Shell-like Structures Research Articles

Prediction of vibro-acoustic sound emissions based on mapped structural dynamics

In the product design of shell-like housing structures for vibrating bodies, acoustic emission plays a significant role in usability and customer comfort. Consequently, the prediction of the emitted sound, e.g., in the form of the radiated sound power, is desired in the earliest possible stage of the development cycle. In industry, performing extensive acoustic testing using microphone arrays or laser scanning vibrometry is often time-consuming or infeasible, as it requires an acoustically treated measurement chamber and specific measurement equipment. On the other hand, accelerometer data is more straightforward to obtain due to the lower cost of the sensors and relaxed constraints on the measurement chamber compared to acoustic measurements. Hence, this contribution utilizes available surface velocity data in an acoustic simulation of the free-field Helmholtz problem. In doing so, it compares a conventional element-based and a mesh-less data-driven mapping technique to investigate the reduction of the number of provided sensor positions for the radiation problem. The open-source boundary element framework NiHu is used to give accurate predictions of acoustic emissions over a wide frequency range. The approach is applied to an industrial problem and validated against microphone measurements.

Quantification of delamination resistance data of FRP composites and its limits

Quantitative delamination resistance data of fibre-reinforced polymer-matrix (FRP) composites for quasi-static or cyclic fatigue loads are determined under different loading modes and load rates, respectively. Such data find use, e.g., in FRP materials’ development, materials’ selection, assessment of durability, or structural design. Round robins during test development yielded repeatability and reproducibility (coefficients of variation) of roughly 10 to 25%. This scatter has several different sources. Intrinsic material variability amounts to a few percent at best, at least for advanced manufacturing processes. This intrinsic scatter is essential for material comparisons and structural design. Measurement resolution specified in standardised test procedures yields a maximum of 4–5% variability. Most of the remaining scatter comes from other, extrinsic sources. Test operator actions, e.g., choice of test set-up, manual data acquisition or data analysis can yield extrinsic scatter. Damage mechanisms during delamination initiation and propagation act on the micro- and meso-scale, typically a few micrometer to a few hundred micrometer in size, with corresponding time-scales estimated to between a few tens of nanoseconds and a few microseconds. Defect size-scales are hence several orders of magnitudes lower than test specimen and structural scales, respectively. Predictive capability of models using such test data for structures are, therefore, limited. Major issues are up-scaling from straight beam-like specimens to larger shell-like structures, possibly with complex shape and varying thickness as well as from unidirectional fibre orientation to multidirectional lay-ups.

Solubility, (micro)structure, and in vitro digestion of pea protein dispersions as affected by high pressure homogenization and environmental conditions

In this work, dispersions were prepared with commercial pea protein isolate (PPI) and subjected to different (i) high pressure homogenization (HPH) intensities (0 – 200 MPa) (room temperature, pH 7) or (ii) environmental conditions (60 °C, pH 7 or pH 12) to generate dispersions with distinct protein molecular and microstructural characteristics, impacting protein solubility. Besides, protein digestion was analyzed following the static INFOGEST in vitro digestion protocol. Generally, increasing pressure of the homogenization treatment was linked with decreasing particle sizes and enhanced protein digestion. More specifically, the dispersion that did not undergo HPH (0 MPa) as well as the dispersion treated at 60 °C, pH 7, had highly similar microstructures, consisting of large irregular particles (10 – 500 µm) with shell-like structures, and exhibited low solubility (around 15 % and 28 %, respectively), which resulted in limited proteolysis (35 % and 42 %, respectively). In contrast, the dispersion subjected to HPH at 100 MPa and the dispersion treated at 60 °C, pH 12 also had similar microstructures with small and homogeneous particles (<1 µm), and exhibited relatively good solubility (54 % and 31 %, respectively), which led to enhanced protein digestion levels (87 % and 74 %, respectively). This study highlights the potential of food processing on macronutrient (micro)structure and further gastrointestinal stability and functionality.

An eco-friendly self-assembled catalyst preparation and study of tetracycline degradation: Performance, mechanism to application

Chloromethyl styrene resin can undergo specific chemical modifications and is an excellent adsorbent material for treating difficult-to-degrade substances in wastewater. In this study, chloromethyl styrene resin will be used as a carrier, and polystyrene chloromethyl resin (PS-Cl) was converted into PS-NH2 by amino modification. The self-assembly of cobalt-based metal–organic framework (CoMOF) was induced on the surface of PS-NH2 by using a novel preparation technique. The performance of the prepared PS-NH2@CoMOF self-assembled catalysts with core–shell-like structures in degrading the target pollutant, tetracycline (TC), was evaluated. The catalysts effectively induced rapid OH radical production from H2O2, had a degradation rate of as high as 88.3 % for 20 mg/L TC solution, and were highly stable and adaptable to aqueous environments. Free radicals and intermediates in the catalytic degradation process were detected by electron paramagnetic resonance and high-performance liquid chromatography mass spectrometry, and possible catalytic degradation pathways were analyzed. The catalytic dissociation behavior of H2O2 in the presence of different catalysts was studied in depth and compared with that of similar metal–organic framework materials through density-functional theory calculations. Results demonstrated the excellent performance of the PS-NH2@CoMOF catalysts. Finally, the catalysts' potential for use in practical engineering applications was evaluated with a flow column experimental model, and the results were more than satisfactory. Therefore, the use of the catalysts to degrade TC has great potential.

Binary Interaction Can Yield a Diversity of Circumstellar Media around Type II Supernova Progenitors

Recent observations of supernovae (SNe) have indicated that a fraction of massive stars possess dense circumstellar medium (CSM) at the moment of their core collapses. They suggest the presence of additional activities of the SN progenitor driving the enhancement of the mass-loss rate, and some physical processes attributing to a single star’s activities have been considered. In this study, we carry out binary evolutionary simulations of massive stars by MESA and investigate effects on the subsequent CSM formation through hydrodynamical simulations by PLUTO. We show that the mass transfer rate in a binary can increase at the beginning of the Roche lobe overflow, and this enhancement would be associated with the structure of the CSM before the explosion. We also illustrate that, depending on the orbital period of the binary, the density structure of the CSM can have a diverse distribution, including shell-like and cliff-like structures. These characteristic structures appear within the length scale of ∼1017 cm and could be traced by long-term observations of SNe, if the slow velocity of the CSM is assumed (∼10 km s−1). Our results highlight the importance of binary interaction in the aspect of reproducing the diversity of the CSM configuration.

Effect of Mineral Powders on the Properties of Foam Concrete Prepared by Cationic and Anionic Surfactants as Foaming Agents.

Foam concrete is a type of cement mortar in which air bubbles are introduced using an appropriate foaming agent. The complex conditions for the preparation of solid particle stabilized foams limit their wide application in construction. In this study, a method of adding small amounts of calcite (Cal) and muscovite (Mus) to the cement paste matrix is proposed to improve the properties of foam concrete prepared with cationic and anionic surfactants as foaming agents. The effects of mineral powders on the flowability, compressive strength, water absorption, pore characteristics, thermal conductivity and frost resistance of foam concrete were investigated and the enhancement mechanism was revealed by the results of XRD, low-field nuclear magnetic resonance (LF-NMR), Fourier transform infrared spectroscopy (FTIR) and SEM. The results showed that the mineral powders interacted with anionic and cationic surfactants through physical adsorption. Whether anionic or cationic surfactants were used as foaming agents, the addition of mineral powders promoted the formation of shell-like structures around the foam, thus enhancing the performance of foam concrete. As a result, the fluidity, compressive strength and frost resistance of the foam concrete increased, the water absorption and thermal conductivity decreased, and the average size of the pores decreased.

Evaluation of seasonal anoxia in Florianópolis North Bay through environmental indicators

Foraminifera, as single-celled organisms encased in shell-like structures known as tests, play pivotal roles within marine ecosystems. Their ubiquitous presence and fossilized remains provide invaluable insights into past environmental conditions. However, contemporary challenges posed by human activities imperil foraminiferal populations, notably through pollution-induced hypoxia, a condition characterized by oxygen depletion in aquatic environments. This study focuses on utilizing foraminifera as bioindicators to assess hypoxia within Florianópolis's North Bay, situated in Brazil. Sediment samples collected in May and October 2014 served as the basis for this investigation. By analyzing both abiotic and biological data, the study uncovered concerning trends, including low oxygen levels and elevated organic matter content in the bay's sediments. These environmental conditions create favorable habitats for opportunistic species such as Ammonia tepida, known for their resilience to fluctuating environmental parameters. Additionally, the presence of an invasive species, Trochammina hadai, further complicates the ecological dynamics of the bay. This invasive species, originally from San Francisco Bay and Japan, underscores the interconnectedness of marine ecosystems and the potential consequences of biological invasions. The findings from this study shed light on the ecological imbalance within Florianópolis's North Bay, highlighting the urgent need for comprehensive management strategies. Addressing the root causes of pollution and hypoxia is paramount to safeguarding the bay's biodiversity and ecological health. Implementing effective conservation measures will be essential to ensure the long-term vitality of this marine ecosystem for future generations.

Discovery of a nova super-remnant cavity surrounding RS Ophiuchi

ABSTRACT The prototypical nova super-remnant (NSR) was uncovered around the most rapidly recurring nova (RN), M31N 2008-12a. Simulations of the growth of NSRs revealed that these large structures should exist around all novae, whether classical or recurrent. NSRs consist of large shell-like structures surrounding excavated cavities. Predictions, informed by these simulations, led to the discovery of an extended cavity coincident with the Galactic RN, RS Ophiuchi (RS Oph), in far-infrared archival IRAS images. We propose that this cavity is associated with RS Oph and is therefore evidence of another NSR to be uncovered.

Growth prolongation of human induced pluripotent stem cell aggregate in three-dimensional suspension culture system by addition of botulinum hemagglutinin

Human induced pluripotent stem cells (hiPSCs) can be used in regenerative therapy as an irresistible cell source, and so the development of scalable production of hiPSCs for three-dimensional (3D) suspension culture is required. In this study, we established a simple culture strategy for improving hiPSC aggregate growth using botulinum hemagglutinin (HA), which disrupts cell-cell adhesion mediated by E-cadherin. When HA was added to the suspension culture of hiPSC aggregates, E-cadherin-mediated cell-cell adhesion was temporarily disrupted within 24h, but then recovered. Phosphorylated myosin light chain, a contractile force marker, was also recovered at the periphery of hiPSC aggregates. The cell aggregates were suppressed the formation of collagen type I shell-like structures at the periphery by HA and collagen type I was homogenously distributed within the cell aggregates. In addition, these cell aggregates retained the proliferation marker Ki-67 throughout the cell aggregates. The apparent specific growth rate with HA addition was maintained continuously throughout the culture, and the final cell density was 1.7-fold higher than that in the control culture. These cells retained high expression levels of pluripotency markers. These observations indicated that relaxation of cell-cell adhesions by HA addition induced rearrangement of the mechanical tensions generated by actomyosin in hiPSC aggregates and suppression of collagen type I shell-like structure formation. These results suggest that this simple and readily culture strategy is a potentially useful tool for improving the scalable production of hiPSCs for 3D suspension cultures.

A detailed look at the thermal and nonthermal X-ray emission from the Vela supernova remnant with SRG/eROSITA

Context. The Vela supernova remnant (SNR) is one of the most nearby and extended objects in the X-ray sky. It constitutes a unique laboratory for studying the thermal and nonthermal X-ray emission from an evolved SNR and its central plerion at an unprecedented level of detail. Aims. Our goal is to characterize the hot ejecta and shocked interstellar medium (ISM) associated with the Vela SNR, as well as the synchrotron-emitting relativistic electrons injected into the ambient medium by the central pulsar. To achieve this, we analyzed the dataset of Vela acquired by SRG/eROSITA during its first four all-sky surveys. Methods. We present and analyze the energy-dependent morphology of Vela using X-ray images extracted in multiple energy bands. A quantitative view of the physical parameters affecting the observed thermal and nonthermal emission is obtained by performing spatially resolved X-ray spectroscopy of over 500 independent regions using multicomponent spectral models. Results. Imaging demonstrates that the X-ray emission of the Vela SNR consists of at least three morphologically and energetically distinct components, with shell-like structures dominating below 0.6 keV, radial outward-directed features becoming apparent at medium energies, and the pulsar wind nebula (PWN) dominating the hard emission above 1.4 keV. Our spectroscopy reveals a highly structured distribution of X-ray absorption column densities, which intriguingly appears to lack any correlation with optical extinction measurements, possibly due to dust destruction or a clumpy ISM. The shock-heated plasma in Vela is found to be comparatively cool, with a median temperature of 0.19 keV, but exhibits several, often ejecta-rich, warmer regions. Within the observed ejecta clumps, we find an unexpectedly high concentration of neon and magnesium relative to oxygen, when compared to nucleosynthetic predictions. This includes the bright “shrapnel D”, in which we can separate shocked ISM in the soft bow-shock from a hot, ejecta-rich clump at its apex, based on the new data. Finally, we find an extremely extended, smoothly decreasing distribution of synchrotron emission from the PWN, which extends up to three degrees (14 pc) from the pulsar. The integrated X-ray luminosity of the PWN in the 0.5–8.0 keV energy band corresponds to 1.5 × 10−3 of the pulsar’s present-day spin-down power. The extended PWN emission likely traces the diffusion of a high-energy electron population in an ISM-level magnetic field, which requires the existence of a TeV counterpart powered by inverse Compton radiation.

Incorporation and Deposition of Spin Crossover Materials into and onto Electrospun Nanofibers.

We synthesized iron(II)-triazole spin crossover compounds of the type [Fe(atrz)3]X2 and incorporated and deposited them on electrospun polymer nanofibers. For this, we used two separate electrospinning methods with the goal of obtaining polymer complex composites with intact switching properties. In view of possible applications, we chose iron(II)-triazole-complexes that are known to exhibit spin crossover close to ambient temperature. Therefore, we used the complexes [Fe(atrz)3]Cl2 and [Fe(atrz)3](2ns)2 (2ns = 2-Naphthalenesulfonate) and deposited those on fibers of polymethylmethacrylate (PMMA) and incorporated them into core-shell-like PMMA fiber structures. These core-shell structures showed to be inert to outer environmental influences, such as droplets of water, which we purposely cast on the fiber structure, and it did not rinse away the used complex. We analyzed both the complexes and the composites with IR-, UV/Vis, Mössbauer spectroscopy, SQUID magnetometry, as well as SEM and EDX imaging. The analysis via UV/Vis spectroscopy, Mössbauer spectroscopy, and temperature-dependent magnetic measurements with the SQUID magnetometer showed that the spin crossover properties were maintained and were not changed after the electrospinning processes.

Finite deformation analysis of electro-active shells

In this contribution, a novel nonlinear formulation for the finite deformation analysis of shell-like structures made of dielectric polymers and subject to electrical loading is developed. The kinematics of mechanical deformation is described via a seven-parameter shell model. Moreover, a second-order Taylor expansion, containing three parameters, is proposed to approximate the electrical potential through the thickness of the shell. The combined mechanical and electrical parameters constitute a ten-parameter electro-shell model. After developing the variational formulation of the problem, a nonlinear finite element formulation for the numerical solution of the coupled electromechanical problem is also developed. The formulation is further enriched by the enhanced assumed strain method to alleviate locking in thin shells. Finally, the applicability of the proposed formulation in several benchmark examples is demonstrated. In particular, it is shown that the formulation can capture the results available in the literature with high accuracy.

Hierarchical Structures Formed in an Atmospheric Pressure Plasma Jet by Polymerization from an Aerosol of Oxalic Acid Stabilized WO3–x Nanosheet Colloids: Toward High-Performance Electrochemical Devices and Sensors

The development of microstructures which combine high total surface area and high porosity is crucial for technologies such as electrocatalysis, electrochromics, and sensors. High deposition rate, composition control of deposition, and low processing temperature to retain active compositions are also desirable. To this end, this study describes combining colloidal sol chemistry with a nonthermal atmospheric pressure dielectric barrier discharge plasma jet to print hybrid inorganic/organic tungsten trioxide/oxalic acid (WO3–x/OA) microspheres. Injection of an aerosol of oxalic acid stabilized colloidal tungstic acid into an atmospheric pressure plasma jet results in the deposition of spherical structures in which the colloid is trapped within a plasma-polymerized organic shell. Subsequent low-temperature sintering produces hierarchical spherical shell-like structures comprising tungsten oxide nanosheets. Alteration of the gas flow rate changes the composition of the deposited material. The method has promise for the general preparation from colloidal precursors of porous materials of controlled morphology and composition with hierarchical microstructures, such as are required for applications in electrochemical devices and sensors which need a high ratio of surface area to volume and connectivity throughout the structure, yet also need a microstructure which is open for rapid exchange of reactants.

Ritz R-Function Method for the Analysis of Variable-Stiffness Plates

This paper presents a novel approach for analyzing the free vibration response of variable-stiffness panels. A method is proposed herein, which relies upon a combination of the R-functions and the Ritz method. A powerful and peculiar aspect of this approach consists in the possibility of handling any complex geometry with reduced modeling effort and few degrees of freedom to be handled. The so-obtained formulation is of particular interest for the early design studies of plate- and shell-like structures, especially when topological features are of concern. Specifically, the possibility of studying configurations of arbitrary shape with reduced effort is of crucial importance for exploiting the potential offered by composites with nonstraight fibers. Exemplary results are presented for structures with different geometries and shapes. The comparison against results from the literature and finite element calculations reveals the potential of the approach as a valuable mean for assisting the design of innovative variable-stiffness configurations.

African swine fever virus transmembrane protein pEP84R guides core assembly.

African swine fever virus (ASFV) causes a devastating hemorrhagic disease with worldwide circulation and no widely available therapeutic prevention. The infectious particle has a multilayered architecture that is articulated upon an endoplasmic reticulum (ER)-derived inner envelope. This membrane acts as docking platform for the assembly of the outer icosahedral capsid and the underlying core shell, a bridging layer required for the formation of the central genome-containing nucleoid. While the details of outer capsid assembly are relatively well understood, those of core formation remain unclear. Here we report the functional characterization of pEP84R, a transmembrane polypeptide embedded in the inner envelope that surrounds the viral core. Using an ASFV recombinant inducibly expressing the EP84R gene, we show that absence of pEP84R results in the formation of non-infectious core-less icosahedral particles displaying a significant DNA-packaging defect. Concomitantly, aberrant core shell-like structures formed by co-assembly of viral polyproteins pp220 and pp62 are mistargeted to non-ER membranes, as also occurs when these are co-expressed in the absence of other viral proteins. Interestingly, co-expression of both polyproteins with pEP84R led to the formation of ER-targeted core shell-like assemblies and co-immunoprecipitation assays showed that pEP84R binds to the N-terminal region of pp220. Altogether, these results indicate that pEP84R plays a crucial role in core assembly by targeting the core shell polyproteins to the inner viral envelope, which enables subsequent genome packaging and nucleoid formation. These findings unveil a key regulatory mechanism for ASFV morphogenesis and identify a relevant novel target for the development of therapeutic tools against this re-emerging threat.

Porous polydopamine nanospheres with yolk shell-like structure to effectively remove methylene blue, bisphenol A, and tetracycline from wastewaters

A porous PDA nanoadsorbents with yolk shell-like structures was developed for effective removal of cationic dyes, EDCs, and antibiotics from water.

CORINOS. I. JWST/MIRI Spectroscopy and Imaging of a Class 0 Protostar IRAS 15398–3359

The origin of complex organic molecules (COMs) in young Class 0 protostars has been one of the major questions in astrochemistry and star formation. While COMs are thought to form on icy dust grains via gas-grain chemistry, observational constraints on their formation pathways have been limited to gas-phase detection. Sensitive mid-infrared spectroscopy with JWST enables unprecedented investigation of COM formation by measuring their ice absorption features. Mid-infrared emission from disks and outflows provide complementary constraints on the protostellar systems. We present an overview of JWST/Mid-Infrared Instrument (MIRI) Medium Resolution Spectroscopy (MRS) and imaging of a young Class 0 protostar, IRAS 15398−3359, and identify several major solid-state absorption features in the 4.9–28 μm wavelength range. These can be attributed to common ice species, such as H2O, CH3OH, NH3, and CH4, and may have contributions from more complex organic species, such as C2H5OH and CH3CHO. In addition to ice features, the MRS spectra show many weaker emission lines at 6–8 μm, which are due to warm CO gas and water vapor, possibly from a young embedded disk previously unseen. Finally, we detect emission lines from [Fe ii], [Ne ii], [S i], and H2, tracing a bipolar jet and outflow cavities. MIRI imaging serendipitously covers the southwestern (blueshifted) outflow lobe of IRAS 15398−3359, showing four shell-like structures similar to the outflows traced by molecular emission at submillimeter wavelengths. This overview analysis highlights the vast potential of JWST/MIRI observations and previews scientific discoveries in the coming years.

Post-buckling analysis of shell-like structures using an implicit dynamic time integration scheme

PurposeThis paper aims to investigate post-buckling responses of shell-like structures using an implicit conservative-decaying time integration dynamic scheme.Design/methodology/approachIn this work, the authors have proposed the use of a four-node quadrilateral flat shell finite element with drilling rotational degree of freedom within the framework of an updated Lagrangian formulation mutually with an implicit conservative-dissipative time integration dynamic scheme.FindingsSeveral numerical simulations were considered to evaluate the accuracy, robustness, stability and the capacity of the considered time integration scheme to dissipate numerical noise in the presence of high frequencies. The obtained results illustrate a very satisfying performance of the implicit conservative-dissipative direct time integration scheme conjointly with the quadrilateral flat shell finite element with drilling rotation.Originality/valueThe authors have investigated the potential of the implicit dynamic scheme to deal with unstable branches after limit points in the non-linear post-buckling response of shell structures with no need for structural damping. The capability of the studied algorithm to study buckling and post-buckling behaviour of thin shell structures is illustrated through several numerical examples.

Three-dimensional chiral morphodynamics of chemomechanical active shells

Morphogenesis of active shells such as cells is a fundamental chemomechanical process that often exhibits three-dimensional (3D) large deformations and chemical pattern dynamics simultaneously. Here, we establish a chemomechanical active shell theory accounting for mechanical feedback and biochemical regulation to investigate the symmetry-breaking and 3D chiral morphodynamics emerging in the cell cortex. The active bending and stretching of the elastic shells are regulated by biochemical signals like actomyosin and RhoA, which, in turn, exert mechanical feedback on the biochemical events via deformation-dependent diffusion and inhibition. We show that active deformations can trigger chemomechanical bifurcations, yielding pulse spiral waves and global oscillations, which, with increasing mechanical feedback, give way to traveling or standing waves subsequently. Mechanical feedback is also found to contribute to stabilizing the polarity of emerging patterns, thus ensuring robust morphogenesis. Our results reproduce and unravel the experimentally observed solitary and multiple spiral patterns, which initiate asymmetric cleavage in Xenopus and starfish embryogenesis. This study underscores the crucial roles of mechanical feedback in cell development and also suggests a chemomechanical framework allowing for 3D large deformation and chemical signaling to explore complex morphogenesis in living shell-like structures.

Immersed boundary Mindlin-Reissner 3D shell element for modeling isotropic and laminated composite shells

An immersed boundary 3D shell element is presented here that is based on Mindlin-Reissner shell theory assumptions and uses quadratic B-spline approximation for the solution. It enables mesh independent analysis wherein the surface representing the shell geometry is defined independently and not by the mesh. The shell geometry is immersed in a uniform background mesh whose elements are 3D B-spline shell elements. By making the geometric model independent of the mesh, the typical difficulties associated with mesh generation can be avoided. The quadratic 3D B-spline shell elements in the mesh can represent the displacement field as a tangent continuous piece-wise polynomial approximation. The nodes of the element have three translational and no rotational degrees of freedom. The element is formulated under small-deformation and plane stress assumptions. Constructing the element based on shell theory enables the use of effective properties to model thin fiber reinforced laminated composite shell-like structures. The element formulation and the mesh independent approach are validated against a series of common shell element benchmark problems. • Immersed boundary 3D B-spline element based on Mindlin-Reissner shell theory assumptions. • Mesh independent analysis where geometry is embedded in a uniform background mesh. • The iso-parametric quadratic B-spline shell elements are used for C 1 continuous approximation. • Step boundary method (SBM) is used for applying boundary conditions. • Immersed boundary FEM for shells is validated for isotropic and composite shells.