional photomultiplier tube (PMT) in TL readout case. To ensure comparable light exposure between the two detectors, a 3-mm diameter pinhole was positioned in front of the PMT. By using a thermoelectric (TE) cooling module to maintain the sensor temperature at −20 °C, signal reproducibility was achieved with a fluctuation of less than 1.2%, and a detection limit ranging from 30 to 300 μGy was assessed for four dosimeters: LiF:Mg,Ti, LiF:Mg,Cu,P, LiF:Mg,Cu,Si, and Al2O3:C. The dose response of the system was limited by significant signal saturation due to pile-up effects. We introduced a correction model with a 50 ns paralyzable deadtime, which enhanced the signal response by more than 20-fold. Furthermore, this model also correlated well with the observed count rates under high dark count rate (DCR) conditions up to 1.67 MHz. The findings from this study further contributes to the discussion regarding the perspective of SiPM as TL detectors.

Self-calibration method for LaBr3 coupled with SiPM detector based on internal radiation of 138La

Gamma detectors consisting of lanthanum bromide (LaBr3) scintillator and silicon photomultiplier (SiPM) have extensive applications in various scientific fields. Accurate gamma energy measurement depends on accurate calibration of these detectors. While some studies have attempted detector self-calibration based on the natural background of LaBr3, these methods are limited to specific LaBr3 crystals and lack generality. To address this limitation, this paper proposes a self-calibration method that solely utilizes the natural radioactivity of 138La. By solving for the maximum similarity between the test background from measurement and the standard spectrum obtained from the Geant4 simulation, the detector is effectively calibrated. Furthermore, the application of a series of energy spectrum processing algorithms simplifies the solution complexity of the maximum similarity problem. Experimental results from four different crystals at varying temperatures demonstrate calibration errors of less than 0.8% at 662 keV, highlighting the method's broad applicability and accuracy. Besides, the influence of the background measurement time and the natural environmental background on the self-calibration method are discussed in detail, further illustrating the value of the application.

A compact and highly integrated 128-channel FPGA-based readout electronics for nuclear imaging application

As silicon photomultiplier (SiPM) technology develops, its possible applications are being growingly expanded. However, the current technical obstacle is the signal readout from large-scale, multi-pixel SiPMs, especially in a large nuclear imaging device. Although the application-specific integrated circuits (ASICs) provide ways to reach that goal, it needs a long period with iterative electronic process and a very high cost. We developed a high-integrated positron emission tomography (PET) electronics system with field programmable gate array based charge-to-digital converter (FPGA-QDC) technology instead of the ASICs. Unlike traditional FPGA-based charge readout method in which low-voltage differential signaling (LVDS) receivers serve as analog voltage comparators, in the proposed electronics system voltage-referenced receivers work as analog comparators.Theoretically, nearly all of input/output (I/O) ports in the FPGA can achieve the function of analog comparators using voltage-referenced I/O standard. The electronics system is constructed using off-the-shelf low-cost commercial components. Therefore, it is feasible to fast build a distributed readout system with multiple such electronics system. The flexibility and reconfigurability of the FPGA provide multi-channel grouping and diverse triggering for different kinds of detector configurations, such as row/column summation and resistor-based readout. These features are greatly sought after in readout electronics for the SiPM-based radiation detectors. Experimental results show that the proposed highly-integrated electronics system overcomes the bottleneck that has limited the development of advanced PET detectors and scanners.

Novel method to study saturation of silicon photomultiplier in scintillation detector

Signal saturation in the Silicon PhotoMultiplier (SiPM) often causes a serious problem in using a detector equipped with SiPMs for scintillator readout. Conventionally, SiPM signal saturation is measured through direct injection of visible light pulses to the SiPM. However, the method works poorly with the scintillation detector because the effects of the time constant of the emission of scintillation light are not included. Here, we present a novel method to measure the precise degree of SiPM signal saturation in scintillation detectors. The key difference from the conventional method is to use UV light pulses, as opposed to visible light ones, to inject and excite scintillation light in the detector. It allows us to directly measure the degree of saturation in situ taking into account all the major effects in the detector, such as the time constant of the scintillation emission. We also develop a new model for SiPM signal saturation and validate it with the measured degree of saturation with the above-mentioned new method.

Experimental characterization of discrimination capabilities of EJ-276 and EJ-276G read by SiPM by pulse-shape analysis techniques

This work aims at the investigation of the Pulse Shape Discrimination (PSD) capabilities of two very compact detection systems composed of a 3x3x3 cm3 EJ 276 and a 3x3x3 cm3 EJ 276G (the latter green shifted version) plastic scintillators, both coupled to Silicon Photomultiplier (SiPM). The studied systems are supposed to be the basic elementary cell of a new multi-detector for simultaneous detection of neutrons and light charged particles called NArCoS (Neutron Array for Correlation Studies) having both high angular and energy resolution. In this perspective, the results of the experimental qualification of two prototypes with gamma and alpha radioactive sources and in beam tests are reported, in order to characterize the optimum choice for the new device.

Quasi-analog operation for low photon flux detection with SiPM's standard and fast outputs

In this paper, we characterize the quasi-analog detection performance of silicon photomultiplier (SiPM) photodetector for optical wireless communications (OWC) at low photon flux signal intensity. In addition to analyzing the specificities of conventional anode-cathode standard output, it also highlights the unique capacitively coupled fast output feature of the off-the-shelf SiPM devices introduced by SensL, now ON Semiconductor (onsemi). Furthermore, the potential advantages of fast output are analyzed, and first propose the combined output model of standard and fast outputs. This combined output can be used to suppress ambient noise utilizing the bipolar characteristics of the fast output amplitude, e.g., the amplitude of the fast output can be up to ±30 mV under a useful signal light intensity of 94.1 nW, which can suppress the ambient noise amplitude of 30 mV and effectively improves signal-to-noise ratio. In addition, an approximate linear quantitative relationship between the standard output voltage amplitude and the SiPM chip received incident optical power was obtained, e.g., at different intensities of dark current and ambient current (1 nA and 2 nA), standard output voltage amplitudes of 90 mV and 50 mV correspond to optical powers of 50.5 nW and 21.3 nW or 34.7 nW and 5.7 nW. Finally, the potential performance of the proposed combined output schemes is confirmed by experimental and the measured Q-factor of the eye diagrams was optimised from 13.03 to 15.08. The proposed onsemi SiPM combined output schemes of standard and fast outputs can be selected to detection analog low-light link.

Developing mini 4[formula omitted] coincidence counter for measuring activity

For measuring activity of radionuclides produced in High-flux Advanced Neutron Application Reactor (HANARO) at the Korea Atomic Energy Research Institute (KAERI), a small size 4πβ–γ coincidence counter was developed. This counter comprises a liquid scintillator for detecting beta-ray and NaI crystal for detecting gamma-ray, each coupled to SiPMs (silicon photomultipliers) that do not require high-voltage devices. The performance of the newly developed detector was validated using 134Cs and 177Lu reference materials.

LURAD: Design study of a comprehensive radiation monitor package for the gateway and the lunar surface

Moon is an auspicious environment for the study of Galactic cosmic rays (GCR) and Solar Particle Events (SEP) due to the absence of magnetic field and atmosphere. The same characteristics raise the radiation risk for human presence in orbit around it or at the lunar surface. The secondary (albedo) radiation resulting from the interaction of the primary radiation with the lunar soil adds an extra risk factor, because neutrons are produced, but also it can be exploited to study the soil composition. In this paper, the design of a comprehensive radiation monitor package tailored to the lunar environment is presented. The detector, named LURAD, will perform spectroscopic measurements of protons, electrons, heavy ions, as well as gamma-rays, and neutrons. A microdosimetry monitor subsystem is foreseen which can provide measurements of LET(Si) spectra in a wide dynamic range of LET(Si) and flux for SPE and GCR, detection of neutrons and biological dose for radiation protection of astronauts. The LURAD design leverages on the following key enabling technologies: (a) Fully depleted Si monolithic active pixel sensors; (b) Scintillators read by silicon photomultipliers (SiPM); (c) Silicon on Insulator (SOI) microdosimetry sensors; These technologies promise miniaturization and mass reduction with state-of-the-art performance. The instrument’s design is presented, and the Monte Carlo study of the feasibility of particle identification and kinetic energy determination is discussed.

Arduino-Based Readout Electronics for Nuclear and Particle Physics.

Open Hardware-based microcontrollers, especially the Arduino platform, have become a comparably easy-to-use tool for rapid prototyping and implementing creative solutions. Such devices in combination with dedicated front-end electronics can offer low-cost alternatives for student projects, slow control and independently operating small-scale instrumentation. The capabilities can be extended to data taking and signal analysis at mid-level rates. Two detector realizations are presented, which cover the readouts of proportional counter tubes and of scintillators or wavelength-shifting fibers with silicon photomultipliers (SiPMs). The SiPMTrigger realizes a small-scale design for coincidence readout of SiPMs as a trigger or veto detector. It consists of a custom mixed signal front-end board featuring signal amplification, discrimination and a coincidence unit for rates of up to 200 kHz. The nCatcher transforms an Arduino Nano to a proportional counter readout with pulse shape analysis: time over threshold measurement and a 10-bit analog-to-digital converter for pulse heights. The device is suitable for low-to-medium-rate environments up to 5 kHz, where a good signal-to-noise ratio is crucial. We showcase the monitoring of thermal neutrons. For data taking and slow control, a logger board is presented that features an SD card and GSM/LoRa interface.

Dual threshold input receiver FPGA-only signal digitization method for time-of-flight positron emission tomography

As silicon photomultiplier (SiPM)-based time-of-flight (TOF) positron emission tomography (PET) becomes popular, the need for sophisticated PET data acquisition (DAQ) systems is increasing. One promising solution to this challenge is the adoption of a field-programmable gate array (FPGA)-only signal digitization method. In this paper, we propose a new approach to efficiently implement an FPGA-only digitizer. We configured the input/output (IO) port of the FPGA to function as a dual-threshold voltage comparator through the use of simple passive circuitry and heterogeneous IO standards. This configuration overcomes the limitations of existing methods by allowing different threshold voltages for adjacent IO pins, effectively reducing routing complexity and lowering manufacturing costs. An FPGA-only digitizer was implemented by integrating the dual-threshold voltage comparator and FPGA-based time-to-digital converter. By combining the dual-threshold time-over-threshold (TOT) method and curve fitting, precise energy information could be obtained. The performance of the FPGA-only digitizer was assessed using a detector setup comprising a 3 × 3 × 20 mm3 LYSO scintillation crystal and a single pixel SiPM. Using the configured evaluation setup, an energy resolution of 12.5% and a time resolution of 146 ± 9 ps were achieved for a 20 mm scintillation crystal. The dual-threshold TOT implemented using the proposed method showed consistent linearity across an energy range of 100 keV to 600 keV. The proposed method is well-suited for the development of cost-effective DAQ systems in highly integrated TOF PET systems.

Performance of the mass testing setup for arrays of silicon photomultipliers in the TAO experiment.

Modern neutrino physics detectors often employ thousands, and sometimes even hundreds of thousands, of Silicon Photomultipliers (SiPMs). The TAO experiment [1] is a notable example that utilizes a spherical scintillator barrel with a diameter of 1.8 meters, housing approximately 130,000 SiPMs organized into 4,100 tiles. Each tile with size of 5×5 cm2 consists of a 32-SiPM array functioning as a single detector unit. To achieve an unparalleled energy resolution of 2% at 1 MeV within this volume, the SiPMs must possess cutting-edge parameters, including a photon detection efficiency (PDE) exceeding 50%, cross-talk of approximately 10%, and an extremely low dark count rate (DCR) below 50 Hz/mm2. Maintaining the setup at a negative temperature of -50°C is necessary to achieve the desired DCR. This article presents the setup and methods employed to individually characterize the mass of SiPMs across all 4,100 tiles at the specified negative temperature.

DarkSide-20k Veto Photon-Detector Units: construction and characterization

DarkSide-20k is a global direct dark matter search experiment situated underground at LNGS (Italy), designed to reach a total exposure of 200 tonne-years nearly free from instrumental backgrounds. The core of the detector is a dual-phase Time Projection Chamber (TPC) filled with 50 tonne of low-radioactivity liquid argon.The entire TPC wall is surrounded by a gadolinium-loaded polymethylmethacrylate (Gd-PMMA), which acts as a neutron veto, immersed in a second low-radioactivity liquid argon bath enclosed in a stainless steel vessel. The neutron veto is equipped with large-area Silicon PhotoMultiplier (SiPM) array detectors, placed on the outside of the TPC wall. SiPMs are arranged in a compact design meant to minimize the material used for PCBs, cables and connectors: the so-called Veto Photon-Detector Units (vPDUs).A vPDU comprises 16 vTiles, each containing 24 SIPMs, together with front-end electronics, and amotherboard, which distributes voltage and control signals, sums vTiles channels, and drives theelectrical signal transmission. The neutron veto will be equipped with 120 vPDUs. The paper willfocus on the production of the first vPDUs, describing the assembly chain in the U.K. institutes, inorder to underline the rigorous QA/QC procedures, up to the final characterization of the firstcompleted prototypes. Tests will be extensively performed in liquid nitrogen baths either for thesingle vTiles and for the assembled vPDUs, with the purpose of assigning a “quality passport” toeach component.

Study of the thermal neutron activation of a gamma-ray detector for BNCT dose monitoring

We present a study on the neutron activation of a gamma-ray detector for a BNCT-SPECT dose imaging system. The detector is based on a LaBr3(Ce+Sr) scintillator crystal, coupled with a matrix of Silicon Photomultipliers (SiPMs), read by a dedicated electronics system. This detector has successfully demonstrated to be capable to identify the 10B compounds when irradiating borated vials with thermal neutrons. However, a background signal around 478 keV was detected, suggesting the activation of the detector itself. This study aims to determine the origin of this background signal by simulating the two main parts of the detector, which are the crystal and electronic boards, in order to assess their contribution to the background signal. The results of the FLUKA simulations show that the neutron capture reactions on both the crystal and electronic boards cause a relevant background nearby the BNCT signal, thereby limiting the detector's sensitivity. To address this issue, a customized cadmium shielding has been developed. This solution was tested at the TRIGA Mark II research nuclear reactor of Pavia University, where experimental measurements and corresponding FLUKA simulations proved its effectiveness.

Performance of a first full-size WOM-based liquid scintillator detector cell as prototype for the SHiP Surrounding Background Tagger

As a prototype detector for the SHiP Surrounding Background Tagger (SBT), we constructed a cell (120 cm × 80 cm × 25 cm) made from corten steel that is filled with liquid scintillator (LS) composed of linear alkylbenzene (LAB) and 2,5-diphenyloxazole (PPO). The detector is equipped with two Wavelength-shifting Optical Modules (WOMs) for light collection of the primary scintillation photons. Each WOM consists of an acrylic tube that is dip-coated with a wavelength-shifting layer on its surface. Via internal total reflection, the secondary photons emitted by the molecules of the wavelength shifter are guided to a ring-shaped array of 40 silicon photomultipliers (SiPMs) coupled to the WOM for light detection. The granularity of these SiPM arrays provides an innovative method to gain spatial information on the particle crossing point. Several improvements in the detector design significantly increased the light yield with respect to earlier proof-of-principle detectors. We report on the performance of this prototype detector during an exposure to high-energy positrons at the DESY II test beam facility by measuring the collected integrated yield and the signal time-of-arrival in each of the SiPM arrays. The resulting detection efficiency and reconstructed energy deposition of the incident positrons are presented, as well as the spatial and time resolution of the detector. These results are then compared to Monte Carlo simulations.

Depth-encoding using optical photon TOF in a prism-PET detector with tapered crystals.

High-resolution brain positron emission tomography (PET) scanner is emerging as a significant and transformative non-invasive neuroimaging tool to advance neuroscience research as well as improve diagnosis and treatment in neurology and psychiatry. Time-of-flight (TOF) and depth-of-interaction (DOI) information provide markedly higher PET imaging performance by increasing image signal-to-noise ratio and mitigating spatial resolution degradation due to parallax error, respectively. PET detector modules that utilize light sharing can inherently carry DOI information from the multiple timestamps that are generated per gamma event. The difference between two timestamps that are triggered by scintillation photons traveling in opposite directions signifies the event's depth-dependent optical photon TOF (oTOF). However, light leak at the crystal-readout interface substantially degrades the resolution of this oTOF-based depthencoding. We demonstrate the feasibility of oTOF-based depth encoding by mitigating light leak in single-ended-readout Prism-PET detector modules using tapered crystals. Minimizing light leak also improved both energy-based DOI and coincidence timingresolutions. The tapered Prism-PET module consists of a 16 16 array of 1.5 1.5 20 lutetium yttrium oxyorthosillicate (LYSO) crystals, which are tapered down to 1.2 1.2 at the crystal-readout interface. The LYSO array couples 4-to-1 to an 8 8 array of 3 3 silicon photomultiplier (SiPM) pixels on the tapered end and to a segmented prismatoid light guide array on the opposite end. Performance of tapered and non-tapered Prism-PET detectors was experimentally characterized and evaluated by measuring flood histogram, energy resolution, energy-, and oTOF-based DOI resolutions, and coincidence timing resolution. Sensitivities of scanners using different Prism-PET detector designs were simulated using Geant4 application for tomographic emission (GATE). For the tapered (non-tapered) Prism-PET module, the measured full width at half maximum (FWHM) energy, timing, energy-based DOI, and oTOF-based DOI resolutions were 8.88 (11.18)%, 243 (286)ps, 2.35 (3.18)mm, and 5.42 (13.87)mm, respectively. The scanner sensitivities using non-tapered and tapered crystals, and 10 rings of detector modules, were simulated to be 30.9 and 29.5kcps/MBq,respectively. The tapered Prism-PET module with minimized light leak enabled the first experimental report of oTOF-based depth encoding at the detector module level. It also enabled the utilization of thinner (i.e., 0.1mm) inter-crystal spacing with barium sulfate as the reflector while also improving energy-based DOI and timingresolutions.

Comparing various AI approaches to traditional quantitative assessment of the myocardial perfusion in [82Rb] PET for MACE prediction

Assessing the individual risk of Major Adverse Cardiac Events (MACE) is of major importance as cardiovascular diseases remain the leading cause of death worldwide. Quantitative Myocardial Perfusion Imaging (MPI) parameters such as stress Myocardial Blood Flow (sMBF) or Myocardial Flow Reserve (MFR) constitutes the gold standard for prognosis assessment. We propose a systematic investigation of the value of Artificial Intelligence (AI) to leverage [82\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$^{82}$$\\end{document}Rb] Silicon PhotoMultiplier (SiPM) PET MPI for MACE prediction. We establish a general pipeline for AI model validation to assess and compare the performance of global (i.e. average of the entire MPI signal), regional (17 segments), radiomics and Convolutional Neural Network (CNN) models leveraging various MPI signals on a dataset of 234 patients. Results showed that all regional AI models significantly outperformed the global model (p<0.001\\documentclass[12pt]{minimal} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{upgreek} \\setlength{\\oddsidemargin}{-69pt} \\begin{document}$$p<0.001$$\\end{document}), where the best AUC of 73.9% (CI 72.5–75.3) was obtained with a CNN model. A regional AI model based on MBF averages from 17 segments fed to a Logistic Regression (LR) constituted an excellent trade-off between model simplicity and performance, achieving an AUC of 73.4% (CI 72.3–74.7). A radiomics model based on intensity features revealed that the global average was the least important feature when compared to other aggregations of the MPI signal over the myocardium. We conclude that AI models can allow better personalized prognosis assessment for MACE.

Modelization of extended axial field-of-view PET scanners to analyze the performance improvement

Positron Emission Tomography (PET) offers non-invasive insights into physiological processes. However, in clinical practice conventional PET scanners face limitations in comprehensive imaging due to their restricted axial field of view (FOV).This study explores the benefits and challenges of extending PET scanner AFOV using Monte Carlo simulation with GATE 9.1. The Biograph Vision Quadra scanner is a novel system based on the Digital Biograph Vision 600 scanner. Both devices use silicon photomultipliers and 3.2 x 3.2 × 20 mm Lutetium Oxyorthosilicate crystals (LSO). However, the 32 detector rings of the Quadra scanner enable a four-fold expansion in the Axial Field Of View (FOV) compared to Vision. As a result, higher sensitivity, and an enhancement of noise equivalent count rate and image quality are achieved. The purpose of this study is to analyze the effect of increasing the number of detector rings and the axial FOV on the scanner performance. To accomplish this, four different geometries are modeled using GATE (GEANT4 Application for Tomographic Emission). Based on the Biograph Vision 600 model, the length and the number of detector rings are gradually extended to reach the length of the Quadra scanner. Thus, four geometries with 8 (25.6 cm), 16 (51.2 cm), 24 (76.8 cm) and 32 (102.4 cm) detector rings are simulated, keeping the crystal configuration and the dimensions in the transaxial plane. The study evaluates sensitivity, Noise Equivalent Count Rate (NECR), and image quality parameters. Results indicate a significant increase in sensitivity and NECR with FOV extension, underscoring enhanced performance. However, artifact occurrence, particularly concentric circular patterns and background homogeneity changes, accentuates with extended AFOV. Normalization algorithms, particularly component-based normalization, mitigate these artifacts. This study contributes to the understanding of the advantages and limitations of extending PET scanner AFOV, offering insights into the effectiveness of component-based normalization for improving PET image quality.