Seed Length Research Articles

Strategic use of honey bees (Apis mellifera L.) to increase the number and size of fruits in kiwifruit (Actinidia chinensis var. deliciosa)

Fruit size in kiwifruit depends mainly on the number of seeds or fertilized ovules. Pollination by wind is not enough to obtain a fruit size accepted by the market, so it is necessary to perform this practice by means of bees and/or artificially. Since there are controversies regarding the efficiency of each practice, the objective of this study was to determine the effect of pollination with honey bees, artificial-hand pollination and the combination of both methods, on fruit set at harvest, fruit size (length, minor and major diameter, weight), number of seeds, maturity and internal quality indexes (color, firmness, soluble solids content, dry matter, titratable acidity). The trial took place in the 2018/2019 and 2019/2020 seasons on a ‘Hayward’ kiwifruit orchard located in Miramar, in the southeast of Buenos Aires Province, Argentina. Treatments were applied in three uniform canes on 9 vines. Honey bee and combined pollination treatments showed a better fruit set at harvest (24.6% and 18.5% higher, respectively) compared to artificial-hand pollination. Also, the fruits originated from honey bee pollinated flowers and the combined treatment had higher length (4.8% and 5.4%), major diameter (5.5% and 5.7%), minor diameter (2.9% and 3.5%), weight (14.6% and 15.3%) and number of seeds (11.6% and 10.4%) with respect to those obtained by artificial-hand pollination. No significant differences were detected between treatments for maturity/quality indexes at harvest. Pollination with honey bees and the combined method were the most efficient. These results indicate that proper management of honey bees for kiwifruit pollination improves yield without affecting maturity, and preserving fruit quality indexes.

Effect of Seed Size and Different Pretreatment Methods on Germination of Albizia zygia (DC.) J. F. Macbr

Albizia zygia produces valuable timber which has received some level of prominence in the international market. However, the seeds are dormant, and the tree species remain undomesticated. This study was conducted to evaluate the effect of seed size and presowing on the germination of Albizia zygia in a nursery. Seeds were grouped into four categories in regard to their length, small (≤0.5 cm), medium (> 0.5 < 0.8 cm), large (≥0.8 cm), and mixture of small, medium, and large seeds. The seeds were subjected to five main seed pretreatment methods, namely, soaking in sulphuric acid (H2SO4) for 2 minutes, mechanical scarification, soaking in hot water for 5 minutes, soaking in cold water for 24 hours, and control where seeds were sown without any treatment. The results indicate that combination of mechanical scarification and large seeds produced the highest (100%) germination. Hot water treatment was effective in large seeds producing 69.0% germination. The increased germination for mechanically scarified seeds suggests that seed dormancy in Albizia zygia is mainly due to its hard seed coat. Therefore, it is recommended to farmers to adopt use of mechanical scarification and large seeds, since it is safe and effective.

SYL3-k increases style length and yield of F1 seeds via enhancement of endogenous GA4 content in Oryza sativa L. pistils

Key messageSYL3-k allele increases the outcrossing rate of male sterile line and the yield of hybrid F1 seeds via enhancement of endogenous GA4 content in Oryza sativa L. pistils. The change in style length might be an adaptation of rice cultivation from south to north in the northern hemisphere.The style length (SYL) in rice is one of the major factors influencing the stigma exertion, which affects the outcross rate of male sterile line and the yield of hybrid F1 seeds. However, the biological mechanisms underlying SYL elongation remain elusive. Here, we report a map-based cloning and characterisation of the allele qSYL3-k. The qSYL3-k allele encodes a MADS-box family transcription factor, and it is expressed in various rice organs. The qSYL3-k allele increases SYL via the elongation of cell length in the style, which is associated with a higher GA4 content in the pistil. The expression level of OsGA3ox2 in pistils with qSYL3-k alleles is significantly higher than that in pistils with qSYL3-n allele on the same genome background of Nipponbare. The yield of F1 seeds harvested from plants with 7001SSYL3−k alleles was 16% higher than that from plants with 7001SSYL3−n allele. The sequence data at the qSYL3 locus in 136 accessions showed that alleles containing the haplotypes qSYL3AA, qSYL3AG, and qSYL3GA increased SYL, whereas those containing the haplotype qSYL3GG decreased it. The frequency of the haplotype qSYL3GG increases gradually from the south to north in the northern hemisphere. These findings will facilitate improvement in SYL and yield of F1 seeds henceforward.

The Effect of Night Low Temperature on Agronomical Traits of Thirty-Nine Pepper Accessions (Capsicum annuum L.)

Pepper plants are subject to complex environmental factors including abiotic and biotic stresses in fields, as well as the significant effects of climate changes, including low and high temperatures. Low temperature stress in the growth and development of pepper plants is one of the most critical issues, and directly impacts the crop yield and productivity of pepper plants. Therefore, it is essential to select and breed low temperature-(LT) tolerant pepper (Capsicum annuum L.) cultivars. This research was conducted to assess the agronomical traits of 39 pepper accessions belonging to the chili and bell fruit varieties which were cultivated under two different night temperature set-points: at 15 °C for a suboptimal temperature (CT) and at 10 °C for a low temperature (LT). The plant heights (PH) of most pepper accessions in a LT were significantly decreased compared to those in a CT. The stem diameter (SD) and the length of main axis (LMA) varied depending on the genotypes under LT. Moreover, the number of flowers (NFL), total number of fruits (NFR), fruit yield (FY), fruit fresh weight (FFW), fruit length (FL), fruit diameter (FD), and number of seeds in a fruit (NSF) remarkably declined in a LT compared to in a CT. The evaluated agronomical traits between LT and CT were further applied for the correlation analysis, principal component analysis (PCA), and hierarchical cluster analysis. Notably, the FY trait was correlated with other reproductive traits including NFR, FFW, FD, and FL on the positive directions and thirty-nine LT-treated pepper accessions were clustered into seven groups by the hierarchical clustering analysis. The selected accessions were primarily involved in the positive trends with the reproductive index including NFR, FL, FD, and FFW traits and could be used for pepper breeding programs to develop LT-tolerant cultivars.

Impact of seed treatments on emergence, growth, seed yield and quality of okra (Abelmoschus Esculentus L.)

Okra is one of the most important summer vegetables, which is vulnerable to biotic and abiotic factors, which adversely affect its germination, growth, and yield. So, this study was undertaken to evaluate the impact of different chemicals alone and in combination on crop performance from seed germination to seed production. For this purpose, seeds of okra cv. Sabz Pari were treated with different chemicals (Thiophanate, Potash, Zinc sulphate, Rodamine and Humic Acid in combinations) along with non-treated control. Results of the present study showed that seed treatments with T7 {Potash (0.5 g) + Humic Acid (0.25 g) + Zinc sulphate (0.08 g) + Rodamine (0.5 g) + Thiophanate (0.5 g) per kg of seeds} took the minimum time (3 days) to attain 50% emergence, while non-treated seeds took 6.5 days with an emergence percentage 90.8% and 70.5%, respectively. Moreover, this combination of seed treatment in T7 depicted the highest seedlings shoot length (10.8 cm), root length (5.3 cm), seedling fresh (1.01 g) and dry weight (0.148 g) and chlorophyll contents (28.6 SPAD units) as compared to control. In field, T7 significantly increased plant height (120.7 cm), pod length (15.8 cm) and number of seeds per pod (68.7) and 1000 seed weight (58.56 g). Therefore, this combination {(Potash (0.5 g/kg of seed) + Humic Acid (0.25 g/kg of seed) + Zinc sulphate (0.08 g/kg of seed) + Rodamine (0.5 g/kg of seed) + Thiophanate (0.5 g/kg of seed)} can be utilized for good quality seed production.

DO SEEDS OF Anadenanthera macrocarpa AND Pityrocarpa moniliformis FORMED IN DIFFERENT LOCATIONS OF THE FRUIT HAVE SIMILAR PHYSIOLOGICAL QUALITY?

Trees of the Fabaceae family can produce seeds with contrasting size and germinative performance depending on the region where they were formed in the fruit. Such differences reduce the physiological quality of the seed lot. Thus, the aim of the present study was to evaluate the physiological quality of seeds formed in different seminal nucleus of the fruits of Anadenanthera macrocarpa and Pityrocarpa moniliformis and their implications for the final composition of the seed lot. The biometric characterization of the fruits was performed with four quantitative descriptors (length, width, thickness, and number of seeds per fruit). Then, seeds formed in seminal nucleus of the proximal, intermediate, and distal regions of the fruit were measured (length, width, and thickness) and evaluated using germination and vigor tests (germination speed, length, and dry weight of seedlings). Seeds from these species have biometric differences depending on their origin in the fruit, in which those formed in the seminal nucleus of the intermediate region of the fruit are larger than the other ones. The origin of the seeds of A. macrocarpa and P. moniliformis formed in different seminal nucleus of the fruit do not show differences in physiological quality. Therefore, the sorting of seeds originated in different regions of the fruit does not benefit the final quality of the seed lots of these species.

Weak Geographical Structure of Juniperus sabina (Cupressaceae) Morphology despite Its Discontinuous Range and Genetic Differentiation

In Europe, Juniperus sabina L. is a mountainous, rare species that creates small, scattered populations, suggesting their refugial nature. Recently, a new variety of this juniper, J. sabina var. balkanensis R. P. Adams et A. N. Tashev was described based on genetic studies. We expected morphological differentiation among isolated parts of the species range and between varieties, as was the case with other Mediterranean junipers. Cones, seeds and fragments of shoots from a total of 506 individuals were collected from 24 populations in Europe and for comparisons from three populations from Tian Shan. Almost all of the 16 analysed features significantly differentiated among populations and geographical regions as well as between the varieties, although most groups differed from others only in terms of a single feature. The thickness of cones, the width of shoots and the length of seeds were the most important features for differentiation. The geographical structure of the variation of J. sabina was weak, and comparative populations from Tian Shan were clustered with European populations, similar to the findings of a previous study on essential oils. We found slightly different patterns of variation of the two varieties of the species. The little intra-species differentiation could be the result of the long period of contact between nowadays distinct populations and their relatively late separation in the early Holocene.

Gelatin Reinforced with CNCs as Nanocomposite Matrix for Trichoderma harzianum KUEN 1585 Spores in Seed Coatings.

Increasing interest on sustainable agriculture has led to the development of new materials which can be used as seed coating agents. In this study, a new material was developed based on gelatin film reinforced with cellulose nanocrystals (CNC) which was further used as nanocomposite matrix for Trichoderma harzianum KUEN 1585 spores. The nanocomposite films were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and scanning electron microscopy (SEM), showing the formation of new hydrogen bonds between the components with a good compatibility between them. Measurements of water contact angles and tests of water vapor sorption and swelling degree revealed an improvement in the water vapor absorption properties of the films as a result of their reinforcement with CNC. Furthermore, by adding the Trichoderma harzianum KUEN 1585 spp. in the seed coating material, the germination percentage, speed of germination and roots length of the corn seeds improved. The polymeric coating did not inhibit the growth of T. harzianum KUEN 1585, with this material being a good candidate in modern agriculture.

Preliminary study on morphological diversity of cowpea accessions [Vigna unguiculata (L.) Walp.] collected in the North of Côte d’Ivoire

The collection and characterization of the diversity of local cowling ecotypes is an important lever in defining the species’ strategies for varietal improvement. The purpose of this study was to generate information on the diversity of cowpea [Vigna unguiculata (L.) Walp.] cultivars in the savannah area of Côte d’Ivoire. Collecting missions were carried out from December 2017 to February 2018, among farmers and traders in nine departments in the north of Côte d’Ivoire. These missions brought together 48 local cowpea ecotypes in seed form. These accessions were characterized on the basis of eight morphological characters, including two quantitative characters (weight of 100 seeds and length of seeds) and six qualitative characters (color, shape, presence of stain, appearance, eye shape and color around the hilum of seed). Overall, the results showed considerable variability in seed coat coloration in varying proportions. Overall, 35.42% of the samples collected were white, 33.33% were red and 31.25% were other colors. The Multiple Correspondence analysis carried out using all the qualitative characters made it possible to group the 48 accessions collected into 16 morphological groups or morphotypes with distinct characteristics. In addition, they reflect a good part of the morphological diversity of cowpea accessions from the north of Côte d'Ivoire that could be exploited in varietal selection programs for the species.

Effects of seed priming with ascorbic acid to mitigate salinity stress on three wheat (Triticum aestivum L.) cultivars.

In this study, the effect of seed priming using ascorbic acid (ASA) on three commercial wheat cultivars i.e., Punjab-2011, Faisalabad-2008, and Ujala-2016 under salinity stress in both homogenous and heterogeneous environments has been investigated. It revealed that different levels of salinity have significantly reduced the growth attributes like percent germination, germination index, radical & plumule length, seed vigor index (In-vitro), seedling length, fresh & dry weight, and total chlorophyll content (In-vivo) with subsequent treatments. Salinity stress was induced by using NaCl in three different concentrations (100, 150, and 200 mM). Seeds of the three cultivars primed with 50, 100, and 150 mg/L ascorbic-acids have not only improved percent germination but also considerably reduced germination time and increased germination index (GI) indicating the potential for tolerating saline conditions. Seedling growth (seedling length, Fresh weight, and dry weight) of seeds primed with 50, 100, and 150 mg/L (ASA) was significantly higher than other non-primed seeds under the prevailing saline conditions. Hormonal priming with different concentrations of ascorbic acid was effective, nevertheless, the best results were obtained with 100 and 150 mg/L (ASA) concentrations. We concluded that the delay in germination and seedling growth was mainly due to excessive Na+ accumulation in the seeds of wheat cultivars. On the other hand, seed priming with various concentrations of ascorbic acid has proved to be effective in inducing salt tolerance in terms of germination parameters, seedling characteristics, and chlorophyll retention in the three local commercial wheat cultivars.

Performance evaluation and stability analysis of malt barley (Hordeum vulgare L.) varieties for yield and quality traits in Eastern Amhara, Ethiopia

BackgroundBarley (Hordeum vulgare L.) is an annual cereal crop that belongs to the grass family Poaceae of the tribe Triticeae. It is the fifth most important cereal crop after teff, wheat, maize and sorghum in area coverage in Ethiopia. Important malting barley characteristics include kernel size, kernel protein content, extractable malt and diastatic power. Malt barely is an important crop in the study area; however, the productivity is low in the area varying from 15 kg ha−1 to 21 kg ha−1. The aim of the study was to identify high yielding, standard quality and stable malting barley variety to the study areas and similar agro-ecologies. Field experiments were conducted using eight improved malt barely varieties during the main cropping seasons (from the first week of July to end of October) in 2016 and 2017 at two selected sites Dehana (Amede work) and Lalibela (Medagai)) in north east Ethiopia. Data on grain yield and yield related traits, and quality attributes were recorded. Days to 50% heading (DH), and days to 90% maturity (DM) were recorded on plots basis. Plant height (PH, in cm), spike length (SPL, in cm), and number of seeds per spike (SPS) were measured on five randomly selected plants per plot of the central four rows. Mean grain yield (GY; grams of grain produced per plot, converted in kg ha−1), above ground dry biomass or biological yield (BY; dry weight of the above ground harvested biomass grams per plot, in kg ha−1) and thousand grain weight (TGW; weight of 1000 kernels, in grams) were measured on whole plots. Data were analyzed using SAS software program and significance of the mean difference was tested in least significant difference Test (LSD).ResultThe analysis of variance for grain yield and quality traits showed that the main effects of both genotypes and environments, and their interaction effect, were highly significant (P ≤ 0.01). The environment main effect accounted for 42%, 38% and 50% of the total grain yield, thousand kernel weight and kernel protein content variation, respectively. The average grain yield across varieties varied from 1652 kg ha−1 to 3377 kg ha−1.ConclusionsThree malting barley varieties (IBON174/03, EH1847 and Bahati) were found to be relatively high yielding, stable for grain yield and full fill the quality parameters. Therefore, these varieties are recommended for production. A further study is required on agronomic practices and brewing quality attributes in malt barley.

Evaluation of genetic diversity and association mapping for seed weight and size in vegetable soybean germplasm

AbstractEdamame is a vegetable‐typesoybean [Glycine max (L.) Merr.] with large seed size, typically twice that of commodity soybean. Understanding the genetic diversity among large‐seeded germplasm as well as the genetic variation for seed size in the germplasm pool is important for edamame breeding. The objectives of this study were to analyze the genetic diversity of 343 edamame soybean accessions and 36 breeding lines, and to identify quantitative trait loci (QTLs) associated with seed weight (SW), seed volume (VOL), seed length (SL), seed breadth (SB), and seed height (SH) through genome‐wide association studies. We observed two main genetic groups among the 343 accessions and found that the breeding lines were genetically dissimilar to germplasm accessions. Through single‐ and multi‐locus models, a total of two, two, seven, one, and four SNPs were reported to be associated with SW, VOL, SL, SB, and SH located across two, two, five, one, and four chromosomes, respectively. There were three SNPs associated with SL, SB, and/or SH that were not found to be within a previously reported SL, SB, or SH QTL. The SNP ss715587475, positioned at the 24.9‐Mb position on chromosome 4, was located within the gene Glyma04g21680 which was associated with SW in Arabidopsis and may be a candidate gene for SW in edamame soybean. There were four additional SNPs positioned within genes that encode proteins that may relate to plant growth and development in soybean. Identifying and pyramiding favorable alleles for seed size and weight will enhance edamame breeding efforts.

Broadacre Crop Yield Estimation Using Imaging Spectroscopy from Unmanned Aerial Systems (UAS): A Field-Based Case Study with Snap Bean

Accurate, precise, and timely estimation of crop yield is key to a grower’s ability to proactively manage crop growth and predict harvest logistics. Such yield predictions typically are based on multi-parametric models and in-situ sampling. Here we investigate the extension of a greenhouse study, to low-altitude unmanned aerial systems (UAS). Our principal objective was to investigate snap bean crop (Phaseolus vulgaris) yield using imaging spectroscopy (hyperspectral imaging) in the visible to near-infrared (VNIR; 400–1000 nm) region via UAS. We aimed to solve the problem of crop yield modelling by identifying spectral features explaining yield and evaluating the best time period for accurate yield prediction, early in time. We introduced a Python library, named Jostar, for spectral feature selection. Embedded in Jostar, we proposed a new ranking method for selected features that reaches an agreement between multiple optimization models. Moreover, we implemented a well-known denoising algorithm for the spectral data used in this study. This study benefited from two years of remotely sensed data, captured at multiple instances over the summers of 2019 and 2020, with 24 plots and 18 plots, respectively. Two harvest stage models, early and late harvest, were assessed at two different locations in upstate New York, USA. Six varieties of snap bean were quantified using two components of yield, pod weight and seed length. We used two different vegetation detection algorithms. the Red-Edge Normalized Difference Vegetation Index (RENDVI) and Spectral Angle Mapper (SAM), to subset the fields into vegetation vs. non-vegetation pixels. Partial least squares regression (PLSR) was used as the regression model. Among nine different optimization models embedded in Jostar, we selected the Genetic Algorithm (GA), Ant Colony Optimization (ACO), Simulated Annealing (SA), and Particle Swarm Optimization (PSO) and their resulting joint ranking. The findings show that pod weight can be explained with a high coefficient of determination (R2 = 0.78–0.93) and low root-mean-square error (RMSE = 940–1369 kg/ha) for two years of data. Seed length yield assessment resulted in higher accuracies (R2 = 0.83–0.98) and lower errors (RMSE = 4.245–6.018 mm). Among optimization models used, ACO and SA outperformed others and the SAM vegetation detection approach showed improved results when compared to the RENDVI approach when dense canopies were being examined. Wavelengths at 450, 500, 520, 650, 700, and 760 nm, were identified in almost all data sets and harvest stage models used. The period between 44–55 days after planting (DAP) the optimal time period for yield assessment. Future work should involve transferring the learned concepts to a multispectral system, for eventual operational use; further attention should also be paid to seed length as a ground truth data collection technique, since this yield indicator is far more rapid and straightforward.

Agro-Morphological and Molecular Variability among Algerian Faba Bean (Vicia faba L.) Accessions

Faba bean (Vicia faba L.) Algerian accessions represent an essential source of traits of interest for crop improvement, especially for tackling climate change, because their genetic background and potential have not been well studied. The purpose of this research was to assess the genetic variability of 14 Algerian faba bean accessions by means of 10 agro-morphological traits and 7 simple sequence repeat markers (SSRs). ANOVA analysis showed a large significant phenotypic variation in fruit setting (FS), seed length (SL), seed width (SW), and 100-seeds weight (HSW), which arose as the main discriminant characters as revealed by principal component analysis (PCA). In addition, SSR analysis identified a total of twenty different alleles within our collection with a mean of 2.85 alleles per locus. The polymorphism information content (PIC) ranged from 0.32 to 0.58, with a mean of 0.44. Observed heterozygosity (Ho) ranged from 0.57 to 1.00 with a mean of 0.72, while the expected one (He) varied from 0.42 to 0.67, reaching a mean of 0.57. Based on agro-morphological as well as molecular data, the 14 accessions were not clustered according to the geographical pattern, as also confirmed by principal coordinate analysis (PCoA). Moreover, AMOVA highlighted that most of the overall genetic variation within our collection was the result of strong differentiation among accessions (84%). Finally, the Mantel test revealed that there was no substantial correlation between the molecular and agro-morphological traits (r = −0.025, p > 0.05). These findings represent a first step toward faba been breeding programs establishment in Algeria, indicating that our collection exhibited optimal agro- and molecular diversity to identify specific traits useful in Mediterranean environment.

↵Analysis of Trait Association and Genetic Diversity in Garden Pea (Pisum sativum L.) Genotypes under Middle Gangetic Plain Region of India

Background: Garden pea is a cool season vegetable crop cultivated extensively throughout the world. Besides nutritional quality it also boosts soils through the fixation of atmospheric nitrogen. The most important task of pea breeding is to develop varieties with high and stable production, different maturity types and resistance against biotic and abiotic stresses. To fulfil these objectives, analysis of genetic diversity is the prerequisite to choose genetically diverse parents for a successful hybridization program and to know the source of genes for a particular trait within the available germplasm. Methods: A study was conducted at ICAR-Indian Institute of Vegetable Research (IIVR), Varanasi during 2015, using principle component analysis, correlation analysis and stepwise regression analysis approaches to assess the genetic diversity present in 160 pea genotypes for the identification of diverse parents for use in crop improvement. Result: Based on the phenotypic data, three superior genotypes VRPD-2, VRPR-15 and VRP-292 were identified on the basis of pod yield, number of pods per plant, ten pod weight, pod length and number of seeds per pod whereas three other genotypes VRPE-45-1, VRPE-55 and VRPE-36 were found early flowering. Principle Component Analysis revealed that first four principle components contributed to 85% of the total variation so these four were given due importance for further explanation. Stepwise multiple regression analysis revealed that number of pods per plant, ten pod weight and number of internode for first pod were the best predictors of pod yield per plant.

GENETIC VARIABILITY IN JUVENILE CHARACTERS OF PROGENIES OF Apuleia leiocarpa

The objective of this search was to quantify the genetic variability in progenies from grápia mother trees in natural populations, for initial growth characters of the seedlings. Seeds were collected from 13 mother trees, from four origins, located in the municipalities of Pareci Novo, São José do Sul and Aratiba in RS, and Seara in SC, as well as data from plants and place of origin. Biometrics were performed on 100 seeds lot from each mother tree, and an experiment was installed to evaluate progenies in a completely randomized design. It was evaluated the seedling emergence speed and the emergence percentage, the stem diameter and seedlings height, as well as the final survival percentage. A significative difference was found for all variables observed for seeds and seedlings of grápia mother trees. Seed length and width demonstrated high values for individual heritability in the narrow sense (above 0.6), being possible to use the seed size for an analysis of genetic variability between plants of the species, but not as an indicative variable of physiological quality and vigor. The correlation analysis indicated that the seedling emergence percentage is related to the characteristics of the mother plant plant (height and diameter). Thus, the use of seedlings for forest restoration areas is appropriate, as they have indications of genetic diversity.

Eco-friendly bioprocess using agar plug immobilized Penicillium crustosum PWWS-6 biomass for treatment of wastewater contaminated with toxic Congo red dye for use in agriculture

Recycling and valorization of noxious dye contaminated industrial wastewater minimize prevailing agricultural water dearth. In this context, the current manuscript investigates and fabricates a rapid, ecofriendly, and cost effective treatment system using a potent dye degrading microbial agent. An agar plug immobilized Penicillium crustosum PWWS-6, a filamentous fungus isolated from veterinary clinical waste dump, for the first time reported to decolorize (81.86 ± 0.03 %) hazardous diazo dye, (Congo red, 100 ppm) in 24 h. Lignin peroxidase, azo reductase, veratryl alcohol oxidase, and NADH-DCIP reductase enzymes were induced significantly during mycoremediation bioprocess which is affected by incubation time, temperature, pH, inoculum volume, and dye concentration of aqueous medium. The one-factor-at-a-time (OFAT) and response surface methodology (RSM) were adopted to optimize these cultural parameters and generated optimized conditions (incubation time, 16 h; temperature, 27 °C; and inoculum volume, 6 fungal discs), for maximum degradation (99.85 %) of 100 ppm CR at pH 7.0. Further, using OFAT approach, P. crustosum also showed 72.14 % degradation of CR at much higher concentration of 1000 ppm in 72 h. UV–vis spectra verified complete disappearance of dye from colored broth. Fourier Transform Infrared (FTIR) spectroscopy along with Field Emission Scanning Electron Microscopy (FESEM) subsequently confirmed (–N=N–) bond destabilization following degradation. Furthermore, the non-toxic degraded metabolites showed improved percent germination, radical and plumule length of Cicer arietinum and Hordeum vulgare seeds compared with untreated CR contaminated wastewater.

Nanopriming with phytosynthesized zinc oxide nanoparticles for promoting germination and starch metabolism in rice seeds

The application of zinc oxide nanoparticles (ZnO NPs) in agricultural field is emerging and relatively new. In this work, a simple, cost-efficient, non-toxic and eco-friendly method for the green synthesis of ZnO NPs by Senna occidentalis leaf extract has been described. Techniques used to characterize nanoparticles (NPs) were X-ray diffractometer (XRD), UV visible spectroscopy, Particle size analyzer (PSA), Fourier transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM). In this study, green synthesized ZnO NPs at 20−40 mg/l solution was used to prime aged seeds of early flowering homozygous mutant (BM6) of Pusa basmati (Oryza sativa), which enhanced germination performance and seedling vigor significantly as compared to zinc sulphate (ZnSO4) priming and conventional hydropriming. The effect of treatment was analyzed by measuring biophysical and biochemical parameter of germinating rice seeds. The seeds treated with ZnO NPs of 20 mg/l concentration showed more than 50 % stimulation in dry weight, relative water uptake of seeds and radicle length of seedling in comparison to other priming solution and control (hydro-primed). Significant growth was also observed in plumule length and fresh weight of seeds in ZnO NPs at 20 mg/l concentration in comparison to control and other priming treatments. At the same concentration of ZnO NPs, there was 23 % stimulation reported in total soluble sugar content and 45 % stimulation in amylase activity. There was also a substantial increase in antioxidant enzymes i.e. superoxide dismutase (SOD), catalase (CAT) and ascorbate peroxidase (APX) activity. Seed priming represents an innovative user-friendly approach to enhance the germination rate, starch metabolic process and triggered zinc acquisition of rice aged seed as an alternative to the conventional priming method.

Salt Tolerance Mechanism of the Rhizosphere Bacterium JZ-GX1 and Its Effects on Tomato Seed Germination and Seedling Growth.

Salinity is one of the strongest abiotic factors in nature and has harmful effects on plants and microorganisms. In recent years, the degree of soil salinization has become an increasingly serious problem, and the use of plant growth-promoting rhizobacteria has become an option to improve the stress resistance of plants. In the present study, the salt tolerance mechanism of the rhizosphere bacterium Rahnella aquatilis JZ-GX1 was investigated through scanning electron microscopy observations and analysis of growth characteristics, compatible solutes, ion distribution and gene expression. In addition, the effect of JZ-GX1 on plant germination and seedling growth was preliminarily assessed through germination experiments. R. aquatilis JZ-GX1 was tolerant to 0–9% NaCl and grew well at 3%. Strain JZ-GX1 promotes salt tolerance by stimulating the production of exopolysaccharides, and can secrete 60.6983 mg/L of exopolysaccharides under the high salt concentration of 9%. Furthermore, the accumulation of the compatible solute trehalose in cells as the NaCl concentration increased was shown to be the primary mechanism of resistance to high salt concentrations in JZ-GX1. Strain JZ-GX1 could still produce indole-3-acetic acid (IAA) and siderophores and dissolve inorganic phosphorus under salt stress, characteristics that promote the ability of plants to resist salt stress. When the salt concentration was 100 mmol/L, strain JZ-GX1 significantly improved the germination rate, germination potential, fresh weight, primary root length and stem length of tomato seeds by 10.52, 125.56, 50.00, 218.18, and 144.64%, respectively. Therefore, R. aquatilis JZ-GX1 is a moderately halophilic bacterium with good growth-promoting function that has potential for future development as a microbial agent and use in saline-alkali land resources.

Diversity in fruit and seed morphology of wooden banana (Entandrophragma bussei Harms ex Engl.) populations in Tanzania

Entandrophragma bussei (wooden banana) is a high value indigenous multipurpose tree species prioritized for domestication in Tanzania. However, we lack adequate information on genetic and phenotypic variation to support domestication processes, while utilization pressure on the remaining stocks and deforestation are intensified. The study evaluated the diversity in fruit and seed morphology of three wild populations of E. bussei found in three agroecological zones of Tanzania. Data on fruit (length, width, weight and number of seeds per fruit) and seed (length, width and weight) traits were evaluated. To detect differences in means among the populations, one-way Analysis of Variance (ANOVA) was performed. There were variations in fruit and seed morphological traits among the studied populations. Ruaha population had significantly higher fruit length (19.31 ± 0.1 cm), width (7.71 ± 0.12 cm) and number of seeds per fruit (22 ± 0.48) than Kigwe (15.65 ± 0.14 cm, 4.85 ± 0.17 cm, 20 ± 0.45), and Tarangire (16.84 ± 0.1 cm, 5.40 ± 0.12 cm, 20 ± 0.37) populations. Ruaha (62.46 ± 1.37 g) and Tarangire (60.71 ± 1.12 g) had significantly heavier fruits than Kigwe (56.53 ± 1.28 g). Kigwe population had significantly higher seed width (1.80 ± 0.01 cm) and weight (0.83 ± 0.01 g) than Ruaha (1.75 ± 0.01 cm, 0.75 ± 0.01 g) and Tarangire (1.65 ± 0.01 cm, 0.77 ± 0.01 g) populations. Among the populations Tarangire had higher seed length (9.60 ± 0.06 cm) than the rest. Overall, there is a considerable fruit and seed morphological diversity among the E. bussei populations offering opportunities for selection of domestication cultivars and gene pool conservation.