Silica Hydride-based Stationary Phases Research Articles

Silica Hydride: A Separation Material Every Analyst Should Know About

This review describes the development, special features and applications of silica hydride-based stationary phases for HPLC. The unique surface of this material is in contrast to ordinary, standard silica, which is the material most frequently used in modern HPLC stationary phases. The standard silica surface contains mainly silanol (Si-OH) groups, while the silica hydride surface is instead composed of silicon-hydrogen groups, which is much more stable, less reactive and delivers different chromatographic and chemical characteristics. Other aspects of this material are described for each of the different bonded moieties available commercially. Some applications for each of these column types are also presented as well as a generic model for method development on silica hydride-based stationary phases.

The Development of Silica Hydride Stationary Phases for High-Performance Liquid Chromatography from Conception to Commercialization

The development of a stationary phase material for high-performance liquid chromatography based on a surface of silica hydride as opposed to silanols on ordinary silica is discussed including synthetic approaches, characterization, and applications. There are several synthetic approaches available to create a silica hydride surface. Modification of the Si–H moiety on the silica surface can be accomplished through the use of a hydrosilation reaction. Both the intermediate silica hydride and the material modified with an organic moiety can be characterized by a number of spectroscopic as well as a variety of other methods. Further insights into the retention mechanism are provided through chromatographic measurements. The ultimate utility of any chromatographic stationary phase material is determined by its success in solving challenging analytical problems. A broad range of applications is reviewed to illustrate the versatility and usefulness of silica hydride-based stationary phases.

Studies on the Extraction of Several Polyphenols with Different Silica Hydride Stationary Phases

The solid-phase extraction of several polyphenolic compounds with different silica hydride-based stationary phases, as well as an unmodified type-B silica, has been investigated. In particular, the propensities of these stationary phases to extract the selected polyphenolic compounds in the batch-binding mode in the presence of 100% methanol or 50% (v/v) aqueous/methanol solvents have been examined. In addition, the zeta-potential values of these different sorbents have been determined in the same solvent compositions. The results indicated that the batch-extraction behaviour of these polyphenolic compounds with the type-B silica, unmodified silica hydride, the Diamond Hydride™ particles, silica hydride particles modified with immobilized phenyl groups or with other non-polar ligands of larger steric size, such as bidentate octyl, bidentate octadecyl, or cholesteryl groups, did not overall correlate with the particle’s zeta-potential values. However, these results indicated that the selectivity attributes in solid-phase extraction procedures of different types of silica hydride materials with polyphenolic compounds can be differentiated from experimental data acquired with small quantities of structurally related test analytes under aqueous normal-phase conditions solely from physical measurement methods, such as static batch-extraction measurements and associated GS–qMS methods of analysis.

Evaluation of the dual retention properties of stationary phases based on silica hydride: Perfluorinated bonded material.

The synthesis of a new perfluorinated stationary phase based on silica hydride using a hydrosilation reaction was investigated. The material was characterized by elemental analysis, diffuse reflectance infrared Fourier transform spectroscopy and (13) C cross-polarization magic-angle spinning NMR spectroscopy. The retention properties of this new material were tested in the reversed-phase and normal-phase mode. Variable buffer strength experiments at two pH conditions for selected polar compounds were used to compare the new phase to hydrophilic interaction liquid chromatography retention. These results and previous data reported in the literature were used to postulate differences in the retention mechanism between hydrophilic interaction liquid chromatography and silica hydride-based stationary phases.

Analysis of Capsaicinoids in Hot Sauces Using a Silica Hydride-Based Stationary Phase

Analysis of Capsaicinoids in Hot Sauces Using a Silica Hydride-Based Stationary Phase

Ammonium fluoride as a mobile phase additive in aqueous normal phase chromatography

The use of ammonium fluoride as a mobile phase additive in aqueous normal phase chromatography with silica hydride-based stationary phases and mass spectrometry detection is evaluated. Retention times, peak shape, efficiency and peak intensity are compared to the more standard additives formic acid and ammonium formate. The test solutes were NAD, 3-hydroxyglutaric acid, α-ketoglutaric acid, p-aminohippuric acid, AMP, ATP, aconitic acid, threonine, N-acetyl carnitine, and 3-methyladipic acid. The column parameters are assessed in both the positive and negative ion detection modes. Ammonium fluoride is potentially an aggressive mobile phase additive that could have detrimental effects on column lifetime. Column reproducibility is measured and the effects of switching between different additives are also tested.

Adsorption of water from aqueous acetonitrile on silica-based stationary phases in aqueous normal-phase liquid chromatography

Excess adsorption of water from aqueous acetonitrile mobile phases was investigated on 16 stationary phases using the frontal analysis method and coulometric Karl–Fischer titration. The stationary phases include silica gel and silica-bonded phases with different polarities, octadecyl and cholesterol, phenyl, nitrile, pentafluorophenylpropyl, diol and zwitterionic sulfobetaine and phosphorylcholine ligands bonded on silica, hybrid organic-silica and hydrosilated matrices. Both fully porous and core-shell column types were included. Preferential uptake of water by the columns can be described by Langmuir isotherms. Even though a diffuse rather than a compact adsorbed discrete layer of water on the adsorbent surface can be formed because of the unlimited miscibility of water with acetonitrile, for convenience, the preferentially adsorbed water was expressed in terms of a hypothetical monomolecular water layer equivalent in the inner pores. The uptake of water strongly depends on the polarity and type of the column. Less than one monomolecular water layer equivalent was adsorbed on moderate polar silica hydride-based stationary phases, Ascentis Express F5 and Ascentis Express CN column at the saturation capacity, while on more polar stationary phases, several water layer equivalents were up-taken from the mobile phase. The strongest affinity to water was observed on the ZIC cHILIC stationary phases, where more than nine water layer equivalents were adsorbed onto its surface at its saturation capacity. Columns with bonded hydroxyl and diol ligands show stronger water adsorption in comparison to bare silica. Columns based on hydrosilated silica generally show significantly decreased water uptake in comparison to stationary phases bonded on ordinary silica. Significant correlations were found between the water uptake and the separation selectivity for compounds with strong polarity differences.

Correlations between the zeta potentials of silica hydride-based stationary phases, analyte retention behaviour and their ionic interaction descriptors

In this study, the zeta potentials of type-B silica, bare silica hydride, the so-called Diamond Hydride™ and phenyl substituted silica hydride stationary phases have been measured in aqueous-organic media and correction procedures developed to account for the more negative zeta potential values in media containing different acetonitrile contents. Retention studies of 16 basic, acidic and neutral compounds were also performed with these four stationary phases with mobile phases containing 0.1% (v/v) formic acid and various acetonitrile–water compositions ranging from 0–90% (v/v) acetonitrile. The retention properties of these analytes were correlated to the corrected stationary phase zeta potentials measured under these different mobile phase conditions with R2 values ranging from 0.01 to 1.00, depending on the stationary phase and analyte type. Using linear solvation energy relationships, stationary phase descriptors for each stationary phase have been developed for the different mobile phase conditions. Very high correlations of the zeta potentials with the ionic interaction descriptors were obtained for the type-B silica and the Diamond Hydride™ phases and good correlation with bare silica hydride material whilst there was no correlation observed for the phenyl substituted silica hydride phase. The nature of the retention mechanisms which gives rise to these different observations is discussed. The described methods represent a useful new approach to characterize and assess the retention properties of silica-hydride based chromatographic stationary phases of varying bonded-phase coverage and chemistries, as would be broadly applicable to other types of stationary phase used in the separation sciences.

Analysis of cycloserine and related compounds using aqueous normal phase chromatography/mass spectrometry

A new approach is evaluated for the analysis of cycloserine, a strongly hydrophilic drug. The method utilized is aqueous normal phase chromatography with a silica hydride-based stationary phase and mass spectrometry for detection. The samples are analyzed to determine the number of components and they are identified when possible. In addition, the composition change is monitored with respect to time and sample solvent. Analyses using both gradient and isocratic conditions are presented. The repeatability of inter- and intraday analyses is also determined.

Etched succinate‐functionalized silica hydride stationary phase for open‐tubular CEC

An open-tubular (OT) CEC column was designed to anchor ionizable succinate-functionalized ligands onto a silica hydride-based stationary phase through surface etching, silanization, and hydrosilation reactions beginning from a bare fused-silica tube. The modified columns that were produced in each step were monitored by analysis of the effect of performance of EOF on the changes of pH values, concentrations, and the amount of ACN added in the running buffers. By tracking the EOF patterns between columns, the author determined that the surface composition of the final product column was a combination of silanols, silica hydrides, and succinate ligands. Furthermore, lower loading volumes of the succinate ligands prepared for the hydrosilation reaction served to complete the mixed-mode OT-CEC columns, and subsequently to carry out the separation of six phenyl alcohols. Studies on the elution order of these alcohols identified the presence of chromatographic interactions in addition to electrophoresis. Based on the employment of a solvation parameter model, these interactions likely included dispersion interactions, dipole-type interactions, and interactions arising through the polarizable electrons in the solute. The optimum buffer conditions for CEC separations of phenyl alcohols, carbonyl-substituted phenols, and a mixture of nucleosides and thymine were a phosphate buffer (50 mM, pH 10.51), a borate buffer (50 mM, pH 8.62), and a borate buffer (50 mM, pH 9.50), respectively. Overall, the hydride-based stationary phases with ionizable ligands were successfully applied to the OT-CEC separations, and these results confidently propose an ideal route to the synthesis of novel OT-CEC columns.

Analysis of hydrophilic metabolites in physiological fluids by HPLC‐MS using a silica hydride‐based stationary phase

Aqueous normal-phase chromatography was used for the analysis of metabolites in human saliva and urine samples. The column was packed with a silica hydride type separation material. Several gradients were tested with different mobile phase additives in order to produce retention for amino acids, small organic acids, and carbohydrates. Detection was done by TOF MS. In some cases the relative concentration levels of various metabolites in human saliva were compared for normal patients and patients with pancreatic cancer or pancreatitis. The reproducibility of retention of individual metabolites in these complex matrices was tested for several compounds.

1H HR/MAS NMR in the suspended state: Molecular recognition processes in liquid chromatography between steroids and a silica hydride‐based cholesterol phase

A mixture of eight steroids was separated by HPLC on a silica hydride-based stationary phase modified with a moiety of cholesteryl 10-undecanoate. Within the steroid mixture progesterone showed the longest retention time suggesting the strongest interaction with the stationary phase material. To obtain more detailed information upon the effective separation process, interaction studies were performed by high resolution/magic angle spinning (HR/MAS) NMR spectroscopy recorded in the suspended state. (1)H saturation transfer difference (STD) NMR experiments with T(1rho) suppression showed significant hydrophobic binding affinities of progesterone toward the cholesterol column material. These NMR results can be correlated directly to the chromatographic data obtained by HPLC.

Aqueous normal-phase retention of nucleotides on silica hydride columns

The use of silica hydride-based stationary phases for the retention and analysis of nucleotides has been investigated. Both reversed-phase columns with a hydride surface underneath as well as those with an unmodified or a minimally modified hydride material were tested. With these systems, an aqueous normal-phase mode was used with high organic content mobile phases in combination with an additive to control pH for the retention of the hydrophilic nucleotides. Isocratic and gradient elution formats have been used to optimize separations for mixtures containing up to seven components. All conditions developed are suitable for methods that utilize mass spectrometry detection.

Analysis of hydrophilic metabolites by high-performance liquid chromatography–mass spectrometry using a silica hydride-based stationary phase

A novel silica hydride-based stationary phase was used to evaluate the retention behavior in the aqueous normal-phase (ANP) mode of standards representing three classes of metabolites. The effects on retention behavior of amino acids, carbohydrates and small organic acids were examined by altering the column temperature, and by adding different additives to both the mobile phase and sample solvent. Gradient mode results revealed the repeatability of retention times to be very stable for these compound classes. At both 15 and 30 °C, excellent RSD values were obtained with less than 1% variation for over 50 injections of an amino acid mixture. The ability to separate the 19 nonderivatized amino acid standards, organic acids and carbohydrates was demonstrated as well as the potential for this material to separate polar metabolites in complex fluids such as urine.

HPLC retention behavior on hydride‐based stationary phases

Two stationary phases attached to a silica hydride surface, cholesterol and bidentate C18, are investigated with a number of pharmaceutically related compounds in order to illustrate the various retention mechanisms that are possible for these bonded materials. The test solutes range from hydrophilic to hydrophobic based on log P (octanol/water partition coefficient) and pKa values. The mobile phases consist of acidified (formic and perchloric acid) water/methanol or water/ACN mixtures. Of particular interest are the high organic content mobile phase compositions where the retention would increase if the bonded material was operating in the aqueous normal phase (ANP) mode. Plots of retention factor (k) versus mobile phase composition are used to elucidate the retention mechanism. A number of examples are presented where solutes are retained based on RP, ANP, or dual retention mechanisms. The silica hydride-based stationary phases can also retain compounds in the organic normal phase.