Secondary Amine Groups Research Articles

Molecular Topology for the Discovery of New Broad-Spectrum Antibacterial Drugs.

In this study, molecular topology was used to develop several discriminant equations capable of classifying compounds according to their antibacterial activity. Topological indices were used as structural descriptors and their relation to antibacterial activity was determined by applying linear discriminant analysis (LDA) on a group of quinolones and quinolone-like compounds. Four equations were constructed, named DF1, DF2, DF3, and DF4, all with good statistical parameters such as Fisher–Snedecor’s F (over 25 in all cases), Wilk’s lambda (below 0.36 in all cases) and percentage of correct classification (over 80% in all cases), which allows a reliable extrapolation prediction of antibacterial activity in any organic compound. From the four discriminant functions, it can be extracted that the presence of sp3 carbons, ramifications, and secondary amine groups in a molecule enhance antibacterial activity, whereas the presence of 5-member rings, sp2 carbons, and sp2 oxygens hinder it. The results obtained clearly reveal the high efficiency of combining molecular topology with LDA for the prediction of antibacterial activity.

Alpha-Glucosidase Inhibitory Effect of Psychotria malayana Jack Leaf: A Rapid Analysis Using Infrared Fingerprinting.

The plant Psychotria malayana Jack belongs to the Rubiaceae family and is known in Malaysia as “meroyan sakat/salung”. A rapid analytical technique to facilitate the evaluation of the P. malayana leaves’ quality has not been well-established yet. This work aimed therefore to develop a validated analytical technique in order to predict the alpha-glucosidase inhibitory action (AGI) of P. malayana leaves, applying a Fourier Transform Infrared Spectroscopy (FTIR) fingerprint and utilizing an orthogonal partial least square (OPLS). The dried leaf extracts were prepared by sonication of different ratios of methanol-water solvent (0, 25, 50, 75, and 100% v/v) prior to the assessment of alpha-glucosidase inhibition (AGI) and the following infrared spectroscopy. The correlation between the biological activity and the spectral data was evaluated using multivariate data analysis (MVDA). The 100% methanol extract possessed the highest inhibitory activity against the alpha-glucosidase (IC50 2.83 ± 0.32 μg/mL). Different bioactive functional groups, including hydroxyl (O-H), alkenyl (C=C), methylene (C-H), carbonyl (C=O), and secondary amine (N-H) groups, were detected by the multivariate analysis. These functional groups actively induced the alpha-glucosidase inhibition effect. This finding demonstrated the spectrum profile of the FTIR for the natural herb P. malayana Jack, further confirming its medicinal value. The developed validated model can be used to predict the AGI of P. malayana, which will be useful as a tool in the plant’s quality control.

In situ growth of COF-rLZU1 on the surface of silica sphere as stationary phase for high performance liquid chromatography

The composite materials consist of Covalent Organic Frameworks (COFs) and silica have been regarded as a kind of promising stationary phases due to combination of the large specific surface area and good mechanical strength of porous silica microspheres and the porous structure and the excellent stability of COFs. Herein, a novel COFs-silica composite (SiO2@rLZU1, reduced Lan Zhou University-1) was prepared via an in-situ growth strategy with a 32 nm-thick COFs layer on the surface of silica and a 2.2 nm-thick COFs layer on the inner surface of the mesopores of spherical silica (5 μm, 120 Å). With secondary amine and phenyl groups, the novel stationary phase provided hydrophilic, hydrophobic and π-π interactions when used in HPLC, showing different selectivity from typical reversed-phase stationary phases. Probe molecules with aromatic moieties varying in polarity, including acidic (phenol, pyrocatechol, and pyrogallol), basic (aniline, 4-chloroaniline, and 4-nitroaniline) and neutral (benzene homologues) compounds, were all baseline separated on the SiO2@rLZU1 column, indicating its excellent separation performance. Besides, the SiO2@rLZU1 column also exhibited great repeatability with intraday RSDs of the retention time of three anilines less than 0.31% (n = 6) and peak area less than 1.63% (n = 6). On the SiO2@rLZU1 column, satisfied results were achieved in the separation of real samples such as fullerenes and coking wastewater, suggesting the great potential of the as-synthesized stationary phase in HPLC applications.

Radiolytic stability of pillar[5]arene-based diglycolamides

Abstract Radiolytic stability of pillar[5]arene-based diglycolamides (P5DGAs) against gamma irradiation up to 1000 kGy adsorbed dose was studied. The results reveal the increase of radiation damage degree on P5DGAs with dose. The radiolysis products of P5DGAs including the gaseous and solid products were fully characterized by 1H NMR, HR-ESI-MS, GC, and HPLC techniques. It was found that the main radiolytic gas products of P5DGAs under argon are H2, N2, CO and gaseous hydrocarbons. The solid degradation products contain phenolic hydroxyl groups and secondary amine groups. In addition, solvent extraction toward Eu(III) was performed with P5DGAs, in which about 50% decrease on extraction efficiency was observed for irradiated P5DGAs with dose of 1000 kGy in comparison with the non-irradiated one. A radiolytic degradation pathway was also proposed based on the above results. This is the first time to investigate the radiolytic stability of neat P5DGAs and P5DGAs in molecular diluent in detail and provides useful information for further application of P5DGAs in practical applications for spent fuel reprocessing.

Fabrication of unimolecular micelle-based nanomedicines from hyperbranched polymers containing both terminal and internal reactive groups

Unimolecular micelles are an attractive type of nanocarriers for drug delivery, but developing unimolecular micelle-based nanomedicine with high drug loading capacity and excellent unimolecular stability is challenging. Herein, we report the design and synthesis of hyperbranched polymers containing both terminal and internal reactive groups for fabricating the unimolecular micelle-based nanocarriers with high drug loading ability and superior unimolecular stability using selective modification. Specifically, we synthesized hyperbranched poly(amino ester)s containing terminal acrylate groups and internal R groups (named HBPAE-R) via the Michael addition polymerization of A2 + BʹB2-R monomers, wherein A represents acrylate, and B, Bʹ represents the hydrogen in primary amine and secondary amine group, respectively, whereas R represents hydroxy, alkene or alkyne groups that do not participate in the polymerization process but assist in additional modification. Then, poly(ethylene glycol) (PEG) chains were linked to the surface of HBPAE-OH (representative molecules) with the subsequent conjugation of doxorubicin (DOX, representative drug) to the internal hydroxy groups through an acid-labile hydrazide bond, to afford anti-cancer drug-loaded hyperbranched star copolymers PEG-HBPAE-DOX. The obtained nanomedicines exhibited good unimolecular stability, relatively high drug loading content and a controlled drug release behavior. The in vitro cytotoxicity experiments further demonstrated the anti-tumor efficacy of these unimolecular nanomedicines. Our approach is expected to further boost research on the fabrication of multifunctional unimolecular nanomedicines from hyperbranched polymers containing both terminal and internal reactive groups.

Single-Molecule Orthogonal Double-Click Chemistry-Inorganic to Organic Nanostructure Transition.

Thiasilacyclopentane (TSCP) and azasilacyclopentane (ASCP) heteroatom cyclics have proven capable of rapidly converting hydroxylated surfaces to functionalized surfaces in inorganic click reactions. In this work, we demonstrate that the use of these reagents can be extended to "simultaneous double-clicking" when both inorganic and organic substrates are present at the onset of the reaction. The simultaneous double-click depends on a first ring-opening click with an inorganic substrate that is complete in ∼1 s at 30 °C and results in the reveal of a cryptic mercaptan or secondary amine group, which can then participate in a second click with an organic substrate. TSCPs and ASCPs can take part in tandem double-click reactions in which the organic substrate is added to the reaction mixture after the initial inorganic click reaction is completed. Additionally, ASCPs with exocyclic functionality, specifically N-alkenyl-, N-aminoalkyl, and N-alkynyl-ASCPs, are shown to be options for tandem double-clicking in which functionalization proceeds in two independent steps and the sequence of the double-click reaction can be reversed.

Detection and quantification of glycosylated queuosine modified tRNAs by acid denaturing and APB gels.

Queuosine (Q) is a conserved tRNA modification in bacteria and eukaryotes. Eukaryotic Q-tRNA modification occurs through replacing the guanine base with the scavenged metabolite queuine at the wobble position of tRNAs with G34U35N36 anticodon (Tyr, His, Asn, Asp) by the QTRT1/QTRT2 heterodimeric enzyme encoded in the genome. In humans, Q-modification in tRNATyr and tRNAAsp are further glycosylated with galactose and mannose, respectively. Although galactosyl-Q (galQ) and mannosyl-Q (manQ) can be measured by LC/MS approaches, the difficulty of detecting and quantifying these modifications with low sample inputs has hindered their biological investigations. Here we describe a simple acid denaturing gel and nonradioactive northern blot method to detect and quantify the fraction of galQ/manQ-modified tRNA using just microgram amounts of total RNA. Our method relies on the secondary amine group of galQ/manQ becoming positively charged to slow their migration in acid denaturing gels commonly used for tRNA charging studies. We apply this method to determine the Q and galQ/manQ modification kinetics in three human cells lines. For Q-modification, tRNAAsp is modified the fastest, followed by tRNAHis, tRNATyr, and tRNAAsn. Compared to Q-modification, glycosylation occurs at a much slower rate for tRNAAsp, but at a similar rate for tRNATyr. Our method enables easy access to study the function of these enigmatic tRNA modifications.

Multiresponsive Spin Crossover Driven by Rotation of Tetraphenylborate Anion in an Iron(III) Complex

Dynamic molecular materials, which involve mechanical motions in crystals, usually exhibit tunable properties related to conformational polymorphs. Herein, we describe a solvent-free molecular crys...

Covalent organic framework incorporated outer-selective hollow fiber thin-film nanocomposite membranes for osmotically driven desalination

In this study, new outer-selective hollow fiber (OSHF) thin film nanocomposite (TFN) forward osmosis (FO) membranes incorporated with amine-rich Schiff-based network (SNW-1) nanoparticles (NPs), a type of covalent organic frameworks (COFs), were developed by vacuum-assisted interfacial polymerization (VAIP). The SNW-1 NPs possess hydrophilic nature and porous internal structures, which are desirable for producing highly permeable and efficient FO membranes. SNW-1 NPs were conformally packed across the outer surface of the HF substrate by vacuum pressure applied during the VAIP process leading to defect-free coatings. Furthermore, covalent bonding between secondary amine (NH2−) groups across the SNW-1 network and remanent carboxylic groups present from the monomer used for the interfacial polymerization step supported the adhesion of SNW-1 NPs to the native poly(amide) layer present across the TFN membrane surface. As a result, SNW-1 loading at 0.001 wt% exhibited the best FO performance with enhanced water flux more than 23% of the pristine one (31.5 L m−2 h−1) and relatively low specific reverse solute flux (SRSF, Js/Jw) at 0.18 g L−1 using 1 M NaCl and DI water in series of TFN composite membranes. The optimum loading at 0.001 wt% was much lower than those in other home-made TFN membranes (normally above 0.05 wt%) due to the minimum loss of SNW-1 in the VAIP. Also, the TFN membrane offered excellent FO operation stability tested for 72 h. Such novel approach is promising to optimize FO processes for desalination and water treatment in the future.

Direct diazotization of graphite nanoplatelets with melamine and their favorable application in epoxy resins

The ease of undesirable agglomeration and a low efficiency are two problems that restrict the application of graphite nanoplatelets (GNPs) in epoxy resins (EP). Herein, a new strategy with melamine (MEL) as the precursor to functionalize GNPs chemically, which form a bonding layer that is compatible with epoxy matrix, is reported. The MEL fragments with secondary amine groups were grafted uniformly on the GNPs surface by covalent junctions to exploit the diazonium chemistry. This behavior led to a better dispersion and a stronger interaction with the epoxy matrix and resulted in an enhanced glass transition temperature and bending strength, compared with the pure EP. When only 1 wt% functionalized GNPs (f‐GNPs) was used, the Tg of the modified EP raised of about 15°C compared with pure EP, and the bending strength increased by approximately 39%. The dielectric constant of the EP with f‐GNPs was impacted slightly, and the dielectric loss decreased. At 105 Hz, the dielectric loss of the EP with 1 wt% f‐GNPs decreased by approximately 11% compared with pure EP. Therefore, diazotization modification of the GNPs is a useful approach to improve the compatibility in nanoparticle networks.

One-Pot Fabrication of Pd Nanoparticles@Covalent-Organic-Framework-Derived Hollow Polyamine Spheres as a Synergistic Catalyst for Tandem Catalysis.

Facile fabrication of nanocatalysts consisting of metal nanoparticles (NPs) anchored on a functional support is highly desirable, yet remains challenging. Covalent organic frameworks (COFs) provide an emerging materials platform for structural control and functional design. Here, a facile one-pot in situ reduction approach is demonstrated for the encapsulation of small Pd NPs into the shell of COF-derived hollow polyamine spheres (Pd@H-PPA). In the one-pot synthetic process, the nucleation and growth of Pd NPs in the cavities of the porous shell take place simultaneously with the reduction of imine linkages to secondary amine groups. Pd@H-PPA shows a significantly enhanced catalytic activity and recyclability in the tandem dehydrogenation of ammonia borane and selective hydrogenation of nitroarenes through an adsorption-activation-reaction mechanism. The strong interactions of the secondary amine linkage with borane and nitroarene molecules afford a positive synergy to promote the catalytic reaction. Moreover, the hierarchical structure of Pd@H-PPA allows the accessibility of active Pd NPs to reactants.

Post-Synthetic Derivatization of Graphitic Carbon Nitride with Methanesulfonyl Chloride: Synthesis, Characterization and Photocatalysis.

Bulk graphitic carbon nitride (CN) was synthetized by heating of melamine at 550 °C, and the exfoliated CN (ExCN) was prepared by heating of CN at 500 °C. Sulfur-doped CN was synthesized by heating of thiourea (S-CN) and by a novel procedure based on the post-synthetic derivatization of CN with methanesulfonyl (CH3SO2−) chloride (Mes-CN and Mes-ExCN). The obtained nanomaterials were investigated by common characterization methods and their photocatalytic activity was tested by means of the decomposition of acetic orange 7 (AO7) under ultraviolet A (UVA) irradiation. The content of sulfur in the modified CN decreased in the sequence of Mes-ExCN > Mes-CN > S-CN. The absorption of light decreased in the opposite manner, but no influence on the band gap energies was observed. The methanesulfonyl (mesyl) groups connected to primary and secondary amine groups were confirmed by high resolution mass spectrometry (HRMS). The photocatalytic activity decreased in the sequence of Mes-ExCN > ExCN > CN ≈ Mes-CN > S-CN. The highest activity of Mes-ExCN and ExCN was explained by the highest amounts of adsorbed Acetic Orange 7 (AO7). In addition, in the case of Mes-ExCN, chloride ions incorporated in the CN lattice enhanced the photocatalytic activity as well.

Cationic poly(amide-imide)-conjugated camptothecin prodrug with variable nanomorphology for efficient reductive-responsive drug delivery

Poly(amide-imide)s (PAIs) present limited use in bioapplications due to their poor aqueous solubility and difficulty in functional accessibility. Herein, we prepared PAI-based prodrugs by leveraging aliphatic PAIs as the polymer scaffolds and conjugating camptothecin (CPT) via thiol-disulfide exchange reaction. The degree of CPT attachment can be smoothly controlled by initial feed ratios of PEG and a pyridinedisulfide-modified CPT precursor. Due to the abundant secondary amine groups in PAI backbones, amphiphilic PAI-CPT prodrugs self-assembled into cationic nanoparticles and showed an efficient cellular internalization (<2 h). The presence of disulfide linkers between PAI scaffolds and CPT endowed PAI-CPT prodrugs a reductive-responsive drug release profile. Moreover, when PAI-CPT prodrug nanoparticles were further used as nanocarriers, doxorubicin (DOX) was additionally encapsulated and variable nanomorphologies (nanospheres, branched nanoparticles) were obtained, and an enhanced chemotherapy efficacy was achieved as well.

Synthesis and Characterizations of Dipeptide Derivative of Gentamicin

Abstract&#x0D; The target derivative are gentamicin linked with L-Val- L-Ala by an ester linkage. These were synthesized by esterification method, which included the reaction of -OH hydroxyl group on (carbon No.5) of gentamicin with the acid chloride of the corresponding dipeptide, The preparation of new derivative of gentamicin involved protected the primary &amp; secondary amine groups of Gentamicin, by Ethylchloroformate (ECF) to give N-carbomethoxy Gentamicin which was used for further chemical synthesis involving the free hydroxyl groups.&#x0D; Then prepared dipeptide (L-Val- L-Ala) by conventional solution method in present DCC &amp; HoBt then reacted with thionyl chloride to prepared acid chloride of dipeptides, then after, linked by ester linkage to N-protection gentamicin in present pyridine as base, finally deportation the amino group of synthesized compound by using TFAA in present anisole.&#x0D; The characterization of the titled compounds were performed utilizing FTIR spectroscopy, CHNS elemental analysis, and by measurements of their physical properties.&#x0D;

Enhanced antifouling and separation properties of Tröger's base polymer ultrafiltration membrane via ring-opening modification

To prepare high performance and antifouling ultrafiltration (UF) membrane, the hydrophilic polymer of intrinsic microposity (Tröger's base) (TB) polymer was designed and obtained via ring-opening of Tröger's base moieties to form secondary amine groups. Subsequently, UF membranes were prepared readily with the ring-opened TB by phase inversion method. The ring-opened TB UF membrane exhibited higher surface hydrophilicity, surface porosity and total porosity than pristine TB membrane, which was ascribed to the improved hydrophilicity of polymer due to the presence of the hydrophilic secondary amine groups. Consequently, the pure water flux of ring-opened TB membrane as high as 154 L m−2 h−1 was achieved for TB-ro-58 membrane. This value was much higher than that of pristine TB membrane. Bovine serum albumin (BSA) was chosen as a model protein foulant to evaluate the separation efficiency and antifouling properties of the TB membranes by ultrafiltration and static protein adsorption experiments. High BSA rejections were obtained for all the ring-opened TB membranes (>95%) because of their more uniform surface pore size than pristine TB membrane. The ring-opened TB membranes showed much lower static protein adsorption and less irreversible fouling than TB membrane and the antifouling property was enhanced with increase in content of secondary amine groups. Therefore, the transformation of tertiary amine groups in the backbone of TB polymer into secondary amine groups is an effective approach for the fabrication of antifouling TB UF membranes.

Thin epoxy layers on native aluminium oxide: Specific ageing processes in mild conditions

Post-cured epoxy layers (EP, approx. 100 nm and 1 µm) of three amine hydrogen – oxirane ratios are prepared in dried air on natively oxidised aluminium substrate. A less crosslinked interphase forms as the consequence of adhesive interactions. Even though the layers exhibit very good durability in moist-warm air for up to 100 d, two stages of chemical ageing are revealed. During a short initial stage, some water absorbs firmly in the EP networks. Residual oxirane rings and secondary amine groups are shown to hydrolyse, while network chains remain intact. Marking the 2nd stage, dedicated autoxidation reactions are proven to simultaneously attack tertiary amine crosslinks and α-CH2 groups at phenylene ether units. These reactions destroy network chains, and the release of network fragments was established. Moreover, network destruction proceeds more effectively in 100 nm layers as the surface erodes slightly, even under the given environmentally mild conditions. That observation proves a specifically reduced durability for the interphase at the contact with native aluminium oxide.

Self-Assembled Polyurethane Capsules with Selective Antimicrobial Activity against Gram-Negative E. coli

This article reports the antimicrobial activity of two segmented amphiphilic polyurethanes, PU-1 and PU-2, containing a primary or secondary amine group, respectively. In acidic water, intrachain H-bonding among the urethanes followed by hierarchical assembly resulted in the formation of capsules (Dh = 120 ± 20 and 100 ± 17 nm for PU-1 and PU-2, respectively) with a highly positive surface charge. They showed selective interactions with bacterial cell mimicking liposomes over mammalian cell mimicking liposomes with favorable enthalpy and entropy contributions, which was attributed to the electrostatic interaction and hydrophobic effect. Antimicrobial studies with Escherichia coli revealed very low minimum inhibitory concentration (MIC) values of 7.8 and 15.6 μg/mL for PU-1 and PU-2, respectively, indicating their ability to efficiently kill Gram-negative bacteria. Killing of Gram-positive Staphylococcus aureus was noticed only at C = 500 μg/mL, indicating unprecedented selectivity for E. coli, which was further confirmed by scanning electron microscopy (SEM) studies. Hemolysis assay revealed HC50 values of 453 and 847 μg/mL for PU-1 and PU-2, respectively, which were >50 times higher than their respective MIC values, thus making them attractive antimicrobial materials. Ortho-nitrophenyl-β-galactoside (ONPG) assay and live-dead fluorescence assay confirmed that for both the polymers, a membrane disruption pathway was operative for wrapping of the bacterial membrane, similar to what was proposed for antimicrobial peptides. SEM images of polymer-treated E. coli bacteria helped in visualization of the pore formation and the disrupted membrane structure.

Selenium(VI) and copper(II) adsorption using polyethyleneimine-based resins: Effect of glutaraldehyde crosslinking and storage condition

This study synthesizes polyethyleneimine-glutaraldehyde (PEI-GA) resins using different amounts of GA to crosslink with a certain amount of PEI and compares these adsorbents for the adsorption of Cu(II) (cations) and Se(VI) (anions). Moreover, the stability of adsorption affinity of PEI-GA resins stored in open or sealed conditions is also studied. Results show that the amount of GA for PEI crosslinking does not affect the adsorption performance for Se(VI), especially when PEI/GA mass ratio is less than 2, while for Cu(II), the increase on GA amount decreases Cu(II) adsorption capacity. This difference is directly correlated to the change in the adsorption mechanism from electrostatic attraction to chelation. The primary and secondary amine groups on PEI can easily react with CO2 in the air to form carbamate, potentially affecting the adsorption performance of PEI. Results also indicate that the adsorption efficiency for Se(VI) is hardly affected by the storage condition, while that for Cu(II) decreases significantly after 20-day storage compared to the freshly prepared ones. In addition, all of the adsorbents can selectively remove Se(VI) from Se(VI)-As(V) system and Cu(II) from Pb(II)-Cu(II) system, indicating that the crosslinking has no significant influence on the selectivity.

The first structural characterization of the proton-ated aza-cyclam ligand in catena-poly[[[(perchlorato)copper(II)]-μ-3-(3-carb-oxy-prop-yl)-1,5,8,12-tetra-aza-3-azonia-cyclo-tetra-deca-ne] bis-(per-chlorate)

The asymmetric unit of the title com-pound, catena-poly[[[(perchlorato-κO)copper(II)]-μ-3-(3-carb-oxy-prop-yl)-1,5,8,12-tetra-aza-3-azonia-cyclo-tetra-decane-κ4 N 1,N 5,N 8,N 12] bis-(per-chlorate)], {[Cu(C13H30N5O2)(ClO4)](ClO4)2} n , (I), consists of a macrocyclic cation, one coordinated per-chlorate anion and two per-chlorate ions as counter-anions. The metal ion is coordinated in a tetra-gonally distorted octa-hedral geometry by the four secondary N atoms of the macrocyclic ligand, the mutually trans O atoms of the per-chlorate anion and the carbonyl O atom of the protonated carb-oxy-lic acid group of a neighbouring cation. The average equatorial Cu-N bond lengths [2.01 (6) Å] are significantly shorter than the axial Cu-O bond lengths [2.379 (8) Å for carboxyl-ate and average 2.62 (7) Å for disordered per-chlorate]. The coordinated macrocyclic ligand in (I) adopts the most energetically favourable trans-III conformation with an equatorial orientation of the substituent at the protonated distal 3-position N atom in a six-membered chelate ring. The coordination of the carb-oxy-lic acid group of the cation to a neighbouring com-plex unit results in the formation of infinite chains running along the b-axis direction, which are cross-linked by N-H⋯O hydrogen bonds between the secondary amine groups of the macrocycle and O atoms of the per-chlorate counter-anions to form sheets lying parallel to the (001) plane. Additionally, the extended structure of (I) is consolidated by numerous intra- and interchain C-H⋯O contacts.

Photophysical Properties of Emissive Pyrido[3,2-c]carbazole Derivatives and Apoptosis Induction: Development towards Theranostic Agents in Response to Light Stimulus.

Pyridocarbazole moieties are present in many natural products, such as olivacine and ellipticine, and their derivatives are well-known anticancer agents. To develop functional therapeutic and diagnostic compounds, three emissive pyrido[3,2-c]carbazole derivatives, PC-X, containing secondary or tertiary amine groups, were synthesized from an aminoquinoline derivative using a palladium complex as the catalyst. X-ray diffraction analyses revealed that PC-X showed highly planar structures between the pyridine ring and the carbazole framework, exhibiting high fluorescence intensities along with solvatochromic behavior. Imaging of HeLa cells treated with PC-X showed no specific accumulation into the organelles; however, a comparative examination showed that the accumulation in mitochondria was the highest as compared to nuclei and lysosomes. Cytotoxicity analysis using HeLa cells showed that PC-H, containing a secondary amine group showed the highest cytotoxicity (IC50 ≈20 μm) as compared to another PC-X having a tertiary amine group. Colocalization with MitoTracker, a typical mitochondrial staining dye, showed apoptosis-like behavior with remarkable appearance of blebbing during irradiation with near UV light (403 nm), suggesting that the PC-H may not only behave as a fluorescence probe for the imaging organelles, but also as a therapeutic agent for inducing apoptosis in HeLa cells, thereby functioning as a theranostic agent.