Distribution Of Selenium Research Articles

Selenium-Containing Organic Fertilizer Application Affects Yield, Quality, and Distribution of Selenium in Wheat.

This study was designed to investigate the effect on wheat yield of applying organic fertilizers (OF) with five different selenium (Se) concentrations. The mineral nutrients, cadmium (Cd) content, and the distribution of Se in wheat plants were also measured. The results showed that wheat yields reached a maximum of 9979.78 kg ha-1 in Mengcheng (MC) County and 8868.97 kg ha-1 in Dingyuan (DY) County, Anhui Province, China when the application amount of selenium-containing organic fertilizer (SOF) was up to 600 kg ha-1. Among the six mineral nutrients measured, only the calcium (Ca) content of the grains significantly increased with an increase in the application amount of SOF in the two regions under study. Cd content showed antagonistic effects with the Se content of wheat grains, and when the SOF was applied at 1200 kg ha-1, the Cd content of the grains was significantly reduced by 30.1% in MC and 67.3% in DY, compared with under the Se0 treatment. After application of SOF, the Se content of different parts of the wheat plant ranked root > grain > spike-stalk > glume > leaf > stem. In summary, SOF application at a suitable concentration could increase wheat yields and significantly promote the Ca content of the grains. Meanwhile, the addition of Se effectively inhibited the level of toxic Cd in the wheat grains.

Differences and similarities in selenium biopathways in Astragalus, Neptunia (Fabaceae) and Stanleya (Brassicaceae) hyperaccumulators.

Selenium hyperaccumulator species are of primary interest for studying the evolution of hyperaccumulation and for use in biofortification because selenium is an essential element in human nutrition. In this study, we aimed to determine whether the distributions of selenium in the three most studied hyperaccumulating taxa (Astragalus bisulcatus, Stanleya pinnata and Neptunia amplexicaulis) are similar or contrasting, in order to infer the underlying physiological mechanisms. This study used synchrotron-based micro-X-ray fluorescence (µXRF) techniques to visualize the distribution of selenium and other elements in fresh hydrated plant tissues of A. racemosus, S. pinnata and N. amplexicaulis. Selenium distribution differed widely in the three species: in the leaves of A. racemosus and N. amplexicaulis selenium was mainly concentrated in the pulvini, whereas in S. pinnata it was primarilylocalized in the leaf margins. In the roots and stems of all three species, selenium was absent in xylem cells, whereas it was particularly concentrated in the pith rays of S. pinnata and in the phloem cells of A. racemosus and N. amplexicaulis. This study shows that Astragalus, Stanleya and Neptunia have different selenium-handling physiologies, with different mechanisms for translocation and storage of excess selenium. Important dissimilarities among the three analysed species suggest that selenium hyperaccumulation has probably evolved multiple times over under similar environmental pressures in the US and Australia.

Nutritional Supplementation and Enhanced Antioxidant Function by Dietary Intake of Selenoneine and Other Selenium Compounds in Red Seabream Pagrus major

Selenoneine, 2-selenyl-Nα, Nα, Nα-trimethyl-L-histidine, is the major organic selenium compound in marine fish. To characterize biological antioxidant function of selenoneine in fish, the accumulation of selenoneine and other selenium compounds, i. e., sodium selenite and selenomethionine, in the muscle and other tissues of red seabream. We reared red seabream by feeding of 1% dry pellet containing of sodium selenite, selenomethionine, or selenoneine of body weight twice a day for 4 weeks. After that, we replaced to 1% of normal commercial dry pellet of body weight twice a day for 1 week from the selenium supplementation, and tissue distribution of total selenium was determined. Selenium supplementation with selenoneine, selenomethionine, and sodium selenite enhanced selenium accumulation in the white muscle, kidney, and hepatopancreas in comparison with the control group. By the dietary intake of selenoneine, total selenium concentrations were increased in the white muscle, heart, kidney, spleen, hepatopancreas, brain, and blood cells in a dose-dependent manner during the trials after 2 weeks. Dietary intake of selenoneine as well as sodium selenite and selenomethionine reduced oxidation–reduction potential (ORP). Selenoneine concentrations in the white muscle and blood cells were accumulated for 4 weeks by the selenoneine intake, whereas selenoneine concentration was not elevated by the intake of selenomethionine and sodium selenite, suggesting that tissue selenoneine levels might be derived from only selenoneine-containing diet. The uptake factor of selenoneine from the artificial feed containing selenoneine was calculated to be 0.0062 in the white muscle and 4.0 in the blood. The half-life of total selenium in the blood cells and white muscle were estimated to be 60 days in the white muscle and 30 days in the blood.

Geochemical relationship and profile distribution of Selenium and Cadmium in typical Selenium-enriched areas in Enshi

Selenium (Se) is an essential nutrient element for humans, and Se-enriched products are gaining popularity due to their health benefits. However, Enshi, a region in China naturally rich in Se, a high background value of cadmium (Cd) is discovered, which severely impacts local Se-enriched agriculture. Therefore, it is crucial to explore the geochemical relationship between Se and Cd. In this study, we analyzed soil profiles and parent rocks of different geological ages from Enshi to investigate the accumulation and distribution of Se and Cd. The ratio of redox sensitive elements and the multivariate statistical analysis, along with XRD and XPS analysis, were utilized to investigate the correlated relationship between Se and Cd and the underlying geochemical mechanisms. The results showed that average Se and Cd contents in rocks were 1.67 and 0.32 mg/kg. Se and Cd levels reached highest at Permian in rocks of different geological ages, which may be related to the Permian Dongwu movement near the study area. The highest migration rate of Cd and Se from rock to soil was 12 and 1.5 times. The soil Se and Cd fractions were mostly in bound states, with the largest fraction of Se being organic-bound at an average of 45.9%. The reducible and the residue state accounted for the largest proportion in the Cd fractions, with an average of 40.6% and 25.6%. Redox-sensitive element ratios indicate a reducing forming environment of deep sediments in the Permian strata. Furthermore, the correlation and PCA analysis revealed highly significant positive correlations between Se, Cd, V and Cr, suggesting that the sources of Se and Cd were closely related to volcanic and biological activities. In conclusion, a strong geochemical relationship was observed between Se and Cd. And as a result, metal pollution must be closely monitored during the production of Se-enriched agriculture in Se-enriched regions.

Spatial distribution of selenium and other potentially toxic elements surrounding mountaintop coal mines in the Elk Valley, British Columbia, Canada

Despite the extensive use of mountaintop coal mining in the Elk Valley, British Columbia, Canada's largest metallurgical coal-producing region, little is known about the transport and deposition of fugitive dust emissions within its mountain landscape. This study aimed to assess the extent and spatial distribution of selenium and other potentially toxic elements (PTEs) near the town of Sparwood originating from fugitive dust emitted from two mountaintop coal mines. To achieve these objectives concentrations of 47 elements within moss tissues of Hylocomium splendens, Pleurozium schreberi, and Ptilium crista-castrensis were analyzed from 19 locations between May 29 to June 1, 2022. Contamination factors were then calculated to identify areas of contamination, along with generalized additive models to assess the relationship between selenium and the mines. Finally, Pearson correlation coefficients were calculated between selenium and other PTEs to determine which exhibited similar behaviour. This study found that selenium concentrations are a function of proximity to mountaintop mines, and the region's topographic features and prevailing wind patterns play a role in the transport and deposition of fugitive dust. Contamination is highest immediately surrounding mines and decreases at increasing distances, with the region's steep mountain ridges shielding the deposition of some fugitive dust when acting as a geographic barrier between adjacent valleys. Furthermore, silver, germanium, nickel, uranium, vanadium, and zirconium were identified as other PTEs of concern. The implications of this study are significant as it demonstrated the extent and spatial distribution of contaminants originating from fugitive dust emissions surrounding mountaintop mines and some of the controls to its distribution in mountain regions. As Canada and other mining jurisdictions look to expand critical mineral development, it will be important for proper risk assessment and mitigation in mountain regions to limit community and environmental exposure to contaminants within fugitive dust.

How the selenium distribution in CdTe affects the carrier properties of CdSeTe/CdTe solar cells

Recently, the introduction of a CdSexTe1-x (CST) buffer in the CdTe absorber has increased the photon absorption at both short wavelengths in the visible range (by removal of the parasitic absorption of the CdS layer) and at the infrared range (by reduction of the absorber band gap). But, moreover, the efficiency improvement is also attributed to a longer minority carrier lifetime when Se is added.This paper presents CdSexTe1-x/CdTe devices fabricated by evaporation at low substrate temperature and with a reduced absorber thickness (2 µm). These cells achieve record current densities, exceeding 28 mA/cm2 for this absorber thickness with efficiencies close to 15 %.We have compared CdSexTe1-x/CdTe devices made with different approaches and we have found that the performance improvement is due to a lower amount of interstitial Te in the absorber, suggesting that the increase of the minority carrier lifetime is connected with a change of the stoichiometry due to the selenium diffusion.

Comparison of Sodium Selenite and Selenium-Enriched Spirulina Supplementation Effects After Selenium Deficiency on Growth, Tissue Selenium Concentrations, Antioxidant Activities, and Selenoprotein Expression in Rats.

Selenium contributes to physiological functions through its incorporation into selenoproteins. It is involved in oxidative stress defense. A selenium deficiency results in the onset or aggravation of pathologies. Following a deficiency, the repletion of selenium leads to a selenoprotein expression hierarchy misunderstood. Moreover, spirulina, a microalga, exhibits antioxidant properties and can be enriched in selenium.. Our objective was to determine the effects of a sodium selenite or selenium-enriched spirulina supplementation. Thirty-two female Wistar rats were fed for 12 weeks with a selenium-deficient diet. After 8 weeks, rats were divided into 4 groups and were fed with water, sodium selenite (20 μg Se/kg body weight), spirulina (3 g/kg bw), or selenium-enriched spirulina (20 μg Se/kg bw + 3 g spirulina/kg bw). Another group of 8 rats was fed with normal diet during 12 weeks. Selenium concentration and antioxidant enzyme activities were measured in plasma, urine, liver, brain, kidney, heart, and soleus. Expression of GPx (1, 3), Sel (P, S, T, W), SEPHS2, TrxR1, ApoER2, and megalin were quantified in liver, kidney, brain, and heart. We showed that a selenium deficiency leads to a growth delay, reversed by selenium supplementation despite a minor loss of weight in week 12 for SS rats. All tissues displayed a decrease in selenium concentration following deficiency. The brain seemed protected. We demonstrated a hierarchy in selenium distribution and selenoprotein expression. A supplementation of sodium selenite improved GPx activities and selenoprotein expression while a selenium-enriched spirulina was more effective to restore selenium concentration especially in the liver, kidney, and soleus.

DEVELOPMENT AND IMPLEMENTATION OF AN EFFECTIVE METHOD FOR MANAGING SELENIUM DISTRIBUTION IN THE TECHNOLOGY OF SULFATE LEACHING OF FUSED PRODUCTS AT "THE NORILSK NICKEL HARJAVALTA OY" ENTERPRISE

The nickel refining company "Norilsk Nickel Harjavalta Oy" (NNH) produces three main types of nickel products: cathode nickel, nickel powders (briquettes), nickel salts. The decisive role in achieving high performance and guaranteed quality the nature of the impurities distribution and their behavior control, in particular selenium, plays a role in nickel products. Selenium has a sharply negative effect on the process of obtaining a cathode nickel base. At elevated concentrations in nickel-cobalt solution, this impurity makes it impossible to stable obtain commercial nickel cathodes. The study of the selenium behavior patterns in the processing circuit of metallurgical intermediates, such as feinstein and stein of electric slag-cleaning furnace (ESCF), made it possible to make the necessary changes to the technological scheme of the NNH leaching shop and to clarify the operating parameters of the main operations. A hypothesis is proposed about the possible mechanism of the effect of metallized fraction (alloy) contained in the feedstock on the process of reducing Se6+ to Se4+. The experiments performed confirmed the direct dependence of the selenium deposition degree from the solution to the solid precipitate from the alloy content in the feedstock. It has been established that by combining the applied ESCF matte with feinstein and/or nickel concentrate (NC) from feinstein separation, it is possible to effectively control the distribution of selenium in NNH technology, preventing its critical concentrations in nickel catholyte. Based on the research results, a two-flow scheme for processing processed products has been implemented, in which it is envisaged to use a combination of NC and products with a high content of metallized fraction. This method allowed to minimize the concentration of selenium in nickel catholyte.

Algal polysaccharides-Selenium nanoparticles regulate the uptake and distribution of selenium in rice plants.

Selenium (Se) is an essential trace element required for proper human and animal health. In this paper, we investigated the uptake and distribution characteristics of a new Se fertilizer, which comprises algal polysaccharides-selenium nanoparticles (APS-SeNPs), in rice plants in both hydroponic and pot experiments. The results from the hydroponic experiments revealed that the rice root uptake of APS-SeNPs fitted the Michaelis-Menten equation, with a V max of 13.54μgg-1 root dry weight (DW) per hour, which was 7.69 and 2.23 times those of selenite and selenate treatments, respectively. The root uptake of APS-SeNPs was inhibited by AgNO3 (64.81%-79.09%) and carbonyl cyanide 3-chlorophenylhydrazone (CCCP; 19.83%-29.03%), indicating that the uptake of APS-SeNPs by rice roots is mainly via aquaporins and is also affected by metabolic activity. Moreover, sulfur deficiency caused rice roots to absorb more APS-SeNPs, but treatment with APS-SeNPs increased the expression of the sulfate transporter OsSULTR1;2 in the roots, suggesting that OsSULTR1;2 is probably involved in the uptake of APS-SeNPs. The application of APS-SeNPs significantly increased the Se content in rice plants and the apparent Se uptake efficiency compared with selenate and selenite treatments. Most of the Se in the roots of rice plants was distributed in the cell wall, while it was primarily located in the cytosol in the shoots when treated with APS-SeNPs. The results from the pot experiments indicated that the application of Se enhanced the Se content of each rice tissue. It is worth noting that the Se content in brown rice under APS-SeNP treatment was higher than that under selenite or selenate treatment and was mainly concentrated in the embryo end, with the Se in organic form. Our findings provide important insights into the uptake mechanism and the distribution of APS-SeNPs in rice plants.

Development and Implementation of an Effective Method for Controlling Selenium Distribution during the Sulfate Leaching of Molten Products at Norilsk Nickel Harjavalta Oy

Development and Implementation of an Effective Method for Controlling Selenium Distribution during the Sulfate Leaching of Molten Products at Norilsk Nickel Harjavalta Oy

Influencing Factors on Bioavailability and Spatial Distribution of Soil Selenium in Dry Semi-Arid Area

The chemical transformation of selenium (Se) in the topsoil, especially when regarded as low to sufficient Se (with high bioavailability) in dry arid environments, has great importance in the alkaline soils to yield Se-enriched food regionally. The Se content in the highly alkaline soil of the northwest region of China has inordinate agriculture economic potential, and such soil distribution is likely to produce Se-enriched crops with distinct features. One such large area of Zhongwei was investigated for the distribution of soil Se and its bioavailability, and the influencing chemical factors of soil total Se (T-Se) and bioavailable Se (B-Se) in the agroecosystem. The results suggested that the T-Se in Zhongwei soils (mg/kg) ranged from 0.01 to 0.55 with a mean of 0.2 ± 0.08, which was lower than the average Se distribution of both China (0.29 mg/kg) and the world (0.40 mg/kg). However, the overall B-Se proportion (16%) in T-Se was adequately higher than in other Se-rich soils. Spatial distribution depicted that the T-Se was specified as deficient in 42.6% and sufficient in 55.5% of the studied area, while Zhongning county was prominent with a higher B-Se proportion (22%) in the T-Se of Zhongwei. The influencing factors, such as pH and organic matter (OM), showed significant association with B-Se, as suggested by Pearson’s correlation and multiple linear regression (MLR). Furthermore, the vertical distribution of T-Se and B-Se was higher in agricultural soil (AS) than in natural soil (NS) and can be justified in the context of their association with OM. Based on these results, the Se-fortified crops can be yielded by practices to improve corresponding influencing chemical factors of soil, especially in dry areas.

Distribution and attribute analysis of soil selenium in Hebei Province, China

From 2004 to 2018, c. 73% of the land area in Hebei Province was surveyed by a 1:250 000 land quality geochemical survey of the National Geochemistry Survey of Land Quality. Based on the topsoil (0–20 cm) datasets (50 724 analysis samples) and attribute analysis of the key area with a semivariance function model, geographic detector model and random forest model, the content and spatial distribution of soil selenium (Se) in Hebei Province and the influencing factors of the distribution of Se in the Shijiazhuang–Xingtai–Handan area were obtained. The soil Se content in Hebei Province is low, ranging from 0.02 to 3.23 mg kg –1 , with an average of 0.20 mg kg –1 . The spatial distribution of soil Se was heterogeneous, and the marginal Se (0.125–0.175 mg kg –1 ) area and the sufficient Se (0.175–0.40 mg kg –1 ) area were widely distributed, but the acreage of the Se-rich (0.40–3.0 mg kg –1 ) area was very limited, accounting for only 2.43% of the total survey area. However, the Shijiazhuang–Xingtai–Handan area was a significant Se enrichment area. The spatial distribution of Se in this area was restricted by natural and socioeconomic factors. Soil organic matter was the most influential factor and showed good coordination with Se. Coal burning superimposed on natural factors promotes the spatial differentiation of soil Se to a certain extent.

Evaluation of arsenic, selenium, tin and mercury in water and sediments of Bitter Lakes, Suez Canal, Egypt

Surface water and surface sediment samples were collected from Bitter Lakes from winter to autumn 2018 to evaluate the impact of land-based activities on the distribution of arsenic (As), selenium (Se), tin (Sn), and mercury (Hg). The metal concentrations were measured in 12 sampling sites along Bitter Lakes in the Suez Canal by the hydride system MH10 coupled with an atomic absorption spectrophotometer. The most industrialized regions in the lake showed elevated levels of metals in the water and sediments compared to other studied areas. As, Sn, and Hg showed the highest levels in water during winter (9.66, 1.03, and 0.25 µg/l, respectively), while Se recorded its highest values during summer (2.60 µg/L). Similarly, the highest total concentrations of the investigated elements in the sediments were 22400.00, 605.85, 40.91, and 446.55 ng/g, respectively.

Geochemical characteristics of soil selenium and evaluation of selenium-rich land resources in Guiyang area

Selenium concentration in soil is of great importance for the production of selenium-rich crops. In this article, we studied the geochemical characteristics of soil selenium and evaluated selenium-rich land resources in the Guiyang city area using results from a Guizhou multi-purpose regional geochemical survey. The results indicate that 1) the selenium content in topsoil in the Guiyang area ranges from 0.11 to 4.12 mg kg−1, with an average value of 0.70 mg kg−1, which is 2.4 times and 3.5 times the national and world soil background values, respectively, while the selenium content in deep soil ranges from 0.11 to 4.10 mg kg−1, with an average value of 0.42 mg kg−1, which is 1.4 and 2.1 times the national and world soil background values, respectively; in the vertical profile, the selenium content in soil decreases with the increase in soil depth. 2) The main factors affecting the distribution of selenium in soil include soil parent material, soil physical and chemical properties, and other components, such as soil type and land use, among which the soil parent material (rock) plays a decisive role. The selenium in soil mainly comes from the soil parent rock, increasing accordingly with the increase of the selenium background value of the parent rock; the physical and chemical properties of the soil and other components impose certain influences on the selenium content. Selenium presents a significant linear positive correlation with sulfur and organic carbon, while it has a negative correlation with the pH value; there is no significant difference in the selenium content in different soil types, following the distribution order of paddy soil >yellow soil> skeletal soil> lime soil> purple soil; land use has a certain effect on selenium in soil, following the distribution order of garden land > construction land > grassland > farmland > rocky hills > forest land. 3) The area of selenium-enriched soil in the study region is 11,408 km2, with 91.76% of selenium-enriched soil and 8.24% of general soil or extremely little excess-selenium soil. Therefore, the vast majority of soil in Guiyang is selenium-enriched. The city has large and abundant selenium-enriched areas, which are domestically and internationally rare and provides particularly favorable resource conditions for developing selenium-enriched efficient mountain agriculture to expedite rural revitalization.

A preliminary approach based on numerical simulation modelling and evaluation of permeable reactive barrier for aquifer remediation susceptible to selenium contaminant

In this study, numerical groundwater modelling software (GMS) was applied for a 2D transient state predictive (flow and contaminant fate and transport) conceptual model for heavy metal (Selenium in this research) contaminated groundwater, Imamzadeh-Jafar Aquifer, Kohgiluyeh and Boyer-Ahmad Province, Iran. The performances of permeable reactive barrier (PRB) in pollutant removal in the contaminated aquifers were studied by helping the MODFLOW-MT3DMS model. The spatiotemporal distribution of Selenium (Se) contaminant over the aquifer was illustrated using the calibrated flow and contaminant model. According to the findings, the downward movement of Se has resulted in an unsafe and undesirable water quality status in the Imamzadeh-Jafar aquifer, which is supported by field data. The sensitivity analysis of PRB layouts, geometric features, and reactant material characteristics was conducted in groundwater remediation. The numerical model results illustrated that the PRB thickness, ranging from 10 to 500 m, manifested the drop in Se concentration approximately from 40 to 46%. The results shed light on the hydraulic conductivity variations of reactant materials have effects less than 0.5% in Se removals. Furthermore, the decay rate variations in the ranges from 0.0001 to 0.01 d−1 could result in Se removal from 5 to 100%. According to studies, if the contaminant sources are prevented, in a) installation of PRB and b) not installation of PRB scenarios, the Imamzadeh-Jafar aquifer remediation will take 6 months and 84 months, respectively.

Topographic constraints on the distribution of selenium in the supergene environment: A case study at Yutangba, China

The local topography and leaching conditions significantly affect the spatial distribution of selenium (Se) in the local environment. However, the driving factors controlling Se distribution have not been well addressed. In this paper, taking Yutangba, a village known for human selenosis in China, as an example, we demonstrate how topographic factors influence the spatial distribution of Se in soils and plants. In the scenarios of slope ≤25°, the correlations among slope and soil/extractable/plant Se are significantly negative (P < 0.05), whereas they become weak or unclear when the slope is > 25°, suggesting that 25° of slope is a critical transition boundary. Similar observations were further verified by the soil erosion modulus (SEM) and the surface runoff intensity index (SRI), indicating that Se transport via soil erosion is limited and accounts for 11.2–17% of the soil Se, while surface runoff plays a dominant role in the Se distribution, accounting for 83–88.1%. Soil extractable Se is negatively correlated with SRI (Pearson r = −0.87 at slope < 25°), showing that the migration capacity of Se is higher at steep terrain and controlled by topography through soil erosion and surface runoff. The positive relationship between plant Se and soil/extractable Se demonstrates that topography indirectly influences plant Se through soil Se bioavailability. Abnormally local Se enrichment observed at the elevated steep hillside (>25°) in northwestern Yutangba primarily was resulted from the weathering of Se-rich rocks. These observations confirm that the topographic slope gradient influences the transport and spatial distribution of soil Se, implying that topography should be considered when studying the spatial distribution of soil Se at a regional scale, especially for the Se-poor belt in China.

Fluvial Deposition and Land Use Change Control Selenium Occurrence in Mollisols of Cold Region Agroecosystems.

Mollisols support the most productive agroecosystems in the world. Despite their critical links to food quality and human health, the varying distributions of selenium (Se) species and factors governing Se mobility in the mollisol vadose zone remain elusive. This research reveals that, in northern mollisol agroecosystems, Se hotspots (≥0.32 mg/kg) prevail along the regional river systems draining the Lesser Khingan Mountains, where piedmont Se-rich oil shales are the most probable source of regional Se. While selenate and selenite dominate Se species in the water-soluble and absorbed pools, mollisol organic matter is the major host for Se. Poorly crystalline and crystalline Fe oxides are subordinate in Se retention, hosting inorganic and organic Se at levels comparable to those in the adsorbed pool. The depth-dependent distributions of mollisol Se species for the non-cropland and cropland sites imply a predominance of reduced forms of Se under the mildly acidic and reducing conditions that, in turn, are variably impacted by agricultural land use. These findings therefore highlight that fluvial deposition and land use change together are the main drivers of the spatial variability and speciation of mollisol Se.

Efficiency of selenium biofortification of spring wheat: the role of soil properties and organic matter amendment

The effect of soil selenate application to two different soils (Phaeozem and Cambisol) on biomass yield and selenium (Se) uptake by spring wheat (Triticum aestivum L.) was investigated in a pot experiment. Additionally, organic amendment (fugate, i.e. liquid by-product from the biogas plant) was applied to assess (i) the effect of organic matter on the bioavailability of Se and (ii) the fugate (containing 2.3 mg/kg of Se) as a potential source of Se for plants. Selenium was applied at two levels: 6.4 µg/kg (Se1) and 32 µg/kg (Se2) of soil. The efficiency of biofortification and the distribution of selenium within individual plant compartments were assessed in this case. The highest Se contents in the grain were achieved in the treatments receiving NPK fertiliser together with selenate, 455 µg/kg (Se1) and 2 721 µg/kg (Se2) when wheat was planted in Phaeozem. Fugate in co-application with selenate significantly reduced Se content in wheat plants as compared to treatments enriched solely with selenate. The lower Se contents in the wheat plants growing in Phaeozem were due to the biodilution effect, whereas in Cambisol, the decrease in wheat Se uptake was not clearly driven by a particular factor.

Effects of anthropogenic and natural environmental factors on the spatial distribution of trace elements in agricultural soils

The concentrations of trace elements in agricultural soils directly affect the ecological security and quality of agricultural products. A comprehensive study aimed at quantitatively analyze the effects of anthropogenic and natural environmental factors on the spatial distribution of heavy metals (HMs) and selenium (Se) in agricultural soils in a typical grain producing area of China. Factors considered in this study were parent rock, soil physicochemical properties, topography, precipitation, mine activity, and vegetation. Results showed that the median values of Zn, Cd, Cr, and Cu of 111 topsoil samples exceeded the background values of Guangxi province but were lower than the relevant national soil quality standards, and 85% of soil samples were classified as having rich Se levels (0.40 −3.0 mg kg−1). The potential ecological risk index of soil heavy metals as a whole was low, with Cd in 9% of the samples posing moderate ecological risk. The concentrations of heavy metals and Se were relatively high in soils from shale rock. Soil properties, mainly Fe2O3 and Mn played a dominant role on soil HMs and Se concentrations. Based on GeoDetector, we found that the interaction effects of two factors on the spatial differentiation of soil HMs and Se were greater than their sum effect. Among the factors, Mn enhanced the explanatory power of the model the most when interacting with other factors for soil Zn; the greatest interactive effect was between distance from mining area and Mn for Cd (q = 0.70); Fe2O3 significantly promoted the spatial differentiation of soil Cr, Cu and Se when interacting with other factors (q > 0.50). These findings contribute to a better understanding of the factors that drive the distribution of HMs and Se in agricultural soils.

Enrichment and Distribution of Selenium in Pediococcus acidilactici MRS-7: Impact on Its Biochemical Composition, Microstructure, and Gastrointestinal Survival.

Lactic acid bacteria can convert selenium (Se) from inorganic to organic and elemental forms, but the distribution and existence form of organic Se in the bacteria are not clear after Se enrichment, and the effects of selenization on the growth and nutritional value of strains also need to be studied. In this study, Pediococcus acidilactici MRS-7 could absorb up to 67% of inorganic Se and convert most of it into organic Se; about 75% of organic Se was selenoprotein, 2.7% was Se-polysaccharide, and 4.6% was Se-nucleic acid. Additionally, Se-enriched treatment increased the levels of amino acids and essential elements in P. acidilactici MRS-7. Finally, after Se enrichment, Se nanoparticles (SeNPs) were found on the surface of P. acidilactici MRS-7, but they had no harmful effect on its morphology, and its survival during gastrointestinal digestion was not affected, indicating that SeP has potential probiotic value in the food industry.