Shell Cross-linked Micelle Research Articles

Stimuli-Responsive Proteinosomes Based on Biohybrid Shell Cross-Linked Micelles

A new method of stimuli-responsive proteinosome fabrication with the shell cross-linked micelle as a template is reported in this research. A thermoresponsive diblock copolymer poly[di(ethylene glycol) methyl ether methacrylate]-b-poly[poly(ethylene glycol) methyl ether methacrylate-co-pyridyl disulfide methacrylamide] [PDEGMA-b-P(PEGMA-co-PDSMA)] was synthesized and self-assembled into micelles with PDEGMA cores and P(PEGMA-co-PDSMA) shells at the temperature above its lower critical solution temperature (LCST). Reduced bovine serum albumin (BSA) molecules with six thiol groups were used to cross-link the shells of the micelles by reacting with the pendant pyridyl disulfide groups on the P(PEGMA-co-PDSMA) block. At a temperature below the LCST of the polymer, the PDEGMA cores were dissolved in water, affording proteinosomes with a size of about 50 nm and capsule-like structures. The proteinosome was also thermoresponsive with a phase transition temperature at 35 °C. The fabrication of the proteinosome had no obvious influence on the structure and activity of BSA, and BSA retained most of its secondary structure and esterase-like activity. Because the BSA molecules were connected to the polymer chains through disulfide bonds, they could be released upon addition of dithiothreitol. The in vitro cell viability evaluation and the cellular uptake assay demonstrated that the proteinosome showed low toxicity to NIH 3T3 and 4T1 cells and could be internalized into the 4T1 cells.

One-Pot Synthesis of pH/Redox Responsive Polymeric Prodrug and Fabrication of Shell Cross-Linked Prodrug Micelles for Antitumor Drug Transportation.

Shell cross-linked (SCL) polymeric prodrug micelles have the advantages of good blood circulation stability and high drug content. Herein, we report on a new kind of pH/redox responsive dynamic covalent SCL micelle, which was fabricated by self-assembly of a multifunctional polymeric prodrug. At first, a macroinitiator PBYP- ss- iBuBr was prepared via ring-opening polymerization (ROP), wherein PBYP represents poly[2-(but-3-yn-1-yloxy)-2-oxo-1,3,2-dioxaphospholane]. Subsequently, PBYP- hyd-DOX- ss-P(DMAEMA- co-FBEMA) prodrug was synthesized by a one-pot method with a combination of atom transfer radical polymerization (ATRP) and a Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) reaction using a doxorubicin (DOX) derivative containing an azide group to react with the alkynyl group of the side chain in the PBYP block, while DMAEMA and FBEMA are the abbriviations of N, N-(2-dimethylamino)ethyl methacrylate and 2-(4-formylbenzoyloxy)ethyl methacrylate, respectively. The chemical structures of the polymer precursors and the prodrugs have been fully characterized. The SCL prodrug micelles were obtained by self-assembly of the prodrug and adding cross-linker dithiol bis(propanoic dihydrazide) (DTP). Compared with the shell un-cross-linked prodrug micelles, the SCL prodrug micelles can enhance the stability and prevent the drug from leaking in the body during blood circulation. The average size and morphology of the SCL prodrug micelles were measured by dynamic light scattering (DLS) and transmission electron microscopy (TEM), respectively. The SCL micelles can be dissociated under a moderately acidic and/or reductive microenvironment, that is, endosomal/lysosomal pH medium or high GSH level in the tumorous cytosol. The results of DOX release also confirmed that the SCL prodrug micelles possessed pH/reduction responsive properties. Cytotoxicity and cellular uptake analyses further revealed that the SCL prodrug micelles could be rapidly internalized into tumor cells through endocytosis and efficiently release DOX into the HeLa and HepG2 cells, which could efficiently inhibit the cell proliferation. This study provides a fast and precise synthesis method for preparing multifunctional polymer prodrugs, which hold great potential for optimal antitumor therapy.

Reduction-Degradable Shell Cross-Linked Micelle with pH-Responsive Cores Prepared via Click Chemistry

A well-defined poly [(ethylene glycol)-block-2-(dimethylamino) ethyl methacrylate-block-2-(diethylamino) methacrylate] (PEG-b-DMA-b-DEA) triblock copolymer was synthesized via atom transfer radical polymerization (ATRP) by successively polymerization of DMA and DEA monomers using a PEG-based macroinitiator, and obtained copolymer was then converted to be PEG-b-P(DMA-co-QDMA)-b-PDEA copolymer with “clickable” moieties in the middle block by the quaternization with propargyl bromide. Those copolymers prepared were characterized by proton Nuclear Magnetic Resonance (1H NMR) and Gel Permeation Chromatography (GPC), and its self-assembly behavior and subsequently fixation with bis-(azidoethyl) disulfide via click chemistry resulting reduction-sensitive shell-cross-linked (SCL) micelle in purely aqueous solution were investigated by Transmission Electron Microscopy (TEM) and Dynamic Light Scattering (DLS). The results show the micellar structure could be effectively cross-linked via click chemistry and also be dissociated at reduction condition, which may realize it's potential application as novel drug delivery carriers.

Effect of shell-crosslinking of micelles on endocytosis and exocytosis: acceleration of exocytosis by crosslinking.

Uptake of drug-loaded micelles by tumour cell lines can be the crucial step in the creation of an efficient drug delivery system. Crosslinking of micelles has increasingly been proposed as a pathway to create stable nanoparticles. So far, little is known how crosslinking can affect the interaction of these nanocarriers with cells. The aim of this study is therefore to investigate the effect of crosslinking on exo- and endocytosis. RAFT (reversible addition fragmentation chain transfer) polymerization has been used to synthesize the block copolymer poly(methyl methacrylate)-block-poly(polyethylene glycol methyl ether methacrylate) PMMA-b-P(PEGMEMA), which was subsequently self-assembled into micelles of 20 nm. For comparison, the micelles were shell-crosslinked by incorporating methacrylic acid into the shell, which was used as a reactive group for crosslinking with 1,8-diaminooctane. The hydrodynamic diameter of the shell-crosslinked micelle was with 25 nm similar to that of the non-crosslinked one. Endocytosis of both micelles was significantly reduced by the presence of NaN3 or at 4 °C suggesting an energy dependent process. The internalization pathways of the block copolymer micelles in OVCAR-3 cells were elucidated using endocytosis inhibitors. Both nanoparticles, micelles and shell-crosslinked micelles, were internalized by caveolae mediated endocytosis while clathrin mediated endocytosis did not play a noticeable role. Shell-crosslinking therefore did not have an effect on endocytosis. However, a considerable difference was found in the exocytosis of both particles. While the micelle was lodged inside the cell for an extended period of time with less than 3% released in two hours, the shell-crosslinked micelle quickly exited the OVCAR-3 cells (25% in two hours). For comparison, a small molecule (Lucifer yellow) was found to be only marginally faster than the crosslinked micelles (40% in 2 h). These results could have implications on the use polymer-drug conjugates or drug carriers where the drug needs to be released before the polymer undergoes exocytosis.

Shell Cross‐linking of Cyclodextrin‐Based Micelles via Supramolecular Chemistry for the Delivery of Drugs

A block copolymer based on poly(N-isopropyl acrylamide) (PNIPAAm) and a block with a statistical distribution of poly(2-hydroxyethyl acrylate) (PHEA) and repeating unit with carrying β-cyclodextrin was prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization and click reaction. Addition of poly(2-hydroxyethyl acrylate-s-adamantylmethyl acrylate) P(HEA(17) -s-AdMA(7) ) above the LCST of the block copolymer led to capture of the micelle structure of 36 nm against disassembly. The drug- (albendazole) loaded supramolecular assembly, which was fixed via host-guest complexation between β-cyclodextrin and adamantane, was then tested as a drug carrier. Cell viability studies using human ovarian carcinoma cell line (OVCAR-3) cell lines show a higher toxicity of the shell cross-linked micelle compared with the free block copolymer.

Fabrication of multifunctional shell cross-linked micelles for targeting drug release

Thermosensitive amphiphilic poly(N-acroyloxysuccinimide)-b-poly(N-isopropylacrylamide)-b-poly(e-caprolactone) triblock copolymer was synthesized via the combination of reversible addition fragmentation chain transfer and ring-opening polymerization techniques. Shell cross-linked micelle (SCL) was further developed by the addition of cystamine as a di-functional cross-linker into the micellar solution. The persistence of regularly spherical shape against media change demonstrated locked micellar structure resulting from sufficient shell cross-linking. The lower critical solution temperature of the resulting SCL micelles was around 38 °C. The in vitro drug release study was carried out to illustrate the temperature-responsive drug release behaviors. To enhance the internalization to tumor cells, transferring (Tf) was further conjugated to the SCL micelles, and endocytosis experiments further confirmed the efficient uptake of Tf-SCL micelles by tumor cells, indicating that the Tf-SCL micelles would be a promising candidate for tumor-targeted drug delivery.

Preparation of Novel Ferrocene-Based Shell Cross-Linked Thermoresponsive Hybrid Micelles with Antitumor Efficacy

The shell cross-linked (SCL) thermoresponsive hybrid poly(N-isopropylacrylamide-co-aminoethyl methacrylate)-b-polymethyl methacrylate (P(NIPAAm-co-AMA)-b-PMMA) micelle consisting of a cross-linked thermoresponsive hybrid shell and a hydrophobic core domain was fabricated via a two-step process: micellization of P(NIPAAm-co-AMA)-b-PMMA in aqueous solution followed by cross-linking of the hydrophilic shell layer via the amidation reaction between the amine groups of AMA units and the carboxylic acid functions of 1,1'-ferrocenedicarboxylic acid. The SCL micelle showed reversible dispersion/aggregation in response to the temperature cycles through the lower critical solution temperature (LCST) of the thermoresponsive hybrid shell at around 36 degrees C, observed by turbidity measurements and dynamic light scattering (DLS). Besides the usage as an inorganic difunctional cross-linker, the inorganic ferrocene segment further endowed the SCL hybrid micelle with the antitumor efficacy, namely, the resulting SCL micelle exhibited a remarkable cytotoxic effect for HeLa cells with a very low IC50. The results showed that the SCL hybrid micelle developed in this study could be potentially used as an antitumor agent, which is unique compared to the conventional tumor therapy by using the antitumor drug loaded in the micellar core.

Synthesis and characterisation of new shell cross-linked micelles with amine-functional coronas

Shell cross-linked (SCL) micelles with amine-functional coronas have been constructed in aqueous solution by exploiting the micellar self-assembly of new thermo-responsive ABC triblock copolymers. These copolymers were prepared via atom transfer radical polymerisation (ATRP) in convenient one-pot syntheses and comprised a thermo-responsive core-forming poly(propylene oxide) [PPO] block, a cross-linkable central poly(glycerol monomethacrylate) [GMA] block and an amine-functional outer block based on either poly(2-(dimethylamino)ethyl methacrylate) [DMA] or poly([2-(methacryloyloxy)ethyl]trimethyl ammonium chloride) [QDMA]. DMF GPC analysis indicated an M n of 17,700 and an M w/ M n of 1.46 for the PPO–PGMA–PDMA triblock copolymer. The DMA residues of the PPO–PGMA–PDMA triblock copolymer were reacted with methyl iodide to prepare copolymers with differing degrees of quaternisation. Each triblock copolymer dissolved molecularly in aqueous solution at 5 °C and formed micelles with amine-functional coronas above a critical micelle temperature (CMT) of around 12 °C, which corresponded closely to the cloud point of the PPO macro-initiator. Cross-linking of the GMA residues in the inner shell using divinyl sulfone produced SCL micelles that remained intact at 5 °C, i.e. below the cloud point of the core-forming PPO block. Aqueous electrophoresis studies confirmed that these SCL micelles had considerable cationic surface charge, as expected. The cationic SCL micelles were adsorbed onto a near-monodisperse anionic silica sol, which was used as a model colloidal substrate. Thermogravimetric analyses indicated SCL micelle mass loadings of 6.1–15.5 wt.%, depending on the initial micelle concentration. Aqueous electrophoresis studies confirmed that surface charge reversal occurred on adsorption of the SCL micelles and scanning electron microscopy studies revealed the presence of SCL micelles on the silica particles.

Drug release behavior of poly(ε-caprolactone)-b-Poly(acrylic acid) Shell Crosslinked Micelles below the Critical Micelle Concentration

To explore the potential of shell crosslinked micelle (SCM) as a drug carrier, the drug release behavior of poly(e-caprolactone)-b-poly(acrylic acid) (PCL-b-PAA) SCMs was investigated. PCL-b-PAA was synthesized by ring opening polymerization of e-caprolactone and atom transfer radical polymerization oftert-butyl acrylate, followed by selective hydrolysis oftert-butyl ester groups to acrylic acid groups. The resulting amphiphilic polymer was used to prepare SCMs by crosslinking of PAA corona via amidation chemistry. The drug release behavior of the SCMs was studied, using pyrene as a model drug, and was compared with that of non-crosslinked micelles, especially below the critical micelle concentration (CMC). When the shell layers were crosslinked, the drug release behavior of the SCMs was successfully modulated at a controlled rate compared with that of the non-crosslinked micelles, which showed a burst release of drug within a short time.

Synthesis and Characterization of Shell Cross-Linked Micelles with Hydroxy-Functional Coronas: A Pragmatic Alternative to Dendrimers?

Shell cross-linked (SCL) micelles with hydroxy-functional coronas have been constructed in aqueous solution by exploiting the micellar self-assembly behavior of a new thermoresponsive ABC triblock copolymer. This copolymer was prepared via atom transfer radical polymerization in a convenient one-pot synthesis and comprised a thermoresponsive core-forming poly(propylene oxide) (PPO) block, a cross-linkable central poly(2-(dimethylamino)ethyl methacrylate) (DMA) block, and a hydroxy-functional outer block based on poly(glycerol monomethacrylate) (GMA). DMF GPC analysis confirmed a unimodal molecular weight distribution for the PPO-PDMA-PGMA triblock copolymer precursor, with an M(n) of 12 100 and a polydispersity of approximately 1.26. This copolymer dissolved molecularly in aqueous solution at 5 degrees C but formed micelles with hydroxy-functional coronas above a critical micelle temperature of around 12 degrees C, which corresponded closely to the cloud point of the PPO macroinitiator. Cross-linking of the DMA residues using 1,2-bis(2-iodoethoxy)ethane produced SCL micelles that remained intact at 5 degrees C, i.e., below the cloud point of the core-forming PPO block. Dynamic light scattering studies confirmed that the SCL micelle diameter could be varied depending on the temperature employed for cross-linking: smaller, more compact SCL micelles were formed at higher temperatures, as expected. Since cross-linking involved quaternization of the DMA residues, the SCL micelles acquired cationic surface charge as judged by aqueous electrophoresis studies. These cationic SCL micelles were adsorbed onto near-monodisperse anionic silica sols, which were used as a model colloidal substrate. Thermogravimetric analyses indicated a SCL micelle mass loading of 2.5-4.4%, depending on the silica sol diameter and the initial micelle concentration. Aqueous electrophoresis measurements confirmed that surface charge reversal occurred after adsorption of the SCL micelles, and scanning electron microscopy studies revealed a uniform coating of SCL micelles on the silica particles.

Nanocages Derived from Shell Cross-Linked Micelle Templates

Nanocages Derived from Shell Cross-Linked Micelle Templates