Sedimentary Protoliths Research Articles

Detrital zircon U-Pb-Hf isotopes of late Meso-Neoproterozoic metasedimentary rocks in the South Altyn Tagh: Implications for tectonic affinity of microcontinents in NW China

The Neoproterozoic tectonic correlation between the Central-South Altyn, Qilian, Qaidam, and East Kunlun blocks in northwestern China remains controversial, with competing models favoring separate blocks or a unified single block, and debatable paleo-positions in the Rodinia supercontinent. In this study, we present a systematic provenance study on the late Mesoproterozoic to Neoproterozoic metasedimentary rocks from the South Altyn Tagh. A mica quartz schist sample from the Bashikuergan group yielded a maximum depositional age of 1050 ± 31 Ma. Four paragneiss samples from the Altyn Complex yielded maximum depositional ages of 1106 Ma, 1065 Ma, 1054 Ma, and 870 Ma. Given that the Altyn Complex was intruded by numerous early Neoproterozoic granitoids (ca. 976–900 Ma), we propose that the sedimentary protoliths of the Altyn Complex and the Bashikuergan Group were deposited at two stages, i.e., ca. 1105–975 Ma and after 870 Ma. Provenance tracing indicates that these 1105–975 Ma sediments probably received detritus from the late Mesoproterozoic rocks of Western Australia, East Antarctica, and Central Indian Tectonic Zone in India. In contrast, the detritus of the paragneiss (deposited after 870 Ma) was likely sourced from local regions in the Altyn Tagh orogen. Combined with the comparable magmatic, sedimentary, and tectonic records, we propose that a few microcontinental fragments in northwestern China, including Central-South Altyn Tagh, Qilian, Qaidam, and East Kunlun blocks, constituted a unified block in the early Neoproterozoic and occupied a periphery position of the Rodinia supercontinent with a close paleogeographic affinity to South China and Northwest India.

Kyanite and Cordierite‐Andalusite occurrences in parts of Barrow's Staurolite zones – The effects of high ferric iron

AbstractGeorge Barrow's maps (1893, 1912) of the metamorphic zones named after him in the south‐eastern Scottish Highlands, show a prominent staurolite zone running from the west of Glen Clova to the North Sea coast near Stonehaven in the east. Pelitic mica schists throughout this zone commonly show principal mineral assemblages of staurolite+biotite+garnet+muscovite +quartz (St + Bt + Grt), with sodic plagioclase, ilmenite and sometimes magnetite as common accessories; these schists have bulk compositions corresponding with those of common Dalradian metasediments. However, the mineral assemblages on the low‐ and high‐grade margins of the staurolite zone show evidence of changes from west to east. Lower grade assemblages near Stonehaven include chloritoid+biotite, which has not been found further west in the classic ‘Barrovian’ sequence; whilst the higher grade assemblages near Stonehaven lack kyanite, which is widely seen further west. The Stonehaven area has been suggested to have under gone metamorphism at lower pressure (P) than the classic region of the ‘Glens’ inland to the west.This paper describes the occurrence at middle grade in the broad staurolite zone, of unusual bulk rock compositions showing high ratios of Fe2O3/(Fe2O3 + FeO) and MgO/(MgO + FeO) (abbreviated to M/FM). The high M/FM assemblages are distinct from those of the common St‐Bt‐Grt schists. The high ratios of ferric to ferrous iron are thought to result from original sedimentary protolith compositions, that led to metamorphism at relatively high conditions of oxygen fugacity (ƒo2), and resulted in the formation of haematite‐bearing assemblages, rather than ones carrying accessory ilmenite and magnetite as in the common St + Bt + Grt rocks.In the west (Glen Lethnot), the haematite‐bearing pelites show the occurrence of kyanite at a distinctly lower grade than the common (haematite‐free) pelites, and a transition from staurolite‐biotite (St + Bt) through staurolite–kyanite‐biotite (St + Ky + Bt) to kyanite‐biotite (Ky‐Bt) assemblages occurs with increasing abundance of haematite and higher bulk M/FM values. In all bulk compositions, the upgrade formation of kyanite may be associated with the movement of the St + Ky + Bt assemblage to lower M/FM bulk compositions with increasing temperature (T). The difference in the temperature of lowest‐grade kyanite formation in haematite‐rich schists, compared with that in common haematite‐free schists may approach 50°C.In the east (Stonehaven section), the haematite‐bearing assemblages are much rarer than in Glen Lethnot, but those found so far are very distinctive in showing large porphyroblasts of probable cordierite (typically altered to chlorite and sericite). Occasional assemblages of andalusite‐cordierite‐biotite (And‐Crd‐Bt) also occur in the haematite‐bearing rocks and confirm lower pressures of metamorphism near Stonehaven than those seen further west in Glens Clova, Lethnot and Esk.

The Manhattan Schist, New York City: Proposed Sedimentary Protolith, Age, Boundaries, and Metamorphic History

There are some persistent basic questions pertaining to the bedrock schist of New York City (NYC). How many mappable schist formations are exposed in NYC, and what was the sedimentary protolith of the Manhattan schists? Our proposed answers are based in part on a blending of published paleontological and radiometric dating results that constrain the timing of Taconic subduction and the best choice of a pelitic protolith for the schists of NYC. We have chemically analyzed some samples of schist and shales at key locations to evaluate the plausibility of our proposals. The compelling published evidence indicates that the Taconic Orogeny began about 475 Ma, when peri-Laurentian plates began the process of east-dipping subduction under the Moretown Terrane, resulting in a magmatic flareup of the Shelburne Falls arc that carried the Moretown Terrane west across NYC. East-dipping subduction accounts for early Ordovician metamorphism until an oceanic slab break-off event at about 466 Ma. Our review of the biostratigraphic data indicates a continuation of subduction and the deposition of pelitic sediments until about 455 Ma, during the transition to deep-water turbiditic sediment deposition. This disqualifies all post-455 Ma turbidites as viable protoliths for the NYC Manhattan schists but does include the Late Cambrian to lowermost Late Ordovician pelites of the Jutland Sequence that are exposed directly west of NYC in New Jersey. Our new chemical analyses of Jutland sediments and each of the three named schists from the NYC plot as a single geochemical population. We, therefore, propose that the schists of NYC could collectively be referred to as the Manhattan schist of the Late Cambrian to lower Late Ordovician.

Hydration of mafic crustal rocks at high temperature during brittle‐viscous deformation along a strike‐slip plate boundary

AbstractThe Poroshiri ophiolite (Hidaka metamorphic belt, Japan) occurs within a crustal‐scale network of high‐temperature, dextral shear zones that accommodated hundreds of kilometres of displacement due to the opening of the Japan Sea in the Neogene. The opholitic rocks comprise ultramafic, mafic and sedimentary protoliths that have been variably hydrated and metamorphosed. This work investigates the mechanisms and timing of fluid influx relative to viscous deformation in metagabbros and amphibolites deformed during exhumation from granulite‐ to amphibolite‐facies conditions. We consider a range of microstructures, from low strain domains and 1–2 mm thick shear bands to mylonites with a thickness of a few meters. Low strain domains of metagabbros exhibit corona textures with symplectites consisting of pargasitic amphibole (Ed0.7) ‐ anorthitic plagioclase (An80–92) ± orthopyroxene ± clinopyroxene forming around olivine and igneous pyroxene and with similar plagioclase–amphibole‐orthopyroxene ± clinopyroxene granoblastic aggregates in micrometric‐thick fractures. These textures result from hydration under low fluid‐rock ratio, with elevated H2O content only occurring locally (H2O > 1–1.2 wt%). Igneous mineral replacement leads to grain size reduction from 1 mm to ~10 μm. Amphibole exhibits a strong core‐rim zonation primarily controlled by the high diffusivity of Fe, Mg and OH and the low diffusivity of Al. Mineral compositional equilibrium is achieved at the scale of 100–200 μm. In mm‐thick localized shear bands and in metric‐scale mylonitic amphibolites, the heterogeneous mineral composition of amphibole (Ed0.2–0.5) and plagioclase (An40−An80) indicates only partial re‐equilibration (at the scale of 200–500 μm) despite higher fluid‐rock ratios and more pervasive fluid percolation than in metagabbros. Plagioclase–amphibole thermometry and equilibrium phase diagrams indicate that the initial fluid infiltration and corona formation occurred at 800–850°C by fracturing and percolation along grain boundaries. This was followed by the main fluid percolation and mylonitization event, which occurred during exhumation and cooling at conditions of 720–580°C, ~4 kbar. Continuous hydration during retrogression was achieved by the influx of dominantly seawater‐derived fluid, as attested by the high chlorine (Cl) contents (>300–400 ppm) of amphiboles in fractures. The heterogeneous distribution of fractures controls the distribution of fluid from the earliest stages of hydration, creating positive feedback where the growth of hydrous minerals as amphibole (up to +300 vol% of amphibole in high strain areas relative to the low‐strain ones) and the formation of fine‐grained mixed domains that led to further localization of viscous strain and mass transfer (variations of ± 30–40% in major elements). The Poroshiri ophiolite therefore represents a good fossil example of a former transpressional plate boundary where coupled metamorphic and deformation processes were triggered by seawater‐derived fluid that percolated to depths of ~15 km.

Effect of chemical abrasion of zircon on SIMS U–Pb, δ18O, trace element, and LA-ICPMS trace element and Lu–Hf isotopic analyses

Abstract. This study assesses the effect of chemical abrasion on in situ mass spectrometric isotopic and elemental analyses in zircon. Chemical abrasion improves the U–Pb systematics of SIMS (secondary ion mass spectrometry) analyses of reference zircons, while leaving other isotopic systems largely unchanged. SIMS 206Pb/238U ages of chemically abraded reference materials TEMORA-2, 91500, QGNG, and OG1 are precise to within 0.25 % to 0.4 % and are within uncertainty of chemically abraded TIMS (thermal ionization mass spectrometry) reference ages, while SIMS 206Pb/238U ages of untreated zircons are within uncertainty of TIMS reference ages where chemical abrasion was not used. Chemically abraded and untreated zircons appear to cross-calibrate within uncertainty using all but one possible permutation of reference materials, provided that the corresponding chemically abraded or untreated reference age is used for the appropriate material. In the case of reference zircons QGNG and OG1, which are slightly discordant, the SIMS U–Pb ages of chemically abraded and untreated material differ beyond their respective 95 % confidence intervals. SIMS U–Pb analysis of chemically abraded zircon with multiple growth stages is more difficult to interpret. Treated igneous rims on zircon crystals from the S-type Mount Painter Volcanics are much lower in common Pb than the rims on untreated zircon grains. However, the analyses of chemically abraded material show excess scatter. Chemical abrasion also changes the relative abundance of the ages of zircon cores inherited from the sedimentary protolith, presumably due to some populations being more likely to survive the chemical abrasion process than others. We consider these results from inherited S-type zircon cores to be indicative of results for detrital zircon grains from unmelted sediments. Trace element, δ18O, and εHf analyses were also performed on these zircons. None of these systems showed substantial changes as a result of chemical abrasion. The most discordant reference material, OG1, showed a loss of OH as a result of chemical abrasion, presumably due to dissolution of hydrous metamict domains or thermal dehydration during the annealing step of chemical abrasion. In no case did zircon gain fluorine due to exchange of lattice-bound substituted OH or other anions with fluorine during the HF partial dissolution phase of the chemical abrasion process. As the OG1, QGNG, and TEMORA-2 zircon samples are known to be compositionally inhomogeneous in trace element composition, spot-to-spot differences dominated the trace element results. Even the 91500 megacrystic zircon pieces exhibited substantial chip-to-chip variation. The light rare earth elements (LREEs) in chemically abraded OG1 and TEMORA-2 were lower than in the untreated samples. Ti concentration and phosphorus saturation ((Y + REE) / P) were generally unchanged in all samples.

Recognition of Neogene tin mineralization in the Southeast Asian tin belt

Abstract The Southeast (SE) Asian tin belt is a major tin producer globally, with a prolonged mineralization history from the Permian to Paleogene (ca. 285–45 Ma). Tin deposits in this region are typically associated with tectonic settings that involve subduction and collision of the Paleo-, Meso-, and Neo-Tethys slabs. Ca. 40 Ma, a notable transition occurred in the tectonic regime of SE Tibet, with the Neo-Tethys subduction giving way to lateral extrusion of the Indochina block along major strike-slip faults. Previously, it was believed that this shift had brought tin mineralization to a halt. In this study, we present in situ laser ablation–inductively coupled plasma–mass spectrometry U-Pb cassiterite ages of 21–19 Ma from the Yunling tin deposit located in western Yunnan, China. Yunling produces gem-quality cassiterite that is transparent but contains low U contents, which renders usual U-Pb dating techniques unusable. To address this, a customized dating protocol involving cathodoluminescence (CL) imaging and testing of U distribution on crystallographically well-defined cassiterite crystals was applied. The study revealed two types of primary microstructures in cassiterite: volumetrically dominant concentric oscillatory growth zones and subordinate CL-dark sector zones. The U content shows a preferential enrichment in the CL-dark sector zones, typically tens of parts per million (ppm), which is two orders of magnitude greater than the U content in the concentric zone. This is significant, as the dating results (21–19 Ma) obtained through the targeted selection of CL-dark sector zones represent the youngest tin mineralization event in the SE Asian tin belt. Additionally, these results challenge the established belief that the ore-hosting Indosinian granite, dated to ca. 215 Ma, was related to Sn mineralization in the Yunling area. We suggest that emplacement of the early Neogene Sn mineralization at Yunling may be genetically connected to extensive delamination of the lithosphere in southeastern Tibet. The lithospheric delamination led to the upwelling and decompression partial melting of the asthenosphere, which provides a plausible explanation for the high temperature required for the release of Sn from biotite-dehydration melting of sedimentary protolith. The study also highlights the potential of Oligocene–Miocene-aged granites situated in the Sanjiang Tethys and adjacent areas of western Yunnan as prospective exploration targets for tin mineralization.

Provenance and depositional age of metasedimentary rocks in the Frontenac terrane (Grenville Province, Ontario)

The Mesoproterozoic Frontenac terrane in the southern Grenville Province of Ontario is separated by shear zones from the Composite Arc Belt to the west and the Adirondack Lowlands to the east. The majority of the terrane is made up of granulite-facies metasedimentary rocks that are the oldest lithologies recognized in the terrane. Five samples were selected for U–Pb geochronology to constrain (1) metamorphic age, (2) depositional age of sedimentary protoliths, and (3) source regions of detrital zircon. Two pelitic gneisses and a marble are dominated by metamorphic zircon, whereas two quartzites contain a diverse population of detrital zircon that are surrounded by metamorphic overgrowths. Metamorphic zircon have 206Pb/207Pb ages of 1.19–1.16 Ga, and a small population is 1.22 Ga. These ages correspond to the Shawinigan and Elzevirian orogenies and provide minimum ages for deposition. The youngest detrital grains with ages of 1.25–1.24 Ga provide maximum depositional ages. Quartzites (and pelitic gneisses) have a wide range of detrital zircon ages that reflect local Mesoproterozoic Grenville sources and Paleoproterzoic and Archean sources in the northern Grenville Province and elsewhere in Laurentia. Most notable is a large population of 1.9–1.8 Ga zircon, which points towards derivation from the Penokean orogen in the midcontinent or Makkovikian–Ketilidian orogen of Labrador and Greenland, indicating long sedimentary transport distances. The similarities in depositional ages and detrital zircon ages between Frontenac terrane and Adirondack metasedimentary rocks suggest a shared sedimentary history, which we interpret as deposition in the same Trans-Adirondack backarc basin at ca. 1.25 Ga.

Sedimentary protolith and high-P metamorphism of oxidized manganiferous quartzite from the Lanterman Range, northern Victoria Land, Antarctica

Abstract. We investigated the mineral assemblage, mineral and bulk-rock chemistry, and zircon U–Pb age of a manganiferous quartzite layer in the Lanterman Range, northern Victoria Land, Antarctica. The mineral assemblage consists primarily of phengite and quartz, along with spessartine-rich garnet, Mn3+ and rare earth element–yttrium (REY)-zoned epidote-group minerals, and titanohematite. Mineral inclusions such as tephroite, rutile and pyrophanite are hosted in porphyroblasts of the latter three minerals and suggest prograde blueschist-facies to low-T eclogite-facies metamorphism (M1). Epidote-group minerals commonly exhibit multiple growth zones of piemontite and/or epidote (M1), REY-rich piemontite (M2), REY-rich epidote (M3), and epidote (M4) from core to rim. Pseudobinary fO2–X diagrams at constant P–T support the stability of an epidote-group mineral-bearing assemblage under highly oxidized conditions during prograde M2 to peak M3 metamorphism. In marked contrast, tephroite-bearing assemblages (M1) are limited to relatively reduced environments and Mn-rich, silica-deficient bulk-rock compositions. Mn nodules have such characteristics, and the contribution of this hydrogenous component is inferred from bulk-rock chemical features such as a strong positive Ce anomaly. The major-element composition of the manganiferous quartzite suggests a protolith primarily consisting of a mixture of chert and pelagic clay. The presence of rare detrital zircons supports terrigenous input from a craton and constrains the maximum time of deposition to be ca. 546 Ma. The lack of arc-derived detrital zircons in the quartzite and the predominance of siliciclastic metasedimentary rocks among the surrounding rocks suggest that the deep-sea protolith was most likely deposited in an arc/back-arc setting at a continental margin. High-P metamorphism associated with terrane accretion during the Ross orogeny took place in the middle Cambrian (ca. 506 Ma), broadly coeval with the metamorphic peak recorded in the associated high-P rocks such as mafic eclogites. Finally, it is noteworthy that the high-P manganiferous quartzite was amenable to exhumation because the paleo-position of the protolith was likely distal from the leading edge of the downgoing slab.

Vanadian–Chromian Spinels (Sludyanka Metamorphic Complex, South Baikal Area). Magnesian Spinel

Abstract —The paper presents data on two groups of magnesian Cr–V spinel occurring as rock-forming minerals in various types of Cr–V bearing rocks of the Sludyanka metamorphic complex (South Baikal area, Siberia, Russia): (i) low-Al magnesiochromite–magnesiocoulsonite spinels and (ii) Al spinels varying from V-bearing aluminous magnesiochromite and Al–Cr coulsonite to spinel proper with minor contents of Cr and V, and with complex zoning patterns. Spinels in the Sludyanka rocks are also present as iron-magnesian accessories, among which high-Cr varieties are compositionally similar to mantle-derived spinel from igneous rocks and to inclusions in diamonds. Comparison of formation conditions for mantle spinels in igneous lithologies and spinel phases in metamorphic rocks shows that their mineral chemistry is mainly controlled by the bulk composition of the igneous and sedimentary protoliths, respectively. Detrital spinel may be a false indicator poorly applicable to paleogeodynamic reconstructions and diamond potential evaluation.

Geochronology, provenance, and tectonic setting of the meta-sedimentary rocks from the North Shahrekord metamorphic Complex, Iran

ABSTRACT The meta-sedimentary rocks from the North Shahrekord metamorphic Complex (NSMC) comprise micaschists, paragneisses, quartz-feldspathic schists, and marbles. Detrital zircons from the paragneisses yield ages of ca. 2811–507 Ma with most of the dated grains belonging to the Late Neoproterozoic to Cambrian, suggesting a maximum depositional age of the sedimentary protolith during the Late Ediacaran to the Early Cambrian times (543 ± 12 Ma). In contrast, detrital zircons from the quartz-feldspathic schists are mostly dominantly 692–577 Ma and a few at ca. 2369–703 Ma, suggesting that the maximum depositional age of 577 ± 9 Ma, Late Neoproterozoic. The age distribution of detrital zircons suggests that their main provenance was located within the Arabian-Nubian Shield and adjacent terranes. Rutiles from a paragneiss give a U-Pb lower-intercept age of 181 ± 3 Ma, indicating the occurrence of a high-pressure metamorphic event during the Early Jurassic. The trace element contents of the two rock units show enrichment in LREE relative to HREE and negative Eu anomalies, indicating upper continental crustal sources. The geochemical evidence (e.g. low to moderate Chemical Index of Alteration (CIA) and Plagioclase Index of Alteration, high Index of Compositional Variability (PIA), and low Th/U) suggests that the quartz-feldspathic schists and paragneisses originated from an immature, and immature to less mature, respectively, intermediate-felsic igneous source and their protolith experienced a simple sedimentary recycling history with relatively weak to moderate chemical weathering. Geochemical and petrographic data also suggest that the precursor to the quartz-feldspathic schists and paragneisses were deposited in a continental island arc and a back-arc basin setting, respectively. Our new data, including depositional age, provenance, and geochemical evidence, provide perspectives on palaeogeographic affinities (provenance of sediments with different weathering and recycling materials), and paleotectonic reconstructions (from arc to back-arc) of the Iranian basement, exposed in the Sanandaj-Sirjan Zone, during Ediacaran.

Identifying crustal contributions in the Patagonian Chon Aike Silicic Large Igneous Province

The volcanic rocks of the Chon Aike Silicic Large Igneous Province (CASP) are recognized as magmas dominantly produced by crustal anatexis. Investigating the zircon of the CASP provides an opportunity to gain further insight into geochemical and isotopic differences of the potential magmatic sources (i.e., crust versus mantle), to identify crustal reservoirs that contributed to the felsic magmas during anatexis, and to quantify the contributions of the respective sources. We present a combined zircon oxygen and hafnium isotope and trace element dataset for 16 volcanic units of the two youngest volcanic phases in Patagonia, dated here with LA-ICP-MS U–Pb geochronology at ca. 148–153 Ma (El Quemado Complex, EQC) and ca. 159 Ma (western Chon Aike Formation, WCA). The EQC zircon have 18O-enriched values (δ18O from 7 to 9.5‰) with correspondingly negative initial εHf values (− 2.0 to − 8.0). The WCA zircon have δ18O values between 6 and 7‰ and εHf values ranging between − 4.0 and + 1.5. Binary δ18O-εHf mixing models require an average of 70 and 60% melt derived from partial melting of isotopically distinct metasedimentary basements for the EQC and WCA, respectively. Zircon trace element compositions are consistent with anatexis of sedimentary protoliths derived from LIL-depleted upper continental crustal sources. The overlap between a high heat flux environment (i.e., widespread extension and lithospheric thinning) during supercontinental breakup and a fertile metasedimentary crust was key in producing voluminous felsic volcanism via anatexis following the injection and emplacement of basaltic magmas into the lower crust.

Detrital Zircon Geochronology and Provenance of Metasedimentary Rocks from the Susong Complex Zone in the Dabie Orogen

AbstractThe Susong complex zone is a relatively low‐grade metamorphic unit located in the southern part of the Dabie orogen and preserves a variety of metasedimentary rocks, mostly with epidote–amphibolite facies. However, their depositional age, provenance and tectonic setting of sedimentary protolith remain controversial due to the lack of fossils, precise dating and integrated geochemical investigation. This study has conducted whole‐rock elemental, and zircon U‐Pb SHRIMP dating and Lu‐Hf isotope analyses on three types of representative metasedimentary rocks including garnet‐bearing mica‐quartz schist, graphite‐muscovite‐quartz schist and dolomitic marble from the Susong complex zone. The U‐Pb SHRIMP dating data indicate that the sedimentary protolith of these rocks have the maximum depositional ages of less than 840–750 Ma and have various sedimentary provenances. In combination with zircon Lu‐Hf isotope compositions, the provenance of the metasedimentary rocks in the region is for the first time documented to be mainly derived from four groups of magmatic rocks formed at ∼2.5 Ga, ∼2.0 Ga, ∼1.4 Ga and ∼0.8 Ga in response to four episodes of igneous activity in the northeastern margin of the Yangtze Block. The conventional geothermobarometry combined with rare metamorphic zircon ages indicate that the studied rocks underwent the Late Triassic continental subduction‐related metamorphism with peak epidote–amphibolite facies conditions at P = 0.34–0.91 GPa and T = 427–532°C. In addition, results of the elemental contents (i.e., La, Ce, Th and ΣREE) and ratios (i.e., Eu/Eu* and LaN/YbN) suggest that the protoliths of the metasedimentary rocks were mainly shales, wackes and limestones, most probably related to the Rodinia supercontinent rifting along the northern margin of the Yangtze Block during the Neoproterozoic.

Mercury abundance and isotopic composition in granitic rocks: Implications for Hg cycling in the upper continental crust

Mercury (Hg) is a highly volatile metal exhibiting both isotope mass-dependent (MDF, defined as δ202Hg) and mass-independent (MIF, expressed as Δ199Hg) fractionation. Assessing the Hg isotopic composition of the upper continental crust is crucial for the use of this new geochemical tool for petrogenetic tracing, particularly for understanding crust-mantle interaction. Here, we report Hg isotopic compositions of granitic rocks with distinct source affinity (I-, A-, and S-type) and of metasedimentary enclaves from the South China Craton. The results of more than 100 rock samples show large δ202Hg variations of −2.03 to 0.47 ‰ and small Δ199Hg variations of −0.16 to 0.09 ‰. The S-type granites studied here exhibit higher δ202Hg values (−0.58 to 0.00 ‰; n = 57) than their sedimentary protoliths (metasedimentary enclaves; −2.03 to −0.91 ‰; n = 7), suggesting significant Hg-MDF during magmatic processes. The Δ199Hg values of S-type granites (−0.08 to 0.09 ‰) are indistinguishable from their sedimentary protoliths (−0.16 to 0.02 ‰), suggestive of the absence of Hg-MIF during crustal anatexis and subsequent magmatic differentiation. The I- and A-type granites studied have smaller Δ199Hg variations of −0.11 to 0.04 ‰ (n = 28) and −0.07 to 0.04 ‰ (n = 15), respectively, but are within the range of the S-type granites. The compositional range of all granite variants may be explained by the variable intensity of large-scale MASH (melting-assimilation-storage-homogenization) processes. Our new data combined with previously published data of igneous, sedimentary, and metamorphic rocks allow us to estimate that the upper continental crust (UCC) has a Hg abundance of 13.5 ppb and a weighted average δ202Hg of −1.15 ± 1.01 ‰ (2SD), both of which are higher than the corresponding values of the primitive mantle. However, the weighted average Δ199Hg value of the UCC (0.03 ± 0.15 ‰; 2SD) is nondistinguished from the primitive mantle, suggesting no obvious Hg-MIF during the formation and differentiation of the continental crust.

Zircon U-Pb geochronology of the Lan Sang gneisses and its tectonic implications for the Mae Ping shear zone, NW Thailand

The Mae Ping shear zone (MPSZ), a major shear zone trending NW-SE in Thailand, is responsible for the left-lateral displacement of the N-S Triassic-Jurassic granitoid and gneiss belt. This displacement is postulated to have contributed to Cenozoic extrusion tectonics. Within the Lan Sang National Park, the MPSZ exposes several intensely deformed lithologies, collectively known as the Lan Sang gneisses. These gneisses have attracted considerable attention for their potential to substantiate the extrusion model. However, the timing of the emplacement of the orthogneiss protolith is still debated. Moreover, the origin and distribution of the Eocene syn-shearing granodiorite within this shear zone are not well understood. To shed light on the magmatic history of the MPSZ, this study utilized zircon U-Pb geochronology to systematically investigate the Lan Sang gneisses. Our findings demonstrate that these gneisses can be categorized into paragneiss and orthogneiss groups. Paragneiss samples feature zircons displaying rounded detrital cores ranging from 3,078 to 450 Ma, with metamorphic rim overgrowth of ca. 200 Ma (most Th/U <0.01). This indicates that their Paleozoic sedimentary protoliths experienced high-grade metamorphism during the Triassic-Jurassic Indosinian orogeny. On the other hand, zircon from orthogneiss samples shows that their magmatic protoliths were predominantly emplaced either around ∼200 Ma or within 45-32 Ma. The Eocene-Oligocene magmatism likely coincided with the proposed Eocene metamorphism. Since these samples were deformed by left-lateral shearing, the left-lateral motion of the MPSZ probably ended after 32 Ma. Eocene-Oligocene magmatic events have also been identified in granite, mylonite, and gneiss samples from other regions along the Sibumasu terrane, including the Three Pagodas, Klaeng, Ranong, Khlong Marui shear zones, and the Doi Inthanon area. The Eocene-Oligocene magmatism was likely linked with the movement of the shear zones and may be responsible for the regional cooling pattern. The spatial and temporal distribution of the Eocene-Oligocene magmatism within the Sibumasu terrane supports the hypothesis that the inward migration of magmatism in the overriding plate resulted from the shallowing of the Neo-Tethyan slab.

Cristobalite Clinker and Paralavas of Ferroan and Melilite–Nepheline Types in the Khamaryn-Khural–Khiid Combustion Methamorphic Complex, East Mongolia: Formation Conditions and Processes

Abstract—Rock samples from the Khamaryn-Khural–Khiid combustion metamorphic (CM) complex, including cristobalite clinker, ferroan tridymite–sekaninaite and cristobalite–fayalite paralavas, which are rock types new to the complex, as well as clinker xenoliths in melilite–nepheline paralava, have been studied in terms of chemistry and mineralogy. The obtained data on rock-forming, minor, accessory, and rare phases (silica polymorphs, cordierite-group minerals, fayalite, Fe and Ti oxides, ferrosilite, etc.) have implications for the formation conditions and processes of the CM rocks. The Raman spectra of sekaninaite, indialite, ferroindialite, mullite, and anhydrous Fe–Ca–Mn phosphate, presumably from the graftonite group, have several specific features. The diversity of mineral assemblages in the CM rocks is due to heterogeneous lithology of the sedimentary protolith and to local effects in the multistage history of the Khamaryn-Khural–Khiid complex. According to geochemical data, all CM rocks of the complex are derived from the Early Cretaceous Dzunbain Formation, their protolith molten to different degrees. The cristobalite clinker and tridymite–sekaninaite and cristobalite–fayalite paralavas were produced by partial melting of pelitic rocks containing different amounts of iron in a wide temperature range. The formation of mullite developed from dehydration–dehydroxylation and incongruent partial melting of amorphous pelitic matter. Large-scale crystallization of mullite in clinker, occurred from the high-silica potassic aluminosilicate melt at >850 °C. Combustion of subsurface coal seams heated the overburden to >1050 °C or locally to >1300–1400 °C (melting point of detrital quartz) or even, possibly, to >1470 °C corresponding to the stability field of β-cristobalite. Melilite–nepheline paralava was formed by incongruent melting of silicate (pelitic) and carbonate (calcite) components of marly limestone under elevated CO2 partial pressure. Oxygen fugacity (fO2) during combustion metamorphism changed from strongly reducing conditions favorable for crystallization of Fe phosphides (barringerite, schreibersite) and metallic iron from silica-undersaturated melts parental to melilite–nepheline paralava to high fO2 values that can maintain the formation of hematite in Fe-rich CM rocks.

Early Paleozoic crustal anatexis during Wuyi-Yunkai orogenesis: Insights from zircon of Fuhuling migmatites in the Yunkai region, South China

Abstract Crustal anatexis is an important process in the tectonic evolution of many orogenic systems. In the Wuyi-Yunkai orogen in the South China block, the duration of partial melting and its relationship with orogenesis are poorly constrained. In this study, we present a multifaceted approach to determine the timing of anatexis and unravel the petrogenesis of Fuhuling migmatites in the Yunkai region of the southwestern South China block. Geochemical analyses indicate that the migmatites have (meta-)sedimentary protoliths. The absence of anhydrous peritectic minerals but the presence of microstructural and outcrop-scale indicators of partial melting suggest that the Fuhuling migmatites experienced fluid-present melting. Complex zoning and variable trace element concentrations in newly formed zircons in migmatites reflect their evolutionary histories during partial melting. Anatectic melt was present at Fuhuling in the Yunkai region from ca. 449–427 Ma during early Paleozoic Wuyi-Yunkai orogenesis. The wide variety of morphologies observed in the Fuhuling migmatites implies that migmatites in the Yunkai region experienced incipient partial melting, melt segregation, and melt migration. Combining new and previous results, we argue that the Yunkai region experienced two stages of crustal anatexis during the early Paleozoic, which may have been triggered by crustal thickening followed by rapid exhumation and orogenic collapse during the intra-plate Wuyi-Yunkai orogeny in the South China block.

Timescales and mechanisms of felsic lower continental crust formation: Insights from U-Pb geochronology of detrital zircon (Malenco Unit, eastern Central Alps)

Burial of supracrustal sedimentary material is one of the processes that contribute to the formation of the lower continental crust. We investigate the rate of this process in Permian lower continental crust from the Malenco Unit (eastern Central Alps) by constraining the age of protolith deposition and subsequent high-grade metamorphism of felsic, garnet-rich granulites. Detrital zircon cores, many of which are small (<50 μm), were dated by SIMS and yield concordant dates ranging from 387 ± 21 Ma (2σ) to 2380 ± 16 Ma, with the vast majority of the dates falling in the range 450–1000 Ma. For the seven cores in each sample that gave the youngest concordant dates, replicate analyses were carried out. None of these cores had all measured U-Pb dates agree within error, indicating significant disturbance by the Permian granulite facies metamorphism. A 206Pb/238U age of 424 ± 6 Ma for a core with two overlapping replicate analyses is the best available constraint on the maximum depositional age of the sedimentary protolith. This maximum depositional age also coincides with the first significant population in the probability density plot of detrital core dates, which is a double peak at ∼425 Ma and ∼450 Ma.Zircon detrital cores are separated from metamorphic overgrowths by a small seam of zircon that is riddled with tiny inclusions of quartz, biotite and muscovite. The first generation of metamorphic zircon rims has a 206Pb/238U age of 272.9 ± 2.8 Ma, displays steep heavy rare earth element (HREE) patterns and a moderate negative Eu-anomaly, and returns Ti-in-zircon temperatures of 740–780 °C. The second generation of metamorphic rims has a 206Pb/238U age of 263.8 ± 2.6 Ma, a flat HREE pattern and a pronounced negative Eu-anomaly, and gave Ti-in-zircon temperatures of 780–810 °C. Collectively these observations indicate that the first zircon rim formed on the prograde path at the onset of partial melting where muscovite was present but the rocks contained little garnet and no K-feldspar. Therefore, the metapelites resided at lower amphibolite facies, subsolidus conditions up until the intrusion of a Permian gabbro, which was emplaced shortly after the formation of the first generation of metamorphic zircon and caused heating to granulite facies conditions and widespread partial melting. There is no record of high-pressure metamorphism preceding granulite facies conditions, indicating that felsic lower crust in the Malenco unit was not formed by relamination.The Malenco unit was situated at the north-eastern active margin of Gondwana 420 Ma ago. Subduction-related accretion of sediments at lower crustal levels shortly after their deposition could explain the formation of this felsic lower crust that resided at subsolidus conditions for up to 100 My prior to Permian extension, gabbro intrusion and granulite facies metamorphism.

Metamorphic origin of stratiform cassiterite mineralization in the Schwarzenberg -Aue district – Clues to the metamorphic history and pre-orogenic Sn enrichment of the Erzgebirge (Germany)

Here we present petrographic and field observations, mineral and whole-rock compositions as well as conventional thermobaromerty and thermodynamic modelling of the Sn-mineralized schists near Bockau, Erzgebirge (Germany). The metamorphic mineral assemblage comprises locally abundant cassiterite (up to 2 wt%), which exhibits metamorphic features indicating pre-orogenic Sn enrichment of the sedimentary protoliths. The results imply that the composite schist sequence of Bockau underwent regional metamorphism at 0.8–0.9 GPa and 550 ± 50 °C and a subsequent relatively hot-exhumation path between 600 and 700 °C. Flat compositional zoning profiles of garnet suggest that these elevated temperature conditions were not short-lived but likely lasted for a time period of 20 to 40 Ma leading to the development of retrograde mineral assemblages randomly overgrowing cassiterite. The textural position of cassiterite indicates that its formation is predominantly related to the prograde/collisional stage of the Variscan orogeny (∼340 Ma) and therefore is linked to metamorphic reactions and hence pre-dates widespread LiSn granites of the area (325–310 Ma). The presented observations of the Bockau schists provide the first direct evidence for pre-orogenic Sn enrichment of their sedimentary protoliths. This has two important implications: first, the meta-sedimentary units of the Bockau series as a part of the Frauenbach super unit may host extensive, yet underexplored Sn resources along its entire strike length (> 40 km). Second, melting and assimilation of cassiterite-bearing Bockau schists may have significantly contributed to the formation of Sn-enriched granites within the Saxothuringian Zone of the European Variscides (and elsewhere). Hence, the presence of Sn-enriched (meta) sedimentary units could be an important prerequisite for Sn fertility of a metallogenic region. The ultimate pre-metamorphic source and the cause of sedimentary Sn-enrichment remain poorly constrained.

Synchronous formation of the ‘forearc’ Bay of Islands ophiolite and its basal high-temperature metamorphic sole constrained by U–Pb zircon ages

The welded metamorphic sole at the base of the Bay of Islands Ophiolite Complex (BOIC) in the Northern Appalachians of Newfoundland shows a typical inverted pressure-temperature (P-T) metamorphic gradient from HT-MP granulite to LT-LP greenschist facies. It incorporates mafic volcanic/plutonic protoliths mixed with pelagic, hemi-pelagic and coarser epiclastic sedimentary protoliths. New LA-ICP-MS U–Pb concordia ages, trace elements, and Ti-in-zircon geothermometry for ∼250 zircon analyses from three metabasites of the upper HT sole amphibolites with N-MORB-like protoliths are reported. Two samples collected within meters of the ophiolite peridotite-sole contact of the Blow Me Down Mountain and North Arm Mountain massifs yielded the oldest comparable concordia ages of 487.7±2.6 Ma and 489.1±3.1 Ma, respectively, that are both within error of the igneous age of 488.3±1.5 Ma of the directly overlying BOIC ophiolite, which formed at a supra-subduction zone (SSZ) forearc spreading center. A third slightly younger age of 484.2±2.4 Ma was obtained for an upper HT amphibolite sample with similar phase assemblages but collected ∼30 m below the peridotite contact of the Table Mountain massif. Zircon crystals analyzed have similar size and morphologies, subparallel rare earth element (REE) variation patterns, and steep heavy REE-enrichments ((Lu/Gd)cn >20), significant positive Ce anomalies (dominantly >5) and slight positive to dominantly negative Eu anomalies (1.2 – 0.4). Zircon shows Th/U mean values of 0.37 – 0.48 with little to no rim to core variation. Minimum Ti-in-zircon mean crystallization temperatures range from ∼764 – 787 °C. These neocrystallized zircon crystals appear to be derived from thin leucosomes within the three amphibolites. Two other samples also from the upper HT sole show evidence of inherited detrital zircon with core dates spanning the Cambrian Notre Dame Arc through older Laurentian-like basement and rift age ranges.Subcretion of the sole took place below a hot forearc asthenospheric wedge, that is, a consequence of the newly-formed BOIC forearc spreading center extending from the back arc to a triple junction along the westward- (or paleo-northward) verging trench of the Notre Dame arc. The early HT sole formation age at ca. 489–488 Ma is long prior to initiation of obduction at ca. 470 Ma and long after initiation of subduction beneath the paleo-northward verging Notre Dame peri-Laurentian arc at ca. 514 Ma. This indicates Newfoundland sole ages of the BOIC and St. Anthony Complex are correlated with the age of SSZ spreading, but not necessarily subduction initiation because previously existing and self-sustaining subduction was ongoing. Sole ages are then not correlated with the younger age of obduction-related orogenic events (e.g., proposed Taconic I and II) in the Newfoundland Appalachians.

Grenvillian evolution of the Qaidam block and its position in Rodinia constrained by U–Pb–Hf composition of detrital zircons from the Altyn Tagh, Northern Tibet

The U–Pb ages and Hf isotopic composition of detrital zircons provide important constraints on basin evolution and paleogeography. The Qaidam block, a continental fragment along the northeastern margin of the Tibetan Plateau, has been suggested to have been either in an internal or a peripheral position in Rodinia. We present a systematic study of late Mesoproterozoic to Ediacaran sedimentary sequences from the Altyn Tagh belt, a part of the Qaidam block displaced by the Altyn Tagh fault, in an effort to establish its position within Rodinia. The (meta-)sedimentary rocks of the Altyn Complex of South Altyn can be correlated with the Taxidaban Group, the part of the basement(meta-)sedimentarysequence of Central Altyn, on the basis of lithological and geochronological similarities. Both of these were deposited in the late Mesoproterozoic to early Neoproterozoic. The early Neoproterozoic Suoerkuli Group of Central Altyn and its coeval magmatism formed in an extensional setting. This extensional episode facilitated thinning of the lithosphere during the late Tonian–Ediacaran when the sedimentary protoliths of the Hongliuquan Complex were deposited. Detrital zircon grains from late Mesoproterozoic to Ediacaran sedimentary sequences in the Altyn Tagh orogenic belt show a wide distribution of Meso- and Paleoproterozoic ages between 1800 and 1000 Ma, which match well with contemporaneous supracrustal sequences in northeastern Laurentia. In combination with the similarity in late Mesoproterozoic to Ediacaran tectono-thermal events, we propose the Qaidam block was located along the northeast Laurentian margin during the late Meso- to Neoproterozoic assembly of Rodinia.