Segmented Images Research Articles

A new framework for quantifying alongshore variability of swash motion using fully convolutional networks

Waves running up and down the beach (‘swash’) at the landward edge of the ocean can cause changes to the beach topology, can erode dunes, and can result in inland flooding. Despite the importance of swash, field observations are difficult to obtain in the thin, bubbly, and potentially sediment laden fluid layers. Here, swash excursions along an Atlantic Ocean beach are estimated with a new framework, V-BeachNet, that uses a fully convolutional network to distinguish between sand and the moving edge of the wave in rapid sequences of images. V-BeachNet is trained with 16 randomly selected and manually segmented images of the swash zone, and is used to estimate swash excursions along 200 m of the shoreline by automatically segmenting four 1-h sequences of images that span a range of incident wave conditions. Data from a scanning lidar system are used to validate the swash estimates along a cross-shore transect within the camera field of view. V-BeachNet estimates of swash spectra, significant wave heights, and wave-driven setup (increases in the mean water level) agree with those estimated from the lidar data.

Hybrid machine learning-based breast cancer segmentation framework using ultrasound images with optimal weighted features.

One of the most dangerous conditions in clinical practice is breast cancer because it affects the entire life of women in recent days. Nevertheless, the existing techniques for diagnosing breast cancer are complicated, expensive, and inaccurate. Many trans-disciplinary and computerized systems are recently created to prevent human errors in both quantification and diagnosis. Ultrasonography is a crucial imaging technique for cancer detection. Therefore, it is essential to develop a system that enables the healthcare sector to rapidly and effectively detect breast cancer. Due to its benefits in predicting crucial feature identification from complicated breast cancer datasets, machine learning is widely employed in the categorization of breast cancer patterns. The performance of machine learning models is limited by the absence of a successful feature enhancement strategy. There are a few issues that need to be handled with the traditional breast cancer detection method. Thus, a novel breast cancer detection model is designed based on machine learning approaches and employing ultrasonic images. At first, ultrasound images utilized for the analysis is acquired from the benchmark resources and offered as the input to preprocessing phase. The images are preprocessed by utilizing a filtering and contrast enhancement approach and attained the preprocessed image. Then, the preprocessed images are subjected to the segmentation phase. In this phase, segmentation is performed by employing Fuzzy C-Means, active counter, and watershed algorithm and also attained the segmented images. Later, the segmented images are provided to the pixel selection phase. Here, the pixels are selected by the developed hybrid model Conglomerated Aphid with Galactic Swarm Optimization (CAGSO) to attain the final segmented pixels. Then, the selected segmented pixel is fed in to feature extraction phase for attaining the shape features and the textual features. Further, the acquired features are offered to the optimal weighted feature selection phase, and also their weights are tuned tune by the developed CAGSO. Finally, the optimal weighted features are offered to the breast cancer detection phase. Finally, the developed breast cancer detection model secured an enhanced performance rate than the classical approaches throughout the experimental analysis.

3DVascNet: An Automated Software for Segmentation and Quantification of Mouse Vascular Networks in 3D.

Analysis of vascular networks is an essential step to unravel the mechanisms regulating the physiological and pathological organization of blood vessels. So far, most of the analyses are performed using 2-dimensional projections of 3-dimensional (3D) networks, a strategy that has several obvious shortcomings. For instance, it does not capture the true geometry of the vasculature and generates artifacts on vessel connectivity. These limitations are accepted in the field because manual analysis of 3D vascular networks is a laborious and complex process that is often prohibitive for large volumes. To overcome these issues, we developed 3DVascNet, a deep learning-based software for automated segmentation and quantification of 3D retinal vascular networks. 3DVascNet performs segmentation based on a deep learning model, and it quantifies vascular morphometric parameters such as vessel density, branch length, vessel radius, and branching point density. We tested the performance of 3DVascNet using a large data set of 3D microscopy images of mouse retinal blood vessels. We demonstrated that 3DVascNet efficiently segments vascular networks in 3D and that vascular morphometric parameters capture phenotypes detected by using manual segmentation and quantification in 2 dimension. In addition, we showed that, despite being trained on retinal images, 3DVascNet has high generalization capability and successfully segments images originating from other data sets and organs. Overall, we present 3DVascNet, a freely available software that includes a user-friendly graphical interface for researchers with no programming experience, which will greatly facilitate the ability to study vascular networks in 3D in health and disease. Moreover, the source code of 3DVascNet is publicly available, thus it can be easily extended for the analysis of other 3D vascular networks by other users.

Optimized encoder-decoder cascaded deep convolutional network for leaf disease image segmentation.

Nowadays, Deep Learning (DL) techniques are being used to automate the identification and diagnosis of plant diseases, thereby enhancing global food security and enabling non-experts to detect these diseases. Among many DL techniques, a Deep Encoder-Decoder Cascaded Network (DEDCNet) model can precisely segment diseased areas from the leaf images to differentiate and classify multiple diseases. On the other hand, the model training depends on the appropriate selection of hyperparameters. Also, this network structure has weak robustness with different parameters. Hence, in this manuscript, an Optimized DEDCNet (ODEDCNet) model is proposed for improved leaf disease image segmentation. To choose the best DEDCNet hyperparameters, a brand-new Dingo Optimization Algorithm (DOA) is included in this model. The DOA depends on the foraging nature of dingoes, which comprises exploration and exploitation phases. In exploration, it attains many predictable decisions in the search area, whereas exploitation enables exploring the best decisions in a provided area. The segmentation accuracy is used as the fitness value of each dingo for hyperparameter selection. By configuring the chosen hyperparameters, the DEDCNet is trained to segment the leaf disease regions. The segmented images are further given to the pre-trained Convolutional Neural Networks (CNNs) followed by the Support Vector Machine (SVM) for classifying leaf diseases. ODEDCNet performs exceptionally well on the PlantVillage and Betel Leaf Image datasets, attaining an astounding 97.33% accuracy on the former and 97.42% accuracy on the latter. Both datasets achieve noteworthy recall, F-score, Dice coefficient, and precision values: the Betel Leaf Image dataset shows values of 97.4%, 97.29%, 97.35%, and 0.9897; the PlantVillage dataset shows values of 97.5%, 97.42%, 97.46%, and 0.9901, all completed in remarkably short processing times of 0.07 and 0.06 seconds, respectively. The achieved outcomes are evaluated with the contemporary optimization algorithms using the considered datasets to comprehend the efficiency of DOA.

Mobile Application Based on Convolutional Neural Networks for Pterygium Detection in Anterior Segment Eye Images at Ophthalmological Medical Centers

This article introduces an innovative mobile solution for Pterygium detection, an eye disease, using a classification model based on the convolutional neural network (CNN) architecture ResNext50 in images of the anterior segment of the eye. Four models (ResNext50, ResNet50, MobileNet v2, and DenseNet201) were used for the analysis, with ResNext50 standing out for its high accuracy and diagnostic efficiency. The research, focused on applications for ophthalmological medical centers in Lima, Peru, explains the process of development and integration of the ResNext50 model into a mobile application. The results indicate the high effectiveness of the system, highlighting its high precision, recall, and specificity, which exceed 85%, thus showing its potential as an advanced diagnostic tool in ophthalmology. This system represents a significant tool in ophthalmology, especially for areas with limited access to specialists, offering a rapid and reliable diagnosis of Pterygium. The study also addresses the technical challenges and clinical implications of implementing this technology in a real-world context.

COVID‑19 detection from chest X-ray images using transfer learning

COVID-19 is a kind of coronavirus that appeared in China in the Province of Wuhan in December 2019. The most significant influence of this virus is its very highly contagious characteristic which may lead to death. The standard diagnosis of COVID-19 is based on swabs from the throat and nose, their sensitivity is not high enough and so they are prone to errors. Early diagnosis of COVID-19 disease is important to provide the chance of quick isolation of the suspected cases and to decrease the opportunity of infection in healthy people. In this research, a framework for chest X-ray image classification tasks based on deep learning is proposed to help in early diagnosis of COVID-19. The proposed framework contains two phases which are the pre-processing phase and classification phase which uses pre-trained convolution neural network models based on transfer learning. In the pre-processing phase, different image enhancements have been applied to full and segmented X-ray images to improve the classification performance of the CNN models. Two CNN pre-trained models have been used for classification which are VGG19 and EfficientNetB0. From experimental results, the best model achieved a sensitivity of 0.96, specificity of 0.94, precision of 0.9412, F1 score of 0.9505 and accuracy of 0.95 using enhanced full X-ray images for binary classification of chest X-ray images into COVID-19 or normal with VGG19. The proposed framework is promising and achieved a classification accuracy of 0.935 for 4-class classification.

OffRoadSynth Open Dataset for Semantic Segmentation using Synthetic-Data-Based Weight Initialization for Autonomous UGV in Off-Road Environments

This article concerns the issue of image semantic segmentation for the machine vision system of an autonomous Unmanned Ground Vehicle (UGV) moving in an off-road environment. Determining the meaning (semantics) of the areas visible in the recorded image provides a complete understanding of the scene surrounding the autonomous vehicle. It is crucial for the correct determination of a passable route. Nowadays, semantic segmentation is generally solved using convolutional neural networks (CNN), which can take an image as input and output the segmented image. However, proper training of the neural network requires the use of large amounts of data, which becomes problematic in the situation of low availability of large, dedicated image data sets that consider various off-road situations - driving on various types of roads, surrounded by diverse vegetation and in various weather and light conditions. This study introduces a synthetic image dataset called “OffRoadSynth” to address the training data scarcity for off-road scenarios. It has been shown that pre-training the neural network on this synthetic dataset improves image segmentation accuracy compared to other methods, such as random network weight initialization or using larger, generic datasets. Results suggest that using a smaller but domain-dedicated set of synthetic images to initialize network weights for training on the target real-world dataset may be an effective approach to improving semantic segmentation results of images, including those from off-road environments.

An enhanced Garter Snake Optimization-assisted deep learning model for lung cancer segmentation and classification using CT images

An early detection of lung tumors is critical for better treatment results, and CT scans can reveal lumps in the lungs which are too small to be picked up by conventional X-rays. CT imaging has advantages, but it also exposes a person to radiation from ions, which raises the possibility of malignancy, particularly when the imaging procedure is done. Access to expensive-quality CT scans and the related sophisticated analytic tools might be restricted in environments with fewer resources due to their high cost and limited availability. It will need an array of creative technological innovations to overcome such weaknesses. This paper aims to design a heuristic and deep learning-aided lung cancer classification using CT images. The collected images are undergone for segmentation, which is performed by Shuffling Atrous Convolutional (SAC) based ResUnet++ (SACRUnet++). Finally, the lung cancer classification is performed by the Adaptive Residual Attention Network (ARAN) by inputting the segmented images. Here the parameters of ARAN are optimally tuned using the Improved Garter Snake Optimization Algorithm (IGSOA). The developed lung cancer classification performance is compared to conventional lung cancer classification models and it showed high accuracy.

Brain Tumor Prediction and Segmentation with Morphological Region-based Active Contour Model and Refinement using Boltzmann Monte Carlo Method in MRI Images

Objectives: The primary goal of the research work is to accurately detect the precise location of the brain tumor in the radiological Magnetic Resonance Imaging (MRI) images of human brain using segmentation method. Methods: In this research work, we introduce mainly the Morphological Region-based Active Contour model and Boltzmann Monte Carlo method (MACB model), involving a comprehensive three-step methodology for the segmentation of the brain, MRI images in order to detect brain tumor. The initial step involves pre-processing which includes Gaussian filtering for noise reduction and Contrast Limited Adaptive Histogram Equalization (CLAHE) technique to enhance image features. In the second step, we identify tumor-related clusters using morphological operations and delineate the tumor regions using Active Contour (Snake) model to get a segmented image. In the final step, the Boltzmann Monte Carlo method is used to refine the edges of the segmented image. To evaluate the effectiveness of this approach, the 2D brain tumor datasets, available in the public domain, are used. The first dataset is taken from Kaggle website and has 3064 MRI human brain images and its respective ground truth images which is used for segmentation. The second dataset is used for visualization of segmented tumor, available in the same Kaggle website. Findings: The Performance metrics for finding similarity between the segmented images generated using the proposed MACB model and the ground truth images, available in the first dataset, exhibit higher values. That is, the proposed method has achieved higher values of Dice Similarity Coefficient (DSC): 93.26%, Jaccard Co-efficient: 86.44%, Sensitivity: 97.27%, Specificity: 99.43% and Pixel accuracy: 98.95%. Novelty: In this research work, MACB model is proposed for the detection, segmentation, and refinement process of brain tumor by incorporating Boltzmann Monte Carlo method with Morphological Region-Based Active Contour model. This novel approach has resulted in enhanced precision and efficiency in the brain tumor segmentation process. Keywords: Brain Tumor Segmentation, Morphological Operation, Active Contour, Boltzmann Monte Carlo Method, Magnetic Resonance Imaging

HiDiffSeg: A hierarchical diffusion model for blood vessel segmentation in retinal fundus images

In medical diagnosis, achieving accurate segmentation of fundus vessels is crucial for understanding and identifying various anatomical structures. However, traditional algorithms often face challenges in achieving precise segmentation due to the poor quality of fundus images and the complex branching structure of vessels. To address this issue, we propose a novel approach called HiDiffSeg, which is a coarse-to-fine hierarchical diffusion model for blood vessel segmentation. Our method integrates an enhanced processing coarse-to-fine strategy for retinal fundus images into the denoising process of the diffusion model. The diffusion model is divided into two modules: the dual-guidance module (DGM) and the refinement-guidance module (RGM). The DGM takes the vascular skeleton image and the initial denoised vessel segmentation image generated by the vascular image enhancement model as conditions. Meanwhile, the RGM uses the fundus image as a condition to obtain more accurate results through iterative refinement. To emphasize the significance of vessel edges, we introduce a vessel enhancement module. By taking the original image as input, we generate a pixel-wise edge attention map, assigning greater importance to corresponding edge pixels. To the best of our knowledge, this is the first time a hierarchical diffusion model has been applied to fundus vessel segmentation. We demonstrate the accuracy of our method on three publicly available fundus retinal datasets (i.e., DRIVE, STARE, and CHASE_DB1) using evaluation metrics and compare it with eleven state-of-the-art fundus vessel segmentation methods.

A Brillouin microscopy analysis of the crystalline lenses of Chinese adults with myopia.

To evaluate lenticular biomechanical and geometric parameters in Chinese adults with myopia and identify relevant factors using Brillouin microscopy (BM) and Pentacam. The biomechanical and geometric properties of the ocular lenses of Chinese adults with myopia were quantified using BM. Anterior segment images were acquired using a Pentacam. Correlated factors including age, sex, spherical equivalent (SE), intraocular pressure (IOP), axial length (AL), white-to-white ratio (WTW), central corneal thickness (CCT), anterior chamber depth (ACD), anterior chamber volume (ACV), and anterior chamber angle (ACA) were analyzed. We studied 65 eyes from 65 participants (mean age, 25.23 ± 6.12years). Width of Top Plateau (WTP), Width of Bottom Plateau (WBP), Slope of Anterior Cortex (SAC), Slope of Posterior Cortex (SPC), and Height of Plateau (Height) metrics obtained using BM showed mean values of 2.597 ± 0.393mm, 4.310 ± 0.535mm, 1.344 ± 0.549 GPa/mm, -1.343 ± 0.480 GPa/mm, and 3.373 ± 0.048 GPa, respectively. No significant correlation was found between these parameters and sex, SE, IOP, CCT, ACA, or Height. Interestingly, WBP (r = 0.467, P < 0.001), SAC (r = 0.412, P = 0.001), and SPC (r = -0.280, P = 0.024) were significantly associated with age, and an age-related increase of WBP (slope of 35.36 ± 10.08μm per year) was identified. Both ACD and ACV showed significant correlations with SAC (r = 0.329 and 0.380, P = 0.008 and 0.002, respectively), but not with SPC. BM provided a novel perspective on lenticular biomechanical and geometric properties in Chinese adults with myopia, which correlated with age, AL, WTW, ACD, and ACV.

Algal Bed Region Segmentation Based on a ViT Adapter Using Aerial Images for Estimating CO2 Absorption Capacity

In this study, we propose a novel method for algal bed region segmentation using aerial images. Accurately determining the carbon dioxide absorption capacity of coastal algae requires measurements of algal bed regions. However, conventional manual measurement methods are resource-intensive and time-consuming, which hinders the advancement of the field. To solve these problems, we propose a novel method for automatic algal bed region segmentation using aerial images. In our method, we use an advanced semantic segmentation model, a ViT adapter, and adapt it to aerial images for algal bed region segmentation. Our method demonstrates high accuracy in identifying algal bed regions in an aerial image dataset collected from Hokkaido, Japan. The experimental results for five different ecological regions show that the mean intersection over union (mIoU) and mean F-score of our method in the validation set reach 0.787 and 0.870, the IoU and F-score for the background region are 0.957 and 0.978, and the IoU and F-score for the algal bed region are 0.616 and 0.762, respectively. In particular, the mean recognition area compared with the ground truth area annotated manually is 0.861. Our study contributes to the advancement of blue carbon assessment by introducing a novel semantic segmentation-based method for identifying algal bed regions using aerial images.

True lateral imaging during lumbar medial branch radiofrequency neurotomy: Interobserver reliability

BackgroundTrue lateral imaging (TLI), obtained by superimposing bilateral lumbar spine structures and aligning superior endplate cortical bone, requires deliberate rotational adjustments of the laterally positioned fluoroscope in both the axial and longitudinal planes. True lateral segmental imaging is necessary to depict true and accurate radiofrequency (RF) cannula positioning relative to bony anatomy during lumbar medial branch radiofrequency neurotomy (LMBRFN). ObjectiveTo determine the interobserver reliability of TLI during LMBRFN. MethodsThis was a retrospective review of a prospectively generated collection of lateral fluoroscopic images to determine the interobserver reliability of TLI during LMBRFN. Lateral fluoroscopic images were prospectively collected from 34 consecutive L4-5 and L5-S1 LMBRFN procedures during routine clinical practice. Employing International Pain and Spine Intervention Society (IPSIS) LMBRFN and TLI techniques, an RF cannula was positioned parallel to the L3 and L4 medial branches and the L5 dorsal rami. During the normal course of TLI, untrue and final true lateral segmental images were obtained and saved. An original data set of 100 pairs of true and untrue lateral images was reviewed to verify true laterality using established criteria; disagreement was resolved by consensus or discarding ambiguous cases. To measure interobserver reliability (Cohen's Kappa), two blinded expert reviewers independently reviewed the image set, identifying the true lateral image and the plane requiring correction. ResultsThe observers agreed upon 98/98 true lateral RF-segment images (Kappa score 1.0 [1.00,1.00]). The observers agreed upon 86/98 maneuvers to correct the untrue RF-segment image. The Kappa score for determining the most appropriate corrective maneuver was 0.76 (0.63,0.89), showing substantial interobserver agreement. ConclusionsThe true lateral image of the targeted RF segment during LMBRFN was reliably determined with perfect interobserver agreement. Interobserver agreement was substantial regarding the maneuver to achieve TLI.

Hybrid deep learning assisted multi classification: Grading of malignant thyroid nodules.

Thyroid nodules are commonly diagnosed with ultrasonography, which includes internal characteristics, varying looks, and hazy boundaries, making it challenging for a clinician to differentiate between malignant and benign forms based only on visual identification. The advancement of AI, particularly DL, provides significant breakthroughs in the domain of medical image identification. Yet, there are certain obstacles to achieving accuracy as well as efficacy in thyroid nodule detection. The thyroid nodules in this study are detected and classified using an inventive hybrid deep learning-assisted multi-classification method. The median blur method is applied in this work to eliminate the salt and pepper noise from the image. Then MPIU-Net-based segmentation is utilized to segment the image. The LGBPNP-based features are retrieved from the segmented image to obtain a single histogram sequence of the LGBP pattern in addition to other features like extraction of multi-texton and LTP-based features. After the feature extraction, the data augmentation process is applied and then the features are fed to the hybrid classification-based nodule classification model that comprises Deep Maxout and CNN, this hybrid classification trains the features and predicts the thyroid nodule. Additionally, the TIRADS score classification is used for the projected malignant thyroid nodule coupled with statistical features collected from the segmented. The DBNAAF with transfer learning model is employed to classify the grading of malignant thyroid nodules, where the weights of the model are learned with transfer learning. The MCC of the Hybrid Model is 0.9445, whereas the DCNN is 0.6858, YOLOV3-DMRF is 0.7229, CNN is 0.7780, DBN is 0.7601, Bi-GRU is 0.7038, Deep Maxout is 0.7528, and RNN is 0.8522, respectively.

Advanced Integration of Machine Learning Techniques for Accurate Segmentation and Detection of Alzheimer’s Disease

Alzheimer’s disease is a common type of neurodegenerative condition characterized by progressive neural deterioration. The anatomical changes associated with individuals affected by Alzheimer’s disease include the loss of tissue in various areas of the brain. Magnetic Resonance Imaging (MRI) is commonly used as a noninvasive tool to assess the neural structure of the brain for diagnosing Alzheimer’s disease. In this study, an integrated Improved Fuzzy C-means method with improved watershed segmentation was employed to segment the brain tissue components affected by this disease. These segmented features were fed into a hybrid technique for classification. Specifically, a hybrid Convolutional Neural Network–Long Short-Term Memory classifier with 14 layers was developed in this study. The evaluation results revealed that the proposed method achieved an accuracy of 98.13% in classifying segmented brain images according to different disease severities.

Voxel level dense prediction of acute stroke territory in DWI using deep learning segmentation models and image enhancement strategies.

To build a stroke territory classifier model in DWI by designing the problem as a multiclass segmentation task by defining each stroke territory as distinct segmentation targets and leveraging the guidance of voxel wise dense predictions. Retrospective analysis of DWI images of 218 consecutive acute anterior or posterior ischemic stroke patients examined between January 2017 to April 2020 in a single center was carried out. Each stroke area was defined as distinct segmentation target with different class labels. U-Net based network was trained followed by majority voting of the voxel wise predictions of the model to transform them into patient level stroke territory classes. Effects of bias field correction and registration to a common space were explored. Of the 218 patients included in this study, 141 (65%) were anterior stroke, and 77 were posterior stroke (35%) whereas 117 (53%) were male and 101 (47%) were female. The model built with original images reached 0.77 accuracy, while the model built with N4 bias corrected images reached 0.80 and the model built with images which were N4 bias corrected and then registered into a common space reached 0.83 accuracy values. Voxel wise dense prediction coupled with bias field correction to eliminate artificial signal increase and registration to a common space help models for better performance than using original images. Knowing the properties of target domain while designing deep learning models is important for the overall success of these models.

Interactive machine learning for segmenting pores of sandstone in computed tomography images

In the realm of gas field development and CO2/H2 geological storage, the precise characterization of reservoir parameters stands as a critical role. In recent years, digital rock technology has emerged as a cutting-edge tool for examining micro-pore structures, permeability parameter characteristics, and reservoir flow mechanisms. However, there are still certain defects in image segmentation, where low-density pore bodies in low-resolution images make it difficult to clearly distinguish between pores and solid minerals, affecting the accuracy of pore segmentation. This article aims to improve the accuracy of sandstone pore segmentation. We utilized the interactive machine learning segmentation method to segment pore structures and compare the segmented images obtained with the traditional ImageJ grayscale threshold segmentation methods. Furthermore, we evaluated the effectiveness of different segmentation methods quantitatively using the confusion matrix. The research results indicate that the segmentation quality (F1 score) of the machine learning method is higher than the grayscale methods, and the segmentation effectiveness of machine learning method is more stable. To further validate the accuracy of the machine learning method, we simulated the permeability and the results were compared with the experimental results, and the results show that the deviation in permeability segmented through machine learning methods is the smallest. Therefore, our results demonstrate the effective application of the machine learning method in segmenting sandstone pores in the digital rock images.

Segmentation of mature human oocytes provides interpretable and improved blastocyst outcome predictions by a machine learning model

Within the medical field of human assisted reproductive technology, a method for interpretable, non-invasive, and objective oocyte evaluation is lacking. To address this clinical gap, a workflow utilizing machine learning techniques has been developed involving automatic multi-class segmentation of two-dimensional images, morphometric analysis, and prediction of developmental outcomes of mature denuded oocytes based on feature extraction and clinical variables. Two separate models have been developed for this purpose—a model to perform multiclass segmentation, and a classifier model to classify oocytes as likely or unlikely to develop into a blastocyst (Day 5–7 embryo). The segmentation model is highly accurate at segmenting the oocyte, ensuring high-quality segmented images (masks) are utilized as inputs for the classifier model (mask model). The mask model displayed an area under the curve (AUC) of 0.63, a sensitivity of 0.51, and a specificity of 0.66 on the test set. The AUC underwent a reduction to 0.57 when features extracted from the ooplasm were removed, suggesting the ooplasm holds the information most pertinent to oocyte developmental competence. The mask model was further compared to a deep learning model, which also utilized the segmented images as inputs. The performance of both models combined in an ensemble model was evaluated, showing an improvement (AUC 0.67) compared to either model alone. The results of this study indicate that direct assessments of the oocyte are warranted, providing the first objective insights into key features for developmental competence, a step above the current standard of care—solely utilizing oocyte age as a proxy for quality.

Enchancing Lung Disease Classification through K-Means Clustering, Chan-Vese Segmentation, and Canny Edge Detection on X-Ray Segmented Images

The lungs are one of the vital organs in the human body. Not only play a role in the respiratory system, the lungs are also responsible for the human circulatory system. Supporting examinations can also facilitate medical workers in determining the diagnosis. Usually a lung examination is complemented by a chest X-ray examination procedure. This examination aims to see directly and assess the severity of lung conditions. With current technological advances, image analysis can be done easily. Through digital image processing methods, information can be obtained from images that can be used for analysis as a support for diagnoses in the world of health. Image segmentation is a method in which digital images are divided into several segments or subgroups based on the characteristics of the pixels in the image. In this study, clustering with the K-Means method will be carried out on the results of segmentation of x-ray images of lung diseases, namely Covid-19, Tuberculosis, and Pneumonia. The segmentation method that will be implemented is the Chan-Vese Method and the Canny Edge Detection Method. This research shows that the results of the accuracy of applying the K-Means Clustering method to Chan-Vese and Canny Edge-Based Image Segmentation are 80%.

An Evaluation Method of Dental Treatment Quality Combined with Deep Learning and Multi-index Decomposition

ABSTRACT Dentists judge that the quality of dental treatment for each patient is very time-consuming and inefficient, lacks quantitative evaluation criteria, and is easy to cause errors. At the same time, the traditional method of extracting tooth and root canal image features based on experience is difficult to accurately extract the tooth area and root canal filling area, resulting in low accuracy of tooth and root canal segmentation, which in turn affects the accuracy of tooth treatment quality evaluation. In this paper, a deep learning convolutional neural network is used to segment the root canal filling area, tooth boundary, and the boundary between tooth and soft tissue for the real patient ‘s root canal treatment and filling image. Finally, the segmented image is quantitatively evaluated according to the multi-evaluation index of professional doctors. The experimental results show that the intelligent evaluation method of dental treatment quality combined with deep learning and multi-index decomposition proposed in this paper not only unifies the evaluation criteria of dental treatment quality but also the therapeutic effect of quantitative scoring can effectively improve the work efficiency of doctors, which has reference significance for the application of artificial intelligence in the medical field.