Sewage Sludge Research Articles

Effect of thermochemical treatment of sewage sludge on its phosphorus leaching efficiency: Insights into leaching behavior and mechanism

Thermochemical conversion, including hydrothermal processing, pyrolysis and incineration, has become a promising technology for sewage sludge (SS) treatment and disposal. Furthermore, acid leaching is considered as an effective method to recover phosphorus (P) from SS and its thermochemical treatment products. This study has investigated the potential of P reclamation from SS and its thermochemical derivatives, including hydrochar (HC), biochar (BC), and SS incinerated ash (SA). Comparative analyses of physicochemical properties of these derivatives revealed a decrease in hydroxyl and aromatic groups and an increase in aliphatic and oxygen-containing functional groups in HC and BC. Leaching experiments using 1 M sulfuric acid (H2SO4) and 1 M oxalic acid (C2H2O4) suggested that H2SO4 slightly outperformed C2H2O4 in terms of P leaching efficiency. HC achieved 79.1 % optimal leaching efficiency in 60 min using H2SO4, while BC, SS, and SA required 360 min to achieve comparable efficiency. SS and BC reached optimal leaching efficiency at 74.1 % and 76.2 % in H2SO4, while SA achieved 80.9 % in C2H2O4. Importantly, HC and SA are more favorable for P extraction using acid leaching, whereas BC tends to be a potential P carrier. Time-dependent kinetics revealed a two-stage leaching process, i.e., fast and slow reaction stages. Shrinking core model indicates product layer diffusion as the primary rate-limiting step in both stages. Overall, these fundamental insights play an important role in practical P recovery through acid leaching of SS derived residues after thermochemical treatment.

Succession from acetoclastic to hydrogenotrophic microbial community during sewage sludge anaerobic digestion for bioenergy production.

To assess microbial dynamics during anaerobic digestion (AD) of sewage sludge (SWS) from a municipal Wastewater Treatment Plant (WWTP), a Biochemical Methane Potential (BMP) assay at 37°C under mono-digestion conditions was conducted. Utilizing the Illumina MiSeq platform, 16S ribosomal RNA (rRNA) gene sequencing unveiled a core bacterial community in the solid material, showcasing notable variations in profiles. The research investigates changes in microbial communities and metabolic pathways to understand their impact on the efficiency of the digestion process. Prior to AD, the relative abundance in SWS was as follows: Proteobacteria > Bacteroidota > Actinobacteriota. Post-AD, the relative abundance shifted to Firmicutes > Synergistota > Proteobacteria, with Sporanaerobacter and Clostridium emerging as dominant genera. Notably, the methanogenic community underwent a metabolic pathway shift from acetoclastic to hydrogenotrophic in the lab-scale reactors. At the genus level, Methanosaeta, Methanolinea, and Methanofastidiosum predominated initially, while post-AD, Methanobacterium, Methanosaeta, and Methanospirillum took precedence. This metabolic transition may be linked to the increased abundance of Firmicutes, particularly Clostridia, which harbor acetate-oxidizing bacteria facilitating the conversion of acetate to hydrogen.

Prioritizing industrial wastes and technologies for bioenergy production: Case study

Energy supply stability in the industrial sector is crucial to maintain operational efficiency and avoiding costly disruptions. In the face of pressing environmental challenges, transitioning to sustainable, efficient, and eco-friendly energy sources is imperative. This study aims to assess the potential of industrial waste for bioenergy production in Khorasan Province, Iran, addressing the research gap of developing a comprehensive framework of criteria that was lacking in previous studies. Employing a combined technology and material assessment methodology, the research began with the collection and analysis of questionnaires to identify and weight critical criteria using Shannon Entropy and expert insights. The Additive Ratio Assessment method was then used to rank various types of industrial waste and technologies according to established value criteria. The Findings reveal that anaerobic digestion of organic waste emerges as the most viable bioenergy solution with an 85 % desirability score, followed by anaerobic digestion of sewage sludge and gasification of plastic waste, scoring 77.31 % and 69.41 %, respectively. The innovative aspect of this study is the development and implementation of five novel evaluation criteria, including process temperature, technology lifetime, production cost, waste collection cost, and waste separation cost, which have not been previously applied to the assessment of industrial waste for renewable energy production, especially in developing countries.

Investigation of Sewage Sludge–Derived Biochar for Enhanced Pollutant Adsorption: Effect of Particle Size and Alkali Treatment

Investigation of Sewage Sludge–Derived Biochar for Enhanced Pollutant Adsorption: Effect of Particle Size and Alkali Treatment

Long-Term Amendment with Sewage Sludge: Effects on Nutrient Value and Trace-Metal Content in Different Parts of Maize Plants

Agricultural soils play a key role in the achievement of a circular nutrient economy. The use of sewage sludges as fertilizers is important for such an achievement, assisting in the maintenance of soil health and nutritional crop value. This study was established, after 23 years of a fertilization experiment, in calcareous soil under a maize monoculture. The treatments included mineral fertilization as a control (MIN, 225 kg N ha−1) and two sludge treatments, where doses followed a threshold sludge nitrogen criterion (SNC, 170 kg org-N ha−1) or a threshold soil phosphorus criterion (SPC; when the soil Olsen-P value exceeded 40–60 kg P ha−1, the sludge application was stopped). A detailed study was performed on Cd, Cu, F, Mn, Pb, and Zn soil extractable with diethylenetriaminepentaacetic acid (DTPA), as well as the nutrient and heavy metal concentration of different fractions of the maize plant (grain, cob, and the rest of the plant). Extractions were also quantified. No biomass-yield differences were observed in the different parts of the maize plant in the year of sampling. Sludges increased the soil DTPA extraction of Cd, Cu, Fe, and Zn and diminished Mn extraction, without differences in extractable Pb. The SNC, when compared with MIN, showed increased P cob concentrations, and in grain, it showed increased Fe, Cr, and Co concentrations. The SPC figures of the studied parameters were, in general, between both treatments (MIN and SNC), although Cr extractions in grain diminished vs. SNC. Based on the results, the SPC can be recommended as it also avoids excessive available-P build up.

Correction to: Pyrolysis or hydrothermal carbonisation for anaerobic-digested sewage sludge? A comparison of pyrochar and hydrochar stucture and stability

Correction to: Pyrolysis or hydrothermal carbonisation for anaerobic-digested sewage sludge? A comparison of pyrochar and hydrochar stucture and stability

Impact of thermal hydrolysis on VFA-based carbon source production from fermentation of sludge and digestate for denitrification: experimentation and upscaling implications

Stricter nutrient discharge limits at wastewater treatment plants (WWTPs) are increasing the demand for external carbon sources for denitrification, especially at cold temperatures. Production of carbon sources at WWTP by fermentation of sewage sludge often results in low yields of soluble carbon and volatile fatty acids (VFA) and high biogas losses, limiting its feasibility for full-scale application. This study investigated the overall impact of thermal hydrolysis pre-treatment (THP) on the production of VFA for denitrification through the fermentation of municipal sludge and digestate. Fermentation products and yields, denitrification efficiency and potential impacts on methane yield in the downstream process after carbon source separation were evaluated. Fermentation of THP substrates resulted in 37–70 % higher soluble chemical oxygen demand (sCOD) concentrations than fermentation of untreated substrates but did not significantly affect VFA yield after fermentation. Nevertheless, THP had a positive impact on the denitrification rates and on the methane yields of the residual solid fraction in all experiments. Among the different carbon sources tested, the one produced from the fermentation of THP-digestate showed an overall better potential as a carbon source than other substrates (e.g. sludge). It obtained a relatively high carbon solubilisation degree (39 %) and higher concentrations of sCOD (19 g sCOD/L) and VFA (9.8 g VFACOD/L), which resulted in a higher denitrification rate (8.77 mg NOx-N/g VSS∙h). After the separation of the carbon source, the solid phase from this sample produced a methane yield of 101 mL CH4/g VS. Furthermore, fermentation of a 50:50 mixture of THP-substrate and raw sludge produced also resulted in a high VFA yield (283 g VFACOD/kg VSin) and denitrification rate of 8.74 mg NOx-N/g VSS∙h, indicating a potential for reduced treatment volumes. Calculations based on a full-scale WWTP (Käppala, Stockholm) demonstrated that the carbon sources produced could replace fossil-based methanol and meet the nitrogen effluent limit (6 mg/L) despite their ammonium content. Fermentation of 50–63 % of the available sludge at Käppala WWTP in 2028 could produce enough carbon source to replace methanol, with only an 8–20 % reduction in methane production, depending on the production process. Additionally, digestate production would be sufficient to generate 81 % of the required carbon source while also increasing methane production by 5 % if a portion of the solid residues were recirculated to the digester.

Sewage sludge fertilization affects microbial community structure and its resistome in agricultural soils

Global sewage sludge production is rapidly increasing, and its safe disposal is becoming an increasingly serious issue. One of the main methods of municipal sewage sludge management is based on its agricultural use. The wastewater and sewage sludge contain numerous antibiotic resistance genes (ARGs), and its microbiome differs significantly from the soil microbial community. The aim of the study was to assess the changes occurring in the soil microbial community and resistome after the addition of sewage sludge from municipal wastewater treatment plant (WWTP) in central Poland, from which the sludge is used for fertilizing agricultural soils on a regular basis. This study used a high-throughput shotgun metagenomics approach to compare the microbial communities and ARGs present in two soils fertilized with sewage sludge. The two soils represented different land uses and different physicochemical and granulometric properties. Both soils were characterized by a similar taxonomic composition of the bacterial community, despite dissimilarities between soils properties. Five phyla predominated, viz. Planctomycetes, Actinobacteria, Proteobacteria, Chloroflexi and Firmicutes, and they were present in comparable proportions in both soils. Network analysis revealed that the application of sewage sludge resulted in substantial qualitative and quantitative changes in bacterial taxonomic profile, with most abundant phyla being considerably depleted and replaced by Proteobacteria and Spirochaetes. In addition, the ratio of oligotrophic to copiotrophic bacteria substantially decreased in both amended soils. Furthermore, fertilized soils demonstrated greater diversity and richness of ARGs compared to control soils. The increased abundance concerned mainly genes of resistance to antibiotics most commonly used in human and animal medicine. The level of heavy metals in sewage sludge was low and did not exceed the standards permitted in Poland for sludge used in agriculture, and their level in fertilized soils was still inconsiderable.

Microplastics and nanoplastics in soil: Sources, impacts, and solutions for soil health and environmental sustainability.

The present review discusses the growing concern of microplastics (MPs) and nanoplastics (NPs) in soil, together with their sources, concentration, distribution, and impact on soil microorganisms, human health, and ecosystems. MPs and NPs can enter the soil through various pathways, such as agricultural activities, sewage sludge application, and atmospheric deposition. Once in the soil, they can accumulate in the upper layers and affect soil structure, water retention, and nutrient availability. The presence of MPs and NPs in soil can also have ecological consequences, acting as carriers for pollutants and contaminants, such as heavy metals and persistent organic pollutants. Additionally, the leaching of chemicals and additives from MPs and NPs can pose public health risks through the food web and groundwater contamination. The detection and analyses of MPs and NPs in soil can be challenging, and methods involve spectroscopic and microscopy techniques, such as Fourier-transform infrared spectroscopy and scanning electron microscopy. To mitigate the presence and effects of MPs and NPs in soil, it is essential to reduce plastic waste production, improve waste management practices, and adopt sustainable agricultural practices. Effective mitigation measures include implementing stricter regulations on plastic use, promoting biodegradable alternatives, and enhancing recycling infrastructure. Additionally, soil amendments, such as biochar and compost, can help immobilize MPs and NPs, reducing their mobility and bioavailability. This review article aims to provide a comprehensive understanding of these emerging environmental issues and identify potential solutions to alleviate their impact on soil health, ecosystem functioning, and community health.

Occurrence and risk assessment of p-phenylenediamines and their quinones in aquatic environment: From city wastewater to deep sea

p-Phenylenediamines (PPDs) and PPD-derived quinones (PPD-Qs) have been considered emerging pollutants recently. Their available data on sediment and sewage sludge are limited, especially the ecological risks. Here, typical PPDs and PPD-Qs were measured in the sludge of wastewater treatment plants and surface sediment of a developed river basin (including reservoirs, estuaries, and rivers) and deep-sea troughs. The total concentrations of PPDs (∑PPD) were highest in sludge (range: 9.06–248 ng g−1), followed by surface sediment of the Dongjiang River basin, China (3.33–85.3 ng g−1), and lowest in sediment of the Okinawa Trough (0.01–7.46 ng g−1). The median value of ∑PPD in surface sediment of rivers (9.54 ng g−1) was higher than those in reservoirs (4.28 ng g−1) and estuaries (5.26 ng g−1). N-(1,3-Dimethylbutyl)-N′-phenyl-p-phenylenediamine (6PPD) was the major congener in all samples, accounting for over 60 % of ∑PPD. For quinones, 6PPD-Q and IPPD-Q were frequently detected in sludge, only trace 6PPD-Q was detected in the sediment of estuaries (nd-0.62 ng g−1) and rivers (nd-5.24 ng g−1), and both of them were absent from the sediment of the Okinawa Trough. The occurrence of PPDs in the trough may be the in-situ release of microplastics, and due to the low-light and weak alkaline conditions of deep-sea water, quinones may hardly photodegrade from PPDs. The PPD concentrations in sludge were positively correlated with local GDP, and the annual PPD emission from sludge will exceed 1370 kg in China. The results of ecological risk assessments indicated low risks for PPDs in sludge-amended soil, median risks for several PPDs in river sediment, but median to high risks for 6PPD-Q contamination sludge-amended soil. For the first time, we explored the potential environmental risk of PPDs and related quinones in sludge used as a soil conditioner.

Robust magnetic vivianite recovery from digested sewage sludge: Evaluating resilience to sludge dry matter and particle size variations

Phosphorus recovery via vivianite extraction from digested sludge has recently gained considerable interest. The separation of vivianite was demonstrated earlier at the pilot scale, and operational parameters were optimized. In this study, we tested the robustness of this technology by changing the sludge characteristics, such as dry matter, and via that, sludge viscosity, and vivianite particle size. It was proven that the main factor influencing recovery was the concentration of vivianite in the feed. The technology can extract vivianite even when the sludge has higher dry matter (1.8% - 3.3%) and, therefore, higher viscosity. Smaller vivianite sizes (< 10 µm) can still be recovered but at a lower rate. This made magnetic separation applicable to a wide range of wastewater treatment plants.

The role elucidating of EPS in thermal hydrolysis and nitrogen conversion of sewage sludge during hydrothermal carbonization process, and its effect on hydrochar's properties

Hydrothermal carbonization (HTC) was conducted to observe the effect of extracellular polymeric substances (EPS) structure on the nitrogen migration mechanism during the HTC process. The denitrification efficiency of activated sewage sludge (ASS) decreases with an increase in EPS stripping intensity. Loosely and tightly bound extracellular polymers diminish the denitrification effectiveness by inhibiting the hydrolysis of nitrogen-containing organic compounds and protecting the cell structure, respectively. Intracellular nucleic acids and proteins generate stable N-containing species, such as heterocyclic-N and quaternary-N, which are unfavorable for deep denitrification. In general, nitrogen removal is more effective outside the cell than inside. Deep destruction of EPS eliminated a considerable number of N-containing components, and the N/C value of hydrochar at 180 °C without cell membrane protection was 0.06, which dropped to half that of ASS (0.11). This study revealed the influence of EPS structure on nitrogen migration in hydrothermal environment and provided significant insights for the preparation of clean solid fuels.

Effect of microwave and ultrasonic pre-treatments on anaerobic co-digestion of orange wastes and municipal sewage sludge: A case study

The application of orange wastes (OW) in anaerobic digestion process still constitutes a technological challenge. One of the possibilities to overcome this issue is application of pre-treatment strategy. In this study, the effect of microwave (MW) and ultrasonic (US) pre-treatments on OW and sewage sludge (SS) co-digestion was examined. Firstly, the selection of optimal pre-treatment conditions in terms of solubilisation and generation of inhibitors (phenol and limonene contents) was conducted. For MW, irradiation time of 10 min and specific energy input of 28 089 kJ/kgTS were chosen as optimal. For US pre-treatment, specific energy input of 8914 kJ/kgTS and time of 20 min were adopted. Then, the mesophilic anaerobic co-digestion in batch mode was performed. However, neither of the two proposed pre-treatments had a significant impact on methane production, as compared to the untreated sample.

Three birds with one stone: Sewage sludge deep-drying in 1 hour using secondary aluminum ash to fabricate bricks

Due to the high moisture, strong hydrophilicity, and hard compressibility of sewage sludge (SS), it is difficult to realize the high-efficiency drying. Herein, a novel SS drying technology was developed to quickly and deeply reduce the moisture of SS from 75.6% to 38.5% in 1 h. During the process, secondary aluminum ash (SAA), a solid waste, was added to SS and acted as skeletons to form plenty of channels. Subsequently, NaOH was added and reacted with SAA to produce a lot of heat, resulting in a rapid temperature rise of the system from 20 to 105°C in 60 s. The heat could effectively remove water from these channels, which could be proved by the T1-T2 maps of in-site Low-Field 1H nuclear magnetic resonance. In addition, the extracellular polymeric substances were decomposed by SAA/NaOH successfully, and thus the SS became hydrophobic, favoring the drying. Finally, the dried SS could be used to fabricate unburned bricks. Thus, this work provides a promising method to realize the rapid SS deep drying and high-efficiency utilization of SAA and dried SS.

Enhancing energy yield and reducing environmental impact through co-hydrothermal carbonization of undehydrated sewage sludge and fungus bran

This study presents a sustainable waste management method through co-hydrothermal carbonization (Co-HTC) of undehydrated sewage sludge (SS) and fungus bran (FB), effectively eliminating the need for additional water. The effects of the reaction severity factor (SF: 0.1, 0.2, and 0.3), the FB mixed ratio (FBMR: 0 %, 10 %, and 20 %), and the proportion of citric acid promoting agent (CAPA: 0 %, 10 %, and 20 %) on HTC performance were systematically investigated. The process was optimized for maximum energy yield (EY) using response surface methodology (RSM). The properties of the produced hydrochar, along with its EY and environmental impact, were thoroughly assessed. Results demonstrated that under optimal conditions (SF: 0.1, FBMR: 20 %, and CAPA: 20 %), EY increased by 45.84 % compared to hydrochar derived from dried SS. The dehydration and decarboxylation processes led to lower H/C and O/C ratios, producing hydrochar with reduced sulfur and nitrogen content, while the contents of alkali and alkaline earth metals, particularly calcium, increased. Furthermore, the optimized Co-HTC process had minimal environmental impact. In contrast to traditional HTC, which requires significant freshwater and involves high costs for SS drying, our innovative approach using undehydrated SS offers a cost-effective and environmentally friendly solution, paving the way for industrial-scale Co-HTC and sustainable waste valorization.

Bio-transformation of poultry litter and activated sewage sludge to produce biomixtures for the remediation of water polluted with pesticides

The aim of this study was to formulate novel biomixtures with the ability to dissipate globally used pesticides. For this, an effective stabilization of two wastes, poultry litter and activated sewage sludge, was achieved through a combination of composting and vermicomposting, with the aid of the earthworm Eisenia fetida. Hence, two different mixtures were prepared combining the wastes with and without the addition of sewage sludge, and their physicochemical and microbiological characterization was examined during both processes. Earthworms reproduction was promoted by more than fourteen times the initial number of individuals introduced. This step made it possible to obtain substrates rich in organic matter, stable and non-pathogenic. The resulting vermicomposted substrates (V–C1 and V–C2) were used to produce two different biomixtures with wheat stubble (WS) and soil (S): SWSV-C1 and SWSV-C2, and they were tested for the remediation of a solution of five pesticides (2,4-D, cypermethrin, imidacloprid, acetochlor and dimethoate) in a 119-days assay. Comparisons were made with a WS-only biomixture (SWS) and a soil control. All biomixtures were more successful in dissipating the pesticides than soil; 2,4-D, dimethoate, and acetochlor degradation reached more than 99% in the three biomixtures after 28–56 days of assay. Biomixtures containing either vermicomposts acted faster than SWS, particularly for 2,4-D, dimethoate and cypermethrin. The total microbial activity was found to be higher in the two biomixtures containing vermicompost, which can be linked to their enhanced performance in the degradation of pesticides. Although the germination of Lactuca sativa proved that neither of the three spent biomixtures were phytotoxic at the end (germination index >60%), only SWSV-C1 and SWSV-C2 proved to be safe for the survival of E. fetida. This work confirms that vermicompost improves the success of biomixtures, not only in terms of pesticide removal, but also providing non-toxic spent biomixtures.

Use of aqueous liquor from digested sludge pyrolysis for biogas production: characterization, toxicity assessment, and rate-limiting step determination

This study assessed the characteristics and toxicity of aqueous pyrolytic liquid (APL) derived from digested sewage sludge on anaerobic digestion (AD) and determined its rate-limiting step. Digested sewage sludge was pyrolyzed at multiple temperatures (350–650 °C) and moisture levels (0–40.4 %), resulting in APLs with varying AD toxicities. APL 350 °C-0 % showed the least toxicity, whereas APL 650 °C-40.4 % exhibited the greatest toxicity. Glucose (GL) and sodium acetate (SA) were introduced to elucidate the rate-limiting steps. SA, but not GL, enhanced APL conversion to CH4. And volatile fatty acid lack was observed in treatments without SA addition. This suggested that acidification was the primary rate-limiting step. This finding was confirmed using the modified Gompertz model: SA considerably improved the maximum methane production rate, whereas GL did not. Insights gained from this research clarified the feasibility and potential of AD for APL utilization and conversion.

Bioenergy recovery from waste engine oil through anaerobic co-digestion with sewage sludge: Effects of total solids and inoculum to substrate ratio

ABSTRACT Considering their various benefits, such as pollution control, waste management, and eco-friendly energy production, much more attention is currently devoted to utilization of some urban, industrial, and agricultural wastes in the course of anaerobic digestion (AD) across the world. From this perspective, the present study aimed to evaluate prospects of biogas production from waste engine oil (WEO) through its co-digestion (CoD) with activated municipal sewage sludge (SS). In order to do this, AD was carried out in batch-mode 1-L reactors at a mesophilic temperature of 35°C, with consideration for total solids (TS) levels of 3% and 6% and inoculum-to-substrate ratios (ISRs = 0.5, 1, and 2), which were based on volatile solids (VS), over a period of 85 days. The treatment with TS = 6% and ISR = 2, or 6874 mL, showed the maximum biogas generation rate, according to the trials, with TS and VS removal values of 23% and 28%, respectively. As well, reactor monitoring during AD revealed that the parameters of potential of hydrogen (pH) and alkalinity recovered following acidification after 7 days, and the relatively low efficiency of the given process (0.233 m3/kg-VSadded) was attributed to the highly complicated and difficult-to-degrade structure of WEO. The kinetics of anaerobic CoD consistently established that the maximum cumulative biogas production rate (Rm = 5.61 m3/kg-VSadded.d) and the shortest biogas production lag time (λ = 0) occurred when there were TS = 3% and 6%, in that order. Moreover, kinetic models, i.e. the Modified Gompertz and Logistic Function ones, were found to be in very good agreement with experimental data, whereas the first-order model failed to offer ideal predictions of biogas production trend in most cases.

Mechanical, freeze-thaw resistance and heavy metals leaching properties of alkali-activated recycled concrete powder solidified sludge

Solidified sludge was an efficient method to consume the large amount of sludge, which can be used as the subgrade filler in road engineering. However, the traditional solidified materials, such as cement and lime, consumed a large amount of natural resources and increased carbon emissions. This study used the alkali-activated recycled concrete powder (ARCP) to solidify sludge, which could be used as a potential subgrade stabilization filler. The optimal factors of ARCP were firstly determined by orthogonal test according to the compressive strength. Then the influences of different ARCP dosage, sludge moisture content and curing method on the mechanical properties, freeze-thaw resistance and heavy metals immobilization of the ARCP solidified sludge (ARCPS) were investigated. At last, microstructures of ARCPS were analyzed by SEM, XRD and TG-DTG tests. The experimental results demonstrated that the optimal mixture for ARCP: the silicate modulus of 1, liquid-solid ratio of 0.48 and calcium hydroxide content of 3 %. The solidified process by ARCP improved the mechanical properties and freeze-thaw resistance of ARCPS greatly. The 7 d unconfined compressive strength of ARCPS could reach 1305–2033 kPa when the sludge moisture content was 15 %, which meet the requirement of 500 kPa from the Chinese standard. The frost heaving rates of ARCPS were between non-frost heaving and mild frost heaving. The sludge moisture content was the most important factor affecting the freeze-thaw resistance of ARCPS. The properties of ARCPS were further improved after carbonation curing. The leaching mass concentration of heavy metals decreased significantly after the solidification of sludge. After 5 freeze-thaw cycles, the heavy metal leaching concentration increased but was still met the requirement of standards. SEM results showed that the surface of carbonated ARCPS was covered by dense scale-like carbonation products, which further enhanced the strength and freeze-thaw resistance of ARCPS. The results can be used to guide the application of sludge and ARCP in construction.

Studies of Wastewater Management through Microbiology of Constructed Wetland

Constructed wetlands are distinguished by certain environmental factors that let many physical and biological processes to occur simultaneously. This is the outcome of a particular habitat that supports the development of microbes and hydrophytes, which are plants that can live in aquatic and semiaquatic environments and are capable of anaerobic, anaerobic, and aerobic environments. Their combined activity amplifies the processes of oxidation and reduction, which are in charge of eliminating and holding onto contaminants. Sorption, sedimentation, and absorption all aid in these processes. Treatment wetland systems have been employed in community management for more than 50 years because of these benefits. Constructed wetlands are becoming more and more popular for treating or pre-treating many kinds of industrial wastewater because of their benefits, cheap operating costs, and high removal efficiency. The paper examines how these facilities are being used worldwide to treat industrial wastewater. With a focus on particular and distinctive pollutants from industries, the conditions of usage and efficacy of pollutants removal from wastewater that degrades quickly and slowly were described. The article addressed the use of subsurface horizontal flow beds for the treatment of wastewater from various industrial processes, including the manufacturing of paper, oil, and coffee, as well as the food sector, which includes wineries and distilleries. Constructed wetlands are used in Poland to treat wastewater and milk processing sludge on a pilot size or to dewater sewage sludge generated in municipal wastewater treatment plants that handle household sewage with around 40% of wastewater from the dairy and fish industries. Constructed wetlands provide the so-called ecosystem function in addition to an adequate degree of treatment in every instance.