Signal Amplification Strategy Research Articles

SERS biosensors based on catalytic hairpin self-assembly and hybridization chain reaction cascade signal amplification strategies for ultrasensitive microRNA-21 detection.

A highly sensitive surface-enhanced Raman scattering (SERS) biosensor has been developedfor the detection of microRNA-21 (miR-21) using an isothermal enzyme-free cascade amplification method involving catalytic hairpin assembly (CHA) and hybridization chain reaction (HCR). The CHA reaction is triggered by the target miR-21, which causes hairpin DNA (C1 and C2) to self-assemble into CHA products. After AgNPs@Capture captures the resulting CHA product, the HCR reaction is started, forming long-stranded DNA on the surface of AgNPs. A strong SERS signal is generated due to the presence of a large amount of the Raman reporter methylene blue (MB) in the vicinity of the SERS "hot spot" on the surface of AgNPs. The monitoring of the SERS signal changes of MB allows for the highly sensitive and specific detection of miR-21. In optimal conditions, the biosensor exhibits a satisfactory linear range and a low detection limit for miR-21 of 42.3 fM. Additionally, this SERS biosensor shows outstanding selectivity and reproducibility. The application of this methodology to clinical blood samples allows for the differentiation of cancer patients from healthy controls. As a result, the CHA-HCR amplification strategy used in this SERS biosensor could be a useful tool for miRNA detection and early cancer screening.

Hook-Like DNAzyme-Activated Autocatalytic Biosensor for the Universal Detection of Pathogenic Bacteria.

DNAzyme-based assays have found extensive utility in pathogenic bacteria detection but often suffer from limited sensitivity and specificity. The integration of a signal amplification strategy could address this challenge, while the existing combination methods require extensive modification to accommodate various DNAzymes, limiting the wide-spectrum bacteria detection. We introduced a novel hook-like DNAzyme-activated autocatalytic nucleic acid circuit for universal pathogenic bacteria detection. The hook-like connector DNA was employed to seamlessly integrate the recognition element DNAzyme with the isothermal enzyme-free autocatalytic hybridization chain reaction and catalytic hairpin assembly for robust exponential signal amplification. This innovative autocatalytic circuit substantially amplifies the output signals from the DNAzyme recognition module, effectively overcoming DNAzyme's inherent sensitivity constraints in pathogen identification. The biosensor exhibits a strong linear response within a range of 1.5 × 103 to 3.7 × 107 CFU/mL, achieving a detection limit of 1.3 × 103 CFU/mL. Noted that the sensor's adaptability as a universal detection platform is established by simply modifying the hook-like connector module, enabling the detection of various pathogenic bacteria of considerable public health importance reported by the World Health Organization, including Escherichia coli, Staphylococcus aureus, Klebsiella pneumoniae, and Salmonella typhimurium. Additionally, the specificity of DNAzyme in bacterial detection is markedly improved due to the signal amplification process of the autocatalytic circuit. This hook-like DNAzyme-activated autocatalytic platform presents a versatile, sensitive, and specific approach for pathogenic bacteria detection, promising to significantly expand the applications of DNAzyme in bacteria detection.

Biomarker Multiplexing with Rational Design of Nucleic Acid Probe Complex

AbstractThe expression profiles of intracellular biomarkers hold significance for understanding cellular biological functions and tracking pathological activities. Due to its programmability and biocompatibility, extensive efforts have been devoted to design various kinds of nucleic acid probes for biomarker detection. However, pinpointing a single biomarker could end up in a false positive signal, delaying diagnosis. In this review, we present an overview of current advances in biomarker detection and signal amplification techniques. We highlight strategies for biomarker multiplexing and signal amplification with combination of isothermal approaches. High specificity and sensitivity are the two criteria for a desired probe, as are the challenges encountered by a probe that operates efficiently in biological systems. With higher biomarker identification accuracy, we may be able to move one step closer to precision medicine.

A portability self-powered sensor facilitates sensitive Cd2+ detection: Dual mechanism and three quantitative mode

As a common heavy metal contaminant, Cd2+ has adverse effects on food safety and consumer health. It is very important for human health to realize highly sensitive Cd2+ detection methods. The self-powered sensing system based on enzyme biofuel cells (EBFCs) does not need an external power supply, which can simplify the experimental equipment and has great application value in portable detection. Thus, the biosensor is innovatively integrated into the screen-printed electrode to construct a new type of portable sensor suitable for on-site and real-time Cd2+ detection. Hybridization chain reaction (HCR) combined with the Cd2+-dependent deoxyribose (DNAzyme) signal amplification strategy is used to enhance the detection sensitivity while specifically recognizing the Cd2+. Moreover, the self-powered sensor combines with smartphones to realize quantitative Cd2+ detection without other instruments and has the characteristic of Effectively improving the hazard detection technology is essential to ensure food safety. Portability, simplicity, and speed are suitable for real-time Cd2+ detection in the field. The dual mechanism and three quantitative modes combining colorimetric and two electrical signals output modes are adopted to realize the visualization and accurate detection. A series of research results confirm that this strategy is of great significance to strengthen the development of intelligent Cd2+ technology, expand the application of self-powered sensing technology, and improve the safety detection system.

The sensing of circRNA with tetrahedral DNA nanostructure modified microfluidic chip

BackgroundCircular ribonucleic acids (circRNAs) are a type of covalently closed noncoding RNA with disease-relevant expressions, making them promising biomarkers for diagnosis and prognosis. Accurate quantification of circRNA in biological samples is a necessity for their clinical application. So far, methods developed for detecting circRNAs include northern blotting, reverse transcription quantitative polymerase chain reaction (RT-qPCR), microarray analysis, and RNA sequencing. These methods generally suffer from disadvantages such as large sample consumption, cumbersome process, low selectivity, leading to inaccurate quantification of circRNA. It was thought that the above drawbacks could be eliminated by the construction of a microfluidic sensor. ResultsHerein, for the first time, a microfluidic sensor was constructed for circRNA analysis by using tetrahedral DNA nanostructure (TDN) as the skeleton for recognition probes and target-initiated hybridization chain reaction (HCR) as the signal amplification strategy. In the presence of circRNA, the recognition probe targets the circRNA-specific backsplice junction (BSJ). The captured circRNA then triggers the HCR by reacting with two hairpin species whose ends were labeled with 6-FAM, producing long DNA strands with abundant fluorescent labels. By using circ_0061276 as a model circRNA, this method has proven to be able to detect circRNA of attomolar concentration. It also eliminated the interference of linear RNA counterpart, showing high selectivity towards circRNA. The detection process can be implemented isothermally and does not require expensive complicated instruments. Moreover, this biosensor exhibited good performance in analyzing circRNA targets in total RNA extracted from cancer cells. SignificanceThis represents the first microfluidic system for detection of circRNA. The biosensor showed merits such as ease of use, low-cost, small sample consumption, high sensitivity and specificity, and good reliability in complex biological matrix, providing a facile tool for circRNA analysis and related disease diagnosis in point-of care application scenes.

A Dual-Recognition Fluorescence Enzyme-Linked Immunosorbent Assay for Specific Detection of Intact Lipid Nanoparticles via a Localized Scaffolding Autocatalytic DNA Circuit Amplifier.

Lipid nanoparticles (LNPs) are emerging as one of the most promising drug delivery systems. The long-circulating effect of intact LNPs (i-LNPs) is the key to efficacy and toxicity in vivo. However, the significant challenge is specific and sensitive detection of i-LNPs. Herein, a dual-recognition fluorescence enzyme-linked immunosorbent assay (DR-FELISA) was developed to directly isolate and detect i-LNPs by combining dual-recognition separation with a one-step signal amplification strategy. The microplates captured and enriched i-LNPs through antibody-antigen reaction. Dual-chol probes were spontaneously introduced into the lipid bilayer of captured i-LNPs, converting the detection of i-LNPs into the detection of double-cholesterol probes. Finally, the end of the dual-chol probes initiated the localized scaffolding autocatalytic DNA circuits (SADC) system for further signal amplification. The SADC system provides a sensitive and efficient amplifier through localized network structures and self-assembled triggers. Simultaneous recognition of i-LNPs surface PEG-lipid and lipid bilayer structures significantly eliminates interference from biological samples. i-LNPs were detected with high selectivity, ranging from 0.2 to 1.25 mg/mL with a limit of detection of 0.1 mg/mL. Moreover, this method allows the isolation and quantitative analysis of different formulations of i-LNPs in serum samples with a satisfactory recovery rate ranging from 94.8 to 116.3%. Thus, the DR-FELISA method provides an advanced platform for the exclusive and sensitive detection of i-LNPs, providing new insights for the study of the quality and intracorporal process of complex formulations.

HCR-Assisted RTF-EXPAR-Based Lateral Flow Analysis for Sensitive Detection of H1N1 Influenza Virus.

The H1N1 influenza virus is a significant pathogen responsible for seasonal influenza, and its frequent outbreaks pose substantial challenges to global public health. The present study successfully developed a lateral flow analysis platform that integrates reverse transcription-free exponential amplification reaction (RTF-EXPAR) and hybridization chain reaction (HCR) processes with functionalized quantum dots for the direct detection of H1N1 influenza virus RNA, eliminating the need for reverse transcription. The fluorescence signal on the band recorded with a smartphone can be utilized for the quantitative determination of the target. Interestingly, the dual signal amplification strategy exhibits high sensitivity with a remarkably low detection limit of 10 aM. Moreover, this platform exhibits excellent flexibility and universality, where the various pathogens can be determined by replacing the specific nucleic acid fragments in RTF-EXPAR. The aforementioned advantages reveal its huge potential in the early diagnosis of H1N1 influenza virus infection and developing point-of-care testing (POCT) equipment for nucleic acid analysis.

DSN signal amplification strategy based nanochannels biosensor for the detection of miRNAs

MiRNA-21 is recognized as an important biological marker for the diagnosis, treatment, and prognosis of breast cancer. Here, we have created a nanochannel biosensor utilizing the duplex-specific nuclease (DSN) signal amplification strategy to achieve the detection of miRNAs. In this system, DNA as the capture probe was covalently immobilized on the surface of nanochannels, which hybridized with the target miRNA and forms RNA/DNA duplexes. DSN could cleave the probe DNA in RNA/DNA duplexes, recycling target miRNA, which may again hybridized with other DNA probes. After N cycles, most of the DNA probes had been cleaved, and the content of miRNA could be quantified by detecting changes in surface charge density. This biosensor can distinguish miR-21 from non-complementary miRNAs and one-base mismatched miRNAs, with reliable detection limits as low as 1 fM in PBS. In addition, we had successfully applied this method to analysis of total RNA samples in MCF-7 cells and HeLa cells, and the nanochannels had also shown excellent responsiveness and strong anti-interference ability. This new method is expected to contribute to miRNA detection in clinical diagnostics, providing a unique approach to detecting and distinguishing disease-associated molecules.

Novel dynamic light scattering immunosensor for prostate specific antigens based upon dual-tyramine signal amplification strategy

The sensitive detection of biomarkers is crucial for the early diagnosis, treatment, and improvement of the quality of life of patients. A novel dynamic light scattering-dual tyramine signal amplification strategy (DLS-dTSA) was constructed to detect prostate-specific antigen (PSA). The Oligo 1 was first immobilized in a 96-well plate for PSA capture. Afterwards, horseradish peroxidase (HRP) and Oligo 2 functionalized AuNPs (HRP-Au NPs-Oligo 2) bound to Oligo 1 through DNA hybridization. In the presence of hydrogen peroxide (H2O2), tyramine could be converted into a transient radical intermediate by HRP, leading to the aggregation of tyramine and HRP-labeled AuNPs (tyramine-AuNPs-HRP) near HRP-AuNPs-Oligo 2, triggering the first TSA process. Later, the PSA was added into the 96-well plate, to specifically recognize aptamer and thus depart the Au-aggregate from the 96-well plate. Then H2O2 was added to the Au-aggregate solution, triggering the free Au-aggregate to gather again, realizing the second TSA amplification. The average diameter of Au NPs increased linearly with the concentration of PSA during the range of 0.0001 – 1000 ng mL−1, and the limit of detection was 0.033 pg mL−1. Moreover, this strategy has been used to analyze PSA in human serum samples successfully, demonstrating the potential application of the proposed method for rapid clinical and early clinical diagnosis of prostate cancer in vitro.

A ratiometric SERS aptasensor based on catalytic hairpin self-assembly mediated cyclic signal amplification strategy for the reliable determination of E. coli O157:H7.

Aratiometric SERS aptasensor based on catalytic hairpin self-assembly (CHA) mediated cyclic signal amplification strategy was developed for the rapid and reliable determination of Escherichia coli O157:H7. The recognition probe was synthesized by modifying magnetic beads with blocked aptamers, and the SERS probe was constructed by functionalizing gold nanoparticles (Au NPs) with hairpin structured DNA and 4-mercaptobenzonitrile (4-MBN). The recognition probe captured E. coli O157:H7 specifically and released the blocker DNA, which activated the CHA reaction on the SERS probe and turned on the SERS signal of 6-carboxyl-x-rhodamine (ROX). Meanwhile, 4-MBN was used as an internal reference to calibrate the matrix interference. Thus, sensitive and reliable determination and quantification of E. coli O157:H7 was established using the ratio of the SERS signal intensities of ROX to 4-MBN. This aptasensor enableddetection of 2.44 × 102 CFU/mL of E. coli O157:H7 in approximately 3h without pre-culture and DNA extraction. In addition, good reliability and excellent reproducibility were observed for the determination of E. coli O157:H7 in spiked water and milk samples. This study offered a new solution for the design of rapid, sensitive, and reliable SERS aptasensors.

Ultrasensitive self-powered biosensor with facile chemical signal amplification strategy using hydrogen peroxide-triggered silver oxidation reaction

The amplification strategies used for self-powered biosensor based on biofuel cell (BFC-SPB) need to be further developed. Because the currently developed strategies utilized the complicated hybridization of DNA or poorly readable current signal of capacitors for amplification, which limits the practical application in public health emergencies. Here, we present a facile chemical amplification strategy for BFC-SPB. The 5-minute amplification was triggered by simply adding H2O2 solution dropwise to the sensing cathode after the formation of the immune sandwich. The Ag NP of immunoprobe were oxidized to Ag(I), which can be served as the electron acceptor of the cathode. The amount of immunoprobe was positively correlated with that of the antigen, resulting in corresponding and high concentration of Ag(I) after the amplification, which enhanced the ability of the cathode as the electron acceptor. Meanwhile the glucose oxidation reaction (GOR) was performed on the bioanode modified with glucose oxidase (GOx). After assembling the bioanode and sensing cathode, the open circuit voltage of the BFC-SPB, measured by digital multimeter, distinctly rises with the elevated concentration of the antigen. To demonstrate the proof of concept, immunoglobulin G (IgG), selecting as a model analyte, was sensitively detected using this method. Result indicated that the limit of detection was 4.4 fg mL-1 (0.03 amol mL-1) in the linear range of 1 pg mL-1-10 μg mL-1. This work initiates a brand-new way of chemical amplification strategy for BFC-SPB, and offers a promising platform for practical applications.

Synergistic powering of DNA walker movement by endogenous dual enzymes for constructing dual-mode biosensors

To achieve highly sensitive and reliable detection of apurinic/apyrimidinic endonuclease 1 (APE1), a critical cancer diagnostic biomarker, we designed a DNA walker-based dual-mode biosensor, utilizing cellular endogenous dual enzymes (APE 1 and Flap endonuclease 1 (FEN 1)) to collaborate in activating and propelling DNA walker motion on DNA-functionalized Au nanoparticles. Incorporating both fluorescence and electrochemical detection modes, this system leverages signal amplification from DNA walker movement and cascade amplification through tandem hybridization chain reactions (HCR), achieving highly sensitive detection of APE 1. In the fluorescence mode, continuous DNA walker movement, initiated by APE1 and driven by FEN1, generates a robust signal response within a concentration range of 0.01–500 U mL−1, presenting a good linearity in the concentration range of 0.01–10 U mL−1, with a detection limit of 0.01 U mL−1. In the electrochemical detection module, the cascade upstream DNA walker and downstream HCR dual signal amplification strategy further enhances the sensitivity of APE1 detection, extending the linear range to 0.01–50 U mL−1 and reducing the detection limit to 0.002 U mL−1. Rigorous validation demonstrates the biosensor's specificity and anti-interference capability against multiple enzymes. Moreover, it effectively distinguishes cancer cells from normal cell lysates, exhibiting excellent stability and consistency in the dual-modes. Overall, our findings underscore the efficacy of the developed dual-mode biosensor for detecting APE1 in serum and cell lysates samples, indicating its potential for clinical applications in disease diagnosis.

Hairpin-Empowered Invasive Reaction Combined with Catalytic Hairpin Assembly Cascade Amplification for the Specific Detection of Single-Nucleotide Polymorphisms.

Single-nucleotide polymorphism (SNP) is widely used in the study of disease-related genes and in the genetic study of animal and plant strains. Therefore, SNP detection is crucial for biomedical diagnosis and treatment as well as for molecular design breeding of animals and plants. In this regard, this article describes a novel technique for detecting SNP using flap endonuclease 1 (FEN 1) as a specific recognition element and catalytic hairpin assembly (CHA) cascade reaction as a signal amplification strategy. The mutant target (MT) was hybridized with a biotin-modified upstream probe and hairpin-type downstream probe (DP) to form a specific three-base overlapping structure. Then, FEN 1 was employed for three-base overlapping structure-specific recognition, namely, the precise SNP site identification and the 5' flap of DP dissociation. After dissociation, the hybridized probes were magnetically separated by a streptavidin-biotin complex. Especially, the ability to establish such a hairpin-type DP provided a powerful tool that could be used to hide the cut sequence (CS) and avoid false-positive signals. The cleaved CS initiated the CHA reaction and allowed superior fluorescence signal generation. Owing to the high specificity of FEN 1 for single base recognition, only the MT could be distinguished from the wild-type target and mismatched DNA. Owing to the dual signal amplification, as low as 0.36 fM MT and 1% mutation abundance from the mixtures could be detected, respectively. Furthermore, it could accurately identify SNPs from human cancer cells, as well as soybean leaf genome extracts. This strategy paves the way for the development of more precise and sensitive tools for diagnosing early onset diseases as well as molecular design breeding tools.

MXene@MnIn2S4‐Gated Organic Photoelectrochemical Transistors with Nanozyme‐Mediated Multiple Quenching Effects for Ultrasensitive Detection of Okadaic Acid

AbstractOrganic optoelectronics have attracted widespread interdisciplinary research interest but lags far behind in the application in marine environmental detection. The organic photoelectrochemical transistor (OPECT) shows promise as a powerful tool for comprehensive monitoring and early warning of marine conditions, which can be further enhanced by the valuable signal amplification strategy of nanozyme‐mediated catalytic precipitation. Herein, OPECT technology is integrated with nanozyme‐mediated catalytic precipitation for the first time, establishing an ultrasensitive detection platform for okadaic acid (OA). Specifically, MXene@MnIn2S4 (MXMnIS) hybrid composed of Schottky‐junction is synthesized via a hydrothermal method, which can efficiently modulate the device with high current gain. Linking with a sandwich immunoassay, the Ru‐C3N4 nanozyme with peroxidase‐mimicking activity can catalyze the oxidation of 4‐chloro‐1‐naphthol (4‐CN) to form an insoluble precipitate on the electrode surface, resulting in a decrease in the photocurrent and altering the transistor response. Importantly, the proposed OPECT biosensor presented an excellent sensitivity and a low detection limit (32.5 pM), fully satisfying the fundamental requirements for the quantitative detection of intracellular and extracellular OA in the practical culture media of Prorocentrum lima at different growth stages. This OPECT platform based on the nanozyme‐mediated quenching effect is significant for effectively monitoring the safety of the marine ecological environment and food safety.

Dual-sensitized heterojunction Ag2S/ZnS/NiS composites with entire visible-light region absorption for ultrasensitive photoelectrochemical detection of tobramycin

In this study, an ultrasensitive photoelectrochemical (PEC) aptasensor based on dual-sensitized heterojunction Ag2S/ZnS/NiS composites as a signal probe was proposed for the detection of tobramycin (TOB) by combining a cascaded quadratic signal amplification strategy. Specifically, compared to the limited visible light-harvesting capability of single sensitized composites, Ag2S/ZnS/NiS composites with p-n and n-n heterojunction could greatly improve the light energy utilization to tremendously strengthen the optical absorption in the entire visible-light region. Moreover, dual-sensitized heterojunction could effectively hinder the rapid recombination of photoelectrons and holes (carriers) to obtain a good photocurrent for improving the sensitivity of the aptasensor. Furthermore, a cascaded quadratic signal amplification strategy was applied to convert trace target TOB into plentiful gold nanoclusters (Au NCs) labelled double-stranded DNA for the construction of PEC aptasensor, with a broad linear detection range from 0.01 to 100 ng mL−1 and a low detection limit of 3.38 pg mL−1. Importantly, this study provided a versatile and sensitive PEC biosensing platform for TOB analysis, and demonstrated its successful application for TOB detection in milk samples. This protocol provides a novel dual-sensitized heterojunction composites to develop a highly efficient and harmfulless PEC aptasensor, which is expected to be used in food safety, environmental monitoring and other areas.

A covalent organic framework nanosheet-nanochannel composite with signal amplification strategy for electrochemical enantioselective recognition

Recognition and separation of chiral isomers are of great importance in both industrial and biological applications. However, owing to identical molecular formulas and chemical properties of enantiomers, signal transduction and amplification are still two major challenges in chiral sensing. In this study, we developed an enantioselective device by integrating chiral covalent organic framework nanosheets (CONs) with nanochannels for sensitive identification and quantification of enantiomers. Using 3,4-dihydroxyphenylalanine (DOPA) as the model analyte, the as-prepared chiral nanofluidic device exhibits a remarkable chiral recognition ability to l-DOPA than d-DOPA. More importantly, due to the chelation of DOPA with Fe3+ ions, it can efficiently block the ion transport through channel and shield the channel surface charge, which will amplify the difference in the electrochemical response of l-DOPA and d-DOPA. Therefore, a sensitive chiral recognition can be achieved using the present nanofluidic device coupled using electrochemical amplification strategy. Notably, using this method, an ultra-low concentration of l-DOPA (as low as 0.21 pM) can be facilely and successfully detected with a linear range of 1 pM–10 μM. This study provides a reliable and sensitive approach for achieving highly selective detection of chiral molecules.

Peptide-based electrochemical detection of prostate cancer-derived exosomes using a dual signal amplification strategy

Prostate cancer-derived exosomes have important potential as biomarkers for diagnosis and treatment of prostate cancer. But such specific exosomes towards clinical application remains problematic due to their comparatively low concentration in relation to other constituents of blood. Additionally, the presence of particles in blood that share a similar size with exosomes adds to the complexity of their selective and sensitive detection. Consequently, the detection of exosomes derived from prostate cancer in intricate biological settings necessitates the implementation of highly sensitive and specific biosensors. Herein, we report an electrochemical biosensor for prostate cancer-derived exosomes detection, with two-level selectivity achieved through a sandwich structure involving specific peptides and two-level amplification utilizing the combination of biotin-streptavidin linkage and G-quadruplex hemin mimetic peroxidase to enhance the sensitivity. Evaluation of PSMA positive exosomes at various concentrations demonstrates a remarkable limit of detection as low as 26 particles/μL, as well as an excellent linear sensor response spanning from 1.0 × 102 to 1.0 × 107 particles/μL. Compared to the enzymatic biosensor, this biosensor proves more versatile without a label or enzyme, and may be more promising for clinical applications.

Highly sensitive electrochemical quantification of carbendazim via synergistic enhancement of ring-opening metathesis polymerization and polyethyleneimine modified graphene oxide.

Anovel aptamer-based sensor was developed using the signal amplification strategy of ring-opening metathesis polymerization (ROMP) and polyethyleneimine modified graphene oxide to achieve trace detection of carbendazim (CBZ). The dual identification of aptamer and antibody was used to avoid false positive results and improve the selectivity. Polyethyleneimine modified graphene oxide (GO-PEI), as a substrate material with excellent conductivity, was modified on the surface of aglassy carbon electrode (GCE) to increase the grafting amount of aptamer on the electrode surface. Moreover, a large number of cyclopentenyl ferrocene (CFc) was aggregated to form long polymer chains through ring-opening metathesis polymerization (ROMP), so as to significantly improve the detection sensitivity of the biosensor. The linear range of this sensor was 1 pg/mL-100 ng/mL with a detection limit as low as 7.80fg/mL. The sensorexhibited excellent reproducibility and stability, and also achieved satisfactory results in actual sample detection. The design principle of such a sensor could provide innovative ideas for sensors in the detection of other types of targets.

Dual signal amplification strategy for enhancing Eu2Sn2O7 electrochemiluminescence immunosensor for the sensitive detection of N-terminal pro-brain natriuretic peptide

Pyrochlore oxide Eu2Sn2O7, an electrochemiluminescence (ECL) emitter, exhibits favorable characteristics such as low toxicity, good stability, and abundant electron vacancies. In this work, the interfacial electron transfer efficiency of Eu2Sn2O7 was significantly enhanced through the in situ surface modification with silver nanoparticles (AgNP). Moreover, we introduced a dual signal-amplification strategy involving AgNP and H2O2. The AgNP as a co-reaction catalyst facilitated the reduction of the co-reactant K2S2O8. The OH• generated through H2O2 reduction on the electrode surface induced the decomposition of K2S2O8 to SO4•−. The MoS2-PEI-AuNP (PEI: polyethylenimine) composite was selected as an ideal substrate. A highly sensitive ECL immunosensor based on Eu2Sn2O7-Ag and MoS2-PEI-AuNP was constructed to detect N-terminal pro-brain natriuretic peptide (NT-proBNP). Under the optimized experimental conditions, the ECL immunosensor demonstrated a linear range of 10 fg·mL−1–50 ng·mL−1, with a detection limit of 2.9 fg·mL−1, and showed excellent stability and specificity. The results demonstrate the potential of the ECL immunosensor for clinical diagnosis applications.

Well-ordered Au@Ag NBPs/SiO2 nanoarray for sensitive detection of chloramphenicol via DNAzyme-assisted SERS sensing

Misuse of chloramphenicol (CAP) can lead to severe food safety issues. Therefore, the accurate and sensitive detection of CAP residues is important for public health. Herein, a convenient and reliable interfacial self-assembly technique was used to form a uniform Au@Ag nanobipyramids (NBPs) film on an ordered SiO2 nanosphere array (SiO2 NS), which served as a Raman-enhanced substrate. In conjunction with a deoxyribonucleic acid enzyme–induced signal amplification strategy, we developed a novel surface-enhanced Raman scattering (SERS) biosensor for the selective and sensitive detection of CAP. The biosensor exhibited a detection limit of 6.42 × 10−13 mol·L−1 and a detection range of 1.0 × 10−12–1.0 × 10−6 mol·L−1. The biosensor could detect CAP in spiked milk samples with a high accuracy, and its recovery rates ranged from 97.88% to 107.86%. The as-developed biosensor with the advantages of high sensitivity and high selectivity offers a new strategy for the rapid, reliable and sensitive detection of CAP, rendering it applicable to food safety control.